Merge branch 'develop' of github.com:lammps/lammps into kk_update_4.6.0

.github/CODEOWNERS

@@ -72,6 +72,8 @@ src/EXTRA-COMMAND/ndx_group.*       @akohlmey
 src/EXTRA-COMPUTE/compute_stress_mop*.* @RomainVermorel
 src/EXTRA-COMPUTE/compute_born_matrix.* @Bibobu @athomps
 src/EXTRA-FIX/fix_deform_pressure.* @jtclemm
+src/EXTRA-PAIR/pair_dispersion_d3.* @soniasolomoni @arthurfl
+src/EXTRA-PAIR/d3_parameters.h      @soniasolomoni @arthurfl
 src/MISC/*_tracker.*                @jtclemm
 src/MC/fix_gcmc.*                   @athomps
 src/MC/fix_sgcmc.*                  @athomps

.github/release_steps.md

@@ -1,42 +1,54 @@
 # LAMMPS Release Steps
 
-The following notes chronicle the current steps for preparing and publishing LAMMPS releases.  For
+The following notes chronicle the current steps for preparing and
-definitions of LAMMPS versions and releases mean, please refer to [the corresponding section in the
+publishing LAMMPS releases.  For definitions of LAMMPS versions and
-LAMMPS manual](https://docs.lammps.org/Manual_version.html).
+releases, please refer to [the corresponding section in the LAMMPS
+manual](https://docs.lammps.org/Manual_version.html).
 
 ## LAMMPS Feature Release
 
-A LAMMPS feature release is currently prepared after about 500 to 750 commits to the 'develop'
+A LAMMPS feature release is currently prepared after about 500 to 750
-branch or after a period of four weeks up to two months.  This is not a fixed rule, though, since
+commits to the 'develop' branch or after a period of four weeks up to
-external circumstances can cause delays in preparing a release, or pull requests that are desired to
+two months.  This is not a fixed rule, though, since external
-be merged for the release are not yet completed.
+circumstances can cause delays in preparing a release, or pull requests
+that are desired to be merged for the release are not yet completed.
 
 ### Preparing a 'next\_release' branch
 
 Create a 'next\_release' branch off 'develop' and make the following changes:
 
-- set the LAMMPS\_VERSION define to the planned release date in src/version.h in the format
+- set the LAMMPS\_VERSION define to the planned release date in
-  "D Mmm YYYY" or "DD Mmm YYYY"
+  src/version.h in the format "D Mmm YYYY" or "DD Mmm YYYY"
 - remove the LAMMPS\_UPDATE define in src/version.h
 - update the release date in doc/lammps.1
-- update all TBD arguments for ..versionadded::, ..versionchanged:: ..deprecated:: to the
+- update all TBD arguments for ..versionadded::, ..versionchanged::
-  planned release date in the format "DMmmYYYY" or "DDMmmYYYY"
+  ..deprecated:: to the planned release date in the format "DMmmYYYY" or
-- check release notes for merged new features and check if ..versionadded:: or ..versionchanged::
+  "DDMmmYYYY"
-  are missing and need to be added
+- check release notes for merged new features and check if
-Submit this pull request, rebase if needed.  This is the last pull request merged for the release
+  ..versionadded:: or ..versionchanged:: are missing and need to be
-and should not contain any other changes. (Exceptions: this document, last minute trivial(!) changes).
+  added
 
-This PR shall not be merged before **all** pending tests have completed and cleared. If needed, a
+Submit this pull request.  This is the last pull request merged for the
-bugfix pull request should be created and merged to clear all tests.
+release and should not contain any other changes. (Exceptions: this
+document, last minute trivial(!) changes).
+
+This PR shall not be merged before **all** pending tests have completed
+and cleared.  We currently use a mix of automated tests running on
+either Temple's Jenkins cluster or GitHub workflows.  Those include time
+consuming tests not run on pull requests.  If needed, a bug-fix pull
+request should be created and merged to clear all tests.
 
 ### Create release on GitHub
 
-When all pending pull requests for the release are merged and have cleared testing, the
+When all pending pull requests for the release are merged and have
-'next\_release' branch is merged into 'develop'.
+cleared testing, the 'next\_release' branch is merged into 'develop'.
 
-Check out 'develop' locally, pull the latest changes, merge them into 'release', apply a suitable
+Check out or update the 'develop' branch locally, pull the latest
-release tag (for historical reasons the tag starts with "patch_" followed by the date, and finally
+changes, merge them into 'release' with a fast forward(!) merge, and
-push everything back to GitHub. Example:
+apply a suitable release tag (for historical reasons the tag starts with
+"patch_" followed by the date, and finally push everything back to
+GitHub.  There should be no commits made to 'release' but only
+fast forward merges.  Example:
 
 ```
 git checkout develop
@@ -44,65 +56,315 @@ git pull
 git checkout release
 git pull
 git merge --ff-only develop
-git tag -s -m "LAMMPS feature release 19 November 2024" patch_19Nov2024
+git tag -s -m "LAMMPS feature release 4 February 2025" patch_4Feb2025
 git push git@github.com:lammps/lammps.git --tags develop release
 ```
 
-Go to https://github.com/lammps/lammps/releases and create a new (draft) release page or check the
+Applying this tag will trigger two actions on the Temple Jenkins cluster:
-existing draft for any necessary changes from pull requests that were merged but are not listed.
+- The online manual at https://docs.lammps.org/ will be updated to the
-Then select the applied tag for the release in the "Choose a tag" dropdown list. Go to the bottom of
+  state of the 'release' branch.  Merges to the 'develop' branch will
-the list and select the "Set as pre-release" checkbox.  The "Set as the latest release" button is
+  trigger updating https://docs.lammps.org/latest/ so by reviewing the
+  version of the manual under the "latest" URL, it is possible to preview
+  what the updated release documentation will look like.
+- A downloadable tar archive of the LAMMPS distribution that includes the
+  html format documentation and a PDF of the manual will be created and
+  uploaded to the download server at https://download.lammps.org/tars
+  Note that the file is added, but the `index.html` file is not updated,
+  so it is not yet publicly visible.
+
+Go to https://github.com/lammps/lammps/releases and create a new (draft)
+release page with a summary of all the changes included and references
+to the pull requests they were merged from or check the existing draft
+for any necessary changes from pull requests that were merged but are
+not listed.  Then select the applied tag for the release in the "Choose
+a tag" drop-down list. Go to the bottom of the list and select the "Set
+as pre-release" checkbox.  The "Set as the latest release" button is
 reserved for stable releases and updates to them.
 
-If everything is in order, you can click on the "Publish release" button.  Otherwise, click on "Save
+If everything is in order, you can click on the "Publish release"
-draft" and finish pending tasks until you can return to edit the release page and publish it.
+button.  Otherwise, click on "Save draft" and finish pending tasks until
+you can return to edit the release page and publish it.
 
-### Update download website, prepare pre-compiled packages, update packages to GitHub
+### Prepare pre-compiled packages, update packages to GitHub
 
-Publishing the release on GitHub will trigger the Temple Jenkins cluster to update
+A suitable build environment is provided with the
-the https://docs.lammps.org/ website with the documentation for the new feature release
+https://download.lammps.org/static/fedora41_musl_mingw.sif container
-and it will create a tarball for download (which contains the translated manual).
+image.  The corresponding container build definition file is maintained
+in the tools/singularity folder of the LAMMPS source distribution.
 
-Build a fully static LAMMPS installation using a musl-libc cross-compiler, install into a
+#### Fully portable static Linux x86_64 non-MPI binaries
-lammps-static folder, and create a tarball called lammps-linux-x86_64-19Nov2024.tar.gz (or using a
+
-corresponding date with a future release) from the lammps-static folder and upload it to GitHub
+The following commands use the Fedora container to build a fully static
+LAMMPS installation using a musl-libc cross-compiler, install it into a
+`lammps-static` folder, and create a tarball called
+`lammps-linux-x86_64-4Feb2025.tar.gz` (or using a corresponding date
+with a future release) from the `lammps-static` folder.
+
+``` sh
+rm -rf release-packages
+mkdir release-packages
+cd release-packages
+wget https://download.lammps.org/static/fedora41_musl.sif
+apptainer shell fedora41_musl.sif
+git clone -b release --depth 10 https://github.com/lammps/lammps.git lammps-release
+cmake -S lammps-release/cmake -B build-release -G Ninja -D CMAKE_INSTALL_PREFIX=$PWD/lammps-static -D CMAKE_TOOLCHAIN_FILE=/usr/musl/share/cmake/linux-musl.cmake -C lammps-release/cmake/presets/most.cmake -C lammps-release/cmake/presets/kokkos-openmp.cmake -D DOWNLOAD_POTENTIALS=OFF -D BUILD_MPI=OFF -D BUILD_TESTING=OFF -D CMAKE_BUILD_TYPE=Release -D PKG_ATC=ON -D PKG_AWPMD=ON -D PKG_MANIFOLD=ON -D PKG_MESONT=ON -D PKG_MGPT=ON -D PKG_ML-PACE=ON -D PKG_ML-RANN=ON -D PKG_MOLFILE=ON -D PKG_PTM=ON -D PKG_QTB=ON -D PKG_SMTBQ=ON
+cmake --build build-release --target all
+cmake --build build-release --target install
+/usr/musl/bin/x86_64-linux-musl-strip lammps-static/bin/*
+tar -czvvf ../lammps-linux-x86_64-4Feb2025.tar.gz lammps-static
+exit # fedora 41 container
+cd ..
+```
+
+The resulting tar archive can be uploaded to the GitHub release page with:
+
+``` sh
+gh release upload patch_4Feb2025 lammps-linux-x86_64-4Feb2025.tar.gz
+```
+
+#### Linux x86_64 Flatpak bundle with GUI included
+
+Make sure you have the `flatpak` and `flatpak-builder` packages
+installed locally (they require binaries that run with elevated
+privileges and thus cannot be used from the container) and build a
+LAMMPS and LAMMPS-GUI flatpak bundle in the `release-packages` folder
 with:
 
