neighbor list selection tuning bugfix from Stan

also consistently use memory->destroy() and memory->create()
and not mix it with memory->sfree() and memory->smalloc()

.github/CODEOWNERS

@@ -71,10 +71,7 @@ src/EXTRA-COMMAND/group_ndx.*       @akohlmey
 src/EXTRA-COMMAND/ndx_group.*       @akohlmey
 src/EXTRA-COMPUTE/compute_stress_mop*.* @RomainVermorel
 src/EXTRA-COMPUTE/compute_born_matrix.* @Bibobu @athomps
-src/EXTRA-DUMP/dump_extxyz.*          @fxcoudert
 src/EXTRA-FIX/fix_deform_pressure.* @jtclemm
-src/EXTRA-PAIR/pair_dispersion_d3.* @soniasolomoni @arthurfl
-src/EXTRA-PAIR/d3_parameters.h      @soniasolomoni @arthurfl
 src/MISC/*_tracker.*                @jtclemm
 src/MC/fix_gcmc.*                   @athomps
 src/MC/fix_sgcmc.*                  @athomps
@@ -104,8 +101,7 @@ src/group.*               @sjplimp
 src/improper.*            @sjplimp
 src/info.*                @akohlmey
 src/kspace.*              @sjplimp
-src/lmptype.h             @sjplimp
-src/label_map.*           @jrgissing @akohlmey
+src/lmptyp.h              @sjplimp
 src/library.*             @sjplimp @akohlmey
 src/main.cpp              @sjplimp
 src/min_*.*               @sjplimp

.github/release_steps.md

@@ -1,370 +0,0 @@
-# LAMMPS Release Steps
-
-The following notes chronicle the current steps for preparing and
-publishing LAMMPS releases.  For definitions of LAMMPS versions and
-releases, please refer to [the corresponding section in the LAMMPS
-manual](https://docs.lammps.org/Manual_version.html).
-
-## LAMMPS Feature Release
-
-A LAMMPS feature release is currently prepared after about 500 to 750
-commits to the 'develop' branch or after a period of four weeks up to
-two months.  This is not a fixed rule, though, since external
-circumstances can cause delays in preparing a release, or pull requests
-that are desired to be merged for the release are not yet completed.
-
-### Preparing a 'next\_release' branch
-
-Create a 'next\_release' branch off 'develop' and make the following changes:
-
-- set the LAMMPS\_VERSION define to the planned release date in
-  src/version.h in the format "D Mmm YYYY" or "DD Mmm YYYY"
-- remove the LAMMPS\_UPDATE define in src/version.h
-- update the release date in doc/lammps.1
-- update all TBD arguments for ..versionadded::, ..versionchanged::
-  ..deprecated:: to the planned release date in the format "DMmmYYYY" or
-  "DDMmmYYYY"
-- check release notes for merged new features and check if
-  ..versionadded:: or ..versionchanged:: are missing and need to be
-  added
-
-Submit this pull request.  This is the last pull request merged for the
-release and should not contain any other changes. (Exceptions: this
-document, last minute trivial(!) changes).
-
-This PR shall not be merged before **all** pending tests have completed
-and cleared.  We currently use a mix of automated tests running on
-either Temple's Jenkins cluster or GitHub workflows.  Those include time
-consuming tests not run on pull requests.  If needed, a bug-fix pull
-request should be created and merged to clear all tests.
-
-### Create release on GitHub
-
-When all pending pull requests for the release are merged and have
-cleared testing, the 'next\_release' branch is merged into 'develop'.
-
-Check out or update the 'develop' branch locally, pull the latest
-changes, merge them into 'release' with a fast forward(!) merge, and
-apply a suitable release tag (for historical reasons the tag starts with
-"patch_" followed by the date, and finally push everything back to
-GitHub.  There should be no commits made to 'release' but only
-fast forward merges.  Example:
-
-```
-git checkout develop
-git pull
-git checkout release
-git pull
-git merge --ff-only develop
-git tag -s -m "LAMMPS feature release 4 February 2025" patch_4Feb2025
-git push git@github.com:lammps/lammps.git --tags develop release
-```
-
-Applying this tag will trigger two actions on the Temple Jenkins cluster:
-- The online manual at https://docs.lammps.org/ will be updated to the
-  state of the 'release' branch.  Merges to the 'develop' branch will
-  trigger updating https://docs.lammps.org/latest/ so by reviewing the
-  version of the manual under the "latest" URL, it is possible to preview
-  what the updated release documentation will look like.
-- A downloadable tar archive of the LAMMPS distribution that includes the
-  html format documentation and a PDF of the manual will be created and
-  uploaded to the download server at https://download.lammps.org/tars
-  Note that the file is added, but the `index.html` file is not updated,
-  so it is not yet publicly visible.
-
-Go to https://github.com/lammps/lammps/releases and create a new (draft)
-release page with a summary of all the changes included and references
-to the pull requests they were merged from or check the existing draft
-for any necessary changes from pull requests that were merged but are
-not listed.  Then select the applied tag for the release in the "Choose
-a tag" drop-down list. Go to the bottom of the list and select the "Set
-as pre-release" checkbox.  The "Set as the latest release" button is
-reserved for stable releases and updates to them.
-
-If everything is in order, you can click on the "Publish release"
-button.  Otherwise, click on "Save draft" and finish pending tasks until
-you can return to edit the release page and publish it.
-
-### Prepare pre-compiled packages, update packages to GitHub
-
-A suitable build environment is provided with the
-https://download.lammps.org/static/fedora41_musl_mingw.sif container
-image.  The corresponding container build definition file is maintained
-in the tools/singularity folder of the LAMMPS source distribution.
-
-#### Fully portable static Linux x86_64 non-MPI binaries
-
-The following commands use the Fedora container to build a fully static
-LAMMPS installation using a musl-libc cross-compiler, install it into a
-`lammps-static` folder, and create a tarball called
-`lammps-linux-x86_64-4Feb2025.tar.gz` (or using a corresponding date
-with a future release) from the `lammps-static` folder.
-
-``` sh
-rm -rf release-packages
-mkdir release-packages
-cd release-packages
-wget https://download.lammps.org/static/fedora41_musl.sif
-apptainer shell fedora41_musl.sif
-git clone -b release --depth 10 https://github.com/lammps/lammps.git lammps-release
-cmake -S lammps-release/cmake -B build-release -G Ninja -D CMAKE_INSTALL_PREFIX=$PWD/lammps-static -D CMAKE_TOOLCHAIN_FILE=/usr/musl/share/cmake/linux-musl.cmake -C lammps-release/cmake/presets/most.cmake -C lammps-release/cmake/presets/kokkos-openmp.cmake -D DOWNLOAD_POTENTIALS=OFF -D BUILD_MPI=OFF -D BUILD_TESTING=OFF -D CMAKE_BUILD_TYPE=Release -D PKG_ATC=ON -D PKG_AWPMD=ON -D PKG_MANIFOLD=ON -D PKG_MESONT=ON -D PKG_MGPT=ON -D PKG_ML-PACE=ON -D PKG_ML-RANN=ON -D PKG_MOLFILE=ON -D PKG_PTM=ON -D PKG_QTB=ON -D PKG_SMTBQ=ON
-cmake --build build-release --target all
-cmake --build build-release --target install
-/usr/musl/bin/x86_64-linux-musl-strip lammps-static/bin/*
-tar -czvvf ../lammps-linux-x86_64-4Feb2025.tar.gz lammps-static
-exit # fedora 41 container
-cd ..
-```
-
-The resulting tar archive can be uploaded to the GitHub release page with:
-
-``` sh
-gh release upload patch_4Feb2025 lammps-linux-x86_64-4Feb2025.tar.gz
-```
-
-#### Linux x86_64 Flatpak bundle with GUI included
-
-Make sure you have the `flatpak` and `flatpak-builder` packages
-installed locally (they require binaries that run with elevated
-privileges and thus cannot be used from the container) and build a
-LAMMPS and LAMMPS-GUI flatpak bundle in the `release-packages` folder
-with:
-
-``` sh
-cd release-packages
-flatpak --user remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
-flatpak-builder  --force-clean --verbose --repo=$PWD/flatpak-repo --install-deps-from=flathub --state-dir=$PWD --user --ccache --default-branch=release flatpak-build lammps-release/tools/lammps-gui/org.lammps.lammps-gui.yml
-flatpak build-bundle --runtime-repo=https://flathub.org/repo/flathub.flatpakrepo --verbose $PWD/flatpak-repo ../LAMMPS-Linux-x86_64-GUI-4Feb2025.flatpak org.lammps.lammps-gui release
-cd ..
-```
-
-The resulting flatpak bundle file can be uploaded to the GitHub release page with:
-
-``` sh
-gh release upload patch_4Feb2025 LAMMPS-Linux-x86_64-GUI-4Feb2025.flatpak
-```
-
-#### LAMMPS Source tarball
-
-The container for the static binary can also be used to prepare the source
-tarball including the HTML and PDF manual (this is currently done automatically
-when the releases is created and the tarball uploaded to https://download.lammps.org/tars/).
-The steps are as follows:
-
-``` sh
-cd release-packages
-apptainer shell fedora41_musl_mingw.sif
-cd lammps-release
-rm -f ../release.tar*
-git archive --output=../release.tar --prefix=lammps-4Feb2025/ HEAD
-cd doc
-make clean-all
-make html pdf
-tar -rf ../../release.tar --transform 's,^,lammps-4Feb2025/doc/,' html Manual.pdf
-gzip -9v ../../release.tar
-mv ../../release.tar.gz ../../lammps-src-4Feb2025.tar.gz
-exit # fedora41 container
-cd ..
-```
-
-The resulting source tarball can be uploaded to the GitHub release page with:
-
-``` sh
-gh release upload patch_4Feb2025 lammps-src-4Feb2025.tar.gz
-```
-
-#### Build Windows Installer Packages with MinGW Linux-to-Windows Cross-compiler
-
-The various Windows installer packages can also be built with
-apptainer container image.
-
-``` sh
-cd release-packages
-apptainer shell fedora41_musl_mingw.sif
-git clone --depth 10 https://github.com/lammps/lammps-packages.git lammps-packages
-cd lammps-packages/mingw-cross
-ln -sf ../../lammps-release lammps
-./buildall.sh release >& mk.log & less +F mk.log
-```
-
-The installer with the GUI included can be uploaded to the GitHub release page with:
-
-``` sh
-ln -sf LAMMPS-64bit-GUI-4Feb2025.exe LAMMPS-Win10-64bit-GUI-4Feb2025.exe
-gh release upload patch_4Feb2025 LAMMPS-Win10-64bit-GUI-4Feb2025.exe
-```
-
-The symbolic link is used to have a consistent naming scheme for the packages
-attached to the GitHub release page.
-
-#### Clean up:
-
-``` sh
-cd ..
-rm -r release-packages
-```
-
-#### Build Multi-arch App-bundle for macOS
-
-Building app-bundles for macOS is not as easily automated and portable
-as some of the other steps.  It requires a machine actually running
-macOS.  In that machine the Xcode compiler package needs to be
-installed. This also includes tools for building and manipulating disk
-images.  This compiler supports building executables for both, the
-x86_64 and the arm64 architectures.  This requires building with CMake
-and using the CMake settings:
-
-``` sh
--D CMAKE_OSX_ARCHITECTURES=arm64;x86_64
--D CMAKE_OSX_DEPLOYMENT_TARGET=11.0
-```
-
-This will add the compiler flags `-arch arm64 -arch x86_64
--mmacosx-version-min=11.0` and thus produce object for both
-architectures and support for macOS versions back to version 11 (aka Big
-Sur).  With these settings the following libraries should be compiled
-and installed (e.g. to `$HOME/.local`) as static libraries only:
-- libomp taken from the LLVM/Clang source distribution (to support OpenMP)
-- jpeg
-- zlib
-- png
-- Qt (for LAMMPS-GUI)
-
-When configuring LAMMPS the `cmake/presets/clang.cmake` should be used
-and as many packages as possible enabled. For LAMMPS-GUI, MPI should be
-disabled with `-D BUILD_MPI=OFF` and LAMMPS-GUI enabled with 
-`-D BUILD_LAMMPS_GUI=ON`.  If the CMake configuration is successful,
-settings for building a macOS app-bundle are enabled and with `cmake
---build build --target dmg` extra steps will be executed that will build
-a macOS application installer image under the name
-`LAMMPS_GUI-macOS-multiarch-4Feb2025.dmg`
-
-The application image can be uploaded to the GitHub release page with:
-
-``` sh
-ln -sf LAMMPS_GUI-macOS-multiarch-4Feb2025.dmg LAMMPS-macOS-multiarch-GUI-4Feb2025.dmg
-gh release upload patch_4Feb2025 LAMMPS-macOS-multiarch-GUI-4Feb2025.dmg
-```
-
-The symbolic link is used to have a consistent naming scheme for the packages
-attached to the GitHub release page.
-
-We are currently building the application images on macOS 12 (aka Monterey).
-
-#### Build Linux x86_64 binary tarball on Ubuntu 20.04LTS
-
-While the flatpak Linux version uses portable runtime libraries provided
-by the flatpak environment, we also build regular Linux executables that
-use a wrapper script and matching shared libraries in a tarball.  To be
-compatible with many Linux distributions, one has to build this on a
-very old Linux distribution, since most Linux system libraries are
-usually backward compatible but not forward compatible.  This is
-currently done on an Ubuntu 20.04LTS system. Once LAMMPS moves to
-require CMake 3.20 and C++17, we will have to move to Ubuntu 22.04LTS.
-This installation (either on a real or a virtual machine) should have
-the packages installed that are indicated in
-`tools/singularity/ubuntu20.04.def` plus Qt version 5.x with development
-headers, so that LAMMPS-GUI can be compiled.
-
-Also the building of the binary tarball and setup of the bundled
-libraries and wrapper scripts is automated and can executed with `cmake
---build build --target tgz`.  This should produce a file
-`LAMMPS_GUI-Linux-amd64-4Feb2025.tar.gz` which can be uploaded to the
-GitHub release page with:
-
-``` sh
-ln -sf LAMMPS_GUI-Linux-amd64-4Feb2025.tar.gz LAMMPS-Linux-x86_64-GUI-4Feb2025.tar.gz
-gh release upload patch_4Feb2025 LAMMPS-Linux-x86_64-GUI-4Feb2025.tar.gz
-```
-
-### Update download page on LAMMPS website
-
-Check out the LAMMPS website repo
-https://github.com/lammps/lammps-website.git and edit the file
-`src/download.txt` for the new release.  Test translation with `make
-html` and review `html/download.html` Then add and commit to git and
-push the changes to GitHub.  The Temple Jenkis cluster will
-automatically update https://www.lammps.org/download.html accordingly.
-
-Also notify Steve of the release so he can update `src/bug.txt` on the
-website from the available release notes.
-
-## LAMMPS Stable Release
-
-A LAMMPS stable release is prepared about once per year in the months
-July, August, or September.  One (or two, if needed) feature releases
-before the stable release shall contain only bug fixes or minor feature
-updates in optional packages.  Also substantial changes to the core of
-the code shall be applied rather toward the beginning of a development
-cycle between two stable releases than toward the end.  The intention is
-to stablilize significant change to the core and have outside users and
-developers try them out during the development cycle; the sooner the
-changes are included, the better chances for spotting peripheral bugs
-and issues.
-
-### Prerequesites
-
-Before making a stable release all remaining backported bugfixes shall
-be released as a (final) stable update release (see below).
-
-A LAMMPS stable release process starts like a feature release (see
-above), only that this feature release is called a "Stable Release
-Candidate" and no assets are uploaded to GitHub.
-
-### Synchronize 'maintenance' branch with 'release'
-
-The state of the 'release' branch is then transferred to the
-'maintenance' branch (which will have diverged significantly from
-'release' due to the selectively backported bug fixes).
-
-### Fast-forward merge of 'maintenance' into 'stable' and apply tag
-
-At this point it should be possible to do a fast-forward merge of
-'maintenance' to 'stable' and then apply the stable\_DMmmYYYY tag.
-
-### Push branches and tags
-
-## LAMMPS Stable Update Release
-
-After making a stable release, bugfixes from the 'develop' branch
-are selectively backported to the 'maintenance' branch.  This is
-done with "git cherry-pick \<commit hash\>' wherever possible.
-The LAMMPS\_UPDATE define in "src/version.h" is set to "Maintenance".
-
-### Prerequesites
-
-When a sufficient number of bugfixes has accumulated or an urgent
-or important bugfix needs to be distributed a new stable update
-release is made.  To make this publicly visible a pull request
-is submitted that will merge 'maintenance' into 'stable'.  Before
-merging, set LAMMPS\_UPDATE in "src/version.h" to "Update #" with
-"#" indicating the update count (1, 2, and so on).
-Also draft suitable release notes under https://github.com/lammps/lammps/releases
-
-### Fast-forward merge of 'maintenance' into 'stable', apply tag, and publish
-
-Do a fast-forward merge of 'maintenance' to 'stable' and then
-apply the stable\_DMmmYYYY\_update# tag and push branch and tag
-to GitHub. The corresponding pull request will be automatically
-closed.   Example:
-
-```
-git checkout maintenance
-git pull
-git checkout stable
-git pull
-git merge --ff-only maintenance
-git tag -s -m 'Update 2 for Stable LAMMPS version 29 August 2024' stable_29Aug2024_update2
-git push git@github.com:lammps/lammps.git --tags maintenance stable
-```
-
-Associate draft release notes with new tag and publish as "latest release".
-
-On https://ci.lammps.org/ go to "dev", "stable" and manually execute
-the "update\_release" task. This will update https://docs.lammps.org/stable
-and prepare a stable tarball.
-
-### Build and upload binary packages and source tarball to GitHub
-
-The build procedure is the same as for the feature releases, only
-that packages are built from the 'stable' branch.

.github/workflows/check-cpp23.yml

@@ -1,92 +0,0 @@
-# GitHub action to build LAMMPS on Linux with gcc and C++23
-name: "Check for C++23 Compatibility"
-
-on:
-  push:
-    branches:
-      - develop
-  pull_request:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-jobs:
-  build:
-    name: Build with C++23 support enabled
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache \
-                                libeigen3-dev \
-                                libcurl4-openssl-dev \
-                                mold \
-                                mpi-default-bin \
-                                mpi-default-dev \
-                                ninja-build \
-                                python3-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-cpp23-ccache-${{ github.sha }}
-        restore-keys: linux-cpp23-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install numpy
-        python3 -m pip install pyyaml
-        cmake -S cmake -B build \
-              -C cmake/presets/most.cmake \
-              -C cmake/presets/kokkos-openmp.cmake \
-              -D CMAKE_CXX_STANDARD=23 \
-              -D CMAKE_CXX_COMPILER=g++ \
-              -D CMAKE_C_COMPILER=gcc \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_BUILD_TYPE=Debug \
-              -D CMAKE_CXX_FLAGS_DEBUG="-Og -g" \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D BUILD_MPI=on \
-              -D BUILD_SHARED_LIBS=on \
-              -D BUILD_TOOLS=off \
-              -D ENABLE_TESTING=off \
-              -D MLIAP_ENABLE_ACE=on \
-              -D MLIAP_ENABLE_PYTHON=off \
-              -D PKG_AWPMD=on \
-              -D PKG_GPU=on \
-              -D GPU_API=opencl \
-              -D PKG_KOKKOS=on \
-              -D PKG_LATBOLTZ=on \
-              -D PKG_MDI=on \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=off \
-              -D PKG_MOLFILE=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s

.github/workflows/check-vla.yml

@@ -1,89 +0,0 @@
-# GitHub action to build LAMMPS on Linux with gcc and -Werror=vla
-name: "Check for Variable Length Arrays"
-
-on:
-  push:
-    branches:
-      - develop
-  pull_request:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-jobs:
-  build:
-    name: Build with -Werror=vla
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache \
-                                libeigen3-dev \
-                                libcurl4-openssl-dev \
-                                mold \
-                                mpi-default-bin \
-                                mpi-default-dev \
-                                ninja-build \
-                                python3-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-vla-ccache-${{ github.sha }}
-        restore-keys: linux-vla-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install numpy
-        python3 -m pip install pyyaml
-        cmake -S cmake -B build \
-              -C cmake/presets/most.cmake \
-              -D CMAKE_CXX_COMPILER=g++ \
-              -D CMAKE_C_COMPILER=gcc \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_BUILD_TYPE=Debug \
-              -D CMAKE_CXX_FLAGS_DEBUG="-Og -g -Werror=vla" \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D BUILD_MPI=on \
-              -D BUILD_SHARED_LIBS=off \
-              -D BUILD_TOOLS=off \
-              -D ENABLE_TESTING=off \
-              -D MLIAP_ENABLE_ACE=on \
-              -D MLIAP_ENABLE_PYTHON=off \
-              -D PKG_AWPMD=on \
-              -D PKG_GPU=on \
-              -D GPU_API=opencl \
-              -D PKG_LATBOLTZ=on \
-              -D PKG_MDI=on \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=on \
-              -D PKG_MOLFILE=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s

.github/workflows/compile-msvc.yml

@@ -1,5 +1,5 @@
-# GitHub action to test LAMMPS on Windows with Visual C++
-name: "Windows Unit Tests"
+# GitHub action to build LAMMPS on Windows with Visual C++
+name: "Native Windows Compilation and Unit Tests"
 
 on:
   push:
@@ -11,17 +11,11 @@ on:
 
   workflow_dispatch:
 
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
 jobs:
   build:
     name: Windows Compilation Test
     if: ${{ github.repository == 'lammps/lammps' }}
     runs-on: windows-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
 
     steps:
     - name: Checkout repository
@@ -29,41 +23,36 @@ jobs:
       with:
         fetch-depth: 2
 
-    - name: Enable MSVC++
-      uses: lammps/setup-msvc-dev@v3
-      with:
-        arch: x64
-
-    - name: Install Ccache
-      run: |
-        choco install ccache ninja -y
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: win-unit-ccache-${{ github.sha }}
-        restore-keys: win-unit-ccache-
-
     - name: Select Python version
       uses: actions/setup-python@v5
       with:
         python-version: '3.11'
 
     - name: Building LAMMPS via CMake
+      shell: bash
       run: |
-        ccache -z
         python3 -m pip install numpy
         python3 -m pip install pyyaml
-        cmake -C cmake\presets\windows.cmake -D CMAKE_CXX_COMPILER=cl -D CMAKE_CXX_COMPILER_LAUNCHER=ccache -D CMAKE_C_COMPILER=cl -D CMAKE_C_COMPILER_LAUNCHER=ccache -D CMAKE_Fortran_COMPILER="" -D DOWNLOAD_POTENTIALS=off -D PKG_PYTHON=on -D WITH_PNG=off -D WITH_JPEG=off -S cmake -B build -D BUILD_SHARED_LIBS=on -D ENABLE_TESTING=on -D CMAKE_BUILD_TYPE=Release -G Ninja
-        cmake --build build
-        ccache -s
+        nuget install MSMPIsdk
+        nuget install MSMPIDIST
+        cmake -C cmake/presets/windows.cmake \
+              -D DOWNLOAD_POTENTIALS=off \
+              -D PKG_PYTHON=on \
+              -D WITH_PNG=off \
+              -D WITH_JPEG=off \
+              -S cmake -B build \
+              -D BUILD_SHARED_LIBS=on \
+              -D LAMMPS_EXCEPTIONS=on \
+              -D ENABLE_TESTING=on
+        cmake --build build --config Release --parallel 2
 
     - name: Run LAMMPS executable
+      shell: bash
       run: |
-        build\lmp.exe -h
-        build\lmp.exe -in bench\in.lj
+        ./build/Release/lmp.exe -h
+        ./build/Release/lmp.exe -in bench/in.lj
 
     - name: Run Unit Tests
       working-directory: build
-      run: ctest -V -E FixTimestep:python_move_nve
+      shell: bash
+      run: ctest -V -C Release -E FixTimestep:python_move_nve

.github/workflows/coverity.yml

@@ -67,6 +67,7 @@ jobs:
         -D PKG_MANIFOLD=on \
         -D PKG_MDI=on \
         -D PKG_MGPT=on \
+        -D PKG_ML-PACE=on \
         -D PKG_ML-RANN=on \
         -D PKG_MOLFILE=on \
         -D PKG_NETCDF=on \

.github/workflows/full-regression.yml

@@ -1,109 +0,0 @@
-# GitHub action to build LAMMPS on Linux and run regression tests
-name: "Full Regression Test"
-
-on:
-  push:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-jobs:
-  build:
-    name: Build LAMMPS
-    # restrict to official LAMMPS repository
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-    strategy:
-      max-parallel: 8
-      matrix:
-        idx: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-        show-progress: false
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache ninja-build libeigen3-dev \
-                     libcurl4-openssl-dev python3-dev \
-                     mpi-default-bin mpi-default-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-full-ccache-${{ github.sha }}
-        restore-keys: linux-full-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install --upgrade pip
-        python3 -m pip install numpy pyyaml junit_xml
-        cmake -S cmake -B build \
-              -C cmake/presets/gcc.cmake \
-              -C cmake/presets/most.cmake \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D BUILD_SHARED_LIBS=off \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s
-
-    - name: Run Full Regression Tests
-      shell: bash
-      run: |
-        source linuxenv/bin/activate
-        python3 tools/regression-tests/run_tests.py \
-               --lmp-bin=build/lmp \
-               --config-file=tools/regression-tests/config_serial.yaml \
-               --examples-top-level=examples --analyze --num-workers=8
-
-        python3 tools/regression-tests/run_tests.py \
-               --lmp-bin=build/lmp \
-               --config-file=tools/regression-tests/config_serial.yaml \
-               --list-input=input-list-${{ matrix.idx }}.txt \
-               --output-file=output-${{ matrix.idx }}.xml \
-               --progress-file=progress-${{ matrix.idx }}.yaml \
-               --log-file=run-${{ matrix.idx }}.log
-
-        tar -cvf full-regression-test-${{ matrix.idx }}.tar run-${{ matrix.idx }}.log progress-${{ matrix.idx }}.yaml output-${{ matrix.idx }}.xml
-
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: full-regression-test-artifact-${{ matrix.idx }}
-        path: full-regression-test-${{ matrix.idx }}.tar
-
-  merge:
-    runs-on: ubuntu-latest
-    needs: build
-    steps:
-      - name: Merge Artifacts
-        uses: actions/upload-artifact/merge@v4
-        with:
-          name: merged-full-regresssion-artifact
-          pattern: full-regression-test-artifact-*
-

.github/workflows/kokkos-regression.yaml

@@ -1,126 +0,0 @@
-# GitHub action to build LAMMPS on Linux and run selected regression tests
-name: "Kokkos OpenMP Regression Test"
-
-on:
-  push:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-jobs:
-  build:
-    name: Build LAMMPS with Kokkos OpenMP
-    # restrict to official LAMMPS repository
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-    strategy:
-      max-parallel: 6
-      matrix:
-        idx: [ 'pair-0', 'pair-1', 'fix-0', 'fix-1', 'compute', 'misc' ]
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-        show-progress: false
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache ninja-build libeigen3-dev \
-                     libcurl4-openssl-dev python3-dev \
-                     mpi-default-bin mpi-default-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-kokkos-ccache-${{ github.sha }}
-        restore-keys: linux-kokkos-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install --upgrade pip
-        python3 -m pip install numpy pyyaml junit_xml
-        cmake -S cmake -B build \
-              -C cmake/presets/gcc.cmake \
-              -C cmake/presets/basic.cmake \
-              -C cmake/presets/kokkos-openmp.cmake \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D BUILD_SHARED_LIBS=off \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D PKG_AMOEBA=on \
-              -D PKG_ASPHERE=on \
-              -D PKG_BROWNIAN=on \
-              -D PKG_CLASS2=on \
-              -D PKG_COLLOID=on \
-              -D PKG_CORESHELL=on \
-              -D PKG_DIPOLE=on \
-              -D PKG_DPD-BASIC=on \
-              -D PKG_EXTRA-COMPUTE=on \
-              -D PKG_EXTRA-FIX=on \
-              -D PKG_EXTRA-MOLECULE=on \
-              -D PKG_EXTRA-PAIR=on \
-              -D PKG_GRANULAR=on \
-              -D PKG_LEPTON=on \
-              -D PKG_MC=on \
-              -D PKG_MEAM=on \
-              -D PKG_POEMS=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QEQ=on \
-              -D PKG_REAXFF=on \
-              -D PKG_REPLICA=on \
-              -D PKG_SRD=on \
-              -D PKG_SPH=on \
-              -D PKG_VORONOI=on \
-              -G Ninja
-        cmake --build build
-        ccache -s
-
-    - name: Run Regression Tests for Selected Examples
-      shell: bash
-      run: |
-        source linuxenv/bin/activate
-        python3 tools/regression-tests/get_kokkos_input.py \
-               --examples-top-level=examples --batch-size=50 \
-               --filter-out="balance;fire;gcmc;granregion;hyper;mc;mdi;mliap;neb;pace;prd;pour;python;rigid;snap;streitz;shear;ttm"
-
-        export OMP_PROC_BIND=false
-        python3 tools/regression-tests/run_tests.py \
-               --lmp-bin=build/lmp \
-               --config-file=tools/regression-tests/config_kokkos_openmp.yaml \
-               --list-input=input-list-${{ matrix.idx }}-kk.txt \
-               --output-file=output-${{ matrix.idx }}.xml \
-               --progress-file=progress-${{ matrix.idx }}.yaml \
-               --log-file=run-${{ matrix.idx }}.log \
-               --quick-max=100
-
-        tar -cvf kokkos-regression-test-${{ matrix.idx }}.tar run-${{ matrix.idx }}.log progress-${{ matrix.idx }}.yaml output-${{ matrix.idx }}.xml
-
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: kokkos-regression-test-artifact-${{ matrix.idx }}
-        path: kokkos-regression-test-${{ matrix.idx }}.tar
-
-  merge:
-    runs-on: ubuntu-latest
-    needs: build
-    steps:
-      - name: Merge Artifacts
-        uses: actions/upload-artifact/merge@v4
-        with:
-          name: merged-kokkos-regresssion-artifact
-          pattern: kokkos-regression-test-artifact-*

.github/workflows/lammps-gui-flatpak.yml

@@ -1,53 +0,0 @@
-# GitHub action to build LAMMPS-GUI as a flatpak bundle
-name: "Build LAMMPS-GUI as flatpak bundle"
-
-on:
-  push:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
-jobs:
-  build:
-    name: LAMMPS-GUI flatpak build
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache \
-                                libeigen3-dev \
-                                libcurl4-openssl-dev \
-                                mold \
-                                ninja-build \
-                                python3-dev \
-                                flatpak \
-                                flatpak-builder
-
-    - name: Set up access to flatpak repo
-      run: flatpak --user remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
-
-    - name: Build flatpak
-      run: |
-        mkdir flatpack-state
-        sed -i -e 's/branch:.*/branch: develop/' tools/lammps-gui/org.lammps.lammps-gui.yml
-        flatpak-builder --force-clean --verbose --repo=flatpak-repo \
-                               --install-deps-from=flathub --state-dir=flatpak-state \
-                               --user --ccache --default-branch=${{ github.ref_name }} \
-                               flatpak-build tools/lammps-gui/org.lammps.lammps-gui.yml
-        flatpak build-bundle --runtime-repo=https://flathub.org/repo/flathub.flatpakrepo \
-                               --verbose  flatpak-repo LAMMPS-Linux-x86_64-GUI.flatpak \
-                               org.lammps.lammps-gui ${{ github.ref_name }}
-        flatpak install -y -v --user LAMMPS-Linux-x86_64-GUI.flatpak

.github/workflows/quick-regression.yml

@@ -1,118 +0,0 @@
-# GitHub action to build LAMMPS on Linux and run selected regression tests
-name: "Quick Regression Test"
-
-on:
-  pull_request:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
-jobs:
-  build:
-    name: Build LAMMPS
-    # restrict to official LAMMPS repository
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-    strategy:
-      max-parallel: 4
-      matrix:
-        idx: [ 0, 1, 2, 3 ]
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-        show-progress: false
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache ninja-build libeigen3-dev \
-                     libcurl4-openssl-dev python3-dev \
-                     mpi-default-bin mpi-default-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-quick-ccache-${{ github.sha }}
-        restore-keys: linux-quick-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install --upgrade pip
-        python3 -m pip install numpy pyyaml junit_xml
-        cmake -S cmake -B build \
-              -C cmake/presets/gcc.cmake \
-              -C cmake/presets/most.cmake \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D BUILD_SHARED_LIBS=off \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s
-
-    - name: Run Regression Tests for Modified Styles
-      shell: bash
-      run: |
-        source linuxenv/bin/activate
-        python3 tools/regression-tests/run_tests.py \
-               --lmp-bin=build/lmp \
-               --config-file=tools/regression-tests/config_quick.yaml \
-               --examples-top-level=examples \
-               --quick-reference=tools/regression-tests/reference.yaml \
-               --quick --quick-branch=origin/develop --quick-max=100 --num-workers=4
-
-        if [ -f input-list-${{ matrix.idx }}.txt ]
-        then \
-           python3 tools/regression-tests/run_tests.py \
-               --lmp-bin=build/lmp \
-               --config-file=tools/regression-tests/config_quick.yaml \
-               --list-input=input-list-${{ matrix.idx }}.txt \
-               --output-file=output-${{ matrix.idx }}.xml \
-               --progress-file=progress-${{ matrix.idx }}.yaml \
-               --log-file=run-${{ matrix.idx }}.log
-        fi
-
-        tar -cvf quick-regression-test-${{ matrix.idx }}.tar run-${{ matrix.idx }}.log progress-${{ matrix.idx }}.yaml output-${{ matrix.idx }}.xml
-
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: quick-regression-test-artifact-${{ matrix.idx }}
-        path: quick-regression-test-${{ matrix.idx }}.tar
-
-  merge:
-    runs-on: ubuntu-latest
-    needs: build
-    steps:
-      - name: Merge Artifacts
-        uses: actions/upload-artifact/merge@v4
-        with:
-          name: merged-quick-regresssion-artifact
-          pattern: quick-regression-test-artifact-*
-

.github/workflows/style-check.yml

@@ -1,38 +0,0 @@
-# GitHub action to run checks from tools/coding_standard
-name: "Check for Programming Style Conformance"
-
-on:
-  push:
-    branches:
-      - develop
-  pull_request:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
-jobs:
-  build:
-    name: Programming Style Conformance
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 1
-
-    - name: Run Tests
-      working-directory: src
-      shell: bash
-      run: |
-         make check-whitespace
-         make check-permissions
-         make check-homepage
-         make check-errordocs
-         make check-fmtlib

.github/workflows/unittest-arm64.yml

@@ -1,81 +0,0 @@
-# GitHub action to build LAMMPS on Linux with ARM64 and run standard unit tests
-name: "Unittest for Linux on ARM64"
-
-on:
-  push:
-    branches: [develop]
-
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
-jobs:
-  build:
-    name: Linux ARM64 Unit Test
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-22.04-arm
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache \
-                                libeigen3-dev \
-                                libcurl4-openssl-dev \
-                                mold \
-                                ninja-build \
-                                python3-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-unit-ccache-${{ github.sha }}
-        restore-keys: linux-unit-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install numpy
-        python3 -m pip install pyyaml
-        cmake -S cmake -B build \
-              -C cmake/presets/gcc.cmake \
-              -C cmake/presets/most.cmake \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D BUILD_SHARED_LIBS=on \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D ENABLE_TESTING=on \
-              -D MLIAP_ENABLE_ACE=on \
-              -D MLIAP_ENABLE_PYTHON=off \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s
-
-    - name: Run Tests
-      working-directory: build
-      shell: bash
-      run: ctest -V -LE unstable

.github/workflows/unittest-linux.yml

@@ -1,86 +0,0 @@
-# GitHub action to build LAMMPS on Linux and run standard unit tests
-name: "Unittest for Linux /w LAMMPS_BIGBIG"
-
-on:
-  push:
-    branches:
-      - develop
-  pull_request:
-    branches:
-      - develop
-
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
-jobs:
-  build:
-    name: Linux Unit Test
-    if: ${{ github.repository == 'lammps/lammps' }}
-    runs-on: ubuntu-latest
-    env:
-      CCACHE_DIR: ${{ github.workspace }}/.ccache
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-      with:
-        fetch-depth: 2
-
-    - name: Install extra packages
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y ccache \
-                                libeigen3-dev \
-                                libcurl4-openssl-dev \
-                                mold \
-                                ninja-build \
-                                python3-dev
-
-    - name: Create Build Environment
-      run: mkdir build
-
-    - name: Set up ccache
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CCACHE_DIR }}
-        key: linux-unit-ccache-${{ github.sha }}
-        restore-keys: linux-unit-ccache-
-
-    - name: Building LAMMPS via CMake
-      shell: bash
-      run: |
-        ccache -z
-        python3 -m venv linuxenv
-        source linuxenv/bin/activate
-        python3 -m pip install numpy
-        python3 -m pip install pyyaml
-        cmake -S cmake -B build \
-              -C cmake/presets/gcc.cmake \
-              -C cmake/presets/most.cmake \
-              -D CMAKE_CXX_COMPILER_LAUNCHER=ccache \
-              -D CMAKE_C_COMPILER_LAUNCHER=ccache \
-              -D BUILD_SHARED_LIBS=on \
-              -D LAMMPS_SIZES=bigbig \
-              -D DOWNLOAD_POTENTIALS=off \
-              -D ENABLE_TESTING=on \
-              -D MLIAP_ENABLE_ACE=on \
-              -D MLIAP_ENABLE_PYTHON=off \
-              -D PKG_MANIFOLD=on \
-              -D PKG_ML-PACE=on \
-              -D PKG_ML-RANN=on \
-              -D PKG_RHEO=on \
-              -D PKG_PTM=on \
-              -D PKG_PYTHON=on \
-              -D PKG_QTB=on \
-              -D PKG_SMTBQ=on \
-              -G Ninja
-        cmake --build build
-        ccache -s
-
-    - name: Run Tests
-      working-directory: build
-      shell: bash
-      run: ctest -V

.github/workflows/unittest-macos.yml

@@ -11,10 +11,6 @@ on:
 
   workflow_dispatch:
 
-concurrency:
-  group: ${{ github.event_name }}-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{github.event_name == 'pull_request'}}
-
 jobs:
   build:
     name: MacOS Unit Test

README

@@ -23,20 +23,17 @@ more information about the code and its uses.
 The LAMMPS distribution includes the following files and directories:
 
 README                     this file
-LICENSE                    the GNU General Public License (GPLv2)
-CITATION.cff               Citation information for LAMMPS in CFF format
-bench                      benchmark inputs
+LICENSE                    the GNU General Public License (GPL)
+bench                      benchmark problems
 cmake                      CMake build files
 doc                        documentation
-examples                   example inputs for many LAMMPS commands
-fortran                    Fortran 2003 module for LAMMPS
+examples                   simple test problems
+fortran                    Fortran wrapper for LAMMPS
 lib                        additional provided or external libraries
 potentials                 interatomic potential files
-python                     Python module for LAMMPS
+python                     Python wrappers for LAMMPS
 src                        source files
 tools                      pre- and post-processing tools
-unittest                   test programs for use with CTest
-.github                    Git and GitHub related files and tools
 
 Point your browser at any of these files to get started:
 
@@ -45,8 +42,6 @@ https://docs.lammps.org/Intro.html          hi-level introduction
 https://docs.lammps.org/Build.html          how to build LAMMPS
 https://docs.lammps.org/Run_head.html       how to run LAMMPS
 https://docs.lammps.org/Commands_all.html   Table of available commands
-https://docs.lammps.org/Howto.html          Short tutorials and HowTo discussions
-https://docs.lammps.org/Errors.html         How to interpret and debug errors
 https://docs.lammps.org/Library.html        LAMMPS library interfaces
 https://docs.lammps.org/Modify.html         how to modify and extend LAMMPS
 https://docs.lammps.org/Developer.html      LAMMPS developer info

cmake/CMakeLists.txt

@@ -3,9 +3,6 @@
 # CMake build system
 # This file is part of LAMMPS
 cmake_minimum_required(VERSION 3.16)
-if(CMAKE_VERSION VERSION_LESS 3.20)
-  message(WARNING "LAMMPS is planning to require at least CMake version 3.20 by Summer 2025. Please upgrade!")
-endif()
 ########################################
 # set policy to silence warnings about ignoring <PackageName>_ROOT but use it
 if(POLICY CMP0074)
@@ -121,7 +118,7 @@ endif()
 
 # silence excessive warnings for new Intel Compilers
 if(CMAKE_CXX_COMPILER_ID STREQUAL "IntelLLVM")
-  set(CMAKE_TUNE_DEFAULT "-fp-model precise -Wno-tautological-constant-compare -Wno-unused-command-line-argument")
+  set(CMAKE_TUNE_DEFAULT "-Wno-tautological-constant-compare -Wno-unused-command-line-argument")
 endif()
 
 # silence excessive warnings for PGI/NVHPC compilers
@@ -144,31 +141,19 @@ endif()
 
 # silence nvcc warnings
 if((PKG_KOKKOS) AND (Kokkos_ENABLE_CUDA) AND NOT (CMAKE_CXX_COMPILER_ID STREQUAL "Clang"))
-  set(CMAKE_TUNE_DEFAULT "${CMAKE_TUNE_DEFAULT}" "-Xcudafe --diag_suppress=unrecognized_pragma,--diag_suppress=128")
+  set(CMAKE_TUNE_DEFAULT "${CMAKE_TUNE_DEFAULT} -Xcudafe --diag_suppress=unrecognized_pragma")
 endif()
 
