#===========================================================================#
# Drag force on a single sphere.                                            #
#                                                                           #
# Here, gamma (used in the calculation of the particle-fluid interaction    #
#   force) is set by the user (gamma = 13.0 for this simulation.)  This     #
#   type of simulation is used to calibrate the value for gamma which will  #
#   give the desired Stokes drag force.                                     #
#                                                                           #
# Sample output from this run can be found in the file:                     # 
#   'setgamma13d0_drag.out'                                                 #
#===========================================================================# 

units          micro
dimension      3
boundary       p p f
atom_style     atomic

#----------------------------------------------------------------------------
# Need a neighbor bin size smaller than the lattice-Boltzmann grid spacing
#   to ensure that the particles belonging to a given processor remain inside
#   that processors lattice-Boltzmann grid.
# The arguments for neigh_modify have been set to "delay 0 every 1", again
#   to ensure that the particles belonging to a given processor remain inside
#   that processors lattice-Boltzmann grid.  However, these values can likely
#   be somewhat increased without issue.  If a problem does arise (a particle
#   is outside of its processors LB grid) an error message is printed and 
#   the simulation is terminated.  
#----------------------------------------------------------------------------
neighbor       1.0 bin
neigh_modify   delay 0 every 1

read_data      data.one_radius16d2

#----------------------------------------------------------------------------
# None of the particles comprising the spherical colloidal object should
#   interact with one another.
#----------------------------------------------------------------------------
pair_style	lj/cut 2.45
pair_coeff	* * 0.0 0.0 2.45
neigh_modify    exclude type 1 1 

mass * 1.0
timestep 4.0

velocity all set 0.0 0.0001 0.0 units box

#---------------------------------------------------------------------------
# Create a lattice-Boltzmann fluid covering the simulation domain.
# All of the particles in the simulation apply a force to the fluid.
# Use the LB integration scheme of Ollila et. al. (for stability reasons,
#   this integration scheme should be used when a large user set value for 
#   gamma is specified), a fluid density = 1.0, fluid viscosity = 1.0, value 
#   for gamma=13.0, lattice spacing dx=4.0, and mass unit, dm=10.0.
# Print the force and torque acting on the particle to the screen at each 
#   timestep.
#----------------------------------------------------------------------------
fix	1 all lb/fluid 1 2 1.0 1.0 setGamma 13.0 dx 4.0 dm 10.0 calcforce 10 all 

#---------------------------------------------------------------------------
# For this simulation the colloidal particle moves at a constant velocity
#   through the fluid.  As such, we do not wish to apply the force from
#   the fluid back onto the object.  Therefore, we do not use any of the
#   viscous_lb, rigid_pc_sphere, or pc fixes, and simply integrate the 
#   particle motion using one of the built-in LAMMPS integrators.
#---------------------------------------------------------------------------
fix     2 all nve

run	100000