-```
+``` sh
-gh release upload patch_19Nov2024 ~/Downloads/lammps-linux-x86_64-19Nov2024.tar.gz
+cd release-packages
+flatpak --user remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
+flatpak-builder  --force-clean --verbose --repo=$PWD/flatpak-repo --install-deps-from=flathub --state-dir=$PWD --user --ccache --default-branch=release flatpak-build lammps-release/tools/lammps-gui/org.lammps.lammps-gui.yml
+flatpak build-bundle --runtime-repo=https://flathub.org/repo/flathub.flatpakrepo --verbose $PWD/flatpak-repo ../LAMMPS-Linux-x86_64-GUI-4Feb2025.flatpak org.lammps.lammps-gui release
+cd ..
 ```
 
+The resulting flatpak bundle file can be uploaded to the GitHub release page with:
+
+``` sh
+gh release upload patch_4Feb2025 LAMMPS-Linux-x86_64-GUI-4Feb2025.flatpak
+```
+
+#### LAMMPS Source tarball
+
+The container for the static binary can also be used to prepare the source
+tarball including the HTML and PDF manual (this is currently done automatically
+when the releases is created and the tarball uploaded to https://download.lammps.org/tars/).
+The steps are as follows:
+
+``` sh
+cd release-packages
+apptainer shell fedora41_musl_mingw.sif
+cd lammps-release
+rm -f ../release.tar*
+git archive --output=../release.tar --prefix=lammps-4Feb2025/ HEAD
+cd doc
+make clean-all
+make html pdf
+tar -rf ../../release.tar --transform 's,^,lammps-4Feb2025/doc/,' html Manual.pdf
+gzip -9v ../../release.tar
+mv ../../release.tar.gz ../../lammps-src-4Feb2025.tar.gz
+exit # fedora41 container
+cd ..
+```
+
+The resulting source tarball can be uploaded to the GitHub release page with:
+
+``` sh
+gh release upload patch_4Feb2025 lammps-src-4Feb2025.tar.gz
+```
+
+#### Build Windows Installer Packages with MinGW Linux-to-Windows Cross-compiler
+
+The various Windows installer packages can also be built with
+apptainer container image.
+
+``` sh
+cd release-packages
+apptainer shell fedora41_musl_mingw.sif
+git clone --depth 10 https://github.com/lammps/lammps-packages.git lammps-packages
+cd lammps-packages/mingw-cross
+ln -sf ../../lammps-release lammps
+./buildall.sh release >& mk.log & less +F mk.log
+```
+
+The installer with the GUI included can be uploaded to the GitHub release page with:
+
+``` sh
+ln -sf LAMMPS-64bit-GUI-4Feb2025.exe LAMMPS-Win10-64bit-GUI-4Feb2025.exe
+gh release upload patch_4Feb2025 LAMMPS-Win10-64bit-GUI-4Feb2025.exe
+```
+
+The symbolic link is used to have a consistent naming scheme for the packages
+attached to the GitHub release page.
+
+#### Clean up:
+
+``` sh
+cd ..
+rm -r release-packages
+```
+
+#### Build Multi-arch App-bundle for macOS
+
+Building app-bundles for macOS is not as easily automated and portable
+as some of the other steps.  It requires a machine actually running
+macOS.  In that machine the Xcode compiler package needs to be
+installed. This also includes tools for building and manipulating disk
+images.  This compiler supports building executables for both, the
+x86_64 and the arm64 architectures.  This requires building with CMake
+and using the CMake settings:
+
+``` sh
+-D CMAKE_OSX_ARCHITECTURES=arm64;x86_64
+-D CMAKE_OSX_DEPLOYMENT_TARGET=11.0
+```
+
+This will add the compiler flags `-arch arm64 -arch x86_64
+-mmacosx-version-min=11.0` and thus produce object for both
+architectures and support for macOS versions back to version 11 (aka Big
+Sur).  With these settings the following libraries should be compiled
+and installed (e.g. to `$HOME/.local`) as static libraries only:
+- libomp taken from the LLVM/Clang source distribution (to support OpenMP)
+- jpeg
+- zlib
+- png
+- Qt (for LAMMPS-GUI)
+
+When configuring LAMMPS the `cmake/presets/clang.cmake` should be used
+and as many packages as possible enabled. For LAMMPS-GUI, MPI should be
+disabled with `-D BUILD_MPI=OFF` and LAMMPS-GUI enabled with 
+`-D BUILD_LAMMPS_GUI=ON`.  If the CMake configuration is successful,
+settings for building a macOS app-bundle are enabled and with `cmake
+--build build --target dmg` extra steps will be executed that will build
+a macOS application installer image under the name
+`LAMMPS_GUI-macOS-multiarch-4Feb2025.dmg`
+
+The application image can be uploaded to the GitHub release page with:
+
+``` sh
+ln -sf LAMMPS_GUI-macOS-multiarch-4Feb2025.dmg LAMMPS-macOS-multiarch-GUI-4Feb2025.dmg
+gh release upload patch_4Feb2025 LAMMPS-macOS-multiarch-GUI-4Feb2025.dmg
+```
+
+The symbolic link is used to have a consistent naming scheme for the packages
+attached to the GitHub release page.
+
+We are currently building the application images on macOS 12 (aka Monterey).
+
+#### Build Linux x86_64 binary tarball on Ubuntu 20.04LTS
+
+While the flatpak Linux version uses portable runtime libraries provided
+by the flatpak environment, we also build regular Linux executables that
+use a wrapper script and matching shared libraries in a tarball.  To be
+compatible with many Linux distributions, one has to build this on a
+very old Linux distribution, since most Linux system libraries are
+usually backward compatible but not forward compatible.  This is
+currently done on an Ubuntu 20.04LTS system. Once LAMMPS moves to
+require CMake 3.20 and C++17, we will have to move to Ubuntu 22.04LTS.
+This installation (either on a real or a virtual machine) should have
+the packages installed that are indicated in
+`tools/singularity/ubuntu20.04.def` plus Qt version 5.x with development
+headers, so that LAMMPS-GUI can be compiled.
+
+Also the building of the binary tarball and setup of the bundled
+libraries and wrapper scripts is automated and can executed with `cmake
+--build build --target tgz`.  This should produce a file
+`LAMMPS_GUI-Linux-amd64-4Feb2025.tar.gz` which can be uploaded to the
+GitHub release page with:
+
+``` sh
+ln -sf LAMMPS_GUI-Linux-amd64-4Feb2025.tar.gz LAMMPS-Linux-x86_64-GUI-4Feb2025.tar.gz
+gh release upload patch_4Feb2025 LAMMPS-Linux-x86_64-GUI-4Feb2025.tar.gz
+```
+
+### Update download page on LAMMPS website
+
+Check out the LAMMPS website repo
+https://github.com/lammps/lammps-website.git and edit the file
+`src/download.txt` for the new release.  Test translation with `make
+html` and review `html/download.html` Then add and commit to git and
+push the changes to GitHub.  The Temple Jenkis cluster will
+automatically update https://www.lammps.org/download.html accordingly.
+
+Also notify Steve of the release so he can update `src/bug.txt` on the
+website from the available release notes.
 
 ## LAMMPS Stable Release
 
-A LAMMPS stable release is prepared about once per year in the months July, August, or September.
+A LAMMPS stable release is prepared about once per year in the months
-One (or two, if needed) feature releases before the stable release shall contain only bug fixes
+July, August, or September.  One (or two, if needed) feature releases
-or minor feature updates in optional packages.  Also substantial changes to the core of the code
+before the stable release shall contain only bug fixes or minor feature
-shall be applied rather toward the beginning of a development cycle between two stable releases
+updates in optional packages.  Also substantial changes to the core of
-than toward the end.  The intention is to stablilize significant change to the core and have
+the code shall be applied rather toward the beginning of a development
-outside users and developers try them out during the development cycle; the sooner the changes
+cycle between two stable releases than toward the end.  The intention is
-are included, the better chances for spotting peripheral bugs and issues.
+to stablilize significant change to the core and have outside users and
+developers try them out during the development cycle; the sooner the
+changes are included, the better chances for spotting peripheral bugs
+and issues.
 
 ### Prerequesites
 
-Before making a stable release all remaining backported bugfixes shall be released as a (final)
+Before making a stable release all remaining backported bugfixes shall
-stable update release (see below).
+be released as a (final) stable update release (see below).
 
-A LAMMPS stable release process starts like a feature release (see above), only that this feature
+A LAMMPS stable release process starts like a feature release (see
-release is called a "Stable Release Candidate" and no assets are uploaded to GitHub.
+above), only that this feature release is called a "Stable Release
+Candidate" and no assets are uploaded to GitHub.
 
 ### Synchronize 'maintenance' branch with 'release'
 
-The state of the 'release' branch is then transferred to the 'maintenance' branch (which will
+The state of the 'release' branch is then transferred to the
-have diverged significantly from 'release' due to the selectively backported bug fixes).
+'maintenance' branch (which will have diverged significantly from
+'release' due to the selectively backported bug fixes).
 
 ### Fast-forward merge of 'maintenance' into 'stable' and apply tag
 
-At this point it should be possible to do a fast-forward merge of 'maintenance' to 'stable'
+At this point it should be possible to do a fast-forward merge of
-and then apply the stable\_DMmmYYYY tag.
+'maintenance' to 'stable' and then apply the stable\_DMmmYYYY tag.
 
 ### Push branches and tags
 
-
-
 ## LAMMPS Stable Update Release
+
+After making a stable release, bugfixes from the 'develop' branch
+are selectively backported to the 'maintenance' branch.  This is
+done with "git cherry-pick \<commit hash\>' wherever possible.
+The LAMMPS\_UPDATE define in "src/version.h" is set to "Maintenance".
+
+### Prerequesites
+
+When a sufficient number of bugfixes has accumulated or an urgent
+or important bugfix needs to be distributed a new stable update
+release is made.  To make this publicly visible a pull request
+is submitted that will merge 'maintenance' into 'stable'.  Before
+merging, set LAMMPS\_UPDATE in "src/version.h" to "Update #" with
+"#" indicating the update count (1, 2, and so on).
+Also draft suitable release notes under https://github.com/lammps/lammps/releases
+
+### Fast-forward merge of 'maintenance' into 'stable', apply tag, and publish
+
+Do a fast-forward merge of 'maintenance' to 'stable' and then
+apply the stable\_DMmmYYYY\_update# tag and push branch and tag
+to GitHub. The corresponding pull request will be automatically
+closed.   Example:
+
+```
+git checkout maintenance
+git pull
+git checkout stable
+git pull
+git merge --ff-only maintenance
+git tag -s -m 'Update 2 for Stable LAMMPS version 29 August 2024' stable_29Aug2024_update2
+git push git@github.com:lammps/lammps.git --tags maintenance stable
+```
+
+Associate draft release notes with new tag and publish as "latest release".
+
+On https://ci.lammps.org/ go to "dev", "stable" and manually execute
+the "update\_release" task. This will update https://docs.lammps.org/stable
+and prepare a stable tarball.
+
+### Build and upload binary packages and source tarball to GitHub
+
+The build procedure is the same as for the feature releases, only
+that packages are built from the 'stable' branch.

.github/workflows/check-vla.yml

@@ -77,7 +77,7 @@ jobs:
               -D PKG_MDI=on \
               -D PKG_MANIFOLD=on \
               -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=off \
+              -D PKG_ML-RANN=on \
               -D PKG_MOLFILE=on \
               -D PKG_RHEO=on \
               -D PKG_PTM=on \

README

@@ -23,17 +23,20 @@ more information about the code and its uses.
 The LAMMPS distribution includes the following files and directories:
 
 README                     this file
-LICENSE                    the GNU General Public License (GPL)
+LICENSE                    the GNU General Public License (GPLv2)
-bench                      benchmark problems
+CITATION.cff               Citation information for LAMMPS in CFF format
+bench                      benchmark inputs
 cmake                      CMake build files
 doc                        documentation
-examples                   simple test problems
+examples                   example inputs for many LAMMPS commands
-fortran                    Fortran wrapper for LAMMPS
+fortran                    Fortran 2003 module for LAMMPS
 lib                        additional provided or external libraries
 potentials                 interatomic potential files
-python                     Python wrappers for LAMMPS
+python                     Python module for LAMMPS
 src                        source files
 tools                      pre- and post-processing tools
+unittest                   test programs for use with CTest
+.github                    Git and GitHub related files and tools
 
 Point your browser at any of these files to get started:
 
@@ -42,6 +45,8 @@ https://docs.lammps.org/Intro.html          hi-level introduction
 https://docs.lammps.org/Build.html          how to build LAMMPS
 https://docs.lammps.org/Run_head.html       how to run LAMMPS
 https://docs.lammps.org/Commands_all.html   Table of available commands
+https://docs.lammps.org/Howto.html          Short tutorials and HowTo discussions
+https://docs.lammps.org/Errors.html         How to interpret and debug errors
 https://docs.lammps.org/Library.html        LAMMPS library interfaces
 https://docs.lammps.org/Modify.html         how to modify and extend LAMMPS
 https://docs.lammps.org/Developer.html      LAMMPS developer info

cmake/CMakeLists.txt

@@ -209,7 +209,7 @@ endif()
 ########################################################################
 # User input options                                                   #
 ########################################################################
-# backward compatibility with CMake before 3.12 and older LAMMPS documentation
+# backward compatibility with older LAMMPS documentation
 if (PYTHON_EXECUTABLE)
   set(Python_EXECUTABLE "${PYTHON_EXECUTABLE}")
 endif()
@@ -225,6 +225,12 @@ if(DEFINED ENV{VIRTUAL_ENV} AND NOT Python_EXECUTABLE)
     "   Setting Python interpreter to: ${Python_EXECUTABLE}")
 endif()
 
+find_package(Python COMPONENTS Interpreter QUIET)
+# NOTE: RHEL 8.0 and Ubuntu 18.04LTS ship with Python 3.6, Python 3.8 was EOL in 2024
+if(Python_VERSION VERSION_LESS 3.6)
+  message(FATAL_ERROR "LAMMPS requires Python 3.6 or later")
+endif()
+
 set(LAMMPS_MACHINE "" CACHE STRING "Suffix to append to lmp binary (WON'T enable any features automatically")
 mark_as_advanced(LAMMPS_MACHINE)
 if(LAMMPS_MACHINE)
@@ -425,8 +431,8 @@ else()
   target_link_libraries(lammps PUBLIC mpi_stubs)
 endif()
 
-set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallsmall: all 32-bit, smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
+set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
-set(LAMMPS_SIZES_VALUES smallbig bigbig smallsmall)
+set(LAMMPS_SIZES_VALUES smallbig bigbig)
 set_property(CACHE LAMMPS_SIZES PROPERTY STRINGS ${LAMMPS_SIZES_VALUES})
 validate_option(LAMMPS_SIZES LAMMPS_SIZES_VALUES)
 string(TOUPPER ${LAMMPS_SIZES} LAMMPS_SIZES)
@@ -930,7 +936,7 @@ endif()
 include(Testing)
 include(CodeCoverage)
 include(CodingStandard)
-find_package(ClangFormat 11.0)
+find_package(ClangFormat 11.0 QUIET)
 
 if(ClangFormat_FOUND)
   add_custom_target(format-src

cmake/Modules/CodeCoverage.cmake

@@ -7,76 +7,76 @@
 # For Python coverage the coverage package needs to be installed
 ###############################################################################
 if(ENABLE_COVERAGE)
-    find_program(GCOVR_BINARY gcovr)
+  find_program(GCOVR_BINARY gcovr)
-    find_package_handle_standard_args(GCOVR DEFAULT_MSG GCOVR_BINARY)
+  find_package_handle_standard_args(GCOVR DEFAULT_MSG GCOVR_BINARY)
 
-    find_program(COVERAGE_BINARY coverage)
+  find_program(COVERAGE_BINARY coverage)
-    find_package_handle_standard_args(COVERAGE DEFAULT_MSG COVERAGE_BINARY)
+  find_package_handle_standard_args(COVERAGE DEFAULT_MSG COVERAGE_BINARY)
 
-    if(GCOVR_FOUND)
+  if(GCOVR_FOUND)
-        get_filename_component(ABSOLUTE_LAMMPS_SOURCE_DIR ${LAMMPS_SOURCE_DIR} ABSOLUTE)
+    get_filename_component(ABSOLUTE_LAMMPS_SOURCE_DIR ${LAMMPS_SOURCE_DIR} ABSOLUTE)
 
-        add_custom_target(
+    add_custom_target(
-            gen_coverage_xml
+        gen_coverage_xml
-            COMMAND ${GCOVR_BINARY} -s -x -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o coverage.xml
+        COMMAND ${GCOVR_BINARY} -s -x -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o coverage.xml
-            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-            COMMENT "Generating XML coverage report..."
+        COMMENT "Generating XML coverage report..."
-        )
+    )
 
-        set(COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/coverage_html)
+    set(COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/coverage_html)
 
-        add_custom_target(coverage_html_folder
+    add_custom_target(coverage_html_folder
-            COMMAND ${CMAKE_COMMAND} -E make_directory ${COVERAGE_HTML_DIR})
+        COMMAND ${CMAKE_COMMAND} -E make_directory ${COVERAGE_HTML_DIR})
 
-        add_custom_target(
+    add_custom_target(
-            gen_coverage_html
+        gen_coverage_html
-            COMMAND ${GCOVR_BINARY} -s  --html --html-details -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o ${COVERAGE_HTML_DIR}/index.html
+        COMMAND ${GCOVR_BINARY} -s  --html --html-details -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o ${COVERAGE_HTML_DIR}/index.html
-            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-            COMMENT "Generating HTML coverage report..."
+        COMMENT "Generating HTML coverage report..."
-        )
+    )
-        add_dependencies(gen_coverage_html coverage_html_folder)
+    add_dependencies(gen_coverage_html coverage_html_folder)
 
-        add_custom_target(clean_coverage_html
+    add_custom_target(clean_coverage_html
-            ${CMAKE_COMMAND} -E remove_directory ${COVERAGE_HTML_DIR}
+        ${CMAKE_COMMAND} -E remove_directory ${COVERAGE_HTML_DIR}
-            COMMENT "Deleting HTML coverage report..."
+        COMMENT "Deleting HTML coverage report..."
-        )
+    )
 
-        add_custom_target(reset_coverage
+    add_custom_target(reset_coverage
-            ${CMAKE_COMMAND} -E remove -f */*.gcda */*/*.gcda */*/*/*.gcda
+        ${CMAKE_COMMAND} -E remove -f */*.gcda */*/*.gcda */*/*/*.gcda
-                              */*/*/*/*.gcda */*/*/*/*/*.gcda */*/*/*/*/*/*.gcda
+                          */*/*/*/*.gcda */*/*/*/*/*.gcda */*/*/*/*/*/*.gcda
-                              */*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*.gcda
+                          */*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*.gcda
-                              */*/*/*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*/*/*.gcda
+                          */*/*/*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*/*/*.gcda
-            WORKIND_DIRECTORY ${CMAKE_BINARY_DIR}
+        WORKIND_DIRECTORY ${CMAKE_BINARY_DIR}
-            COMMENT "Deleting coverage data files..."
+        COMMENT "Deleting coverage data files..."
-        )
+    )
-        add_dependencies(reset_coverage clean_coverage_html)
+    add_dependencies(reset_coverage clean_coverage_html)
-    endif()
+  endif()
 
-    if(COVERAGE_FOUND)
+  if(COVERAGE_FOUND)
-        set(PYTHON_COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/python_coverage_html)
+    set(PYTHON_COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/python_coverage_html)
-        configure_file(.coveragerc.in ${CMAKE_BINARY_DIR}/.coveragerc @ONLY)
+    configure_file(.coveragerc.in ${CMAKE_BINARY_DIR}/.coveragerc @ONLY)
 
-        add_custom_command(
+    add_custom_command(
-            OUTPUT ${CMAKE_BINARY_DIR}/unittest/python/.coverage
+        OUTPUT ${CMAKE_BINARY_DIR}/unittest/python/.coverage
-            COMMAND ${COVERAGE_BINARY} combine
+        COMMAND ${COVERAGE_BINARY} combine
-            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-            COMMENT "Combine Python coverage files..."
+        COMMENT "Combine Python coverage files..."
-        )
+    )
 
-        add_custom_target(
+    add_custom_target(
-            gen_python_coverage_html
+        gen_python_coverage_html
-            COMMAND ${COVERAGE_BINARY} html --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -d ${PYTHON_COVERAGE_HTML_DIR}
+        COMMAND ${COVERAGE_BINARY} html --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -d ${PYTHON_COVERAGE_HTML_DIR}
-            DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
+        DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
-            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-            COMMENT "Generating HTML Python coverage report..."
+        COMMENT "Generating HTML Python coverage report..."
-        )
+    )
 
-        add_custom_target(
+    add_custom_target(
-            gen_python_coverage_xml
+        gen_python_coverage_xml
-            COMMAND ${COVERAGE_BINARY} xml --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -o ${CMAKE_BINARY_DIR}/python_coverage.xml
+        COMMAND ${COVERAGE_BINARY} xml --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -o ${CMAKE_BINARY_DIR}/python_coverage.xml
-            DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
+        DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
-            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-            COMMENT "Generating XML Python coverage report..."
+        COMMENT "Generating XML Python coverage report..."
-        )
+    )
-    endif()
+  endif()
 endif()

cmake/Modules/CodingStandard.cmake

@@ -1,40 +1,39 @@
-# use default (or custom) Python executable, if version is sufficient
+# use default (or custom) Python executable.
-if(Python_VERSION VERSION_GREATER_EQUAL 3.6)
+# Python version check is in main CMakeLists.txt file
+if(Python_EXECUTABLE)
   set(Python3_EXECUTABLE ${Python_EXECUTABLE})
 endif()
 find_package(Python3 COMPONENTS Interpreter)
 
 if(Python3_EXECUTABLE)
-    if(Python3_VERSION VERSION_GREATER_EQUAL 3.6)
+  add_custom_target(
-        add_custom_target(
+    check-whitespace
-          check-whitespace
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Check for whitespace errors")
-          COMMENT "Check for whitespace errors")
+  add_custom_target(
-        add_custom_target(
+    check-homepage
-          check-homepage
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Check for homepage URL errors")
-          COMMENT "Check for homepage URL errors")
+  add_custom_target(
-        add_custom_target(
+    check-permissions
-          check-permissions
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Check for permission errors")
-          COMMENT "Check for permission errors")
+  add_custom_target(
-        add_custom_target(
+    fix-whitespace
-          fix-whitespace
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py -f .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py -f .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Fix whitespace errors")
-          COMMENT "Fix whitespace errors")
+  add_custom_target(
-        add_custom_target(
+    fix-homepage
-          fix-homepage
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py -f .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py -f .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Fix homepage URL errors")
-          COMMENT "Fix homepage URL errors")
+  add_custom_target(
-        add_custom_target(
+    fix-permissions
-          fix-permissions
+    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py -f .
-          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py -f .
+    WORKING_DIRECTORY  ${LAMMPS_DIR}
-          WORKING_DIRECTORY  ${LAMMPS_DIR}
+    COMMENT "Fix permission errors")
-          COMMENT "Fix permission errors")
-    endif()
 endif()

cmake/Modules/Documentation.cmake

@@ -13,7 +13,7 @@ if(BUILD_DOC)
   endif()
   find_package(Python3 REQUIRED COMPONENTS Interpreter)
   if(Python3_VERSION VERSION_LESS 3.8)
-    message(FATAL_ERROR "Python 3.8 and up is required to build the HTML documentation")
+    message(FATAL_ERROR "Python 3.8 and up is required to build the LAMMPS HTML documentation")
   endif()
   set(VIRTUALENV ${Python3_EXECUTABLE} -m venv)
 
@@ -65,8 +65,8 @@ if(BUILD_DOC)
     find_package(Sphinx)
   endif()
 
-  set(MATHJAX_URL "https://github.com/mathjax/MathJax/archive/3.1.3.tar.gz" CACHE STRING "URL for MathJax tarball")
+  set(MATHJAX_URL "https://github.com/mathjax/MathJax/archive/3.2.2.tar.gz" CACHE STRING "URL for MathJax tarball")
-  set(MATHJAX_MD5 "b81661c6e6ba06278e6ae37b30b0c492" CACHE STRING "MD5 checksum of MathJax tarball")
+  set(MATHJAX_MD5 "08dd6ef33ca08870220d9aade2a62845" CACHE STRING "MD5 checksum of MathJax tarball")
   mark_as_advanced(MATHJAX_URL)
   GetFallbackURL(MATHJAX_URL MATHJAX_FALLBACK)
 

cmake/Modules/LAMMPSInterfacePlugin.cmake

@@ -34,8 +34,26 @@ if(MSVC)
   add_compile_definitions(_CRT_SECURE_NO_WARNINGS)
 endif()
 
-# C++11 is required
+if(NOT CMAKE_CXX_STANDARD)
-set(CMAKE_CXX_STANDARD 11)
+  if(cxx_std_17 IN_LIST CMAKE_CXX_COMPILE_FEATURES)
+    set(CMAKE_CXX_STANDARD 17)
+  else()
+    set(CMAKE_CXX_STANDARD 11)
+  endif()
+endif()
+if(CMAKE_CXX_STANDARD LESS 11)
+  message(FATAL_ERROR "C++ standard must be set to at least 11")
+endif()
+if(CMAKE_CXX_STANDARD LESS 17)
+  message(WARNING "Selecting C++17 standard is preferred over C++${CMAKE_CXX_STANDARD}")
+endif()
+if(PKG_KOKKOS AND (CMAKE_CXX_STANDARD LESS 17))
+  set(CMAKE_CXX_STANDARD 17)
+endif()
+# turn off C++17 check in lmptype.h
+if(LAMMPS_CXX11)
+  add_compile_definitions(LAMMPS_CXX11)
+endif()
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
 # Need -restrict with Intel compilers
@@ -242,8 +260,8 @@ endif()
 
 ################
 # integer size selection
-set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallsmall: all 32-bit, smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
+set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
-set(LAMMPS_SIZES_VALUES smallbig bigbig smallsmall)
+set(LAMMPS_SIZES_VALUES smallbig bigbig)
 set_property(CACHE LAMMPS_SIZES PROPERTY STRINGS ${LAMMPS_SIZES_VALUES})
 validate_option(LAMMPS_SIZES LAMMPS_SIZES_VALUES)
 string(TOUPPER ${LAMMPS_SIZES} LAMMPS_SIZES)

cmake/Modules/Packages/ML-IAP.cmake

@@ -24,9 +24,7 @@ if(MLIAP_ENABLE_PYTHON)
   if(NOT PKG_PYTHON)
     message(FATAL_ERROR "Must enable PYTHON package for including Python support in ML-IAP")
   endif()
-  if(Python_VERSION VERSION_LESS 3.6)
+  # Python version check is in main CMakeLists.txt file
-    message(FATAL_ERROR "Python support in ML-IAP requires Python 3.6 or later")
-  endif()
 
   set(MLIAP_BINARY_DIR ${CMAKE_BINARY_DIR}/cython)
   file(GLOB MLIAP_CYTHON_SRC CONFIGURE_DEPENDS ${LAMMPS_SOURCE_DIR}/ML-IAP/*.pyx)

cmake/Modules/Packages/ML-QUIP.cmake

@@ -37,7 +37,7 @@ if(DOWNLOAD_QUIP)
   endforeach()
   # Fix cmake crashing when MATH_LINKOPTS not set, required for e.g. recent Cray Programming Environment
   set(temp "${temp} -L/_DUMMY_PATH_\n")
-  set(temp "${temp}PYTHON=python\nPIP=pip\nEXTRA_LINKOPTS=\n")
+  set(temp "${temp}PYTHON=${Python_EXECUTABLE}\nPIP=pip\nEXTRA_LINKOPTS=\n")
   set(temp "${temp}HAVE_CP2K=0\nHAVE_VASP=0\nHAVE_TB=0\nHAVE_PRECON=1\nHAVE_LOTF=0\nHAVE_ONIOM=0\n")
   set(temp "${temp}HAVE_LOCAL_E_MIX=0\nHAVE_QC=0\nHAVE_GAP=1\nHAVE_DESCRIPTORS_NONCOMMERCIAL=1\n")
   set(temp "${temp}HAVE_TURBOGAP=0\nHAVE_QR=1\nHAVE_THIRDPARTY=0\nHAVE_FX=0\nHAVE_SCME=0\nHAVE_MTP=0\n")

cmake/Modules/Packages/PLUMED.cmake

@@ -40,6 +40,13 @@ mark_as_advanced(PLUMED_URL)
 mark_as_advanced(PLUMED_MD5)
 GetFallbackURL(PLUMED_URL PLUMED_FALLBACK)
 
+# adjust C++ standard support for self-compiled Plumed2
+if(CMAKE_CXX_STANDARD GREATER 11)
+  set(PLUMED_CXX_STANDARD 14)
+else()
+  set(PLUMED_CXX_STANDARD 11)
+endif()
+
 if((CMAKE_SYSTEM_NAME STREQUAL "Windows") AND (CMAKE_CROSSCOMPILING))
   if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
     set(CROSS_CONFIGURE mingw64-configure)
@@ -55,7 +62,7 @@ if((CMAKE_SYSTEM_NAME STREQUAL "Windows") AND (CMAKE_CROSSCOMPILING))
     URL_MD5 ${PLUMED_MD5}
     BUILD_IN_SOURCE 1
     CONFIGURE_COMMAND ${CROSS_CONFIGURE} --disable-shared --disable-bsymbolic
-                                         --disable-python --enable-cxx=11
+                                         --disable-python --enable-cxx=${PLUMED_CXX_STANDARD}
                                          --enable-modules=-adjmat:+crystallization:-dimred:+drr:+eds:-fisst:+funnel:+logmfd:+manyrestraints:+maze:+opes:+multicolvar:-pamm:-piv:+s2cm:-sasa:-ves
                                          ${PLUMED_CONFIG_OMP}
                                          ${PLUMED_CONFIG_MPI}
@@ -142,7 +149,7 @@ else()
       CONFIGURE_COMMAND <SOURCE_DIR>/configure --prefix=<INSTALL_DIR>
                                              ${CONFIGURE_REQUEST_PIC}
                                              --enable-modules=all
-                                             --enable-cxx=11
+                                             --enable-cxx=${PLUMED_CXX_STANDARD}
                                              --disable-python
                                              ${PLUMED_CONFIG_MPI}
                                              ${PLUMED_CONFIG_OMP}

cmake/Modules/Packages/PYTHON.cmake

@@ -1,6 +1,6 @@
 
 if(NOT Python_INTERPRETER)
-  # backward compatibility with CMake before 3.12 and older LAMMPS documentation
+  # backward compatibility with older LAMMPS documentation
   if(PYTHON_EXECUTABLE)
     set(Python_EXECUTABLE ${PYTHON_EXECUTABLE})
   endif()

cmake/presets/kokkos-cuda.cmake

@@ -1,6 +1,5 @@
 # preset that enables KOKKOS and selects CUDA compilation with OpenMP
-# enabled as well. This preselects CC 5.0 as default GPU arch, since
+# enabled as well. The GPU architecture *must* match your hardware
-# that is compatible with all higher CC, but not the default CC 3.5
 set(PKG_KOKKOS ON CACHE BOOL "" FORCE)
 set(Kokkos_ENABLE_SERIAL ON CACHE BOOL "" FORCE)
 set(Kokkos_ENABLE_CUDA   ON CACHE BOOL "" FORCE)

doc/Makefile

@@ -17,9 +17,11 @@ MATHJAXTAG     = 3.2.2
 
 PYTHON         = $(word 3,$(shell type python3))
 DOXYGEN        = $(word 3,$(shell type doxygen))
+PANDOC         = $(word 3,$(shell type pandoc))
 HAS_PYTHON3    = NO
 HAS_DOXYGEN    = NO
 HAS_PDFLATEX   = NO
+HAS_PANDOC     = NO
 
 ifeq ($(shell type python3 >/dev/null 2>&1; echo $$?), 0)
 HAS_PYTHON3    = YES
@@ -31,10 +33,14 @@ endif
 
 ifeq ($(shell type pdflatex >/dev/null 2>&1; echo $$?), 0)
 ifeq ($(shell type latexmk >/dev/null 2>&1; echo $$?), 0)
-HAS_PDFLATEX = YES
+HAS_PDFLATEX   = YES
 endif
 endif
 
+ifeq ($(shell type pandoc >/dev/null 2>&1; echo $$?), 0)
+HAS_PANDOC     = YES
+endif
+
 # override settings for PIP commands
 # PIP_OPTIONS = --cert /etc/pki/ca-trust/extracted/openssl/ca-bundle.trust.crt --proxy http://proxy.mydomain.org
 
@@ -45,8 +51,9 @@ SPHINXEXTRA = -j $(shell $(PYTHON) -c 'import multiprocessing;print(multiprocess
 # we only want to use explicitly listed files.
 DOXYFILES      = $(shell sed -n -e 's/\#.*$$//' -e '/^ *INPUT \+=/,/^[A-Z_]\+ \+=/p' doxygen/Doxyfile.in | sed -e 's/@LAMMPS_SOURCE_DIR@/..\/src/g' -e 's/\\//g' -e 's/ \+/ /' -e 's/[A-Z_]\+ \+= *\(YES\|NO\|\)//') 
 
-.PHONY: help clean-all clean clean-spelling epub mobi html pdf spelling anchor_check style_check char_check role_check xmlgen fasthtml
+.PHONY: help clean-all clean clean-spelling epub mobi html pdf spelling anchor_check style_check char_check role_check xmlgen fasthtml fasthtml-init 
 
+FASTHTMLFILES = $(patsubst $(RSTDIR)/%.rst,fasthtml/%.html,$(wildcard $(RSTDIR)/*rst))
 # ------------------------------------------
 
 help:
@@ -116,25 +123,23 @@ html: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJ
 	@rm -rf html/PDF/.[sg]*
 	@echo "Build finished. The HTML pages are in doc/html."
 
-fasthtml: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJAX)
+fasthtml: fasthtml-init $(FASTHTMLFILES)
-	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
-	@$(MAKE) $(MFLAGS) -C graphviz all
-	@mkdir -p fasthtml
-	@(\
-		. $(VENV)/bin/activate ; env PYTHONWARNINGS= PYTHONDONTWRITEBYTECODE=1 \
-		sphinx-build $(SPHINXEXTRA) -b html -c $(SPHINXCONFIG) -d $(BUILDDIR)/fasthtml/doctrees $(RSTDIR) fasthtml ;\
-		touch $(RSTDIR)/Fortran.rst ; env PYTHONWARNINGS= PYTHONDONTWRITEBYTECODE=1 \
-		sphinx-build $(SPHINXEXTRA) -b html -c $(SPHINXCONFIG) -d $(BUILDDIR)/fasthtml/doctrees $(RSTDIR) fasthtml ;\
-		deactivate ;\
-	)
-	@rm -rf fasthtml/_sources
-	@rm -rf fasthtml/PDF
-	@rm -rf fasthtml/USER
-	@rm -rf fasthtml/JPG
-	@cp -r src/PDF fasthtml/PDF
-	@rm -rf fasthtml/PDF/.[sg]*
 	@echo "Fast HTML build finished. The HTML pages are in doc/fasthtml."
 
+fasthtml-init:
+	@mkdir -p fasthtml/JPG
+	@cp src/JPG/*.* fasthtml/JPG
+	@cp $(RSTDIR)/accel_styles.rst $(RSTDIR)/lepton_expression.rst fasthtml/
+	@cp $(BUILDDIR)/utils/pandoc.css fasthtml/
+
+fasthtml/%.html: $(RSTDIR)/%.rst
+	@if [ "$(HAS_PANDOC)" == "NO" ] ; then echo "Make 'fasthtml' requires the 'pandoc' software" 1>&2; exit 1; fi
+	@mkdir -p fasthtml
+	@echo converting $< to $@
+	@sed -e 's/\\AA/\\mathring{\\mathrm{A}}/g' $< > fasthtml/$*.temp.rst
+	@pandoc -s --mathml --css="pandoc.css" --template=$(BUILDDIR)/utils/pandoc.html --metadata title="$@" -o $@ fasthtml/$*.temp.rst
+	@rm -f fasthtml/$*.temp.rst
+
 spelling: xmlgen globbed-tocs $(SPHINXCONFIG)/conf.py $(VENV) $(SPHINXCONFIG)/false_positives.txt
 	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
 	@(\

doc/README

@@ -22,12 +22,12 @@ doxygen-warn.log  logfile with warnings from running doxygen
 and:
 
 github-development-workflow.md   notes on the LAMMPS development workflow
-include-file-conventions.md      notes on LAMMPS' include file conventions
 documentation_conventions.md     notes on writing documentation for LAMMPS
 
 If you downloaded a LAMMPS tarball from www.lammps.org, then the html
 folder and the PDF manual should be included. If you downloaded LAMMPS
-from GitHub then you either need to build them.
+using GitHub then you either need to build them yourself or read the
+online version at https://docs.lammps.org/
 
 You can build the HTML and PDF files yourself, by typing "make html"
 or by "make pdf", respectively.  This requires various tools and files.
@@ -39,10 +39,10 @@ environment and local folders.
 
 Installing prerequisites for the documentation build
 
-To run the HTML documention build toolchain, python 3.x, doxygen, git,
+To run the HTML documention build toolchain, python 3.8 or later,