-# we *require* C++11 without extensions but prefer C++17.
-# Kokkos requires at least C++17 (currently)
+# we require C++11 without extensions. Kokkos requires at least C++17 (currently)
 if(NOT CMAKE_CXX_STANDARD)
-  if(cxx_std_17 IN_LIST CMAKE_CXX_COMPILE_FEATURES)
-    set(CMAKE_CXX_STANDARD 17)
-  else()
-    set(CMAKE_CXX_STANDARD 11)
-  endif()
+  set(CMAKE_CXX_STANDARD 11)
 endif()
 if(CMAKE_CXX_STANDARD LESS 11)
   message(FATAL_ERROR "C++ standard must be set to at least 11")
 endif()
-if(CMAKE_CXX_STANDARD LESS 17)
-  message(WARNING "Selecting C++17 standard is preferred over C++${CMAKE_CXX_STANDARD}")
-endif()
 if(PKG_KOKKOS AND (CMAKE_CXX_STANDARD LESS 17))
   set(CMAKE_CXX_STANDARD 17)
 endif()
-# turn off C++17 check in lmptype.h
-if(LAMMPS_CXX11)
-  add_compile_definitions(LAMMPS_CXX11)
-endif()
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_CXX_EXTENSIONS OFF CACHE BOOL "Use compiler extensions")
 # ugly hacks for MSVC which by default always reports an old C++ standard in the __cplusplus macro
@@ -180,7 +165,6 @@ if(MSVC)
     add_compile_options(/wd4267)
     add_compile_options(/wd4250)
     add_compile_options(/EHsc)
-    add_compile_options(/utf-8)
   endif()
   add_compile_definitions(_CRT_SECURE_NO_WARNINGS)
 endif()
@@ -209,7 +193,7 @@ endif()
 ########################################################################
 # User input options                                                   #
 ########################################################################
-# backward compatibility with older LAMMPS documentation
+# backward compatibility with CMake before 3.12 and older LAMMPS documentation
 if (PYTHON_EXECUTABLE)
   set(Python_EXECUTABLE "${PYTHON_EXECUTABLE}")
 endif()
@@ -225,12 +209,6 @@ if(DEFINED ENV{VIRTUAL_ENV} AND NOT Python_EXECUTABLE)
     "   Setting Python interpreter to: ${Python_EXECUTABLE}")
 endif()
 
-find_package(Python COMPONENTS Interpreter QUIET)
-# NOTE: RHEL 8.0 and Ubuntu 18.04LTS ship with Python 3.6, Python 3.8 was EOL in 2024
-if(Python_VERSION VERSION_LESS 3.6)
-  message(FATAL_ERROR "LAMMPS requires Python 3.6 or later")
-endif()
-
 set(LAMMPS_MACHINE "" CACHE STRING "Suffix to append to lmp binary (WON'T enable any features automatically")
 mark_as_advanced(LAMMPS_MACHINE)
 if(LAMMPS_MACHINE)
@@ -368,17 +346,6 @@ foreach(PKG ${STANDARD_PACKAGES} ${SUFFIX_PACKAGES})
   option(PKG_${PKG} "Build ${PKG} Package" OFF)
 endforeach()
 
-set(DEPRECATED_PACKAGES AWPMD ATC POEMS)
-foreach(PKG ${DEPRECATED_PACKAGES})
-  if(PKG_${PKG})
-    message(WARNING
-          "The ${PKG} package will be removed from LAMMPS in Summer 2025 due to lack of "
-          "maintenance and use of code constructs that conflict with modern C++ compilers "
-          "and standards.  Please contact developers@lammps.org if you have any concerns "
-          "about this step.")
-  endif()
-endforeach()
-
 ######################################################
 # packages with special compiler needs or external libs
 ######################################################
@@ -431,8 +398,8 @@ else()
   target_link_libraries(lammps PUBLIC mpi_stubs)
 endif()
 
-set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
-set(LAMMPS_SIZES_VALUES smallbig bigbig)
+set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallsmall: all 32-bit, smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
+set(LAMMPS_SIZES_VALUES smallbig bigbig smallsmall)
 set_property(CACHE LAMMPS_SIZES PROPERTY STRINGS ${LAMMPS_SIZES_VALUES})
 validate_option(LAMMPS_SIZES LAMMPS_SIZES_VALUES)
 string(TOUPPER ${LAMMPS_SIZES} LAMMPS_SIZES)
@@ -530,7 +497,7 @@ if((CMAKE_CXX_COMPILER_ID STREQUAL "Intel") AND (CMAKE_CXX_STANDARD GREATER_EQUA
           PROPERTIES COMPILE_OPTIONS "-std=c++14")
 endif()
 
-if(PKG_ATC OR PKG_AWPMD OR PKG_ML-QUIP OR PKG_ML-POD OR PKG_ELECTRODE OR PKG_RHEO OR BUILD_TOOLS)
+if(PKG_ATC OR PKG_AWPMD OR PKG_ML-QUIP OR PKG_ML-POD OR PKG_ELECTRODE OR BUILD_TOOLS)
   enable_language(C)
   if (NOT USE_INTERNAL_LINALG)
     find_package(LAPACK)
@@ -548,6 +515,22 @@ if(PKG_ATC OR PKG_AWPMD OR PKG_ML-QUIP OR PKG_ML-POD OR PKG_ELECTRODE OR PKG_RHE
   endif()
 endif()
 
+find_package(CURL QUIET)
+option(WITH_CURL "Enable libcurl support" ${CURL_FOUND})
+if(WITH_CURL)
+  target_compile_definitions(lammps PRIVATE -DLAMMPS_CURL)
+
+  # need to use pkgconfig for fully static bins to find custom static libs
+  if (CMAKE_SYSTEM_NAME STREQUAL "LinuxMUSL")
+    include(FindPkgConfig)
+    pkg_check_modules(CURL IMPORTED_TARGET libcurl libssl libcrypto)
+    target_link_libraries(lammps PUBLIC PkgConfig::CURL)
+  else()
+    find_package(CURL REQUIRED)
+    target_link_libraries(lammps PRIVATE CURL::libcurl)
+  endif()
+endif()
+
 # tweak jpeg library names to avoid linker errors with MinGW cross-compilation
 set(JPEG_NAMES libjpeg libjpeg-62)
 find_package(JPEG QUIET)
@@ -605,22 +588,12 @@ else()
 endif()
 
 foreach(PKG_WITH_INCL KSPACE PYTHON ML-IAP VORONOI COLVARS ML-HDNNP MDI MOLFILE NETCDF
-        PLUMED QMMM ML-QUIP SCAFACOS MACHDYN VTK KIM COMPRESS ML-PACE LEPTON EXTRA-COMMAND)
+        PLUMED QMMM ML-QUIP SCAFACOS MACHDYN VTK KIM COMPRESS ML-PACE LEPTON RHEO)
   if(PKG_${PKG_WITH_INCL})
     include(Packages/${PKG_WITH_INCL})
   endif()
 endforeach()
 
-# settings for misc packages and styles
-if(PKG_MISC)
-  option(LAMMPS_ASYNC_IMD "Asynchronous IMD processing" OFF)
-  mark_as_advanced(LAMMPS_ASYNC_IMD)
-  if(LAMMPS_ASYNC_IMD)
-    target_compile_definitions(lammps PRIVATE -DLAMMPS_ASYNC_IMD)
-    message(STATUS "Using IMD in asynchronous mode")
-  endif()
-endif()
-
 # optionally enable building script wrappers using swig
 option(WITH_SWIG "Build scripting language wrappers with SWIG" OFF)
 if(WITH_SWIG)
@@ -630,8 +603,13 @@ endif()
 
 set(CMAKE_TUNE_FLAGS "${CMAKE_TUNE_DEFAULT}" CACHE STRING "Compiler and machine specific optimization flags (compilation only)")
 separate_arguments(CMAKE_TUNE_FLAGS)
-target_compile_options(lammps PRIVATE ${CMAKE_TUNE_FLAGS})
-target_compile_options(lmp PRIVATE ${CMAKE_TUNE_FLAGS})
+foreach(_FLAG ${CMAKE_TUNE_FLAGS})
+  target_compile_options(lammps PRIVATE ${_FLAG})
+  # skip these flags when linking the main executable
+  if(NOT (("${_FLAG}" STREQUAL "-Xcudafe") OR (("${_FLAG}" STREQUAL "--diag_suppress=unrecognized_pragma"))))
+    target_compile_options(lmp PRIVATE ${_FLAG})
+  endif()
+endforeach()
 ########################################################################
 # Basic system tests (standard libraries, headers, functions, types)   #
 ########################################################################
@@ -860,15 +838,9 @@ foreach(_DEF ${LAMMPS_DEFINES})
   set(LAMMPS_API_DEFINES "${LAMMPS_API_DEFINES} -D${_DEF}")
 endforeach()
 if(BUILD_SHARED_LIBS)
-  install(TARGETS lammps EXPORT LAMMPS_Targets
-          LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
-          ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
-          RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
+  install(TARGETS lammps EXPORT LAMMPS_Targets LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR})
   if(NOT BUILD_MPI)
-    install(TARGETS mpi_stubs EXPORT LAMMPS_Targets
-            LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
-            ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
-            RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
+    install(TARGETS mpi_stubs EXPORT LAMMPS_Targets LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR})
   endif()
   configure_file(pkgconfig/liblammps.pc.in ${CMAKE_CURRENT_BINARY_DIR}/liblammps${LAMMPS_MACHINE}.pc @ONLY)
   install(FILES ${CMAKE_CURRENT_BINARY_DIR}/liblammps${LAMMPS_MACHINE}.pc DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig)
@@ -936,7 +908,7 @@ endif()
 include(Testing)
 include(CodeCoverage)
 include(CodingStandard)
-find_package(ClangFormat 11.0 QUIET)
+find_package(ClangFormat 11.0)
 
 if(ClangFormat_FOUND)
   add_custom_target(format-src
@@ -1009,9 +981,6 @@ message(STATUS "<<< Compilers and Flags: >>>
       C++ Standard:  ${CMAKE_CXX_STANDARD}
       C++ Flags:    ${CMAKE_CXX_FLAGS} ${CMAKE_CXX_FLAGS_${BTYPE}}
       Defines:       ${DEFINES}")
-if(CMAKE_CXX_COMPILER_LAUNCHER)
-  message(STATUS "      Launcher:      ${CMAKE_CXX_COMPILER_LAUNCHER}")
-endif()
 get_target_property(OPTIONS lammps COMPILE_OPTIONS)
 if(OPTIONS)
   message("      Options:       ${OPTIONS}")
@@ -1030,9 +999,6 @@ if(_index GREATER -1)
       Type:          ${CMAKE_C_COMPILER_ID}
       Version:       ${CMAKE_C_COMPILER_VERSION}
       C Flags:      ${CMAKE_C_FLAGS} ${CMAKE_C_FLAGS_${BTYPE}}")
-  if(CMAKE_C_COMPILER_LAUNCHER)
-    message(STATUS "      Launcher:      ${CMAKE_C_COMPILER_LAUNCHER}")
-  endif()
 endif()
 message(STATUS "<<< Linker flags: >>>")
 message(STATUS "Executable name:  ${LAMMPS_BINARY}")

cmake/Modules/CodeCoverage.cmake

@@ -7,76 +7,76 @@
 # For Python coverage the coverage package needs to be installed
 ###############################################################################
 if(ENABLE_COVERAGE)
-  find_program(GCOVR_BINARY gcovr)
-  find_package_handle_standard_args(GCOVR DEFAULT_MSG GCOVR_BINARY)
+    find_program(GCOVR_BINARY gcovr)
+    find_package_handle_standard_args(GCOVR DEFAULT_MSG GCOVR_BINARY)
 
-  find_program(COVERAGE_BINARY coverage)
-  find_package_handle_standard_args(COVERAGE DEFAULT_MSG COVERAGE_BINARY)
+    find_program(COVERAGE_BINARY coverage)
+    find_package_handle_standard_args(COVERAGE DEFAULT_MSG COVERAGE_BINARY)
 
-  if(GCOVR_FOUND)
-    get_filename_component(ABSOLUTE_LAMMPS_SOURCE_DIR ${LAMMPS_SOURCE_DIR} ABSOLUTE)
+    if(GCOVR_FOUND)
+        get_filename_component(ABSOLUTE_LAMMPS_SOURCE_DIR ${LAMMPS_SOURCE_DIR} ABSOLUTE)
 
-    add_custom_target(
-        gen_coverage_xml
-        COMMAND ${GCOVR_BINARY} -s -x -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o coverage.xml
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-        COMMENT "Generating XML coverage report..."
-    )
+        add_custom_target(
+            gen_coverage_xml
+            COMMAND ${GCOVR_BINARY} -s -x -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o coverage.xml
+            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+            COMMENT "Generating XML coverage report..."
+        )
 
-    set(COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/coverage_html)
+        set(COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/coverage_html)
 
-    add_custom_target(coverage_html_folder
-        COMMAND ${CMAKE_COMMAND} -E make_directory ${COVERAGE_HTML_DIR})
+        add_custom_target(coverage_html_folder
+            COMMAND ${CMAKE_COMMAND} -E make_directory ${COVERAGE_HTML_DIR})
 
-    add_custom_target(
-        gen_coverage_html
-        COMMAND ${GCOVR_BINARY} -s  --html --html-details -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o ${COVERAGE_HTML_DIR}/index.html
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-        COMMENT "Generating HTML coverage report..."
-    )
-    add_dependencies(gen_coverage_html coverage_html_folder)
+        add_custom_target(
+            gen_coverage_html
+            COMMAND ${GCOVR_BINARY} -s  --html --html-details -r ${ABSOLUTE_LAMMPS_SOURCE_DIR} --object-directory=${CMAKE_BINARY_DIR} -o ${COVERAGE_HTML_DIR}/index.html
+            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+            COMMENT "Generating HTML coverage report..."
+        )
+        add_dependencies(gen_coverage_html coverage_html_folder)
 
-    add_custom_target(clean_coverage_html
-        ${CMAKE_COMMAND} -E remove_directory ${COVERAGE_HTML_DIR}
-        COMMENT "Deleting HTML coverage report..."
-    )
+        add_custom_target(clean_coverage_html
+            ${CMAKE_COMMAND} -E remove_directory ${COVERAGE_HTML_DIR}
+            COMMENT "Deleting HTML coverage report..."
+        )
 
-    add_custom_target(reset_coverage
-        ${CMAKE_COMMAND} -E remove -f */*.gcda */*/*.gcda */*/*/*.gcda
-                          */*/*/*/*.gcda */*/*/*/*/*.gcda */*/*/*/*/*/*.gcda
-                          */*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*.gcda
-                          */*/*/*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*/*/*.gcda
-        WORKIND_DIRECTORY ${CMAKE_BINARY_DIR}
-        COMMENT "Deleting coverage data files..."
-    )
-    add_dependencies(reset_coverage clean_coverage_html)
-  endif()
+        add_custom_target(reset_coverage
+            ${CMAKE_COMMAND} -E remove -f */*.gcda */*/*.gcda */*/*/*.gcda
+                              */*/*/*/*.gcda */*/*/*/*/*.gcda */*/*/*/*/*/*.gcda
+                              */*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*.gcda
+                              */*/*/*/*/*/*/*/*/*.gcda */*/*/*/*/*/*/*/*/*/*.gcda
+            WORKIND_DIRECTORY ${CMAKE_BINARY_DIR}
+            COMMENT "Deleting coverage data files..."
+        )
+        add_dependencies(reset_coverage clean_coverage_html)
+    endif()
 
-  if(COVERAGE_FOUND)
-    set(PYTHON_COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/python_coverage_html)
-    configure_file(.coveragerc.in ${CMAKE_BINARY_DIR}/.coveragerc @ONLY)
+    if(COVERAGE_FOUND)
+        set(PYTHON_COVERAGE_HTML_DIR ${CMAKE_BINARY_DIR}/python_coverage_html)
+        configure_file(.coveragerc.in ${CMAKE_BINARY_DIR}/.coveragerc @ONLY)
 
-    add_custom_command(
-        OUTPUT ${CMAKE_BINARY_DIR}/unittest/python/.coverage
-        COMMAND ${COVERAGE_BINARY} combine
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-        COMMENT "Combine Python coverage files..."
-    )
+        add_custom_command(
+            OUTPUT ${CMAKE_BINARY_DIR}/unittest/python/.coverage
+            COMMAND ${COVERAGE_BINARY} combine
+            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+            COMMENT "Combine Python coverage files..."
+        )
 
-    add_custom_target(
-        gen_python_coverage_html
-        COMMAND ${COVERAGE_BINARY} html --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -d ${PYTHON_COVERAGE_HTML_DIR}
-        DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-        COMMENT "Generating HTML Python coverage report..."
-    )
+        add_custom_target(
+            gen_python_coverage_html
+            COMMAND ${COVERAGE_BINARY} html --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -d ${PYTHON_COVERAGE_HTML_DIR}
+            DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
+            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+            COMMENT "Generating HTML Python coverage report..."
+        )
 
-    add_custom_target(
-        gen_python_coverage_xml
-        COMMAND ${COVERAGE_BINARY} xml --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -o ${CMAKE_BINARY_DIR}/python_coverage.xml
-        DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
-        COMMENT "Generating XML Python coverage report..."
-    )
-  endif()
+        add_custom_target(
+            gen_python_coverage_xml
+            COMMAND ${COVERAGE_BINARY} xml --rcfile=${CMAKE_BINARY_DIR}/.coveragerc -o ${CMAKE_BINARY_DIR}/python_coverage.xml
+            DEPENDS ${CMAKE_BINARY_DIR}/unittest/python/.coverage ${CMAKE_BINARY_DIR}/.coveragerc
+            WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/unittest/python
+            COMMENT "Generating XML Python coverage report..."
+        )
+    endif()
 endif()

cmake/Modules/CodingStandard.cmake

@@ -1,39 +1,40 @@
-# use default (or custom) Python executable.
-# Python version check is in main CMakeLists.txt file
-if(Python_EXECUTABLE)
+# use default (or custom) Python executable, if version is sufficient
+if(Python_VERSION VERSION_GREATER_EQUAL 3.6)
   set(Python3_EXECUTABLE ${Python_EXECUTABLE})
 endif()
 find_package(Python3 COMPONENTS Interpreter)
 
 if(Python3_EXECUTABLE)
-  add_custom_target(
-    check-whitespace
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Check for whitespace errors")
-  add_custom_target(
-    check-homepage
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Check for homepage URL errors")
-  add_custom_target(
-    check-permissions
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Check for permission errors")
-  add_custom_target(
-    fix-whitespace
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py -f .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Fix whitespace errors")
-  add_custom_target(
-    fix-homepage
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py -f .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Fix homepage URL errors")
-  add_custom_target(
-    fix-permissions
-    ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py -f .
-    WORKING_DIRECTORY  ${LAMMPS_DIR}
-    COMMENT "Fix permission errors")
+    if(Python3_VERSION VERSION_GREATER_EQUAL 3.6)
+        add_custom_target(
+          check-whitespace
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Check for whitespace errors")
+        add_custom_target(
+          check-homepage
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Check for homepage URL errors")
+        add_custom_target(
+          check-permissions
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Check for permission errors")
+        add_custom_target(
+          fix-whitespace
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/whitespace.py -f .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Fix whitespace errors")
+        add_custom_target(
+          fix-homepage
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/homepage.py -f .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Fix homepage URL errors")
+        add_custom_target(
+          fix-permissions
+          ${Python3_EXECUTABLE} ${LAMMPS_TOOLS_DIR}/coding_standard/permissions.py -f .
+          WORKING_DIRECTORY  ${LAMMPS_DIR}
+          COMMENT "Fix permission errors")
+    endif()
 endif()

cmake/Modules/Documentation.cmake

@@ -4,8 +4,6 @@
 option(BUILD_DOC "Build LAMMPS HTML documentation" OFF)
 
 if(BUILD_DOC)
-  option(BUILD_DOC_VENV "Build LAMMPS documentation virtual environment" ON)
-  mark_as_advanced(BUILD_DOC_VENV)
   # Current Sphinx versions require at least Python 3.8
   # use default (or custom) Python executable, if version is sufficient
   if(Python_VERSION VERSION_GREATER_EQUAL 3.8)
@@ -13,13 +11,21 @@ if(BUILD_DOC)
   endif()
   find_package(Python3 REQUIRED COMPONENTS Interpreter)
   if(Python3_VERSION VERSION_LESS 3.8)
-    message(FATAL_ERROR "Python 3.8 and up is required to build the LAMMPS HTML documentation")
+    message(FATAL_ERROR "Python 3.8 and up is required to build the HTML documentation")
   endif()
   set(VIRTUALENV ${Python3_EXECUTABLE} -m venv)
 
   find_package(Doxygen 1.8.10 REQUIRED)
   file(GLOB DOC_SOURCES CONFIGURE_DEPENDS ${LAMMPS_DOC_DIR}/src/[^.]*.rst)
 
+  add_custom_command(
+    OUTPUT docenv
+    COMMAND ${VIRTUALENV} docenv
+  )
+
+  set(DOCENV_BINARY_DIR ${CMAKE_BINARY_DIR}/docenv/bin)
+  set(DOCENV_REQUIREMENTS_FILE ${LAMMPS_DOC_DIR}/utils/requirements.txt)
+
   set(SPHINX_CONFIG_DIR ${LAMMPS_DOC_DIR}/utils/sphinx-config)
   set(SPHINX_CONFIG_FILE_TEMPLATE ${SPHINX_CONFIG_DIR}/conf.py.in)
   set(SPHINX_STATIC_DIR  ${SPHINX_CONFIG_DIR}/_static)
@@ -38,35 +44,17 @@ if(BUILD_DOC)
   # configure paths in conf.py, since relative paths change when file is copied
   configure_file(${SPHINX_CONFIG_FILE_TEMPLATE} ${DOC_BUILD_CONFIG_FILE})
 
-  if(BUILD_DOC_VENV)
-    add_custom_command(
-      OUTPUT docenv
-      COMMAND ${VIRTUALENV} docenv
-    )
+  add_custom_command(
+    OUTPUT ${DOC_BUILD_DIR}/requirements.txt
+    DEPENDS docenv ${DOCENV_REQUIREMENTS_FILE}
+    COMMAND ${CMAKE_COMMAND} -E copy ${DOCENV_REQUIREMENTS_FILE} ${DOC_BUILD_DIR}/requirements.txt
+    COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install --upgrade pip
+    COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install --upgrade ${LAMMPS_DOC_DIR}/utils/converters
+    COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install -r ${DOC_BUILD_DIR}/requirements.txt --upgrade
+  )
 
-    set(DOCENV_BINARY_DIR ${CMAKE_BINARY_DIR}/docenv/bin)
-    set(DOCENV_REQUIREMENTS_FILE ${LAMMPS_DOC_DIR}/utils/requirements.txt)
-
-    add_custom_command(
-      OUTPUT ${DOC_BUILD_DIR}/requirements.txt
-      DEPENDS docenv ${DOCENV_REQUIREMENTS_FILE}
-      COMMAND ${CMAKE_COMMAND} -E copy ${DOCENV_REQUIREMENTS_FILE} ${DOC_BUILD_DIR}/requirements.txt
-      COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install --upgrade pip
-      COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install --upgrade ${LAMMPS_DOC_DIR}/utils/converters
-      COMMAND ${DOCENV_BINARY_DIR}/pip $ENV{PIP_OPTIONS} install -r ${DOC_BUILD_DIR}/requirements.txt --upgrade
-    )
-
-    set(DOCENV_DEPS docenv ${DOC_BUILD_DIR}/requirements.txt)
-    if(NOT TARGET Sphinx::sphinx-build)
-      add_executable(Sphinx::sphinx-build IMPORTED GLOBAL)
-      set_target_properties(Sphinx::sphinx-build PROPERTIES IMPORTED_LOCATION "${DOCENV_BINARY_DIR}/sphinx-build")
-    endif()
-  else()
-    find_package(Sphinx)
-  endif()
-
-  set(MATHJAX_URL "https://github.com/mathjax/MathJax/archive/3.2.2.tar.gz" CACHE STRING "URL for MathJax tarball")
-  set(MATHJAX_MD5 "08dd6ef33ca08870220d9aade2a62845" CACHE STRING "MD5 checksum of MathJax tarball")
+  set(MATHJAX_URL "https://github.com/mathjax/MathJax/archive/3.1.3.tar.gz" CACHE STRING "URL for MathJax tarball")
+  set(MATHJAX_MD5 "b81661c6e6ba06278e6ae37b30b0c492" CACHE STRING "MD5 checksum of MathJax tarball")
   mark_as_advanced(MATHJAX_URL)
   GetFallbackURL(MATHJAX_URL MATHJAX_FALLBACK)
 
@@ -109,9 +97,8 @@ if(BUILD_DOC)
   endif()
   add_custom_command(
     OUTPUT html
-    DEPENDS ${DOC_SOURCES} ${DOCENV_DEPS} ${DOXYGEN_XML_DIR}/index.xml ${BUILD_DOC_CONFIG_FILE}
-    COMMAND ${Python3_EXECUTABLE} ${LAMMPS_DOC_DIR}/utils/make-globbed-tocs.py -d ${LAMMPS_DOC_DIR}/src
-    COMMAND Sphinx::sphinx-build ${SPHINX_EXTRA_OPTS} -b html -c ${DOC_BUILD_DIR} -d ${DOC_BUILD_DIR}/doctrees ${LAMMPS_DOC_DIR}/src ${DOC_BUILD_DIR}/html
+    DEPENDS ${DOC_SOURCES} docenv ${DOC_BUILD_DIR}/requirements.txt ${DOXYGEN_XML_DIR}/index.xml ${BUILD_DOC_CONFIG_FILE}
+    COMMAND ${DOCENV_BINARY_DIR}/sphinx-build ${SPHINX_EXTRA_OPTS} -b html -c ${DOC_BUILD_DIR} -d ${DOC_BUILD_DIR}/doctrees ${LAMMPS_DOC_DIR}/src ${DOC_BUILD_DIR}/html
     COMMAND ${CMAKE_COMMAND} -E create_symlink Manual.html ${DOC_BUILD_DIR}/html/index.html
     COMMAND ${CMAKE_COMMAND} -E copy_directory ${LAMMPS_DOC_DIR}/src/PDF ${DOC_BUILD_DIR}/html/PDF
     COMMAND ${CMAKE_COMMAND} -E remove -f ${DOXYGEN_XML_DIR}/run.stamp

cmake/Modules/FindSphinx.cmake

@@ -1,29 +0,0 @@
-# Find sphinx-build
-find_program(Sphinx_EXECUTABLE NAMES sphinx-build
-	                       PATH_SUFFIXES bin
-			       DOC "Sphinx documenation build executable")
-mark_as_advanced(Sphinx_EXECUTABLE)
-
-if(Sphinx_EXECUTABLE)
-  execute_process(COMMAND ${Sphinx_EXECUTABLE} --version
-                  OUTPUT_VARIABLE sphinx_version
-                  OUTPUT_STRIP_TRAILING_WHITESPACE
-                  RESULT_VARIABLE _sphinx_version_result)
-
-  if(_sphinx_version_result)
-    message(WARNING "Unable to determine sphinx-build verison: ${_sphinx_version_result}")
-  else()
-    string(REGEX REPLACE "sphinx-build ([0-9.]+).*"
-                         "\\1"
-                         Sphinx_VERSION
-                         "${sphinx_version}")
-  endif()
-
-  if(NOT TARGET Sphinx::sphinx-build)
-    add_executable(Sphinx::sphinx-build IMPORTED GLOBAL)
-    set_target_properties(Sphinx::sphinx-build PROPERTIES IMPORTED_LOCATION "${Sphinx_EXECUTABLE}")
-  endif()
-endif()
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(Sphinx REQUIRED_VARS Sphinx_EXECUTABLE VERSION_VAR Sphinx_VERSION)

cmake/Modules/FindVORO.cmake

@@ -21,9 +21,9 @@ if(VORO_FOUND)
   set(VORO_LIBRARIES ${VORO_LIBRARY})
   set(VORO_INCLUDE_DIRS ${VORO_INCLUDE_DIR})
 
-  if(NOT TARGET VORO::voro++)
-    add_library(VORO::voro++ UNKNOWN IMPORTED)
-    set_target_properties(VORO::voro++ PROPERTIES
+  if(NOT TARGET VORO::VORO)
+    add_library(VORO::VORO UNKNOWN IMPORTED)
+    set_target_properties(VORO::VORO PROPERTIES
       IMPORTED_LOCATION "${VORO_LIBRARY}"
       INTERFACE_INCLUDE_DIRECTORIES "${VORO_INCLUDE_DIR}")
   endif()

cmake/Modules/LAMMPSInterfacePlugin.cmake

@@ -34,26 +34,8 @@ if(MSVC)
   add_compile_definitions(_CRT_SECURE_NO_WARNINGS)
 endif()
 
-if(NOT CMAKE_CXX_STANDARD)
-  if(cxx_std_17 IN_LIST CMAKE_CXX_COMPILE_FEATURES)
-    set(CMAKE_CXX_STANDARD 17)
-  else()
-    set(CMAKE_CXX_STANDARD 11)
-  endif()
-endif()
-if(CMAKE_CXX_STANDARD LESS 11)
-  message(FATAL_ERROR "C++ standard must be set to at least 11")
-endif()
-if(CMAKE_CXX_STANDARD LESS 17)
-  message(WARNING "Selecting C++17 standard is preferred over C++${CMAKE_CXX_STANDARD}")
-endif()
-if(PKG_KOKKOS AND (CMAKE_CXX_STANDARD LESS 17))
-  set(CMAKE_CXX_STANDARD 17)
-endif()
-# turn off C++17 check in lmptype.h
-if(LAMMPS_CXX11)
-  add_compile_definitions(LAMMPS_CXX11)
-endif()
+# C++11 is required
+set(CMAKE_CXX_STANDARD 11)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
 # Need -restrict with Intel compilers
@@ -260,8 +242,8 @@ endif()
 
 ################
 # integer size selection
-set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
-set(LAMMPS_SIZES_VALUES smallbig bigbig)
+set(LAMMPS_SIZES "smallbig" CACHE STRING "LAMMPS integer sizes (smallsmall: all 32-bit, smallbig: 64-bit #atoms #timesteps, bigbig: also 64-bit imageint, 64-bit atom ids)")
+set(LAMMPS_SIZES_VALUES smallbig bigbig smallsmall)
 set_property(CACHE LAMMPS_SIZES PROPERTY STRINGS ${LAMMPS_SIZES_VALUES})
 validate_option(LAMMPS_SIZES LAMMPS_SIZES_VALUES)
 string(TOUPPER ${LAMMPS_SIZES} LAMMPS_SIZES)

cmake/Modules/Packages/EXTRA-COMMAND.cmake

@@ -1,10 +0,0 @@
-# the geturl command needs libcurl
-
-find_package(CURL QUIET COMPONENTS HTTP HTTPS)
-option(WITH_CURL "Enable libcurl support" ${CURL_FOUND})
-if(WITH_CURL)
-  find_package(CURL REQUIRED COMPONENTS HTTP HTTPS)
-  target_compile_definitions(lammps PRIVATE -DLAMMPS_CURL)
-  target_link_libraries(lammps PRIVATE CURL::libcurl)
-endif()
-

cmake/Modules/Packages/GPU.cmake

@@ -189,7 +189,7 @@ if(GPU_API STREQUAL "CUDA")
   endif()
 
   add_executable(nvc_get_devices ${LAMMPS_LIB_SOURCE_DIR}/gpu/geryon/ucl_get_devices.cpp)
-  target_compile_definitions(nvc_get_devices PRIVATE -DUCL_CUDADR)
+  target_compile_definitions(nvc_get_devices PRIVATE -DUCL_CUDADR -DLAMMPS_${LAMMPS_SIZES})
   target_link_libraries(nvc_get_devices PRIVATE ${CUDA_LIBRARIES} ${CUDA_CUDA_LIBRARY})
   target_include_directories(nvc_get_devices PRIVATE ${CUDA_INCLUDE_DIRS})
 
@@ -489,7 +489,7 @@ else()
   target_link_libraries(gpu PRIVATE mpi_stubs)
 endif()
 
-target_compile_definitions(gpu PRIVATE -DLAMMPS_${LAMMPS_SIZES})
 set_target_properties(gpu PROPERTIES OUTPUT_NAME lammps_gpu${LAMMPS_MACHINE})
+target_compile_definitions(gpu PRIVATE -DLAMMPS_${LAMMPS_SIZES})
 target_sources(lammps PRIVATE ${GPU_SOURCES})
 target_include_directories(lammps PRIVATE ${GPU_SOURCES_DIR})

cmake/Modules/Packages/INTEL.cmake

@@ -72,10 +72,6 @@ if(INTEL_ARCH STREQUAL "KNL")
   if(NOT CMAKE_CXX_COMPILER_ID STREQUAL "Intel")
     message(FATAL_ERROR "Must use Intel compiler with INTEL for KNL architecture")
   endif()
-  message(WARNING, "Support for Intel Xeon Phi accelerators and Knight's Landing CPUs "
-          "will be removed from LAMMPS in Summer 2025 due to lack of available machines "
-          "in labs and HPC centers and removed support in recent compilers "
-          "Please contact developers@lammps.org if you have any concerns about this step.")
   set(CMAKE_EXE_LINKER_FLAGS  "${CMAKE_EXE_LINKER_FLAGS} -xHost -qopenmp -qoffload")
   set(MIC_OPTIONS "-qoffload-option,mic,compiler,\"-fp-model fast=2 -mGLOB_default_function_attrs=\\\"gather_scatter_loop_unroll=4\\\"\"")
   target_compile_options(lammps PRIVATE -xMIC-AVX512 -qoffload -fno-alias -ansi-alias -restrict -qoverride-limits ${MIC_OPTIONS})

cmake/Modules/Packages/KOKKOS.cmake

@@ -7,13 +7,10 @@ endif()
 
 ########################################################################
 # consistency checks and Kokkos options/settings required by LAMMPS
-if(Kokkos_ENABLE_HIP)
-  option(Kokkos_ENABLE_HIP_MULTIPLE_KERNEL_INSTANTIATIONS "Enable multiple kernel instantiations with HIP" ON)
-  mark_as_advanced(Kokkos_ENABLE_HIP_MULTIPLE_KERNEL_INSTANTIATIONS)
-  option(Kokkos_ENABLE_ROCTHRUST "Use RoCThrust library" ON)
-  mark_as_advanced(Kokkos_ENABLE_ROCTHRUST)
+if(Kokkos_ENABLE_CUDA)
+  message(STATUS "KOKKOS: Enabling CUDA LAMBDA function support")
+  set(Kokkos_ENABLE_CUDA_LAMBDA ON CACHE BOOL "" FORCE)
 endif()
-
 # Adding OpenMP compiler flags without the checks done for
 # BUILD_OMP can result in compile failures. Enforce consistency.
 if(Kokkos_ENABLE_OPENMP)
@@ -21,15 +18,6 @@ if(Kokkos_ENABLE_OPENMP)
     message(FATAL_ERROR "Must enable BUILD_OMP with Kokkos_ENABLE_OPENMP")
   endif()
 endif()
-
-if(Kokkos_ENABLE_SERIAL)
-  if(NOT (Kokkos_ENABLE_OPENMP OR Kokkos_ENABLE_THREADS OR
-    Kokkos_ENABLE_CUDA OR Kokkos_ENABLE_HIP OR Kokkos_ENABLE_SYCL
-    OR Kokkos_ENABLE_OPENMPTARGET))
-  option(Kokkos_ENABLE_ATOMICS_BYPASS "Disable atomics for Kokkos Serial Backend" ON)
-  mark_as_advanced(Kokkos_ENABLE_ATOMICS_BYPASS)
-  endif()
-endif()
 ########################################################################
 
 option(EXTERNAL_KOKKOS "Build against external kokkos library" OFF)
@@ -57,8 +45,8 @@ if(DOWNLOAD_KOKKOS)
   list(APPEND KOKKOS_LIB_BUILD_ARGS "-DCMAKE_CXX_EXTENSIONS=${CMAKE_CXX_EXTENSIONS}")
   list(APPEND KOKKOS_LIB_BUILD_ARGS "-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}")
   include(ExternalProject)
-  set(KOKKOS_URL "https://github.com/kokkos/kokkos/archive/4.6.00.tar.gz" CACHE STRING "URL for KOKKOS tarball")
-  set(KOKKOS_MD5 "61b2b69ae50d83eedcc7d47a3fa3d6cb" CACHE STRING "MD5 checksum of KOKKOS tarball")
+  set(KOKKOS_URL "https://github.com/kokkos/kokkos/archive/4.3.01.tar.gz" CACHE STRING "URL for KOKKOS tarball")
+  set(KOKKOS_MD5 "243de871b3dc2cf3990c1c404032df83" CACHE STRING "MD5 checksum of KOKKOS tarball")
   mark_as_advanced(KOKKOS_URL)
   mark_as_advanced(KOKKOS_MD5)
   GetFallbackURL(KOKKOS_URL KOKKOS_FALLBACK)
@@ -83,7 +71,7 @@ if(DOWNLOAD_KOKKOS)
   add_dependencies(LAMMPS::KOKKOSCORE kokkos_build)
   add_dependencies(LAMMPS::KOKKOSCONTAINERS kokkos_build)
 elseif(EXTERNAL_KOKKOS)
-  find_package(Kokkos 4.6.00 REQUIRED CONFIG)
+  find_package(Kokkos 4.3.01 REQUIRED CONFIG)
   target_link_libraries(lammps PRIVATE Kokkos::kokkos)
 else()
   set(LAMMPS_LIB_KOKKOS_SRC_DIR ${LAMMPS_LIB_SOURCE_DIR}/kokkos)
@@ -139,7 +127,7 @@ if(PKG_KSPACE)
                                  ${KOKKOS_PKG_SOURCES_DIR}/grid3d_kokkos.cpp
                                  ${KOKKOS_PKG_SOURCES_DIR}/remap_kokkos.cpp)
   set(FFT_KOKKOS "KISS" CACHE STRING "FFT library for Kokkos-enabled KSPACE package")
-  set(FFT_KOKKOS_VALUES KISS FFTW3 MKL NVPL HIPFFT CUFFT MKL_GPU)
+  set(FFT_KOKKOS_VALUES KISS FFTW3 MKL HIPFFT CUFFT)
   set_property(CACHE FFT_KOKKOS PROPERTY STRINGS ${FFT_KOKKOS_VALUES})
   validate_option(FFT_KOKKOS FFT_KOKKOS_VALUES)
   string(TOUPPER ${FFT_KOKKOS} FFT_KOKKOS)
@@ -149,8 +137,10 @@ if(PKG_KSPACE)
       message(FATAL_ERROR "The CUDA backend of Kokkos requires either KISS FFT or CUFFT.")
     elseif(FFT_KOKKOS STREQUAL "KISS")
       message(WARNING "Using KISS FFT with the CUDA backend of Kokkos may be sub-optimal.")
+      target_compile_definitions(lammps PRIVATE -DFFT_KOKKOS_KISS)
     elseif(FFT_KOKKOS STREQUAL "CUFFT")
       find_package(CUDAToolkit REQUIRED)
+      target_compile_definitions(lammps PRIVATE -DFFT_KOKKOS_CUFFT)
       target_link_libraries(lammps PRIVATE CUDA::cufft)
     endif()
   elseif(Kokkos_ENABLE_HIP)
@@ -162,21 +152,10 @@ if(PKG_KSPACE)
     elseif(FFT_KOKKOS STREQUAL "HIPFFT")
       include(DetectHIPInstallation)
       find_package(hipfft REQUIRED)
+      target_compile_definitions(lammps PRIVATE -DFFT_KOKKOS_HIPFFT)
       target_link_libraries(lammps PRIVATE hip::hipfft)
     endif()
-  elseif(FFT_KOKKOS STREQUAL "MKL_GPU")
-    if(NOT Kokkos_ENABLE_SYCL)
-      message(FATAL_ERROR "Using MKL_GPU FFT currently requires the SYCL backend of Kokkos.")
-    endif()
-    find_package(MKL REQUIRED)
-    target_link_libraries(lammps PRIVATE mkl_sycl_dft mkl_intel_ilp64 mkl_tbb_thread mkl_core tbb)
-  elseif(FFT_KOKKOS STREQUAL "MKL")
-    find_package(MKL REQUIRED)
-  elseif(FFT_KOKKOS STREQUAL "NVPL")
-      find_package(nvpl_fft REQUIRED)
-      target_link_libraries(lammps PRIVATE nvpl::fftw)
   endif()
-  target_compile_definitions(lammps PRIVATE -DFFT_KOKKOS_${FFT_KOKKOS})
 endif()
 
 if(PKG_ML-IAP)

cmake/Modules/Packages/KSPACE.cmake

@@ -10,7 +10,7 @@ if(${FFTW}_FOUND)
 else()
   set(FFT "KISS" CACHE STRING "FFT library for KSPACE package")
 endif()
-set(FFT_VALUES KISS FFTW3 MKL NVPL)
+set(FFT_VALUES KISS FFTW3 MKL)
 set_property(CACHE FFT PROPERTY STRINGS ${FFT_VALUES})
 validate_option(FFT FFT_VALUES)
 string(TOUPPER ${FFT} FFT)
@@ -41,10 +41,6 @@ elseif(FFT STREQUAL "MKL")
     target_compile_definitions(lammps PRIVATE -DFFT_MKL_THREADS)
   endif()
   target_link_libraries(lammps PRIVATE MKL::MKL)
-elseif(FFT STREQUAL "NVPL")
-  find_package(nvpl_fft REQUIRED)
-  target_compile_definitions(lammps PRIVATE -DFFT_NVPL)
-  target_link_libraries(lammps PRIVATE nvpl::fftw)
 else()
   # last option is KISSFFT
   target_compile_definitions(lammps PRIVATE -DFFT_KISS)

cmake/Modules/Packages/ML-IAP.cmake

@@ -24,7 +24,9 @@ if(MLIAP_ENABLE_PYTHON)
   if(NOT PKG_PYTHON)
     message(FATAL_ERROR "Must enable PYTHON package for including Python support in ML-IAP")
   endif()
-  # Python version check is in main CMakeLists.txt file
+  if(Python_VERSION VERSION_LESS 3.6)
+    message(FATAL_ERROR "Python support in ML-IAP requires Python 3.6 or later")
+  endif()
 
   set(MLIAP_BINARY_DIR ${CMAKE_BINARY_DIR}/cython)
   file(GLOB MLIAP_CYTHON_SRC CONFIGURE_DEPENDS ${LAMMPS_SOURCE_DIR}/ML-IAP/*.pyx)

cmake/Modules/Packages/ML-PACE.cmake

@@ -1,62 +1,57 @@
 # PACE library support for ML-PACE package
-find_package(pace QUIET)
 