-and the venv python module have to be installed if not already available.
+doxygen 1.8.10 or later, git, and the venv python module have to be
-Also internet access is initially required to download external files
+installed if not already available.  Also internet access is initially
-and tools.
+required to download external files and tools.
 
 Building the PDF format manual requires in addition a compatible LaTeX
 installation with support for PDFLaTeX and several add-on LaTeX packages
@@ -52,16 +52,24 @@ installed.  This includes:
 - babel
 - capt-of
 - cmap
+- dvipng
+- ellipse
 - fncychap
+- fontawesom
 - framed
 - geometry
+- gyre
 - hyperref
 - hypcap
 - needspace
+- pict2e
 - times
 - tabulary
+- titlesec
 - upquote
 - wrapfig
+- xindy
+
 Also the latexmk script is required to run PDFLaTeX and related tools.
 the required number of times to have self-consistent output and include
 updated bibliography and indices.

doc/lammps.1

@@ -1,7 +1,7 @@
-.TH LAMMPS "1" "19 November 2024" "2024-11-19"
+.TH LAMMPS "1" "4 February 2025" "2025-02-04"
 .SH NAME
 .B LAMMPS
-\- Molecular Dynamics Simulator.  Version 19 November 2024
+\- Molecular Dynamics Simulator.  Version 4 February 2025
 
 .SH SYNOPSIS
 .B lmp
@@ -311,7 +311,7 @@ the chapter on errors in the
 manual gives some additional information about error messages, if possible.
 
 .SH COPYRIGHT
-© 2003--2024 Sandia Corporation
+© 2003--2025 Sandia Corporation
 
 This package is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License version 2 as

doc/src/Build.rst

@@ -14,6 +14,29 @@ As an alternative, you can download a package with pre-built executables
 or automated build trees, as described in the :doc:`Install <Install>`
 section of the manual.
 
+Prerequisites
+-------------
+
+Which software you need to compile and use LAMMPS strongly depends on
+which :doc:`features and settings <Build_settings>` and which
+:doc:`optional packages <Packages_list>` you are trying to include.
+Common to all is that you need a C++ and C compiler, where the C++
+compiler has to support at least the C++11 standard (note that some
+compilers require command-line flag to activate C++11 support).
+Furthermore, if you are building with CMake, you need at least CMake
+version 3.20 and a compatible build tool (make or ninja-build); if you
+are building the the legacy GNU make based build system you need GNU
+make (other make variants are not going to work since the build system
+uses features unique to GNU make) and a Unix-like build environment with
+a Bourne shell, and shell tools like "sed", "grep", "touch", "test",
+"tr", "cp", "mv", "rm", "ln", "diff" and so on. Parts of LAMMPS
+interface with or use Python version 3.6 or later.
+
+The LAMMPS developers aim to keep LAMMPS very portable and usable -
+at least in parts - on most operating systems commonly used for
+running MD simulations.  Please see the :doc:`section on portablility
+<Intro_portability>` for more details.
+
 .. toctree::
    :maxdepth: 1
 

doc/src/Build_cmake.rst

@@ -52,9 +52,9 @@ software or for people that want to modify or extend LAMMPS.
   compilers can be configured and built concurrently from the same
   source tree.
 - Simplified packaging of LAMMPS for Linux distributions, environment
-  modules, or automated build tools like `Homebrew <https://brew.sh/>`_.
+  modules, or automated build tools like `Spack <https://spack.io>`_
-- Integration of automated unit and regression testing (the LAMMPS side
+  or `Homebrew <https://brew.sh/>`_.
-  of this is still under active development).
+- Integration of automated unit and regression testing.
 
 .. _cmake_build:
 
@@ -119,6 +119,13 @@ configured) and additional files like LAMMPS API headers, manpages,
 potential and force field files.  The location of the installation tree
 defaults to ``${HOME}/.local``.
 
+.. note::
+
+   If you have set `-D CMAKE_INSTALL_PREFIX` to install LAMMPS into a
+   system location on a Linux machine , you may also have to run (as
+   root) the `ldconfig` program to update the cache file for fast lookup
+   of system shared libraries.
+
 .. _cmake_options:
 
 Configuration and build options

doc/src/Build_extras.rst

@@ -255,11 +255,10 @@ Traditional make
 
 Before building LAMMPS, you must build the GPU library in ``lib/gpu``\ .
 You can do this manually if you prefer; follow the instructions in
-``lib/gpu/README``.  Note that the GPU library uses MPI calls, so you must
+``lib/gpu/README``.  Note that the GPU library uses MPI calls, so you
-use the same MPI library (or the STUBS library) settings as the main
+must use the same MPI library (or the STUBS library) settings as the
-LAMMPS code.  This also applies to the ``-DLAMMPS_BIGBIG``\ ,
+main LAMMPS code.  This also applies to the ``-DLAMMPS_BIGBIG`` or
-``-DLAMMPS_SMALLBIG``\ , or ``-DLAMMPS_SMALLSMALL`` settings in whichever
+``-DLAMMPS_SMALLBIG`` settings in whichever Makefile you use.
-Makefile you use.
 
 You can also build the library in one step from the ``lammps/src`` dir,
 using a command like these, which simply invokes the ``lib/gpu/Install.py``
@@ -1139,11 +1138,10 @@ POEMS package
 PYTHON package
 ---------------------------
 
-Building with the PYTHON package requires you have a the Python development
+Building with the PYTHON package requires you have a the Python
-headers and library available on your system, which needs to be a Python 2.7
+development headers and library available on your system, which
-version or a Python 3.x version.  Since support for Python 2.x has ended,
+needs to be Python version 3.6 or later.  See ``lib/python/README``
-using Python 3.x is strongly recommended. See ``lib/python/README`` for
+for additional details.
-additional details.
 
 .. tabs::
 
@@ -1159,7 +1157,7 @@ additional details.
       set the Python_EXECUTABLE variable to specify which Python
       interpreter should be used.  Note note that you will also need to
       have the development headers installed for this version,
-      e.g. python2-devel.
+      e.g. python3-devel.
 
    .. tab:: Traditional make
 

doc/src/Build_make.rst

@@ -30,9 +30,9 @@ additional tools to be available and functioning.
   * A Bourne shell compatible "Unix" shell program (frequently this is ``bash``)
   * A few shell utilities: ``ls``, ``mv``, ``ln``, ``rm``, ``grep``, ``sed``, ``tr``, ``cat``, ``touch``, ``diff``, ``dirname``
   * Python (optional, required for ``make lib-<pkg>`` in the ``src``
-    folder).  Python scripts are currently tested with python 2.7 and
+    folder).  Python scripts are currently tested with 3.6 to 3.11.
-    3.6 to 3.11. The procedure for :doc:`building the documentation
+    The procedure for :doc:`building the documentation <Build_manual>`
-    <Build_manual>` *requires* Python 3.5 or later.
+    *requires* Python 3.8 or later.
 
 Getting started
 ^^^^^^^^^^^^^^^

doc/src/Build_manual.rst

@@ -78,8 +78,7 @@ folder.  The following ``make`` commands are available:
    make epub          # generate LAMMPS.epub in ePUB format using Sphinx
    make mobi          # generate LAMMPS.mobi in MOBI format using ebook-convert
 
-   make fasthtml      # generate approximate HTML in fasthtml dir using Sphinx
+   make fasthtml      # generate approximate HTML in fasthtml dir using pandoc
-                      # some Sphinx extensions do not work correctly with this
 
    make clean         # remove intermediate RST files created by HTML build
    make clean-all     # remove entire build folder and any cached data
@@ -116,9 +115,9 @@ environment variable.
 Prerequisites for HTML
 ----------------------
 
-To run the HTML documentation build toolchain, python 3, git, doxygen,
+To run the HTML documentation build toolchain, Python 3.8 or later, git,
-and virtualenv have to be installed locally.  Here are instructions for
+doxygen, and virtualenv have to be installed locally.  Here are
-common setups:
+instructions for common setups:
 
 .. tabs::
 
@@ -128,13 +127,7 @@ common setups:
 
          sudo apt-get install git doxygen
 
-   .. tab:: RHEL or CentOS (Version 7.x)
+   .. tab:: Fedora or RHEL/AlmaLinux/RockyLinux (8.x or later)
-
-      .. code-block:: bash
-
-         sudo yum install git doxygen
-
-   .. tab:: Fedora or RHEL/CentOS (8.x or later)
 
       .. code-block:: bash
 
@@ -154,7 +147,36 @@ Prerequisites for PDF
 
 In addition to the tools needed for building the HTML format manual,
 a working LaTeX installation with support for PDFLaTeX and a selection
-of LaTeX styles/packages are required.  To run the PDFLaTeX translation
+of LaTeX styles/packages are required.  Apart from LaTeX packages that
+are usually installed by default, the following packages are required:
+
+.. table_from_list::
+   :columns: 11
+
+   - amsmath
+   - anysize
+   - babel
+   - capt-of
+   - cmap
+   - dvipng
+   - ellipse
+   - fncychap
+   - fontawesome
+   - framed
+   - geometry
+   - gyre
+   - hyperref
+   - hypcap
+   - needspace
+   - pict2e
+   - times
+   - tabulary
+   - titlesec
+   - upquote
+   - wrapfig
+   - xindy
+
+To run the PDFLaTeX translation
 the ``latexmk`` script needs to be installed as well.
 
 Prerequisites for ePUB and MOBI
@@ -182,12 +204,42 @@ documentation is required and either existing files in the ``src``
 folder need to be updated or new files added. These files are written in
 `reStructuredText <rst_>`_ markup for translation with the Sphinx tool.
 
+Testing your contribution
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Before contributing any documentation, please check that both the HTML
-and the PDF format documentation can translate without errors.  During
+and the PDF format documentation can translate without errors and that
-testing the html translation, you may use the ``make fasthtml`` command
+there are no spelling issues.  This is done with ``make html``, ``make pdf``,
-which does an approximate translation (i.e. not all Sphinx features and
+and ``make spelling``, respectively.
-extensions will work), but runs very fast because it will only translate
+
-files that have been changed since the last ``make fasthtml`` command.
+Fast and approximate translation to HTML
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Translating the full manual to HTML or PDF can take a long time.  Thus
+there is a fast and approximate way to translate the reStructuredText to
+HTML as a quick-n-dirty way of checking your manual page.
+
+This translation uses `Pandoc <https://pandoc.org>`_ instead of Sphinx
+and thus all special Sphinx features (cross-references, advanced tables,
+embedding of Python docstrings or doxygen documentation, and so on) will
+not render correctly.  Most embedded math should render correctly.  This
+is a **very fast** way to check the syntax and layout of a documentation
+file translated to HTML while writing or updating it.
+
+To translate **all** manual pages, you can type ``make fasthtml`` at the
+command line.  The translated HTML files are then in the ``fasthtml``
+folder. All subsequent ``make fasthtml`` commands will only translate
+``.rst`` files that have been changed.  The ``make fasthtml`` command
+can be parallelized with make using the `-j` flag.  You can also
+directly translate only individual pages: e.g. to translate only the
+``doc/src/pair_lj.rst`` page type ``make fasthtml/pair_lj.html``
+
+After writing the documentation is completed, you will still need
+to verify with ``make html`` and ``make pdf`` that it translates
+correctly in both formats.
+
+Tests for consistency, completeness, and other known issues
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Please also check the output to the console for any warnings or problems.  There will
 be multiple tests run automatically:

doc/src/Build_settings.rst

@@ -8,12 +8,13 @@ Optional build settings
 LAMMPS can be built with several optional settings.  Each subsection
 explains how to do this for building both with CMake and make.
 
-* `C++11 standard compliance`_ when building all of LAMMPS
+* `C++11 and C++17 standard compliance`_ when building all of LAMMPS
 * `FFT library`_ for use with the :doc:`kspace_style pppm <kspace_style>` command
 * `Size of LAMMPS integer types and size limits`_
 * `Read or write compressed files`_
 * `Output of JPEG, PNG, and movie files`_ via the :doc:`dump image <dump_image>` or :doc:`dump movie <dump_image>` commands
-* `Support for downloading files`_
+* `Support for downloading files from the input`_
+* `Prevent download of large potential files`_
 * `Memory allocation alignment`_
 * `Workaround for long long integers`_
 * `Exception handling when using LAMMPS as a library`_ to capture errors
@@ -23,14 +24,15 @@ explains how to do this for building both with CMake and make.
 
 .. _cxx11:
 
-C++11 standard compliance
+C++11 and C++17 standard compliance
--------------------------
+-----------------------------------
 
-A C++11 standard compatible compiler is a requirement for compiling LAMMPS.
+A C++11 standard compatible compiler is currently the minimum
-LAMMPS version 3 March 2020 is the last version compatible with the previous
+requirement for compiling LAMMPS.  LAMMPS version 3 March 2020 is the
-C++98 standard for the core code and most packages. Most currently used
+last version compatible with the previous C++98 standard for the core
-C++ compilers are compatible with C++11, but some older ones may need extra
+code and most packages. Most currently used C++ compilers are compatible
-flags to enable C++11 compliance.  Example for GNU c++ 4.8.x:
+with C++11, but some older ones may need extra flags to enable C++11
+compliance.  Example for GNU c++ 4.8.x:
 
 .. code-block:: make
 
@@ -40,6 +42,17 @@ Individual packages may require compliance with a later C++ standard
 like C++14 or C++17.  These requirements will be documented with the
 :doc:`individual packages <Packages_details>`.
 
+.. versionchanged:: 4Feb2025
+
+Starting with LAMMPS version 4 February 2025 we are starting a
+transition to require the C++17 standard.  Most current compilers are
+compatible and if the C++17 standard is available by default, LAMMPS
+will enable C++17 and will compile normally.  If the chosen compiler is
+not compatible with C++17, but only supports C++11, then the define
+-DLAMMPS_CXX11 is required to fall back to compiling with a C++11
+compiler.  After the next stable release of LAMMPS in summer 2025, the
+LAMMPS development branch and future releases will require C++17.
+
 ----------
 
 .. _fft:
@@ -303,7 +316,7 @@ large counters can become before "rolling over".  The default setting of
 
       .. code-block:: bash
 
-         -D LAMMPS_SIZES=value   # smallbig (default) or bigbig or smallsmall
+         -D LAMMPS_SIZES=value   # smallbig (default) or bigbig
 
       If the variable is not set explicitly, "smallbig" is used.
 
@@ -314,7 +327,7 @@ large counters can become before "rolling over".  The default setting of
 
       .. code-block:: make
 
-         LMP_INC = -DLAMMPS_SMALLBIG    # or -DLAMMPS_BIGBIG or -DLAMMPS_SMALLSMALL
+         LMP_INC = -DLAMMPS_SMALLBIG    # or -DLAMMPS_BIGBIG
 
       The default setting is ``-DLAMMPS_SMALLBIG`` if nothing is specified
 
@@ -323,34 +336,27 @@ LAMMPS system size restrictions
 
 .. list-table::
    :header-rows: 1
-   :widths: 18 27 28 27
+   :widths: 27 36 37
    :align: center
 
    * -
      - smallbig
      - bigbig
-     - smallsmall
    * - Total atom count
      - :math:`2^{63}` atoms (= :math:`9.223 \cdot 10^{18}`)
      - :math:`2^{63}` atoms (= :math:`9.223 \cdot 10^{18}`)
-     - :math:`2^{31}` atoms (= :math:`2.147 \cdot 10^9`)
    * - Total timesteps
      - :math:`2^{63}` steps (= :math:`9.223 \cdot 10^{18}`)
      - :math:`2^{63}` steps (= :math:`9.223 \cdot 10^{18}`)
-     - :math:`2^{31}` steps (= :math:`2.147 \cdot 10^9`)
    * - Atom ID values
      - :math:`1 \le i \le 2^{31} (= 2.147 \cdot 10^9)`
      - :math:`1 \le i \le 2^{63} (= 9.223 \cdot 10^{18})`
-     - :math:`1 \le i \le 2^{31} (= 2.147 \cdot 10^9)`
    * - Image flag values
      - :math:`-512 \le i \le 511`
      - :math:`- 1\,048\,576 \le i \le 1\,048\,575`
-     - :math:`-512 \le i \le 511`
 
 The "bigbig" setting increases the size of image flags and atom IDs over
-"smallbig" and the "smallsmall" setting is only needed if your machine
+the default "smallbig" setting.
-does not support 64-bit integers or incurs performance penalties when
-using them.
 
 These are limits for the core of the LAMMPS code, specific features or
 some styles may impose additional limits.  The :ref:`ATC
@@ -504,8 +510,8 @@ during a run.
 
 .. _libcurl:
 
-Support for downloading files
+Support for downloading files from the input
------------------------------
+--------------------------------------------
 
 .. versionadded:: 29Aug2024
 
@@ -548,6 +554,25 @@ LAMMPS is compiled accordingly which needs the following settings:
 
 ----------
 
+.. _download_pot:
+
+Prevent download of large potential files
+-----------------------------------------
+
+.. versionadded:: 8Feb2023
+
+LAMMPS bundles a selection of potential files in the ``potentials``
+folder as examples of how those kinds of potential files look like and
+for use with the provided input examples in the ``examples`` tree.  To
+keep the size of the distributed LAMMPS source package small, very large
+potential files (> 5 MBytes) are not bundled, but only downloaded on
+demand when the :doc:`corresponding package <Packages_list>` is
+installed.  This automatic download can be prevented when :doc:`building
+LAMMPS with CMake <Build_cmake>` by adding the setting `-D
+DOWNLOAD_POTENTIALS=off` when configuring.
+
+----------
+
 .. _align:
 
 Memory allocation alignment

doc/src/Commands_all.rst

@@ -140,6 +140,7 @@ additional letter in parenthesis: k = KOKKOS.
    * :doc:`plugin <plugin>`
    * :doc:`prd <prd>`
    * :doc:`python <python>`
+   * :doc:`region2vmd <region2vmd>`
    * :doc:`tad <tad>`
    * :doc:`temper <temper>`
    * :doc:`temper/grem <temper_grem>`

doc/src/Commands_bond.rst

@@ -23,6 +23,7 @@ OPT.
    *
    * :doc:`bpm/rotational <bond_bpm_rotational>`
    * :doc:`bpm/spring <bond_bpm_spring>`
+   * :doc:`bpm/spring/plastic <bond_bpm_spring_plastic>`
    * :doc:`class2 (ko) <bond_class2>`
    * :doc:`fene (iko) <bond_fene>`
    * :doc:`fene/expand (o) <bond_fene_expand>`

doc/src/Commands_compute.rst

@@ -178,6 +178,7 @@ KOKKOS, o = OPENMP, t = OPT.
    * :doc:`ti <compute_ti>`
    * :doc:`torque/chunk <compute_torque_chunk>`
    * :doc:`vacf <compute_vacf>`
+   * :doc:`vacf/chunk <compute_vacf_chunk>`
    * :doc:`vcm/chunk <compute_vcm_chunk>`
    * :doc:`viscosity/cos <compute_viscosity_cos>`
    * :doc:`voronoi/atom <compute_voronoi_atom>`

doc/src/Commands_fix.rst

@@ -162,6 +162,8 @@ OPT.
    * :doc:`phonon <fix_phonon>`
    * :doc:`pimd/langevin <fix_pimd>`
    * :doc:`pimd/nvt <fix_pimd>`
+   * :doc:`pimd/langevin/bosonic <fix_pimd>`
+   * :doc:`pimd/nvt/bosonic <fix_pimd>`
    * :doc:`planeforce <fix_planeforce>`
    * :doc:`plumed <fix_plumed>`
    * :doc:`poems <fix_poems>`

doc/src/Commands_removed.rst

@@ -87,7 +87,7 @@ Minimize style fire/old
 .. deprecated:: 8Feb2023
 
 Minimize style *fire/old* has been removed. Its functionality can be
-reproduced with *fire* with specific options. Please see the
+reproduced with style *fire* with specific options. Please see the
 :doc:`min_modify command <min_modify>` documentation for details.
 
 Pair style mesont/tpm, compute style mesont, atom style mesont
@@ -170,6 +170,18 @@ performance characteristics on NVIDIA GPUs. Both, the KOKKOS
 and the :ref:`GPU package <PKG-GPU>` are maintained
 and allow running LAMMPS with GPU acceleration.
 
+Compute atom/molecule
+_____________________
+
+.. deprecated:: 11 Dec2015
+
+The atom/molecule command has been removed from LAMMPS since it was superseded
+by the more general and extensible "chunk infrastructure".  Here the system is
+partitioned in one of many possible ways - including using molecule IDs -
+through the :doc:`compute chunk/atom <compute_chunk_atom>` command and then
+summing is done using :doc:`compute reduce/chunk <compute_reduce_chunk>` Please
+refer to the :doc:`chunk HOWTO <Howto_chunk>` section for an overview.
+
 Fix ave/spatial and fix ave/spatial/sphere
 ------------------------------------------
 

doc/src/Developer.rst

@@ -24,4 +24,5 @@ of time and requests from the LAMMPS user community.
    Classes
    Developer_platform
    Developer_utils
+   Developer_internal
    Developer_grid

doc/src/Developer_internal.rst

@@ -0,0 +1,113 @@
+
+Internal Styles
+---------------
+
+LAMMPS has a number of styles that are not meant to be used in an input
+file and thus are not documented in the :doc:`LAMMPS command
+documentation <Commands_all>`.  The differentiation between user
+commands and internal commands is through the case of the command name:
+user commands and styles are all lower case, internal styles are all
+upper case.  Internal styles are not called from the input file, but
+their classes are instantiated by other styles.  Often they are
+created by other styles to store internal data or to perform actions
+regularly at specific steps of the simulation.
+
+The paragraphs below document some of those styles that have general
+utility and may be used to avoid redundant implementation.
+
+DEPRECATED Styles
+^^^^^^^^^^^^^^^^^
+
+The styles called DEPRECATED (e.g. pair, bond, fix, compute, region, etc.)
+have the purpose to inform users that a specific style has been removed
+or renamed.  This is achieved by creating an alias for the deprecated
+style to the corresponding class.  For example, the fix style DEPRECATED
+is aliased to fix style ave/spatial and fix style ave/spatial/sphere with
+the following code:
+
+.. code-block:: c++
+
+   FixStyle(DEPRECATED,FixDeprecated);
+   FixStyle(ave/spatial,FixDeprecated);
+   FixStyle(ave/spatial/sphere,FixDeprecated);
+
+The individual class will then determine based on the style name
+what action to perform:
+
+- inform that the style has been removed and what style replaces it, if any, and then error out
+- inform that the style has been renamed and then either execute the replacement or error out
+- inform that the style is no longer required, and it is thus ignored and continue
+
+There is also a section in the user's guide for :doc:`removed commands
+and packages <Commands_removed>` with additional explanations.
+
+Internal fix styles
+^^^^^^^^^^^^^^^^^^^
+
+fix DUMMY
+"""""""""
+
+Most fix classes cannot be instantiated before the simulation box has
+been created since they access data that is only available then.
+However, in some cases it is required that a fix must be at or close to
+the top of the list of all fixes.  In those cases an instance of the
+DUMMY fix style may be created by calling ``Modify::add_fix()`` and then
+later replaced by calling ``Modify::replace_fix()``.
+
+fix STORE/ATOM
+""""""""""""""
+
+Fix STORE/ATOM can be used as persistent storage of per-atom data.
+
+**Syntax**
+
+.. code-block:: LAMMPS
+
+   fix ID group-ID STORE/ATOM N1 N2 gflag rflag
+
+* ID, group-ID are documented in :doc:`fix <fix>` command
+* STORE/ATOM = style name of this fix command
+* N1 = 1, N2 = 0 : data is per-atom vector = single value per atom
+* N1 > 1, N2 = 0 : data is per-atom array = N1 values per atom
+* N1 > 0, N2 > 0 : data is per-atom tensor = N1xN2 values per atom
+* gflag = 1 communicate per-atom values with ghost atoms, 0 do not update ghost atom data
+* rflag = 1 store per-atom value in restart file, 0 do not store data in restart
+
+Similar functionality is also available through using custom per-atom
+properties with :doc:`fix property/atom <fix_property_atom>`.  The
+choice between the two fixes should be based on whether the user should
+be able to access this per-atom data: if yes, then fix property/atom is
+preferred, otherwise fix STORE/ATOM.
+
+fix STORE/GLOBAL
+""""""""""""""""
+
+Fix STORE/GLOBAL can be used as persistent storage of global data with support for restarts
+
+**Syntax**
+
+.. code-block:: LAMMPS
+
+   fix ID group-ID STORE/GLOBAL N1 N2
+
+* ID, group-ID are documented in :doc:`fix <fix>` command
+* STORE/GLOBAL = style name of this fix command
+* N1 >=1 : number of global items to store
+* N2 = 1 : data is global vector of length N1
+* N2 > 1 : data is global N1xN2 array
+
+fix STORE/LOCAL
+"""""""""""""""
+
+Fix STORE/LOCAL can be used as persistent storage for local data
+
+**Syntax**
+
+.. code-block:: LAMMPS
+
+   fix ID group-ID STORE/LOCAL Nreset Nvalues
+
+* ID, group-ID are documented in :doc:`fix <fix>` command
+* STORE/LOCAL = style name of this fix command
+* Nreset = frequency at which local data is available
+* Nvalues = number of values per local item, that is the number of columns

doc/src/Developer_notes.rst

@@ -270,7 +270,10 @@ There are multiple "signatures" that can be called:
 - ``Error::all(FLERR, idx, "Error message")``: this is for argument
   parsing where "idx" is the index (starting at 0) of the argument for a
   LAMMPS command that is causing the failure (use -1 for the command
-  itself).  The output may also include the last input line *before* and
+  itself).  For index 0, you need to use the constant ``Error::ARGZERO``
+  to work around the inability of some compilers to disambiguate between
+  a NULL pointer and an integer constant 0, even with an added type cast.
+  The output may also include the last input line *before* and
   *after*, if they differ due to substituting variables.  A textual
   indicator is pointing to the specific word that failed.  Using the
   constant ``Error::NOPOINTER`` in place of the *idx* argument will

doc/src/Errors_details.rst

@@ -1,12 +1,244 @@
-Error and warning details
+Errors and warnings details
-=========================
+===========================
 
-Many errors or warnings are self-explanatory and thus straightforward to
+Many errors and warnings that LAMMPS outputs are self-explanatory and
-resolve.  However, there are also cases, where there is no single cause
+thus straightforward to resolve.  However, there are also cases where
-and explanation, where LAMMPS can only detect symptoms of an error but
+there is no single cause or simple explanation that can be provided in a
-not the exact cause, or where the explanation needs to be more detailed than
+short message printed by LAMMPS.  Therefore, more detailed discussions
-what can be fit into a message printed by the program.  The following are
+of such scenarios are provided here; first on a more general level and
-discussions of such cases.
+then for specific errors.  In the latter cases, LAMMPS will output a
+short message and then provide a URL that links to a specific section on
+this page.
+
+.. contents::
+
+------
+
+General troubleshooting advice
+------------------------------
+
+Below are suggestions that can help to understand the causes of problems
+with simulations leading to errors or unexpected results.
+
+.. _hint01:
+
+Create a small test system
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Debugging problems often requires running a simulation many times with
+small modifications, thus it can be a huge time saver to first assemble
+a small test system input that has the same issue, but will take much
+time until it triggers the error condition.  Also, it will be easier to
+see what happens.
+
+.. _hint02:
+
+Visualize your trajectory
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To better understand what is causing problems, it is often very useful
+to visualize the system close to the point of failure.  It may be
+necessary to have LAMMPS output trajectory frames rather frequently.  To
+avoid gigantic files, you can use :doc:`dump_modify delay <dump_modify>`
+to delay output until the critical section is reached, and you can use a
+smaller test system (see above).
+
+.. _hint03:
+
+Parallel versus serial
+^^^^^^^^^^^^^^^^^^^^^^
+
+Issues where something is "lost" or "missing" often exhibit that issue
+only when running in parallel.  That doesn't mean there is no problem,
+only the symptoms are not triggering an error quickly.  Correspondingly,
+errors may be triggered faster with more processors and thus smaller
+sub-domains.
+
+.. _hint04:
+
+Segmentation Fault
+^^^^^^^^^^^^^^^^^^
+
+A segmentation fault is an error reported by the **operating system**
+and not LAMMPS itself.  It happens when a process tries to access a
+memory address that is not available.  This can have **many** reasons:
+memory has not been allocated, a memory buffer is not large enough, a
+memory address is computed from an incorrect index, a memory buffer is
+used after it has been freed, some general memory corruption.  When
+investigating a segmentation fault (aka segfault), it is important to
+determine which process is causing it; it may not always be LAMMPS.  For
+example, some MPI library implementations report a segmentation fault
+from their "mpirun" or "mpiexec" command when the application has been
+terminated unexpectedly.
+
+While a segmentation fault is likely an indication of a bug in LAMMPS,
+it need not always be; it can also be the consequence of too aggressive
+simulation settings.  For time critical code paths, LAMMPS will assume
+the user has chosen the settings carefully and will not make any checks
+to avoid to avoid performance penalties.
+
+A crucial step in resolving a segmentation fault is to identify the
+exact location in the code where it happens.  Please see `Errors_debug`
+for a couple of examples showing how to do this on a Linux machine.
+With this information -- a simple way to reproduce the segmentation
+fault and the exact :doc:`LAMMPS version <Manual_version>` and platform
+you are running on -- you can contact the LAMMPS developers or post in
+the LAMMPS forum to get assistance.
+
+.. _hint05:
+
+Fast moving atoms
+^^^^^^^^^^^^^^^^^
+
+Fast moving atoms may be "lost" or "missing" when their velocity becomes
+so large that they can cross a sub-domain within one timestep.  This
+often happens when atoms are too close, but atoms may also "move" too
+fast from sub-domain to sub-domain if the box changes rapidly.
+E.g. when setting a large an initial box with :doc:`shrink-wrap boundary
+conditions <boundary>` that collapses on the first step (in this case
+the solution is often using 'm' instead of 's' as a boundary condition).
+
+To reduce the impact of "close contacts", one can remove those atoms or
+molecules with something like :doc:`delete_atoms overlap 0.1 all all
+<delete_atoms>`.  With periodic boundaries, a close contact pair of
+atoms may be on opposite sides of the simulation box.  Another option
+would be to first run a minimization (aka quench) before starting
+the MD.  Reducing the time step can also help.  Many times, one just
+needs to "ease" the system into a balanced state and can then switch to
+more aggressive settings.
+
+The speed of atoms during an MD run depends on the steepness of the
+potential function and their mass.  Since the positions and velocities
+of atoms are computed with finite timesteps, the timestep needs to be
+small enough for stable numeric integration of the trajectory.  If the
+timestep is too large during initialization (or other instances of
+extreme dynamics), using :doc:`fix nve/limit <fix_nve_limit>` or
+:doc:`fix dt/reset <fix_dt_reset>` temporarily can help to avoid too
+large updates or adapt the timestep according to the displacements.
+
+.. _hint06:
+
+Ignoring lost atoms
+^^^^^^^^^^^^^^^^^^^
+
+It is tempting to use the :doc:`thermo_modify lost ignore
+<thermo_modify>` to avoid LAMMPS aborting with an error on lost atoms.
+This setting should, however, *only* be used when atoms *should* leave
+the system.  In general, ignoring a problem does not solve it.
+
+.. _hint07:
+
+Pressure, forces, positions becoming NaN or Inf
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Some potentials can overflow or have a division by zero with close
+contacts or bad geometries (for the given force styles in use) leading
+to forces that can no longer be represented as numbers.  Those will show
+as "NaN" or "Inf".  On most machines, the program will continue, but
+there is no way to recover from it and those NaN or Inf values will
+propagate.  So-called :doc:`"soft-core" potentials <pair_fep_soft>` or
+the :doc:`"soft" repulsive-only pair style <pair_soft>` are less prone
+for this behavior (depending on the settings in use) and can be used at
+the beginning of a simulation.  Also, single precision numbers can
+overflow much faster, so for the GPU or INTEL package it may be
+beneficial to run with double precision initially before switching to
+mixed or single precision for faster execution when the system has
+relaxed.
+
+.. _hint08:
+
+Communication cutoff
+^^^^^^^^^^^^^^^^^^^^
+
+The communication cutoff determines the "overlap" between sub-domains
+and atoms in these regions are referred to in LAMMPS as "ghost atoms".
+This region has to be large enough to contain all atoms of a bond,
+angle, dihedral, or improper with just one atom in the actual
+sub-domain.  Typically, this cutoff is set to the largest cutoff from
+the :doc:`pair style(s) <pair_style>` plus the :doc:`neighbor list skin
+distance <neighbor>` and will typically be sufficient for all bonded
+interactions.  But if the pair style cutoff is small, this may not be
+enough.  LAMMPS will print a warning in this case using some heuristic
+based on the equilibrium bond length, but that still may not be
+sufficient for cases where the force constants are small and thus bonds
+may be stretched very far.  The communication cutoff can be adjusted
+with :doc:`comm_modify cutoff \<value\> <comm_modify>`, but setting this
+too large will waste CPU time and memory.
+
+.. _hint09:
+
+Neighbor list settings
+^^^^^^^^^^^^^^^^^^^^^^
+
+Every time LAMMPS rebuilds the neighbor lists, LAMMPS will also check
+for "lost" or "missing" atoms.  Thus it can help to use very
+conservative :doc:`neighbor list settings <neigh_modify>` and then
+examine the neighbor list statistics if the neighbor list rebuild can be
+safely delayed.  Rebuilding the neighbor list less frequently
+(i.e. through increasing the *delay* or *every*) setting has diminishing
+returns and increasing risks.
+
+.. _hint10:
+
+Units
+^^^^^
+
+A frequent cause for a variety of problems is due to using the wrong
+:doc:`units <units>` settings for a particular potentials, especially
+when reading them from a potential file.  Most of the (example)
+potentials bundled with LAMMPS have a "UNITS:" tag that allows LAMMPS to
+check of the units are consistent with what is intended, but potential
+files from publications or potential parameter databases may lack this
+metadata information and thus will not error out or warn when using the
+wrong setting.  Most potential files usually use "metal" units, but some
+are parameterized for other settings, most notably :doc:`ReaxFF
+potentials <pair_reaxff>` that use "real" units.
+
+Also, individual parameters for :doc:`pair_coeff <pair_coeff>` commands
+taken from publications or other MD software may need to be converted
+and sometimes in unexpected ways.  Thus some careful checking is
+recommended.
+
+.. _hint11:
+
+No error message printed
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+In some cases -- especially when running in parallel with MPI -- LAMMPS
+may stop without displaying an error.  But the fact that nothing was
+displayed does not mean there was not an error message. Instead it is
+highly likely that the message was written to a buffer and LAMMPS was
+aborted before the buffer was output.  Usually, output buffers are
+output for every line of output, but sometimes this is delayed until
+4096 or 8192 bytes of output have been accumulated.  This buffering for
+screen and logfile output can be disabled by using the :ref:`-nb
+or -nonbuf <nonbuf>` command-line flag.  This is most often needed when
+debugging crashing multi-replica calculations.
+
+.. _hint12:
+
+Errors before or after the simulation box is created
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+As critical step in a LAMMPS input is when the simulation box is
+defined, either with a :doc:`create_box command <create_box>`, a
+:doc:`read_data command <read_data>`, or a :doc:`read_restart command
+<read_restart>`.  After this step, certain settings are locked in (e.g.
+units, or number of atom, bond, angle, dihedral, improper types) and
+cannot be changed after that.  Consequently, commands that change such
+settings (e.g. :doc:`units <units>`) are only allowed before the box is
+defined.  Very few commands can be used before and after, like
+:doc:`pair_style <pair_style>` (but not :doc:`pair_coeff <pair_coeff>`).
+Most LAMMPS commands must be used after the simulation box is created.
+
+Consequently, LAMMPS will stop with an error, if a command is used in
+the wrong place.  This is not always obvious.  So index or string style
+:doc:`variables <variable>` can be expanded anywhere in the input, but
+equal style (or similar) variables can only be expanded before the box
+is defined if they do not reference anything that cannot be defined
+before the box (e.g. a compute or fix reference or a thermo keyword).
+
+------
 
 .. _err0001:
 
@@ -23,19 +255,20 @@ The header section informs LAMMPS how many entries or lines are expected
 in the various sections (like Atoms, Masses, Pair Coeffs, *etc.*\ ) of
 the data file.  If there is a mismatch, LAMMPS will either keep reading
 beyond the end of a section or stop reading before the section has
-ended.  In that case the next line will not contain a recognized keyword.
+ended.  In that case the next line will not contain a recognized
+keyword.
 
-Such a mismatch can also happen when the first line of the data
+Such a mismatch can also happen when the first line of the data is *not*
-is *not* a comment as required by the format, but a line with a valid
+a comment as required by the format, but a line with a valid header
-header keyword.  That would result in LAMMPS expecting, for instance,
+keyword.  That would result in LAMMPS expecting, for instance, 0 atoms
-0 atoms because the "atoms" header line is the first line and thus
+because the "atoms" header line is the first line and thus treated as a
-treated as a comment.
+comment.
 
 Another possibility to trigger this error is to have a keyword in the
 data file that corresponds to a fix (e.g. :doc:`fix cmap <fix_cmap>`)
 but the :doc:`read_data <read_data>` command is missing the (optional)
-arguments that identify the fix and the header keyword and section
+arguments that identify the fix and its header and section keywords.
-keyword or those arguments are inconsistent with the keywords in the
+Alternatively, those arguments are inconsistent with the keywords in the
 data file.
 
 .. _err0002:
@@ -45,35 +278,676 @@ Incorrect format in ... section of data file
 
 This error happens when LAMMPS reads the contents of a section of a
 :doc:`data file <read_data>` and the number of parameters in the line
-differs from what is expected.  This most commonly happens, when the
+differs from what is expected.  This most commonly happens when the atom
-atom style is different from what is expected for a specific data file
+style is different from what is expected for a specific data file since
-since changing the atom style usually changes the format of the line.
+changing the atom style usually changes the format of the line.
 
-This error can also happen when the number of entries indicated in the
+This error can also occur when the number of entries indicated in the
 header of a data file (e.g. the number of atoms) is larger than the
 number of lines provided (e.g. in the corresponding Atoms section)
-and then LAMMPS will continue reading into the next section and that
+causing LAMMPS to continue reading into the next section which has a
-would have a completely different format.
+completely different format.
 
 .. _err0003:
 
 Illegal variable command: expected X arguments but found Y
 ----------------------------------------------------------
 
-This error indicates that there are the wrong number of arguments for a
+This error indicates that a variable command has the wrong number of
-specific variable command, but a common reason for that is a variable
+arguments.  A common reason for this is that the variable expression has
-expression that has whitespace but is not enclosed in single or double
+whitespace, but is not enclosed in single or double quotes.
-quotes.
 
 To explain, the LAMMPS input parser reads and processes lines.  The
 resulting line is broken down into "words".  Those are usually
-individual commands, labels, names, values separated by whitespace (a
+individual commands, labels, names, and values separated by whitespace
-space or tab character).  For "words" that may contain whitespace, they
+(a space or tab character).  For "words" that may contain whitespace,
-have to be enclosed in single (') or double (") quotes.  The parser will
+they have to be enclosed in single (') or double (") quotes.  The parser
-then remove the outermost pair of quotes and then pass that string as
+will then remove the outermost pair of quotes and pass that string as
 "word" to the variable command.
 
-Thus missing quotes or accidental extra whitespace will lead to the
+Thus missing quotes or accidental extra whitespace will trigger this
-error shown in the header because the unquoted whitespace will result
+error because the unquoted whitespace will result in the text being
-in the text being broken into more "words", i.e. the variable expression
+broken into more "words", i.e. the variable expression being split.
-being split.
+
+.. _err0004:
+
+Out of range atoms - cannot compute ...
+---------------------------------------
+
+The PPPM (and also PPPMDisp and MSM) methods need to assemble a grid of
+electron density data derived from the (partial) charges assigned to the
+atoms.  These charges are smeared out across multiple grid points (see
+:doc:`kspace_modify order <kspace_modify>`).  When running in parallel
+with MPI, LAMMPS uses a :doc:`domain decomposition scheme
+<Developer_par_part>` where each processor manages a subset of atoms and
+thus also a grid representing the density.  The processor's grid covers
+the actual volume of the sub-domain and some extra space corresponding
+to the :doc:`neighbor list skin <neighbor>`.  These are then
+:doc:`combined and redistributed <Developer_par_long>` for parallel
+processing of the long-range component of the Coulomb interaction.
+
+The ``Out of range atoms`` error can happen when atoms move too fast,
+the neighbor list skin is too small, or the neighbor lists are not
+updated frequently enough.  The smeared charges cannot then be fully
+assigned to the density grid for all atoms.  LAMMPS checks for this
+condition and stops with an error.  Most of the time, this is an
+indication of a system with very high forces, often at the beginning of
+a simulation or when boundary conditions are changed.  The error becomes
+more likely with more MPI processes.
+
+There are multiple options to explore for avoiding the error.  The best
+choice depends strongly on the individual system, and often a
+combination of changes is required.  For example, more conservative MD
+parameter settings can be used (larger neighbor skin, shorter time step,
+more frequent neighbor list updates).  Sometimes, it helps to revisit
+the system generation and avoid close contacts when building it.
+Otherwise one can use the :doc:`delete_atoms overlap<delete_atoms>`
+command to delete those close contact atoms or run a minimization before
+the MD.  It can also help to temporarily use a cutoff-Coulomb pair style
+and no kspace style until the system has somewhat equilibrated and then
+switch to the long-range solver.
+
+.. _err0005:
+
+Bond (or angle, dihedral, improper, cmap, or shake) atoms missing
+-----------------------------------------------------------------
+
+The second atom needed to compute a particular bond (or the third or
+fourth atom for angle, dihedral, or improper) is missing on the
+indicated timestep and processor.  Typically, this is because the two
+bonded atoms have become too far apart relative to the communication
+cutoff distance for ghost atoms.  By default, the communication cutoff
+is set by the pair cutoff.  However, to accommodate larger distances
+between topologically connected atoms, it can be manually adjusted using
+:doc:`comm_modify <comm_modify>` at the cost of increased communication
+and more ghost atoms.  However, missing bond atoms may also indicate
+that there are unstable dynamics which caused the atoms to blow apart.
+In this scenario, increasing the communication distance will not solve
+the underlying issue.  Rather, see :ref:`Fast moving atoms <hint05>` and
+:ref:`Neighbor list settings <hint09>` in the general troubleshooting
+section above for ideas to fix unstable dynamics.
+
+If atoms are intended to be lost during a simulation (e.g. due to open
+boundary conditions or :doc:`fix evaporate <fix_evaporate>`) such that
+two bonded atoms may be lost at different times from each other, this
+error can be converted to a warning or turned off using the *lost/bond*
+keyword in the :doc:`thermo_modify <thermo_modify>` command.
+
+.. _err0006:
+
+Non-numeric atom coords or pressure or box dimensions - simulation unstable
+---------------------------------------------------------------------------
+
+This error usually occurs due to overly aggressive simulation settings
+or issues with the system geometry or the potential.  See
+:ref:`Pressure, forces, positions becoming NaN or Inf <hint07>` above in
+the general troubleshooting section.  This error is more likely to
+happen during equilibration, so it can help to do a minimization before
+or even add a second or third minimization after running a few
+equilibration MD steps.  It also is more likely when directly using a
+Nose-Hoover (or other) barostat, and thus it may be advisable to run
+with only a thermostat for a bit until the potential energy has
+stabilized.
+
+.. _err007:
+
+Fix used in ... not computed at compatible time
+-----------------------------------------------
+
+Many fix styles are invoked only every *nevery* timesteps, which means
+their data is only valid on those steps.  When data from a fix is used
+as input for a compute, a dump, another fix, or thermo output, it must
+read that data at timesteps when the fix in question was invoked, i.e.
+on timesteps that are multiples of its *nevery* setting.  If this is not
+the case, LAMMPS will stop with an error.  To remedy this, it may be
+required to change the output frequency or the *nevery* setting of the
+fix.
+
+.. _err0008:
+
+Lost atoms ...
+--------------
+
+A simulation stopping with an error due to lost atoms can have multiple
+causes.  By default, LAMMPS checks for whether the total number of atoms
+is consistent with the sum of atoms "owned" by MPI processors every time
+that thermodynamic output is written.  In the majority of cases, lost
+atoms are unexpected and a result of extremely high velocities causing
+instabilities in the system.  Such velocities can result from a variety
+of issues.  For ideas on how to track down issues with unexpected lost
+atoms, see :ref:`Fast moving atoms <hint05>` and :ref:`Neighbor list
+settings <hint09>` in the general troubleshooting section above.  In
+specific situations however, losing atoms is expected material behavior
+(e.g. with sputtering and surface evaporation simulations), and an
+unwanted crash can be avoided by changing the :doc:`thermo_modify lost
+<thermo_modify>` keyword from the default 'error' to 'warn' or 'ignore'
+(though heed the advice in :ref:`Ignoring lost atoms <hint06>` above!).
+
+.. _err0009:
+
+Too many neighbor bins
+----------------------
+
+The simulation box is or has become too large relative to the size of a
+neighbor bin (which in turn depends on the largest pair-wise cutoff by
+default) such that LAMMPS is unable to store the needed number of bins.
+This typically implies the simulation box has expanded too far.  That
+can occur when some atoms move rapidly apart with shrink-wrap boundaries
+or when a fix (like fix deform or a barostat) excessively grows the
+simulation box.  This can also happen if the largest pair-wise cutoff is
+small.  In this case, the error can be avoided by using the
+:doc:`neigh_modify command <neigh_modify>` to set the bin width to a
+suitably large value.
+
+.. _err0010:
+
+Unrecognized ... style ... is part of ... package which is not enabled in this LAMMPS binary
+--------------------------------------------------------------------------------------------
+
+The LAMMPS executable (binary) being used was not compiled with a
+package containing the specified style.  This indicates that the
+executable needs to be re-built after enabling the correct package in
+the relevant Makefile or CMake build directory.  See
+:doc:`Section 3. Build LAMMPS <Build>` for more details.  One can check
+if the expected package and pair style is present in the executable by
+running it with the ``-help`` (or ``-h``) flag on the command line.  One
+common oversight, especially for beginner LAMMPS users, is enabling the
+package but forgetting to run commands to rebuild (e.g., to run the
+final ``make`` or ``cmake`` command).
+
+If this error occurs with an executable that the user does not control
+(e.g., through a module on HPC clusters), the user will need to get in
+contact with the relevant person or people who can update the
+executable.
+
+.. _err011:
+
+Energy or stress was not tallied by pair style
+----------------------------------------------
+
+This warning can be printed by computes from the :ref:`TALLY package
+<PKG-TALLY>`.  Those use a callback mechanism that only work for regular
+pair-wise additive pair styles like :doc:`Lennard-Jones <pair_lj>`,
+:doc:`Morse <pair_morse>`, :doc:`Born-Meyer-Huggins <pair_born>`, and
+similar.  Such required callbacks have not been implemented for
+many-body potentials so one would have to implement them to add
+compatibility with these computes (which may be difficult to do in a
+generic fashion).  Whether this warning indicates that contributions to
+the computed properties are missing depends on the groups used.  At any
+rate, careful testing of the results is advised when this warning
+appears.
+
+.. _err0012:
+
+fmt::format_error
+-----------------
+
+LAMMPS uses the `{fmt} library <https://fmt.dev>`_ for advanced string
+formatting tasks.  This is similar to the ``printf()`` family of
+functions from the standard C library, but more flexible.  If there is a
+bug in the LAMMPS code and the format string does not match the list of
+arguments or has some other error, this error message will be shown.
+You should contact the LAMMPS developers and report the bug as a `GitHub
+Bug Report Issue <https://github.com/lammps/lammps/issues>`_ along with
+sufficient information to easily reproduce it.
+
+
+.. _err0013:
+
+Substitution for illegal variable
+---------------------------------
+
+A variable in an input script or a variable expression was not found in
+the list of valid variables.  The most common reason for this is a typo
+somewhere in the input file such that the expression uses an invalid
+variable name.  The second most common reason is omitting the curly
+braces for a direct variable with a name that is not a single letter.
+For example:
+
+.. code-block:: LAMMPS
+
+   variable cutoff index 10.0
+   pair_style lj/cut ${cutoff}  # this is correct
+   pair_style lj/cut $cutoff    # this is incorrect, LAMMPS looks for 'c' instead of 'cutoff'
+   variable c      index 5.0    # if $c is defined, LAMMPS subsitutes only '$c' and reads: 5utoff
+
+Another potential source of this error may be invalid command line
+variables (-var or -v argument) used when launching LAMMPS from an
+interactive shell or shell scripts.  An uncommon source for this error
+is using the :doc:`next command <next>` to advance through a list of
+values provided by an index style variable.  If there is no remaining
+element in the list, LAMMPS will delete the variable and any following
+expansion or reference attempt will trigger the error.
+
+Users with harder-to-track variable errors might also find reading the
+:doc:`Parsing rules for input scripts <Commands_parse>` helpful.
+
+.. _err0014:
+
+Bond atom missing in image check or box size check
+--------------------------------------------------
+
+This can be either an error or a warning depending on your
+:doc:`thermo_modify settings <thermo_modify>`.  It is flagged in a part
+of the LAMMPS code where it updates the domain decomposition and before
+it builds the neighbor lists.  It checks that both atoms of a bond are
+within the communication cutoff of a subdomain.  It is usually caused by
+atoms moving too fast (see the :ref:`paragraph on fast moving atoms
+<hint05>`), or by the :doc:`communication cutoff being too small
+<comm_modify>`, or by waiting too long between :doc:`sub-domain and
+neighbor list updates <neigh_modify>`.
+
+.. _err0015:
+
+Cannot use neighbor bins - box size \<\< cutoff
+-----------------------------------------------
+
+LAMMPS is unable to build neighbor bins since the size of the box is
+much smaller than an interaction cutoff in at least one of its
+dimensions.  Typically, this error is triggered when the simulation box
+has one very thin dimension. If a cubic neighbor bin had to fit exactly
+within the thin dimension, then an inordinate amount of bins would be
+created to fill space.  This error can be avoided using the generally
+slower :doc:`nsq neighbor style <neighbor>` or by increasing the size of
+the smallest box lengths.
+
+.. _err0016:
+
+Did not assign all atoms correctly
+----------------------------------
+
+This error happens most commonly when :doc:`reading a data file
+<read_data>` under :doc:`non-periodic boundary conditions<boundary>`.
+Only atoms with positions **inside** the simulation box will be read and
+thus any atoms outside the box will be skipped and the total atom count
+will not match, which triggers the error.  This does not happen with
+periodic boundary conditions where atoms outside the principal box will
+be "wrapped" into the principal box and their image flags set
+accordingly.
+
+Similar errors can happen with the :doc:`replicate command<replicate>`
+or the :doc:`read_restart command<read_restart>`.  In these cases the
+cause may be a problematic geometry, an insufficient communication
+cutoff, or a bug in the LAMMPS source code.  In these cases it is
+advisable to set up :ref:`small test case <hint01>` for testing and
+debugging.  This will be required in case you need to get help from a
+LAMMPS developer.
+
+.. _err0017:
+
+Domain too large for neighbor bins
+----------------------------------
+
+The domain has become extremely large so that neighbor bins cannot be
+used.  Too many neighbor bins would need to be created to fill space.
+Most likely, one or more atoms have been blown a great distance out of
+the simulation box or a fix (like fix deform or a barostat) has
+excessively grown the simulation box.
+
+.. _err0018:
+
+Step X: (h)bondchk failed
+-------------------------
+
+This error is a consequence of the heuristic memory allocations for
+buffers of the regular ReaxFF version.  In ReaxFF simulations, the lists
+of bonds and hydrogen bonds can change due to chemical reactions.  The
+default approach, however, assumes that these changes are not very
+large, so it allocates buffers for the current system setup plus a
+safety margin.  This can be adjusted with the :doc:`safezone, mincap,
+and minhbonds settings of the pair style <pair_reaxff>`, but only to
+some extent.  When equilibrating a new system, or simulating a sparse
+system in parallel, this can be difficult to control and become
+wasteful.  A simple workaround is often to break a simulation down in
+multiple chunks.  A better approach, however, is to compile and use the
+KOKKOS package version of ReaxFF (you do not need a GPU for that, but
+can also compile it in serial or OpenMP mode), which uses a more robust
+memory allocation approach.
+
+.. _err0019:
+
+Numeric index X is out of bounds
+--------------------------------
+
+This error most commonly happens when setting force field coefficients
+with either the :doc:`pair_coeff <pair_coeff>`, the :doc:`bond_coeff
+<bond_coeff>`, the :doc:`angle_coeff <angle_coeff>`, the
+:doc:`dihedral_coeff <dihedral_coeff>`, or the :doc:`improper_coeff
+<improper_coeff>` command.  These commands accept type labels, explicit
+numbers, and wildcards for ranges of numbers.  If the numeric value of
+any of these is outside the valid range (defined by the number of
+corresponding types), LAMMPS will stop with this error.  A few other
+commands and styles also allow ranges of numbers and check using the
+same method and thus print the same kind of error.
+
+The cause is almost always a typo in the input or a logic error when
+defining the values or ranges.  So one needs to carefully review the
+input.  Along with the error, LAMMPS will print the valid range as a
+hint.
+
+.. _err0020:
+
+Compute, fix, or variable vector or array is accessed out-of-range
+------------------------------------------------------------------
+
+When accessing an individual element of a global vector or array or a
+per-atom vector or array provided by a compute or fix or atom-style or
+vector-style variable or data from a specific atom, an index in square
+brackets ("[ ]") (or two indices) must be provided to determine which
+element to access and it must be in a valid range or else LAMMPS would
+access invalid data or crash with a segmentation fault.  In the two most
+common cases, where this data is accessed, :doc:`variable expressions
+<variable>` and :doc:`thermodynamic output <thermo_style>`, LAMMPS will
+check for valid indices and stop with an error otherwise.
+
+While LAMMPS is written in C++ (which uses 0 based indexing) these
+indices start at 1 (i.e. similar to Fortran).  Any index smaller than 1
+or larger than the maximum allowed value should trigger this error.
+Since this kind of error frequently happens with rather complex
+expressions, it is recommended to test these with small test systems,
+where the values can be tracked with output files for all relevant
+properties at every step.
+
+.. _err0021:
+
+Incorrect args for pair coefficients (also bond/angle/dihedral/improper coefficients)
+-------------------------------------------------------------------------------------
+
+The parameters in the :doc:`pair_coeff <pair_coeff>` command for a
+specified :doc:`pair_style <pair_style>` have a missing or erroneous
+argument.  The same applies when seeing this error for :doc:`bond_coeff
+<bond_coeff>`, :doc:`angle_coeff <angle_coeff>`, :doc:`dihedral_coeff
+<dihedral_coeff>`, or :doc:`improper_coeff <improper_coeff>` and their
+respective style commands when using the MOLECULE or EXTRA-MOLECULE
+packages.  The cases below describe some ways to approach pair
+coefficient errors, but the same strategies apply to bonded systems as
+well.
+
+Outside of normal typos, this error can have several sources.  In all
+cases, the first step is to compare the command arguments to the
+expected format found in the corresponding :doc:`pair_style
+<pair_style>` page.  This can reveal cases where, for example, a pair
+style was changed, but the pair coefficients were not updated.  This can
+happen especially with pair style variants such as :doc:`pair_style eam
+<pair_eam>` vs. :doc:`pair_style eam/alloy <pair_style>` that look very
+similar but accept different parameters (the latter 'eam/alloy' variant
+takes element type names while 'eam' does not).
+
+Another common source of coefficient errors is when using multiple pair
+styles with commands such as :doc:`pair_style hybrid <pair_hybrid>`.
+Using hybrid pair styles requires adding an extra "label" argument in
+the coefficient commands that designates which pair style the command
+line refers to.  Moreover, if the same pair style is used multiple
+times, this label must be followed by an additional numeric argument.
+Also, different pair styles may require different arguments.
+
+This error message might also require a close look at other LAMMPS input
+files that are read in by the input script, such as data files or
+restart files.
+
+.. _err0022:
+
+Energy was not tallied on needed timestep (also virial, per-atom energy, per-atom virial)
+-----------------------------------------------------------------------------------------
+
+This error is generated when LAMMPS attempts to access an out-of-date or
+non-existent energy, pressure, or virial.  For efficiency reasons,
+LAMMPS does *not* calculate these quantities when the forces are
+calculated on every timestep or iteration.  Global quantities are only
+calculated when they are needed for :doc:`thermo <thermo_style>` output
+(at the beginning, end, and at regular intervals specified by the
+:doc:`thermo <thermo>` command).  Similarly, per-atom quantities are
+only calculated if they are needed to write per-atom energy or virial to
+a dump file.  This system works fine for simple input scripts.  However,
+the many user-specified `variable`, `fix`, and `compute` commands that
+LAMMPS provides make it difficult to anticipate when a quantity will be
+requested.  In some use cases, LAMMPS will figure out that a quantity is
+needed and arrange for it to be calculated on that timestep e.g. if it
+is requested by :doc:`fix ave/time <fix_ave_time>` or similar commands.
+If that fails, it can be detected by a mismatch between the current
+timestep and when a quantity was last calculated, in which case an error
+message of this type is generated.
+
+The most common cause of this type of error is requesting a quantity
+before the start of the simulation.
+
+.. code-block:: LAMMPS
+
+   # run 0 post no               # this will fix the error
+   variable e equal pe           # requesting energy compute
+   print "Potential energy = $e" # this will generate the error
+   run 1000                      # start of simulation
+
+This situation can be avoided by adding in a "run 0" command, as
+explained in more detail in the "Variable Accuracy" section of the
+:doc:`variable <variable>` doc page.
+
+Another cause is requesting a quantity on a timestep that is not a
+thermo or dump output timestep.  This can often be remedied by
+increasing the frequency of thermo or dump output.
+
+.. _err0023:
+
+Molecule auto special bond generation overflow
+----------------------------------------------
+
+In order to correctly apply the :doc:`special_bonds <special_bonds>`
+settings (also known as "exclusions"), LAMMPS needs to maintain for each
+atom a list of atoms that are connected to this atom, either directly
+with a bond or indirectly through bonding with an intermediate atom(s).
+The purpose is to either remove or tag those pairs of atoms in the
+neighbor list.  This information is stored with individual atoms and
+thus the maximum number of such "special" neighbors is set when the
+simulation box is created.  When reading (relative) geometry and
+topology of a 'molecule' from a :doc:`molecule file <molecule>`, LAMMPS
+will build the list of such "special" neighbors for the molecule atom
+(if not given in the molecule file explicitly).  The error is triggered
+when the resulting list is too long for the space reserved when creating
+the simulation box.  The solution is to increase the corresponding
+setting.  Overestimating this value will only consume more memory, and
+is thus a safe choice.
+
+.. _err0024:
+
+Molecule topology/atom exceeds system topology/atom
+---------------------------------------------------
+
+LAMMPS uses :doc:`domain decomposition <Developer_par_part>` to
+distribute data (i.e. atoms) across the MPI processes in parallel runs.
+This includes topology data about bonds, angles, dihedrals, impropers
+and :doc:`"special" neighbors <special_bonds>`.  This information is
+stored with either one or all atoms involved in such a topology entry
+(which of the two option applies depends on the :doc:`newton <newton>`
+setting for bonds).  When reading a data file, LAMMPS analyzes the
+requirements for this file and then the values are "locked in" and
+cannot be extended.
+
+So loading a molecule file that requires more of the topology per atom
+storage or adding a data file with such needs will lead to an error.  To
+avoid the error, one or more of the `extra/XXX/per/atom` keywords are
+required to extend the corresponding storage.  It is no problem to
+choose those numbers generously and have more storage reserved than
+actually needed, but having these numbers set too small will lead to an
+error.
+
+.. _err0025:
+
+Molecule topology type exceeds system topology type
+---------------------------------------------------
+
+The total number of atom, bond, angle, dihedral, and improper types is
+"locked in" when LAMMPS creates the simulation box.  This can happen
+through either the :doc:`create_box <create_box>`, the :doc:`read_data
+<read_data>`, or the :doc:`read_restart <read_restart>` command.  After
+this it is not possible to refer to an additional type.  So loading a
+molecule file that uses additional types or adding a data file that
+would require additional types will lead to an error.  To avoid the
+error, one or more of the `extra/XXX/types` keywords are required to
+extend the maximum number of the individual types.
+
+.. _err0026:
+
+Molecule attributes do not match system attributes
+--------------------------------------------------
+
+Choosing an :doc:`atom_style <atom_style>` in LAMMPS determines which
+per-atom properties are available.  In a :doc:`molecule file
+<molecule>`, however, it is possible to add sections (for example Masses
+or Charges) that are not supported by the atom style.  Masses for
+example, are usually not a per-atom property, but defined through the
+atom type.  Thus it would not be required to have a Masses section and
+the included data would be ignored.  LAMMPS prints this warning to
+inform about this case.
+
+.. _err0027:
+
+Inconsistent image flags
+------------------------
+
+This warning happens when the distance between the *unwrapped* x-, y-,
+or z-components of the coordinates of a bond is larger than half the box
+with periodic boundaries or larger than the box with non-periodic
+boundaries.  It means that the positions and image flags have become
+inconsistent.  LAMMPS will still compute bonded interactions based on
+the closest periodic images of the atoms and thus in most cases the
+results will be correct.  However they can cause problems when such
+atoms are used with the fix rigid or replicate commands.  Thus, it is
+good practice to update the system so that the message does not appear.
+It will help with future manipulations of the system.
+
+There is one case where this warning *must* appear: when you have a
+chain of connected bonds that pass through the entire box and connect
+back to the first atom in the chain through periodic boundaries,
+i.e. some kind of "infinite polymer".  In that case, the bond image
+flags *must* be inconsistent for the one bond that reaches back to the
+beginning of the chain.
+
+
+.. _err0028:
+
+No fixes with time integration, atoms won't move
+------------------------------------------------
+
+This warning will be issued if LAMMPS encounters a :doc:`run <run>`
+command that does not have a preceding :doc:`fix <fix>` command that
+updates atom/object positions and velocities per step.  In other words,
+there are no fixes detected that perform velocity-Verlet time
+integration, such as :doc:`fix nve <fix_nve>`.  Note that this alert
+does not mean that there are no active fixes.  LAMMPS has a very wide
+variety of fixes, many of which do not move objects but also operate
+through steps, such as printing outputs (e.g. :doc:`fix print
+<fix_print>`), performing calculations (e.g. :doc:`fix ave/time
+<fix_ave_time>`), or changing other system parameters (e.g. :doc:`fix
+dt/reset <fix_dt_reset>`).  It is up to the user to determine whether
+the lack of a time-integrating fix is intentional or not.
+
+
+.. _err0029:
+
+System is not charge neutral, net charge = ...
+----------------------------------------------
+
+the sum of charges in the system is not zero.  When a system is not
+charge-neutral, methods that evolve/manipulate per-atom charges,
+evaluate Coulomb interactions, evaluate Coulomb forces, or
+evaluate/manipulate other properties relying on per-atom charges may
+raise this warning.  A non-zero net charge most commonly arises after
+setting per-atom charges :doc:`set <set>` such that the sum is non-zero
+or by reading in a system through :doc:`read_data <read_data>` where the
+per-atom charges do not sum to zero.  However, a loss of charge
+neutrality may occur in other less common ways, like when charge
+equilibration methods (e.g., :doc:`fix qeq <fix_qeq>`) fail.
+
+A similar warning/error may be raised when using certain charge