-if(pace_FOUND)
-    find_package(pace)
-    target_link_libraries(lammps PRIVATE pace::pace)
-else()
-    # set policy to silence warnings about timestamps of downloaded files. review occasionally if it may be set to NEW
-    if(POLICY CMP0135)
-      cmake_policy(SET CMP0135 OLD)
-    endif()
-
-    set(PACELIB_URL "https://github.com/ICAMS/lammps-user-pace/archive/refs/tags/v.2023.11.25.fix2.tar.gz" CACHE STRING "URL for PACE evaluator library sources")
-    set(PACELIB_MD5 "a53bd87cfee8b07d9f44bc17aad69c3f" CACHE STRING "MD5 checksum of PACE evaluator library tarball")
-    mark_as_advanced(PACELIB_URL)
-    mark_as_advanced(PACELIB_MD5)
-    GetFallbackURL(PACELIB_URL PACELIB_FALLBACK)
-
-    # LOCAL_ML-PACE points to top-level dir with local lammps-user-pace repo,
-    # to make it easier to check local build without going through the public github releases
-    if(LOCAL_ML-PACE)
-     set(lib-pace "${LOCAL_ML-PACE}")
-    else()
-      # download library sources to build folder
-      if(EXISTS ${CMAKE_BINARY_DIR}/libpace.tar.gz)
-        file(MD5 ${CMAKE_BINARY_DIR}/libpace.tar.gz DL_MD5)
-      endif()
-      if(NOT "${DL_MD5}" STREQUAL "${PACELIB_MD5}")
-        message(STATUS "Downloading ${PACELIB_URL}")
-        file(DOWNLOAD ${PACELIB_URL} ${CMAKE_BINARY_DIR}/libpace.tar.gz STATUS DL_STATUS SHOW_PROGRESS)
-        file(MD5 ${CMAKE_BINARY_DIR}/libpace.tar.gz DL_MD5)
-        if((NOT DL_STATUS EQUAL 0) OR (NOT "${DL_MD5}" STREQUAL "${PACELIB_MD5}"))
-          message(WARNING "Download from primary URL ${PACELIB_URL} failed\nTrying fallback URL ${PACELIB_FALLBACK}")
-          file(DOWNLOAD ${PACELIB_FALLBACK} ${CMAKE_BINARY_DIR}/libpace.tar.gz EXPECTED_HASH MD5=${PACELIB_MD5} SHOW_PROGRESS)
-        endif()
-      else()
-        message(STATUS "Using already downloaded archive ${CMAKE_BINARY_DIR}/libpace.tar.gz")
-      endif()
-
-
-      # uncompress downloaded sources
-      execute_process(
-        COMMAND ${CMAKE_COMMAND} -E remove_directory lammps-user-pace*
-        COMMAND ${CMAKE_COMMAND} -E tar xzf libpace.tar.gz
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      )
-      get_newest_file(${CMAKE_BINARY_DIR}/lammps-user-pace-* lib-pace)
-    endif()
-
-    # some preinstalled yaml-cpp versions don't provide a namespaced target
-    find_package(yaml-cpp QUIET)
-    if(TARGET yaml-cpp AND NOT TARGET yaml-cpp::yaml-cpp)
-      add_library(yaml-cpp::yaml-cpp ALIAS yaml-cpp)
-    endif()
-
-    add_subdirectory(${lib-pace} build-pace)
-    set_target_properties(pace PROPERTIES CXX_EXTENSIONS ON OUTPUT_NAME lammps_pace${LAMMPS_MACHINE})
-
-    if(CMAKE_PROJECT_NAME STREQUAL "lammps")
-      target_link_libraries(lammps PRIVATE pace)
-    endif()
+# set policy to silence warnings about timestamps of downloaded files. review occasionally if it may be set to NEW
+if(POLICY CMP0135)
+  cmake_policy(SET CMP0135 OLD)
+endif()
+
+set(PACELIB_URL "https://github.com/ICAMS/lammps-user-pace/archive/refs/tags/v.2023.11.25.fix.tar.gz" CACHE STRING "URL for PACE evaluator library sources")
+set(PACELIB_MD5 "b45de9a633f42ed65422567e3ce56f9f" CACHE STRING "MD5 checksum of PACE evaluator library tarball")
+mark_as_advanced(PACELIB_URL)
+mark_as_advanced(PACELIB_MD5)
+GetFallbackURL(PACELIB_URL PACELIB_FALLBACK)
+
+# LOCAL_ML-PACE points to top-level dir with local lammps-user-pace repo,
+# to make it easier to check local build without going through the public github releases
+if(LOCAL_ML-PACE)
+ set(lib-pace "${LOCAL_ML-PACE}")
+else()
+  # download library sources to build folder
+  if(EXISTS ${CMAKE_BINARY_DIR}/libpace.tar.gz)
+    file(MD5 ${CMAKE_BINARY_DIR}/libpace.tar.gz DL_MD5)
+  endif()
+  if(NOT "${DL_MD5}" STREQUAL "${PACELIB_MD5}")
+    message(STATUS "Downloading ${PACELIB_URL}")
+    file(DOWNLOAD ${PACELIB_URL} ${CMAKE_BINARY_DIR}/libpace.tar.gz STATUS DL_STATUS SHOW_PROGRESS)
+    file(MD5 ${CMAKE_BINARY_DIR}/libpace.tar.gz DL_MD5)
+    if((NOT DL_STATUS EQUAL 0) OR (NOT "${DL_MD5}" STREQUAL "${PACELIB_MD5}"))
+      message(WARNING "Download from primary URL ${PACELIB_URL} failed\nTrying fallback URL ${PACELIB_FALLBACK}")
+      file(DOWNLOAD ${PACELIB_FALLBACK} ${CMAKE_BINARY_DIR}/libpace.tar.gz EXPECTED_HASH MD5=${PACELIB_MD5} SHOW_PROGRESS)
+    endif()
+  else()
+    message(STATUS "Using already downloaded archive ${CMAKE_BINARY_DIR}/libpace.tar.gz")
+  endif()
+
+
+  # uncompress downloaded sources
+  execute_process(
+    COMMAND ${CMAKE_COMMAND} -E remove_directory lammps-user-pace*
+    COMMAND ${CMAKE_COMMAND} -E tar xzf libpace.tar.gz
+    WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+  )
+  get_newest_file(${CMAKE_BINARY_DIR}/lammps-user-pace-* lib-pace)
+
+  # fixup yaml-cpp/emitterutils.cpp for GCC 15+ until patch is applied
+  file(READ ${lib-pace}/yaml-cpp/src/emitterutils.cpp yaml_emitterutils)
+  string(REPLACE "#include <sstream>" "#include <sstream>\n#include <cinttypes>" yaml_tmp_emitterutils "${yaml_emitterutils}")
+  string(REPLACE "#include <cinttypes>\n#include <cinttypes>" "#include <cinttypes>" yaml_emitterutils "${yaml_tmp_emitterutils}")
+  file(WRITE ${lib-pace}/yaml-cpp/src/emitterutils.cpp "${yaml_emitterutils}")
+
+endif()
+
+add_subdirectory(${lib-pace} build-pace)
+set_target_properties(pace PROPERTIES CXX_EXTENSIONS ON OUTPUT_NAME lammps_pace${LAMMPS_MACHINE})
+
+if(CMAKE_PROJECT_NAME STREQUAL "lammps")
+  target_link_libraries(lammps PRIVATE pace)
 endif()

cmake/Modules/Packages/ML-QUIP.cmake

@@ -37,7 +37,7 @@ if(DOWNLOAD_QUIP)
   endforeach()
   # Fix cmake crashing when MATH_LINKOPTS not set, required for e.g. recent Cray Programming Environment
   set(temp "${temp} -L/_DUMMY_PATH_\n")
-  set(temp "${temp}PYTHON=${Python_EXECUTABLE}\nPIP=pip\nEXTRA_LINKOPTS=\n")
+  set(temp "${temp}PYTHON=python\nPIP=pip\nEXTRA_LINKOPTS=\n")
   set(temp "${temp}HAVE_CP2K=0\nHAVE_VASP=0\nHAVE_TB=0\nHAVE_PRECON=1\nHAVE_LOTF=0\nHAVE_ONIOM=0\n")
   set(temp "${temp}HAVE_LOCAL_E_MIX=0\nHAVE_QC=0\nHAVE_GAP=1\nHAVE_DESCRIPTORS_NONCOMMERCIAL=1\n")
   set(temp "${temp}HAVE_TURBOGAP=0\nHAVE_QR=1\nHAVE_THIRDPARTY=0\nHAVE_FX=0\nHAVE_SCME=0\nHAVE_MTP=0\n")

cmake/Modules/Packages/PLUMED.cmake

@@ -32,21 +32,14 @@ endif()
 
 # Note: must also adjust check for supported API versions in
 # fix_plumed.cpp when version changes from v2.n.x to v2.n+1.y
-set(PLUMED_URL "https://github.com/plumed/plumed2/releases/download/v2.9.3/plumed-src-2.9.3.tgz"
+set(PLUMED_URL "https://github.com/plumed/plumed2/releases/download/v2.9.1/plumed-src-2.9.1.tgz"
   CACHE STRING "URL for PLUMED tarball")
-set(PLUMED_MD5 "ee1249805fe94bccee17d10610d3f6f1" CACHE STRING "MD5 checksum of PLUMED tarball")
+set(PLUMED_MD5 "c3b2d31479c1e9ce211719d40e9efbd7" CACHE STRING "MD5 checksum of PLUMED tarball")
 
 mark_as_advanced(PLUMED_URL)
 mark_as_advanced(PLUMED_MD5)
 GetFallbackURL(PLUMED_URL PLUMED_FALLBACK)
 
-# adjust C++ standard support for self-compiled Plumed2
-if(CMAKE_CXX_STANDARD GREATER 11)
-  set(PLUMED_CXX_STANDARD 14)
-else()
-  set(PLUMED_CXX_STANDARD 11)
-endif()
-
 if((CMAKE_SYSTEM_NAME STREQUAL "Windows") AND (CMAKE_CROSSCOMPILING))
   if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
     set(CROSS_CONFIGURE mingw64-configure)
@@ -62,7 +55,7 @@ if((CMAKE_SYSTEM_NAME STREQUAL "Windows") AND (CMAKE_CROSSCOMPILING))
     URL_MD5 ${PLUMED_MD5}
     BUILD_IN_SOURCE 1
     CONFIGURE_COMMAND ${CROSS_CONFIGURE} --disable-shared --disable-bsymbolic
-                                         --disable-python --enable-cxx=${PLUMED_CXX_STANDARD}
+                                         --disable-python --enable-cxx=11
                                          --enable-modules=-adjmat:+crystallization:-dimred:+drr:+eds:-fisst:+funnel:+logmfd:+manyrestraints:+maze:+opes:+multicolvar:-pamm:-piv:+s2cm:-sasa:-ves
                                          ${PLUMED_CONFIG_OMP}
                                          ${PLUMED_CONFIG_MPI}
@@ -149,7 +142,7 @@ else()
       CONFIGURE_COMMAND <SOURCE_DIR>/configure --prefix=<INSTALL_DIR>
                                              ${CONFIGURE_REQUEST_PIC}
                                              --enable-modules=all
-                                             --enable-cxx=${PLUMED_CXX_STANDARD}
+                                             --enable-cxx=11
                                              --disable-python
                                              ${PLUMED_CONFIG_MPI}
                                              ${PLUMED_CONFIG_OMP}

cmake/Modules/Packages/PYTHON.cmake

@@ -1,6 +1,6 @@
 
 if(NOT Python_INTERPRETER)
-  # backward compatibility with older LAMMPS documentation
+  # backward compatibility with CMake before 3.12 and older LAMMPS documentation
   if(PYTHON_EXECUTABLE)
     set(Python_EXECUTABLE ${PYTHON_EXECUTABLE})
   endif()

cmake/Modules/Packages/RHEO.cmake

@@ -0,0 +1,2 @@
+find_package(GSL 2.6 REQUIRED)
+target_link_libraries(lammps PRIVATE GSL::gsl)

cmake/Modules/Packages/VORONOI.cmake

@@ -54,5 +54,5 @@ else()
   if(NOT VORO_FOUND)
     message(FATAL_ERROR "Voro++ library not found. Help CMake to find it by setting VORO_LIBRARY and VORO_INCLUDE_DIR, or set DOWNLOAD_VORO=ON to download it")
   endif()
-  target_link_libraries(lammps PRIVATE VORO::voro++)
+  target_link_libraries(lammps PRIVATE VORO::VORO)
 endif()

cmake/packaging/linux_wrapper.sh

@@ -7,6 +7,11 @@ export LC_ALL=C
 BASEDIR="$(dirname "$0")"
 EXENAME="$(basename "$0")"
 
+# save old settings (for restoring them later)
+OLDPATH="${PATH}"
+OLDLDLIB="${LD_LIBRARY_PATH}"
+
+# prepend path to find our custom executables
 PATH="${BASEDIR}/bin:${PATH}"
 
 # append to LD_LIBRARY_PATH to prefer local (newer) libs
@@ -15,6 +20,8 @@ LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${BASEDIR}/lib"
 # set some environment variables for LAMMPS etc.
 LAMMPS_POTENTIALS="${BASEDIR}/share/lammps/potentials"
 MSI2LMP_LIBRARY="${BASEDIR}/share/lammps/frc_files"
-export LD_LIBRARY_PATH LAMMPS_POTENTIALS MSI2LMP_LIBRARY PATH
+
+# export everything
+export LD_LIBRARY_PATH LAMMPS_POTENTIALS MSI2LMP_LIBRARY PATH OLDPATH OLDLDLIB
 
 exec "${BASEDIR}/bin/${EXENAME}" "$@"

cmake/packaging/xdg-open

@@ -33,6 +33,14 @@
 #
 #---------------------------------------------
 
+# restore previously saved environment variables, if available
+if [ -n "${OLDPATH}" ]
+then
+    PATH="${OLDPATH}"
+    LD_LIBRARY_PATH="${OLDLDLIB}"
+    export PATH LD_LIBRARY_PATH
+fi
+
 NEW_LIBRARY_PATH="/usr/local/lib64"
 for s in $(echo $LD_LIBRARY_PATH | sed -e 's/:/ /g')
 do \

cmake/presets/kokkos-cuda.cmake

@@ -1,9 +1,8 @@
 # preset that enables KOKKOS and selects CUDA compilation with OpenMP
-# enabled as well. The GPU architecture *must* match your hardware
+# enabled as well. The GPU architecture *must* match your hardware (If not manually set, Kokkos will try to autodetect it).
 set(PKG_KOKKOS ON CACHE BOOL "" FORCE)
 set(Kokkos_ENABLE_SERIAL ON CACHE BOOL "" FORCE)
 set(Kokkos_ENABLE_CUDA   ON CACHE BOOL "" FORCE)
-set(Kokkos_ARCH_PASCAL60 ON CACHE BOOL "" FORCE)
 set(BUILD_OMP ON CACHE BOOL "" FORCE)
 get_filename_component(NVCC_WRAPPER_CMD ${CMAKE_CURRENT_SOURCE_DIR}/../lib/kokkos/bin/nvcc_wrapper ABSOLUTE)
 set(CMAKE_CXX_COMPILER ${NVCC_WRAPPER_CMD} CACHE FILEPATH "" FORCE)

cmake/presets/kokkos-sycl-intel.cmake

@@ -1,29 +0,0 @@
-# preset that enables KOKKOS and selects SYCL compilation with OpenMP
-# enabled as well. Also sets some performance related compiler flags.
-set(PKG_KOKKOS ON CACHE BOOL "" FORCE)
-set(Kokkos_ENABLE_SERIAL ON CACHE BOOL "" FORCE)
-set(Kokkos_ENABLE_OPENMP ON CACHE BOOL "" FORCE)
-set(Kokkos_ENABLE_CUDA   OFF CACHE BOOL "" FORCE)
-set(Kokkos_ENABLE_SYCL   ON CACHE BOOL "" FORCE)
-
-set(FFT "MKL" CACHE STRING "" FORCE)
-set(FFT_KOKKOS "MKL_GPU" CACHE STRING "" FORCE)
-
-unset(USE_INTERNAL_LINALG)
-unset(USE_INTERNAL_LINALG CACHE)
-set(BLAS_VENDOR "Intel10_64_dyn")
-
-# hide deprecation warnings temporarily for stable release
-set(Kokkos_ENABLE_DEPRECATION_WARNINGS OFF CACHE BOOL "" FORCE)
-
-set(CMAKE_CXX_COMPILER icpx CACHE STRING "" FORCE)
-set(CMAKE_C_COMPILER icx CACHE STRING "" FORCE)
-set(CMAKE_Fortran_COMPILER "" CACHE STRING "" FORCE)
-set(MPI_CXX_COMPILER "mpicxx" CACHE STRING "" FORCE)
-set(CMAKE_CXX_STANDARD 17 CACHE STRING "" FORCE)
-# Silence everything
-set(CMAKE_CXX_FLAGS "-w" CACHE STRING "" FORCE)
-#set(CMAKE_EXE_LINKER_FLAGS "-fsycl -flink-huge-device-code -fsycl-targets=spir64_gen " CACHE STRING "" FORCE)
-#set(CMAKE_TUNE_FLAGS "-O3 -fsycl -fsycl-device-code-split=per_kernel -fsycl-targets=spir64_gen" CACHE STRING "" FORCE)
-set(CMAKE_EXE_LINKER_FLAGS "-fsycl -flink-huge-device-code " CACHE STRING "" FORCE)
-set(CMAKE_TUNE_FLAGS "-O3 -fsycl -fsycl-device-code-split=per_kernel " CACHE STRING "" FORCE)

cmake/presets/mingw-cross.cmake

@@ -67,7 +67,6 @@ set(WIN_PACKAGES
   REACTION
   REAXFF
   REPLICA
-  RHEO
   RIGID
   SHOCK
   SMTBQ

cmake/presets/most.cmake

@@ -60,7 +60,6 @@ set(ALL_PACKAGES
   REACTION
   REAXFF
   REPLICA
-  RHEO
   RIGID
   SHOCK
   SPH

cmake/presets/oneapi.cmake

@@ -3,9 +3,26 @@
 set(CMAKE_CXX_COMPILER "icpx" CACHE STRING "" FORCE)
 set(CMAKE_C_COMPILER "icx" CACHE STRING "" FORCE)
 set(CMAKE_Fortran_COMPILER "ifx" CACHE STRING "" FORCE)
+set(CMAKE_CXX_FLAGS_DEBUG "-Wall -Wextra -g" CACHE STRING "" FORCE)
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-Wall -Wextra -g -O2 -DNDEBUG" CACHE STRING "" FORCE)
+set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG" CACHE STRING "" FORCE)
+set(CMAKE_Fortran_FLAGS_DEBUG "-Wall -Wextra -g" CACHE STRING "" FORCE)
+set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO "-Wall -Wextra -g -O2 -DNDEBUG" CACHE STRING "" FORCE)
+set(CMAKE_Fortran_FLAGS_RELEASE "-O3 -DNDEBUG" CACHE STRING "" FORCE)
+set(CMAKE_C_FLAGS_DEBUG "-Wall -Wextra -g" CACHE STRING "" FORCE)
+set(CMAKE_C_FLAGS_RELWITHDEBINFO "-Wall -Wextra -g -O2 -DNDEBUG" CACHE STRING "" FORCE)
+set(CMAKE_C_FLAGS_RELEASE "-O3 -DNDEBUG" CACHE STRING "" FORCE)
+
 set(MPI_CXX "icpx" CACHE STRING "" FORCE)
 set(MPI_CXX_COMPILER "mpicxx" CACHE STRING "" FORCE)
 
-# force using internal BLAS/LAPCK since external ones may not be ABI compatible
-set(USE_INTERNAL_LINALG ON CACHE BOOL "" FORCE)
+unset(HAVE_OMP_H_INCLUDE CACHE)
+set(OpenMP_C "icx" CACHE STRING "" FORCE)
+set(OpenMP_C_FLAGS "-qopenmp;-qopenmp-simd" CACHE STRING "" FORCE)
+set(OpenMP_C_LIB_NAMES "omp" CACHE STRING "" FORCE)
+set(OpenMP_CXX "icpx" CACHE STRING "" FORCE)
+set(OpenMP_CXX_FLAGS "-qopenmp;-qopenmp-simd" CACHE STRING "" FORCE)
+set(OpenMP_CXX_LIB_NAMES "omp" CACHE STRING "" FORCE)
+set(OpenMP_Fortran_FLAGS "-qopenmp;-qopenmp-simd" CACHE STRING "" FORCE)
+set(OpenMP_omp_LIBRARY "libiomp5.so" CACHE PATH "" FORCE)
 

cmake/presets/windows.cmake

@@ -60,7 +60,6 @@ set(WIN_PACKAGES
   REACTION
   REAXFF
   REPLICA
-  RHEO
   RIGID
   SHOCK
   SMTBQ

doc/.gitignore

@@ -17,10 +17,3 @@
 *.el
 /utils/sphinx-config/_static/mathjax
 /utils/sphinx-config/_static/polyfill.js
-/src/pairs.rst
-/src/bonds.rst
-/src/angles.rst
-/src/dihedrals.rst
-/src/impropers.rst
-/src/computes.rst
-/src/fixes.rst

doc/Makefile

@@ -17,11 +17,9 @@ MATHJAXTAG     = 3.2.2
 
 PYTHON         = $(word 3,$(shell type python3))
 DOXYGEN        = $(word 3,$(shell type doxygen))
-PANDOC         = $(word 3,$(shell type pandoc))
 HAS_PYTHON3    = NO
 HAS_DOXYGEN    = NO
 HAS_PDFLATEX   = NO
-HAS_PANDOC     = NO
 
 ifeq ($(shell type python3 >/dev/null 2>&1; echo $$?), 0)
 HAS_PYTHON3    = YES
@@ -33,14 +31,10 @@ endif
 
 ifeq ($(shell type pdflatex >/dev/null 2>&1; echo $$?), 0)
 ifeq ($(shell type latexmk >/dev/null 2>&1; echo $$?), 0)
-HAS_PDFLATEX   = YES
+HAS_PDFLATEX = YES
 endif
 endif
 
-ifeq ($(shell type pandoc >/dev/null 2>&1; echo $$?), 0)
-HAS_PANDOC     = YES
-endif
-
 # override settings for PIP commands
 # PIP_OPTIONS = --cert /etc/pki/ca-trust/extracted/openssl/ca-bundle.trust.crt --proxy http://proxy.mydomain.org
 
@@ -51,9 +45,8 @@ SPHINXEXTRA = -j $(shell $(PYTHON) -c 'import multiprocessing;print(multiprocess
 # we only want to use explicitly listed files.
 DOXYFILES      = $(shell sed -n -e 's/\#.*$$//' -e '/^ *INPUT \+=/,/^[A-Z_]\+ \+=/p' doxygen/Doxyfile.in | sed -e 's/@LAMMPS_SOURCE_DIR@/..\/src/g' -e 's/\\//g' -e 's/ \+/ /' -e 's/[A-Z_]\+ \+= *\(YES\|NO\|\)//') 
 
-.PHONY: help clean-all clean clean-spelling epub mobi html pdf spelling anchor_check style_check char_check role_check xmlgen fasthtml fasthtml-init 
+.PHONY: help clean-all clean clean-spelling epub mobi html pdf spelling anchor_check style_check char_check role_check xmlgen fasthtml
 
-FASTHTMLFILES = $(patsubst $(RSTDIR)/%.rst,fasthtml/%.html,$(wildcard $(RSTDIR)/*rst))
 # ------------------------------------------
 
 help:
@@ -90,10 +83,7 @@ $(SPHINXCONFIG)/conf.py: $(SPHINXCONFIG)/conf.py.in
 	    -e 's,@LAMMPS_PYTHON_DIR@,$(BUILDDIR)/../python,g' \
 	    -e 's,@LAMMPS_DOC_DIR@,$(BUILDDIR),g' $< > $@
 
-globbed-tocs:
-	$(PYTHON) $(BUILDDIR)/utils/make-globbed-tocs.py -d $(RSTDIR)
-
-html: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJAX)
+html: xmlgen $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJAX)
 	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
 	@$(MAKE) $(MFLAGS) -C graphviz all
 	@(\
@@ -112,8 +102,6 @@ html: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJ
 		env LC_ALL=C grep -n ':\(ref\|doc\):[^`]' $(RSTDIR)/*.rst ;\
 		env LC_ALL=C grep -n '\(ref\|doc\)`[^`]' $(RSTDIR)/*.rst ;\
 		$(PYTHON) $(BUILDDIR)/utils/check-styles.py -s ../src -d src ;\
-		env LC_ALL=C grep -n -E '^ *\.\. [a-z0-9]+:(\s+.*|)$$' \
-                         $(RSTDIR)/*.rst ../src/*.{cpp,h} ../src/*/*.{cpp,h} ;\
 		echo "############################################" ;\
 		deactivate ;\
 	)
@@ -125,24 +113,26 @@ html: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJ
 	@rm -rf html/PDF/.[sg]*
 	@echo "Build finished. The HTML pages are in doc/html."
 
-fasthtml: fasthtml-init $(FASTHTMLFILES)
+fasthtml: xmlgen $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK) $(MATHJAX)
+	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
+	@$(MAKE) $(MFLAGS) -C graphviz all
+	@mkdir -p fasthtml
+	@(\
+		. $(VENV)/bin/activate ; env PYTHONWARNINGS= PYTHONDONTWRITEBYTECODE=1 \
+		sphinx-build $(SPHINXEXTRA) -b html -c $(SPHINXCONFIG) -d $(BUILDDIR)/fasthtml/doctrees $(RSTDIR) fasthtml ;\
+		touch $(RSTDIR)/Fortran.rst ; env PYTHONWARNINGS= PYTHONDONTWRITEBYTECODE=1 \
+		sphinx-build $(SPHINXEXTRA) -b html -c $(SPHINXCONFIG) -d $(BUILDDIR)/fasthtml/doctrees $(RSTDIR) fasthtml ;\
+		deactivate ;\
+	)
+	@rm -rf fasthtml/_sources
+	@rm -rf fasthtml/PDF
+	@rm -rf fasthtml/USER
+	@rm -rf fasthtml/JPG
+	@cp -r src/PDF fasthtml/PDF
+	@rm -rf fasthtml/PDF/.[sg]*
 	@echo "Fast HTML build finished. The HTML pages are in doc/fasthtml."
 
-fasthtml-init:
-	@mkdir -p fasthtml/JPG
-	@cp src/JPG/*.* fasthtml/JPG
-	@cp $(RSTDIR)/accel_styles.rst $(RSTDIR)/lepton_expression.rst fasthtml/
-	@cp $(BUILDDIR)/utils/pandoc.css fasthtml/
-
-fasthtml/%.html: $(RSTDIR)/%.rst
-	@if [ "$(HAS_PANDOC)" == "NO" ] ; then echo "Make 'fasthtml' requires the 'pandoc' software" 1>&2; exit 1; fi
-	@mkdir -p fasthtml
-	@echo converting $< to $@
-	@sed -e 's/\\AA/\\mathring{\\mathrm{A}}/g' $< > fasthtml/$*.temp.rst
-	@pandoc -s --mathml --css="pandoc.css" --template=$(BUILDDIR)/utils/pandoc.html --metadata title="$@" -o $@ fasthtml/$*.temp.rst
-	@rm -f fasthtml/$*.temp.rst
-
-spelling: xmlgen globbed-tocs $(SPHINXCONFIG)/conf.py $(VENV) $(SPHINXCONFIG)/false_positives.txt
+spelling: xmlgen $(SPHINXCONFIG)/conf.py $(VENV) $(SPHINXCONFIG)/false_positives.txt
 	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
 	@(\
 		. $(VENV)/bin/activate ; \
@@ -153,7 +143,7 @@ spelling: xmlgen globbed-tocs $(SPHINXCONFIG)/conf.py $(VENV) $(SPHINXCONFIG)/fa
 	)
 	@echo "Spell check finished."
 
-epub: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK)
+epub: xmlgen $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK)
 	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
 	@$(MAKE) $(MFLAGS) -C graphviz all
 	@mkdir -p epub/JPG
@@ -176,7 +166,7 @@ mobi: epub
 	@ebook-convert LAMMPS.epub LAMMPS.mobi
 	@echo "Conversion finished. The MOBI manual file is created."
 
-pdf: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK)
+pdf: xmlgen $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK)
 	@if [ "$(HAS_BASH)" == "NO" ] ; then echo "bash was not found at $(OSHELL)! Please use: $(MAKE) SHELL=/path/to/bash" 1>&2; exit 1; fi
 	@$(MAKE) $(MFLAGS) -C graphviz all
 	@if [ "$(HAS_PDFLATEX)" == "NO" ] ; then echo "PDFLaTeX or latexmk were not found! Please check README for further instructions" 1>&2; exit 1; fi
@@ -195,8 +185,6 @@ pdf: xmlgen globbed-tocs $(VENV) $(SPHINXCONFIG)/conf.py $(ANCHORCHECK)
 		env LC_ALL=C grep -n ':\(ref\|doc\):[^`]' $(RSTDIR)/*.rst ;\
 		env LC_ALL=C grep -n '\(ref\|doc\)`[^`]' $(RSTDIR)/*.rst ;\
 		$(PYTHON) utils/check-styles.py -s ../src -d src ;\
-		env LC_ALL=C grep -n -E '^ *\.\. [a-z0-9]+:(\s+.*|)$$' \
-                         $(RSTDIR)/*.rst ../src/*.{cpp,h} ../src/*/*.{cpp,h} ;\
 		echo "############################################" ;\
 		deactivate ;\
 	)
@@ -246,8 +234,6 @@ role_check :
 	@( env LC_ALL=C grep -n ' `[^`]\+<[a-z][^`]\+`[^_]' $(RSTDIR)/*.rst && exit 1 || : )
 	@( env LC_ALL=C grep -n ':\(ref\|doc\):[^`]' $(RSTDIR)/*.rst && exit 1 || : )
 	@( env LC_ALL=C grep -n '\(ref\|doc\)`[^`]' $(RSTDIR)/*.rst && exit 1 || : )
-	@( env LC_ALL=C grep -n -E '^ *\.\. [a-z0-9]+:(\s+.*|)$$' \
-                        $(RSTDIR)/*.rst ../src/*.{cpp,h} ../src/*/*.{cpp,h} && exit 1 || : )
 
 link_check : $(VENV) html
 	@(\

doc/README

@@ -22,12 +22,12 @@ doxygen-warn.log  logfile with warnings from running doxygen
 and:
 
 github-development-workflow.md   notes on the LAMMPS development workflow
+include-file-conventions.md      notes on LAMMPS' include file conventions
 documentation_conventions.md     notes on writing documentation for LAMMPS
 
 If you downloaded a LAMMPS tarball from www.lammps.org, then the html
 folder and the PDF manual should be included. If you downloaded LAMMPS
-using GitHub then you either need to build them yourself or read the
-online version at https://docs.lammps.org/
+from GitHub then you either need to build them.
 
 You can build the HTML and PDF files yourself, by typing "make html"
 or by "make pdf", respectively.  This requires various tools and files.
@@ -39,10 +39,10 @@ environment and local folders.
 
 Installing prerequisites for the documentation build
 
-To run the HTML documention build toolchain, python 3.8 or later,
-doxygen 1.8.10 or later, git, and the venv python module have to be
-installed if not already available.  Also internet access is initially
-required to download external files and tools.
+To run the HTML documention build toolchain, python 3.x, doxygen, git,
+and the venv python module have to be installed if not already available.
+Also internet access is initially required to download external files
+and tools.
 
 Building the PDF format manual requires in addition a compatible LaTeX
 installation with support for PDFLaTeX and several add-on LaTeX packages
@@ -52,24 +52,16 @@ installed.  This includes:
 - babel
 - capt-of
 - cmap
-- dvipng
-- ellipse
 - fncychap
-- fontawesom
 - framed
 - geometry
-- gyre
 - hyperref
 - hypcap
 - needspace
-- pict2e
 - times
 - tabulary
-- titlesec
 - upquote
 - wrapfig
-- xindy
-
 Also the latexmk script is required to run PDFLaTeX and related tools.
 the required number of times to have self-consistent output and include
 updated bibliography and indices.

doc/documentation_conventions.md

@@ -10,7 +10,7 @@ Last change: 2022-12-30
 
 In fall 2019, the LAMMPS documentation file format has changed from a
 home grown markup designed to generate HTML format files only, to
-[reStructuredText](https://docutils.sourceforge.io/rst.html>).  For a
+[reStructuredText](https://docutils.sourceforge.io/rst.html>.  For a
 transition period all files in the old .txt format were transparently
 converted to .rst and then processed.  The `txt2rst tool` is still
 included in the distribution to obtain an initial .rst file for legacy
@@ -45,7 +45,8 @@ what kind of information and sections are needed.
 
 ## Formatting conventions
 
-For headlines we try to follow the conventions posted [here](https://documentation-style-guide-sphinx.readthedocs.io/en/latest/style-guide.html#headings).
+For headlines we try to follow the conventions posted here:
+https://documentation-style-guide-sphinx.readthedocs.io/en/latest/style-guide.html#headings
 It seems to be sufficient to have this consistent only within
 any single file and it is not (yet) enforced strictly, but making
 this globally consistent makes it easier to move sections around.
@@ -63,7 +64,7 @@ Groups of shell commands or LAMMPS input script or C/C++/Python source
 code should be typeset into a `.. code-block::` section. A syntax
 highlighting extension for LAMMPS input scripts is provided, so `LAMMPS`
 can be used to indicate the language in the code block in addition to
-`bash`, `c`, `c++`, `console`, `csh`, `diff`, `fortran`, `json`, `make`,
+`bash`, `c`, `c++`, `console`, `csh`, `diff', `fortran`, `json`, `make`,
 `perl`, `powershell`, `python`, `sh`, or `tcl`, `text`, or `yaml`.  When
 no syntax style is indicated, no syntax highlighting is performed.  When
 typesetting commands executed on the shell, please do not prefix
@@ -83,7 +84,7 @@ block can be used, followed by multiple `.. tab::` blocks, one
 for each alternative. This is only used for HTML output. For other
 outputs, the `.. tabs::` directive is transparently removed and
 the individual `.. tab::` blocks will be replaced with an
-`.. admonition::` block. Thus in PDF and ePUB output those will
+`.. admonition::`` block. Thus in PDF and ePUB output those will
 be realized as sequential and plain notes.
 
 Special remarks can be highlighted with a `.. note::` block and

doc/doxygen/Doxyfile.in

@@ -2,7 +2,7 @@
 
 DOXYFILE_ENCODING      = UTF-8
 PROJECT_NAME           = "LAMMPS Programmer's Guide"
-PROJECT_NUMBER         = "19 November 2024"
+PROJECT_NUMBER         = "4 May 2022"
 PROJECT_BRIEF          = "Documentation of the LAMMPS library interface and Python wrapper"
 PROJECT_LOGO           = lammps-logo.png
 CREATE_SUBDIRS         = NO

doc/github-development-workflow.md

@@ -6,9 +6,7 @@ choices the LAMMPS developers have agreed on. Git and GitHub provide the
 tools, but do not set policies, so it is up to the developers to come to
 an agreement as to how to define and interpret policies. This document
 is likely to change as our experiences and needs change, and we try to
-adapt it accordingly.
-
-Last change: 2023-02-10
+adapt it accordingly. Last change 2023-02-10.
 
 ## Table of Contents
 
@@ -74,7 +72,7 @@ be assigned to signal urgency to merge this pull request quickly.
 People can be assigned to review a pull request in two ways:
 
   * They can be assigned manually to review a pull request
-    by the submitter or a LAMMPS developer.
+    by the submitter or a LAMMPS developer
   * They can be automatically assigned, because a developer's GitHub
     handle matches a file pattern in the `.github/CODEOWNERS` file,
     which associates developers with the code they contributed and
@@ -88,9 +86,9 @@ required before merging, in addition to passing all automated
 compilation and unit tests.  Merging counts as implicit approval, so
 does submission of a pull request (by a LAMMPS developer). So the person
 doing the merge may not also submit an approving review.  The GitHub
-feature that reviews from code owners are "hard" reviews (i.e. they
-must all approve before merging is allowed) is currently disabled.
-It is at the discretion of the merge maintainer to assess when a
+feature, that reviews from code owners are "hard" reviews (i.e. they
+must all approve before merging is allowed), is currently disabled.
+It is in the discretion of the merge maintainer to assess when a
 sufficient degree of approval has been reached, especially from external
 collaborators.  Reviews may be (automatically) dismissed, when the
 reviewed code has been changed. Review may be requested a second time.
@@ -149,8 +147,7 @@ only contain bug fixes, feature additions to peripheral functionality,
 and documentation updates.  In between stable releases, bug fixes and
 infrastructure updates are back-ported from the "develop" branch to the
 "maintenance" branch and occasionally merged into "stable" and published
-as update releases. Further explanation of LAMMPS versions can be found
-[in the documentation](https://docs.lammps.org/Manual_version.html).
+as update releases.
 
 ## Project Management
 

doc/lammps.1

@@ -1,7 +1,7 @@
-.TH LAMMPS "1" "2 April 2025" "2025-04-02"
+.TH LAMMPS "1" "29 August 2024" "2024-08-29"
 .SH NAME
 .B LAMMPS
-\- Molecular Dynamics Simulator.  Version 2 April 2025
+\- Molecular Dynamics Simulator.  Version 29 August 2024
 
 .SH SYNOPSIS
 .B lmp
@@ -311,7 +311,7 @@ the chapter on errors in the
 manual gives some additional information about error messages, if possible.
 
 .SH COPYRIGHT
-© 2003--2025 Sandia Corporation
+© 2003--2024 Sandia Corporation
 
 This package is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License version 2 as

doc/msi2lmp.1

@@ -1,4 +1,4 @@
-.TH MSI2LMP "1" "v3.9.11" "2024-09-06"
+.TH MSI2LMP "1" "v3.9.10" "2023-03-10"
 .SH NAME
 .B MSI2LMP
 \- Converter for Materials Studio files to LAMMPS
@@ -101,7 +101,7 @@ msi2lmp decane -c 0 -f oplsaa
 
 
 .SH COPYRIGHT
-© 2003--2024 Sandia Corporation
+© 2003--2022 Sandia Corporation
 
 This package is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License version 2 as

doc/src/Build.rst

@@ -1,42 +1,15 @@
 Build LAMMPS
 ============
 
-LAMMPS is built as a library and an executable from source code using a
-build environment generated by CMake (Unix Makefiles, Ninja, Xcode,
-Visual Studio, KDevelop, CodeBlocks and more depending on the platform).
-Using CMake is the preferred way to build LAMMPS.  In addition, LAMMPS
-can be compiled using the legacy build system based on traditional
-makefiles for use with GNU make (which may require manual editing).
-Support for the legacy build system is slowly being phased out and may
-not be available for all optional features.
+LAMMPS is built as a library and an executable from source code using
+either traditional makefiles for use with GNU make (which may require
+manual editing), or using a build environment generated by CMake (Unix
+Makefiles, Ninja, Xcode, Visual Studio, KDevelop, CodeBlocks and more).
 
 As an alternative, you can download a package with pre-built executables
 or automated build trees, as described in the :doc:`Install <Install>`
 section of the manual.
 
-Prerequisites
--------------
-
-Which software you need to compile and use LAMMPS strongly depends on
-which :doc:`features and settings <Build_settings>` and which
-:doc:`optional packages <Packages_list>` you are trying to include.
-Common to all is that you need a C++ and C compiler, where the C++
-compiler has to support at least the C++11 standard (note that some
-compilers require command-line flag to activate C++11 support).
-Furthermore, if you are building with CMake, you need at least CMake
-version 3.20 and a compatible build tool (make or ninja-build); if you
-are building the the legacy GNU make based build system you need GNU
-make (other make variants are not going to work since the build system
-uses features unique to GNU make) and a Unix-like build environment with
-a Bourne shell, and shell tools like "sed", "grep", "touch", "test",
-"tr", "cp", "mv", "rm", "ln", "diff" and so on. Parts of LAMMPS
-interface with or use Python version 3.6 or later.
-
-The LAMMPS developers aim to keep LAMMPS very portable and usable -
-at least in parts - on most operating systems commonly used for
-running MD simulations.  Please see the :doc:`section on portablility
-<Intro_portability>` for more details.
-
 .. toctree::
    :maxdepth: 1
 

doc/src/Build_basics.rst

@@ -160,7 +160,7 @@ with the OpenMP 3.1 semantics used in LAMMPS for maximal compatibility
 with compiler versions in use.  If compilation with OpenMP enabled fails
 because of your compiler requiring strict OpenMP 4.0 semantics, you can
 change the behavior by adding ``-D LAMMPS_OMP_COMPAT=4`` to the
-``LMP_INC`` variable in your makefile, or add it to the command-line flags
+``LMP_INC`` variable in your makefile, or add it to the command line
 while configuring with CMake.  LAMMPS will auto-detect a suitable setting
 for most GNU, Clang, and Intel compilers.
 
@@ -196,18 +196,13 @@ LAMMPS.
 
    .. tab:: CMake build
 
-      By default CMake will use the compiler it finds according to its
+      By default CMake will use the compiler it finds according to
       internal preferences, and it will add optimization flags
       appropriate to that compiler and any :doc:`accelerator packages
       <Speed_packages>` you have included in the build.  CMake will
       check if the detected or selected compiler is compatible with the
       C++ support requirements of LAMMPS and stop with an error, if this
-      is not the case.  A C++11 compatible compiler is currently
-      required, but a transition to require C++17 is in progress and
-      planned to be completed in Summer 2025. Currently, setting
-      ``-DLAMMPS_CXX11=yes`` is required when configuring with CMake while
-      using a C++11 compatible compiler that does not support C++17,
-      otherwise setting ``-DCMAKE_CXX_STANDARD=17`` is preferred.
+      is not the case.
 