+equilibration methods: :doc:`fix qeq <fix_qeq>`, :doc:`fix qeq/comb
+<fix_qeq_comb>`, :doc:`fix qeq/reaxff <fix_qeq_reaxff>`, and :doc:`fix
+qtpie/reaxff <fix_qtpie_reaxff>`.  In such cases, this warning/error
+will be raised for the fix :doc:`group <group>` when the group has a
+non-zero net charge.
+
+When the system is expected to be charge-neutral, this warning often
+arises due to an error in the lammps input (e.g., an incorrect :doc:`set
+<set>` command, error in the data file read by :doc:`read_data
+<read_data>`, incorrectly grouping atoms with charge, etc.).  If the
+system is NOT expected to be charge-neutral, the user should make sure
+that the method(s) used are appropriate for systems with a non-zero net
+charge.  Some commonly used fixes for charge equilibration :doc:`fix qeq
+<fix_qeq>`, pair styles that include charge interactions
+:doc:`pair_style coul/XXX <pair_coul>`, and kspace methods
+:doc:`kspace_style <kspace_style>` can, in theory, support systems with
+non-zero net charge.  However, non-zero net charge can lead to spurious
+artifacts.  The severity of these artifacts depends on the magnitude of
+total charge, system size, and methods used.  Before running simulations
+or calculations for systems with non-zero net charge, users should test
+for artifacts and convergence of properties.
+
+.. _err0030:
+
+Variable evaluation before simulation box is defined
+----------------------------------------------------
+
+This error happens, when trying to expand or use an equal- or atom-style
+variable (or an equivalent style), where the expression contains a
+reference to something (e.g. a compute reference, a property of an atom,
+or a thermo keyword) that is not allowed to be used before the
+simulation box is defined.  See the paragraph on :ref:`errors before or
+after the simulation box is created <hint12>` for additional
+information.
+
+.. _err0031:
+
+Invalid thermo keyword 'X' in variable formula
+----------------------------------------------
+
+This error message is often misleading.  It is caused when evaluating a
+:doc:`variable command <variable>` expression and LAMMPS comes across a
+string that it does not recognize.  LAMMPS first checks if a string is a
+reference to a compute, fix, custom property, or another variable by
+looking at the first 2-3 characters (and if it is, it checks whether the
+referenced item exists).  Next LAMMPS checks if the string matches one
+of the available functions or constants.  If that fails, LAMMPS will
+assume that this string is a :doc:`thermo keyword <thermo_style>` and
+let the code for printing thermodynamic output return the corresponding
+value.  However, if this fails too, since the string is not a thermo
+keyword, LAMMPS stops with the 'Invalid thermo keyword' error.  But it
+is also possible, that there is just a typo in the name of a valid
+variable function.  Thus it is recommended to check the failing variable
+expression very carefully.
+
+.. _err0032:
+
+One or more atoms are time integrated more than once
+----------------------------------------------------
+
+This is probably an error since you typically do not want to advance the
+positions or velocities of an atom more than once per timestep.  This
+typically happens when there are multiple fix commands that advance atom
+positions with overlapping groups.  Also, for some fix styles it is not
+immediately obvious that they include time integration.  Please check
+the documentation carefully.
+
+.. _err0033:
+
+XXX command before simulation box is defined
+--------------------------------------------
+
+This error occurs when trying to execute a LAMMPS command that requires
+information about the system dimensions, or the number atom, bond,
+angle, dihedral, or improper types, or the number of atoms or similar
+data that is only available *after* the simulation box has been created.
+See the paragraph on :ref:`errors before or after the simulation box is
+created <hint12>` for additional information.
+
+.. _err0034:
+
+XXX command after simulation box is defined
+--------------------------------------------
+
+This error occurs when trying to execute a LAMMPS command that changes a
+global setting *after* it is locked in when the simulation box is
+created (for instance defining the :doc:`atom style <atom_style>`,
+:doc:`dimension <dimension>`, :doc:`newton <newton>`, or :doc:`units
+<units>` setting).  These settings may only be changed *before* the
+simulation box has been created.  See the paragraph on :ref:`errors
+before or after the simulation box is created <hint12>` for additional
+information.

doc/src/Errors_warnings.rst

@@ -1,11 +1,15 @@
 Warning messages
 ================
 
-This is an alphabetic list of the WARNING messages LAMMPS prints out
+This is an alphabetic list of some of the WARNING messages LAMMPS prints
-and the reason why.  If the explanation here is not sufficient, the
+out and the reason why.  If the explanation here is not sufficient, the
-documentation for the offending command may help.  Warning messages
+documentation for the offending command may help.  This is a historic
-also list the source file and line number where the warning was
+list and no longer updated.  Instead the LAMMPS developers are trying
-generated.  For example, a message like this:
+to provide more details right with the error message or link to a
+paragraph with :doc:`detailed explanations <Errors_details>`.
+
+Warning messages also list the source file and line number where the
+warning was generated.  For example, a message like this:
 
 .. parsed-literal::
 
@@ -14,7 +18,7 @@ generated.  For example, a message like this:
 means that line #187 in the file src/domain.cpp generated the error.
 Looking in the source code may help you figure out what went wrong.
 
-Doc page with :doc:`ERROR messages <Errors_messages>`
+Please also see the page with :doc:`Error messages <Errors_messages>`
 
 ----------
 
@@ -28,16 +32,10 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    cutoff is set too short or the angle has blown apart and an atom is
    too far away.
 
-*Angle style in data file differs from currently defined angle style*
-   Self-explanatory.
-
 *Angles are defined but no angle style is set*
    The topology contains angles, but there are no angle forces computed
    since there was no angle_style command.
 
-*Atom style in data file differs from currently defined atom style*
-   Self-explanatory.
-
 *Bond atom missing in box size check*
    The second atom needed to compute a particular bond is missing on this
    processor.  Typically this is because the pairwise cutoff is set too
@@ -53,9 +51,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    processor.  Typically this is because the pairwise cutoff is set too
    short or the bond has blown apart and an atom is too far away.
 
-*Bond style in data file differs from currently defined bond style*
-   Self-explanatory.
-
 *Bonds are defined but no bond style is set*
    The topology contains bonds, but there are no bond forces computed
    since there was no bond_style command.
@@ -68,9 +63,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    length, multiplying by the number of bonds in the interaction (e.g. 3
    for a dihedral) and adding a small amount of stretch.
 
-*Both groups in compute group/group have a net charge; the Kspace boundary correction to energy will be non-zero*
-   Self-explanatory.
-
 *Calling write_dump before a full system init.*
    The write_dump command is used before the system has been fully
    initialized as part of a 'run' or 'minimize' command. Not all dump
@@ -86,18 +78,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    This means the temperature associated with the rigid bodies may be
    incorrect on this timestep.
 
-*Cannot include log terms without 1/r terms; setting flagHI to 1*
-   Self-explanatory.
-
-*Cannot include log terms without 1/r terms; setting flagHI to 1.*
-   Self-explanatory.
-
-*Charges are set, but coulombic solver is not used*
-   Self-explanatory.
-
-*Charges did not converge at step %ld: %lg*
-   Self-explanatory.
-
 *Communication cutoff is 0.0. No ghost atoms will be generated. Atoms may get lost*
    The communication cutoff defaults to the maximum of what is inferred from
    pair and bond styles (will be zero, if none are defined) and what is specified
@@ -123,9 +103,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    is not changed automatically and the warning may be ignored depending
    on the specific system being simulated.
 
-*Communication cutoff is too small for SNAP micro load balancing, increased to %lf*
-   Self-explanatory.
-
 *Compute cna/atom cutoff may be too large to find ghost atom neighbors*
    The neighbor cutoff used may not encompass enough ghost atoms
    to perform this operation correctly.
@@ -158,9 +135,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    Conformation of the 4 listed dihedral atoms is extreme; you may want
    to check your simulation geometry.
 
-*Dihedral style in data file differs from currently defined dihedral style*
-   Self-explanatory.
-
 *Dihedrals are defined but no dihedral style is set*
    The topology contains dihedrals, but there are no dihedral forces computed
    since there was no dihedral_style command.
@@ -177,9 +151,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
 *Estimated error in splitting of dispersion coeffs is %g*
    Error is greater than 0.0001 percent.
 
-*Ewald/disp Newton solver failed, using old method to estimate g_ewald*
-   Self-explanatory. Choosing a different cutoff value may help.
-
 *FENE bond too long*
    A FENE bond has stretched dangerously far.  It's interaction strength
    will be truncated to attempt to prevent the bond from blowing up.
@@ -192,9 +163,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    A FENE bond has stretched dangerously far.  It's interaction strength
    will be truncated to attempt to prevent the bond from blowing up.
 
-*Fix halt condition for fix-id %s met on step %ld with value %g*
-   Self explanatory.
-
 *Fix SRD walls overlap but fix srd overlap not set*
    You likely want to set this in your input script.
 
@@ -238,21 +206,12 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
 *Fix property/atom mol or charge w/out ghost communication*
    A model typically needs these properties defined for ghost atoms.
 
-*Fix qeq CG convergence failed (%g) after %d iterations at %ld step*
-   Self-explanatory.
-
 *Fix qeq has non-zero lower Taper radius cutoff*
    Absolute value must be <= 0.01.
 
 *Fix qeq has very low Taper radius cutoff*
    Value should typically be >= 5.0.
 
-*Fix qeq/dynamic tolerance may be too small for damped dynamics*
-   Self-explanatory.
-
-*Fix qeq/fire tolerance may be too small for damped fires*
-   Self-explanatory.
-
 *Fix rattle should come after all other integration fixes*
    This fix is designed to work after all other integration fixes change
    atom positions.  Thus it should be the last integration fix specified.
@@ -285,9 +244,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    The user-specified force accuracy cannot be achieved unless the table
    feature is disabled by using 'pair_modify table 0'.
 
-*Geometric mixing assumed for 1/r\^6 coefficients*
-   Self-explanatory.
-
 *Group for fix_modify temp != fix group*
    The fix_modify command is specifying a temperature computation that
    computes a temperature on a different group of atoms than the fix
@@ -310,46 +266,14 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    Conformation of the 4 listed improper atoms is extreme; you may want
    to check your simulation geometry.
 
-*Improper style in data file differs from currently defined improper style*
-   Self-explanatory.
-
 *Impropers are defined but no improper style is set*
    The topology contains impropers, but there are no improper forces computed
    since there was no improper_style command.
 
-*Inconsistent image flags*
-   The image flags for a pair on bonded atoms appear to be inconsistent.
-   Inconsistent means that when the coordinates of the two atoms are
-   unwrapped using the image flags, the two atoms are far apart.
-   Specifically they are further apart than half a periodic box length.
-   Or they are more than a box length apart in a non-periodic dimension.
-   This is usually due to the initial data file not having correct image
-   flags for the two atoms in a bond that straddles a periodic boundary.
-   They should be different by 1 in that case.  This is a warning because
-   inconsistent image flags will not cause problems for dynamics or most
-   LAMMPS simulations.  However they can cause problems when such atoms
-   are used with the fix rigid or replicate commands.  Note that if you
-   have an infinite periodic crystal with bonds then it is impossible to
-   have fully consistent image flags, since some bonds will cross
-   periodic boundaries and connect two atoms with the same image
-   flag.
-
 *Increasing communication cutoff for GPU style*
    The pair style has increased the communication cutoff to be consistent with
    the communication cutoff requirements for this pair style when run on the GPU.
 
-*KIM Model does not provide 'energy'; Potential energy will be zero*
-   Self-explanatory.
-
-*KIM Model does not provide 'forces'; Forces will be zero*
-   Self-explanatory.
-
-*KIM Model does not provide 'particleEnergy'; energy per atom will be zero*
-   Self-explanatory.
-
-*KIM Model does not provide 'particleVirial'; virial per atom will be zero*
-   Self-explanatory.
-
 *Kspace_modify slab param < 2.0 may cause unphysical behavior*
    The kspace_modify slab parameter should be larger to ensure periodic
    grids padded with empty space do not overlap.
@@ -401,20 +325,10 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    box, or moved further than one processor's subdomain away before
    reneighboring.
 
-*MSM mesh too small, increasing to 2 points in each direction*
-   Self-explanatory.
-
 *Mismatch between velocity and compute groups*
    The temperature computation used by the velocity command will not be
    on the same group of atoms that velocities are being set for.
 
-*Mixing forced for lj coefficients*
-   Self-explanatory.
-
-*Molecule attributes do not match system attributes*
-   An attribute is specified (e.g. diameter, charge) that is
-   not defined for the specified atom style.
-
 *Molecule has bond topology but no special bond settings*
    This means the bonded atoms will not be excluded in pairwise
    interactions.
@@ -449,9 +363,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
 *More than one compute damage/atom*
    It is not efficient to use compute ke/atom more than once.
 
-*More than one compute dilatation/atom*
-   Self-explanatory.
-
 *More than one compute erotate/sphere/atom*
    It is not efficient to use compute erorate/sphere/atom more than once.
 
@@ -464,24 +375,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
 *More than one compute orientorder/atom*
    It is not efficient to use compute orientorder/atom more than once.
 
-*More than one compute plasticity/atom*
-   Self-explanatory.
-
-*More than one compute sna/atom*
-   Self-explanatory.
-
-*More than one compute sna/grid*
-   Self-explanatory.
-
-*More than one compute sna/grid/local*
-   Self-explanatory.
-
-*More than one compute snad/atom*
-   Self-explanatory.
-
-*More than one compute snav/atom*
-   Self-explanatory.
-
 *More than one fix poems*
    It is not efficient to use fix poems more than once.
 
@@ -557,21 +450,12 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
 *Pair COMB charge %.10f with force %.10f hit min barrier*
    Something is possibly wrong with your model.
 
-*Pair brownian needs newton pair on for momentum conservation*
-   Self-explanatory.
-
-*Pair dpd needs newton pair on for momentum conservation*
-   Self-explanatory.
-
 *Pair dsmc: num_of_collisions > number_of_A*
    Collision model in DSMC is breaking down.
 
 *Pair dsmc: num_of_collisions > number_of_B*
    Collision model in DSMC is breaking down.
 
-*Pair style in data file differs from currently defined pair style*
-   Self-explanatory.
-
 *Pair style restartinfo set but has no restart support*
    This pair style has a bug, where it does not support reading and
    writing information to a restart file, but does not set the member
@@ -681,9 +565,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    cluster specified by the fix shake command is numerically suspect.  LAMMPS
    will set it to 0.0 and continue.
 
-*Shell command '%s' failed with error '%s'*
-   Self-explanatory.
-
 *Shell command returned with non-zero status*
    This may indicate the shell command did not operate as expected.
 
@@ -694,15 +575,9 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    This will lead to invalid constraint forces in the SHAKE/RATTLE
    computation.
 
-*Simulations might be very slow because of large number of structure factors*
-   Self-explanatory.
-
 *Slab correction not needed for MSM*
    Slab correction is intended to be used with Ewald or PPPM and is not needed by MSM.
 
-*Specifying an 'subset' value of '0' is equivalent to no 'subset' keyword*
-   Self-explanatory.
-
 *System is not charge neutral, net charge = %g*
    The total charge on all atoms on the system is not 0.0.
    For some KSpace solvers this is only a warning.
@@ -734,9 +609,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    assumed to also be for all atoms.  Thus the pressure printed by thermo
    could be inaccurate.
 
-*The fix ave/spatial command has been replaced by the more flexible fix ave/chunk and compute chunk/atom commands -- fix ave/spatial will be removed in the summer of 2015*
-   Self-explanatory.
-
 *The minimizer does not re-orient dipoles when using fix efield*
    This means that only the atom coordinates will be minimized,
    not the orientation of the dipoles.
@@ -745,9 +617,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    More than the maximum # of neighbors was found multiple times.  This
    was unexpected.
 
-*Too many inner timesteps in fix ttm*
-   Self-explanatory.
-
 *Too many neighbors in CNA for %d atoms*
    More than the maximum # of neighbors was found multiple times.  This
    was unexpected.
@@ -775,24 +644,6 @@ Doc page with :doc:`ERROR messages <Errors_messages>`
    The deformation will heat the SRD particles so this can
    be dangerous.
 
-*Using kspace solver on system with no charge*
-   Self-explanatory.
-
-*Using largest cut-off for lj/long/dipole/long long long*
-   Self-explanatory.
-
-*Using largest cutoff for buck/long/coul/long*
-   Self-explanatory.
-
-*Using largest cutoff for lj/long/coul/long*
-   Self-explanatory.
-
-*Using largest cutoff for pair_style lj/long/tip4p/long*
-   Self-explanatory.
-
-*Using package gpu without any pair style defined*
-   Self-explanatory.
-
 *Using pair potential shift with pair_modify compute no*
    The shift effects will thus not be computed.
 

doc/src/Examples.rst

@@ -54,7 +54,7 @@ Lowercase directories
 +-------------+------------------------------------------------------------------+
 | body        | body particles, 2d system                                        |
 +-------------+------------------------------------------------------------------+
-| bpm         | BPM simulations of pouring elastic grains and plate impact       |
+| bpm         | simulations of solid elastic/plastic deformation and fracture    |
 +-------------+------------------------------------------------------------------+
 | cmap        | CMAP 5-body contributions to CHARMM force field                  |
 +-------------+------------------------------------------------------------------+

doc/src/Fortran.rst

@@ -1470,7 +1470,7 @@ Procedures Bound to the :f:type:`lammps` Derived Type
    LAMMPS equal style variable string, evaluates it and returns the resulting
    scalar value as a floating-point number.
 
-   .. versionadded:: TBD
+   .. versionadded:: 4Feb2025
 
    :p character(len=\*) expr: string to be evaluated
    :to: :cpp:func:`lammps_eval`
@@ -1482,7 +1482,7 @@ Procedures Bound to the :f:type:`lammps` Derived Type
 
    Clear whether a compute has been invoked
 
-   .. versionadded:: TBD
+   .. versionadded:: 4Feb2025
 
    :to: :cpp:func:`lammps_clearstep_compute`
 
@@ -1493,7 +1493,7 @@ Procedures Bound to the :f:type:`lammps` Derived Type
    Add timestep to list of future compute invocations
    if the compute has been invoked on the current timestep
 
-   .. versionadded:: TBD
+   .. versionadded:: 4Feb2025
 
    overloaded for 32-bit and 64-bit integer arguments
 
@@ -1506,7 +1506,7 @@ Procedures Bound to the :f:type:`lammps` Derived Type
 
    Add timestep to list of future compute invocations
 
-   .. versionadded:: TBD
+   .. versionadded:: 4Feb2025
 
    overloaded for 32-bit and 64-bit integer arguments
 
@@ -2773,8 +2773,7 @@ Procedures Bound to the :f:type:`lammps` Derived Type
         END SUBROUTINE external_callback
       END INTERFACE
 
-   where ``c_bigint`` is ``c_int`` if ``-DLAMMPS_SMALLSMALL`` was used and
+   where ``c_bigint`` is ``c_int64_t`` and ``c_tagint`` is ``c_int64_t`` if
-   ``c_int64_t`` otherwise; and ``c_tagint`` is ``c_int64_t`` if
    ``-DLAMMPS_BIGBIG`` was used and ``c_int`` otherwise.
 
    The argument *caller* to :f:subr:`set_fix_external_callback` is unlimited

doc/src/Howto.rst

@@ -40,6 +40,7 @@ Settings howto
    Howto_walls
    Howto_nemd
    Howto_dispersion
+   Howto_bulk2slab
 
 Analysis howto
 ==============

doc/src/Howto_bpm.rst

@@ -42,12 +42,14 @@ such as those created by pouring grains using :doc:`fix pour
 
 ----------
 
-Currently, there are two types of bonds included in the BPM package. The
+Currently, there are three types of bonds included in the BPM package. The
 first bond style, :doc:`bond bpm/spring <bond_bpm_spring>`, only applies
 pairwise, central body forces. Point particles must have :doc:`bond atom
 style <atom_style>` and may be thought of as nodes in a spring
 network. An optional multibody term can be used to adjust the network's
-Poisson's ratio. Alternatively, the second bond style, :doc:`bond bpm/rotational
+Poisson's ratio. The :doc:`bpm/spring/plastic <bond_bpm_spring_plastic>`
+bond style is similar except it adds a plastic yield strain.
+Alternatively, the third bond style, :doc:`bond bpm/rotational
 <bond_bpm_rotational>`, resolves tangential forces and torques arising
 with the shearing, bending, and twisting of the bond due to rotation or
 displacement of particles.  Particles are similar to those used in the

doc/src/Howto_bulk2slab.rst

@@ -0,0 +1,160 @@
+===========================
+Convert bulk system to slab
+===========================
+
+A regularly encountered simulation problem is how to convert a bulk
+system that has been run for a while to equilibrate into a slab system
+with some vacuum space and free surfaces.  The challenge here is that
+one cannot just change the box dimensions with the :doc:`change_box
+command <change_box>` or edit the box boundaries in a data file because
+some atoms will have non-zero image flags from diffusing around.
+
+Changing the box dimensions results in an undesired displacement of
+those atoms, since the image flags indicate how many times the box
+length in x-, y-, or z-direction needs to be added or subtracted to get
+the "unwrapped" coordinates.  By changing the box dimension this
+distance is changed and thus those atoms move unphysically relative to
+their neighbors with zero image flags.  Setting image flags forcibly to
+zero creates problems because that could break apart molecules by having
+one atom of a bond on the top of the system and the other at the bottom.
+
+.. _bulk2slab:
+.. figure:: JPG/rhodo-both.jpg
+   :figwidth: 80%
+   :figclass: align-center
+
+   Snapshots of the bulk Rhodopsin in lipid layer and water system (right)
+   and the generated slab geometry (left)
+
+.. admonition:: Disclaimer
+   :class: note
+
+   The following workflow will work for many bulk systems, but not all.
+   Some systems cannot be converted (e.g. polymers with bonds to the
+   same molecule across periodic boundaries, sometimes called "infinite
+   polymers").  The amount of vacuum that needs to be added depends on
+   the length of the molecules where the system is split (the example
+   here splits where there is water with short molecules).  In some
+   cases, the system may need to be re-centered in the box first using
+   the :doc:`displace_atoms command <displace_atoms>`.  Also, the time
+   spent on strong thermalization and equilibration will depend on the
+   specific system and its thermodynamic conditions.
+
+Below is a suggested workflow using the :doc:`Rhodopsin benchmark input
+<Speed_bench>` for demonstration.  The figure shows the state *before*
+the procedure on the left (with unwrapped atoms that have diffused out
+of the box) and *after* on the right (with the vacuum added above and
+below).  The procedure is implemented by modifying a copy of the
+``in.rhodo`` input file.  The first lines up to and including the
+:doc:`read_data command <read_data>` remain unchanged.  Then we insert
+the following lines to add vacuum to the z direction above and below the
+system:
+
+.. code-block:: LAMMPS
+
+   variable       delta index 10.0
+   reset_atoms    image all
+   write_dump     all custom rhodo-unwrap.lammpstrj id xu yu zu
+   change_box     all z final $(zlo-2.0*v_delta) $(zhi+2.0*v_delta) &
+                      boundary p p f
+   read_dump      rhodo-unwrap.lammpstrj 0 x y z box no replace yes
+   kspace_modify  slab 3.0
+
+Specifically, the :doc:`variable delta <variable>` (set to 10.0)
+represents a distance that determines the amount of vacuum added: we add
+twice its value in each direction to the z-dimension; thus in total
+:math:`40 \AA` get added.  The :doc:`reset_atoms image all
+<reset_atoms>` command shall reset any image flags to become either 0 or
+:math:`\pm 1` and thus have the minimum distance from the center of the
+simulation box, but the correct relative distance for bonded atoms.
+
+The :doc:`write_dump command <write_dump>` then writes out the resulting
+*unwrapped* coordinates of the system.  After expanding the box,
+coordinates that were outside the box should now be inside and the
+unwrapped coordinates will become "wrapped", while atoms outside the
+periodic boundaries will be wrapped back into the box and their image
+flags in those directions restored.
+
+The :doc:`change_box command <change_box>` adds the desired
+distance to the low and high box boundary in z-direction and then changes
+the :doc:`boundary to "p p f" <boundary>` which will force the image
+flags in z-direction to zero and create an undesired displacement for
+the atoms with non-zero image flags.
+
+With the :doc:`read_dump command <read_dump>` we read back and replace
+partially incorrect coordinates with the previously saved, unwrapped
+coordinates.  It is important to ignore the box dimensions stored in the
+dump file.  We want to preserve the expanded box.  Finally, we turn on
+the slab correction for the PPPM long-range solver with the
+:doc:`kspace_modify command <kspace_modify>` as required when using a
+long range Coulomb solver for non-periodic z-dimension.
+
+Next we replace the :doc:`fix npt command <fix_nh>` with:
+
+.. code-block:: LAMMPS
+
+   fix            2 nvt temp 300.0 300.0 10.0
+
+We now have an open system and thus the adjustment of the cell in
+z-direction is no longer required.  Since splitting the bulk water
+region where the vacuum is inserted, creates surface atoms with high
+potential energy, we reduce the thermostat time constant from 100.0 to
+10.0 to remove excess kinetic energy resulting from that change faster.
+
+Also the high potential energy of the surface atoms can cause that some
+of them are ejected from the slab.  In order to suppress that, we add
+soft harmonic walls to push back any atoms that want to leave the slab.
+To determine the position of the wall, we first need to to determine the
+extent of the atoms in z-direction and then place the harmonic walls
+based on that information:
+
+.. code-block:: LAMMPS
+
+   compute         zmin all reduce min z
+   compute         zmax all reduce max z
+   thermo_style    custom zlo c_zmin zhi c_zmax
+   run             0 post no
+   fix             3 all wall/harmonic zhi $(c_zmax+v_delta) 10.0 0.0 ${delta} &
+                                       zlo $(c_zmin-v_delta) 10.0 0.0 ${delta}
+
+The two :doc:`compute reduce <compute_reduce>` command determine the
+minimum and maximum z-coordinate across all atoms.  In order to trigger
+the execution of the compute commands we need to "consume" them.  This
+is done with the :doc:`thermo_style custom <thermo_style>` command
+followed by the :doc:`run 0 <run>` command.  This avoids and error
+accessing the min/max values determined by the compute commands to
+compute the location of the wall in lower and upper direction.  This
+uses the previously defined *delta* variable to determine the distance
+of the wall from the extent of the system and the cutoff for the wall
+interaction.  This way only atoms that move beyond the min/max values in
+z-direction will experience a restoring force, nudging them back to the
+slab.  The force constant of :math:`10.0 \frac{\mathrm{kcal/mol}}{\AA}`
+was determined empirically.
+
+Adding these "restoring" soft walls assist in making the free surfaces
+above and below the slab flat, instead of having rugged or ondulated
+surfaces.  The impact of the walls can be changed by adjusting the force
+constant, cutoff, and position of the wall.
+
+Finally, we replace the :doc:`run 100 <run>` of the original input with:
+
+.. code-block:: LAMMPS
+
+   run             1000 post no
+
+   unfix           3
+   fix             2 all nvt temp 300.0 300.0 100.0
+   run             1000 post no
+
+   write_data      data.rhodo-slab
+
+This runs the system converted to a slab first for 1000 MD steps using
+the walls and stronger Nose-Hoover thermostat.  Then the walls are
+removed with :doc:`unfix 3 <unfix>` and the thermostat time constant
+reset to 100.0 and the system run for another 1000 steps.  Finally the
+resulting slab geometry is written to a new data file
+``data.rhodo-slab`` with a :doc:`write_data command <write_data>`.  The
+number of MD steps required to reach a proper equilibrium state is very
+likely larger.  The number of 1000 steps (corresponding to 2
+picoseconds) was chosen for demonstration purposes, so that the
+procedure can be easily and quickly tested.

doc/src/Howto_github.rst

@@ -487,10 +487,10 @@ updates are back-ported from the *develop* branch to the *maintenance*
 branch and occasionally merged to *stable* as an update release.
 
 Furthermore, the naming of the release tags now follow the pattern
-"patch_<Day><Month><Year>" to simplify comparisons between releases.
+"patch\_<Day><Month><Year>" to simplify comparisons between releases.
-For stable releases additional "stable_<Day><Month><Year>" tags are
+For stable releases additional "stable\_<Day><Month><Year>" tags are
 applied and update releases are tagged with
-"stable_<Day><Month><Year>_update<Number>", Finally, all releases and
+"stable\_<Day><Month><Year>\_update<Number>", Finally, all releases and
 submissions are subject to automatic testing and code checks to make
 sure they compile with a variety of compilers and popular operating
 systems.  Some unit and regression testing is applied as well.

doc/src/Howto_moltemplate.rst

@@ -2,14 +2,18 @@ Moltemplate Tutorial
 ====================
 
 In this tutorial, we are going to use the tool :ref:`Moltemplate
-<moltemplate>` to set up a classical molecular dynamic simulation using
+<Moltemplate1>` from https://moltemplate.org/ to set up a classical
-the :ref:`OPLS-AA force field <OPLSAA96>`. The first
+molecular dynamic simulation using the :ref:`OPLS-AA force field
-task is to describe an organic compound and create a complete input deck
+<oplsaa2024>`. The first task is to describe an organic compound and
-for LAMMPS. The second task is to map the OPLS-AA force field to a
+create a complete input deck for LAMMPS.  The second task is to use
-molecular sample created with an external tool, e.g. PACKMOL, and
+moltemplate to build a polymer.  The third task is to map the OPLS-AA
-exported as a PDB file.  The files used in this tutorial can be found
+force field to a molecular sample created with an external tool,
-in the ``tools/moltemplate/tutorial-files`` folder of the LAMMPS
+e.g. PACKMOL, and exported as a PDB file.  The files used in this
-source code distribution.
+tutorial can be found in the ``tools/moltemplate/tutorial-files`` folder
+of the LAMMPS source code distribution.
+
+Many more examples can be found here: https://moltemplate.org/examples.html
+
 
 Simulating an organic solvent
 """""""""""""""""""""""""""""
@@ -17,14 +21,13 @@ Simulating an organic solvent
 This example aims to create a cubic box of the organic solvent
 formamide.
 
-The first step is to create a molecular topology in the
+The first step is to create a molecular topology in the LAMMPS-template
-LAMMPS-template (LT) file format representing a single molecule, which
+(LT) file format representing a single molecule, which will be
-will be stored in a Moltemplate object called ``_FAM inherits OPLSAA {}``.
+stored in a Moltemplate object called ``_FAM inherits OPLSAA {}``.
 This command states that the object ``_FAM`` is based on an existing
 object called ``OPLSAA``, which contains OPLS-AA parameters, atom type
 definitions, partial charges, masses and bond-angle rules for many organic
 and biological compounds.
-
 The atomic structure is the starting point to populate the command
 ``write('Data Atoms') {}``, which will write the ``Atoms`` section in the
 LAMMPS data file. The OPLS-AA force field uses the ``atom_style full``,
@@ -36,21 +39,23 @@ to the ``molID``, except that the same variable is used for the whole
 molecule. The atom types are assigned using ``@``-type variables. The
 assignment of atom types (e.g. ``@atom:177``, ``@atom:178``) is done using
 the OPLS-AA atom types defined in the "In Charges" section of the file
-``oplsaa.lt``, looking for a reasonable match with the description of the atom.
+``oplsaa2024.lt``, looking for a reasonable match with the description of the atom.
 The resulting file (``formamide.lt``) follows:
 