       You can tell CMake to look for a specific compiler with setting
       CMake variables (listed below) during configuration.  For a few
@@ -228,8 +223,6 @@ LAMMPS.
          -D CMAKE_C_COMPILER=name              # name of C compiler
          -D CMAKE_Fortran_COMPILER=name        # name of Fortran compiler
 
-         -D CMAKE_CXX_STANDARD=17              # put compiler in C++17 mode
-         -D LAMMPS_CXX11=yes                   # enforce compilation in C++11 mode
          -D CMAKE_CXX_FLAGS=string             # flags to use with C++ compiler
          -D CMAKE_C_FLAGS=string               # flags to use with C compiler
          -D CMAKE_Fortran_FLAGS=string         # flags to use with Fortran compiler
@@ -328,23 +321,15 @@ LAMMPS.
          you would have to install a newer compiler that supports C++11;
          either as a binary package or through compiling from source.
 
-      While a C++11 compatible compiler is currently sufficient to compile
-      LAMMPS, a transition to require C++17 is in progress and planned to
-      be completed in Summer 2025. Currently, setting ``-DLAMMPS_CXX11``
-      in the ``LMP_INC =`` line in the machine makefile is required when
-      using a C++11 compatible compiler that does not support C++17.
-      Otherwise, to enable C++17 support (if not enabled by default) using
-      a compiler flag like ``-std=c++17`` in CCFLAGS may needed.
-
-      If you build LAMMPS with any :doc:`Speed_packages` included,
-      there may be specific compiler or linker flags that are either
-      required or recommended to enable required features and to
-      achieve optimal performance.  You need to include these in the
-      ``CCFLAGS`` and ``LINKFLAGS`` settings above.  For details, see the
-      documentation for the individual packages listed on the
-      :doc:`Speed_packages` page.  Or examine these files in the
-      ``src/MAKE/OPTIONS`` directory.  They correspond to each of the 5
-      accelerator packages and their hardware variants:
+         If you build LAMMPS with any :doc:`Speed_packages` included,
+         there may be specific compiler or linker flags that are either
+         required or recommended to enable required features and to
+         achieve optimal performance.  You need to include these in the
+         ``CCFLAGS`` and ``LINKFLAGS`` settings above.  For details, see the
+         documentation for the individual packages listed on the
+         :doc:`Speed_packages` page.  Or examine these files in the
+         ``src/MAKE/OPTIONS`` directory.  They correspond to each of the 5
+         accelerator packages and their hardware variants:
 
          .. code-block:: bash
 

doc/src/Build_cmake.rst

@@ -8,7 +8,7 @@ packages.  Links to those pages on the :doc:`Build overview <Build>`
 page.
 
 The following text assumes some familiarity with CMake and focuses on
-using the command-line tool ``cmake`` and what settings are supported
+using the command line tool ``cmake`` and what settings are supported
 for building LAMMPS.  A more detailed tutorial on how to use CMake
 itself, the text mode or graphical user interface, to change the
 generated output files for different build tools and development
@@ -16,7 +16,7 @@ environments is on a :doc:`separate page <Howto_cmake>`.
 
 .. note::
 
-   LAMMPS currently requires that CMake version 3.20 or later is available.
+   LAMMPS currently requires that CMake version 3.16 or later is available.
 
 .. warning::
 
@@ -32,29 +32,29 @@ environments is on a :doc:`separate page <Howto_cmake>`.
 Advantages of using CMake
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 
-CMake is the preferred way of compiling LAMMPS in contrast to the legacy
-build system based on GNU make and through :doc:`(manually customized)
-makefiles <Build_make>`.  Using CMake has multiple advantages that are
-specifically helpful for people with limited experience in compiling
-software or for people that want to modify or extend LAMMPS.
+CMake is an alternative to compiling LAMMPS in the traditional way
+through :doc:`(manually customized) makefiles <Build_make>`.  Using
+CMake has multiple advantages that are specifically helpful for
+people with limited experience in compiling software or for people
+that want to modify or extend LAMMPS.
 
 - CMake can detect available hardware, tools, features, and libraries
   and adapt the LAMMPS default build configuration accordingly.
 - CMake can generate files for different build tools and integrated
   development environments (IDE).
-- CMake supports customization of settings with a command-line, text
+- CMake supports customization of settings with a command line, text
   mode, or graphical user interface.  No manual editing of files,
-  knowledge of file formats or complex command-line syntax is required.
+  knowledge of file formats or complex command line syntax is required.
 - All enabled components are compiled in a single build operation.
 - Automated dependency tracking for all files and configuration options.
-- Support for true out-of-source compilation.  Multiple configurations
+- Support for true out-of-source compilation. Multiple configurations
   and settings with different choices of LAMMPS packages, settings, or
   compilers can be configured and built concurrently from the same
   source tree.
 - Simplified packaging of LAMMPS for Linux distributions, environment
-  modules, or automated build tools like `Spack <https://spack.io>`_
-  or `Homebrew <https://brew.sh/>`_.
-- Integration of automated unit and regression testing.
+  modules, or automated build tools like `Homebrew <https://brew.sh/>`_.
+- Integration of automated unit and regression testing (the LAMMPS side
+  of this is still under active development).
 
 .. _cmake_build:
 
@@ -68,7 +68,7 @@ that purpose you can use either the command-line utility ``cmake`` (or
 graphical utility ``cmake-gui``, or use them interchangeably.  The
 second step is then the compilation and linking of all objects,
 libraries, and executables using the selected build tool.  Here is a
-minimal example using the command-line version of CMake to build LAMMPS
+minimal example using the command line version of CMake to build LAMMPS
 with no add-on packages enabled and no customization:
 
 .. code-block:: bash
@@ -119,13 +119,6 @@ configured) and additional files like LAMMPS API headers, manpages,
 potential and force field files.  The location of the installation tree
 defaults to ``${HOME}/.local``.
 
-.. note::
-
-   If you have set `-D CMAKE_INSTALL_PREFIX` to install LAMMPS into a
-   system location on a Linux machine , you may also have to run (as
-   root) the `ldconfig` program to update the cache file for fast lookup
-   of system shared libraries.
-
 .. _cmake_options:
 
 Configuration and build options
@@ -138,7 +131,7 @@ file called ``CMakeLists.txt`` (for LAMMPS it is located in the
 configuration step.  The cache file contains all current CMake settings.
 
 To modify settings, enable or disable features, you need to set
-*variables* with either the ``-D`` command-line flag (``-D
+*variables* with either the ``-D`` command line flag (``-D
 VARIABLE1_NAME=value``) or change them in the text mode of the graphical
 user interface.  The ``-D`` flag can be used several times in one command.
 
@@ -148,11 +141,11 @@ a different compiler tool chain.  Those are loaded with the ``-C`` flag
 (``-C ../cmake/presets/basic.cmake``).  This step would only be needed
 once, as the settings from the preset files are stored in the
 ``CMakeCache.txt`` file. It is also possible to customize the build
-by adding one or more ``-D`` flags to the CMake command.
+by adding one or more ``-D`` flags to the CMake command line.
 
 Generating files for alternate build tools (e.g. Ninja) and project files
 for IDEs like Eclipse, CodeBlocks, or Kate can be selected using the ``-G``
-command-line flag.  A list of available generator settings for your
+command line flag.  A list of available generator settings for your
 specific CMake version is given when running ``cmake --help``.
 
 .. _cmake_multiconfig:

doc/src/Build_development.rst

@@ -138,27 +138,12 @@ during development:
 The status of this automated testing can be viewed on `https://ci.lammps.org
 <https://ci.lammps.org>`_.
 
-The scripts and inputs for integration, run, and legacy regression
-testing are maintained in a `separate repository
-<https://github.com/lammps/lammps-testing>`_ of the LAMMPS project on
-GitHub.  A few tests are also run as GitHub Actions and their
-configuration files are in the ``.github/workflows/`` folder of the
-LAMMPS git tree.
-
-Regression tests can also be performed locally with the :ref:`regression
-tester tool <regression>`.  The tool checks if a given LAMMPS binary run
-with selected input examples produces thermo output that is consistent
-with the provided log files.  The script can be run in one pass over all
-available input files, but it can also first create multiple lists of
-inputs or folders that can then be run with multiple workers
-concurrently to speed things up.  Another mode allows to do a quick
-check of inputs that contain commands that have changes in the current
-checkout branch relative to a git branch.  This works similar to the two
-pass mode, but will select only shorter runs and no more than 100 inputs
-that are chosen randomly.  This ensures that this test runs
-significantly faster compared to the full test run.  These test runs can
-also be performed with instrumented LAMMPS binaries (see previous
-section).
+The scripts and inputs for integration, run, and regression testing
+are maintained in a
+`separate repository <https://github.com/lammps/lammps-testing>`_
+of the LAMMPS project on GitHub.  A few tests are also run as GitHub
+Actions and their configuration files are in the ``.github/workflows/``
+folder of the LAMMPS git tree.
 
 The unit testing facility is integrated into the CMake build process of
 the LAMMPS source code distribution itself.  It can be enabled by
@@ -263,9 +248,9 @@ will be skipped if prerequisite features are not available in LAMMPS.
    time.  Preference is given to parts of the code base that are easy to
    test or commonly used.
 
-Tests as shown by the ``ctest`` program are commands defined in the
+Tests as shown by the ``ctest`` program are command lines defined in the
 ``CMakeLists.txt`` files in the ``unittest`` directory tree.  A few
-tests simply execute LAMMPS with specific command-line flags and check
+tests simply execute LAMMPS with specific command line flags and check
 the output to the screen for expected content.  A large number of unit
 tests are special tests programs using the `GoogleTest framework
 <https://github.com/google/googletest/>`_ and linked to the LAMMPS
@@ -420,7 +405,7 @@ during MD timestepping and manipulate per-atom properties like
 positions, velocities, and forces.  For those fix styles, testing can be
 done in a very similar fashion as for force fields and thus there is a
 test program `test_fix_timestep` that shares a lot of code, properties,
-and command-line flags with the force field style testers described in
+and command line flags with the force field style testers described in
 the previous section.
 
 This tester will set up a small molecular system run with verlet run
@@ -642,38 +627,14 @@ The following target are available for both, GNU make and CMake:
 
 .. _gh-cli:
 
-GitHub command-line interface
+GitHub command line interface
 -----------------------------
 
-GitHub has developed a `command-line tool <https://cli.github.com>`_
-to interact with the GitHub website via a command called ``gh``.
-This is extremely convenient when working with a Git repository hosted
-on GitHub (like LAMMPS).  It is thus highly recommended to install it
-when doing LAMMPS development.  To use ``gh`` you must be within a git
-checkout of a repository and you must obtain an authentication token
-to connect your checkout with a GitHub user.  This is done with the
-command: ``gh auth login`` where you then have to follow the prompts.
-Here are some examples:
+GitHub is developing a `tool for the command line
+<https://cli.github.com>`_ that interacts with the GitHub website via a
+command called ``gh``.  This can be extremely convenient when working
+with a Git repository hosted on GitHub (like LAMMPS).  It is thus highly
+recommended to install it when doing LAMMPS development.
 
-.. list-table::
-   :header-rows: 1
-   :widths: 34 66
-
-   * - Command
-     - Description
-   * - ``gh pr list``
-     - List currently open pull requests
-   * - ``gh pr checks 404``
-     - Shows the status of all checks for pull request #404
-   * - ``gh pr view 404``
-     - Shows the description and recent comments for pull request #404
-   * - ``gh co 404``
-     - Check out the branch from pull request #404; set up for pushing changes
-   * - ``gh issue list``
-     - List currently open issues
-   * - ``gh issue view 430 --comments``
-     - Shows the description and all comments for issue #430
-
-The capabilities of the ``gh`` command are continually expanding, so
-for more details please see the documentation at https://cli.github.com/manual/
-or use ``gh --help`` or ``gh <command> --help`` for embedded help.
+The capabilities of the ``gh`` command is continually expanding, so
+please see the documentation at https://cli.github.com/manual/

doc/src/Build_extras.rst

@@ -7,8 +7,6 @@ in addition to
 .. list-table::
    :align: center
    :header-rows: 1
-   :widths: 50 50
-   :width: 80%
 
    * - CMake build
      - Traditional make
@@ -48,7 +46,6 @@ This is the list of packages that may require additional steps.
    * :ref:`LEPTON <lepton>`
    * :ref:`MACHDYN <machdyn>`
    * :ref:`MDI <mdi>`
-   * :ref:`MISC <misc>`
    * :ref:`ML-HDNNP <ml-hdnnp>`
    * :ref:`ML-IAP <mliap>`
    * :ref:`ML-PACE <ml-pace>`
@@ -118,7 +115,7 @@ GPU package
 
 To build with this package, you must choose options for precision and
 which GPU hardware to build for. The GPU package currently supports
-three different types of back ends: OpenCL, CUDA and HIP.
+three different types of backends: OpenCL, CUDA and HIP.
 
 CMake build
 ^^^^^^^^^^^
@@ -208,9 +205,9 @@ necessary for ``hipcc`` and the linker to work correctly.
 .. versionadded:: 3Aug2022
 
 Using the CHIP-SPV implementation of HIP is supported. It allows one to
-run HIP code on Intel GPUs via the OpenCL or Level Zero back ends. To use
+run HIP code on Intel GPUs via the OpenCL or Level Zero backends. To use
 CHIP-SPV, you must set ``-DHIP_USE_DEVICE_SORT=OFF`` in your CMake
-command-line as CHIP-SPV does not yet support hipCUB. As of Summer 2022,
+command line as CHIP-SPV does not yet support hipCUB. As of Summer 2022,
 the use of HIP for Intel GPUs is experimental. You should only use this
 option in preparations to run on Aurora system at Argonne.
 
@@ -233,7 +230,7 @@ option in preparations to run on Aurora system at Argonne.
 
 .. code:: bash
 
-   # CUDA target (not recommended, use GPU_API=cuda)
+   # CUDA target (not recommended, use GPU_ARCH=cuda)
    # !!! DO NOT set CMAKE_CXX_COMPILER !!!
    export HIP_PLATFORM=nvcc
    export HIP_PATH=/path/to/HIP/install
@@ -255,10 +252,11 @@ Traditional make
 
 Before building LAMMPS, you must build the GPU library in ``lib/gpu``\ .
 You can do this manually if you prefer; follow the instructions in
-``lib/gpu/README``.  Note that the GPU library uses MPI calls, so you
-must use the same MPI library (or the STUBS library) settings as the
-main LAMMPS code.  This also applies to the ``-DLAMMPS_BIGBIG`` or
-``-DLAMMPS_SMALLBIG`` settings in whichever Makefile you use.
+``lib/gpu/README``.  Note that the GPU library uses MPI calls, so you must
+use the same MPI library (or the STUBS library) settings as the main
+LAMMPS code.  This also applies to the ``-DLAMMPS_BIGBIG``\ ,
+``-DLAMMPS_SMALLBIG``\ , or ``-DLAMMPS_SMALLSMALL`` settings in whichever
+Makefile you use.
 
 You can also build the library in one step from the ``lammps/src`` dir,
 using a command like these, which simply invokes the ``lib/gpu/Install.py``
@@ -421,10 +419,9 @@ minutes to hours) to build.  Of course you only need to do that once.)
       cmake build system.  The ``lib/kim/Install.py`` script supports a
       ``CMAKE`` environment variable if the cmake executable is named other
       than ``cmake`` on your system.  Additional environment variables may be
-      set with the ``make`` command for use by cmake.  For example, to use the
-      ``cmake3`` executable and tell it to use the GNU version 11 compilers
-      called ``g++-11``, ``gcc-11`` and ``gfortran-11`` to build KIM, one
-      could use the following command.
+      provided on the command line for use by cmake.  For example, to use the
+      ``cmake3`` executable and tell it to use the gnu version 11 compilers
+      to build KIM, one could use the following command line.
 
       .. code-block:: bash
 
@@ -547,7 +544,16 @@ They must be specified in uppercase.
       - Local machine
    *  - AMDAVX
       - HOST
-      - AMD chip
+      - AMD 64-bit x86 CPU (AVX 1)
+   *  - ZEN
+      - HOST
+      - AMD Zen class CPU (AVX 2)
+   *  - ZEN2
+      - HOST
+      - AMD Zen2 class CPU (AVX 2)
+   *  - ZEN3
+      - HOST
+      - AMD Zen3 class CPU (AVX 2)
    *  - ARMV80
       - HOST
       - ARMv8.0 Compatible CPU
@@ -563,129 +569,105 @@ They must be specified in uppercase.
    *  - A64FX
       - HOST
       - ARMv8.2 with SVE Support
-   *  - ARMV9_GRACE
-      - HOST
-      - ARMv9 NVIDIA Grace CPU
    *  - SNB
       - HOST
-      - Intel Sandy/Ivy Bridge CPUs
+      - Intel Sandy/Ivy Bridge CPU (AVX 1)
    *  - HSW
       - HOST
-      - Intel Haswell CPUs
+      - Intel Haswell CPU (AVX 2)
    *  - BDW
       - HOST
-      - Intel Broadwell Xeon E-class CPUs
-   *  - ICL
-      - HOST
-      - Intel Ice Lake Client CPUs (AVX512)
-   *  - ICX
-      - HOST
-      - Intel Ice Lake Xeon Server CPUs (AVX512)
+      - Intel Broadwell Xeon E-class CPU (AVX 2 + transactional mem)
    *  - SKL
       - HOST
-      - Intel Skylake Client CPUs
+      - Intel Skylake Client CPU
    *  - SKX
       - HOST
-      - Intel Skylake Xeon Server CPUs (AVX512)
+      - Intel Skylake Xeon Server CPU (AVX512)
+   *  - ICL
+      - HOST
+      - Intel Ice Lake Client CPU (AVX512)
+   *  - ICX
+      - HOST
+      - Intel Ice Lake Xeon Server CPU (AVX512)
+   *  - SPR
+      - HOST
+      - Intel Sapphire Rapids Xeon Server CPU (AVX512)
    *  - KNC
       - HOST
       - Intel Knights Corner Xeon Phi
    *  - KNL
       - HOST
       - Intel Knights Landing Xeon Phi
-   *  - SPR
-      - HOST
-      - Intel Sapphire Rapids Xeon Server CPUs (AVX512)
    *  - POWER8
       - HOST
-      - IBM POWER8 CPUs
+      - IBM POWER8 CPU
    *  - POWER9
       - HOST
-      - IBM POWER9 CPUs
-   *  - ZEN
-      - HOST
-      - AMD Zen architecture
-   *  - ZEN2
-      - HOST
-      - AMD Zen2 architecture
-   *  - ZEN3
-      - HOST
-      - AMD Zen3 architecture
-   *  - ZEN4
-      - HOST
-      - AMD Zen4 architecture
+      - IBM POWER9 CPU
    *  - RISCV_SG2042
       - HOST
-      - SG2042 (RISC-V) CPUs
-   *  - RISCV_RVA22V
-      - HOST
-      - RVA22V (RISC-V) CPUs
+      - SG2042 (RISC-V) CPU
    *  - KEPLER30
       - GPU
-      - NVIDIA Kepler generation CC 3.0
+      - NVIDIA Kepler generation CC 3.0 GPU
    *  - KEPLER32
       - GPU
-      - NVIDIA Kepler generation CC 3.2
+      - NVIDIA Kepler generation CC 3.2 GPU
    *  - KEPLER35
       - GPU
-      - NVIDIA Kepler generation CC 3.5
+      - NVIDIA Kepler generation CC 3.5 GPU
    *  - KEPLER37
       - GPU
-      - NVIDIA Kepler generation CC 3.7
+      - NVIDIA Kepler generation CC 3.7 GPU
    *  - MAXWELL50
       - GPU
-      - NVIDIA Maxwell generation CC 5.0
+      - NVIDIA Maxwell generation CC 5.0 GPU
    *  - MAXWELL52
       - GPU
-      - NVIDIA Maxwell generation CC 5.2
+      - NVIDIA Maxwell generation CC 5.2 GPU
    *  - MAXWELL53
       - GPU
-      - NVIDIA Maxwell generation CC 5.3
+      - NVIDIA Maxwell generation CC 5.3 GPU
    *  - PASCAL60
       - GPU
-      - NVIDIA Pascal generation CC 6.0
+      - NVIDIA Pascal generation CC 6.0 GPU
    *  - PASCAL61
       - GPU
-      - NVIDIA Pascal generation CC 6.1
+      - NVIDIA Pascal generation CC 6.1 GPU
    *  - VOLTA70
       - GPU
-      - NVIDIA Volta generation CC 7.0
+      - NVIDIA Volta generation CC 7.0 GPU
    *  - VOLTA72
       - GPU
-      - NVIDIA Volta generation CC 7.2
+      - NVIDIA Volta generation CC 7.2 GPU
    *  - TURING75
       - GPU
-      - NVIDIA Turing generation CC 7.5
+      - NVIDIA Turing generation CC 7.5 GPU
    *  - AMPERE80
       - GPU
-      - NVIDIA Ampere generation CC 8.0
+      - NVIDIA Ampere generation CC 8.0 GPU
    *  - AMPERE86
       - GPU
-      - NVIDIA Ampere generation CC 8.6
+      - NVIDIA Ampere generation CC 8.6 GPU
    *  - ADA89
       - GPU
-      - NVIDIA Ada generation CC 8.9
+      - NVIDIA Ada Lovelace generation CC 8.9 GPU
    *  - HOPPER90
       - GPU
-      - NVIDIA Hopper generation CC 9.0
+      - NVIDIA Hopper generation CC 9.0 GPU
    *  - AMD_GFX906
       - GPU
-      - AMD GPU MI50/60
+      - AMD GPU MI50/MI60
    *  - AMD_GFX908
       - GPU
       - AMD GPU MI100
    *  - AMD_GFX90A
       - GPU
       - AMD GPU MI200
-   *  - AMD_GFX940
-      - GPU
-      - AMD GPU MI300
    *  - AMD_GFX942
       - GPU
       - AMD GPU MI300
-   *  - AMD_GFX942_APU
-      - GPU
-      - AMD APU MI300A
    *  - AMD_GFX1030
       - GPU
       - AMD GPU V620/W6800
@@ -694,7 +676,7 @@ They must be specified in uppercase.
       - AMD GPU RX7900XTX
    *  - AMD_GFX1103
       - GPU
-      - AMD APU Phoenix
+      - AMD Phoenix APU with Radeon 740M/760M/780M/880M/890M
    *  - INTEL_GEN
       - GPU
       - SPIR64-based devices, e.g. Intel GPUs, using JIT
@@ -717,7 +699,7 @@ They must be specified in uppercase.
       - GPU
       - Intel GPU Ponte Vecchio
 
-This list was last updated for version 4.6.0 of the Kokkos library.
+This list was last updated for version 4.3.0 of the Kokkos library.
 
 .. tabs::
 
@@ -769,27 +751,14 @@ This list was last updated for version 4.6.0 of the Kokkos library.
       platform-appropriate vendor library: rocFFT on AMD GPUs or cuFFT on
       NVIDIA GPUs.
 
-      For Intel GPUs using SYCL, set these variables:
-
-      .. code-block:: bash
-
-         -D Kokkos_ARCH_HOSTARCH=yes   # HOSTARCH = HOST from list above
-         -D Kokkos_ARCH_GPUARCH=yes    # GPUARCH = GPU from list above
-         -D Kokkos_ENABLE_SYCL=yes
-         -D Kokkos_ENABLE_OPENMP=yes
-         -D FFT_KOKKOS=MKL_GPU
-
-      This will enable FFTs on the GPU using the oneMKL library.
-
-      To simplify compilation, six preset files are included in the
+      To simplify compilation, five preset files are included in the
       ``cmake/presets`` folder, ``kokkos-serial.cmake``,
       ``kokkos-openmp.cmake``, ``kokkos-cuda.cmake``,
-      ``kokkos-hip.cmake``, ``kokkos-sycl-nvidia.cmake``, and
-      ``kokkos-sycl-intel.cmake``.  They will enable the KOKKOS
-      package and enable some hardware choices.  For GPU support those
-      preset files must be customized to match the hardware used. So
-      to compile with CUDA device parallelization with some common
-      packages enabled, you can do the following:
+      ``kokkos-hip.cmake``, and ``kokkos-sycl.cmake``.  They will enable
+      the KOKKOS package and enable some hardware choices.  For GPU
+      support those preset files must be customized to match the
+      hardware used. So to compile with CUDA device parallelization with
+      some common packages enabled, you can do the following:
 
       .. code-block:: bash
 
@@ -861,18 +830,6 @@ This list was last updated for version 4.6.0 of the Kokkos library.
          FFT_INC = -DFFT_HIPFFT          # enable use of hipFFT (optional)
          FFT_LIB = -lhipfft              # link to hipFFT library
 
-      For Intel GPUs using SYCL:
-
-      .. code-block:: make
-
-         KOKKOS_DEVICES = SYCL
-         KOKKOS_ARCH = HOSTARCH,GPUARCH  # HOSTARCH = HOST from list above that is
-                                         #            hosting the GPU
-                                         # GPUARCH = GPU from list above
-         FFT_INC = -DFFT_KOKKOS_MKL_GPU  # enable use of oneMKL for Intel GPUs (optional)
-                                         # link to oneMKL FFT library
-         FFT_LIB = -lmkl_sycl_dft -lmkl_intel_ilp64 -lmkl_tbb_thread -mkl_core -ltbb
-
 Advanced KOKKOS compilation settings
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -1141,10 +1098,11 @@ POEMS package
 PYTHON package
 ---------------------------
 
-Building with the PYTHON package requires you have a the Python
-development headers and library available on your system, which
-needs to be Python version 3.6 or later.  See ``lib/python/README``
-for additional details.
+Building with the PYTHON package requires you have a the Python development
+headers and library available on your system, which needs to be a Python 2.7
+version or a Python 3.x version.  Since support for Python 2.x has ended,
+using Python 3.x is strongly recommended. See ``lib/python/README`` for
+additional details.
 
 .. tabs::
 
@@ -1160,7 +1118,7 @@ for additional details.
       set the Python_EXECUTABLE variable to specify which Python
       interpreter should be used.  Note note that you will also need to
       have the development headers installed for this version,
-      e.g. python3-devel.
+      e.g. python2-devel.
 
    .. tab:: Traditional make
 
@@ -2033,7 +1991,7 @@ TBB and MKL.
 .. _mdi:
 
 MDI package
------------
+-----------------------------
 
 .. tabs::
 
@@ -2060,37 +2018,6 @@ MDI package
 
 ----------
 
-.. _misc:
-
-MISC package
-------------
-
-The :doc:`fix imd <fix_imd>` style in this package can be run either
-synchronously (communication with IMD clients is done in the main
-process) or asynchronously (the fix spawns a separate thread that can
-communicate with IMD clients concurrently to the LAMMPS execution).
-
-.. tabs::
-
-   .. tab:: CMake build
-
-      .. code-block:: bash
-
-         -D LAMMPS_ASYNC_IMD=value  # Run IMD server asynchronously
-                                    # value = no (default) or yes
-
-   .. tab:: Traditional make
-
-      To enable asynchronous mode the ``-DLAMMPS_ASYNC_IMD`` define
-      needs to be added to the ``LMP_INC`` variable in the
-      ``Makefile.machine`` you are using.  For example:
-
-      .. code-block:: make
-
-         LMP_INC = -DLAMMPS_ASYNC_IMD -DLAMMPS_MEMALIGN=64
-
-----------
-
 .. _molfile:
 
 MOLFILE package
@@ -2237,7 +2164,7 @@ verified to work in February 2020 with Quantum Espresso versions 6.3 to
       from the sources in the *lib* folder (including the essential
       libqmmm.a) are not included in the static LAMMPS library and
       (currently) not installed, while their code is included in the
-      shared LAMMPS library.  Thus a typical command to configure
+      shared LAMMPS library.  Thus a typical command line to configure
       building LAMMPS for QMMM would be:
 
       .. code-block:: bash
@@ -2297,38 +2224,28 @@ verified to work in February 2020 with Quantum Espresso versions 6.3 to
 RHEO package
 ------------
 
-This package depends on the BPM package.
+To build with this package you must have the `GNU Scientific Library
+(GSL) <https://www.gnu.org/software/gsl/>` installed in locations that
+are accessible in your environment.  The GSL library should be at least
+version 2.7.
 
 .. tabs::
 
    .. tab:: CMake build
 
+      If CMake cannot find the GSL library or include files, you can set:
+
       .. code-block:: bash
 
-         -D PKG_RHEO=yes               # enable the package itself
-         -D PKG_BPM=yes                # the RHEO package requires BPM
-         -D USE_INTERNAL_LINALG=value  # prefer internal LAPACK if true
-
-      Some features in the RHEO package are dependent on code in the BPM
-      package so the latter one *must* be enabled as well.
-
-      The RHEO package also requires LAPACK (and BLAS) and CMake
-      can identify their locations and pass that info to the RHEO
-      build script.  But on some systems this may cause problems when
-      linking or the dependency is not desired.  By using the setting
-      ``-D USE_INTERNAL_LINALG=yes`` when running the CMake
-      configuration, you will select compiling and linking the bundled
-      linear algebra library and work around the limitations.
+         -D GSL_ROOT_DIR=path    # path to root of GSL installation
 
    .. tab:: Traditional make
 
-      The RHEO package requires LAPACK (and BLAS) which can be either
-      a system provided library or the bundled "linalg" library. This
-      is a subset of LAPACK translated to C++.  For that, one of the
-      provided ``Makefile.lammps.<config>`` files needs to be copied
-      to ``Makefile.lammps`` and edited as needed.  The default file
-      uses the bundled "linalg" library, which can be built by
-      ``make lib-linalg args='-m serial'`` in the ``src`` folder.
+      LAMMPS will try to auto-detect the GSL compiler and linker flags
+      from the corresponding ``pkg-config`` file (``gsl.pc``), otherwise
+      you can edit the file ``lib/rheo/Makefile.lammps``
+      to specify the paths and library names where indicated by comments.
+      This must be done **before** the package is installed.
 
 ----------
 

doc/src/Build_make.rst

@@ -8,10 +8,6 @@ Building LAMMPS with traditional makefiles requires that you have a
 for customizing your LAMMPS build with a number of global compilation
 options and features.
 
-This build system is slowly being phased out and may not support all
-optional features and packages in LAMMPS.  It is recommended to switch
-to the :doc:`CMake based build system <Build_cmake>`.
-
 Requirements
 ^^^^^^^^^^^^
 
@@ -30,9 +26,9 @@ additional tools to be available and functioning.
   * A Bourne shell compatible "Unix" shell program (frequently this is ``bash``)
   * A few shell utilities: ``ls``, ``mv``, ``ln``, ``rm``, ``grep``, ``sed``, ``tr``, ``cat``, ``touch``, ``diff``, ``dirname``
   * Python (optional, required for ``make lib-<pkg>`` in the ``src``
-    folder).  Python scripts are currently tested with 3.6 to 3.11.
-    The procedure for :doc:`building the documentation <Build_manual>`
-    *requires* Python 3.8 or later.
+    folder).  Python scripts are currently tested with python 2.7 and
+    3.6 to 3.11. The procedure for :doc:`building the documentation
+    <Build_manual>` *requires* Python 3.5 or later.
 
 Getting started
 ^^^^^^^^^^^^^^^

doc/src/Build_manual.rst

@@ -78,7 +78,8 @@ folder.  The following ``make`` commands are available:
    make epub          # generate LAMMPS.epub in ePUB format using Sphinx
    make mobi          # generate LAMMPS.mobi in MOBI format using ebook-convert
 
-   make fasthtml      # generate approximate HTML in fasthtml dir using pandoc
+   make fasthtml      # generate approximate HTML in fasthtml dir using Sphinx
+                      # some Sphinx extensions do not work correctly with this
 
    make clean         # remove intermediate RST files created by HTML build
    make clean-all     # remove entire build folder and any cached data
@@ -115,9 +116,9 @@ environment variable.
 Prerequisites for HTML
 ----------------------
 
-To run the HTML documentation build toolchain, Python 3.8 or later, git,
-doxygen, and virtualenv have to be installed locally.  Here are
-instructions for common setups:
+To run the HTML documentation build toolchain, python 3, git, doxygen,
+and virtualenv have to be installed locally.  Here are instructions for
+common setups:
 
 .. tabs::
 
@@ -127,7 +128,13 @@ instructions for common setups:
 
          sudo apt-get install git doxygen
 
-   .. tab:: Fedora or RHEL/AlmaLinux/RockyLinux (8.x or later)
+   .. tab:: RHEL or CentOS (Version 7.x)
+
+      .. code-block:: bash
+
+         sudo yum install git doxygen
+
+   .. tab:: Fedora or RHEL/CentOS (8.x or later)
 
       .. code-block:: bash
 
@@ -147,36 +154,7 @@ Prerequisites for PDF
 
 In addition to the tools needed for building the HTML format manual,
 a working LaTeX installation with support for PDFLaTeX and a selection
-of LaTeX styles/packages are required.  Apart from LaTeX packages that
-are usually installed by default, the following packages are required:
-
-.. table_from_list::
-   :columns: 11
-
-   - amsmath
-   - anysize
-   - babel
-   - capt-of
-   - cmap
-   - dvipng
-   - ellipse
-   - fncychap
-   - fontawesome
-   - framed
-   - geometry
-   - gyre
-   - hyperref
-   - hypcap
-   - needspace
-   - pict2e
-   - times
-   - tabulary
-   - titlesec
-   - upquote
-   - wrapfig
-   - xindy
-
-To run the PDFLaTeX translation
+of LaTeX styles/packages are required.  To run the PDFLaTeX translation
 the ``latexmk`` script needs to be installed as well.
 
 Prerequisites for ePUB and MOBI
@@ -204,42 +182,12 @@ documentation is required and either existing files in the ``src``
 folder need to be updated or new files added. These files are written in
 `reStructuredText <rst_>`_ markup for translation with the Sphinx tool.
 
-Testing your contribution
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
 Before contributing any documentation, please check that both the HTML
-and the PDF format documentation can translate without errors and that
-there are no spelling issues.  This is done with ``make html``, ``make pdf``,
-and ``make spelling``, respectively.
-
-Fast and approximate translation to HTML
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Translating the full manual to HTML or PDF can take a long time.  Thus
-there is a fast and approximate way to translate the reStructuredText to
-HTML as a quick-n-dirty way of checking your manual page.
-
-This translation uses `Pandoc <https://pandoc.org>`_ instead of Sphinx
-and thus all special Sphinx features (cross-references, advanced tables,
-embedding of Python docstrings or doxygen documentation, and so on) will
-not render correctly.  Most embedded math should render correctly.  This
-is a **very fast** way to check the syntax and layout of a documentation
-file translated to HTML while writing or updating it.
-
-To translate **all** manual pages, you can type ``make fasthtml`` at the
-command line.  The translated HTML files are then in the ``fasthtml``
-folder. All subsequent ``make fasthtml`` commands will only translate
-``.rst`` files that have been changed.  The ``make fasthtml`` command
-can be parallelized with make using the `-j` flag.  You can also
-directly translate only individual pages: e.g. to translate only the
-``doc/src/pair_lj.rst`` page type ``make fasthtml/pair_lj.html``
-
-After writing the documentation is completed, you will still need
-to verify with ``make html`` and ``make pdf`` that it translates
-correctly in both formats.
-
-Tests for consistency, completeness, and other known issues
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+and the PDF format documentation can translate without errors.  During
+testing the html translation, you may use the ``make fasthtml`` command
+which does an approximate translation (i.e. not all Sphinx features and
+extensions will work), but runs very fast because it will only translate
+files that have been changed since the last ``make fasthtml`` command.
 
 Please also check the output to the console for any warnings or problems.  There will
 be multiple tests run automatically:

doc/src/Build_package.rst

@@ -49,7 +49,6 @@ packages:
    * :ref:`LEPTON <lepton>`
    * :ref:`MACHDYN <machdyn>`
    * :ref:`MDI <mdi>`
-   * :ref:`MISC <misc>`
    * :ref:`ML-HDNNP <ml-hdnnp>`
    * :ref:`ML-IAP <mliap>`
    * :ref:`ML-PACE <ml-pace>`

doc/src/Build_settings.rst

@@ -8,13 +8,12 @@ Optional build settings
 LAMMPS can be built with several optional settings.  Each subsection
 explains how to do this for building both with CMake and make.
 
-* `C++11 and C++17 standard compliance`_ when building all of LAMMPS
+* `C++11 standard compliance`_ when building all of LAMMPS
 * `FFT library`_ for use with the :doc:`kspace_style pppm <kspace_style>` command
 * `Size of LAMMPS integer types and size limits`_
 * `Read or write compressed files`_
 * `Output of JPEG, PNG, and movie files`_ via the :doc:`dump image <dump_image>` or :doc:`dump movie <dump_image>` commands
-* `Support for downloading files from the input`_
-* `Prevent download of large potential files`_
+* `Support for downloading files`_
 * `Memory allocation alignment`_
 * `Workaround for long long integers`_
 * `Exception handling when using LAMMPS as a library`_ to capture errors
@@ -24,15 +23,14 @@ explains how to do this for building both with CMake and make.
 
 .. _cxx11:
 
-C++11 and C++17 standard compliance
------------------------------------
+C++11 standard compliance
+-------------------------
 
-A C++11 standard compatible compiler is currently the minimum
-requirement for compiling LAMMPS.  LAMMPS version 3 March 2020 is the
-last version compatible with the previous C++98 standard for the core
-code and most packages. Most currently used C++ compilers are compatible
-with C++11, but some older ones may need extra flags to enable C++11
-compliance.  Example for GNU c++ 4.8.x:
+A C++11 standard compatible compiler is a requirement for compiling LAMMPS.
+LAMMPS version 3 March 2020 is the last version compatible with the previous
+C++98 standard for the core code and most packages. Most currently used
+C++ compilers are compatible with C++11, but some older ones may need extra
+flags to enable C++11 compliance.  Example for GNU c++ 4.8.x:
 
 .. code-block:: make
 
@@ -42,17 +40,6 @@ Individual packages may require compliance with a later C++ standard
 like C++14 or C++17.  These requirements will be documented with the
 :doc:`individual packages <Packages_details>`.
 
-.. versionchanged:: 4Feb2025
-
-Starting with LAMMPS version 4 February 2025 we are starting a
-transition to require the C++17 standard.  Most current compilers are
-compatible and if the C++17 standard is available by default, LAMMPS
-will enable C++17 and will compile normally.  If the chosen compiler is
-not compatible with C++17, but only supports C++11, then the define
--DLAMMPS_CXX11 is required to fall back to compiling with a C++11
-compiler.  After the next stable release of LAMMPS in summer 2025, the
-LAMMPS development branch and future releases will require C++17.
-
 ----------
 
 .. _fft:
@@ -80,10 +67,10 @@ libraries and better pipelining for packing and communication.
 
       .. code-block:: bash
 
-         -D FFT=value              # FFTW3 or MKL or NVPL or KISS,
-                                   # default is FFTW3 if found, else KISS
-         -D FFT_KOKKOS=value       # FFTW3 or MKL or NVPL or KISS or CUFFT
-                                   # or HIPFFT or MKL_GPU, default is KISS
+         -D FFT=value              # FFTW3 or MKL or KISS, default is FFTW3 if found,
+                                   # else KISS
+         -D FFT_KOKKOS=value       # FFTW3 or MKL or KISS or CUFFT or HIPFFT,
+                                   # default is KISS
          -D FFT_SINGLE=value       # yes or no (default), no = double precision
          -D FFT_PACK=value         # array (default) or pointer or memcpy
          -D FFT_USE_HEFFTE=value   # yes or no (default), yes links to heFFTe
@@ -116,8 +103,6 @@ libraries and better pipelining for packing and communication.
          -D FFT_HEFFTE_BACKEND=value # FFTW or MKL or empty/undefined for the stock
                                      # heFFTe back end
          -D Heffte_ROOT=path         # path to an existing heFFTe installation
-         -D nvpl_fft_INCLUDE_DIR=path # path to NVPL FFT include files
-         -D nvpl_fft_LIBRARY_DIR=path # path to NVPL FFT libraries
 
       .. note::
 
@@ -136,10 +121,9 @@ libraries and better pipelining for packing and communication.
       .. code-block:: make
 
          FFT_INC = -DFFT_<NAME>        # where <NAME> is KISS (default), FFTW3,
-                                       # FFTW (same as FFTW3), NVPL, or MKL
+                                       # FFTW (same as FFTW3), or MKL
          FFT_INC = -DFFT_KOKKOS_<NAME> # where <NAME> is KISS (default), FFTW3,
-                                       # FFTW (same as FFTW3), NVPL, MKL, CUFFT,
-                                       # HIPFFT, or MKL_GPU
+                                       # FFTW (same as FFTW3), MKL, CUFFT, or HIPFFT
          FFT_INC = -DFFT_SINGLE       # do not specify for double precision
          FFT_INC = -DFFT_FFTW_THREADS # enable using threaded FFTW3 libraries
          FFT_INC = -DFFT_MKL_THREADS  # enable using threaded FFTs with MKL libraries
@@ -157,9 +141,6 @@ libraries and better pipelining for packing and communication.
          # cuFFT either precision
          FFT_LIB =  -lcufft
 
-         # MKL_GPU either precision
-         FFT_LIB = -lmkl_sycl_dft -lmkl_intel_ilp64 -lmkl_tbb_thread -lmkl_core -ltbb
-
          # FFTW3 double precision
          FFT_LIB =  -lfftw3
 
@@ -184,10 +165,6 @@ libraries and better pipelining for packing and communication.
          # MKL with automatic runtime selection of interface libs
          FFT_LIB =  -lmkl_rt
 
-         # threaded NVPL FFT
-         FFT_LIB =  -lnvpl_fftw
-
-
       As with CMake, you do not need to set paths in ``FFT_INC`` or
       ``FFT_PATH``, if the compiler can find the FFT header and library
       files in its default search path.  You must specify ``FFT_LIB``
@@ -241,15 +218,10 @@ The Intel MKL math library is part of the Intel compiler suite.  It
 can be used with the Intel or GNU compiler (see the ``FFT_LIB`` setting
 above).
 
-The NVIDIA Performance Libraries (NVPL) FFT library is optimized for NVIDIA
-Grace Armv9.0 architecture. You can download it from https://docs.nvidia.com/nvpl/
-
 The cuFFT and hipFFT FFT libraries are packaged with NVIDIA's CUDA and
 AMD's HIP installations, respectively. These FFT libraries require the
 Kokkos acceleration package to be enabled and the Kokkos back end to be
-GPU-resident (i.e., HIP or CUDA). Similarly, GPU offload of FFTs on
-Intel GPUs with oneMKL currently requires the Kokkos acceleration
-package to be enabled with the SYCL back end.
+GPU-resident (i.e., HIP or CUDA).
 