 .. code-block:: bash
 
+   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt  # defines OPLSAA
+
    _FAM inherits OPLSAA {
 
      # atomID    molID  atomType  charge  coordX  coordY  coordZ
      write('Data Atoms') {
-       $atom:C00 $mol   @atom:177  0.00    0.100   0.490   0.0
+       $atom:C00  $mol  @atom:235  0.00    0.100   0.490   0.0
-       $atom:O01 $mol   @atom:178  0.00    1.091  -0.250   0.0
+       $atom:O01  $mol  @atom:236  0.00    1.091  -0.250   0.0
-       $atom:N02 $mol   @atom:179  0.00   -1.121  -0.181   0.0
+       $atom:N02  $mol  @atom:237  0.00   -1.121  -0.181   0.0
-       $atom:H03 $mol   @atom:182  0.00   -2.013   0.272   0.0
+       $atom:H03  $mol  @atom:240  0.00   -2.013   0.272   0.0
-       $atom:H04 $mol   @atom:182  0.00   -1.056  -1.190   0.0
+       $atom:H04  $mol  @atom:240  0.00   -1.056  -1.190   0.0
-       $atom:H05 $mol   @atom:221  0.00    0.144   1.570   0.0
+       $atom:H05  $mol  @atom:279  0.00    0.144   1.570   0.0
      }
 
      # A list of the bonds in the molecule:
@@ -64,16 +69,17 @@ The resulting file (``formamide.lt``) follows:
      }
    }
 
-You don't have to specify the charge in this example because they will
+You don't have to specify the charge in this example because the OPLSAA
-be assigned according to the atom type. Analogously, only a
+force-field assigns charge according to the atom type.  (This is not true
-"Data Bond List" section is needed as the atom type will determine the
+when using other force fields.)  A "Data Bond List" section is needed as
-bond type. The other bonded interactions (e.g. angles,
+the atom type will determine the bond type. The other bonded interactions
-dihedrals, and impropers) will be automatically generated by
+(e.g. angles, dihedrals, and impropers) will be automatically generated by
 Moltemplate.
 
-If the simulation is non-neutral, or Moltemplate complains that you have
+If the simulation is not charge-neutral, or Moltemplate complains that
-missing bond, angle, or dihedral types, this means at least one of your
+you have missing bond, angle, or dihedral types, this probably means that
-atom types is incorrect.
+at least one of your atom types is incorrect (or that perhaps there is no
+suitable atom type currently defined in the ``oplsaa2024.lt`` file).
 
 The second step is to create a master file with instructions to build a
 starting structure and the LAMMPS commands to run an NPT simulation. The
@@ -81,11 +87,9 @@ master file (``solv_01.lt``) follows:
 
 .. code-block:: bash
 
-   # Import the force field.
+   import formamide.lt  # Defines "_FAM" and OPLSAA
-   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa.lt
-   import formamide.lt # after oplsaa.lt, as it depends on it.
 
-   # Create the input sample.
+   # Distribute the molecules on a 5x5x5 cubic grid with spacing 4.6
    solv = new _FAM [5].move( 4.6, 0, 0)
                    [5].move( 0, 4.6, 0)
                    [5].move( 0, 0, 4.6)
@@ -98,8 +102,11 @@ master file (``solv_01.lt``) follows:
     -11.5 11.5 zlo zhi
    }
 
-   # Create an input deck for LAMMPS.
+   # Note: The lines below in the "In Run" section are often omitted.
-   write_once("In Init"){
+
+   write_once("In Run"){
+    # Create an input deck for LAMMPS.
+    # Run an NPT simulation.
     # Input variables.
     variable run    string solv_01   # output name
     variable ts     equal  1         # timestep
@@ -109,12 +116,6 @@ master file (``solv_01.lt``) follows:
     variable equi   equal  5000      # Equilibration steps
     variable prod   equal  30000     # Production steps
 
-    # PBC (set them before the creation of the box).
-    boundary p p p
-   }
-
-   # Run an NPT simulation.
-   write_once("In Run"){
     # Derived variables.
     variable tcouple equal \$\{ts\}*100
     variable pcouple equal \$\{ts\}*1000
@@ -143,7 +144,7 @@ master file (``solv_01.lt``) follows:
     unfix NPT
    }
 
-The first two commands insert the content of files ``oplsaa.lt`` and
+The first two commands insert the content of files ``oplsaa2024.lt`` and
 ``formamide.lt`` into the master file. At this point, we can use the
 command ``solv = new _FAM [N]`` to create N copies of a molecule of type
 ``_FAM``. In this case, we create an array of 5*5*5 molecules on a cubic
@@ -153,21 +154,37 @@ the sample was created from scratch, we also specify the simulation box
 size in the "Data Boundary" section.
 
 The LAMMPS setting for the force field are specified in the file
-``oplsaa.lt`` and are written automatically in the input deck. We also
+``oplsaa2024.lt`` and are written automatically in the input deck. We also
 specify the boundary conditions and a set of variables in
-the "In Init" section. The remaining commands to run an NPT simulation
+the "In Init" section.
+
+The remaining commands to run an NPT simulation
 are written in the "In Run" section. Note that in this script, LAMMPS
 variables are protected with the escape character ``\`` to distinguish
 them from Moltemplate variables, e.g. ``\$\{run\}`` is a LAMMPS
 variable that is written in the input deck as ``${run}``.
 
+(Note: Moltemplate can be slow to run, so you need to change you run
+settings frequently, I recommended moving those commands (from "In Run")
+out of your .lt files and into a separate file.  Moltemplate creates a
+file named ``run.in.EXAMPLE`` for this purpose.  You can put your run
+settings and fixes that file and then invoke LAMMPS using
+``mpirun -np 4 lmp -in run.in.EXAMPLE`` instead.)
+
+
 Compile the master file with:
 
 .. code-block:: bash
 
-   moltemplate.sh -overlay-all solv_01.lt
+   moltemplate.sh solv_01.lt
+   cleanup_moltemplate.sh   # <-- optional: see below
 
-And execute the simulation with the following:
+(Note: The optional "cleanup_moltemplate.sh" command deletes
+unused atom types, which sometimes makes LAMMPS run faster.
+But it does not work with many-body pair styles or dreiding-style h-bonds.
+Fortunately most force fields, including OPLSAA, don't use those features.)
+
+Then execute the simulation with the following:
 
 .. code-block:: bash
 
@@ -180,15 +197,116 @@ And execute the simulation with the following:
    Snapshot of the sample at the beginning and end of the simulation.
    Rendered with Ovito.
 
+
+Building a simple polymer
+"""""""""""""""""""""""""
+Moltemplate is particularly useful for building polymers (and other molecules
+with sub-units).  As an simple example, consider butane:
+
+.. figure:: JPG/butane.jpg
+
+The ``butane.lt`` file below defines Butane as a polymer containing
+4 monomers (of type ``CH3``, ``CH2``, ``CH2``, ``CH3``).
+
+.. code-block:: bash
+
+   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt  # defines OPLSAA
+
+   CH3 inherits OPLSAA {
+
+     # atomID    molID   atomType  charge   coordX   coordY    coordZ
+     write("Data Atoms") {
+       $atom:c  $mol:... @atom:54   0.0   0.000000  0.4431163  0.000000
+       $atom:h1 $mol:... @atom:60   0.0   0.000000  1.0741603  0.892431
+       $atom:h2 $mol:... @atom:60   0.0   0.000000  1.0741603 -0.892431
+       $atom:h3 $mol:... @atom:60   0.0  -0.892431 -0.1879277  0.000000
+     }
+     # (Using "$mol:..." indicates this object ("CH3") is part of a larger
+     #  molecule. Moltemplate will share the molecule-ID with that molecule.)
+
+     # A list of the bonds within the "CH3" molecular sub-unit:
+     # BondID   AtomID1   AtomID2
+     write('Data Bond List') {
+       $bond:ch1 $atom:c $atom:h1
+       $bond:ch2 $atom:c $atom:h2
+       $bond:ch3 $atom:c $atom:h3
+     }
+   }
+
+   CH2 inherits OPLSAA {
+
+     # atomID    molID   atomType  charge   coordX   coordY    coordZ
+     write("Data Atoms") {
+       $atom:c  $mol:... @atom:57   0.0   0.000000  0.4431163  0.000000
+       $atom:h1 $mol:... @atom:60   0.0   0.000000  1.0741603  0.892431
+       $atom:h2 $mol:... @atom:60   0.0   0.000000  1.0741603 -0.892431
+     }
+
+     # A list of the bonds within the "CH2" molecular sub-unit:
+     # BondID   AtomID1   AtomID2
+     write('Data Bond List') {
+       $bond:ch1 $atom:c $atom:h1
+       $bond:ch2 $atom:c $atom:h2
+     }
+   }
+
+   Butane inherits OPLSAA {
+
+     create_var {$mol}  # optional:force all monomers to share the same molecule-ID
+
+     # - Create 4 monomers
+     # - Move them along the X axis using ".move()",
+     # - Rotate them 180 degrees with respect to the previous monomer
+     monomer1 = new CH3
+     monomer2 = new CH2.rot(180,1,0,0).move(1.2533223,0,0)
+     monomer3 = new CH2.move(2.5066446,0,0)
+     monomer4 = new CH3.rot(180,0,0,1).move(3.7599669,0,0)
+
+     # A list of the bonds connecting different monomers together:
+     write('Data Bond List') {
+       $bond:b1  $atom:monomer1/c $atom:monomer2/c
+       $bond:b2  $atom:monomer2/c $atom:monomer3/c
+       $bond:b3  $atom:monomer3/c $atom:monomer4/c
+     }
+   }
+
+Again, you don't have to specify the charge in this example because OPLSAA
+assigns charges according to the atom type.
+
+This ``Butane`` object is a molecule which can be used anywhere other molecules
+can be used.  (You can arrange ``Butane`` molecules on a lattice, as we did previously.
+You can also modify individual butane molecules by adding or deleting atoms or bonds.
+You can add bonds between specific butane molecules or use ``Butane`` as a
+subunit to define even larger molecules.  See the moltemplate manual for details.)
+
+
+
+
+
+
+How to build a complex polymer
+""""""""""""""""""""""""""""""""""""""""""
+A similar procedure can be used to create more complicated polymers,
+such as the NIPAM polymer example shown below.  For details, see:
+
+https://github.com/jewettaij/moltemplate/tree/master/examples/all_atom/force_field_OPLSAA/NIPAM_polymer+water+ions
+
+
+
+
 Mapping an existing structure
 """""""""""""""""""""""""""""
 
 Another helpful way to use Moltemplate is mapping an existing molecular
-sample to a force field. This is useful when a complex sample is
+sample to a force field. This is useful when a complex sample is assembled
-assembled from different simulations or created with specialized
+from different simulations or created with specialized software (e.g. PACKMOL).
-software (e.g. PACKMOL). As in the previous example, all molecular
+(Note: The previous link shows how to build this entire system from scratch
-species in the sample must be defined using single-molecule Moltemplate
+using only moltemplate.  However here we will assume instead that we obtained
-objects.  For this example, we use a short polymer in a box containing
+a PDB file for this system using PACKMOL.)
+
+As in the previous examples, all molecular species in the sample
+are defined using single-molecule Moltemplate objects.
+For this example, we use a short polymer in a box containing
 water molecules and ions in the PDB file ``model.pdb``.
 
 It is essential to understand that the order of atoms in the PDB file
@@ -246,25 +364,25 @@ The resulting master LT file defining short annealing at a fixed volume
 .. code-block:: bash
 
    # Use the OPLS-AA force field for all species.
-   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa.lt
+   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt
    import PolyNIPAM.lt
 
    # Define the SPC water and ions as in the OPLS-AA
    Ca inherits OPLSAA {
      write("Data Atoms"){
-       $atom:a1  $mol:. @atom:354 0.0  0.00000 0.00000 0.000000
+       $atom:a1  $mol:. @atom:412 0.0  0.00000 0.00000 0.000000
      }
    }
    Cl inherits OPLSAA {
      write("Data Atoms"){
-       $atom:a1  $mol:. @atom:344 0.0  0.00000 0.00000 0.000000
+       $atom:a1  $mol:. @atom:401 0.0  0.00000 0.00000 0.000000
      }
    }
    SPC inherits OPLSAA {
      write("Data Atoms"){
-       $atom:O  $mol:. @atom:76 0.  0.0000000 0.00000 0.000000
+       $atom:O  $mol:. @atom:9991 0.  0.0000000 0.00000 0.0000000
-       $atom:H1 $mol:. @atom:77 0.  0.8164904 0.00000 0.5773590
+       $atom:H1 $mol:. @atom:9990 0.  0.8164904 0.00000 0.5773590
-       $atom:H2 $mol:. @atom:77 0. -0.8164904 0.00000 0.5773590
+       $atom:H2 $mol:. @atom:9990 0. -0.8164904 0.00000 0.5773590
      }
      write("Data Bond List") {
        $bond:OH1 $atom:O $atom:H1
@@ -285,8 +403,15 @@ The resulting master LT file defining short annealing at a fixed volume
      0 26 zlo zhi
    }
 
-   # Define the input variables.
    write_once("In Init"){
+     boundary p p p  # "p p p" is the default. This line is optional.
+     neighbor 3 bin  # (This line is also optional in this example.)
+   }
+
+   # Note: The lines below in the "In Run" section are often omitted.
+
+   # Run an NVT simulation.
+   write_once("In Run"){
      # Input variables.
      variable run    string sample01  # output name
      variable ts     equal  2         # timestep
@@ -294,13 +419,6 @@ The resulting master LT file defining short annealing at a fixed volume
      variable p      equal  1.        # equilibrium pressure
      variable equi   equal  30000     # equilibration steps
 
-     # PBC (set them before the creation of the box).
-     boundary p p p
-     neighbor        3 bin
-   }
-
-   # Run an NVT simulation.
-   write_once("In Run"){
      # Set the output.
      thermo          1000
      thermo_style    custom step etotal evdwl ecoul elong ebond eangle &
@@ -314,8 +432,8 @@ The resulting master LT file defining short annealing at a fixed volume
      write_data \$\{run\}.min
 
      # Set the constrains.
-     group watergroup type @atom:76 @atom:77
+     group watergroup type @atom:9991 @atom:9990
-     fix 0 watergroup shake 0.0001 10 0 b @bond:042_043 a @angle:043_042_043
+     fix 0 watergroup shake 0.0001 10 0 b @bond:spcO_spcH a @angle:spcH_spcO_spcH
 
      # Short annealing.
      timestep        \$\{ts\}
@@ -327,7 +445,7 @@ The resulting master LT file defining short annealing at a fixed volume
 
 
 In this example, the water model is SPC and it is defined in the
-``oplsaa.lt`` file with atom types ``@atom:76`` and ``@atom:77``.  For
+``oplsaa2024.lt`` file with atom types ``@atom:9991`` and ``@atom:9990``.  For
 water we also use the ``group`` and ``fix shake`` commands with
 Moltemplate ``@``-type variables, to ensure consistency with the
 numerical values assigned during compilation. To identify the bond and
@@ -336,19 +454,20 @@ are:
 
 .. code-block:: bash
 
-   replace{ @atom:76 @atom:76_b042_a042_d042_i042 }
+   replace{ @atom:9991 @atom:9991_bspcO_aspcO_dspcO_ispcO }
-   replace{ @atom:77 @atom:77_b043_a043_d043_i043 }
+   replace{ @atom:9990 @atom:9990_bspcH_aspcH_dspcH_ispcH }
 
 From which we can identify the following "Data Bonds By Type":
-``@bond:042_043 @atom:*_b042*_a*_d*_i* @atom:*_b043*_a*_d*_i*`` and
+``@bond:spcO_spcH @atom:*_bspcO*_a*_d*_i* @atom:*_bspcH*_a*_d*_i*``
-"Data Angles By Type": ``@angle:043_042_043 @atom:*_b*_a043*_d*_i*
+and "Data Angles By Type":
-@atom:*_b*_a042*_d*_i* @atom:*_b*_a043*_d*_i*``
+``@angle:spcH_spcO_spcH @atom:*_b*_aspcH*_d*_i* @atom:*_b*_aspcO*_d*_i* @atom:*_b*_aspcH*_d*_i*``
 
 Compile the master file with:
 
 .. code-block:: bash
 
-   moltemplate.sh -overlay-all -pdb model.pdb sample01.lt
+   moltemplate.sh -pdb model.pdb sample01.lt
+   cleanup_moltemplate.sh
 
 And execute the simulation with the following:
 
@@ -363,8 +482,13 @@ And execute the simulation with the following:
    Sample visualized with Ovito loading the trajectory into the DATA
    file written after minimization.
 
+
 ------------
 
-.. _OPLSAA96:
+.. _oplsaa2024:
 
-**(OPLS-AA)**  Jorgensen, Maxwell, Tirado-Rives, J Am Chem Soc, 118(45), 11225-11236 (1996).
+**(OPLS-AA)**  Jorgensen, W.L., Ghahremanpour, M.M., Saar, A., Tirado-Rives, J., J. Phys. Chem. B, 128(1), 250-262 (2024).
+
+.. _Moltemplate1:
+
+**(Moltemplate)**  Jewett et al., J. Mol. Biol., 433(11), 166841 (2021)

doc/src/Howto_peri.rst

@@ -197,7 +197,7 @@ The LPS model has a force scalar state
 .. math::
 
    \underline{t} = \frac{3K\theta}{m}\underline{\omega}\,\underline{x} +
-   \alpha \underline{\omega}\,\underline{e}^{\rm d}, \qquad\qquad\textrm{(3)}
+   \alpha \underline{\omega}\,\underline{e}^\mathrm{d}, \qquad\qquad\textrm{(3)}
 
 with :math:`K` the bulk modulus and :math:`\alpha` related to the shear
 modulus :math:`G` as
@@ -242,14 +242,14 @@ scalar state are defined, respectively, as
 
 .. math::
 
-   \underline{e}^{\rm i}=\frac{\theta \underline{x}}{3}, \qquad
+   \underline{e}^\mathrm{i}=\frac{\theta \underline{x}}{3}, \qquad
-   \underline{e}^{\rm d} = \underline{e}- \underline{e}^{\rm i},
+   \underline{e}^\mathrm{d} = \underline{e}- \underline{e}^\mathrm{i},
 
 
 where the arguments of the state functions and the vectors on which they
 operate are omitted for simplicity. We note that the LPS model is linear
 in the dilatation :math:`\theta`, and in the deviatoric part of the
-extension :math:`\underline{e}^{\rm d}`.
+extension :math:`\underline{e}^\mathrm{d}`.
 
 .. note::
 

doc/src/Howto_python.rst

@@ -62,17 +62,17 @@ with :ref:`PNG, JPEG and FFMPEG output support <graphics>` enabled.
 
          cd $LAMMPS_DIR/src
 
-         # add packages if necessary
+         # add LAMMPS packages if necessary
          make yes-MOLECULE
          make yes-PYTHON
 
          # compile shared library using Makefile
          make mpi mode=shlib LMP_INC="-DLAMMPS_PNG -DLAMMPS_JPEG -DLAMMPS_FFMPEG" JPG_LIB="-lpng -ljpeg"
 
-Step 2: Installing the LAMMPS Python package
+Step 2: Installing the LAMMPS Python module
-""""""""""""""""""""""""""""""""""""""""""""
+"""""""""""""""""""""""""""""""""""""""""""
 
-Next install the LAMMPS Python package into your current Python installation with:
+Next install the LAMMPS Python module into your current Python installation with:
 
 .. code-block:: bash
 
@@ -89,6 +89,29 @@ privileges) or into your personal Python module folder.
    Recompiling the shared library requires re-installing the Python
    package.
 
+.. _externally_managed:
+
+.. admonition:: Handling an "externally-managed-environment" Error
+   :class: Hint
+
+   Some Python installations made through Linux distributions
+   (e.g. Ubuntu 24.04LTS or later) will prevent installing the LAMMPS
+   Python module into a system folder or a corresponding folder of the
+   individual user as attempted by ``make install-python`` with an error
+   stating that an *externally managed* python installation must be only
+   managed by the same package package management tool.  This is an
+   optional setting, so not all Linux distributions follow it currently
+   (Spring 2025).  The reasoning and explanations for this error can be
+   found in the `Python Packaging User Guide
+   <https://packaging.python.org/en/latest/specifications/externally-managed-environments/>`_
+
+   These guidelines suggest to create a virtual environment and install
+   the LAMMPS Python module there (see below).  This is generally a good
+   idea and the LAMMPS developers recommend this, too.  If, however, you
+   want to proceed and install the LAMMPS Python module regardless, you
+   can install the "wheel" file (see above) manually with the ``pip``
+   command by adding the ``--break-system-packages`` flag.
+
 Installation inside of a virtual environment
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

doc/src/Howto_triclinic.rst

@@ -249,23 +249,23 @@ as follows:
 
 .. math::
 
-  a   = & {\rm lx} \\
+  a   = & \mathrm{lx} \\
-  b^2 = &  {\rm ly}^2 +  {\rm xy}^2 \\
+  b^2 = &  \mathrm{ly}^2 + \mathrm{xy}^2 \\
-  c^2 = &  {\rm lz}^2 +  {\rm xz}^2 +  {\rm yz}^2 \\
+  c^2 = &  \mathrm{lz}^2 + \mathrm{xz}^2 + \mathrm{yz}^2 \\
-  \cos{\alpha} = & \frac{{\rm xy}*{\rm xz} + {\rm ly}*{\rm yz}}{b*c} \\
+  \cos{\alpha} = & \frac{\mathrm{xy}*\mathrm{xz} + \mathrm{ly}*\mathrm{yz}}{b*c} \\
-  \cos{\beta}  = & \frac{\rm xz}{c} \\
+  \cos{\beta}  = & \frac{\mathrm{xz}}{c} \\
-  \cos{\gamma} = & \frac{\rm xy}{b} \\
+  \cos{\gamma} = & \frac{\mathrm{xy}}{b} \\
 
 The inverse relationship can be written as follows:
 
 .. math::
 
-  {\rm lx}   = & a \\
+  \mathrm{lx}   = & a \\
-  {\rm xy}   = & b \cos{\gamma}  \\
+  \mathrm{xy}   = & b \cos{\gamma}  \\
-  {\rm xz}   = & c \cos{\beta}\\
+  \mathrm{xz}   = & c \cos{\beta}\\
-  {\rm ly}^2 = & b^2 - {\rm xy}^2 \\
+  \mathrm{ly}^2 = & b^2 - \mathrm{xy}^2 \\
-  {\rm yz}   = & \frac{b*c \cos{\alpha} - {\rm xy}*{\rm xz}}{\rm ly} \\
+  \mathrm{yz}   = & \frac{b*c \cos{\alpha} - \mathrm{xy}*\mathrm{xz}}{\mathrm{ly}} \\
-  {\rm lz}^2 = & c^2 - {\rm xz}^2 - {\rm yz}^2 \\
+  \mathrm{lz}^2 = & c^2 - \mathrm{xz}^2 - \mathrm{yz}^2 \\
 
 The values of *a*, *b*, *c*, :math:`\alpha` , :math:`\beta`, and
 :math:`\gamma` can be printed out or accessed by computes using the

doc/src/Install_mac.rst

@@ -5,8 +5,7 @@ LAMMPS can be downloaded, built, and configured for macOS with `Homebrew
 <homebrew_>`_.  (Alternatively, see the installation instructions for
 :doc:`downloading an executable via Conda <Install_conda>`.)  The
 following LAMMPS packages are unavailable at this time because of
-additional requirements not yet met: GPU, KOKKOS, MSCG, POEMS,
+additional requirements not yet met: GPU, KOKKOS.
-VORONOI.
 
 After installing Homebrew, you can install LAMMPS on your system with
 the following commands:

doc/src/Intro_portability.rst

@@ -13,10 +13,14 @@ Programming language standards
 
 Most of the C++ code currently requires a compiler compatible with the
 C++11 standard, the KOKKOS package currently requires C++17.  Most of
-the Python code is written to be compatible with Python 3.5 or later or
+the Python code is written to be compatible with Python 3.6 or later.
-Python 2.7.  Some Python scripts *require* Python 3 and a few others
-still need to be ported from Python 2 to Python 3.
 
+.. deprecated:: TBD
+
+Python 2.x is no longer supported and trying to use it, e.g. for the
+LAMMPS Python module should result in an error.  If you come across
+some part of the LAMMPS distribution that is not (yet) compatible with
+Python 3, please notify the LAMMPS developers.
 
 Build systems
 ^^^^^^^^^^^^^
@@ -24,8 +28,8 @@ Build systems
 LAMMPS can be compiled from source code using a (traditional) build
 system based on shell scripts, a few shell utilities (grep, sed, cat,
 tr) and the GNU make program. This requires running within a Bourne
-shell (``/bin/sh``).  Alternatively, a build system with different back ends
+shell (``/bin/sh``).  Alternatively, a build system with different back
-can be created using CMake.  CMake must be at least version 3.16.
+ends can be created using CMake.  CMake must be at least version 3.16.
 
 Operating systems
 ^^^^^^^^^^^^^^^^^

doc/src/Library_add.rst

@@ -19,9 +19,9 @@ there are now a few requirements for including new changes or extensions.
     be added.
   - New features should also be implemented and documented not just
     for the C interface, but also the Python and Fortran interfaces.
-  - All additions should work and be compatible with ``-DLAMMPS_BIGBIG``,
+  - All additions should work and be compatible with
-    ``-DLAMMPS_SMALLBIG``, ``-DLAMMPS_SMALLSMALL`` as well as when
+    ``-DLAMMPS_BIGBIG``, ``-DLAMMPS_SMALLBIG`` as well as when compiling
-    compiling with and without MPI support.
+    with and without MPI support.
   - The ``library.h`` file should be kept compatible to C code at
     a level similar to C89. Its interfaces may not reference any
     custom data types (e.g. ``bigint``, ``tagint``, and so on) that

doc/src/Library_utility.rst

@@ -20,6 +20,7 @@ functions.  They do not directly call the LAMMPS library.
 - :cpp:func:`lammps_force_timeout`
 - :cpp:func:`lammps_has_error`
 - :cpp:func:`lammps_get_last_error_message`
+- :cpp:func:`lammps_set_show_error`
 - :cpp:func:`lammps_python_api_version`
 
 The :cpp:func:`lammps_free` function is a clean-up function to free
@@ -110,6 +111,11 @@ where such memory buffers were allocated that require the use of
 
 -----------------------
 
+.. doxygenfunction:: lammps_set_show_error
+   :project: progguide
+
+-----------------------
+
 .. doxygenfunction:: lammps_python_api_version
    :project: progguide
 

doc/src/Modify_requirements.rst

@@ -189,10 +189,8 @@ of the contribution.  As of January 2023, all previously included
 Fortran code for the LAMMPS executable has been replaced by equivalent
 C++ code.
 
-Python code must be compatible with Python 3.5 and later.  Large parts
+Python code currently must be compatible with Python 3.6.  If a later
-of LAMMPS (including the :ref:`PYTHON package <PKG-PYTHON>`) are also
+version or Python is required, it needs to be documented.
-compatible with Python 2.7.  Compatibility with Python 2.7 is desirable,
-but compatibility with Python 3.5 is **required**.
 
 Compatibility with older programming language standards is very
 important to maintain portability and availability of LAMMPS on many

doc/src/Packages_details.rst

@@ -2428,7 +2428,7 @@ ways to use LAMMPS and Python together.
 
    Building with the PYTHON package assumes you have a Python development
    environment (headers and libraries) available on your system, which needs
-   to be either Python version 2.7 or Python 3.5 and later.
+   to be Python version 3.6 or later.
 
 **Install:**
 

doc/src/Python_install.rst

@@ -7,6 +7,10 @@ LAMMPS shared library through the Python `ctypes <ctypes_>`_
 module.  Because of the dynamic loading, it is required that LAMMPS is
 compiled in :ref:`"shared" mode <exe>`.
 
+.. versionchanged:: TBD
+
+LAMMPS currently only supports Python version 3.6 or later.
+
 Two components are necessary for Python to be able to invoke LAMMPS code:
 
 * The LAMMPS Python Package (``lammps``) from the ``python`` folder
@@ -106,13 +110,16 @@ folder that the dynamic loader searches or inside of the installed
 
       .. code-block:: bash
 
-         python install.py -p <python package> -l <shared library> -v <version.h file> [-n]
+         python install.py -p <python package> -l <shared library> -v <version.h file> [-n] [-f]
 
       * The ``-p`` flag points to the ``lammps`` Python package folder to be installed,
       * the ``-l`` flag points to the LAMMPS shared library file to be installed,
       * the ``-v`` flag points to the LAMMPS version header file to extract the version date,
-      * and the optional ``-n`` instructs the script to only build a wheel file
+      * the optional ``-n`` instructs the script to only build a wheel file but not attempt
-        but not attempt to install it.
+        to install it,
+      * and the optional ``-f`` argument instructs the script to force installation even if
+        pip would otherwise refuse installation with an
+        :ref:`error about externally managed environments <externally_managed>`.
 
    .. tab:: Virtual environment
 
@@ -136,11 +143,6 @@ folder that the dynamic loader searches or inside of the installed
          # create virtual environment in folder $HOME/myenv
          python3 -m venv $HOME/myenv
 
-      For Python versions prior 3.3 you can use `virtualenv
-      <https://packaging.python.org/en/latest/key_projects/#virtualenv>`_
-      command instead of "python3 -m venv".  This step has to be done
-      only once.
-
       To activate the virtual environment type:
 
       .. code-block:: bash
@@ -199,6 +201,10 @@ folder that the dynamic loader searches or inside of the installed
 
          The ``PYTHONPATH`` needs to point to the parent folder that contains the ``lammps`` package!
 
+In case you run into an "externally-managed-environment" error when
+trying to install the LAMMPS Python module, please refer to
+:ref:`corresponding paragraph <externally_managed>` in the Python HOWTO
+page to learn about options for handling this error.
 
 To verify if LAMMPS can be successfully started from Python, start the
 Python interpreter, load the ``lammps`` Python module and create a
@@ -245,14 +251,14 @@ make MPI calls directly from Python in your script, if you desire.
 We have tested this with `MPI for Python <https://mpi4py.readthedocs.io/>`_
 (aka mpi4py) and you will find installation instruction for it below.
 
-Installation of mpi4py (version 3.0.3 as of Sep 2020) can be done as
+Installation of mpi4py (version 4.0.1 as of Feb 2025) can be done as
 follows:
 
 - Via ``pip`` into a local user folder with:
 
   .. code-block:: bash
 
-     pip install --user mpi4py
+     python3 -m pip install --user mpi4py
 
 - Via ``dnf`` into a system folder for RedHat/Fedora systems:
 
@@ -261,20 +267,20 @@ follows:
      # for use with OpenMPI
      sudo dnf install python3-mpi4py-openmpi
      # for use with MPICH
-     sudo dnf install python3-mpi4py-openmpi
+     sudo dnf install python3-mpi4py-mpich
 
 - Via ``pip`` into a virtual environment (see above):
 
   .. code-block:: console
 
      $ source $HOME/myenv/activate
-     (myenv)$ pip install mpi4py
+     (myenv)$ python -m pip install mpi4py
 
 - Via ``pip`` into a system folder (not recommended):
 
   .. code-block:: bash
 
-     sudo pip install mpi4py
+     sudo python3 -m pip install mpi4py
 
 For more detailed installation instructions and additional options,
 please see the `mpi4py installation <https://mpi4py.readthedocs.io/en/stable/install.html>`_ page.

doc/src/Python_overview.rst

@@ -44,15 +44,11 @@ Below is an example output for Python version 3.8.5.
 .. warning::
 
    The options described in this section of the manual for using Python
-   with LAMMPS currently support either Python 2 or 3.  Specifically
+   with LAMMPS support only Python 3.6 or later.  For use with Python
-   version 2.7 or later and 3.6 or later.  Since the Python community no
+   2.x you will need to use an older LAMMPS version like 29 Aug 2024
-   longer maintains Python 2 (see `this notice
+   or older.  If you notice Python code in the LAMMPS distribution that
-   <https://www.python.org/doc/sunset-python-2/>`_), we recommend use of
+   is not compatible with Python 3, please contact the LAMMPS developers
-   Python 3 with LAMMPS.  While Python 2 code should continue to work,
+   or submit `and issue on GitHub <https://github.com/lammps/lammps/issues>`_
-   that is not something we can guarantee long-term.  If you notice
-   Python code in the LAMMPS distribution that is not compatible with
-   Python 3, please contact the LAMMPS developers or submit `and issue
-   on GitHub <https://github.com/lammps/lammps/issues>`_
 
 ---------
 

doc/src/Run_formats.rst

@@ -0,0 +1,416 @@
+
+File formats used by LAMMPS
+===========================
+
+This page provides a general overview of the kinds of files and file
+formats that LAMMPS is reading and writing.
+
+.. contents:: On this page
+   :depth: 2
+   :backlinks: top
+
+-------------------
+
+Character Encoding
+^^^^^^^^^^^^^^^^^^
+
+For processing text files, the LAMMPS source code assumes `ASCII
+character encoding <https://en.wikipedia.org/wiki/ASCII>`_ which
+represents the digits 0 to 9, the lower and upper case letters a to z,
+some common punctuation and other symbols and a few whitespace
+characters including a regular "space character", "line feed", "carriage
+return", "tabulator".  These characters are all represented by single
+bytes with a value smaller than 128 and only 95 of those 128 values
+represent printable characters.  This list is sufficient to represent
+most English text, but misses accented characters or umlauts or Greek
+symbols and more.
+
+Modern text often uses `UTF-8 character encoding
+<https://en.wikipedia.org/wiki/UTF-8>`_ instead.  This encoding is a way
+to represent many more different characters as defined by the Unicode
+standard.  UFT-8 is compatible with ASCII, since the first 128 values
+are identical with the ASCII encoding.  It is important to note,
+however, that there are Unicode characters that *look* similar to ASCII
+characters, but have a different binary representation.  As a general
+rule, these characters may not be correctly recognized by LAMMPS.  For
+some parts of LAMMPS' text processing, translation tables with known
+"lookalike" characters are used.  The tables are used to substitute
+non-ASCII characters with their ASCII equivalents.  Non-ASCII lookalike
+characters are often used by web browsers or PDF viewers to improve the
+readability of text.  Thus, when using copy and paste to transfer text
+from such an application to your input file, you may unintentionally
+create text that is not exclusively using ASCII encoding and may cause
+errors when LAMMPS is trying to read it.
+
+Lines with non-printable and non-ASCII characters in text files can be
+detected for example with a (Linux) command like the following:
+
+.. code-block:: bash
+
+   env LC_ALL=C grep -n '[^ -~]' some_file.txt
+
+Number Formatting
+^^^^^^^^^^^^^^^^^
+
+Different countries and languages have different conventions to format
+numbers.  While in some regions commas are used for fractions and points
+to indicate thousand, million and so on, this is reversed in other
+regions.  Modern operating systems have facilities to adjust input and
+output accordingly that are collectively referred to as "native language
+support" (NLS).  The exact rules are often applied according to the
+value of the ``$LANG`` environment variable (e.g. "en_US.utf8" for
+English text in UTF-8 encoding).
+
+For the sake of simplicity of the implementation and transferability of
+results, LAMMPS does not support this and instead expects numbers being
+formatted in the generic or "C" locale.  The "C" locale has no
+punctuation for thousand, million and so on and uses a decimal point for
+fractions.  One thousand would be represented as "1000.0" and not as
+"1,000.0" nor as "1.000,0".  Having native language support enabled for
+a locale other than "C" will result in different behavior when
+converting or formatting numbers that can trigger unexpected errors.
+
+LAMMPS also only accepts integer numbers when an integer is required, so
+using floating point equivalents like "1.0" are not accepted; you *must*
+use "1" instead.
+
+For floating point numbers in scientific notation, the Fortran double
+precision notation "1.1d3" is not accepted; you have to use "1100",
+"1100.0" or "1.1e3".
+
+Input file
+^^^^^^^^^^
+
+A LAMMPS input file is a text file with commands.  It is read
+line-by-line and each line is processed *immediately*.  Before looking
+for commands and executing them, there is a pre-processing step where
+comments (non-quoted text starting with a pound sign '#') are removed,
+``${variable}`` and ``$(expression)`` constructs are expanded or
+evaluated, and lines that end in the ampersand character '&' are
+combined with the next line (similar to Fortran 90 free-format source