 Performing 3d FFTs in parallel can be time-consuming due to data access
 and required communication.  This cost can be reduced by performing
@@ -316,7 +288,7 @@ large counters can become before "rolling over".  The default setting of
 
       .. code-block:: bash
 
-         -D LAMMPS_SIZES=value   # smallbig (default) or bigbig
+         -D LAMMPS_SIZES=value   # smallbig (default) or bigbig or smallsmall
 
       If the variable is not set explicitly, "smallbig" is used.
 
@@ -327,7 +299,7 @@ large counters can become before "rolling over".  The default setting of
 
       .. code-block:: make
 
-         LMP_INC = -DLAMMPS_SMALLBIG    # or -DLAMMPS_BIGBIG
+         LMP_INC = -DLAMMPS_SMALLBIG    # or -DLAMMPS_BIGBIG or -DLAMMPS_SMALLSMALL
 
       The default setting is ``-DLAMMPS_SMALLBIG`` if nothing is specified
 
@@ -336,27 +308,34 @@ LAMMPS system size restrictions
 
 .. list-table::
    :header-rows: 1
-   :widths: 27 36 37
+   :widths: 18 27 28 27
    :align: center
 
    * -
      - smallbig
      - bigbig
+     - smallsmall
    * - Total atom count
      - :math:`2^{63}` atoms (= :math:`9.223 \cdot 10^{18}`)
      - :math:`2^{63}` atoms (= :math:`9.223 \cdot 10^{18}`)
+     - :math:`2^{31}` atoms (= :math:`2.147 \cdot 10^9`)
    * - Total timesteps
      - :math:`2^{63}` steps (= :math:`9.223 \cdot 10^{18}`)
      - :math:`2^{63}` steps (= :math:`9.223 \cdot 10^{18}`)
+     - :math:`2^{31}` steps (= :math:`2.147 \cdot 10^9`)
    * - Atom ID values
      - :math:`1 \le i \le 2^{31} (= 2.147 \cdot 10^9)`
      - :math:`1 \le i \le 2^{63} (= 9.223 \cdot 10^{18})`
+     - :math:`1 \le i \le 2^{31} (= 2.147 \cdot 10^9)`
    * - Image flag values
      - :math:`-512 \le i \le 511`
      - :math:`- 1\,048\,576 \le i \le 1\,048\,575`
+     - :math:`-512 \le i \le 511`
 
 The "bigbig" setting increases the size of image flags and atom IDs over
-the default "smallbig" setting.
+"smallbig" and the "smallsmall" setting is only needed if your machine
+does not support 64-bit integers or incurs performance penalties when
+using them.
 
 These are limits for the core of the LAMMPS code, specific features or
 some styles may impose additional limits.  The :ref:`ATC
@@ -510,8 +489,8 @@ during a run.
 
 .. _libcurl:
 
-Support for downloading files from the input
---------------------------------------------
+Support for downloading files
+-----------------------------
 
 .. versionadded:: 29Aug2024
 
@@ -554,25 +533,6 @@ LAMMPS is compiled accordingly which needs the following settings:
 
 ----------
 
-.. _download_pot:
-
-Prevent download of large potential files
------------------------------------------
-
-.. versionadded:: 8Feb2023
-
-LAMMPS bundles a selection of potential files in the ``potentials``
-folder as examples of how those kinds of potential files look like and
-for use with the provided input examples in the ``examples`` tree.  To
-keep the size of the distributed LAMMPS source package small, very large
-potential files (> 5 MBytes) are not bundled, but only downloaded on
-demand when the :doc:`corresponding package <Packages_list>` is
-installed.  This automatic download can be prevented when :doc:`building
-LAMMPS with CMake <Build_cmake>` by adding the setting `-D
-DOWNLOAD_POTENTIALS=off` when configuring.
-
-----------
-
 .. _align:
 
 Memory allocation alignment

doc/src/Build_windows.rst

@@ -100,9 +100,9 @@ procedure.
 
 It is possible to use both the integrated CMake support of the Visual
 Studio IDE or use an external CMake installation (e.g. downloaded from
-cmake.org) to create build files and compile LAMMPS from the command-line.
+cmake.org) to create build files and compile LAMMPS from the command line.
 
-Compilation via command-line and unit tests are checked automatically
+Compilation via command line and unit tests are checked automatically
 for the LAMMPS development branch through
 `GitHub Actions <https://github.com/lammps/lammps/actions/workflows/compile-msvc.yml>`_.
 
@@ -115,7 +115,7 @@ for the LAMMPS development branch through
 
 Please note, that for either approach CMake will create a so-called
 :ref:`"multi-configuration" build environment <cmake_multiconfig>`, and
-the commands for building and testing LAMMPS must be adjusted
+the command lines for building and testing LAMMPS must be adjusted
 accordingly.
 
 The LAMMPS cmake folder contains a ``CMakeSettings.json`` file with

doc/src/Classes_lammps.rst

@@ -4,7 +4,7 @@ LAMMPS Class
 The LAMMPS class is encapsulating an MD simulation state and thus it is
 the class that needs to be created when starting a new simulation system
 state.  The LAMMPS executable essentially creates one instance of this
-class and passes the command-line flags and tells it to process the
+class and passes the command line flags and tells it to process the
 provided input (a file or ``stdin``).  It shuts the class down when
 control is returned to it and then exits.  When using LAMMPS as a
 library from another code it is required to create an instance of this

doc/src/Commands_all.rst

@@ -140,7 +140,6 @@ additional letter in parenthesis: k = KOKKOS.
    * :doc:`plugin <plugin>`
    * :doc:`prd <prd>`
    * :doc:`python <python>`
-   * :doc:`region2vmd <region2vmd>`
    * :doc:`tad <tad>`
    * :doc:`temper <temper>`
    * :doc:`temper/grem <temper_grem>`

doc/src/Commands_bond.rst

@@ -23,7 +23,6 @@ OPT.
    *
    * :doc:`bpm/rotational <bond_bpm_rotational>`
    * :doc:`bpm/spring <bond_bpm_spring>`
-   * :doc:`bpm/spring/plastic <bond_bpm_spring_plastic>`
    * :doc:`class2 (ko) <bond_class2>`
    * :doc:`fene (iko) <bond_fene>`
    * :doc:`fene/expand (o) <bond_fene_expand>`
@@ -91,7 +90,6 @@ OPT.
    * :doc:`lepton (o) <angle_lepton>`
    * :doc:`mesocnt <angle_mesocnt>`
    * :doc:`mm3 <angle_mm3>`
-   * :doc:`mwlc <angle_mwlc>`
    * :doc:`quartic (o) <angle_quartic>`
    * :doc:`spica (ko) <angle_spica>`
    * :doc:`table (o) <angle_table>`
@@ -128,7 +126,7 @@ OPT.
    * :doc:`harmonic (iko) <dihedral_harmonic>`
    * :doc:`helix (o) <dihedral_helix>`
    * :doc:`lepton (o) <dihedral_lepton>`
-   * :doc:`multi/harmonic (ko) <dihedral_multi_harmonic>`
+   * :doc:`multi/harmonic (o) <dihedral_multi_harmonic>`
    * :doc:`nharmonic (o) <dihedral_nharmonic>`
    * :doc:`opls (iko) <dihedral_opls>`
    * :doc:`quadratic (o) <dihedral_quadratic>`

doc/src/Commands_compute.rst

@@ -58,7 +58,6 @@ KOKKOS, o = OPENMP, t = OPT.
    * :doc:`fep/ta <compute_fep_ta>`
    * :doc:`force/tally <compute_tally>`
    * :doc:`fragment/atom <compute_cluster_atom>`
-   * :doc:`gaussian/grid/local (k) <compute_gaussian_grid_local>`
    * :doc:`global/atom <compute_global_atom>`
    * :doc:`group/group <compute_group_group>`
    * :doc:`gyration <compute_gyration>`
@@ -141,8 +140,8 @@ KOKKOS, o = OPENMP, t = OPT.
    * :doc:`smd/vol <compute_smd_vol>`
    * :doc:`snap <compute_sna_atom>`
    * :doc:`sna/atom <compute_sna_atom>`
-   * :doc:`sna/grid (k) <compute_sna_atom>`
-   * :doc:`sna/grid/local (k) <compute_sna_atom>`
+   * :doc:`sna/grid <compute_sna_atom>`
+   * :doc:`sna/grid/local <compute_sna_atom>`
    * :doc:`snad/atom <compute_sna_atom>`
    * :doc:`snav/atom <compute_sna_atom>`
    * :doc:`sph/e/atom <compute_sph_e_atom>`
@@ -178,7 +177,6 @@ KOKKOS, o = OPENMP, t = OPT.
    * :doc:`ti <compute_ti>`
    * :doc:`torque/chunk <compute_torque_chunk>`
    * :doc:`vacf <compute_vacf>`
-   * :doc:`vacf/chunk <compute_vacf_chunk>`
    * :doc:`vcm/chunk <compute_vcm_chunk>`
    * :doc:`viscosity/cos <compute_viscosity_cos>`
    * :doc:`voronoi/atom <compute_voronoi_atom>`

doc/src/Commands_dump.rst

@@ -19,7 +19,6 @@ An alphabetic list of all LAMMPS :doc:`dump <dump>` commands.
    * :doc:`custom/gz <dump>`
    * :doc:`custom/zstd <dump>`
    * :doc:`dcd <dump>`
-   * :doc:`extxyz <dump>`
    * :doc:`grid <dump>`
    * :doc:`grid/vtk <dump>`
    * :doc:`h5md <dump_h5md>`

doc/src/Commands_fix.rst

@@ -43,7 +43,7 @@ OPT.
    * :doc:`brownian/asphere <fix_brownian>`
    * :doc:`brownian/sphere <fix_brownian>`
    * :doc:`charge/regulation <fix_charge_regulation>`
-   * :doc:`cmap (k) <fix_cmap>`
+   * :doc:`cmap <fix_cmap>`
    * :doc:`colvars <fix_colvars>`
    * :doc:`controller <fix_controller>`
    * :doc:`damping/cundall <fix_damping_cundall>`
@@ -58,7 +58,6 @@ OPT.
    * :doc:`dt/reset (k) <fix_dt_reset>`
    * :doc:`edpd/source <fix_dpd_source>`
    * :doc:`efield (k) <fix_efield>`
-   * :doc:`efield/lepton <fix_efield_lepton>`
    * :doc:`efield/tip4p <fix_efield>`
    * :doc:`ehex <fix_ehex>`
    * :doc:`electrode/conp (i) <fix_electrode>`
@@ -135,7 +134,7 @@ OPT.
    * :doc:`nve/dot <fix_nve_dot>`
    * :doc:`nve/dotc/langevin <fix_nve_dotc_langevin>`
    * :doc:`nve/eff <fix_nve_eff>`
-   * :doc:`nve/limit (k) <fix_nve_limit>`
+   * :doc:`nve/limit <fix_nve_limit>`
    * :doc:`nve/line <fix_nve_line>`
    * :doc:`nve/manifold/rattle <fix_nve_manifold_rattle>`
    * :doc:`nve/noforce <fix_nve_noforce>`
@@ -162,8 +161,6 @@ OPT.
    * :doc:`phonon <fix_phonon>`
    * :doc:`pimd/langevin <fix_pimd>`
    * :doc:`pimd/nvt <fix_pimd>`
-   * :doc:`pimd/langevin/bosonic <fix_pimd>`
-   * :doc:`pimd/nvt/bosonic <fix_pimd>`
    * :doc:`planeforce <fix_planeforce>`
    * :doc:`plumed <fix_plumed>`
    * :doc:`poems <fix_poems>`
@@ -181,21 +178,18 @@ OPT.
    * :doc:`python/move <fix_python_move>`
    * :doc:`qbmsst <fix_qbmsst>`
    * :doc:`qeq/comb (o) <fix_qeq_comb>`
-   * :doc:`qeq/ctip <fix_qeq>`
    * :doc:`qeq/dynamic <fix_qeq>`
    * :doc:`qeq/fire <fix_qeq>`
    * :doc:`qeq/point <fix_qeq>`
    * :doc:`qeq/reaxff (ko) <fix_qeq_reaxff>`
-   * :doc:`qeq/rel/reaxff <fix_qeq_rel_reaxff>`
    * :doc:`qeq/shielded <fix_qeq>`
    * :doc:`qeq/slater <fix_qeq>`
    * :doc:`qmmm <fix_qmmm>`
    * :doc:`qtb <fix_qtb>`
-   * :doc:`qtpie/reaxff <fix_qtpie_reaxff>`
    * :doc:`rattle <fix_shake>`
    * :doc:`reaxff/bonds (k) <fix_reaxff_bonds>`
    * :doc:`reaxff/species (k) <fix_reaxff_species>`
-   * :doc:`recenter (k) <fix_recenter>`
+   * :doc:`recenter <fix_recenter>`
    * :doc:`restrain <fix_restrain>`
    * :doc:`rheo <fix_rheo>`
    * :doc:`rheo/oxidation <fix_rheo_oxidation>`
@@ -273,7 +267,7 @@ OPT.
    * :doc:`wall/piston <fix_wall_piston>`
    * :doc:`wall/reflect (k) <fix_wall_reflect>`
    * :doc:`wall/reflect/stochastic <fix_wall_reflect_stochastic>`
-   * :doc:`wall/region (k) <fix_wall_region>`
+   * :doc:`wall/region <fix_wall_region>`
    * :doc:`wall/region/ees <fix_wall_ees>`
    * :doc:`wall/srd <fix_wall_srd>`
    * :doc:`wall/table <fix_wall>`

doc/src/Commands_input.rst

@@ -69,7 +69,7 @@ WARNING message is printed.  The :doc:`Errors <Errors>` page gives
 more information on what errors mean.  The documentation for each
 command lists restrictions on how the command can be used.
 
-You can use the :ref:`-skiprun <skiprun>` command-line flag
+You can use the :ref:`-skiprun <skiprun>` command line flag
 to have LAMMPS skip the execution of any ``run``, ``minimize``, or similar
 commands to check the entire input for correct syntax to avoid crashes
 on typos or syntax errors in long runs.

doc/src/Commands_pair.rst

@@ -44,7 +44,7 @@ OPT.
    * :doc:`born/coul/wolf/cs (g) <pair_cs>`
    * :doc:`born/gauss <pair_born_gauss>`
    * :doc:`bpm/spring <pair_bpm_spring>`
-   * :doc:`brownian (ko) <pair_brownian>`
+   * :doc:`brownian (o) <pair_brownian>`
    * :doc:`brownian/poly (o) <pair_brownian>`
    * :doc:`buck (giko) <pair_buck>`
    * :doc:`buck/coul/cut (giko) <pair_buck>`
@@ -59,7 +59,6 @@ OPT.
    * :doc:`comb (o) <pair_comb>`
    * :doc:`comb3 <pair_comb>`
    * :doc:`cosine/squared <pair_cosine_squared>`
-   * :doc:`coul/ctip <pair_coul>`
    * :doc:`coul/cut (gko) <pair_coul>`
    * :doc:`coul/cut/dielectric <pair_dielectric>`
    * :doc:`coul/cut/global (o) <pair_coul>`
@@ -80,7 +79,6 @@ OPT.
    * :doc:`coul/tt <pair_coul_tt>`
    * :doc:`coul/wolf (ko) <pair_coul>`
    * :doc:`coul/wolf/cs <pair_cs>`
-   * :doc:`dispersion/d3 <pair_dispersion_d3>`
    * :doc:`dpd (giko) <pair_dpd>`
    * :doc:`dpd/coul/slater/long (g) <pair_dpd_coul_slater_long>`
    * :doc:`dpd/ext (ko) <pair_dpd_ext>`
@@ -115,9 +113,7 @@ OPT.
    * :doc:`gw/zbl <pair_gw>`
    * :doc:`harmonic/cut (o) <pair_harmonic_cut>`
    * :doc:`hbond/dreiding/lj (o) <pair_hbond_dreiding>`
-   * :doc:`hbond/dreiding/lj/angleoffset (o) <pair_hbond_dreiding>`
    * :doc:`hbond/dreiding/morse (o) <pair_hbond_dreiding>`
-   * :doc:`hbond/dreiding/morse/angleoffset (o) <pair_hbond_dreiding>`
    * :doc:`hdnnp <pair_hdnnp>`
    * :doc:`hippo (g) <pair_amoeba>`
    * :doc:`ilp/graphene/hbn (t) <pair_ilp_graphene_hbn>`

doc/src/Commands_removed.rst

@@ -1,10 +1,6 @@
 Removed commands and packages
 =============================
 
-.. contents:: \
-
-------
-
 This page lists LAMMPS commands and packages that have been removed from
 the distribution and provides suggestions for alternatives or
 replacements.  LAMMPS has special dummy styles implemented, that will
@@ -12,95 +8,29 @@ stop LAMMPS and print a suitable error message in most cases, when a
 style/command is used that has been removed or will replace the command
 with the direct alternative (if available) and print a warning.
 
-LAMMPS shell
-------------
+restart2data tool
+-----------------
 
-.. versionchanged:: 29Aug2024
+.. versionchanged:: 23Nov2013
 
-The LAMMPS shell has been removed from the LAMMPS distribution. Users
-are encouraged to use the :ref:`LAMMPS-GUI <lammps_gui>` tool instead.
+The functionality of the restart2data tool has been folded into the
+LAMMPS executable directly instead of having a separate tool.  A
+combination of the commands :doc:`read_restart <read_restart>` and
+:doc:`write_data <write_data>` can be used to the same effect.  For
+added convenience this conversion can also be triggered by
+:doc:`command line flags <Run_options>`
 
-i-PI tool
----------
+Fix ave/spatial and fix ave/spatial/sphere
+------------------------------------------
 
-.. versionchanged:: 27Jun2024
+.. deprecated:: 11Dec2015
 
-The i-PI tool has been removed from the LAMMPS distribution.  Instead,
-instructions to install i-PI from PyPI via pip are provided.
-
-USER-REAXC package
-------------------
-
-.. deprecated:: 7Feb2024
-
-The USER-REAXC package has been renamed to :ref:`REAXFF <PKG-REAXFF>`.
-In the process also the pair style and related fixes were renamed to use
-the "reaxff" string instead of "reax/c". For a while LAMMPS was maintaining
-backward compatibility by providing aliases for the styles.  These have
-been removed, so using "reaxff" is now *required*.
-
-MPIIO package
--------------
-
-.. deprecated:: 21Nov2023
-
-The MPIIO package has been removed from LAMMPS since it was unmaintained
-for many years and thus not updated to incorporate required changes that
-had been applied to the corresponding non-MPIIO commands. As a
-consequence the MPIIO commands had become unreliable and sometimes
-crashing LAMMPS or corrupting data.  Similar functionality is available
-through the :ref:`ADIOS package <PKG-ADIOS>` and the :ref:`NETCDF
-package <PKG-NETCDF>`.  Also, the :doc:`dump_modify nfile or dump_modify
-fileper <dump_modify>` keywords may be used for an efficient way of
-writing out dump files when running on large numbers of processors.
-Similarly, the "nfile" and "fileper" keywords exist for restarts:
-see :doc:`restart <restart>`, :doc:`read_restart <read_restart>`,
-:doc:`write_restart <write_restart>`.
-
-MSCG package
-------------
-
-.. deprecated:: 21Nov2023
-
-The MSCG package has been removed from LAMMPS since it was unmaintained
-for many years and instead superseded by the `OpenMSCG software
-<https://software.rcc.uchicago.edu/mscg/>`_ of the Voth group at the
-University of Chicago, which can be used independent from LAMMPS.
-
-LATTE package
--------------
-
-.. deprecated:: 15Jun2023
-
-The LATTE package with the fix latte command was removed from LAMMPS.
-This functionality has been superseded by :doc:`fix mdi/qm <fix_mdi_qm>`
-and :doc:`fix mdi/qmmm <fix_mdi_qmmm>` from the :ref:`MDI package
-<PKG-MDI>`.  These fixes are compatible with several quantum software
-packages, including LATTE.  See the ``examples/QUANTUM`` dir and the
-:doc:`MDI coupling HOWTO <Howto_mdi>` page.  MDI supports running LAMMPS
-with LATTE as a plugin library (similar to the way fix latte worked), as
-well as on a different set of MPI processors.
-
-Minimize style fire/old
------------------------
-
-.. deprecated:: 8Feb2023
-
-Minimize style *fire/old* has been removed. Its functionality can be
-reproduced with style *fire* with specific options. Please see the
-:doc:`min_modify command <min_modify>` documentation for details.
-
-Pair style mesont/tpm, compute style mesont, atom style mesont
---------------------------------------------------------------
-
-.. deprecated:: 8Feb2023
-
-Pair style *mesont/tpm*, compute style *mesont*, and atom style
-*mesont* have been removed from the :ref:`MESONT package <PKG-MESONT>`.
-The same functionality is available through
-:doc:`pair style mesocnt <pair_mesocnt>`,
-:doc:`bond style mesocnt <bond_mesocnt>` and
-:doc:`angle style mesocnt <angle_mesocnt>`.
+The fixes ave/spatial and ave/spatial/sphere have been removed from LAMMPS
+since they were superseded by the more general and extensible "chunk
+infrastructure".  Here the system is partitioned in one of many possible
+ways through the :doc:`compute chunk/atom <compute_chunk_atom>` command
+and then averaging is done using :doc:`fix ave/chunk <fix_ave_chunk>`.
+Please refer to the :doc:`chunk HOWTO <Howto_chunk>` section for an overview.
 
 Box command
 -----------
@@ -120,34 +50,23 @@ been folded into the :doc:`reset_atoms <reset_atoms>` command.  If
 present, LAMMPS will replace the commands accordingly and print a
 warning.
 
-MESSAGE package
----------------
+LATTE package
+-------------
 
-.. deprecated:: 4May2022
+.. deprecated:: 15Jun2023
 
-The MESSAGE package has been removed since it was superseded by the
-:ref:`MDI package <PKG-MDI>`. MDI implements the same functionality
-and in a more general way with direct support for more applications.
-
-REAX package
-------------
-
-.. deprecated:: 4Jan2019
-
-The REAX package has been removed since it was superseded by the
-:ref:`REAXFF package <PKG-REAXFF>`.  The REAXFF package has been tested
-to yield equivalent results to the REAX package, offers better
-performance, supports OpenMP multi-threading via OPENMP, and GPU and
-threading parallelization through KOKKOS.  The new pair styles are not
-syntax compatible with the removed reax pair style, so input files will
-have to be adapted.  The REAXFF package was originally called
-USER-REAXC.
+The LATTE package with the fix latte command was removed from LAMMPS.
+This functionality has been superseded by :doc:`fix mdi/qm <fix_mdi_qm>`
+and :doc:`fix mdi/qmmm <fix_mdi_qmmm>` from the :ref:`MDI package
+<PKG-MDI>`.  These fixes are compatible with several quantum software
+packages, including LATTE.  See the ``examples/QUANTUM`` dir and the
+:doc:`MDI coupling HOWTO <Howto_mdi>` page.  MDI supports running LAMMPS
+with LATTE as a plugin library (similar to the way fix latte worked), as
+well as on a different set of MPI processors.
 
 MEAM package
 ------------
 
-.. deprecated:: 4Jan2019
-
 The MEAM package in Fortran has been replaced by a C++ implementation.
 The code in the :ref:`MEAM package <PKG-MEAM>` is a translation of the
 Fortran code of MEAM into C++, which removes several restrictions
@@ -157,11 +76,82 @@ for some optimizations leading to better performance.  The pair style
 period the C++ version of MEAM was called USER-MEAMC so it could
 coexist with the Fortran version.
 
+Minimize style fire/old
+-----------------------
+
+.. deprecated:: 8Feb2023
+
+Minimize style *fire/old* has been removed. Its functionality can be
+reproduced with *fire* with specific options. Please see the
+:doc:`min_modify command <min_modify>` documentation for details.
+
+Pair style mesont/tpm, compute style mesont, atom style mesont
+--------------------------------------------------------------
+
+.. deprecated:: 8Feb2023
+
+Pair style *mesont/tpm*, compute style *mesont*, and atom style
+*mesont* have been removed from the :ref:`MESONT package <PKG-MESONT>`.
+The same functionality is available through
+:doc:`pair style mesocnt <pair_mesocnt>`,
+:doc:`bond style mesocnt <bond_mesocnt>` and
+:doc:`angle style mesocnt <angle_mesocnt>`.
+
+MPIIO package
+-------------
+
+.. deprecated:: 21Nov2023
+
+The MPIIO package has been removed from LAMMPS since it was unmaintained
+for many years and thus not updated to incorporate required changes that
+had been applied to the corresponding non-MPIIO commands. As a
+consequence the MPIIO commands had become unreliable and sometimes
+crashing LAMMPS or corrupting data.  Similar functionality is available
+through the :ref:`ADIOS package <PKG-ADIOS>` and the :ref:`NETCDF
+package <PKG-NETCDF>`.  Also, the :doc:`dump_modify nfile or dump_modify
+fileper <dump_modify>` keywords may be used for an efficient way of
+writing out dump files when running on large numbers of processors.
+Similarly, the "nfile" and "fileper" keywords exist for restarts:
+see :doc:`restart <restart>`, :doc:`read_restart <read_restart>`,
+:doc:`write_restart <write_restart>`.
+
+
+MSCG package
+------------
+
+.. deprecated:: 21Nov2023
+
+The MSCG package has been removed from LAMMPS since it was unmaintained
+for many years and instead superseded by the `OpenMSCG software
+<https://software.rcc.uchicago.edu/mscg/>`_ of the Voth group at the
+University of Chicago, which can be used independent from LAMMPS.
+
+REAX package
+------------
+
+The REAX package has been removed since it was superseded by the
+:ref:`REAXFF package <PKG-REAXFF>`.  The REAXFF package has been tested
+to yield equivalent results to the REAX package, offers better
+performance, supports OpenMP multi-threading via OPENMP, and GPU and
+threading parallelization through KOKKOS.  The new pair styles are not
+syntax compatible with the removed reax pair style, so input files will
+have to be adapted.  The REAXFF package was originally called
+USER-REAXC.
+
+USER-REAXC package
+------------------
+
+.. deprecated:: 7Feb2024
+
+The USER-REAXC package has been renamed to :ref:`REAXFF <PKG-REAXFF>`.
+In the process also the pair style and related fixes were renamed to use
+the "reaxff" string instead of "reax/c". For a while LAMMPS was maintaining
+backward compatibility by providing aliases for the styles.  These have
+been removed, so using "reaxff" is now *required*.
+
 USER-CUDA package
 -----------------
 
-.. deprecated:: 31May2016
-
 The USER-CUDA package had been removed, since it had been unmaintained
 for a long time and had known bugs and problems.  Significant parts of
 the design were transferred to the
@@ -170,39 +160,19 @@ performance characteristics on NVIDIA GPUs. Both, the KOKKOS
 and the :ref:`GPU package <PKG-GPU>` are maintained
 and allow running LAMMPS with GPU acceleration.
 
-Compute atom/molecule
----------------------
+i-PI tool
+---------
 
-.. deprecated:: 11 Dec2015
+.. versionchanged:: 27Jun2024
 
-The atom/molecule command has been removed from LAMMPS since it was superseded
-by the more general and extensible "chunk infrastructure".  Here the system is
-partitioned in one of many possible ways - including using molecule IDs -
-through the :doc:`compute chunk/atom <compute_chunk_atom>` command and then
-summing is done using :doc:`compute reduce/chunk <compute_reduce_chunk>` Please
-refer to the :doc:`chunk HOWTO <Howto_chunk>` section for an overview.
+The i-PI tool has been removed from the LAMMPS distribution.  Instead,
+instructions to install i-PI from PyPI via pip are provided.
 
-Fix ave/spatial and fix ave/spatial/sphere
-------------------------------------------
+LAMMPS shell
+------------
 
-.. deprecated:: 11Dec2015
+.. versionchanged:: 29Aug2024
 
-The fixes ave/spatial and ave/spatial/sphere have been removed from LAMMPS
-since they were superseded by the more general and extensible "chunk
-infrastructure".  Here the system is partitioned in one of many possible
-ways through the :doc:`compute chunk/atom <compute_chunk_atom>` command
-and then averaging is done using :doc:`fix ave/chunk <fix_ave_chunk>`.
-Please refer to the :doc:`chunk HOWTO <Howto_chunk>` section for an overview.
-
-restart2data tool
------------------
-
-.. deprecated:: 23Nov2013
-
-The functionality of the restart2data tool has been folded into the
-LAMMPS executable directly instead of having a separate tool.  A
-combination of the commands :doc:`read_restart <read_restart>` and
-:doc:`write_data <write_data>` can be used to the same effect.  For
-added convenience this conversion can also be triggered by
-:doc:`command-line flags <Run_options>`
+The LAMMPS shell has been removed from the LAMMPS distribution. Users
+are encouraged to use the :ref:`LAMMPS-GUI <lammps_gui>` tool instead.
 

doc/src/Developer.rst

@@ -24,5 +24,4 @@ of time and requests from the LAMMPS user community.
    Classes
    Developer_platform
    Developer_utils
-   Developer_internal
    Developer_grid

doc/src/Developer_code_design.rst

@@ -203,7 +203,6 @@ processed in the expected order before types are removed from dynamic
 dispatch.
 
 .. admonition:: Important Notes
-   :class: note
 
    In order to be able to detect incompatibilities at compile time and
    to avoid unexpected behavior, it is crucial that all member functions
@@ -301,24 +300,18 @@ Formatting with the {fmt} library
 
 The LAMMPS source code includes a copy of the `{fmt} library
 <https://fmt.dev>`_, which is preferred over formatting with the
-"printf()" family of functions.  The primary reason is that it allows a
-typesafe default format for any type of supported data.  This is
+"printf()" family of functions.  The primary reason is that it allows
+a typesafe default format for any type of supported data.  This is
 particularly useful for formatting integers of a given size (32-bit or
-64-bit) which may require different format strings depending on compile
-time settings or compilers/operating systems.  Furthermore, {fmt} gives
-better performance, has more functionality, a familiar formatting syntax
-that has similarities to ``format()`` in Python, and provides a facility
-that can be used to integrate format strings and a variable number of
-arguments into custom functions in a much simpler way than the varargs
-mechanism of the C library.  Finally, {fmt} has been included into the
-C++20 language standard as ``std::format()``, so changes to adopt it are
-future-proof, for as long as they are not using any extensions that are
-not (yet) included into C++.
-
-The long-term plan is to switch to using ``std::format()`` instead of
-``fmt::format()`` when the minimum C++ standard required for LAMMPS will
-be set to C++20. See the :ref:`basic build instructions <compile>` for
-more details.
+64-bit) which may require different format strings depending on
+compile time settings or compilers/operating systems.  Furthermore,
+{fmt} gives better performance, has more functionality, a familiar
+formatting syntax that has similarities to ``format()`` in Python, and
+provides a facility that can be used to integrate format strings and a
+variable number of arguments into custom functions in a much simpler
+way than the varargs mechanism of the C library.  Finally, {fmt} has
+been included into the C++20 language standard, so changes to adopt it
+are future-proof.
 
 Formatted strings are frequently created by calling the
 ``fmt::format()`` function, which will return a string as a
@@ -326,13 +319,11 @@ Formatted strings are frequently created by calling the
 ``printf()``, the {fmt} library uses ``{}`` to embed format descriptors.
 In the simplest case, no additional characters are needed, as {fmt} will
 choose the default format based on the data type of the argument.
-Otherwise, the :cpp:func:`utils::print() <LAMMPS_NS::utils::print>`
-function may be used instead of ``printf()`` or ``fprintf()``.  In
-addition, several LAMMPS output functions, that originally accepted a
-single string as argument have been overloaded to accept a format string
-with optional arguments as well (e.g., ``Error::all()``,
-``Error::one()``, :cpp:func:`utils::logmesg()
-<LAMMPS_NS::utils::logmesg>`).
+Otherwise, the ``fmt::print()`` function may be used instead of
+``printf()`` or ``fprintf()``.  In addition, several LAMMPS output
+functions, that originally accepted a single string as argument have
+been overloaded to accept a format string with optional arguments as
+well (e.g., ``Error::all()``, ``Error::one()``, ``utils::logmesg()``).
 
 Summary of the {fmt} format syntax
 ==================================

doc/src/Developer_comm_ops.rst

@@ -79,19 +79,19 @@ containing ``double`` values.  To correctly store integers that may be
 64-bit (bigint, tagint, imageint) in the buffer, you need to use the
 :ref:`ubuf union <communication_buffer_coding_with_ubuf>` construct.
 
-The *Fix*, *Bond*, *Compute*, and *Dump* classes can also invoke the
-same kind of forward and reverse communication operations using the
-same *Comm* class methods.  Likewise, the same pack/unpack methods and
+The *Fix*, *Compute*, and *Dump* classes can also invoke the same kind
+of forward and reverse communication operations using the same *Comm*
+class methods.  Likewise, the same pack/unpack methods and
 comm_forward/comm_reverse variables must be defined by the calling
-*Fix*, *Bond*, *Compute*, or *Dump* class.
+*Fix*, *Compute*, or *Dump* class.
 
-For all of these classes, there is an optional second argument to the
+For *Fix* classes, there is an optional second argument to the
 *forward_comm()* and *reverse_comm()* call which can be used when the
-class performs multiple modes of communication, with different numbers
-of values per atom.  The class should set the *comm_forward* and
+fix performs multiple modes of communication, with different numbers
+of values per atom.  The fix should set the *comm_forward* and
 *comm_reverse* variables to the maximum value, but can invoke the
 communication for a particular mode with a smaller value.  For this
-to work, the *pack_forward_comm()*, etc. methods typically use a class
+to work, the *pack_forward_comm()*, etc methods typically use a class
 member variable to choose which values to pack/unpack into/from the
 buffer.
 

doc/src/Developer_flow.rst

@@ -209,7 +209,7 @@ nve, nvt, npt.
 
 At the end of the timestep, fixes that contain an ``end_of_step()``
 method are invoked.  These typically perform a diagnostic calculation,
-e.g. the ave/time and ave/chunk fixes.  The final operation of the
+e.g. the ave/time and ave/spatial fixes.  The final operation of the
 timestep is to perform any requested output, via the ``write()`` method
 of the Output class.  There are 3 kinds of LAMMPS output: thermodynamic
 output to the screen and log file, snapshots of atom data to a dump

doc/src/Developer_internal.rst

@@ -1,120 +0,0 @@
-Internal Styles
----------------
-
-LAMMPS has a number of styles that are not meant to be used in an input
-file and thus are not documented in the :doc:`LAMMPS command
-documentation <Commands_all>`.  The differentiation between user
-commands and internal commands is through the case of the command name:
-user commands and styles are all lower case, internal styles are all
-upper case.  Internal styles are not called from the input file, but
-their classes are instantiated by other styles.  Often they are
-created by other styles to store internal data or to perform actions
-regularly at specific steps of the simulation.
-
-The paragraphs below document some of those styles that have general
-utility and may be used to avoid redundant implementation.
-
-DEPRECATED Styles
-^^^^^^^^^^^^^^^^^
-
-The styles called DEPRECATED (e.g. pair, bond, fix, compute, region, etc.)
-have the purpose to inform users that a specific style has been removed
-or renamed.  This is achieved by creating an alias for the deprecated
-style to the corresponding class.  For example, the fix style DEPRECATED
-is aliased to fix style ave/spatial and fix style ave/spatial/sphere with
-the following code:
-
-.. code-block:: c++
-
-   FixStyle(DEPRECATED,FixDeprecated);
-   FixStyle(ave/spatial,FixDeprecated);
-   FixStyle(ave/spatial/sphere,FixDeprecated);
-
-The individual class will then determine based on the style name
-what action to perform:
-
-- inform that the style has been removed and what style replaces it, if any, and then error out
-- inform that the style has been renamed and then either execute the replacement or error out
-- inform that the style is no longer required, and it is thus ignored and continue
-
-There is also a section in the user's guide for :doc:`removed commands
-and packages <Commands_removed>` with additional explanations.
-
-Internal fix styles
-^^^^^^^^^^^^^^^^^^^
-
-These provide an implementation of features that would otherwise have
-been replicated across multiple styles.  The used fix ID is generally
-derived from the compute or fix ID creating the fix with some string
-appended.  When needed, the fix can be looked up with
-``Modify::get_fix_by_id()``, which returns a pointer to the fix
-instance.  The data managed by the fix can be accessed just as for other
-fixes that can be used in input files.
-
-fix DUMMY
-"""""""""
-
-Most fix classes cannot be instantiated before the simulation box has
-been created since they access data that is only available then.
-However, in some cases it is required that a fix must be at or close to
-the top of the list of all fixes.  In those cases an instance of the
-DUMMY fix style may be created by calling ``Modify::add_fix()`` and then
-later replaced by the intended fix through calling ``Modify::replace_fix()``.
-
-fix STORE/ATOM
-""""""""""""""
-
-Fix STORE/ATOM can be used as persistent storage of per-atom data.
-
-**Syntax**
-
-.. code-block:: LAMMPS
-
-   fix ID group-ID STORE/ATOM N1 N2 gflag rflag
-
-* ID, group-ID are documented in :doc:`fix <fix>` command
-* STORE/ATOM = style name of this fix command
-* N1 = 1, N2 = 0 : data is per-atom vector = single value per atom
-* N1 > 1, N2 = 0 : data is per-atom array = N1 values per atom
-* N1 > 0, N2 > 0 : data is per-atom tensor = N1xN2 values per atom
-* gflag = 1 communicate per-atom values with ghost atoms, 0 do not update ghost atom data
-* rflag = 1 store per-atom value in restart file, 0 do not store data in restart
-
-Similar functionality is also available through using custom per-atom
-properties with :doc:`fix property/atom <fix_property_atom>`.  The
-choice between the two fixes should be based on whether the user should
-be able to access this per-atom data: if yes, then fix property/atom is
-preferred, otherwise fix STORE/ATOM.
-
-fix STORE/GLOBAL
-""""""""""""""""
-
-Fix STORE/GLOBAL can be used as persistent storage of global data with support for restarts
-
-**Syntax**
-
-.. code-block:: LAMMPS
-
-   fix ID group-ID STORE/GLOBAL N1 N2
-
-* ID, group-ID are documented in :doc:`fix <fix>` command
-* STORE/GLOBAL = style name of this fix command
-* N1 >=1 : number of global items to store
-* N2 = 1 : data is global vector of length N1
-* N2 > 1 : data is global N1xN2 array
-
-fix STORE/LOCAL
-"""""""""""""""
-
-Fix STORE/LOCAL can be used as persistent storage for local data
-
-**Syntax**
-
-.. code-block:: LAMMPS
-
-   fix ID group-ID STORE/LOCAL Nreset Nvalues
-
-* ID, group-ID are documented in :doc:`fix <fix>` command
-* STORE/LOCAL = style name of this fix command
-* Nreset = frequency at which local data is available
-* Nvalues = number of values per local item, that is the number of columns

doc/src/Developer_notes.rst

@@ -7,7 +7,13 @@ typically document what a variable stores, what a small section of
 code does, or what a function does and its input/outputs.  The topics
 on this page are intended to document code functionality at a higher level.
 