+code).  After the pre-processing, lines are split into "words" and
+evaluated.  The first word must be a :doc:`command <Commands_all>` and
+all following words are arguments.  Below are some example lines:
+
+.. code-block:: LAMMPS
+
+   # full line comment
+
+   # some global settings
+   units           lj
+   atom_style      atomic
+   # ^^ command    ^^ argument(s)
+
+   variable        x index 1       # may be overridden from command line with -var x <value>
+   variable        xx equal 20*$x  # variable "xx" is always 20 times "x"
+
+   lattice         fcc 0.8442
+
+   # example of a command written across multiple lines
+   # the "region" command uses spacing from "lattice" command, unless "units box" is specified
+   region          box block 0.0 ${xx} &
+                             0.0 40.0  &
+                             0.0 30.0
+   # create simulation box and fill with atoms according to lattice setting
+   create_box      1 box
+   create_atoms    1 box
+
+   # set force field and parameters
+   mass            1 1.0
+   pair_style      lj/cut 2.5
+   pair_coeff      1 1 1.0 1.0 2.5
+
+   # run simulation
+   fix             1 all nve
+   run             1000
+
+The pivotal command in this example input is the :doc:`create_box
+command <create_box>`.  It defines the simulation system and many
+parameters that go with it: units, atom style, number of atom types (and
+other types) and more.  Those settings are *locked in* after the box is
+created.  Commands that change these kind of settings are only allowed
+**before** a simulation box is created and many other commands are only
+allowed **after** the simulation box is defined (e.g. :doc:`pair_coeff
+<pair_coeff>`).  Very few commands (e.g. :doc:`pair_style <pair_style>`)
+may be used in either part of the input.  The :doc:`read_data
+<read_data>` and :doc:`read_restart <read_restart>` commands also create
+the system box and thus have a similar pivotal function.
+
+The LAMMPS input syntax has minimal support for conditionals and loops,
+but if more complex operations are required, it is recommended to use
+the library interface, e.g. :doc:`from Python using the LAMMPS Python
+module <Python_run>`.
+
+There is a frequent misconception about the :doc:`if command <if>`:
+this is a command for conditional execution **outside** a run or
+minimization.  To trigger actions on specific conditions **during**
+a run is a non-trivial operation that usually requires adopting one
+of the available "fix" commands or creating a new "fix" command.
+
+LAMMPS commands change the internal state and thus the order of commands
+matters and reordering them can produce different results.  For example,
+the region defined by the :doc:`region command <region>` in the example
+above depends on the :doc:`lattice setting <lattice>` and thus its
+dimensions will be different depending on the order of the two commands.
+
+Each line must have an "end-of-line" character (line feed or carriage
+return plus line feed).  Some text editors do not automatically insert
+one which may cause LAMMPS to ignore the last command.  It is thus
+recommended to always have an empty line at the end of an input file.
+
+The specific details describing how LAMMPS input is processed and parsed
+are explained in :doc:`Commands_parse`.
+
+Data file
+^^^^^^^^^
+
+A LAMMPS data file contains a description of a system suitable for
+reading with the :doc:`read_data command <read_data>`.  Data files are
+commonly used for setting up complex molecular systems that can be
+difficult to achieve with the commands :doc:`create_box <create_box>`
+and :doc:`create_atoms <create_atoms>` alone.  Also, data files can be
+used as a portable alternatives to a :doc:`binary restart file
+<restart>`.  A restart file can be converted into a data file from the
+:doc:`command line <Run_options>`.
+
+Data files have a header section at the very beginning of the file and
+multiple titled sections such as "Atoms", Masses", "Pair Coeffs", and so
+on.  Header keywords can only be used *before* the first title section.
+
+The data file **always** starts with a "title" line, which will be
+**ignored** by LAMMPS.  Omitting the title line can lead to unexpected
+behavior because a line of the header with an actual setting may be
+ignored.  In this case, the mistakenly ignored line often contains the
+"atoms" keyword, which results in LAMMPS assuming that there are no
+atoms in the data file and thus throwing an error on the contents of the
+"Atoms" section.  The title line may contain some keywords that can be
+used by external programs to convey information about the system
+(included as comments), that is not required and not read by LAMMPS.
+
+The line following a section title is also **ignored**.  An error will
+occur if an empty line is not placed after a section title.  The number
+of lines in titled sections depends on header keywords, like the number
+of atom types, the number of atoms, the number of bond types, the number
+of bonds, and so on.  The data in those sections has to be complete.  A
+special case are the "Pair Coeffs" and "PairIJ Coeffs" sections; the
+former is for force fields and pair styles that use mixing of non-bonded
+potential parameters, the latter for pair styles and force fields
+requiring explicit coefficients.  Thus with *N* being the number of atom
+types, the "Pair Coeffs" section has *N* entries while "PairIJ Coeffs"
+has :math:`N \cdot (N-1)` entries.  Internally, these sections will be
+converted to :doc:`pair_coeff <pair_coeff>` commands.  Thus the
+corresponding :doc:`pair style <pair_style>` must have been set *before*
+the :doc:`read_data command <read_data>` reads the data file.
+
+Data files may contain comments, which start with the pound sign '#'.
+There must be at least one blank between a valid keyword and the pound
+sign. Below is a simple example case of a data file for :doc:`atom style
+full <atom_style>`.
+
+.. code-block:: bash
+
+   LAMMPS Title line (ignored)
+   # full line comment
+
+           10  atoms # comment
+            4  atom types
+
+    -36.840194 64.211560 xlo xhi
+    -41.013691 68.385058 ylo yhi
+    -29.768095 57.139462 zlo zhi
+
+   Masses
+
+     1 12.0110
+     2 12.0110
+     3 15.9990
+     4  1.0080
+
+   Pair Coeffs  # this section is optional
+
+     1    0.110000    3.563595    0.110000    3.563595
+     2    0.080000    3.670503    0.010000    3.385415
+     3    0.120000    3.029056    0.120000    2.494516
+     4    0.022000    2.351973    0.022000    2.351973
+
+   Atoms # full
+
+         1      1       1       0.560   43.99993  58.52678  36.78550   0   0   0
+         2      1       2      -0.270   45.10395  58.23499  35.86693   0   0   0
+         3      1       3      -0.510   43.81519  59.54928  37.43995   0   0   0
+         4      1       4       0.090   45.71714  57.34797  36.13434   0   0   0
+         5      1       4       0.090   45.72261  59.13657  35.67007   0   0   0
+         6      1       4       0.090   44.66624  58.09539  34.85538   0   0   0
+         7      1       3      -0.470   43.28193  57.47427  36.91953   0   0   0
+         8      1       4       0.070   42.07157  57.45486  37.62418   0   0   0
+         9      1       1       0.510   42.19985  57.57789  39.12163   0   0   0
+        10      1       1       0.510   41.88641  58.62251  39.70398   0   0   0
+   #  ^^atomID ^^molID ^^type  ^^charge ^^xcoord  ^^ycoord  ^^ycoord  ^^image^^flags (optional)
+
+   Velocities # this section is optional
+
+         1  0.0050731  -0.00398928  0.00391473
+         2 -0.0175184   0.0173484  -0.00489207
+         3  0.00597225 -0.00202006  0.00166454
+         4 -0.010395   -0.0082582   0.00316419
+         5 -0.00390877  0.00470331 -0.00226911
+         6 -0.00111157 -0.00374545 -0.0169374
+         7  0.00209054 -0.00594936 -0.000124563
+         8  0.00635002 -0.0120093  -0.0110999
+         9 -0.004955   -0.0123375   0.000403422
+        10  0.00265028 -0.00189329 -0.00293198
+
+The common problem is processing the "Atoms" section, since its format
+depends on the :doc:`atom style <atom_style>` used, and that setting
+must be done in the input file *before* reading the data file.  To
+assist with detecting incompatible data files, a comment is appended to
+the "Atoms" title indicating the atom style used (or intended) when
+*writing* the data file.  For example, below is an "Atoms" section for
+:doc:`atom style charge <atom_style>`, which omits the molecule ID
+column.
+
+.. code-block:: bash
+
+   Atoms # charge
+
+         1      1       0.560   43.99993  58.52678  36.78550
+         2      2      -0.270   45.10395  58.23499  35.86693
+         3      3      -0.510   43.81519  59.54928  37.43995
+         4      4       0.090   45.71714  57.34797  36.13434
+         5      4       0.090   45.72261  59.13657  35.67007
+         6      4       0.090   44.66624  58.09539  34.85538
+         7      3      -0.470   43.28193  57.47427  36.91953
+         8      4       0.070   42.07157  57.45486  37.62418
+         9      1       0.510   42.19985  57.57789  39.12163
+        10      1       0.510   41.88641  58.62251  39.70398
+   #  ^^atomID ^^type  ^^charge ^^xcoord  ^^ycoord  ^^ycoord
+
+Another source of confusion about the "Atoms" section format is the
+ordering of columns.  The three atom style variants `atom_style full`,
+`atom_style hybrid charge molecular`, and `atom_style hybrid molecular
+charge` all carry the same per-atom information. However, in data files,
+the Atoms section has the columns 'Atom-ID Molecule-ID Atom-type Charge
+X Y Z' for atom style full, but for hybrid atom styles the first columns
+are always 'Atom-ID Atom-type X Y Z' followed by any *additional* data
+added by the hybrid styles, for example, 'Charge Molecule-ID' for the
+first hybrid style and 'Molecule-ID Charge' in the second hybrid style
+variant.  Finally, an alternative to a hybrid atom style is to use fix
+property/atom, e.g. to add molecule IDs to atom style charge.  In this
+case the "Atoms" section is formatted according to atom style charge and
+a new section, "Molecules" is added that contains lines with 'Atom-ID
+Molecule-ID', one for each atom in the system.  For adding charges to
+atom style molecular with fix property/atom, the "Atoms" section is now
+formatted according to the atom style and a "Charges" section is added.
+
+Molecule file
+^^^^^^^^^^^^^
+
+Molecule files for use with the :doc:`molecule command <molecule>` look
+quite similar to data files but they do not have a compatible format,
+i.e., one cannot use a data file as molecule file and vice versa.  Below
+is a simple example for a water molecule (SPC/E model).  Same as a data
+file, there is an ignored title line and you can use comments.  However,
+there is no information about the number of types or the box dimensions.
+These parameters are set when the simulation box is created.  Thus the
+header only has the count of atoms, bonds, and so on.
+
+Molecule files have a header followed by sections (just as in data
+files), but the section names are different than those of a data file.
+There is no "Atoms" section and the section formats in molecule files is
+independent of the atom style.  Its information is split across multiple
+sections, like "Coords", "Types", and "Charges".  Note that no "Masses"
+section is needed here.  The atom masses are by default tied to the atom
+type and set with a data file or the :doc:`mass command <mass>`.  A
+"Masses" section would only be required for atom styles with per-atom
+masses, e.g. atom style sphere, where in data files you would provide
+the density and the diameter instead of the mass.
+
+Since the entire file is a 'molecule', LAMMPS will assign a new
+molecule-ID (if supported by the atom style) when atoms are instantiated
+from a molecule file, e.g. with the :doc:`create_atoms command
+<create_atoms>`.  It is possible to include a "Molecules" section to
+indicate that the atoms belong to multiple 'molecules'.  Atom-IDs and
+molecule-IDs in the molecule file are relative for the file
+(i.e. starting from 1) and will be translated into actual atom-IDs also
+when the atoms from the molecule are created.
+
+.. code-block:: bash
+
+   # Water molecule. SPC/E model.
+
+   3 atoms
+   2 bonds
+   1 angles
+
+   Coords
+
+   1    1.12456   0.09298   1.27452
+   2    1.53683   0.75606   1.89928
+   3    0.49482   0.56390   0.65678
+
+   Types
+
+   1        1
+   2        2
+   3        2
+
+   Charges
+
+   1       -0.8472
+   2        0.4236
+   3        0.4236
+
+   Bonds
+
+   1   1      1      2
+   2   1      1      3
+
+   Angles
+
+   1   1      2      1      3
+
+
+There are also optional sections, e.g. about :doc:`SHAKE <fix_shake>`
+and :doc:`special bonds <special_bonds>`. Those sections are only needed
+if the molecule command is issued *before* the simulation box is
+defined.  Otherwise, the molecule command can derive the required
+settings internally.
+
+Restart file
+^^^^^^^^^^^^
+
+LAMMPS restart files are binary files and not available in text format.
+They can be identified by the first few bytes that contain the (C-style)
+string ``LammpS RestartT`` as `magic string
+<https://en.wikipedia.org/wiki/Magic_string>`_.  This string is followed
+by a 16-bit integer of the number 1 used for detecting whether the
+computer writing the restart has the same `endianness
+<https://en.wikipedia.org/wiki/Endianness>`_ as the computer reading it.
+If not, the file cannot be read correctly.  This integer is followed by
+a 32-bit integer indicating the file format revision (currently 3),
+which can be used to implement backward compatibility for reading older
+revisions.
+
+This information has been added to the `Unix "file" command's
+<https://www.darwinsys.com/file/>` "magic" file so that restart files
+can be identified without opening them.  If you have a fairly recent
+version, it should already be included.  If you have an older version,
+the LAMMPS source package :ref:`contains a file with the necessary
+additions <magic>`.
+
+The rest of the file is organized in sections of a 32-bit signed integer
+constant indicating the kind of content and the corresponding value (or
+values).  If those values are arrays (including C-style strings), then
+the integer constant is followed by a 32-bit integer indicating the
+length of the array.  This mechanism will read the data regardless of
+the ordering of the sections.  Symbolic names of the section constants
+are in the ``lmprestart.h`` header file.
+
+LAMMPS restart files are not expected to be portable between platforms
+or LAMMPS versions, but changes to the file format are rare.
+
+.. Native Dump file
+.. ^^^^^^^^^^^^^^^^
+..
+.. Potential files
+.. ^^^^^^^^^^^^^^^

doc/src/Run_head.rst

@@ -1,10 +1,11 @@
 Run LAMMPS
 **********
 
-These pages explain how to run LAMMPS once you have :doc:`installed an executable <Install>` or :doc:`downloaded the source code <Install>`
+These pages explain how to run LAMMPS once you have :doc:`installed an
-and :doc:`built an executable <Build>`.  The :doc:`Commands <Commands>`
+executable <Install>` or :doc:`downloaded the source code <Install>` and
-doc page describes how input scripts are structured and the commands
+:doc:`built an executable <Build>`.  The :doc:`Commands <Commands>` doc
-they can contain.
+page describes how input scripts are structured and the commands they
+can contain.
 
 .. toctree::
    :maxdepth: 1
@@ -12,4 +13,5 @@ they can contain.
    Run_basics
    Run_options
    Run_output
+   Run_formats
    Run_windows

doc/src/Run_output.rst

@@ -117,14 +117,19 @@ number of histogram counts is equal to the number of processors.
 
 ----------
 
-The last section gives aggregate statistics (across all processors)
+The last section gives aggregate statistics (across all processors) for
-for pairwise neighbors and special neighbors that LAMMPS keeps track
+pairwise neighbors and special neighbors that LAMMPS keeps track of (see
-of (see the :doc:`special_bonds <special_bonds>` command).  The number
+the :doc:`special_bonds <special_bonds>` command).  This section will
-of times neighbor lists were rebuilt is tallied, as is the number of
+not always contain data, for example when there has not been a neighbor
-potentially *dangerous* rebuilds.  If atom movement triggered neighbor
+rebuild, or the neighbor list was constructed on the GPU or when a
-list rebuilding (see the :doc:`neigh_modify <neigh_modify>` command),
+hybrid pair style was used and LAMMPS cannot determine a suitable (base)
-then dangerous reneighborings are those that were triggered on the
+neighbor list to draw the statistics from.
-first timestep atom movement was checked for.  If this count is
+
+The number of times neighbor lists were rebuilt is tallied, as is the
+number of potentially *dangerous* rebuilds.  If atom movement triggered
+neighbor list rebuilding (see the :doc:`neigh_modify <neigh_modify>`
+command), then dangerous reneighborings are those that were triggered on
+the first timestep atom movement was checked for.  If this count is
 non-zero you may wish to reduce the delay factor to ensure no force
 interactions are missed by atoms moving beyond the neighbor skin
 distance before a rebuild takes place.

doc/src/Speed_compare.rst

@@ -44,11 +44,6 @@ section below for examples where this has been done.
   system the crossover (in single precision) is often about 50K-100K
   atoms per GPU.  When performing double precision calculations the
   crossover point can be significantly smaller.
-* Both KOKKOS and GPU package compute bonded interactions (bonds, angles,
-  etc) on the CPU.  If the GPU package is running with several MPI processes
-  assigned to one GPU, the cost of computing the bonded interactions is
-  spread across more CPUs and hence the GPU package can run faster in these
-  cases.
 * When using LAMMPS with multiple MPI ranks assigned to the same GPU, its
   performance depends to some extent on the available bandwidth between
   the CPUs and the GPU. This can differ significantly based on the
@@ -85,10 +80,10 @@ section below for examples where this has been done.
   code (with a performance penalty due to having data transfers between
   host and GPU).
 * The GPU package requires neighbor lists to be built on the CPU when using
-  exclusion lists, or a triclinic simulation box.
+  hybrid pair styles, exclusion lists, or a triclinic simulation box.
-* The GPU package can be compiled for CUDA or OpenCL and thus supports
+* The GPU package can be compiled for CUDA, HIP, or OpenCL and thus supports
-  both, NVIDIA and AMD GPUs well. On NVIDIA hardware, using CUDA is typically
+  NVIDIA, AMD, and Intel GPUs well. On NVIDIA hardware, using CUDA is
-  resulting in equal or better performance over OpenCL.
+  typically resulting in equal or better performance over OpenCL.
 * OpenCL in the GPU package does theoretically also support Intel CPUs or
   Intel Xeon Phi, but the native support for those in KOKKOS (or INTEL)
   is superior.

doc/src/Tools.rst

@@ -930,7 +930,7 @@ dependencies and redirects the download to the local cache.
 
    mkdir build
    cd build
-   cmake -D LAMMPS_DOWNLOADS_URL=${HTTP_CACHE_URL} -C "${LAMMPS_HTTP_CACHE_CONFIG}" -C ../cmake/presets/most.cmake ../cmake
+   cmake -D LAMMPS_DOWNLOADS_URL=${HTTP_CACHE_URL} -C "${LAMMPS_HTTP_CACHE_CONFIG}" -C ../cmake/presets/most.cmake -D DOWNLOAD_POTENTIALS=off ../cmake
    make -j 8
 
    deactivate_caches

doc/src/angle_mwlc.rst

@@ -21,7 +21,7 @@ Examples
 Description
 """""""""""
 
-.. versionadded:: TBD
+.. versionadded:: 4Feb2025
 
 The *mwlc* angle style models a meltable wormlike chain and can be used
 to model non-linear bending elasticity of polymers, e.g. DNA.  *mwlc*

doc/src/bond_bpm_spring.rst

@@ -10,7 +10,7 @@ Syntax
 
    bond_style bpm/spring keyword value attribute1 attribute2 ...
 
-* optional keyword = *overlay/pair* or *store/local* or *smooth* or *break* or *volume/factor*
+* optional keyword = *overlay/pair* or *store/local* or *smooth* or *normalize* or *break* or *volume/factor*
 
   .. parsed-literal::
 
@@ -123,7 +123,7 @@ heuristic maximum strain used by typical non-bpm bond styles. Similar behavior
 to *break no* can also be attained by setting an arbitrarily high value of
 :math:`\epsilon_c`. One cannot use *break no* with *smooth yes*.
 
-.. versionadded:: TBD
+.. versionadded:: 4Feb2025
 
 The *volume/factor* keyword toggles whether an additional multibody
 contribution is added to he force using the formulation in
@@ -141,7 +141,8 @@ calculated using bond lengths squared and the cube root in the above equation
 is accordingly replaced with a square root. This approximation assumes bonds
 are evenly distributed on a spherical surface and neglects constant prefactors
 which are irrelevant since only the ratio of volumes matters. This term may be
-used to adjust the Poisson's ratio.
+used to adjust the Poisson's ratio. See the simulation in the
+``examples/bpm/poissons_ratio`` directory for a demonstration of this effect.
 
 If a bond is broken (or created), :math:`V_{0,i}` is updated by subtracting
 (or adding) that bond's contribution.
@@ -152,7 +153,7 @@ the data file or restart files read by the :doc:`read_data
 <read_data>` or :doc:`read_restart <read_restart>` commands:
 
 * :math:`k`             (force/distance units)
-* :math:`\epsilon_c`    (unit less)
+* :math:`\epsilon_c`    (unitless)
 * :math:`\gamma`        (force/velocity units)
 
 Additionally, if *volume/factor* is set to *yes*, a fourth coefficient
@@ -214,11 +215,11 @@ for an overview of LAMMPS output options.
 The vector or array will be floating point values that correspond to
 the specified attribute.
 
-The single() function of this bond style returns 0.0 for the energy
+The potential energy and the single() function of this bond style return
-of a bonded interaction, since energy is not conserved in these
+:math:`k (r - r_0)^2 / 2` as a proxy of the energy of a bonded interaction,
-dissipative potentials.  The single() function also calculates an
+ignoring any volumetric/smoothing factors or dissipative forces.  The single()
-extra bond quantity, the initial distance :math:`r_0`. This
+function also calculates an extra bond quantity, the initial distance
-extra quantity can be accessed by the
+:math:`r_0`. This extra quantity can be accessed by the
 :doc:`compute bond/local <compute_bond_local>` command as *b1*\ .
 
 Restrictions

doc/src/bond_bpm_spring_plastic.rst

@@ -0,0 +1,184 @@
+.. index:: bond_style bpm/spring/plastic
+
+bond_style bpm/spring/plastic command
+=====================================
+
+Syntax
+""""""
+
+.. code-block:: LAMMPS
+
+   bond_style bpm/spring/plastic keyword value attribute1 attribute2 ...
+
+* optional keyword = *overlay/pair* or *store/local* or *smooth* or *normalize* or *break*
+
+  .. parsed-literal::
+
+       *store/local* values = fix_ID N attributes ...
+          * fix_ID = ID of associated internal fix to store data
+          * N = prepare data for output every this many timesteps
+          * attributes = zero or more of the below attributes may be appended
+
+            *id1, id2* = IDs of two atoms in the bond
+            *time* = the timestep the bond broke
+            *x, y, z* = the center of mass position of the two atoms when the bond broke (distance units)
+            *x/ref, y/ref, z/ref* = the initial center of mass position of the two atoms (distance units)
+
+       *overlay/pair* value = *yes* or *no*
+          bonded particles will still interact with pair forces
+
+       *smooth* value = *yes* or *no*
+          smooths bond forces near the breaking point
+
+       *normalize* value = *yes* or *no*
+          normalizes bond forces by the reference length
+
+       *break* value = *yes* or *no*
+          indicates whether bonds break during a run
+
+Examples
+""""""""
+
+.. code-block:: LAMMPS
+
+   bond_style bpm/spring/plastic
+   bond_coeff 1 1.0 0.05 0.1 0.02
+
+   bond_style bpm/spring/plastic myfix 1000 time id1 id2
+   dump 1 all local 1000 dump.broken f_myfix[1] f_myfix[2] f_myfix[3]
+   dump_modify 1 write_header no
+
+Description
+"""""""""""
+
+.. versionadded:: TBD
+
+The *bpm/spring/plastic* bond style computes forces based on
+deviations from the initial reference state of the two atoms and the
+strain history.  The reference length of the bond :math:`r_0` is stored
+by each bond when it is first computed in the setup of a run. Initially,
+the equilibrium length of each bond :math:`r_\mathrm{eq}` is set equal
+to :math:`r_0` but can evolve. data is then preserved across run commands
+and is written to :doc:`binary restart files <restart>` such that restarting
+the system will not modify either of these quantities.
+
+This bond style only applies central-body forces which conserve the
+translational and rotational degrees of freedom of a bonded set of
+particles. The force has a magnitude of
+
+.. math::
+
+   F = -k (r_\mathrm{eq} - r) w
+
+where :math:`k` is a stiffness, :math:`r` is the current distance between
+the two particles, and :math:`w` is an optional smoothing factor discussed
+below. If the bond stretches beyond a strain of :math:`\epsilon_p` in compression
+or extension, it will plastically activate and :math:`r_\mathrm{eq}` will evolve
+to ensure :math:`|(r-r_\mathrm{eq})/r_\mathrm{eq}|` never exceeds :math:`\epsilon_p`.
+Therefore, if a bond is continually loaded in either tension or compression, the
+force will initially grow elastically before plateauing. See
+:ref:`(Clemmer) <plastic-Clemmer>` for more details on these mechanics.
+
+Bonds will break at a strain of :math:`\epsilon_c`.  This is done by setting
+the bond type to 0 such that forces are no longer computed.
+
+An additional damping force is applied to the bonded
+particles.  This forces is proportional to the difference in the
+normal velocity of particles:
+
+.. math::
+
+   F_D = - \gamma w (\hat{r} \bullet \vec{v})
+
+where :math:`\gamma` is the damping strength, :math:`\hat{r}` is the
+radial normal vector, and :math:`\vec{v}` is the velocity difference
+between the two particles.
+
+The smoothing factor :math:`w`  is constructed such that forces smoothly
+go to zero, avoiding discontinuities, as bonds approach the critical
+breaking strain
+
+.. math::
+
+   w = 1.0 - \left( \frac{r - r_0}{r_0 \epsilon_c} \right)^8 .
+
+The following coefficients must be defined for each bond type via the
+:doc:`bond_coeff <bond_coeff>` command as in the example above, or in
+the data file or restart files read by the :doc:`read_data
+<read_data>` or :doc:`read_restart <read_restart>` commands:
+
+* :math:`k`             (force/distance units)
+* :math:`\epsilon_c`    (unitless)
+* :math:`\gamma`        (force/velocity units)
+* :math:`\epsilon_p`    (unitless)
+
+See the :doc:`bpm/spring doc page <bond_bpm_spring>` for information on
+the *smooth*, *normalize*, *break*, *overlay/pair*, and *store/local*
+keywords.
+
+Note that when unbroken bonds are dumped to a file via the
+:doc:`dump local <dump>` command, bonds with type 0 (broken bonds)
+are not included.
+The :doc:`delete_bonds <delete_bonds>` command can also be used to
+query the status of broken bonds or permanently delete them, e.g.:
+
+.. code-block:: LAMMPS
+
+   delete_bonds all stats
+   delete_bonds all bond 0 remove
+
+----------
+
+Restart and other info
+"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+
+This bond style writes the reference state and plastic history of each
+bond to :doc:`binary restart files <restart>`. Loading a restart file
+will properly restore bonds. However, the reference state is NOT written
+to data files.  Therefore reading a data file will not restore bonds and
+will cause their reference states to be redefined.
+
+The potential energy and the single() function of this bond style
+returns zero.  The single() function also calculates two extra bond
+quantities, the initial distance :math:`r_0` and the current equilibrium
+length :math:`r_eq`. These extra quantities can be accessed by the
+:doc:`compute bond/local <compute_bond_local>` command as *b1* and *b2*,
+respectively.
+
+Restrictions
+""""""""""""
+
+This bond style is part of the BPM package.  It is only enabled if
+LAMMPS was built with that package.  See the :doc:`Build package
+<Build_package>` page for more info.
+
+By default if pair interactions between bonded atoms are to be disabled,
+this bond style requires setting
+
+.. code-block:: LAMMPS
+
+   special_bonds lj 0 1 1 coul 1 1 1
+
+and :doc:`newton <newton>` must be set to bond off.  If the *overlay/pair*
+keyword is set to *yes*, this bond style alternatively requires setting
+
+.. code-block:: LAMMPS
+
+   special_bonds lj/coul 1 1 1
+
+Related commands
+""""""""""""""""
+
+:doc:`bond_coeff <bond_coeff>`, :doc:`bond bpm/spring <bond_bpm_spring>`
+
+Default
+"""""""
+
+The option defaults are *overlay/pair* = *no*, *smooth* = *yes*, *normalize* = *no*, and *break* = *yes*
+
+----------
+
+.. _plastic-Clemmer:
+
+**(Clemmer)** Clemmer and Lechman, Powder Technology (2025).
+

doc/src/bond_harmonic.rst

@@ -60,6 +60,8 @@ Related commands
 """"""""""""""""
 
 :doc:`bond_coeff <bond_coeff>`, :doc:`delete_bonds <delete_bonds>`
+:doc:`bond style harmonic/shift <bond_harmonic_shift>`,
+:doc:`bond style harmonic/shift/cut <bond_harmonic_shift_cut>`
 
 Default
 """""""

doc/src/bond_harmonic_shift.rst

@@ -31,9 +31,15 @@ the potential
 
    E = \frac{U_{\text{min}}}{(r_0-r_c)^2} \left[ (r-r_0)^2-(r_c-r_0)^2 \right]
 
-where :math:`r_0` is the equilibrium bond distance, and :math:`r_c` the critical distance.
+where :math:`r_0` is the equilibrium bond distance, and :math:`r_c` the
-The potential is :math:`-U_{\text{min}}` at :math:`r0` and zero at :math:`r_c`. The spring constant is
+critical distance.  The potential energy has the value
-:math:`k = U_{\text{min}} / [ 2 (r_0-r_c)^2]`.
+:math:`-U_{\text{min}}` at :math:`r_0` and zero at :math:`r_c`.  This
+bond style differs from :doc:`bond_style harmonic <bond_harmonic>`
+by the value of the potential energy.
+
+The equivalent spring constant value *K* for use with :doc:`bond_style
+harmonic <bond_harmonic>` can be computed using :math:`K =
+U_{\text{min}} / [(r_0-r_c)^2]`.
 
 The following coefficients must be defined for each bond type via the
 :doc:`bond_coeff <bond_coeff>` command as in the example above, or in
@@ -41,9 +47,7 @@ the data file or restart files read by the :doc:`read_data <read_data>`
 or :doc:`read_restart <read_restart>` commands:
 
 * :math:`U_{\text{min}}` (energy)
-
 * :math:`r_0` (distance)
-
 * :math:`r_c` (distance)
 
 ----------
@@ -63,7 +67,8 @@ Related commands
 """"""""""""""""
 
 :doc:`bond_coeff <bond_coeff>`, :doc:`delete_bonds <delete_bonds>`,
-:doc:`bond_harmonic <bond_harmonic>`
+:doc:`bond style harmonic <bond_harmonic>`,
+:doc:`bond style harmonic/shift/cut <bond_harmonic_shift_cut>`
 
 Default
 """""""

doc/src/bond_harmonic_shift_cut.rst

@@ -31,9 +31,14 @@ uses the potential
 
    E = \frac{U_{\text{min}}}{(r_0-r_c)^2} \left[ (r-r_0)^2-(r_c-r_0)^2 \right]
 
-where :math:`r_0` is the equilibrium bond distance, and rc the critical distance.
+where :math:`r_0` is the equilibrium bond distance, and :math:`r_c` the
-The bond potential is zero for distances :math:`r > r_c`. The potential is :math:`-U_{\text{min}}`
+critical distance.  The bond potential is zero and thus its force also
-at :math:`r_0` and zero at :math:`r_c`. The spring constant is :math:`k = U_{\text{min}} / [ 2 (r_0-r_c)^2]`.
+zero for distances :math:`r > r_c`.  The potential energy has the value
+:math:`-U_{\text{min}}` at :math:`r_0` and zero at :math:`r_c`.
+
+The equivalent spring constant value *K* for use with :doc:`bond_style
+harmonic <bond_harmonic>` for :math:`r <= r_c`, can be computed using
+:math:`K = U_{\text{min}} / [(r_0-r_c)^2]`
 
 The following coefficients must be defined for each bond type via the
 :doc:`bond_coeff <bond_coeff>` command as in the example above, or in

doc/src/bond_rheo_shell.rst

@@ -94,7 +94,7 @@ the data file or restart files read by the :doc:`read_data
 <read_data>` or :doc:`read_restart <read_restart>` commands:
 
 * :math:`k`             (force/distance units)
-* :math:`\epsilon_c`    (unit less)
+* :math:`\epsilon_c`    (unitless)
 * :math:`\gamma`        (force/velocity units)
 
 Unlike other BPM-style bonds, this bond style does not update special

doc/src/bond_style.rst

@@ -10,7 +10,7 @@ Syntax
 
    bond_style style args
 
-* style = *none* or *zero* or *hybrid* or *bpm/rotational* or *bpm/spring* or *class2* or *fene* or *fene/expand* or *fene/nm* or *gaussian* or *gromos* or *harmonic* or *harmonic/restrain* *harmonic/shift* or *harmonic/shift/cut* or *lepton* or *morse* or *nonlinear* or *oxdna/fene* or *oxdena2/fene* or *oxrna2/fene* or *quartic* or *special* or *table*
+* style = *none* or *zero* or *hybrid* or *bpm/rotational* or *bpm/spring* or *bpm/spring/plastic* or *class2* or *fene* or *fene/expand* or *fene/nm* or *gaussian* or *gromos* or *harmonic* or *harmonic/restrain* *harmonic/shift* or *harmonic/shift/cut* or *lepton* or *morse* or *nonlinear* or *oxdna/fene* or *oxdena2/fene* or *oxrna2/fene* or *quartic* or *special* or *table*
 
 * args = none for any style except *hybrid*
 
@@ -86,6 +86,7 @@ accelerated styles exist.
 
 * :doc:`bpm/rotational <bond_bpm_rotational>` - breakable bond with forces and torques based on deviation from reference state
 * :doc:`bpm/spring <bond_bpm_spring>` - breakable bond with forces based on deviation from reference length
+* :doc:`bpm/spring/plastic <bond_bpm_spring_plastic>` - a similar breakable bond with plastic yield
 * :doc:`class2 <bond_class2>` - COMPASS (class 2) bond
 * :doc:`fene <bond_fene>` - FENE (finite-extensible non-linear elastic) bond
 * :doc:`fene/expand <bond_fene_expand>` - FENE bonds with variable size particles

doc/src/comm_modify.rst

@@ -15,15 +15,12 @@ Syntax
 
   .. parsed-literal::
 
-       *mode* value = *single*, *multi*, or *multi/old* = communicate atoms within a single or multiple distances
+       *mode* value = *single* or *multi* = communicate atoms within a single or multiple distances
        *cutoff* value = Rcut (distance units) = communicate atoms from this far away
        *cutoff/multi* collection value
           collection = atom collection or collection range (supports asterisk notation)
           value = Rcut (distance units) = communicate atoms for selected types from this far away
        *reduce/multi* arg = none = reduce number of communicated ghost atoms for multi style