-.. contents:: Available notes
+Available topics are:
+
+- `Reading and parsing of text and text files`_
+- `Requesting and accessing neighbor lists`_
+- `Choosing between a custom atom style, fix property/atom, and fix STORE/ATOM`_
+- `Fix contributions to instantaneous energy, virial, and cumulative energy`_
+- `KSpace PPPM FFT grids`_
 
 ----
 
@@ -212,149 +218,6 @@ command:
 
    neighbor->add_request(this, "delete_atoms", NeighConst::REQ_FULL);
 
-
-Errors, warnings, and informational messages
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-LAMMPS has specialized functionality to handle errors (which should
-terminate LAMMPS), warning messages (which should indicate possible
-problems *without* terminating LAMMPS), and informational text for
-messages about the progress and chosen settings.  We *strongly*
-encourage using these facilities and to *stay away* from using
-``printf()`` or ``fprintf()`` or ``std::cout`` or ``std::cerr`` and
-calling ``MPI_Abort()`` or ``exit()`` directly.  Warnings and
-informational messages should be printed only on MPI rank 0 to avoid
-flooding the output when running in parallel with many MPI processes.
-
-**Errors**
-
-When LAMMPS encounters an error, for example a syntax error in the
-input, then a suitable error message should be printed giving a brief,
-one line remark about the reason and then call either ``Error::all()``
-or ``Error::one()``.  ``Error::all()`` must be called when the failing
-code path is executed by *all* MPI processes and the error condition
-will appear for *all* MPI processes the same.  If desired, each MPI
-process may set a flag to either 0 or 1 and then MPI_Allreduce()
-searching for the maximum can be used to determine if there was an error
-on *any* of the MPI processes and make this information available to
-*all*.  ``Error::one()`` in contrast needs to be called when only one or
-a few MPI processes execute the code path or can have the error
-condition.  ``Error::all()`` is generally the preferred option.
-
-Calling these functions does not abort LAMMPS directly, but rather
-throws either a ``LAMMPSException`` (from ``Error::all()``) or a
-``LAMMPSAbortException`` (from ``Error::one()``).  These exceptions are
-caught by the LAMMPS ``main()`` program and then handled accordingly.
-The reason for this approach is to support applications, especially
-graphical applications like :ref:`LAMMPS-GUI <lammps_gui>`, that are
-linked to the LAMMPS library and have a mechanism to avoid that an error
-in LAMMPS terminates the application. By catching the exceptions, the
-application can delete the failing LAMMPS class instance and create a
-new one to try again.  In a similar fashion, the :doc:`LAMMPS Python
-module <Python_module>` checks for this and then re-throws corresponding
-Python exception, which in turn can be caught by the calling Python
-code.
-
-There are multiple "signatures" that can be called:
-
-- ``Error::all(FLERR, "Error message")``: this will abort LAMMPS with
-  the error message "Error message", followed by the last line of input
-  that was read and processed before the error condition happened.
-
-- ``Error::all(FLERR, Error::NOLASTLINE, "Error message")``: this is the
-  same as before but without the last line of input.  This is preferred
-  for errors that would happen *during* a :doc:`run <run>` or
-  :doc:`minimization <minimize>`, since showing the "run" or "minimize"
-  command would be the last line, but is unrelated to the error.
-
-- ``Error::all(FLERR, idx, "Error message")``: this is for argument
-  parsing where "idx" is the index (starting at 0) of the argument for a
-  LAMMPS command that is causing the failure (use -1 for the command
-  itself).  For index 0, you need to use the constant ``Error::ARGZERO``
-  to work around the inability of some compilers to disambiguate between
-  a NULL pointer and an integer constant 0, even with an added type cast.
-  The output may also include the last input line *before* and
-  *after*, if they differ due to substituting variables.  A textual
-  indicator is pointing to the specific word that failed.  Using the
-  constant ``Error::NOPOINTER`` in place of the *idx* argument will
-  suppress the marker and then the behavior is like the *idx* argument
-  is not provided.
-
-FLERR is a macro containing the filename and line where the Error class
-is called and that information is appended to the error message.  This
-allows to quickly find the relevant source code causing the error.  For
-all three signatures, the single string "Error message" may be replaced
-with a format string using '{}' placeholders and followed by a variable
-number of arguments, one for each placeholder. This format string and
-the arguments are then handed for formatting to the `{fmt} library
-<https://fmt.dev>`_ (which is bundled with LAMMPS) and thus allow
-processing similar to the "format()" functionality in Python.
-
-.. note::
-
-   For commands like :doc:`fix ave/time <fix_ave_time>` that accept
-   wildcard arguments, the :cpp:func:`utils::expand_args` function
-   may be passed as an optional argument where the function will provide
-   a map to the original arguments from the expanded argument indices.
-
-For complex errors, that can have multiple causes and which cannot be
-explained in a single line, you can append to the error message, the
-string created by :cpp:func:`utils::errorurl`, which then provides a
-URL pointing to a paragraph of the :doc:`Errors_details` that
-corresponds to the number provided. Example:
-
-.. code-block:: c++
-
-   error->all(FLERR, "Unknown identifier in data file: {}{}", keyword, utils::errorurl(1));
-
-This will output something like this:
-
-.. parsed-literal::
-
-   ERROR: Unknown identifier in data file: Massess
-   For more information see https://docs.lammps.org/err0001 (src/read_data.cpp:1482)
-   Last input line: read_data       data.peptide
-
-Where the URL points to the first paragraph with explanations on
-the :doc:`Errors_details` page in the manual.
-
-**Warnings**
-
-To print warnings, the ``Errors::warning()`` function should be used.
-It also requires the FLERR macros as first argument to easily identify
-the location of the warning in the source code.  Same as with the error
-functions above, the function has two variants: one just taking a single
-string as final argument and a second that uses the `{fmt} library
-<https://fmt.dev>`_ to make it similar to, say, ``fprintf()``.  One
-motivation to use this function is that it will output warnings with
-always the same capitalization of the leading "WARNING" string.  A
-second is that it has a built in rate limiter.  After a given number (by
-default 100), that can be set via the :doc:`thermo_modify command
-<thermo_modify>` no more warnings are printed.  Also, warnings are
-written consistently to both screen and logfile or not, depending on the
-settings for :ref:`screen <screen>` or :doc:`logfile <log>` output.
-
-.. note::
-
-   Unlike ``Error::all()``, the warning function will produce output on
-   *every* MPI process, so it typically would be prefixed with an if
-   statement testing for ``comm->me == 0``, i.e. limiting output to MPI
-   rank 0.
-
-**Informational messages**
-
-Finally, for informational message LAMMPS has the
-:cpp:func:`utils::logmesg() convenience function
-<LAMMPS_NS::utils::logmesg>`.  It also uses the `{fmt} library
-<https://fmt.dev>`_ to support using a format string followed by a
-matching number of arguments.  It will output the resulting formatted
-text to both, the screen and the logfile and will honor the
-corresponding settings about whether this output is active and to which
-file it should be send.  Same as for ``Error::warning()``, it would
-produce output for every MPI process and thus should usually be called
-only on MPI rank 0 to avoid flooding the output when running with many
-parallel processes.
-
 Choosing between a custom atom style, fix property/atom, and fix STORE/ATOM
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

doc/src/Developer_org.rst

@@ -94,12 +94,12 @@ represents what is generally referred to as an "instance of LAMMPS".  It
 is a composite holding pointers to instances of other core classes
 providing the core functionality of the MD engine in LAMMPS and through
 them abstractions of the required operations.  The constructor of the
-LAMMPS class will instantiate those instances, process the command-line
+LAMMPS class will instantiate those instances, process the command line
 flags, initialize MPI (if not already done) and set up file pointers for
 input and output.  The destructor will shut everything down and free all
 associated memory.  Thus code for the standalone LAMMPS executable in
 ``main.cpp`` simply initializes MPI, instantiates a single instance of
-LAMMPS while passing it the command-line flags and input script. It
+LAMMPS while passing it the command line flags and input script. It
 deletes the LAMMPS instance after the method reading the input returns
 and shuts down the MPI environment before it exits the executable.
 

doc/src/Developer_unittest.rst

@@ -227,12 +227,12 @@ Tests for the C-style library interface
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Tests for validating the LAMMPS C-style library interface are in the
-``unittest/c-library`` folder.  They text either utility functions or
-LAMMPS commands, but use the functions implemented in
-``src/library.cpp`` as much as possible.  There may be some overlap with
-other tests as far as the LAMMPS functionality is concerned, but the
-focus is on testing the C-style library API.  The tests are distributed
-over multiple test programs which try to match the grouping of the
+``unittest/c-library`` folder.  They are implemented either to be used
+for utility functions or for LAMMPS commands, but use the functions
+implemented in the ``src/library.cpp`` file as much as possible.  There
+may be some overlap with other tests, but only in as much as is required
+to test the C-style library API.  The tests are distributed over
+multiple test programs which try to match the grouping of the
 functions in the source code and :ref:`in the manual <lammps_c_api>`.
 
 This group of tests also includes tests invoking LAMMPS in parallel
@@ -258,7 +258,7 @@ Tests for the Python module and package
 
 The ``unittest/python`` folder contains primarily tests for classes and
 functions in the LAMMPS python module but also for commands in the
-PYTHON package.  These tests are only enabled, if the necessary
+PYTHON package.  These tests are only enabled if the necessary
 prerequisites are detected or enabled during configuration and
 compilation of LAMMPS (shared library build enabled, Python interpreter
 found, Python development files found).
@@ -272,30 +272,29 @@ Tests for the Fortran interface
 
 Tests for using the Fortran module are in the ``unittest/fortran``
 folder.  Since they are also using the GoogleTest library, they require
-test wrappers written in C++ that will call fortran functions with a C
-function interface through ISO_C_BINDINGS which will in turn call the
-functions in the LAMMPS Fortran module.
+implementing test wrappers in C++ that will call fortran functions
+which provide a C function interface through ISO_C_BINDINGS that will in
+turn call the functions in the LAMMPS Fortran module.
 
 Tests for the C++-style library interface
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The tests in the ``unittest/cplusplus`` folder are somewhat similar to
 the tests for the C-style library interface, but do not need to test the
-convenience and utility functions that are only available through the
-C-style library interface.  Instead they focus on the more generic
-features that are used in LAMMPS internally.  This part of the unit
-tests is currently still mostly in the planning stage.
+several convenience and utility functions that are only available through
+the C-style interface.  Instead it can focus on the more generic features
+that are used internally.  This part of the unit tests is currently still
+mostly in the planning stage.
 
 Tests for reading and writing file formats
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The ``unittest/formats`` folder contains test programs for reading and
-writing files like data files, restart files, potential files or dump
-files.  This covers simple things like the file i/o convenience
-functions in the ``utils::`` namespace to complex tests of atom styles
-where creating and deleting of atoms with different properties is tested
-in different ways and through script commands or reading and writing of
-data or restart files.
+writing files like data files, restart files, potential files or dump files.
+This covers simple things like the file i/o convenience functions in the
+``utils::`` namespace to complex tests of atom styles where creating and
+deleting atoms with different properties is tested in different ways
+and through script commands or reading and writing of data or restart files.
 
 Tests for styles computing or modifying forces
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -444,7 +443,7 @@ file for a style that is similar to one to be tested.  The file name should
 follow the naming conventions described above and after copying the file,
 the first step is to replace the style names where needed.  The coefficient
 values do not have to be meaningful, just in a reasonable range for the
-given system.  It does not matter if some forces are large, for as long as
+given system.  It does not matter if some forces are large, as long as
 they do not diverge.
 
 The template input files define a large number of index variables at the top
@@ -477,7 +476,7 @@ the tabulated coulomb, to test both code paths.  The reference results in the YA
 files then should be compared manually, if they agree well enough within the limits
 of those two approximations.
 
-The ``test_pair_style`` and equivalent programs have special command-line options
+The ``test_pair_style`` and equivalent programs have special command line options
 to update the YAML files. Running a command like
 
 .. code-block:: bash
@@ -532,20 +531,19 @@ Python module.
 Troubleshooting failed unit tests
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-There are by default no unit tests for newly added features (e.g. pair,
-fix, or compute styles) unless your pull request also includes tests for
-these added features.  If you are modifying some existing LAMMPS
-features, you may see failures for existing tests, if your modifications
-have some unexpected side effects or your changes render the existing
-test invalid.  If you are adding an accelerated version of an existing
-style, then only tests for INTEL, KOKKOS (with OpenMP only), OPENMP, and
-OPT will be run automatically.  Tests for the GPU package are time
-consuming and thus are only run *after* a merge, or when a special
-label, ``gpu_unit_tests`` is added to the pull request.  After the test
-has started, it is often best to remove the label since every PR
-activity will re-trigger the test (that is a limitation of triggering a
-test with a label).  Support for unit tests using KOKKOS with GPU
-acceleration is currently not supported.
+The are by default no unit tests for newly added features (e.g. pair, fix,
+or compute styles) unless your pull request also includes tests for the
+added features.  If you are modifying some features, you may see failures
+for existing tests, if your modifications have some unexpected side effects
+or your changes render the existing test invalid.  If you are adding an
+accelerated version of an existing style, then only tests for INTEL,
+KOKKOS (with OpenMP only), OPENMP, and OPT will be run automatically.
+Tests for the GPU package are time consuming and thus are only run
+*after* a merge, or when a special label, ``gpu_unit_tests`` is added
+to the pull request.  After the test has started, it is often best to
+remove the label since every PR activity will re-trigger the test (that
+is a limitation of triggering a test with a label).  Support for unit
+tests when using KOKKOS with GPU acceleration is currently not supported.
 
 When you see a failed build on GitHub, click on ``Details`` to be taken
 to the corresponding LAMMPS Jenkins CI web page.  Click on the "Exit"
@@ -590,7 +588,7 @@ While the epsilon (relative precision) for a single, `IEEE 754 compliant
 <https://en.wikipedia.org/wiki/IEEE_754>`_, double precision floating
 point operation is at about 2.2e-16, the achievable precision for the
 tests is lower due to most numbers being sums over intermediate results
-for which the non-associativity of floating point math leads to larger
+and the non-associativity of floating point math leading to larger
 errors.  As a rule of thumb, the test epsilon can often be in the range
 5.0e-14 to 1.0e-13.  But for "noisy" force kernels, e.g. those a larger
 amount of arithmetic operations involving `exp()`, `log()` or `sin()`
@@ -604,14 +602,14 @@ of floating point operations or that some or most intermediate operations
 may be done using approximations or with single precision floating point
 math.
 
-To rerun a failed unit test individually, change to the ``build`` directory
+To rerun the failed unit test individually, change to the ``build`` directory
 and run the test with verbose output. For example,
 
 .. code-block:: bash
 
     env TEST_ARGS=-v ctest -R ^MolPairStyle:lj_cut_coul_long -V
 
-``ctest`` with the ``-V`` flag also shows the exact command
+``ctest`` with the ``-V`` flag also shows the exact command line
 of the test. One can then use ``gdb --args`` to further debug and
 catch exceptions with the test command, for example,
 

doc/src/Developer_utils.rst

@@ -133,9 +133,6 @@ and parsing files or arguments.
 .. doxygenfunction:: trim_comment
    :project: progguide
 
-.. doxygenfunction:: strcompress
-   :project: progguide
-
 .. doxygenfunction:: strip_style_suffix
    :project: progguide
 
@@ -169,9 +166,6 @@ and parsing files or arguments.
 .. doxygenfunction:: split_lines
    :project: progguide
 
-.. doxygenfunction:: strsame
-   :project: progguide
-
 .. doxygenfunction:: strmatch
    :project: progguide
 
@@ -238,21 +232,12 @@ Convenience functions
 .. doxygenfunction:: logmesg(LAMMPS *lmp, const std::string &mesg)
    :project: progguide
 
-.. doxygenfunction:: print(FILE *fp, const std::string &format, Args&&... args)
-   :project: progguide
-
-.. doxygenfunction:: print(FILE *fp, const std::string &mesg)
-   :project: progguide
-
 .. doxygenfunction:: errorurl
    :project: progguide
 
 .. doxygenfunction:: missing_cmd_args
    :project: progguide
 
-.. doxygenfunction:: point_to_error
-   :project: progguide
-
 .. doxygenfunction:: flush_buffers(LAMMPS *lmp)
    :project: progguide
 

doc/src/Developer_write.rst

@@ -12,4 +12,3 @@ details are provided for writing code for LAMMPS.
 
    Developer_write_pair
    Developer_write_fix
-   Developer_write_command

doc/src/Developer_write_command.rst

@@ -1,348 +0,0 @@
-Writing a new command style
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Command styles allow to do system manipulations or interfaces to the
-operating system.
-
-In the text below, we will discuss the implementation of one example.  As
-shown on the page for :doc:`writing or extending command styles
-<Modify_command>`, in order to implement a new command style, a new class
-must be written that is either directly or indirectly derived from the
-``Command`` class.  There is just one method that must be implemented:
-``Command::command()``.  In addition, a custom constructor is needed to get
-access to the members of the ``LAMMPS`` class like the ``Error`` class to
-print out error messages.  The ``Command::command()`` method processes the
-arguments passed to the command in the input and executes it.  Any other
-methods would be for the convenience of implementation of the new command.
-
-In general, new command styles should be added to the :ref:`EXTRA-COMMAND
-package <PKG-EXTRA-COMMAND>`.  If you feel that your contribution should be
-added to a different package, please consult with the :doc:`LAMMPS
-developers <Intro_authors>` first.  The contributed code needs to support
-the :doc:`traditional GNU make build process <Build_make>` **and** the
-:doc:`CMake build process <Build_cmake>`.
-
-----
-
-Case 1: Implementing the geturl command
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In this section, we will describe the procedure of adding a simple command
-style to LAMMPS: the :doc:`geturl command <geturl>` that allows to download
-files directly without having to rely on an external program like "wget" or
-"curl".  The complete implementation can be found in the files
-``src/EXTRA-COMMAND/geturl.cpp`` and ``src/EXTRA-COMMAND/geturl.h`` of the
-LAMMPS source code.
-
-Interfacing the *libcurl* library
-"""""""""""""""""""""""""""""""""
-
-Rather than implementing the various protocols for downloading files, we
-rely on an external library: `libcurl library <https:://curl.se/libcurl/>`_.
-This requires that the library and its headers are installed.  For the
-traditional GNU make build system, this simply requires edits to the machine
-makefile to add compilation flags like for other libraries.  For the CMake
-based build system, we need to add some lines to the file
-``cmake/Modules/Packages/EXTRA-COMMAND.cmake``:
-
-.. code-block:: cmake
-
-   find_package(CURL QUIET COMPONENTS HTTP HTTPS)
-   option(WITH_CURL "Enable libcurl support" ${CURL_FOUND})
-   if(WITH_CURL)
-     find_package(CURL REQUIRED COMPONENTS HTTP HTTPS)
-     target_compile_definitions(lammps PRIVATE -DLAMMPS_CURL)
-     target_link_libraries(lammps PRIVATE CURL::libcurl)
-   endif()
-
-The first ``find_package()`` command uses a built-in CMake module to find
-an existing *libcurl* installation with development headers and support for
-using the HTTP and HTTPS protocols.  The "QUIET" flag ensures that there is
-no screen output and no error if the search fails.  The status of the search
-is recorded in the "${CURL_FOUND}" variable.  That variable sets the default
-of the WITH_CURL option, which toggles whether support for *libcurl* is included
-or not.
-
-The second ``find_package()`` uses the "REQUIRED" flag to produce an error
-if the WITH_CURL option was set to ``True``, but no suitable *libcurl*
-implementation with development support was found.  This construct is used
-so that the CMake script code inside the ``if(WITH_CURL)`` and ``endif()``
-block can be expanded later to download and compile *libcurl* as part of the
-LAMMPS build process, if it is not found locally.  The
-``target_compile_definitions()`` function added the define ``-DLAMMPS_CURL``
-to the compilation flags when compiling objects for the LAMMPS library.
-This allows to always compile the :doc:`geturl command <geturl>`, but use
-pre-processing to compile in the interface to *libcurl* only when it is
-present and usable and otherwise stop with an error message about the
-unavailability of *libcurl* to execute the functionality of the command.
-
-Header file
-"""""""""""
-
-The first segment of any LAMMPS source should be the copyright and
-license statement.  Note the marker in the first line to indicate to
-editors like emacs that this file is a C++ source, even though the .h
-extension suggests a C source (this is a convention inherited from the
-very beginning of the C++ version of LAMMPS).
-
-.. code-block:: c++
-
-   /* -*- c++ -*- ----------------------------------------------------------
-      LAMMPS - Large-scale Atomic/Molecular Massively Parallel Simulator
-      https://www.lammps.org/, Sandia National Laboratories
-      LAMMPS development team: developers@lammps.org
-
-      Copyright (2003) Sandia Corporation.  Under the terms of Contract
-      DE-AC04-94AL85000 with Sandia Corporation, the U.S. Government retains
-      certain rights in this software.  This software is distributed under
-      the GNU General Public License.
-
-      See the README file in the top-level LAMMPS directory.
-   ------------------------------------------------------------------------- */
-
-Every command style must be registered in LAMMPS by including the following
-lines of code in the second part of the header after the copyright
-message and before the include guards for the class definition:
-
-.. code-block:: c++
-
-   #ifdef COMMAND_CLASS
-   // clang-format off
-   CommandStyle(geturl,GetURL);
-   // clang-format on
-   #else
-
-This block between ``#ifdef COMMAND_CLASS`` and ``#else`` will be
-included by the ``Input`` class in ``input.cpp`` to build a map of
-"factory functions" that will create an instance of a Command class
-and call its ``command()`` method.  The map connects the name of the
-command ``geturl`` with the name of the class ``GetURL``.  During
-compilation, LAMMPS constructs a file ``style_command.h`` that contains
-``#include`` statements for all "installed" command styles.  Before
-including ``style_command.h`` into ``input.cpp``, the ``COMMAND_CLASS``
-define is set and the ``CommandStyle(name,class)`` macro defined.  The
-code of the macro adds the installed command styles to the "factory map"
-which enables the ``Input`` to execute the command.
-
-The list of header files to include in ``style_command.h`` is automatically
-updated by the build system if there are new files, so the presence of the
-new header file in the ``src/EXTRA-COMMAND`` folder and the enabling of the
-EXTRA-COMMAND package will trigger LAMMPS to include the new command style
-when it is (re-)compiled.  The "// clang-format" format comments are needed
-so that running :ref:`clang-format <clang-format>` on the file will not
-insert unwanted blanks which would break the ``CommandStyle`` macro.
-
-The third part of the header file is the actual class definition of the
-``GetURL`` class.  This has the custom constructor and the ``command()``
-method implemented by this command style.  For the constructor there is
-nothing to do but to pass the ``lmp`` pointer to the base class.  Since the
-``command()`` method is labeled "virtual" in the base class, it must be
-given the "override" property.
-
-.. code-block:: c++
-
-   #ifndef LMP_GETURL_H
-   #define LMP_GETURL_H
-
-   #include "command.h"
-
-   namespace LAMMPS_NS {
-
-   class GetURL : public Command {
-    public:
-     GetURL(class LAMMPS *lmp) : Command(lmp) {};
-     void command(int, char **) override;
-   };
-   }    // namespace LAMMPS_NS
-   #endif
-   #endif
-
-The "override" property helps to detect unexpected mismatches because
-compilation will stop with an error in case the signature of a function
-is changed in the base class without also changing it in all derived
-classes.
-
-Implementation file
-"""""""""""""""""""
-
-We move on to the implementation of the ``GetURL`` class in the
-``geturl.cpp`` file.  This file also starts with a LAMMPS copyright and
-license header.  Below that notice is typically the space where comments may
-be added with additional information about this specific file, the
-author(s), affiliation(s), and email address(es).  This way the contributing
-author(s) can be easily contacted, when there are questions about the
-implementation later.  Since the file(s) may be around for a long time, it
-is beneficial to use some kind of "permanent" email address, if possible.
-
-.. code-block:: c++
-
-   /* ----------------------------------------------------------------------
-      LAMMPS - Large-scale Atomic/Molecular Massively Parallel Simulator
-      https://www.lammps.org/, Sandia National Laboratories
-      LAMMPS development team: developers@lammps.org
-
-      Copyright (2003) Sandia Corporation.  Under the terms of Contract
-      DE-AC04-94AL85000 with Sandia Corporation, the U.S. Government retains
-      certain rights in this software.  This software is distributed under
-      the GNU General Public License.
-
-      See the README file in the top-level LAMMPS directory.
-   ------------------------------------------------------------------------- */
-
-   /* ----------------------------------------------------------------------
-      Contributing authors:  Axel Kohlmeyer (Temple U),
-   ------------------------------------------------------------------------- */
-
-   #include "geturl.h"
-
-   #include "comm.h"
-   #include "error.h"
-
-   #if defined(LAMMPS_CURL)
-   #include <curl/curl.h>
-   #endif
-
-   using namespace LAMMPS_NS;
-
-The second section of the implementation file has various include
-statements.  The include file for the class header has to come first, then a
-couple of LAMMPS classes (sorted alphabetically) followed by the header for
-the *libcurl* interface.  This is wrapped into an ``#ifdef`` block so that
-LAMMPS will compile this file without error when the *libcurl* header is not
-available and thus the define not set.  The final statement of this segment
-imports the ``LAMMPS_NS::`` namespace globally for this file.  This way, all
-LAMMPS specific functions and classes do not have to be prefixed with
-``LAMMPS_NS::``.
-
-The command() function (required)
-"""""""""""""""""""""""""""""""""
-
-Since the required custom constructor is trivial and implemented in the
-header, there is only one function that must be implemented for a command
-style and that is the ``command()`` function.
-
-.. code-block:: c++
-
-   void GetURL::command(int narg, char **arg)
-   {
-   #if !defined(LAMMPS_CURL)
-     error->all(FLERR, "LAMMPS has not been compiled with libcurl support");
-   #else
-     if (narg < 1) utils::missing_cmd_args(FLERR, "geturl", error);
-     int verify = 1;
-     int overwrite = 1;
-     int verbose = 0;
-
-This first part also has the ``#ifdef`` block depending on the LAMMPS_CURL
-define.  This way the command will simply print an error, if *libcurl* is
-not available but will not fail to compile.  Furthermore, it sets the
-defaults for the following optional arguments.
-
-.. code-block:: c++
-
-     // process arguments
-
-     std::string url = arg[0];
-
-     // sanity check
-
-     if ((url.find(':') == std::string::npos) || (url.find('/') == std::string::npos))
-       error->all(FLERR, "URL '{}' is not a supported URL", url);
-
-     std::string output = url.substr(url.find_last_of('/') + 1);
-     if (output.empty()) error->all(FLERR, "URL '{}' must end in a file string", url);
-
-This block stores the positional, i.e. non-optional argument of the URL to
-be downloaded and adds a couple of sanity checks on the string to make sure it is
-a valid URL.  Also it derives the default name of the output file from the URL.
-
-.. code-block:: c++
-
-     int iarg = 1;
-     while (iarg < narg) {
-       if (strcmp(arg[iarg], "output") == 0) {
-         if (iarg + 2 > narg) utils::missing_cmd_args(FLERR, "geturl output", error);
-         output = arg[iarg + 1];
-         ++iarg;
-       } else if (strcmp(arg[iarg], "overwrite") == 0) {
-         if (iarg + 2 > narg) utils::missing_cmd_args(FLERR, "geturl overwrite", error);
-         overwrite = utils::logical(FLERR, arg[iarg + 1], false, lmp);
-         ++iarg;
-       } else if (strcmp(arg[iarg], "verify") == 0) {
-         if (iarg + 2 > narg) utils::missing_cmd_args(FLERR, "geturl verify", error);
-         verify = utils::logical(FLERR, arg[iarg + 1], false, lmp);
-         ++iarg;
-       } else if (strcmp(arg[iarg], "verbose") == 0) {
-         if (iarg + 2 > narg) utils::missing_cmd_args(FLERR, "geturl verbose", error);
-         verbose = utils::logical(FLERR, arg[iarg + 1], false, lmp);
-         ++iarg;
-       } else {
-         error->all(FLERR, "Unknown geturl keyword: {}", arg[iarg]);
-       }
-       ++iarg;
-     }
-
-This block parses the optional arguments following the URL and stops with an
-error if there are arguments missing or an unknown argument is encountered.
-
-.. code-block:: c++
-
-     // only download files from rank 0
-
-     if (comm->me != 0) return;
-
-     if (!overwrite && platform::file_is_readable(output)) return;
-
-     // open output file for writing
-
-     FILE *out = fopen(output.c_str(), "wb");
-     if (!out)
-       error->all(FLERR, "Cannot open output file {} for writing: {}", output, utils::getsyserror());
-
-Here all MPI ranks other than 0 will return, so that the URL download will
-only happen from a single MPI rank. For that rank the output file is opened
-for writing using the C library function ``fopen()``.
-
-.. code-block:: c++
-
-     // initialize curl and perform download
-
-     CURL *curl;
-     curl_global_init(CURL_GLOBAL_DEFAULT);
-     curl = curl_easy_init();
-     if (curl) {
-       (void) curl_easy_setopt(curl, CURLOPT_URL, url.c_str());
-       (void) curl_easy_setopt(curl, CURLOPT_WRITEDATA, (void *) out);
-       (void) curl_easy_setopt(curl, CURLOPT_FILETIME, 1L);
-       (void) curl_easy_setopt(curl, CURLOPT_FAILONERROR, 1L);
-       if (verbose && screen) {
-         (void) curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
-         (void) curl_easy_setopt(curl, CURLOPT_STDERR, (void *) screen);
-       }
-       if (!verify) {
-         (void) curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
-         (void) curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
-       }
-       auto res = curl_easy_perform(curl);
-       if (res != CURLE_OK) {
-         long response = 0L;
-         curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
-         error->one(FLERR, "Download of {} failed with: {} {}", output, curl_easy_strerror(res),
-                    response);
-       }
-       curl_easy_cleanup(curl);
-
-This block now implements the actual URL download with the selected options
-via the "easy" interface of *libcurl*.  For the details of what these
-function calls do, please have a look at the `*libcurl documentation
-<https://curl.se/libcurl/c/allfuncs.html>`_.
-
- .. code-block:: c++
-
-     }
-     curl_global_cleanup();
-     fclose(out);
-   #endif
-   }
-
-Finally, the previously opened file is closed and the command is complete.

doc/src/Developer_write_fix.rst

@@ -96,8 +96,8 @@ Here the we specify which methods of the fix should be called during
      MPI_Allreduce(localAvgVel, globalAvgVel, 4, MPI_DOUBLE, MPI_SUM, world);
      scale3(1.0 / globalAvgVel[3], globalAvgVel);
      if ((comm->me == 0) && screen) {
-       utils::print(screen, "{}, {}, {}\n",
-                    globalAvgVel[0], globalAvgVel[1], globalAvgVel[2]);
+       fmt::print(screen,"{}, {}, {}\n",
+                  globalAvgVel[0], globalAvgVel[1], globalAvgVel[2]);
      }
    }
 

doc/src/Developer_write_pair.rst

@@ -160,7 +160,7 @@ message and before the include guards for the class definition:
 
    #endif
 
-This block between ``#ifdef PAIR_CLASS`` and ``#else`` will be
+This block of between ``#ifdef PAIR_CLASS`` and ``#else`` will be
 included by the ``Force`` class in ``force.cpp`` to build a map of
 "factory functions" that will create an instance of these classes and
 return a pointer to it.  The map connects the name of the pair style,
@@ -310,7 +310,7 @@ the constructor and the destructor.
 
 Pair styles are different from most classes in LAMMPS that define a
 "style", as their constructor only uses the LAMMPS class instance
-pointer as an argument, but **not** the arguments of the
+pointer as an argument, but **not** the command line arguments of the
 :doc:`pair_style command <pair_style>`.  Instead, those arguments are
 processed in the ``Pair::settings()`` function (or rather the version in
 the derived class).  The constructor is the place where global defaults
@@ -891,7 +891,7 @@ originally created from mixing or not).
 These data file output functions are only useful for true pair-wise
 additive potentials, where the potential parameters can be entered
 through *multiple* :doc:`pair_coeff commands <pair_coeff>`.  Pair styles
-that require a single "pair_coeff \* \*" command are not compatible
+that require a single "pair_coeff \* \*" command line are not compatible
 with reading their parameters from data files.  For pair styles like
 *born/gauss* that do support writing to data files, the potential
 parameters will be read from the data file, if present, and
@@ -1122,7 +1122,7 @@ once.  Thus, the ``coeff()`` function has to do three tasks, each of
 which is delegated to a function in the ``PairTersoff`` class:
 
 #. map elements to atom types.  Those follow the potential file name in the
-   command arguments and are processed by the ``map_element2type()`` function.
+   command line arguments and are processed by the ``map_element2type()`` function.
 #. read and parse the potential parameter file in the ``read_file()`` function.
 #. Build data structures where the original and derived parameters are
    indexed by all possible triples of atom types and thus can be looked
@@ -1356,8 +1356,8 @@ either 0 or 1.
 
 The ``morseflag`` variable defaults to 0 and is set to 1 in the
 ``PairAIREBOMorse::settings()`` function which is called by the
-:doc:`pair_style <pair_style>` command.  This function delegates all
-command argument processing and setting of other parameters to the
+:doc:`pair_style <pair_style>` command.  This function delegates
+all command line processing and setting of other parameters to the
 ``PairAIREBO::settings()`` function of the base class.
 
 .. code-block:: c++

doc/src/Errors_debug.rst

@@ -83,7 +83,7 @@ Run LAMMPS from within the debugger
 Running LAMMPS under the control of the debugger as shown below only
 works for a single MPI rank (for debugging a program running in parallel
 you usually need a parallel debugger program).  A simple way to launch
-GDB is to prefix the LAMMPS command-line with ``gdb --args`` and then
+GDB is to prefix the LAMMPS command line with ``gdb --args`` and then
 type the command "run" at the GDB prompt.  This will launch the
 debugger, load the LAMMPS executable and its debug info, and then run
 it.  When it reaches the code causing the segmentation fault, it will
@@ -180,7 +180,7 @@ inspect the behavior of a compiled program by essentially emulating a
 CPU and instrumenting the program while running.  This slows down
 execution quite significantly, but can also report issues that are not
 resulting in a crash.  The default valgrind tool is a memory checker and
-you can use it by prefixing the normal command-line with ``valgrind``.
+you can use it by prefixing the normal command line with ``valgrind``.
 Unlike GDB, this will also work for parallel execution, but it is
 recommended to redirect the valgrind output to a file (e.g. with
 ``--log-file=crash-%p.txt``, the %p will be substituted with the
@@ -235,53 +235,3 @@ from GDB. In addition you get a more specific hint about what cause the
 segmentation fault, i.e. that it is a NULL pointer dereference.  To find
 out which pointer exactly was NULL, you need to use the debugger, though.
 
-Debugging when LAMMPS appears to be stuck
-=========================================
-
-Sometimes the LAMMPS calculation appears to be stuck, that is the LAMMPS
-process or processes are active, but there is no visible progress.  This
-can have multiple reasons:
-
-- The selected styles are slow and require a lot of CPU time and the
-  system is large. When extrapolating the expected speed from smaller
-  systems, one has to factor in that not all models scale linearly with
-  system size, e.g. :doc:`kspace styles like ewald or pppm
-  <kspace_style>`. There is very little that can be done in this case.
-- The output interval is not set or set to a large value with the
-  :doc:`thermo <thermo>` command. I the first case, there will be output
-  only at the first and last step.
-- The output is block-buffered and instead of line-buffered. The output
-  will only be written to the screen after 4096 or 8192 characters of
-  output have accumulated.  This most often happens for files but also
-  with MPI parallel executables for output to the screen, since the
-  output to the screen is handled by the MPI library so that output from
-  all processes can be shown.  This can be suppressed by using the
-  ``-nonblock`` or ``-nb`` command-line flag, which turns off buffering
-  for screen and logfile output.
-- An MPI parallel calculation has a bug where a collective MPI function
-  is called (e.g. ``MPI_Barrier()``, ``MPI_Bcast()``,
-  ``MPI_Allreduce()`` and so on) before pending point-to-point
-  communications are completed or when the collective function is only
-  called from a subset of the MPI processes.  This also applies to some
-  internal LAMMPS functions like ``Error::all()`` which uses
-  ``MPI_Barrier()`` and thus ``Error::one()`` must be called, if the
-  error condition does not happen on all MPI processes simultaneously.
-- Some function in LAMMPS has a bug where a ``for`` or ``while`` loop
-  does not trigger the exit condition and thus will loop forever.  This
-  can happen when the wrong variable is incremented or when one value in
-  a comparison becomes ``NaN`` due to an overflow.
-
-In the latter two cases, further information and stack traces (see above)
-can be obtain by attaching a debugger to a running process.  For that the
-process ID (PID) is needed; this can be found on Linux machines with the
-``top``, ``htop``, ``ps``, or ``pstree`` commands.
-
-Then running the (GNU) debugger ``gdb`` with the ``-p`` flag followed by
-the process id will attach the process to the debugger and stop
-execution of that specific process.  From there on it is possible to
-issue all debugger commands in the same way as when LAMMPS was started
-from the debugger (see above).  Most importantly it is possible to
-obtain a stack trace with the ``where`` command and thus determine where
-in the execution of a timestep this process is.  Also internal data can
-be printed and execution single stepped or continued.  When the debugger
-is exited, the calculation will resume normally.

doc/src/Errors_details.rst

@@ -1,246 +1,12 @@
-Errors and warnings details
-===========================
+Error and warning details
+=========================
 
-Many errors and warnings that LAMMPS outputs are self-explanatory and
-thus straightforward to resolve.  However, there are also cases where
-there is no single cause or simple explanation that can be provided in a
-short message printed by LAMMPS.  Therefore, more detailed discussions
-of such scenarios are provided here; first on a more general level and
-then for specific errors.  In the latter cases, LAMMPS will output a
-short message and then provide a URL that links to a specific section on
-this page.
-
--------
-
-.. contents:: Individual paragraphs
-
-------
-
-General troubleshooting advice
-------------------------------
-
-Below are suggestions that can help to understand the causes of problems
-with simulations leading to errors or unexpected results.
-
-.. _hint01:
-
-Create a small test system
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Debugging problems often requires running a simulation many times with
-small modifications, thus it can be a huge time saver to first assemble
-a small test system input that has the same issue, but will take much
-time until it triggers the error condition.  Also, it will be easier to
-see what happens.
-
-.. _hint02:
-
-Visualize your trajectory
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To better understand what is causing problems, it is often very useful
-to visualize the system close to the point of failure.  It may be
-necessary to have LAMMPS output trajectory frames rather frequently.  To
-avoid gigantic files, you can use :doc:`dump_modify delay <dump_modify>`
-to delay output until the critical section is reached, and you can use a
-smaller test system (see above).
-
-.. _hint03:
-
-Parallel versus serial
-^^^^^^^^^^^^^^^^^^^^^^
-
-Issues where something is "lost" or "missing" often exhibit that issue
-only when running in parallel.  That doesn't mean there is no problem,
-only the symptoms are not triggering an error quickly.  Correspondingly,
-errors may be triggered faster with more processors and thus smaller
-sub-domains.
-
-.. _hint04:
-
-Segmentation Fault
-^^^^^^^^^^^^^^^^^^
-
-A segmentation fault is an error reported by the **operating system**
-and not LAMMPS itself.  It happens when a process tries to access a
-memory address that is not available.  This can have **many** reasons:
-memory has not been allocated, a memory buffer is not large enough, a
-memory address is computed from an incorrect index, a memory buffer is
-used after it has been freed, some general memory corruption.  When
-investigating a segmentation fault (aka segfault), it is important to
-determine which process is causing it; it may not always be LAMMPS.  For
-example, some MPI library implementations report a segmentation fault
-from their "mpirun" or "mpiexec" command when the application has been
-terminated unexpectedly.
-
-While a segmentation fault is likely an indication of a bug in LAMMPS,
-it need not always be; it can also be the consequence of too aggressive
-simulation settings.  For time critical code paths, LAMMPS will assume
-the user has chosen the settings carefully and will not make any checks
-to avoid to avoid performance penalties.
-
-A crucial step in resolving a segmentation fault is to identify the
-exact location in the code where it happens.  Please see `Errors_debug`
-for a couple of examples showing how to do this on a Linux machine.
-With this information -- a simple way to reproduce the segmentation
-fault and the exact :doc:`LAMMPS version <Manual_version>` and platform
-you are running on -- you can contact the LAMMPS developers or post in
-the LAMMPS forum to get assistance.
-
-.. _hint05:
-
-Fast moving atoms
-^^^^^^^^^^^^^^^^^
-
-Fast moving atoms may be "lost" or "missing" when their velocity becomes
-so large that they can cross a sub-domain within one timestep.  This
-often happens when atoms are too close, but atoms may also "move" too
-fast from sub-domain to sub-domain if the box changes rapidly.
-E.g. when setting a large an initial box with :doc:`shrink-wrap boundary
-conditions <boundary>` that collapses on the first step (in this case
-the solution is often using 'm' instead of 's' as a boundary condition).
-
-To reduce the impact of "close contacts", one can remove those atoms or
-molecules with something like :doc:`delete_atoms overlap 0.1 all all
-<delete_atoms>`.  With periodic boundaries, a close contact pair of
-atoms may be on opposite sides of the simulation box.  Another option
-would be to first run a minimization (aka quench) before starting
-the MD.  Reducing the time step can also help.  Many times, one just
-needs to "ease" the system into a balanced state and can then switch to
-more aggressive settings.
-
-The speed of atoms during an MD run depends on the steepness of the
-potential function and their mass.  Since the positions and velocities
-of atoms are computed with finite timesteps, the timestep needs to be
-small enough for stable numeric integration of the trajectory.  If the
-timestep is too large during initialization (or other instances of
-extreme dynamics), using :doc:`fix nve/limit <fix_nve_limit>` or
-:doc:`fix dt/reset <fix_dt_reset>` temporarily can help to avoid too
-large updates or adapt the timestep according to the displacements.
-
-.. _hint06:
-
-Ignoring lost atoms
-^^^^^^^^^^^^^^^^^^^
-
-It is tempting to use the :doc:`thermo_modify lost ignore
-<thermo_modify>` to avoid LAMMPS aborting with an error on lost atoms.
-This setting should, however, *only* be used when atoms *should* leave
-the system.  In general, ignoring a problem does not solve it.
-
-.. _hint07:
-
-Pressure, forces, positions becoming NaN or Inf
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Some potentials can overflow or have a division by zero with close
-contacts or bad geometries (for the given force styles in use) leading
-to forces that can no longer be represented as numbers.  Those will show
-as "NaN" or "Inf".  On most machines, the program will continue, but
-there is no way to recover from it and those NaN or Inf values will
-propagate.  So-called :doc:`"soft-core" potentials <pair_fep_soft>` or
-the :doc:`"soft" repulsive-only pair style <pair_soft>` are less prone
-for this behavior (depending on the settings in use) and can be used at
-the beginning of a simulation.  Also, single precision numbers can
-overflow much faster, so for the GPU or INTEL package it may be
-beneficial to run with double precision initially before switching to
-mixed or single precision for faster execution when the system has
-relaxed.
-
-.. _hint08:
-
-Communication cutoff
-^^^^^^^^^^^^^^^^^^^^
-
-The communication cutoff determines the "overlap" between sub-domains
-and atoms in these regions are referred to in LAMMPS as "ghost atoms".
-This region has to be large enough to contain all atoms of a bond,
-angle, dihedral, or improper with just one atom in the actual
-sub-domain.  Typically, this cutoff is set to the largest cutoff from
-the :doc:`pair style(s) <pair_style>` plus the :doc:`neighbor list skin
-distance <neighbor>` and will typically be sufficient for all bonded
-interactions.  But if the pair style cutoff is small, this may not be
-enough.  LAMMPS will print a warning in this case using some heuristic
-based on the equilibrium bond length, but that still may not be
-sufficient for cases where the force constants are small and thus bonds
-may be stretched very far.  The communication cutoff can be adjusted
-with :doc:`comm_modify cutoff \<value\> <comm_modify>`, but setting this
-too large will waste CPU time and memory.
-
-.. _hint09:
-
-Neighbor list settings
-^^^^^^^^^^^^^^^^^^^^^^
-
-Every time LAMMPS rebuilds the neighbor lists, LAMMPS will also check
-for "lost" or "missing" atoms.  Thus it can help to use very
-conservative :doc:`neighbor list settings <neigh_modify>` and then
-examine the neighbor list statistics if the neighbor list rebuild can be
-safely delayed.  Rebuilding the neighbor list less frequently
-(i.e. through increasing the *delay* or *every*) setting has diminishing
-returns and increasing risks.
-
-.. _hint10:
-
-Units
-^^^^^
-
-A frequent cause for a variety of problems is due to using the wrong
-:doc:`units <units>` settings for a particular potentials, especially
-when reading them from a potential file.  Most of the (example)
-potentials bundled with LAMMPS have a "UNITS:" tag that allows LAMMPS to
-check of the units are consistent with what is intended, but potential
-files from publications or potential parameter databases may lack this
-metadata information and thus will not error out or warn when using the
-wrong setting.  Most potential files usually use "metal" units, but some
-are parameterized for other settings, most notably :doc:`ReaxFF
-potentials <pair_reaxff>` that use "real" units.
-
-Also, individual parameters for :doc:`pair_coeff <pair_coeff>` commands
-taken from publications or other MD software may need to be converted
-and sometimes in unexpected ways.  Thus some careful checking is
-recommended.
-
-.. _hint11:
-
-No error message printed
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-In some cases -- especially when running in parallel with MPI -- LAMMPS
-may stop without displaying an error.  But the fact that nothing was
-displayed does not mean there was not an error message. Instead it is
-highly likely that the message was written to a buffer and LAMMPS was
-aborted before the buffer was output.  Usually, output buffers are
-output for every line of output, but sometimes this is delayed until
-4096 or 8192 bytes of output have been accumulated.  This buffering for
-screen and logfile output can be disabled by using the :ref:`-nb
-or -nonbuf <nonbuf>` command-line flag.  This is most often needed when
-debugging crashing multi-replica calculations.
-
-.. _hint12:
-
-Errors before or after the simulation box is created
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-As critical step in a LAMMPS input is when the simulation box is
-defined, either with a :doc:`create_box command <create_box>`, a
-:doc:`read_data command <read_data>`, or a :doc:`read_restart command
-<read_restart>`.  After this step, certain settings are locked in (e.g.
-units, or number of atom, bond, angle, dihedral, improper types) and
-cannot be changed after that.  Consequently, commands that change such
-settings (e.g. :doc:`units <units>`) are only allowed before the box is
-defined.  Very few commands can be used before and after, like
-:doc:`pair_style <pair_style>` (but not :doc:`pair_coeff <pair_coeff>`).
-Most LAMMPS commands must be used after the simulation box is created.
-
-Consequently, LAMMPS will stop with an error, if a command is used in
-the wrong place.  This is not always obvious.  So index or string style
-:doc:`variables <variable>` can be expanded anywhere in the input, but
-equal style (or similar) variables can only be expanded before the box
-is defined if they do not reference anything that cannot be defined
-before the box (e.g. a compute or fix reference or a thermo keyword).
-
-------
+Many errors or warnings are self-explanatory and thus straightforward to
+resolve.  However, there are also cases, where there is no single cause
+and explanation, where LAMMPS can only detect symptoms of an error but
+not the exact cause, or where the explanation needs to be more detailed than
+what can be fit into a message printed by the program.  The following are
+discussions of such cases.
 
 .. _err0001:
 
@@ -257,20 +23,19 @@ The header section informs LAMMPS how many entries or lines are expected
 in the various sections (like Atoms, Masses, Pair Coeffs, *etc.*\ ) of
 the data file.  If there is a mismatch, LAMMPS will either keep reading
 beyond the end of a section or stop reading before the section has
-ended.  In that case the next line will not contain a recognized
-keyword.
+ended.  In that case the next line will not contain a recognized keyword.
 
-Such a mismatch can also happen when the first line of the data is *not*
-a comment as required by the format, but a line with a valid header
-keyword.  That would result in LAMMPS expecting, for instance, 0 atoms
-because the "atoms" header line is the first line and thus treated as a
-comment.
+Such a mismatch can also happen when the first line of the data
+is *not* a comment as required by the format, but a line with a valid
+header keyword.  That would result in LAMMPS expecting, for instance,
+0 atoms because the "atoms" header line is the first line and thus
+treated as a comment.
 
 Another possibility to trigger this error is to have a keyword in the
 data file that corresponds to a fix (e.g. :doc:`fix cmap <fix_cmap>`)
 but the :doc:`read_data <read_data>` command is missing the (optional)
-arguments that identify the fix and its header and section keywords.
-Alternatively, those arguments are inconsistent with the keywords in the
+arguments that identify the fix and the header keyword and section
+keyword or those arguments are inconsistent with the keywords in the
 data file.
 
 .. _err0002:
@@ -280,705 +45,12 @@ Incorrect format in ... section of data file
 
 This error happens when LAMMPS reads the contents of a section of a
 :doc:`data file <read_data>` and the number of parameters in the line
-differs from what is expected.  This most commonly happens when the atom
-style is different from what is expected for a specific data file since
-changing the atom style usually changes the format of the line.
+differs from what is expected.  This most commonly happens, when the
+atom style is different from what is expected for a specific data file
+since changing the atom style usually changes the format of the line.
 
-This error can also occur when the number of entries indicated in the
+This error can also happen when the number of entries indicated in the
 header of a data file (e.g. the number of atoms) is larger than the
 number of lines provided (e.g. in the corresponding Atoms section)
-causing LAMMPS to continue reading into the next section which has a
-completely different format.
-
-.. _err0003:
-
-Illegal variable command: expected X arguments but found Y
-----------------------------------------------------------
-
-This error indicates that a variable command has the wrong number of
-arguments.  A common reason for this is that the variable expression has
-whitespace, but is not enclosed in single or double quotes.
-
-To explain, the LAMMPS input parser reads and processes lines.  The
-resulting line is broken down into "words".  Those are usually
-individual commands, labels, names, and values separated by whitespace
-(a space or tab character).  For "words" that may contain whitespace,
-they have to be enclosed in single (') or double (") quotes.  The parser
-will then remove the outermost pair of quotes and pass that string as
-"word" to the variable command.
-
-Thus missing quotes or accidental extra whitespace will trigger this
-error because the unquoted whitespace will result in the text being
-broken into more "words", i.e. the variable expression being split.
-
-.. _err0004:
-
-Out of range atoms - cannot compute ...
----------------------------------------
-
-The PPPM (and also PPPMDisp and MSM) methods need to assemble a grid of
-electron density data derived from the (partial) charges assigned to the
-atoms.  These charges are smeared out across multiple grid points (see
-:doc:`kspace_modify order <kspace_modify>`).  When running in parallel
-with MPI, LAMMPS uses a :doc:`domain decomposition scheme
-<Developer_par_part>` where each processor manages a subset of atoms and
-thus also a grid representing the density.  The processor's grid covers
-the actual volume of the sub-domain and some extra space corresponding
-to the :doc:`neighbor list skin <neighbor>`.  These are then
-:doc:`combined and redistributed <Developer_par_long>` for parallel
-processing of the long-range component of the Coulomb interaction.
-
-The ``Out of range atoms`` error can happen when atoms move too fast,
-the neighbor list skin is too small, or the neighbor lists are not
-updated frequently enough.  The smeared charges cannot then be fully
-assigned to the density grid for all atoms.  LAMMPS checks for this
-condition and stops with an error.  Most of the time, this is an
-indication of a system with very high forces, often at the beginning of
-a simulation or when boundary conditions are changed.  The error becomes
-more likely with more MPI processes.
-
-There are multiple options to explore for avoiding the error.  The best
-choice depends strongly on the individual system, and often a
-combination of changes is required.  For example, more conservative MD
-parameter settings can be used (larger neighbor skin, shorter time step,
-more frequent neighbor list updates).  Sometimes, it helps to revisit
-the system generation and avoid close contacts when building it.
-Otherwise one can use the :doc:`delete_atoms overlap<delete_atoms>`
-command to delete those close contact atoms or run a minimization before
-the MD.  It can also help to temporarily use a cutoff-Coulomb pair style
-and no kspace style until the system has somewhat equilibrated and then
-switch to the long-range solver.
-
-.. _err0005:
-
-Bond (or angle, dihedral, improper, cmap, or shake) atoms missing
------------------------------------------------------------------
-
-The second atom needed to compute a particular bond (or the third or
-fourth atom for angle, dihedral, or improper) is missing on the
-indicated timestep and processor.  Typically, this is because the two
-bonded atoms have become too far apart relative to the communication
-cutoff distance for ghost atoms.  By default, the communication cutoff
-is set by the pair cutoff.  However, to accommodate larger distances
-between topologically connected atoms, it can be manually adjusted using
-:doc:`comm_modify <comm_modify>` at the cost of increased communication
-and more ghost atoms.  However, missing bond atoms may also indicate
-that there are unstable dynamics which caused the atoms to blow apart.
-In this scenario, increasing the communication distance will not solve
-the underlying issue.  Rather, see :ref:`Fast moving atoms <hint05>` and
-:ref:`Neighbor list settings <hint09>` in the general troubleshooting
-section above for ideas to fix unstable dynamics.
-
-If atoms are intended to be lost during a simulation (e.g. due to open
-boundary conditions or :doc:`fix evaporate <fix_evaporate>`) such that
-two bonded atoms may be lost at different times from each other, this
-error can be converted to a warning or turned off using the *lost/bond*
-keyword in the :doc:`thermo_modify <thermo_modify>` command.
-
-.. _err0006:
-
-Non-numeric atom coords or pressure or box dimensions - simulation unstable
----------------------------------------------------------------------------
-
-This error usually occurs due to overly aggressive simulation settings
-or issues with the system geometry or the potential.  See
-:ref:`Pressure, forces, positions becoming NaN or Inf <hint07>` above in
-the general troubleshooting section.  This error is more likely to
-happen during equilibration, so it can help to do a minimization before
-or even add a second or third minimization after running a few
-equilibration MD steps.  It also is more likely when directly using a
-Nose-Hoover (or other) barostat, and thus it may be advisable to run
-with only a thermostat for a bit until the potential energy has
-stabilized.
-
-.. _err007:
-
-Fix used in ... not computed at compatible time
------------------------------------------------
-
-Many fix styles are invoked only every *nevery* timesteps, which means
-their data is only valid on those steps.  When data from a fix is used
-as input for a compute, a dump, another fix, or thermo output, it must
-read that data at timesteps when the fix in question was invoked, i.e.
-on timesteps that are multiples of its *nevery* setting.  If this is not
-the case, LAMMPS will stop with an error.  To remedy this, it may be
-required to change the output frequency or the *nevery* setting of the
-fix.
-
-.. _err0008:
-
-Lost atoms ...
---------------
-
-A simulation stopping with an error due to lost atoms can have multiple
-causes.  By default, LAMMPS checks for whether the total number of atoms
-is consistent with the sum of atoms "owned" by MPI processors every time
-that thermodynamic output is written.  In the majority of cases, lost
-atoms are unexpected and a result of extremely high velocities causing
-instabilities in the system.  Such velocities can result from a variety
-of issues.  For ideas on how to track down issues with unexpected lost
-atoms, see :ref:`Fast moving atoms <hint05>` and :ref:`Neighbor list
-settings <hint09>` in the general troubleshooting section above.  In
-specific situations however, losing atoms is expected material behavior
-(e.g. with sputtering and surface evaporation simulations), and an
-unwanted crash can be avoided by changing the :doc:`thermo_modify lost
-<thermo_modify>` keyword from the default 'error' to 'warn' or 'ignore'
-(though heed the advice in :ref:`Ignoring lost atoms <hint06>` above!).
-
-.. _err0009:
-
-Too many neighbor bins
-----------------------
-
-The simulation box is or has become too large relative to the size of a
-neighbor bin (which in turn depends on the largest pair-wise cutoff by
-default) such that LAMMPS is unable to store the needed number of bins.
-This typically implies the simulation box has expanded too far.  That
-can occur when some atoms move rapidly apart with shrink-wrap boundaries
-or when a fix (like fix deform or a barostat) excessively grows the
-simulation box.  This can also happen if the largest pair-wise cutoff is
-small.  In this case, the error can be avoided by using the
-:doc:`neigh_modify command <neigh_modify>` to set the bin width to a
-suitably large value.
-
-.. _err0010:
-
-Unrecognized ... style ... is part of ... package which is not enabled in this LAMMPS binary
---------------------------------------------------------------------------------------------
-
-The LAMMPS executable (binary) being used was not compiled with a
-package containing the specified style.  This indicates that the
-executable needs to be re-built after enabling the correct package in
-the relevant Makefile or CMake build directory.  See
-:doc:`Section 3. Build LAMMPS <Build>` for more details.  One can check
-if the expected package and pair style is present in the executable by
-running it with the ``-help`` (or ``-h``) flag on the command line.  One
-common oversight, especially for beginner LAMMPS users, is enabling the
-package but forgetting to run commands to rebuild (e.g., to run the
-final ``make`` or ``cmake`` command).
-
-If this error occurs with an executable that the user does not control
-(e.g., through a module on HPC clusters), the user will need to get in
-contact with the relevant person or people who can update the
-executable.
-
-.. _err011:
-
-Energy or stress was not tallied by pair style
-----------------------------------------------
-
-This warning can be printed by computes from the :ref:`TALLY package
-<PKG-TALLY>`.  Those use a callback mechanism that only work for regular
-pair-wise additive pair styles like :doc:`Lennard-Jones <pair_lj>`,
-:doc:`Morse <pair_morse>`, :doc:`Born-Meyer-Huggins <pair_born>`, and
-similar.  Such required callbacks have not been implemented for
-many-body potentials so one would have to implement them to add
-compatibility with these computes (which may be difficult to do in a
-generic fashion).  Whether this warning indicates that contributions to
-the computed properties are missing depends on the groups used.  At any
-rate, careful testing of the results is advised when this warning
-appears.
-
-.. _err0012:
-
-fmt::format_error
------------------
-
-LAMMPS uses the `{fmt} library <https://fmt.dev>`_ for advanced string
-formatting tasks.  This is similar to the ``printf()`` family of
-functions from the standard C library, but more flexible.  If there is a
-bug in the LAMMPS code and the format string does not match the list of
-arguments or has some other error, this error message will be shown.
-You should contact the LAMMPS developers and report the bug as a `GitHub
-Bug Report Issue <https://github.com/lammps/lammps/issues>`_ along with
-sufficient information to easily reproduce it.
-
-
-.. _err0013:
-
-Substitution for illegal variable
----------------------------------
-
-A variable in an input script or a variable expression was not found in
-the list of valid variables.  The most common reason for this is a typo
-somewhere in the input file such that the expression uses an invalid
-variable name.  The second most common reason is omitting the curly
-braces for a direct variable with a name that is not a single letter.
-For example:
-
-.. code-block:: LAMMPS
-
-   variable cutoff index 10.0
-   pair_style lj/cut ${cutoff}  # this is correct
-   pair_style lj/cut $cutoff    # this is incorrect, LAMMPS looks for 'c' instead of 'cutoff'
-   variable c      index 5.0    # if $c is defined, LAMMPS subsitutes only '$c' and reads: 5utoff
-
-Another potential source of this error may be invalid command line
-variables (-var or -v argument) used when launching LAMMPS from an
-interactive shell or shell scripts.  An uncommon source for this error
-is using the :doc:`next command <next>` to advance through a list of
-values provided by an index style variable.  If there is no remaining
-element in the list, LAMMPS will delete the variable and any following
-expansion or reference attempt will trigger the error.
-
-Users with harder-to-track variable errors might also find reading the
-:doc:`Parsing rules for input scripts <Commands_parse>` helpful.
-
-.. _err0014:
-
-Bond atom missing in image check or box size check
---------------------------------------------------
-
-This can be either an error or a warning depending on your
-:doc:`thermo_modify settings <thermo_modify>`.  It is flagged in a part
-of the LAMMPS code where it updates the domain decomposition and before
-it builds the neighbor lists.  It checks that both atoms of a bond are
-within the communication cutoff of a subdomain.  It is usually caused by
-atoms moving too fast (see the :ref:`paragraph on fast moving atoms
-<hint05>`), or by the :doc:`communication cutoff being too small
-<comm_modify>`, or by waiting too long between :doc:`sub-domain and
-neighbor list updates <neigh_modify>`.
-
-.. _err0015:
-
-Cannot use neighbor bins - box size \<\< cutoff
------------------------------------------------
-
-LAMMPS is unable to build neighbor bins since the size of the box is
-much smaller than an interaction cutoff in at least one of its
-dimensions.  Typically, this error is triggered when the simulation box
-has one very thin dimension. If a cubic neighbor bin had to fit exactly
-within the thin dimension, then an inordinate amount of bins would be
-created to fill space.  This error can be avoided using the generally
-slower :doc:`nsq neighbor style <neighbor>` or by increasing the size of
-the smallest box lengths.
-
-.. _err0016:
-
-Did not assign all atoms correctly
-----------------------------------
-
-This error happens most commonly when :doc:`reading a data file
-<read_data>` under :doc:`non-periodic boundary conditions<boundary>`.
-Only atoms with positions **inside** the simulation box will be read and
-thus any atoms outside the box will be skipped and the total atom count
-will not match, which triggers the error.  This does not happen with
-periodic boundary conditions where atoms outside the principal box will
-be "wrapped" into the principal box and their image flags set
-accordingly.
-
-Similar errors can happen with the :doc:`replicate command<replicate>`
-or the :doc:`read_restart command<read_restart>`.  In these cases the
-cause may be a problematic geometry, an insufficient communication
-cutoff, or a bug in the LAMMPS source code.  In these cases it is
-advisable to set up :ref:`small test case <hint01>` for testing and
-debugging.  This will be required in case you need to get help from a
-LAMMPS developer.
-
-.. _err0017:
-
-Domain too large for neighbor bins
-----------------------------------
-
-The domain has become extremely large so that neighbor bins cannot be
-used.  Too many neighbor bins would need to be created to fill space.
-Most likely, one or more atoms have been blown a great distance out of
-the simulation box or a fix (like fix deform or a barostat) has
-excessively grown the simulation box.
-
-.. _err0018:
-
-Step X: (h)bondchk failed
--------------------------
-
-This error is a consequence of the heuristic memory allocations for
-buffers of the regular ReaxFF version.  In ReaxFF simulations, the lists
-of bonds and hydrogen bonds can change due to chemical reactions.  The
-default approach, however, assumes that these changes are not very
-large, so it allocates buffers for the current system setup plus a
-safety margin.  This can be adjusted with the :doc:`safezone, mincap,
-and minhbonds settings of the pair style <pair_reaxff>`, but only to
-some extent.  When equilibrating a new system, or simulating a sparse
-system in parallel, this can be difficult to control and become
-wasteful.  A simple workaround is often to break a simulation down in
-multiple chunks.  A better approach, however, is to compile and use the
-KOKKOS package version of ReaxFF (you do not need a GPU for that, but
-can also compile it in serial or OpenMP mode), which uses a more robust
-memory allocation approach.
-
-.. _err0019:
-
-Numeric index X is out of bounds
---------------------------------
-
-This error most commonly happens when setting force field coefficients
-with either the :doc:`pair_coeff <pair_coeff>`, the :doc:`bond_coeff
-<bond_coeff>`, the :doc:`angle_coeff <angle_coeff>`, the
-:doc:`dihedral_coeff <dihedral_coeff>`, or the :doc:`improper_coeff
-<improper_coeff>` command.  These commands accept type labels, explicit
-numbers, and wildcards for ranges of numbers.  If the numeric value of
-any of these is outside the valid range (defined by the number of
-corresponding types), LAMMPS will stop with this error.  A few other
-commands and styles also allow ranges of numbers and check using the
-same method and thus print the same kind of error.
-
-The cause is almost always a typo in the input or a logic error when
-defining the values or ranges.  So one needs to carefully review the
-input.  Along with the error, LAMMPS will print the valid range as a
-hint.
-
-.. _err0020:
-
-Compute, fix, or variable vector or array is accessed out-of-range
-------------------------------------------------------------------
-
-When accessing an individual element of a global vector or array or a
-per-atom vector or array provided by a compute or fix or atom-style or
-vector-style variable or data from a specific atom, an index in square
-brackets ("[ ]") (or two indices) must be provided to determine which
-element to access and it must be in a valid range or else LAMMPS would
-access invalid data or crash with a segmentation fault.  In the two most
-common cases, where this data is accessed, :doc:`variable expressions
-<variable>` and :doc:`thermodynamic output <thermo_style>`, LAMMPS will
-check for valid indices and stop with an error otherwise.
-
-While LAMMPS is written in C++ (which uses 0 based indexing) these
-indices start at 1 (i.e. similar to Fortran).  Any index smaller than 1
-or larger than the maximum allowed value should trigger this error.
-Since this kind of error frequently happens with rather complex
-expressions, it is recommended to test these with small test systems,
-where the values can be tracked with output files for all relevant
-properties at every step.
-
-.. _err0021:
-
-Incorrect args for pair coefficients (also bond/angle/dihedral/improper coefficients)
--------------------------------------------------------------------------------------
-
-The parameters in the :doc:`pair_coeff <pair_coeff>` command for a
-specified :doc:`pair_style <pair_style>` have a missing or erroneous
-argument.  The same applies when seeing this error for :doc:`bond_coeff
-<bond_coeff>`, :doc:`angle_coeff <angle_coeff>`, :doc:`dihedral_coeff
-<dihedral_coeff>`, or :doc:`improper_coeff <improper_coeff>` and their
-respective style commands when using the MOLECULE or EXTRA-MOLECULE
-packages.  The cases below describe some ways to approach pair
-coefficient errors, but the same strategies apply to bonded systems as
-well.
-
-Outside of normal typos, this error can have several sources.  In all
-cases, the first step is to compare the command arguments to the
-expected format found in the corresponding :doc:`pair_style
-<pair_style>` page.  This can reveal cases where, for example, a pair
-style was changed, but the pair coefficients were not updated.  This can
-happen especially with pair style variants such as :doc:`pair_style eam
-<pair_eam>` vs. :doc:`pair_style eam/alloy <pair_style>` that look very
-similar but accept different parameters (the latter 'eam/alloy' variant
-takes element type names while 'eam' does not).
-
-Another common source of coefficient errors is when using multiple pair
-styles with commands such as :doc:`pair_style hybrid <pair_hybrid>`.
-Using hybrid pair styles requires adding an extra "label" argument in
-the coefficient commands that designates which pair style the command
-line refers to.  Moreover, if the same pair style is used multiple
-times, this label must be followed by an additional numeric argument.
-Also, different pair styles may require different arguments.
-
-This error message might also require a close look at other LAMMPS input
-files that are read in by the input script, such as data files or
-restart files.
-
-.. _err0022:
-
-Energy was not tallied on needed timestep (also virial, per-atom energy, per-atom virial)
------------------------------------------------------------------------------------------
-
-This error is generated when LAMMPS attempts to access an out-of-date or
-non-existent energy, pressure, or virial.  For efficiency reasons,
-LAMMPS does *not* calculate these quantities when the forces are
-calculated on every timestep or iteration.  Global quantities are only
-calculated when they are needed for :doc:`thermo <thermo_style>` output
-(at the beginning, end, and at regular intervals specified by the
-:doc:`thermo <thermo>` command).  Similarly, per-atom quantities are
-only calculated if they are needed to write per-atom energy or virial to
-a dump file.  This system works fine for simple input scripts.  However,
-the many user-specified `variable`, `fix`, and `compute` commands that
-LAMMPS provides make it difficult to anticipate when a quantity will be
-requested.  In some use cases, LAMMPS will figure out that a quantity is
-needed and arrange for it to be calculated on that timestep e.g. if it
-is requested by :doc:`fix ave/time <fix_ave_time>` or similar commands.
-If that fails, it can be detected by a mismatch between the current
-timestep and when a quantity was last calculated, in which case an error
-message of this type is generated.
-
-The most common cause of this type of error is requesting a quantity
-before the start of the simulation.
-
-.. code-block:: LAMMPS
-
-   # run 0 post no               # this will fix the error
-   variable e equal pe           # requesting energy compute
-   print "Potential energy = $e" # this will generate the error
-   run 1000                      # start of simulation
-
-This situation can be avoided by adding in a "run 0" command, as
-explained in more detail in the "Variable Accuracy" section of the
-:doc:`variable <variable>` doc page.
-
-Another cause is requesting a quantity on a timestep that is not a
-thermo or dump output timestep.  This can often be remedied by
-increasing the frequency of thermo or dump output.
-
-.. _err0023:
-
-Molecule auto special bond generation overflow
-----------------------------------------------
-
-In order to correctly apply the :doc:`special_bonds <special_bonds>`
-settings (also known as "exclusions"), LAMMPS needs to maintain for each
-atom a list of atoms that are connected to this atom, either directly
-with a bond or indirectly through bonding with an intermediate atom(s).
-The purpose is to either remove or tag those pairs of atoms in the
-neighbor list.  This information is stored with individual atoms and
-thus the maximum number of such "special" neighbors is set when the
-simulation box is created.  When reading (relative) geometry and
-topology of a 'molecule' from a :doc:`molecule file <molecule>`, LAMMPS
-will build the list of such "special" neighbors for the molecule atom
-(if not given in the molecule file explicitly).  The error is triggered
-when the resulting list is too long for the space reserved when creating
-the simulation box.  The solution is to increase the corresponding
-setting.  Overestimating this value will only consume more memory, and
-is thus a safe choice.
-
-.. _err0024:
-
-Molecule topology/atom exceeds system topology/atom
----------------------------------------------------
-
-LAMMPS uses :doc:`domain decomposition <Developer_par_part>` to
-distribute data (i.e. atoms) across the MPI processes in parallel runs.
-This includes topology data about bonds, angles, dihedrals, impropers
-and :doc:`"special" neighbors <special_bonds>`.  This information is
-stored with either one or all atoms involved in such a topology entry
-(which of the two option applies depends on the :doc:`newton <newton>`
-setting for bonds).  When reading a data file, LAMMPS analyzes the
-requirements for this file and then the values are "locked in" and
-cannot be extended.
-
-So loading a molecule file that requires more of the topology per atom
-storage or adding a data file with such needs will lead to an error.  To
-avoid the error, one or more of the `extra/XXX/per/atom` keywords are
-required to extend the corresponding storage.  It is no problem to
-choose those numbers generously and have more storage reserved than
-actually needed, but having these numbers set too small will lead to an
-error.
-
-.. _err0025:
-
-Molecule topology type exceeds system topology type
----------------------------------------------------
-
-The total number of atom, bond, angle, dihedral, and improper types is
-"locked in" when LAMMPS creates the simulation box.  This can happen
-through either the :doc:`create_box <create_box>`, the :doc:`read_data
-<read_data>`, or the :doc:`read_restart <read_restart>` command.  After
-this it is not possible to refer to an additional type.  So loading a
-molecule file that uses additional types or adding a data file that
-would require additional types will lead to an error.  To avoid the
-error, one or more of the `extra/XXX/types` keywords are required to
-extend the maximum number of the individual types.
-
-.. _err0026:
-
-Molecule attributes do not match system attributes
---------------------------------------------------
-
-Choosing an :doc:`atom_style <atom_style>` in LAMMPS determines which
-per-atom properties are available.  In a :doc:`molecule file
-<molecule>`, however, it is possible to add sections (for example Masses
-or Charges) that are not supported by the atom style.  Masses for
-example, are usually not a per-atom property, but defined through the
-atom type.  Thus it would not be required to have a Masses section and
-the included data would be ignored.  LAMMPS prints this warning to
-inform about this case.
-
-.. _err0027:
-
-Inconsistent image flags
-------------------------
-
-This warning happens when the distance between the *unwrapped* x-, y-,
-or z-components of the coordinates of a bond is larger than half the box
-with periodic boundaries or larger than the box with non-periodic
-boundaries.  It means that the positions and image flags have become
-inconsistent.  LAMMPS will still compute bonded interactions based on
-the closest periodic images of the atoms and thus in most cases the
-results will be correct.  However they can cause problems when such
-atoms are used with the fix rigid or replicate commands.  Thus, it is
-good practice to update the system so that the message does not appear.
-It will help with future manipulations of the system.
-
-There is one case where this warning *must* appear: when you have a
-chain of connected bonds that pass through the entire box and connect
-back to the first atom in the chain through periodic boundaries,
-i.e. some kind of "infinite polymer".  In that case, the bond image
-flags *must* be inconsistent for the one bond that reaches back to the
-beginning of the chain.
-
-
-.. _err0028:
-
-No fixes with time integration, atoms won't move
-------------------------------------------------
-
-This warning will be issued if LAMMPS encounters a :doc:`run <run>`
-command that does not have a preceding :doc:`fix <fix>` command that
-updates atom/object positions and velocities per step.  In other words,
-there are no fixes detected that perform velocity-Verlet time
-integration, such as :doc:`fix nve <fix_nve>`.  Note that this alert
-does not mean that there are no active fixes.  LAMMPS has a very wide
-variety of fixes, many of which do not move objects but also operate
-through steps, such as printing outputs (e.g. :doc:`fix print
-<fix_print>`), performing calculations (e.g. :doc:`fix ave/time
-<fix_ave_time>`), or changing other system parameters (e.g. :doc:`fix
-dt/reset <fix_dt_reset>`).  It is up to the user to determine whether
-the lack of a time-integrating fix is intentional or not.
-
-
-.. _err0029:
-
-System is not charge neutral, net charge = ...
-----------------------------------------------
-
-the sum of charges in the system is not zero.  When a system is not
-charge-neutral, methods that evolve/manipulate per-atom charges,
-evaluate Coulomb interactions, evaluate Coulomb forces, or
-evaluate/manipulate other properties relying on per-atom charges may
-raise this warning.  A non-zero net charge most commonly arises after
-setting per-atom charges :doc:`set <set>` such that the sum is non-zero
-or by reading in a system through :doc:`read_data <read_data>` where the
-per-atom charges do not sum to zero.  However, a loss of charge
-neutrality may occur in other less common ways, like when charge
-equilibration methods (e.g., :doc:`fix qeq <fix_qeq>`) fail.
-
-A similar warning/error may be raised when using certain charge
-equilibration methods: :doc:`fix qeq <fix_qeq>`, :doc:`fix qeq/comb
-<fix_qeq_comb>`, :doc:`fix qeq/reaxff <fix_qeq_reaxff>`, and :doc:`fix
-qtpie/reaxff <fix_qtpie_reaxff>`.  In such cases, this warning/error
-will be raised for the fix :doc:`group <group>` when the group has a
-non-zero net charge.
-
-When the system is expected to be charge-neutral, this warning often
-arises due to an error in the lammps input (e.g., an incorrect :doc:`set
-<set>` command, error in the data file read by :doc:`read_data
-<read_data>`, incorrectly grouping atoms with charge, etc.).  If the
-system is NOT expected to be charge-neutral, the user should make sure
-that the method(s) used are appropriate for systems with a non-zero net
-charge.  Some commonly used fixes for charge equilibration :doc:`fix qeq
-<fix_qeq>`, pair styles that include charge interactions
-:doc:`pair_style coul/XXX <pair_coul>`, and kspace methods
-:doc:`kspace_style <kspace_style>` can, in theory, support systems with
-non-zero net charge.  However, non-zero net charge can lead to spurious
-artifacts.  The severity of these artifacts depends on the magnitude of
-total charge, system size, and methods used.  Before running simulations
-or calculations for systems with non-zero net charge, users should test
-for artifacts and convergence of properties.
-
-.. _err0030:
-
-Variable evaluation before simulation box is defined
-----------------------------------------------------
-
-This error happens, when trying to expand or use an equal- or atom-style
-variable (or an equivalent style), where the expression contains a
-reference to something (e.g. a compute reference, a property of an atom,
-or a thermo keyword) that is not allowed to be used before the
-simulation box is defined.  See the paragraph on :ref:`errors before or
-after the simulation box is created <hint12>` for additional
-information.
-
-.. _err0031:
-
-Invalid thermo keyword 'X' in variable formula
-----------------------------------------------
-
-This error message is often misleading.  It is caused when evaluating a
-:doc:`variable command <variable>` expression and LAMMPS comes across a
-string that it does not recognize.  LAMMPS first checks if a string is a
-reference to a compute, fix, custom property, or another variable by
-looking at the first 2-3 characters (and if it is, it checks whether the
-referenced item exists).  Next LAMMPS checks if the string matches one
-of the available functions or constants.  If that fails, LAMMPS will
-assume that this string is a :doc:`thermo keyword <thermo_style>` and
-let the code for printing thermodynamic output return the corresponding
-value.  However, if this fails too, since the string is not a thermo
-keyword, LAMMPS stops with the 'Invalid thermo keyword' error.  But it
-is also possible, that there is just a typo in the name of a valid
-variable function.  Thus it is recommended to check the failing variable
-expression very carefully.
-
-.. _err0032:
-
-One or more atoms are time integrated more than once
-----------------------------------------------------
-
-This is probably an error since you typically do not want to advance the
-positions or velocities of an atom more than once per timestep.  This
-typically happens when there are multiple fix commands that advance atom
-positions with overlapping groups.  Also, for some fix styles it is not
-immediately obvious that they include time integration.  Please check
-the documentation carefully.
-
-.. _err0033:
-
-XXX command before simulation box is defined
---------------------------------------------
-
-This error occurs when trying to execute a LAMMPS command that requires
-information about the system dimensions, or the number atom, bond,
-angle, dihedral, or improper types, or the number of atoms or similar
-data that is only available *after* the simulation box has been created.
-See the paragraph on :ref:`errors before or after the simulation box is
-created <hint12>` for additional information.
-
-.. _err0034:
-
-XXX command after simulation box is defined
---------------------------------------------
-
-This error occurs when trying to execute a LAMMPS command that changes a
-global setting *after* it is locked in when the simulation box is
-created (for instance defining the :doc:`atom style <atom_style>`,
-:doc:`dimension <dimension>`, :doc:`newton <newton>`, or :doc:`units
-<units>` setting).  These settings may only be changed *before* the
-simulation box has been created.  See the paragraph on :ref:`errors
-before or after the simulation box is created <hint12>` for additional
-information.
-
-.. _err0035:
-
-Error messages ending in 'Please contact the LAMMPS developers'
----------------------------------------------------------------
-
-Such error messages indicate that something unexpected has happened and
-that it will require a good understanding of the details of the design
-of LAMMPS to resolve this.  This can be due to some bug in contributed
-code, and oversight when updating functionality, a feature that is
-scheduled to be removed or reaching a combination of flags and settings
-that should not be possible or similar.
-
-Even if you find a way to work around this error or warning, you should
-contact the LAMMPS developers and prepare a minimal set of inputs that
-can be used to reproduce this error or warning.  By providing the input,
-the LAMMPS developers can then assess whether additional action is
-needed and who else to contact about this, if needed.
-
-There are multiple ways to get into contact and report your issue. In
-order of preference there are:
-
-- Submit a bug report `issue in the LAMMPS GitHub
-  <https://github.com/lammps/lammps/issues>` repository
-- Post a message in the "LAMMPS Development" forum in the
-  `MatSci Community Discourse <https://matsci.org/c/lammps/lammps-development/42>`_
-- Send an email to ``developers@lammps.org``
-- Send an email to an :doc:`individual LAMMPS developer <Intro_authors>`
-  that you know and trust
+and then LAMMPS will continue reading into the next section and that
+would have a completely different format.

doc/src/Errors_warnings.rst

@@ -1,15 +1,11 @@
 Warning messages
 ================
 
-This is an alphabetic list of some of the WARNING messages LAMMPS prints
-out and the reason why.  If the explanation here is not sufficient, the
-documentation for the offending command may help.  This is a historic
-list and no longer updated.  Instead the LAMMPS developers are trying
-to provide more details right with the error message or link to a
-paragraph with :doc:`detailed explanations <Errors_details>`.
-
-Warning messages also list the source file and line number where the
-warning was generated.  For example, a message like this:
+This is an alphabetic list of the WARNING messages LAMMPS prints out
+and the reason why.  If the explanation here is not sufficient, the
+documentation for the offending command may help.  Warning messages
+also list the source file and line number where the warning was
+generated.  For example, a message like this:
 
 .. parsed-literal::
 
@@ -18,7 +14,7 @@ warning was generated.  For example, a message like this:
 means that line #187 in the file src/domain.cpp generated the error.
 Looking in the source code may help you figure out what went wrong.
 
-Please also see the page with :doc:`Error messages <Errors_messages>`
+Doc page with :doc:`ERROR messages <Errors_messages>`
 
 ----------
 
@@ -32,10 +28,16 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    cutoff is set too short or the angle has blown apart and an atom is
    too far away.
 
+*Angle style in data file differs from currently defined angle style*
+   Self-explanatory.
+
 *Angles are defined but no angle style is set*
    The topology contains angles, but there are no angle forces computed
    since there was no angle_style command.
 
+*Atom style in data file differs from currently defined atom style*
+   Self-explanatory.
+
 *Bond atom missing in box size check*
    The second atom needed to compute a particular bond is missing on this
    processor.  Typically this is because the pairwise cutoff is set too
@@ -51,6 +53,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    processor.  Typically this is because the pairwise cutoff is set too
    short or the bond has blown apart and an atom is too far away.
 
+*Bond style in data file differs from currently defined bond style*
+   Self-explanatory.
+
 *Bonds are defined but no bond style is set*
    The topology contains bonds, but there are no bond forces computed
    since there was no bond_style command.
@@ -63,6 +68,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    length, multiplying by the number of bonds in the interaction (e.g. 3
    for a dihedral) and adding a small amount of stretch.
 
+*Both groups in compute group/group have a net charge; the Kspace boundary correction to energy will be non-zero*
+   Self-explanatory.
+
 *Calling write_dump before a full system init.*
    The write_dump command is used before the system has been fully
    initialized as part of a 'run' or 'minimize' command. Not all dump
@@ -78,6 +86,18 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    This means the temperature associated with the rigid bodies may be
    incorrect on this timestep.
 
+*Cannot include log terms without 1/r terms; setting flagHI to 1*
+   Self-explanatory.
+
+*Cannot include log terms without 1/r terms; setting flagHI to 1.*
+   Self-explanatory.
+
+*Charges are set, but coulombic solver is not used*
+   Self-explanatory.
+
+*Charges did not converge at step %ld: %lg*
+   Self-explanatory.
+
 *Communication cutoff is 0.0. No ghost atoms will be generated. Atoms may get lost*
    The communication cutoff defaults to the maximum of what is inferred from
    pair and bond styles (will be zero, if none are defined) and what is specified
@@ -103,6 +123,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    is not changed automatically and the warning may be ignored depending
    on the specific system being simulated.
 
+*Communication cutoff is too small for SNAP micro load balancing, increased to %lf*
+   Self-explanatory.
+
 *Compute cna/atom cutoff may be too large to find ghost atom neighbors*
    The neighbor cutoff used may not encompass enough ghost atoms
    to perform this operation correctly.
@@ -135,6 +158,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    Conformation of the 4 listed dihedral atoms is extreme; you may want
    to check your simulation geometry.
 
+*Dihedral style in data file differs from currently defined dihedral style*
+   Self-explanatory.
+
 *Dihedrals are defined but no dihedral style is set*
    The topology contains dihedrals, but there are no dihedral forces computed
    since there was no dihedral_style command.
@@ -151,6 +177,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
 *Estimated error in splitting of dispersion coeffs is %g*
    Error is greater than 0.0001 percent.
 
+*Ewald/disp Newton solver failed, using old method to estimate g_ewald*
+   Self-explanatory. Choosing a different cutoff value may help.
+
 *FENE bond too long*
    A FENE bond has stretched dangerously far.  It's interaction strength
    will be truncated to attempt to prevent the bond from blowing up.
@@ -163,6 +192,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    A FENE bond has stretched dangerously far.  It's interaction strength
    will be truncated to attempt to prevent the bond from blowing up.
 
+*Fix halt condition for fix-id %s met on step %ld with value %g*
+   Self explanatory.
+
 *Fix SRD walls overlap but fix srd overlap not set*
    You likely want to set this in your input script.
 
@@ -206,12 +238,21 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
 *Fix property/atom mol or charge w/out ghost communication*
    A model typically needs these properties defined for ghost atoms.
 
+*Fix qeq CG convergence failed (%g) after %d iterations at %ld step*
+   Self-explanatory.
+
 *Fix qeq has non-zero lower Taper radius cutoff*
    Absolute value must be <= 0.01.
 
 *Fix qeq has very low Taper radius cutoff*
    Value should typically be >= 5.0.
 
+*Fix qeq/dynamic tolerance may be too small for damped dynamics*
+   Self-explanatory.
+
+*Fix qeq/fire tolerance may be too small for damped fires*
+   Self-explanatory.
+
 *Fix rattle should come after all other integration fixes*
    This fix is designed to work after all other integration fixes change
    atom positions.  Thus it should be the last integration fix specified.
@@ -244,6 +285,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    The user-specified force accuracy cannot be achieved unless the table
    feature is disabled by using 'pair_modify table 0'.
 
+*Geometric mixing assumed for 1/r\^6 coefficients*
+   Self-explanatory.
+
 *Group for fix_modify temp != fix group*
    The fix_modify command is specifying a temperature computation that
    computes a temperature on a different group of atoms than the fix
@@ -266,14 +310,46 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    Conformation of the 4 listed improper atoms is extreme; you may want
    to check your simulation geometry.
 
+*Improper style in data file differs from currently defined improper style*
+   Self-explanatory.
+
 *Impropers are defined but no improper style is set*
    The topology contains impropers, but there are no improper forces computed
    since there was no improper_style command.
 
+*Inconsistent image flags*
+   The image flags for a pair on bonded atoms appear to be inconsistent.
+   Inconsistent means that when the coordinates of the two atoms are
+   unwrapped using the image flags, the two atoms are far apart.
+   Specifically they are further apart than half a periodic box length.
+   Or they are more than a box length apart in a non-periodic dimension.
+   This is usually due to the initial data file not having correct image
+   flags for the two atoms in a bond that straddles a periodic boundary.
+   They should be different by 1 in that case.  This is a warning because
+   inconsistent image flags will not cause problems for dynamics or most
+   LAMMPS simulations.  However they can cause problems when such atoms
+   are used with the fix rigid or replicate commands.  Note that if you
+   have an infinite periodic crystal with bonds then it is impossible to
+   have fully consistent image flags, since some bonds will cross
+   periodic boundaries and connect two atoms with the same image
+   flag.
+
 *Increasing communication cutoff for GPU style*
    The pair style has increased the communication cutoff to be consistent with
    the communication cutoff requirements for this pair style when run on the GPU.
 
+*KIM Model does not provide 'energy'; Potential energy will be zero*
+   Self-explanatory.
+
+*KIM Model does not provide 'forces'; Forces will be zero*
+   Self-explanatory.
+
+*KIM Model does not provide 'particleEnergy'; energy per atom will be zero*
+   Self-explanatory.
+
+*KIM Model does not provide 'particleVirial'; virial per atom will be zero*
+   Self-explanatory.
+
 *Kspace_modify slab param < 2.0 may cause unphysical behavior*
    The kspace_modify slab parameter should be larger to ensure periodic
    grids padded with empty space do not overlap.
@@ -325,10 +401,20 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    box, or moved further than one processor's subdomain away before
    reneighboring.
 