-       *cutoff/multi/old* type value
-          type = atom type or type range (supports asterisk notation)
-          value = Rcut (distance units) = communicate atoms for selected types from this far away
        *group* value = group-ID = only communicate atoms in the group
        *vel* value = *yes* or *no* = do or do not communicate velocity info with ghost atoms
 
@@ -66,19 +63,16 @@ subdomain.  The distance is by default the maximum of the neighbor
 cutoff across all atom type pairs.
 
 For many systems this is an efficient algorithm, but for systems with
-widely varying cutoffs for different type pairs, the *multi* or *multi/old* mode can
+widely varying cutoffs for different type pairs, the *multi* mode can be
-be faster.  In *multi*, each atom is assigned to a collection which should
+faster.  In *multi*, each atom is assigned to a collection which should
-correspond to a set of atoms with similar interaction cutoffs.
+correspond to a set of atoms with similar interaction cutoffs.  See the
-See the :doc:`neighbor <neighbor>` command for a detailed description of collections.
+:doc:`neighbor <neighbor>` command for a detailed description of
-In this case, each atom collection is assigned its own distance
+collections.  In this case, each atom collection is assigned its own
-cutoff for communication purposes, and fewer atoms will be
+distance cutoff for communication purposes, and fewer atoms will be
-communicated. in *multi/old*, a similar technique is used but atoms
+communicated. See the :doc:`neighbor multi <neighbor>` command for
-are grouped by atom type. See the :doc:`neighbor multi <neighbor>`  and
-:doc:`neighbor multi/old <neighbor>` commands for
 neighbor list construction options that may also be beneficial for
-simulations of this kind. The *multi* communication mode is only compatible
+simulations of this kind. The *multi* communication mode is only
-with the *multi* neighbor style. The *multi/old* communication mode is comparable
+compatible with the *multi* neighbor style.
-with both the *multi* and *multi/old* neighbor styles.
 
 The *cutoff* keyword allows you to extend the ghost cutoff distance
 for communication mode *single*, which is the distance from the borders
@@ -108,14 +102,12 @@ simulation to account for potential changes in the number of
 collections.  Custom cutoffs are preserved between runs but if
 collections are redefined, one may want to re-specify the communication
 cutoffs.  For granular pair styles,the default cutoff is set to the sum
-of the current maximum atomic radii for each collection.  The
+of the current maximum atomic radii for each collection.
-*cutoff/multi/old* option is similar to *cutoff/multi* except it
-operates on atom types as opposed to collections.
 
 The *reduce/multi* option applies to *multi* and sets the communication
-cutoff for a particle equal to the maximum interaction distance between particles
+cutoff for a particle equal to the maximum interaction distance between
-in the same collection. This reduces the number of
+particles in the same collection. This reduces the number of ghost atoms
-ghost atoms that need to be communicated. This method is only compatible with the
+that need to be communicated. This method is only compatible with the
 *multi* neighbor style and requires a half neighbor list and Newton on.
 See the :doc:`neighbor multi <neighbor>` command for more information.
 

doc/src/commands_list.rst

@@ -82,6 +82,7 @@ Commands
    read_dump
    read_restart
    region
+   region2vmd
    replicate
    rerun
    reset_atoms

doc/src/compute.rst

@@ -356,6 +356,7 @@ The individual style names on the :doc:`Commands compute <Commands_compute>` pag
 * :doc:`ti <compute_ti>` - thermodynamic integration free energy values
 * :doc:`torque/chunk <compute_torque_chunk>` - torque applied on each chunk
 * :doc:`vacf <compute_vacf>` - velocity auto-correlation function of group of atoms
+* :doc:`vacf/chunk <compute_vacf_chunk>` - velocity auto-correlation for the center of mass velocities of chunks of atoms
 * :doc:`vcm/chunk <compute_vcm_chunk>` - velocity of center-of-mass for each chunk
 * :doc:`viscosity/cos <compute_viscosity_cos>` - velocity profile under cosine-shaped acceleration
 * :doc:`voronoi/atom <compute_voronoi_atom>` - Voronoi volume and neighbors for each atom

doc/src/compute_chunk_atom.rst

@@ -217,13 +217,16 @@ scaled differently in the two different dimensions to transform them
 into ellipses).
 
 The created bins (and hence the chunk IDs) are numbered consecutively
-from 1 to the number of bins = *Nchunk*\ .  For *bin2d* and *bin3d*, the
+from 1 to the number of bins = *Nchunk*\ . For *bin2d* and *bin3d*, the
-numbering varies most rapidly in the first dimension (which could be
+numbering varies fastest in the last dimension (which could be
-*x*, *y*, or *z*), next rapidly in the second dimension, and most slowly in the
+*x*, *y*, or *z*), slower in the second dimension, and slowest in the
-third dimension.  For *bin/sphere*, the bin with smallest radii is chunk
+first dimension. For *bin/sphere*, the bin with smallest radius is chunk
-1 and the bin with largest radii is chunk Nchunk = *ncbin*\ .  For
+1 and the bin with largest radius is chunk Nchunk = *ncbin*\ .  For
-*bin/cylinder*, the numbering varies most rapidly in the dimension
+*bin/cylinder*, the numbering varies faster in the dimension
-along the cylinder axis and most slowly in the radial direction.
+along the cylinder axis and slower in the radial direction.
+In all cases, for a given dimension, the numbering increases
+with increasing value of the coordinate (Cartesian coordinate,
+sphere or cylinder radius, axial position).
 
 Each time this compute is invoked, each atom is mapped to a bin based
 on its current position.  Note that between reneighboring timesteps,

doc/src/compute_cna_atom.rst

@@ -67,7 +67,7 @@ following relation should also be satisfied:
 
 .. math::
 
-  r_c + r_s > 2*{\rm cutoff}
+  r_c + r_s > 2*\mathrm{cutoff}
 
 where :math:`r_c` is the cutoff distance of the potential, :math:`r_s`
 is the skin

doc/src/compute_cnp_atom.rst

@@ -74,7 +74,7 @@ following relation should also be satisfied:
 
 .. math::
 
-  r_c + r_s > 2*{\rm cutoff}
+  r_c + r_s > 2*\mathrm{cutoff}
 
 where :math:`r_c` is the cutoff distance of the potential, :math:`r_s` is
 the skin

doc/src/compute_efield_wolf_atom.rst

@@ -50,9 +50,9 @@ the potential energy using the Wolf summation method, described in
 
 .. math::
    E_i = \frac{1}{2} \sum_{j \neq i}
-   \frac{q_i q_j {\rm erfc}(\alpha r_{ij})}{r_{ij}} +
+   \frac{q_i q_j \mathrm{erfc}(\alpha r_{ij})}{r_{ij}} +
    \frac{1}{2} \sum_{j \neq i}
-   \frac{q_i q_j {\rm erf}(\alpha r_{ij})}{r_{ij}} \qquad r < r_c
+   \frac{q_i q_j \mathrm{erf}(\alpha r_{ij})}{r_{ij}} \qquad r < r_c
 
 where :math:`\alpha` is the damping parameter, and *erf()* and *erfc()*
 are error-function and complementary error-function terms.  This

doc/src/compute_gaussian_grid_local.rst

@@ -30,7 +30,7 @@ Examples
 Description
 """""""""""
 
-.. versionadded:: TBD
+.. versionadded:: 4Feb2025
 
 Define a computation that calculates a Gaussian representation of the ionic
 structure. This representation is used for the efficient evaluation

doc/src/compute_hexorder_atom.rst

@@ -40,7 +40,7 @@ is a complex number (stored as two real numbers) defined as follows:
 
 .. math::
 
-   q_n = \frac{1}{nnn}\sum_{j = 1}^{nnn} e^{n i \theta({\bf r}_{ij})}
+   q_n = \frac{1}{nnn}\sum_{j = 1}^{nnn} e^{n i \theta({\textbf{r}}_{ij})}
 
 where the sum is over the *nnn* nearest neighbors
 of the central atom. The angle :math:`\theta`

doc/src/compute_msd.rst

@@ -116,7 +116,9 @@ Compute *msd* cannot be used with a dynamic group.
 Related commands
 """"""""""""""""
 
-:doc:`compute msd/nongauss <compute_msd_nongauss>`, :doc:`compute displace_atom <compute_displace_atom>`, :doc:`fix store/state <fix_store_state>`, :doc:`compute msd/chunk <compute_msd_chunk>`
+:doc:`compute msd/nongauss <compute_msd_nongauss>`,
+:doc:`compute displace_atom <compute_displace_atom>`, :doc:`fix store/state <fix_store_state>`,
+:doc:`compute msd/chunk <compute_msd_chunk>`
 
 Default
 """""""

doc/src/compute_msd_chunk.rst

@@ -131,7 +131,7 @@ Restrictions
 Related commands
 """"""""""""""""
 
-:doc:`compute msd <compute_msd>`
+:doc:`compute msd <compute_msd>`, :doc:`compute vacf/chunk <compute_vacf_chunk>`
 
 Default
 """""""

doc/src/compute_orientorder_atom.rst

@@ -49,7 +49,7 @@ For each atom, :math:`Q_\ell` is a real number defined as follows:
 
 .. math::
 
-   \bar{Y}_{\ell m} = & \frac{1}{nnn}\sum_{j = 1}^{nnn} Y_{\ell m}\bigl( \theta( {\bf r}_{ij} ), \phi( {\bf r}_{ij} ) \bigr) \\
+   \bar{Y}_{\ell m} = & \frac{1}{nnn}\sum_{j = 1}^{nnn} Y_{\ell m}\bigl( \theta( \mathbf{r}_{ij} ), \phi( \mathbf{r}_{ij} ) \bigr) \\
    Q_\ell  = & \sqrt{\frac{4 \pi}{2 \ell  + 1} \sum_{m = -\ell }^{m = \ell } \bar{Y}_{\ell m} \bar{Y}^*_{\ell m}}
 
 The first equation defines the local order parameters as averages

doc/src/compute_reduce.rst

@@ -87,7 +87,7 @@ values in the vector.  The *sumsq* option sums the square of the
 values in the vector into a global total.  The *avesq* setting does
 the same as *sumsq*, then divides the sum of squares by the number of
 values.  The last two options can be useful for calculating the
-variance of some quantity (e.g., variance = sumsq :math:`-` ave\
+variance of some quantity (e.g., variance = *avesq* :math:`-` *ave*\
 :math:`^2`).  The *sumabs* option sums the absolute values in the
 vector into a global total.  The *aveabs* setting does the same as
 *sumabs*, then divides the sum of absolute values by the number of

doc/src/compute_sna_atom.rst

@@ -139,11 +139,11 @@ mapped on to a third polar angle :math:`\theta_0` defined by,
 
 .. math::
 
-  \theta_0 = {\sf rfac0} \frac{r-r_{min0}}{R_{ii'}-r_{min0}} \pi
+  \theta_0 = \mathsf{rfac0} \frac{r-r_{min0}}{R_{ii'}-r_{min0}} \pi
 
 In this way, all possible neighbor positions are mapped on to a subset
-of the 3-sphere.  Points south of the latitude :math:`\theta_0` =
+of the 3-sphere.  Points south of the latitude
-*rfac0* :math:`\pi` are excluded.
+:math:`\theta_0 = \mathsf{rfac0} \pi` are excluded.
 
 The natural basis for functions on the 3-sphere is formed by the
 representatives of *SU(2)*, the matrices :math:`U^j_{m,m'}(\theta, \phi,
@@ -204,7 +204,7 @@ components summed separately for each LAMMPS atom type:
 
 .. math::
 
-   -\sum_{i' \in I} \frac{\partial {B^{i'}_{j_1,j_2,j}  }}{\partial {\bf r}_i}
+   -\sum_{i' \in I} \frac{\partial {B^{i'}_{j_1,j_2,j}  }}{\partial \mathbf{r}_i}
 
 The sum is over all atoms *i'* of atom type *I*\ .  For each atom *i*,
 this compute evaluates the above expression for each direction, each
@@ -216,7 +216,7 @@ derivatives:
 
 .. math::
 
-  -{\bf r}_i \otimes \sum_{i' \in I} \frac{\partial {B^{i'}_{j_1,j_2,j}}}{\partial {\bf r}_i}
+  -\mathbf{r}_i \otimes \sum_{i' \in I} \frac{\partial {B^{i'}_{j_1,j_2,j}}}{\partial \mathbf{r}_i}
 
 Again, the sum is over all atoms *i'* of atom type *I*\ .  For each atom
 *i*, this compute evaluates the above expression for each of the six

doc/src/compute_stress_atom.rst

@@ -65,7 +65,7 @@ In case of compute *stress/atom*, the virial contribution is:
 
    W_{ab} & = \frac{1}{2} \sum_{n = 1}^{N_p} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b}) + \frac{1}{2} \sum_{n = 1}^{N_b} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b})  \\
   & + \frac{1}{3} \sum_{n = 1}^{N_a} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b} + r_{3_a} F_{3_b}) + \frac{1}{4} \sum_{n = 1}^{N_d} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b} + r_{3_a} F_{3_b} + r_{4_a} F_{4_b}) \\
-  & + \frac{1}{4} \sum_{n = 1}^{N_i} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b} + r_{3_a} F_{3_b} + r_{4_a} F_{4_b}) + {\rm Kspace}(r_{i_a},F_{i_b}) + \sum_{n = 1}^{N_f} r_{i_a} F_{i_b}
+  & + \frac{1}{4} \sum_{n = 1}^{N_i} (r_{1_a} F_{1_b} + r_{2_a} F_{2_b} + r_{3_a} F_{3_b} + r_{4_a} F_{4_b}) + \mathrm{Kspace}(r_{i_a},F_{i_b}) + \sum_{n = 1}^{N_f} r_{i_a} F_{i_b}
 
 The first term is a pairwise energy contribution where :math:`n` loops
 over the :math:`N_p` neighbors of atom :math:`I`, :math:`\mathbf{r}_1`
@@ -97,7 +97,7 @@ In case of compute *centroid/stress/atom*, the virial contribution is:
 .. math::
 
    W_{ab} & = \sum_{n = 1}^{N_p} r_{I0_a} F_{I_b} + \sum_{n = 1}^{N_b} r_{I0_a} F_{I_b} + \sum_{n = 1}^{N_a} r_{I0_a}  F_{I_b} + \sum_{n = 1}^{N_d} r_{I0_a} F_{I_b} + \sum_{n = 1}^{N_i} r_{I0_a} F_{I_b} \\
-  & + {\rm Kspace}(r_{i_a},F_{i_b}) + \sum_{n = 1}^{N_f} r_{i_a} F_{i_b}
+  & + \mathrm{Kspace}(r_{i_a},F_{i_b}) + \sum_{n = 1}^{N_f} r_{i_a} F_{i_b}
 
 As with compute *stress/atom*, the first, second, third, fourth and
 fifth terms are pairwise, bond, angle, dihedral and improper

doc/src/compute_vacf.rst

@@ -76,7 +76,7 @@ Restrictions
 Related commands
 """"""""""""""""
 
-:doc:`compute msd <compute_msd>`
+:doc:`compute msd <compute_msd>`, :doc:`compute vacf/chunk <compute_vacf_chunk>`
 
 Default
 """""""

doc/src/compute_vacf_chunk.rst

@@ -0,0 +1,124 @@
+.. index:: compute vacf/chunk
+
+compute vacf/chunk command
+==========================
+
+Syntax
+""""""
+
+.. code-block:: LAMMPS
+
+   compute ID group-ID vacf/chunk chunkID
+
+* ID, group-ID are documented in :doc:`compute <compute>` command
+* vacf/chunk = style name of this compute command
+* chunkID = ID of :doc:`compute chunk/atom <compute_chunk_atom>` command
+
+Examples
+""""""""
+
+.. code-block:: LAMMPS
+
+   compute 1 all vacf/chunk molchunk
+
+Description
+"""""""""""
+
+.. versionadded:: TBD
+
+Define a computation that calculates the velocity auto-correlation
+function (VACF) for multiple chunks of atoms.
+
+In LAMMPS, chunks are collections of atoms defined by a :doc:`compute
+chunk/atom <compute_chunk_atom>` command, which assigns each atom to a
+single chunk (or no chunk).  The ID for this command is specified as
+chunkID.  For example, a single chunk could be the atoms in a molecule
+or atoms in a spatial bin.  See the :doc:`compute chunk/atom
+<compute_chunk_atom>` and :doc:`Howto chunk <Howto_chunk>` doc pages for
+details of how chunks can be defined and examples of how they can be
+used to measure properties of a system.
+
+Four quantities are calculated by this compute for each chunk.  The
+first 3 quantities are the product of the initial center of mass
+velocity (VCM) for each chunk in *x*, *y*, and *z* direction with the
+current center of mass velocity in the same direction.  The fourth
+component is the total VACF, i.e. the sum of the three components.
+
+Note that only atoms in the specified group contribute to the
+calculation.  The :doc:`compute chunk/atom <compute_chunk_atom>` command
+defines its own group; atoms will have a chunk ID = 0 if they are not in
+that group, signifying they are not assigned to a chunk, and will thus
+also not contribute to this calculation.  You can specify the "all"
+group for this command if you simply want to include atoms with non-zero
+chunk IDs.
+
+The integral of the VACF versus time is proportional to the diffusion
+coefficient of the diffusing chunks.
+
+.. note::
+
+   The number of chunks *Nchunk* calculated by the
+   :doc:`compute chunk/atom <compute_chunk_atom>` command must remain constant
+   each time this compute is invoked, so that the dot product for each chunk
+   from its original position can be computed consistently.  If *Nchunk*
+   does not remain constant, an error will be generated.  If needed, you
+   can enforce a constant *Nchunk* by using the *nchunk once* or *ids once*
+   options when specifying the :doc:`compute chunk/atom <compute_chunk_atom>`
+   command.
+
+.. note::
+
+   This compute stores the original center-of-mass velocities of each
+   chunk.  When a VACF is calculated on a later timestep, it is assumed
+   that the same atoms are assigned to the same chunk ID.  However
+   LAMMPS has no simple way to ensure this is the case, though you can
+   use the *ids once* option when specifying the :doc:`compute
+   chunk/atom <compute_chunk_atom>` command.  Note that if this is not
+   the case, the VACF calculation does not have a sensible meaning.
+
+.. note::
+
+   If you want the quantities calculated by this compute to be
+   continuous when running from a :doc:`restart file <read_restart>`, then
+   you should use the same ID for this compute, as in the original run.
+   This is so that the fix this compute creates to store per-chunk
+   quantities will also have the same ID, and thus be initialized
+   correctly with chunk reference positions from the restart file.
+
+The simplest way to output the results of the compute vacf/chunk
+calculation to a file is to use the :doc:`fix ave/time <fix_ave_time>`
+command, for example:
+
+.. code-block:: LAMMPS
+
+   compute cc1 all chunk/atom molecule
+   compute myChunk all vacf/chunk cc1
+   fix 1 all ave/time 100 1 100 c_myChunk[*] file tmp.out mode vector
+
+Output info
+"""""""""""
+
+This compute calculates a global array where the number of rows = the
+number of chunks *Nchunk* as calculated by the specified :doc:`compute
+chunk/atom <compute_chunk_atom>` command.  The number of columns = 4 for
+the *x*, *y*, *z*, component and the total VACF.  These values can be
+accessed by any command that uses global array values from a compute as
+input.  See the :doc:`Howto output <Howto_output>` page for an overview
+of LAMMPS output options.
+
+The array values are "intensive".  The array values will be in
+distance\ :math:`^2` divided by time\ :math:`^2` :doc:`units <units>`.
+
+Restrictions
+""""""""""""
+ none
+
+Related commands
+""""""""""""""""
+
+:doc:`compute vacf <compute_vacf>`, :doc:`compute msd/chunk <compute_msd_chunk>`
+
+Default
+"""""""
+
+none

doc/src/fitpod_command.rst

@@ -263,10 +263,10 @@ then the globally defined weights from the ``fitting_weight_energy`` and
 POD Potential
 """""""""""""
 
-We consider a multi-element system of *N* atoms with :math:`N_{\rm e}`
+We consider a multi-element system of *N* atoms with :math:`N_\mathrm{e}`
 unique elements.  We denote by :math:`\boldsymbol r_n` and :math:`Z_n`
 position vector and type of an atom *n* in the system,
-respectively. Note that we have :math:`Z_n \in \{1, \ldots, N_{\rm e}
+respectively. Note that we have :math:`Z_n \in \{1, \ldots, N_\mathrm{e}
 \}`, :math:`\boldsymbol R = (\boldsymbol r_1, \boldsymbol r_2, \ldots,
 \boldsymbol r_N) \in \mathbb{R}^{3N}`, and :math:`\boldsymbol Z = (Z_1,
 Z_2, \ldots, Z_N) \in \mathbb{N}^{N}`. The total energy of the

doc/src/fix.rst

@@ -341,6 +341,8 @@ accelerated styles exist.
 * :doc:`phonon <fix_phonon>` - calculate dynamical matrix from MD simulations
 * :doc:`pimd/langevin <fix_pimd>` - Feynman path-integral molecular dynamics with stochastic thermostat
 * :doc:`pimd/nvt <fix_pimd>` - Feynman path-integral molecular dynamics with Nose-Hoover thermostat
+* :doc:`pimd/langevin/bosonic <fix_pimd>` - Bosonic Feynman path-integral molecular dynamics for with stochastic thermostat
+* :doc:`pimd/nvt/bosonic <fix_pimd>` - Bosonic Feynman path-integral molecular dynamics with Nose-Hoover thermostat
 * :doc:`planeforce <fix_planeforce>` - constrain atoms to move in a plane
 * :doc:`plumed <fix_plumed>` - wrapper on PLUMED free energy library
 * :doc:`poems <fix_poems>` - constrain clusters of atoms to move as coupled rigid bodies

doc/src/fix_adapt.rst

@@ -236,6 +236,8 @@ formulas for the meaning of these parameters:
 +------------------------------------------------------------------------------+--------------------------------------------------+-------------+
 | :doc:`wf/cut <pair_wf_cut>`                                                  | epsilon,sigma,nu,mu                              | type pairs  |
 +------------------------------------------------------------------------------+--------------------------------------------------+-------------+
+| :doc:`yukawa <pair_yukawa>`                                                  | alpha                                            | type pairs  |
++------------------------------------------------------------------------------+--------------------------------------------------+-------------+
 
 .. note::
 

doc/src/fix_ave_chunk.rst

@@ -459,8 +459,8 @@ output.  This option can only be used with the *ave running* setting.
 
 The *format* keyword sets the numeric format of each value when it is
 printed to a file via the *file* keyword.  Note that all values are
-floating point quantities.  The default format is %g.  You can specify
+floating point quantities.  The default format is " %g".  You can specify
-a higher precision if desired (e.g., %20.16g).
+a higher precision if desired (e.g., " %20.16g").
 
 The *title1* and *title2* and *title3* keywords allow specification of
 the strings that will be printed as the first three lines of the output

doc/src/fix_ave_correlate.rst

@@ -32,13 +32,14 @@ Syntax
 
   .. parsed-literal::
 
-       *type* arg = *auto* or *upper* or *lower* or *auto/upper* or *auto/lower* or *full*
+       *type* arg = *auto* or *upper* or *lower* or *auto/upper* or *auto/lower* or *full* or *first*
          auto = correlate each value with itself
          upper = correlate each value with each succeeding value
          lower = correlate each value with each preceding value
          auto/upper = auto + upper
          auto/lower = auto + lower
          full = correlate each value with every other value, including itself = auto + upper + lower
+         first = correlate each value with the first value
        *ave* args = *one* or *running*
          one = zero the correlation accumulation every Nfreq steps
          running = accumulate correlations continuously
@@ -257,6 +258,9 @@ time.
 * If *type* is set to *full* then each input value is correlated with
   itself and every other value (i.e., :math:`C_{ij} = V_i V_j` for
   :math:`\{i,j\} = \{1,N\}`, so :math:`N_\text{pair} = N^2`).
+* If *type* is set to *first* then each input value is correlated with
+  the first input value (i.e., :math:`C_{ij} = V_1 V_j` for
+  :math:`\{j\} = \{1,N\}`, so :math:`N_\text{pair} = N`).
 
 The *ave* keyword determines what happens to the accumulation of correlation
 samples every :math:`N_\text{freq}` timesteps.  If the *ave* setting is *one*,
@@ -369,6 +373,8 @@ above.
 * For *type* = *full*, the :math:`N_\text{pair} = N^2` columns are ordered:
   :math:`C_{11}, C_{12}, \dotsc, C_{1N}, C_{21}, C_{22}, \dotsc, C_{2N},
   C_{31}, \dotsc, C_{3N}, \dotsc, C_{N1}, \dotsc, C_{N,N-1}, C_{NN}`
+* For *type* = *first*, the :math:`N_\text{pair} = N` columns are ordered:
+  :math:`C_{11}, C_{12}, \dotsc, C_{1N}`
 
 The array values calculated by this fix are treated as extensive.  If
 you need to divide them by the number of atoms, you must do this in a

doc/src/fix_ave_correlate_long.rst

@@ -31,13 +31,14 @@ Syntax
 
   .. parsed-literal::
 
-       *type* arg = *auto* or *upper* or *lower* or *auto/upper* or *auto/lower* or *full*
+       *type* arg = *auto* or *upper* or *lower* or *auto/upper* or *auto/lower* or *full* or *first*
          auto = correlate each value with itself
          upper = correlate each value with each succeeding value
          lower = correlate each value with each preceding value
          auto/upper = auto + upper
          auto/lower = auto + lower
          full = correlate each value with every other value, including itself = auto + upper + lower
+         first = correlate each value with the first value
        *start* args = Nstart
          Nstart = start accumulating correlations on this time step
        *file* arg = filename

doc/src/fix_ave_time.rst

@@ -304,8 +304,8 @@ output.  This option can only be used with the *ave running* setting.
 
 The *format* keyword sets the numeric format of each value when it is
 printed to a file via the *file* keyword.  Note that all values are
-floating point quantities.  The default format is %g.  You can specify
+floating point quantities.  The default format is " %g".  You can specify
-a higher precision if desired (e.g., %20.16g).
+a higher precision if desired (e.g., " %20.16g").
 
 The *title1* and *title2* and *title3* keywords allow specification of
 the strings that will be printed as the first 2 or 3 lines of the

doc/src/fix_efield_lepton.rst

@@ -40,7 +40,7 @@ Examples
 Description
 """""""""""
 
-.. versionadded:: TBD
+.. versionadded:: 4Feb2025
 
 Add an electric potential :math:`V` that applies to a group of charged atoms a force :math:`\vec{F} = q \vec{E}`,
 and to dipoles a force :math:`\vec{F} = (\vec{p} \cdot \nabla) \vec{E}` and torque :math:`\vec{T} = \vec{p} \times \vec{E}`,

doc/src/fix_eos_table_rx.rst

@@ -49,7 +49,7 @@ computed according to the following relation:
 
 where *m* is the number of species, :math:`c_{i,j}` is the
 concentration of species *j* in particle *i*, :math:`u_j` is the
-internal energy of species j, :math:`\Delta H_{f,j} is the heat of
+internal energy of species j, :math:`\Delta H_{f,j}` is the heat of
 formation of species *j*, N is the number of molecules represented
 by the coarse-grained particle, :math:`k_B` is the Boltzmann constant,
 and :math:`T` is the temperature of the system.  Additionally, it is

doc/src/fix_gld.rst

@@ -60,9 +60,9 @@ With this fix active, the force on the *j*\ th atom is given as
 
 .. math::
 
-   {\bf F}_{j}(t) = & {\bf F}^C_j(t)-\int \limits_{0}^{t} \Gamma_j(t-s) {\bf v}_j(s)~\text{d}s + {\bf F}^R_j(t) \\
+   \mathbf{F}_{j}(t) = & \mathbf{F}^C_j(t)-\int \limits_{0}^{t} \Gamma_j(t-s) \mathbf{v}_j(s)~\text{d}s + \mathbf{F}^R_j(t) \\
    \Gamma_j(t-s) = & \sum \limits_{k=1}^{N_k} \frac{c_k}{\tau_k} e^{-(t-s)/\tau_k} \\
-   \langle{\bf F}^R_j(t),{\bf F}^R_j(s)\rangle = & \text{k$_\text{B}$T} ~\Gamma_j(t-s)
+   \langle\mathbf{F}^R_j(t),\mathbf{F}^R_j(s)\rangle = & \text{k$_\text{B}$T} ~\Gamma_j(t-s)
 
 Here, the first term is representative of all conservative (pairwise,
 bonded, etc) forces external to this fix, the second is the temporally

doc/src/fix_halt.rst

@@ -25,13 +25,14 @@ Syntax
 * operator = "<" or "<=" or ">" or ">=" or "==" or "!=" or "\|\^"
 * avalue = numeric value to compare attribute to
 * zero or more keyword/value pairs may be appended
-* keyword = *error* or *message* or *path*
+* keyword = *error* or *message* or *path* or *universe*
 
   .. parsed-literal::
 
        *error* value = *hard* or *soft* or *continue*
        *message* value = *yes* or *no*
        *path* value = path to check for free space (may be in quotes)
+       *universe* value = *yes* or *no*
 
 
 Examples
@@ -40,8 +41,10 @@ Examples
 .. code-block:: LAMMPS
 
    fix 10 all halt 1 bondmax > 1.5
-   fix 10 all halt 10 v_myCheck != 0 error soft
+   fix 10 all halt 10 v_myCheck != 0 error soft message no
    fix 10 all halt 100 diskfree < 100000.0 path "dump storage/."
+   fix  2 all halt 100 v_curtime > ${maxtime} universe yes
+
 
 Description
 """""""""""
@@ -141,33 +144,52 @@ The optional *error* keyword determines how the current run is halted.
 If its value is *hard*, then LAMMPS will stop with an error message.
 
 If its value is *soft*, LAMMPS will exit the current run, but continue
-to execute subsequent commands in the input script.  However,
+to execute subsequent commands in the input script.  However, additional
-additional :doc:`run <run>` or :doc:`minimize <minimize>` commands will be
+:doc:`run <run>` or :doc:`minimize <minimize>` commands will be skipped.
-skipped.  For example, this allows a script to output the current
+For example, this allows a script to output the current state of the
-state of the system, e.g. via a :doc:`write_dump <write_dump>` or
+system, e.g. via a :doc:`write_dump <write_dump>` or :doc:`write_restart
-:doc:`write_restart <write_restart>` command.
+<write_restart>` command.  To re-enable regular runs after *fix halt*
+stopped a run, you need to issue a :doc:`timer timeout unlimited
+<timer>` command.
 
 If its value is *continue*, the behavior is the same as for *soft*,
 except subsequent :doc:`run <run>` or :doc:`minimize <minimize>` commands
 are executed.  This allows your script to remedy the condition that
-triggered the halt, if necessary.  Note that you may wish use the
+triggered the halt, if necessary.  This is the equivalent of stopping
-:doc:`unfix <unfix>` command on the fix halt ID, so that the same
+with *error soft* and followed by :doc:`timer timeout unlimited
-condition is not immediately triggered in a subsequent run.
+<timer>` command.  This can have undesired consequences, when a
+:doc:`run command <run>` uses the *every* keyword, so using *error soft*
+and resetting the timer manually may be the preferred option.
+
+You may wish use the :doc:`unfix <unfix>` command on the *fix halt* ID
+before starting a subsequent run, so that the same condition is not
+immediately triggered again.
 
 The optional *message* keyword determines whether a message is printed
 to the screen and logfile when the halt condition is triggered.  If
 *message* is set to yes, a one line message with the values that
-triggered the halt is printed.  If *message* is set to no, no message
+triggered the halt is printed.  If *message* is set to no, no message is
-is printed; the run simply exits.  The latter may be desirable for
+printed; the run simply exits.  The latter may be desirable for
 post-processing tools that extract thermodynamic information from log
 files.
 
+.. versionadded:: TBD
+
+The optional *universe* keyword determines whether the halt request
+should be synchronized across the partitions of a :doc:`multi-partition
+run <Run_options>`.  If *universe* is set to yes, fix halt will check if
+there is a specific message received from any of the other partitions
+requesting to stop the run on this partition as well.  Consequently, if
+fix halt determines to halt the simulation, the fix will send messages
+to all other partitions so they stop their runs, too.
+
 Restart, fix_modify, output, run start/stop, minimize info
 """""""""""""""""""""""""""""""""""""""""""""""""""""""""""
 
-No information about this fix is written to :doc:`binary restart files <restart>`.  None of the :doc:`fix_modify <fix_modify>` options
+No information about this fix is written to :doc:`binary restart files
-are relevant to this fix.  No global or per-atom quantities are stored
+<restart>`.  None of the :doc:`fix_modify <fix_modify>` options are
-by this fix for access by various :doc:`output commands <Howto_output>`.
+relevant to this fix.  No global or per-atom quantities are stored by
+this fix for access by various :doc:`output commands <Howto_output>`.
 No parameter of this fix can be used with the *start/stop* keywords of
 the :doc:`run <run>` command.
 
@@ -183,4 +205,4 @@ Related commands
 Default
 """""""
 
-The option defaults are error = soft, message = yes, and path = ".".
+The option defaults are error = soft, message = yes, path = ".", and universe = no.

doc/src/fix_hyper_global.rst

@@ -131,14 +131,15 @@ timesteps is simply
    t_{hyper} = \sum_{i=1,N} B-i \cdot dt
 
 where *dt* is the timestep size defined by the :doc:`timestep <timestep>`
-command.  The effective time acceleration due to GHD is thus t_hyper /
+command.  The effective time acceleration due to GHD is thus
-N\*dt, where N\*dt is elapsed time for a normal MD run of N timesteps.
+:math:`t_{hyper} / N * dt`, where N\*dt is elapsed time for a normal MD run
+of N timesteps.
 
-Note that in GHD, the boost factor varies from timestep to timestep.
+Note that in GHD, the boost factor varies from timestep to timestep.  Likewise,
-Likewise, which bond has :math:`E^{max}` strain and thus which pair of
+which bond has :math:`E^{max}` strain and thus which pair of atoms the bias
-atoms the bias potential is added to, will also vary from timestep to timestep.
+potential is added to, will also vary from timestep to timestep.  This is in
-This is in contrast to local hyperdynamics (LHD) where the boost
+contrast to local hyperdynamics (LHD) where the boost factor is an input
-factor is an input parameter; see the :doc:`fix hyper/local <fix_hyper_local>` page for details.
+parameter; see the :doc:`fix hyper/local <fix_hyper_local>` page for details.
 
 ----------
 
@@ -178,7 +179,7 @@ time-accurate trajectory of the system.
 
 Note that if *Vmax* is set too small, the GHD simulation will run
 correctly.  There will just be fewer events because the hyper time
-(t_hyper equation above) will be shorter.
+(:math:`t_{hyper}` equation above) will be shorter.
 
 .. note::
 

doc/src/fix_hyper_local.rst

@@ -111,7 +111,7 @@ requirement, and thus a bias potential :math:`V^{max}_{ij}` will be
 applied to many bonds on the same timestep.
 
 In LHD, all bonds store a :math:`C_{ij}` prefactor which appears in
-the :math:`V^{max}_{ij}` and :math:`F^{max}_{ij}equations above.  Note
+the :math:`V^{max}_{ij}` and :math:`F^{max}_{ij}` equations above.  Note
 that the :math:`C_{ij}` factor scales the strength of the bias energy
 and forces whenever bond *ij* is the maximum strain bond in its neighborhood.
 
@@ -269,7 +269,7 @@ inverse of the alpha parameter discussed in
 
 The *Btarget* argument is the desired time boost factor (a value > 1)
 that all the atoms in the system will experience.  The elapsed time
-t_hyper for an LHD simulation running for *N* timesteps is simply
+:math:`t_{hyper}` for an LHD simulation running for *N* timesteps is simply
 
 .. math::
 
@@ -294,7 +294,7 @@ is the specified temperature of the system
 
 Note that if *Btarget* is set smaller than this, the LHD simulation
 will run correctly.  There will just be fewer events because the hyper
-time (t_hyper equation above) will be shorter.
+time (:math:`t_{hyper}` equation above) will be shorter.
 
 .. note::
 

doc/src/fix_imd.rst

@@ -120,7 +120,7 @@ with different units or as a measure to tweak the forces generated by
 the manipulation of the IMD client, this option allows to make
 adjustments.
 
-.. versionadded:: TBD
+.. versionadded:: 4Feb2025
 
 In `IMDv3 <IMDv3_>`_, the IMD protocol has been extended to allow for
 the transmission of simulation time, box dimensions, atomic coordinates,

doc/src/fix_lb_fluid.rst

@@ -130,7 +130,7 @@ calculated as:
 
 .. math::
 
-   {\bf F}_{j \alpha} = \gamma \left({\bf v}_n - {\bf u}_f \right) \zeta_{j\alpha}
+   \mathbf{F}_{j \alpha} = \gamma \left(\mathbf{v}_n - \mathbf{u}_f \right) \zeta_{j\alpha}
 
 where :math:`\mathbf{v}_n` is the velocity of the MD particle,
 :math:`\mathbf{u}_f` is the fluid velocity interpolated to the particle