+*MSM mesh too small, increasing to 2 points in each direction*
+   Self-explanatory.
+
 *Mismatch between velocity and compute groups*
    The temperature computation used by the velocity command will not be
    on the same group of atoms that velocities are being set for.
 
+*Mixing forced for lj coefficients*
+   Self-explanatory.
+
+*Molecule attributes do not match system attributes*
+   An attribute is specified (e.g. diameter, charge) that is
+   not defined for the specified atom style.
+
 *Molecule has bond topology but no special bond settings*
    This means the bonded atoms will not be excluded in pairwise
    interactions.
@@ -363,6 +449,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
 *More than one compute damage/atom*
    It is not efficient to use compute ke/atom more than once.
 
+*More than one compute dilatation/atom*
+   Self-explanatory.
+
 *More than one compute erotate/sphere/atom*
    It is not efficient to use compute erorate/sphere/atom more than once.
 
@@ -375,6 +464,24 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
 *More than one compute orientorder/atom*
    It is not efficient to use compute orientorder/atom more than once.
 
+*More than one compute plasticity/atom*
+   Self-explanatory.
+
+*More than one compute sna/atom*
+   Self-explanatory.
+
+*More than one compute sna/grid*
+   Self-explanatory.
+
+*More than one compute sna/grid/local*
+   Self-explanatory.
+
+*More than one compute snad/atom*
+   Self-explanatory.
+
+*More than one compute snav/atom*
+   Self-explanatory.
+
 *More than one fix poems*
    It is not efficient to use fix poems more than once.
 
@@ -450,12 +557,21 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
 *Pair COMB charge %.10f with force %.10f hit min barrier*
    Something is possibly wrong with your model.
 
+*Pair brownian needs newton pair on for momentum conservation*
+   Self-explanatory.
+
+*Pair dpd needs newton pair on for momentum conservation*
+   Self-explanatory.
+
 *Pair dsmc: num_of_collisions > number_of_A*
    Collision model in DSMC is breaking down.
 
 *Pair dsmc: num_of_collisions > number_of_B*
    Collision model in DSMC is breaking down.
 
+*Pair style in data file differs from currently defined pair style*
+   Self-explanatory.
+
 *Pair style restartinfo set but has no restart support*
    This pair style has a bug, where it does not support reading and
    writing information to a restart file, but does not set the member
@@ -565,6 +681,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    cluster specified by the fix shake command is numerically suspect.  LAMMPS
    will set it to 0.0 and continue.
 
+*Shell command '%s' failed with error '%s'*
+   Self-explanatory.
+
 *Shell command returned with non-zero status*
    This may indicate the shell command did not operate as expected.
 
@@ -575,9 +694,15 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    This will lead to invalid constraint forces in the SHAKE/RATTLE
    computation.
 
+*Simulations might be very slow because of large number of structure factors*
+   Self-explanatory.
+
 *Slab correction not needed for MSM*
    Slab correction is intended to be used with Ewald or PPPM and is not needed by MSM.
 
+*Specifying an 'subset' value of '0' is equivalent to no 'subset' keyword*
+   Self-explanatory.
+
 *System is not charge neutral, net charge = %g*
    The total charge on all atoms on the system is not 0.0.
    For some KSpace solvers this is only a warning.
@@ -609,6 +734,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    assumed to also be for all atoms.  Thus the pressure printed by thermo
    could be inaccurate.
 
+*The fix ave/spatial command has been replaced by the more flexible fix ave/chunk and compute chunk/atom commands -- fix ave/spatial will be removed in the summer of 2015*
+   Self-explanatory.
+
 *The minimizer does not re-orient dipoles when using fix efield*
    This means that only the atom coordinates will be minimized,
    not the orientation of the dipoles.
@@ -617,6 +745,9 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    More than the maximum # of neighbors was found multiple times.  This
    was unexpected.
 
+*Too many inner timesteps in fix ttm*
+   Self-explanatory.
+
 *Too many neighbors in CNA for %d atoms*
    More than the maximum # of neighbors was found multiple times.  This
    was unexpected.
@@ -644,6 +775,24 @@ Please also see the page with :doc:`Error messages <Errors_messages>`
    The deformation will heat the SRD particles so this can
    be dangerous.
 
+*Using kspace solver on system with no charge*
+   Self-explanatory.
+
+*Using largest cut-off for lj/long/dipole/long long long*
+   Self-explanatory.
+
+*Using largest cutoff for buck/long/coul/long*
+   Self-explanatory.
+
+*Using largest cutoff for lj/long/coul/long*
+   Self-explanatory.
+
+*Using largest cutoff for pair_style lj/long/tip4p/long*
+   Self-explanatory.
+
+*Using package gpu without any pair style defined*
+   Self-explanatory.
+
 *Using pair potential shift with pair_modify compute no*
    The shift effects will thus not be computed.
 

doc/src/Examples.rst

@@ -54,7 +54,7 @@ Lowercase directories
 +-------------+------------------------------------------------------------------+
 | body        | body particles, 2d system                                        |
 +-------------+------------------------------------------------------------------+
-| bpm         | simulations of solid elastic/plastic deformation and fracture    |
+| bpm         | BPM simulations of pouring elastic grains and plate impact       |
 +-------------+------------------------------------------------------------------+
 | cmap        | CMAP 5-body contributions to CHARMM force field                  |
 +-------------+------------------------------------------------------------------+
@@ -146,8 +146,6 @@ Lowercase directories
 +-------------+------------------------------------------------------------------+
 | streitz     | use of Streitz/Mintmire potential with charge equilibration      |
 +-------------+------------------------------------------------------------------+
-| stress_vcm  | removing binned rigid body motion from binned stress profile     |
-+-------------+------------------------------------------------------------------+
 | tad         | temperature-accelerated dynamics of vacancy diffusion in bulk Si |
 +-------------+------------------------------------------------------------------+
 | threebody   | regression test input for a variety of manybody potentials       |

doc/src/Fortran.rst

@@ -16,7 +16,7 @@ compiled alongside the code using it from the source code in
 ``fortran/lammps.f90`` *and* with the same compiler used to build the
 rest of the Fortran code that interfaces to LAMMPS.  When linking, you
 also need to :doc:`link to the LAMMPS library <Build_link>`.  A typical
-command for a simple program using the Fortran interface would be:
+command line for a simple program using the Fortran interface would be:
 
 .. code-block:: bash
 
@@ -91,12 +91,12 @@ function and triggered with the optional logical argument set to
      CALL lmp%close(.TRUE.)
    END PROGRAM testlib
 
-It is also possible to pass command-line flags from Fortran to C/C++ and
+It is also possible to pass command line flags from Fortran to C/C++ and
 thus make the resulting executable behave similarly to the standalone
 executable (it will ignore the `-in/-i` flag, though).  This allows
-using the command-line to configure accelerator and suffix settings,
+using the command line to configure accelerator and suffix settings,
 configure screen and logfile output, or to set index style variables
-from the command-line and more.  Here is a correspondingly adapted
+from the command line and more.  Here is a correspondingly adapted
 version of the previous example:
 
 .. code-block:: fortran
@@ -108,7 +108,7 @@ version of the previous example:
      CHARACTER(LEN=128), ALLOCATABLE :: command_args(:)
      INTEGER :: i, argc
 
-     ! copy command-line flags to `command_args()`
+     ! copy command line flags to `command_args()`
      argc = COMMAND_ARGUMENT_COUNT()
      ALLOCATE(command_args(0:argc))
      DO i=0, argc
@@ -321,14 +321,6 @@ of the contents of the :f:mod:`LIBLAMMPS` Fortran interface to LAMMPS.
    :ftype set_string_variable: subroutine
    :f set_internal_variable: :f:subr:`set_internal_variable`
    :ftype set_internal_variable: subroutine
-   :f eval: :f:func:`eval`
-   :ftype eval: function
-   :f clearstep_compute: :f:subr:`clearstep_compute`
-   :ftype clearstep_compute: subroutine
-   :f addstep_compute: :f:subr:`addstep_compute`
-   :ftype addstep_compute: subroutine
-   :f addstep_compute_all: :f:subr:`addstep_compute_all`
-   :ftype addstep_compute_all: subroutine
    :f gather_atoms: :f:subr:`gather_atoms`
    :ftype gather_atoms: subroutine
    :f gather_atoms_concat: :f:subr:`gather_atoms_concat`
@@ -456,7 +448,7 @@ of the contents of the :f:mod:`LIBLAMMPS` Fortran interface to LAMMPS.
    compiled with MPI support, it will also initialize MPI, if it has
    not already been initialized before.
 
-   The *args* argument with the list of command-line parameters is
+   The *args* argument with the list of command line parameters is
    optional and so it the *comm* argument with the MPI communicator.
    If *comm* is not provided, ``MPI_COMM_WORLD`` is assumed. For
    more details please see the documentation of :cpp:func:`lammps_open`.
@@ -962,7 +954,6 @@ Procedures Bound to the :f:type:`lammps` Derived Type
       :f:func:`extract_atom` between runs.
 
    .. admonition:: Array index order
-      :class: tip
 
       Two-dimensional arrays returned from :f:func:`extract_atom` will be
       **transposed** from equivalent arrays in C, and they will be indexed
@@ -1075,7 +1066,6 @@ Procedures Bound to the :f:type:`lammps` Derived Type
    you based on data from the :cpp:class:`Compute` class.
 
    .. admonition:: Array index order
-      :class: tip
 
       Two-dimensional arrays returned from :f:func:`extract_compute` will be
       **transposed** from equivalent arrays in C, and they will be indexed
@@ -1334,7 +1324,6 @@ Procedures Bound to the :f:type:`lammps` Derived Type
    :rtype data: polymorphic
 
    .. admonition:: Array index order
-      :class: tip
 
       Two-dimensional global, per-atom, or local array data from
       :f:func:`extract_fix` will be **transposed** from equivalent arrays in
@@ -1459,62 +1448,11 @@ Procedures Bound to the :f:type:`lammps` Derived Type
    an internal-style variable, an error is generated.
 
    :p character(len=*) name: name of the variable
-   :p real(c_double) val:  new value to assign to the variable
+   :p read(c_double) val:  new value to assign to the variable
    :to: :cpp:func:`lammps_set_internal_variable`
 
 --------
 
-.. f:function:: eval(expr)
-
-   This function is a wrapper around :cpp:func:`lammps_eval` that takes a
-   LAMMPS equal style variable string, evaluates it and returns the resulting
-   scalar value as a floating-point number.
-
-   .. versionadded:: 4Feb2025
-
-   :p character(len=\*) expr: string to be evaluated
-   :to: :cpp:func:`lammps_eval`
-   :r value [real(c_double)]: result of the evaluated string
-
---------
-
-.. f:subroutine:: clearstep_compute()
-
-   Clear whether a compute has been invoked
-
-   .. versionadded:: 4Feb2025
-
-   :to: :cpp:func:`lammps_clearstep_compute`
-
---------
-
-.. f:subroutine:: addstep_compute(nextstep)
-
-   Add timestep to list of future compute invocations
-   if the compute has been invoked on the current timestep
-
-   .. versionadded:: 4Feb2025
-
-   overloaded for 32-bit and 64-bit integer arguments
-
-   :p integer(kind=8 or kind=4) nextstep: next timestep
-   :to: :cpp:func:`lammps_addstep_compute`
-
---------
-
-.. f:subroutine:: addstep_compute_all(nextstep)
-
-   Add timestep to list of future compute invocations
-
-   .. versionadded:: 4Feb2025
-
-   overloaded for 32-bit and 64-bit integer arguments
-
-   :p integer(kind=8 or kind=4) nextstep: next timestep
-   :to: :cpp:func:`lammps_addstep_compute_all`
-
---------
-
 .. f:subroutine:: gather_atoms(name, count, data)
 
    This function calls :cpp:func:`lammps_gather_atoms` to gather the named
@@ -2773,7 +2711,8 @@ Procedures Bound to the :f:type:`lammps` Derived Type
         END SUBROUTINE external_callback
       END INTERFACE
 
-   where ``c_bigint`` is ``c_int64_t`` and ``c_tagint`` is ``c_int64_t`` if
+   where ``c_bigint`` is ``c_int`` if ``-DLAMMPS_SMALLSMALL`` was used and
+   ``c_int64_t`` otherwise; and ``c_tagint`` is ``c_int64_t`` if
    ``-DLAMMPS_BIGBIG`` was used and ``c_int`` otherwise.
 
    The argument *caller* to :f:subr:`set_fix_external_callback` is unlimited

doc/src/Howto.rst

@@ -40,7 +40,6 @@ Settings howto
    Howto_walls
    Howto_nemd
    Howto_dispersion
-   Howto_bulk2slab
 
 Analysis howto
 ==============
@@ -104,7 +103,6 @@ Tutorials howto
    Howto_github
    Howto_lammps_gui
    Howto_moltemplate
-   Howto_python
    Howto_pylammps
    Howto_wsl
 

doc/src/Howto_barostat.rst

@@ -10,21 +10,20 @@ and/or pressure (P) is specified by the user, and the thermostat or
 barostat attempts to equilibrate the system to the requested T and/or
 P.
 
-Barostatting in LAMMPS is performed by :doc:`fixes <fix>`.  Three
+Barostatting in LAMMPS is performed by :doc:`fixes <fix>`.  Two
 barostatting methods are currently available: Nose-Hoover (npt and
-nph), Berendsen, and various linear controllers in deform/pressure:
+nph) and Berendsen:
 
 * :doc:`fix npt <fix_nh>`
 * :doc:`fix npt/sphere <fix_npt_sphere>`
 * :doc:`fix npt/asphere <fix_npt_asphere>`
 * :doc:`fix nph <fix_nh>`
 * :doc:`fix press/berendsen <fix_press_berendsen>`
-* :doc:`fix deform/pressure <fix_deform_pressure>`
 
 The :doc:`fix npt <fix_nh>` commands include a Nose-Hoover thermostat
 and barostat.  :doc:`Fix nph <fix_nh>` is just a Nose/Hoover barostat;
-it does no thermostatting.  The fixes :doc:`nph <fix_nh>`, :doc:`press/berendsen <fix_press_berendsen>`, and :doc:`deform/pressure <fix_deform_pressure>`
-can be used in conjunction with any of the thermostatting fixes.
+it does no thermostatting.  Both :doc:`fix nph <fix_nh>` and :doc:`fix press/berendsen <fix_press_berendsen>` can be used in conjunction
+with any of the thermostatting fixes.
 
 As with the :doc:`thermostats <Howto_thermostat>`, :doc:`fix npt <fix_nh>`
 and :doc:`fix nph <fix_nh>` only use translational motion of the
@@ -45,9 +44,9 @@ a temperature or pressure compute to a barostatting fix.
 .. note::
 
    As with the thermostats, the Nose/Hoover methods (:doc:`fix npt <fix_nh>` and :doc:`fix nph <fix_nh>`) perform time integration.
-   :doc:`Fix press/berendsen <fix_press_berendsen>` and :doc:`fix deform/pressure <fix_deform_pressure>`
-   do NOT, so they should be used with one of the constant NVE fixes or with
-   one of the NVT fixes.
+   :doc:`Fix press/berendsen <fix_press_berendsen>` does NOT, so it should
+   be used with one of the constant NVE fixes or with one of the NVT
+   fixes.
 
 Thermodynamic output, which can be setup via the
 :doc:`thermo_style <thermo_style>` command, often includes pressure

doc/src/Howto_bioFF.rst

@@ -1,5 +1,5 @@
-CHARMM, AMBER, COMPASS, DREIDING, and OPLS force fields
-=======================================================
+CHARMM, AMBER, COMPASS, and DREIDING force fields
+=================================================
 
 A compact summary of the concepts, definitions, and properties of
 force fields with explicit bonded interactions (like the ones discussed
@@ -236,40 +236,6 @@ documentation for the formula it computes.
 
 * :doc:`special_bonds <special_bonds>` dreiding
 
-OPLS
-----
-
-OPLS (Optimized Potentials for Liquid Simulations) is a general force
-field for atomistic simulation of organic molecules in solvent.  It was
-developed by the `Jorgensen group
-<https://traken.chem.yale.edu/oplsaam.html>`_ at Purdue University and
-later at Yale University.  Multiple versions of the OPLS parameters
-exist for united atom representations (OPLS-UA) and for all-atom
-representations (OPLS-AA).
-
-This force field is based on atom types mapped to specific functional
-groups in organic and biological molecules.  Each atom includes a
-static, partial atomic charge reflecting the oxidation state of the
-element derived from its bonded neighbors :ref:`(Jorgensen)
-<howto-jorgensen>` and computed based on increments determined by the
-atom type of the atoms bond to it.
-
-The interaction styles listed below compute force field formulas that
-are fully or in part consistent with the OPLS style force fields.  See
-each command's documentation for the formula it computes.  Some are only
-compatible with a subset of OPLS interactions.
-
-* :doc:`bond_style <bond_harmonic>` harmonic
-* :doc:`angle_style <angle_harmonic>` harmonic
-* :doc:`dihedral_style <dihedral_opls>` opls
-* :doc:`improper_style <improper_cvff>` cvff
-* :doc:`improper_style <improper_fourier>` fourier
-* :doc:`improper_style <improper_harmonic>` harmonic
-* :doc:`pair_style <pair_lj_cut_coul>` lj/cut/coul/cut
-* :doc:`pair_style <pair_lj_cut_coul>` lj/cut/coul/long
-* :doc:`pair_modify <pair_modify>` geometric
-* :doc:`special_bonds <special_bonds>` lj/coul 0.0 0.0 0.5
-
 ----------
 
 .. _Typelabel2:
@@ -300,6 +266,3 @@ compatible with a subset of OPLS interactions.
 
 **(Mayo)** Mayo, Olfason, Goddard III (1990). J Phys Chem, 94, 8897-8909. https://doi.org/10.1021/j100389a010
 
-.. _howto-Jorgensen:
-
-**(Jorgensen)** Jorgensen, Tirado-Rives (1988). J Am Chem Soc, 110, 1657-1666. https://doi.org/10.1021/ja00214a001

doc/src/Howto_bpm.rst

@@ -5,11 +5,7 @@ The BPM package implements bonded particle models which can be used to
 simulate mesoscale solids.  Solids are constructed as a collection of
 particles, which each represent a coarse-grained region of space much
 larger than the atomistic scale.  Particles within a solid region are
-then connected by a network of bonds to model solid elasticity.
-There are many names for methods that are based on similar (or
-equivalent) capabilities to those in this package, including, but not
-limited to, cohesive beam models, bonded DEMs, lattice spring models,
-mass spring models, and lattice particle methods.
+then connected by a network of bonds to provide solid elasticity.
 
 Unlike traditional bonds in molecular dynamics, the equilibrium bond
 length can vary between bonds. Bonds store the reference state.  This
@@ -42,14 +38,11 @@ such as those created by pouring grains using :doc:`fix pour
 
 ----------
 
-Currently, there are three types of bonds included in the BPM package. The
+Currently, there are two types of bonds included in the BPM package. The
 first bond style, :doc:`bond bpm/spring <bond_bpm_spring>`, only applies
 pairwise, central body forces. Point particles must have :doc:`bond atom
 style <atom_style>` and may be thought of as nodes in a spring
-network. An optional multibody term can be used to adjust the network's
-Poisson's ratio. The :doc:`bpm/spring/plastic <bond_bpm_spring_plastic>`
-bond style is similar except it adds a plastic yield strain.
-Alternatively, the third bond style, :doc:`bond bpm/rotational
+network. Alternatively, the second bond style, :doc:`bond bpm/rotational
 <bond_bpm_rotational>`, resolves tangential forces and torques arising
 with the shearing, bending, and twisting of the bond due to rotation or
 displacement of particles.  Particles are similar to those used in the
@@ -62,9 +55,8 @@ orientation similar to :doc:`fix nve/asphere <fix_nve_asphere>`.
 
 In addition to bond styles, a new pair style :doc:`pair bpm/spring
 <pair_bpm_spring>` was added to accompany the bpm/spring bond
-style. By default, this pair style is simply a hookean repulsion with
-similar velocity damping as its sister bond style, but optional
-arguments can be used to modify the force.
+style. This pair style is simply a hookean repulsion with similar
+velocity damping as its sister bond style.
 
 ----------
 

doc/src/Howto_bulk2slab.rst

@@ -1,160 +0,0 @@
-===========================
-Convert bulk system to slab
-===========================
-
-A regularly encountered simulation problem is how to convert a bulk
-system that has been run for a while to equilibrate into a slab system
-with some vacuum space and free surfaces.  The challenge here is that
-one cannot just change the box dimensions with the :doc:`change_box
-command <change_box>` or edit the box boundaries in a data file because
-some atoms will have non-zero image flags from diffusing around.
-
-Changing the box dimensions results in an undesired displacement of
-those atoms, since the image flags indicate how many times the box
-length in x-, y-, or z-direction needs to be added or subtracted to get
-the "unwrapped" coordinates.  By changing the box dimension this
-distance is changed and thus those atoms move unphysically relative to
-their neighbors with zero image flags.  Setting image flags forcibly to
-zero creates problems because that could break apart molecules by having
-one atom of a bond on the top of the system and the other at the bottom.
-
-.. _bulk2slab:
-.. figure:: JPG/rhodo-both.jpg
-   :figwidth: 80%
-   :figclass: align-center
-
-   Snapshots of the bulk Rhodopsin in lipid layer and water system (right)
-   and the generated slab geometry (left)
-
-.. admonition:: Disclaimer
-   :class: note
-
-   The following workflow will work for many bulk systems, but not all.
-   Some systems cannot be converted (e.g. polymers with bonds to the
-   same molecule across periodic boundaries, sometimes called "infinite
-   polymers").  The amount of vacuum that needs to be added depends on
-   the length of the molecules where the system is split (the example
-   here splits where there is water with short molecules).  In some
-   cases, the system may need to be re-centered in the box first using
-   the :doc:`displace_atoms command <displace_atoms>`.  Also, the time
-   spent on strong thermalization and equilibration will depend on the
-   specific system and its thermodynamic conditions.
-
-Below is a suggested workflow using the :doc:`Rhodopsin benchmark input
-<Speed_bench>` for demonstration.  The figure shows the state *before*
-the procedure on the left (with unwrapped atoms that have diffused out
-of the box) and *after* on the right (with the vacuum added above and
-below).  The procedure is implemented by modifying a copy of the
-``in.rhodo`` input file.  The first lines up to and including the
-:doc:`read_data command <read_data>` remain unchanged.  Then we insert
-the following lines to add vacuum to the z direction above and below the
-system:
-
-.. code-block:: LAMMPS
-
-   variable       delta index 10.0
-   reset_atoms    image all
-   write_dump     all custom rhodo-unwrap.lammpstrj id xu yu zu
-   change_box     all z final $(zlo-2.0*v_delta) $(zhi+2.0*v_delta) &
-                      boundary p p f
-   read_dump      rhodo-unwrap.lammpstrj 0 x y z box no replace yes
-   kspace_modify  slab 3.0
-
-Specifically, the :doc:`variable delta <variable>` (set to 10.0)
-represents a distance that determines the amount of vacuum added: we add
-twice its value in each direction to the z-dimension; thus in total
-:math:`40 \AA` get added.  The :doc:`reset_atoms image all
-<reset_atoms>` command shall reset any image flags to become either 0 or
-:math:`\pm 1` and thus have the minimum distance from the center of the
-simulation box, but the correct relative distance for bonded atoms.
-
-The :doc:`write_dump command <write_dump>` then writes out the resulting
-*unwrapped* coordinates of the system.  After expanding the box,
-coordinates that were outside the box should now be inside and the
-unwrapped coordinates will become "wrapped", while atoms outside the
-periodic boundaries will be wrapped back into the box and their image
-flags in those directions restored.
-
-The :doc:`change_box command <change_box>` adds the desired
-distance to the low and high box boundary in z-direction and then changes
-the :doc:`boundary to "p p f" <boundary>` which will force the image
-flags in z-direction to zero and create an undesired displacement for
-the atoms with non-zero image flags.
-
-With the :doc:`read_dump command <read_dump>` we read back and replace
-partially incorrect coordinates with the previously saved, unwrapped
-coordinates.  It is important to ignore the box dimensions stored in the
-dump file.  We want to preserve the expanded box.  Finally, we turn on
-the slab correction for the PPPM long-range solver with the
-:doc:`kspace_modify command <kspace_modify>` as required when using a
-long range Coulomb solver for non-periodic z-dimension.
-
-Next we replace the :doc:`fix npt command <fix_nh>` with:
-
-.. code-block:: LAMMPS
-
-   fix            2 nvt temp 300.0 300.0 10.0
-
-We now have an open system and thus the adjustment of the cell in
-z-direction is no longer required.  Since splitting the bulk water
-region where the vacuum is inserted, creates surface atoms with high
-potential energy, we reduce the thermostat time constant from 100.0 to
-10.0 to remove excess kinetic energy resulting from that change faster.
-
-Also the high potential energy of the surface atoms can cause that some
-of them are ejected from the slab.  In order to suppress that, we add
-soft harmonic walls to push back any atoms that want to leave the slab.
-To determine the position of the wall, we first need to to determine the
-extent of the atoms in z-direction and then place the harmonic walls
-based on that information:
-
-.. code-block:: LAMMPS
-
-   compute         zmin all reduce min z
-   compute         zmax all reduce max z
-   thermo_style    custom zlo c_zmin zhi c_zmax
-   run             0 post no
-   fix             3 all wall/harmonic zhi $(c_zmax+v_delta) 10.0 0.0 ${delta} &
-                                       zlo $(c_zmin-v_delta) 10.0 0.0 ${delta}
-
-The two :doc:`compute reduce <compute_reduce>` command determine the
-minimum and maximum z-coordinate across all atoms.  In order to trigger
-the execution of the compute commands we need to "consume" them.  This
-is done with the :doc:`thermo_style custom <thermo_style>` command
-followed by the :doc:`run 0 <run>` command.  This avoids and error
-accessing the min/max values determined by the compute commands to
-compute the location of the wall in lower and upper direction.  This
-uses the previously defined *delta* variable to determine the distance
-of the wall from the extent of the system and the cutoff for the wall
-interaction.  This way only atoms that move beyond the min/max values in
-z-direction will experience a restoring force, nudging them back to the
-slab.  The force constant of :math:`10.0 \frac{\mathrm{kcal/mol}}{\AA}`
-was determined empirically.
-
-Adding these "restoring" soft walls assist in making the free surfaces
-above and below the slab flat, instead of having rugged or ondulated
-surfaces.  The impact of the walls can be changed by adjusting the force
-constant, cutoff, and position of the wall.
-
-Finally, we replace the :doc:`run 100 <run>` of the original input with:
-
-.. code-block:: LAMMPS
-
-   run             1000 post no
-
-   unfix           3
-   fix             2 all nvt temp 300.0 300.0 100.0
-   run             1000 post no
-
-   write_data      data.rhodo-slab
-
-This runs the system converted to a slab first for 1000 MD steps using
-the walls and stronger Nose-Hoover thermostat.  Then the walls are
-removed with :doc:`unfix 3 <unfix>` and the thermostat time constant
-reset to 100.0 and the system run for another 1000 steps.  Finally the
-resulting slab geometry is written to a new data file
-``data.rhodo-slab`` with a :doc:`write_data command <write_data>`.  The
-number of MD steps required to reach a proper equilibrium state is very
-likely larger.  The number of 1000 steps (corresponding to 2
-picoseconds) was chosen for demonstration purposes, so that the
-procedure can be easily and quickly tested.

doc/src/Howto_chunk.rst

@@ -58,30 +58,28 @@ chunk ID for an individual atom can also be static (e.g. a molecule
 ID), or dynamic (e.g. what spatial bin an atom is in as it moves).
 
 Note that this compute allows the per-atom output of other
-:doc:`computes <compute>`, :doc:`fixes <fix>`, and :doc:`variables
-<variable>` to be used to define chunk IDs for each atom.  This means
-you can write your own compute or fix to output a per-atom quantity to
-use as chunk ID.  See the :doc:`Modify <Modify>` doc pages for info on
-how to do this.  You can also define a :doc:`per-atom variable
-<variable>` in the input script that uses a formula to generate a chunk
-ID for each atom.
+:doc:`computes <compute>`, :doc:`fixes <fix>`, and
+:doc:`variables <variable>` to be used to define chunk IDs for each
+atom.  This means you can write your own compute or fix to output a
+per-atom quantity to use as chunk ID.  See the :doc:`Modify <Modify>`
+doc pages for info on how to do this.  You can also define a :doc:`per-atom variable <variable>` in the input script that uses a formula to
+generate a chunk ID for each atom.
 
 Fix ave/chunk command:
 ----------------------
 
-This fix takes the ID of a :doc:`compute chunk/atom
-<compute_chunk_atom>` command as input.  For each chunk, it then sums
-one or more specified per-atom values over the atoms in each chunk.  The
-per-atom values can be any atom property, such as velocity, force,
-charge, potential energy, kinetic energy, stress, etc.  Additional
-keywords are defined for per-chunk properties like density and
-temperature.  More generally any per-atom value generated by other
-:doc:`computes <compute>`, :doc:`fixes <fix>`, and :doc:`per-atom
-variables <variable>`, can be summed over atoms in each chunk.
+This fix takes the ID of a :doc:`compute chunk/atom <compute_chunk_atom>` command as input.  For each chunk,
+it then sums one or more specified per-atom values over the atoms in
+each chunk.  The per-atom values can be any atom property, such as
+velocity, force, charge, potential energy, kinetic energy, stress,
+etc.  Additional keywords are defined for per-chunk properties like
+density and temperature.  More generally any per-atom value generated
+by other :doc:`computes <compute>`, :doc:`fixes <fix>`, and :doc:`per-atom variables <variable>`, can be summed over atoms in each chunk.
 
 Similar to other averaging fixes, this fix allows the summed per-chunk
 values to be time-averaged in various ways, and output to a file.  The
-fix produces a global array as output with one row of values per chunk.
+fix produces a global array as output with one row of values per
+chunk.
 
 Compute \*/chunk commands:
 --------------------------
@@ -99,20 +97,17 @@ category:
 * :doc:`compute torque/chunk <compute_vcm_chunk>`
 * :doc:`compute vcm/chunk <compute_vcm_chunk>`
 
-They each take the ID of a :doc:`compute chunk/atom
-<compute_chunk_atom>` command as input.  As their names indicate, they
-calculate the center-of-mass, radius of gyration, moments of inertia,
-mean-squared displacement, temperature, torque, and velocity of
-center-of-mass for each chunk of atoms.  The :doc:`compute
-property/chunk <compute_property_chunk>` command can tally the count of
-atoms in each chunk and extract other per-chunk properties.
+They each take the ID of a :doc:`compute chunk/atom <compute_chunk_atom>` command as input.  As their names
+indicate, they calculate the center-of-mass, radius of gyration,
+moments of inertia, mean-squared displacement, temperature, torque,
+and velocity of center-of-mass for each chunk of atoms.  The :doc:`compute property/chunk <compute_property_chunk>` command can tally the
+count of atoms in each chunk and extract other per-chunk properties.
 
-The reason these various calculations are not part of the :doc:`fix
-ave/chunk command <fix_ave_chunk>`, is that each requires a more
+The reason these various calculations are not part of the :doc:`fix ave/chunk command <fix_ave_chunk>`, is that each requires a more
 complicated operation than simply summing and averaging over per-atom
-values in each chunk.  For example, many of them require calculation of
-a center of mass, which requires summing mass\*position over the atoms
-and then dividing by summed mass.
+values in each chunk.  For example, many of them require calculation
+of a center of mass, which requires summing mass\*position over the
+atoms and then dividing by summed mass.
 
 All of these computes produce a global vector or global array as
 output, with one or more values per chunk.  The output can be used in
@@ -123,10 +118,9 @@ various ways:
 * As input to the :doc:`fix ave/histo <fix_ave_histo>` command to
   histogram values across chunks.  E.g. a histogram of cluster sizes or
   molecule diffusion rates.
-* As input to special functions of :doc:`equal-style variables
-  <variable>`, like sum() and max() and ave().  E.g. to find the largest
-  cluster or fastest diffusing molecule or average radius-of-gyration of
-  a set of molecules (chunks).
+* As input to special functions of :doc:`equal-style variables <variable>`, like sum() and max() and ave().  E.g. to
+  find the largest cluster or fastest diffusing molecule or average
+  radius-of-gyration of a set of molecules (chunks).
 
 Other chunk commands:
 ---------------------
@@ -144,10 +138,9 @@ spatially average per-chunk values calculated by a per-chunk compute.
 
 The :doc:`compute reduce/chunk <compute_reduce_chunk>` command reduces a
 peratom value across the atoms in each chunk to produce a value per
-chunk.  When used with the :doc:`compute chunk/spread/atom
-<compute_chunk_spread_atom>` command it can create peratom values that
-induce a new set of chunks with a second :doc:`compute chunk/atom
-<compute_chunk_atom>` command.
+chunk.  When used with the :doc:`compute chunk/spread/atom <compute_chunk_spread_atom>` command it can
+create peratom values that induce a new set of chunks with a second
+:doc:`compute chunk/atom <compute_chunk_atom>` command.
 
 Example calculations with chunks
 --------------------------------

doc/src/Howto_cmake.rst

@@ -56,7 +56,7 @@ using a shell like Bash or Zsh.
    Visual Studio IDE with the bundled CMake or from the Windows command prompt using
    a separately installed CMake package, both using the native Microsoft Visual C++
    compilers and (optionally) the Microsoft MPI SDK.  This tutorial, however, only
-   covers unix-like command-line interfaces.
+   covers unix-like command line interfaces.
 
 We also assume that you have downloaded and unpacked a recent LAMMPS source code package
 or used Git to create a clone of the LAMMPS sources on your compilation machine.
@@ -277,7 +277,7 @@ Setting options
 ---------------
 
 Options that enable, disable or modify settings are modified by setting
-the value of CMake variables. This is done on the command-line with the
+the value of CMake variables. This is done on the command line with the
 *-D* flag in the format ``-D VARIABLE=value``, e.g. ``-D
 CMAKE_BUILD_TYPE=Release`` or ``-D BUILD_MPI=on``.  There is one quirk:
 when used before the CMake directory, there may be a space between the
@@ -348,7 +348,7 @@ Some common LAMMPS specific variables
    * - ``FFT``
      - select which FFT library to use: ``FFTW3``, ``MKL``, ``KISS`` (default, unless FFTW3 is found)
    * - ``FFT_KOKKOS``
-     - select which FFT library to use in Kokkos-enabled styles: ``FFTW3``, ``MKL``, ``HIPFFT``, ``CUFFT``, ``MKL_GPU``, ``KISS`` (default)
+     - select which FFT library to use in Kokkos-enabled styles: ``FFTW3``, ``MKL``, ``HIPFFT``, ``CUFFT``, ``KISS`` (default)
    * - ``FFT_SINGLE``
      - select whether to use single precision FFTs (default: ``off``)
    * - ``WITH_JPEG``
@@ -376,7 +376,7 @@ Using presets
 -------------
 
 Since LAMMPS has a lot of optional features and packages, specifying
-them all on the command-line can be tedious. Or when selecting a
+them all on the command line can be tedious. Or when selecting a
 different compiler toolchain, multiple options have to be changed
 consistently and that is rather error prone. Or when enabling certain
 packages, they require consistent settings to be operated in a
@@ -384,7 +384,7 @@ particular mode.  For this purpose, we are providing a selection of
 "preset files" for CMake in the folder ``cmake/presets``.  They
 represent a way to pre-load or override the CMake configuration cache by
 setting or changing CMake variables.  Preset files are loaded using the
-*-C* command-line flag. You can combine loading multiple preset files or
+*-C* command line flag. You can combine loading multiple preset files or
 change some variables later with additional *-D* flags.  A few examples:
 
 .. code-block:: bash

doc/src/Howto_github.rst

@@ -163,7 +163,7 @@ After everything is done, add the files to the branch and commit them:
    *git rm*, *git mv* for adding, removing, renaming individual files,
    respectively, and then *git commit* to finalize the commit.
    Carefully check all pending changes with *git status* before
-   committing them.  If you find doing this on the command-line too
+   committing them.  If you find doing this on the command line too
    tedious, consider using a GUI, for example the one included in git
    distributions written in Tk, i.e. use *git gui* (on some Linux
    distributions it may be required to install an additional package to
@@ -487,10 +487,10 @@ updates are back-ported from the *develop* branch to the *maintenance*
 branch and occasionally merged to *stable* as an update release.
 
 Furthermore, the naming of the release tags now follow the pattern
-"patch\_<Day><Month><Year>" to simplify comparisons between releases.
-For stable releases additional "stable\_<Day><Month><Year>" tags are
+"patch_<Day><Month><Year>" to simplify comparisons between releases.
+For stable releases additional "stable_<Day><Month><Year>" tags are
 applied and update releases are tagged with
-"stable\_<Day><Month><Year>\_update<Number>", Finally, all releases and
+"stable_<Day><Month><Year>_update<Number>", Finally, all releases and
 submissions are subject to automatic testing and code checks to make
 sure they compile with a variety of compilers and popular operating
 systems.  Some unit and regression testing is applied as well.

doc/src/Howto_lammps_gui.rst

@@ -1,47 +1,45 @@
 Using LAMMPS-GUI
 ================
 
-This document describes **LAMMPS-GUI version 1.6**.
+.. image:: JPG/lammps-gui-banner.png
+   :align: center
+   :scale: 75%
+
+LAMMPS-GUI is a graphical text editor programmed using the `Qt Framework
+<https://www.qt.io/>`_ and customized for editing and running LAMMPS
+input files.  It is linked to the :ref:`LAMMPS library <lammps_c_api>`
+and thus can run LAMMPS directly using the contents of the editor's text
+buffer as input and without having to launch the LAMMPS executable.
+
+It *differs* from other known interfaces to LAMMPS in that it can
+retrieve and display information from LAMMPS *while it is running*,
+display visualizations created with the :doc:`dump image command
+<dump_image>`, can launch the online LAMMPS documentation for known
+LAMMPS commands and styles, and directly integrates with a collection
+of LAMMPS tutorials (:ref:`Gravelle1 <Gravelle1>`).
+
+This document describes **LAMMPS-GUI version 1.7**.
 
 -----
 
-LAMMPS-GUI is a graphical text editor customized for editing LAMMPS
-input files that is linked to the :ref:`LAMMPS library <lammps_c_api>`
-and thus can run LAMMPS directly using the contents of the editor's text
-buffer as input.  It can retrieve and display information from LAMMPS
-while it is running, display visualizations created with the :doc:`dump
-image command <dump_image>`, and is adapted specifically for editing
-LAMMPS input files through text completion and reformatting, and linking
-to the online LAMMPS documentation for known LAMMPS commands and styles.
+.. contents::
 
-.. note::
+----
 
-   Pre-compiled, ready-to-use LAMMPS-GUI executables for Linux x86\_64
-   (Ubuntu 20.04LTS or later and compatible), macOS (version 11 aka Big
-   Sur or later), and Windows (version 10 or later) :ref:`are available
-   <lammps_gui_install>` for download.  Non-MPI LAMMPS executables (as
-   ``lmp``) for running LAMMPS from the command-line and :doc:`some
-   LAMMPS tools <Tools>` compiled executables are also included.
-   Also, the pre-compiled LAMMPS-GUI packages include the WHAM executables
-   from http://membrane.urmc.rochester.edu/content/wham/ for use with
-   LAMMPS tutorials.
+LAMMPS-GUI aims to provide the traditional experience of running LAMMPS
+using a text editor, a command-line window, and launching the LAMMPS
+text-mode executable printing output to the screen, but just integrated
+into a single application:
 
-   The source code for LAMMPS-GUI is included in the LAMMPS source code
-   distribution and can be found in the ``tools/lammps-gui`` folder.  It
-   can be compiled alongside LAMMPS when :doc:`compiling with CMake
-   <Build_cmake>`.
+- Write and edit LAMMPS input files using the built-in text editor.
+- Run LAMMPS on those input file with command-line flags to enable a
+  specific accelerator package (or none).
+- Extract data from the created files (like trajectory files, log files
+  with thermodynamic data, or images) and visualize it using external
+  software.
 
-LAMMPS-GUI tries to provide an experience similar to what people
-traditionally would have running LAMMPS using a command-line window and
-the console LAMMPS executable but just rolled into a single executable:
-
-- writing & editing LAMMPS input files with a text editor
-- run LAMMPS on those input file with selected command-line flags
-- extract data from the created files and visualize it with and
-  external software
-
-That procedure is quite effective for people proficient in using the
-command-line, as that allows them to use tools for the individual steps
+That traditional procedure is effective for people proficient in using the
+command-line, as it allows them to use the tools for the individual steps
 that they are most comfortable with.  In fact, it is often *required* to
 adopt this workflow when running LAMMPS simulations on high-performance
 computing facilities.
@@ -52,37 +50,69 @@ window or using external programs, let alone writing scripts to extract
 data from the generated output.  It also integrates well with graphical
 desktop environments where the `.lmp` filename extension can be
 registered with LAMMPS-GUI as the executable to launch when double
-clicking on such files.  Also, LAMMPS-GUI has support for drag-n-drop,
-i.e.  an input file can be selected and then moved and dropped on the
-LAMMPS-GUI executable, and LAMMPS-GUI will launch and read the file into
-its buffer.  In many cases LAMMPS-GUI will be integrated into the
-graphical desktop environment and can be launched like other
-applications.
+clicking on such files using a file manager.  LAMMPS-GUI also has
+support for 'drag and drop' for opening inputs: an input file can
+be selected and then moved and dropped on the LAMMPS-GUI executable;
+LAMMPS-GUI will launch and read the file into its buffer.  Input files
+also can be dropped into the editor window of the running LAMMPS-GUI
+application, which will close the current file and open the new file.
+In many cases LAMMPS-GUI will be integrated into the graphical desktop
+environment and can be launched just like any other applications from
+the graphical interface.
 
 LAMMPS-GUI thus makes it easier for beginners to get started running
-simple LAMMPS simulations.  It is very suitable for tutorials on LAMMPS
-since you only need to learn how to use a single program for most tasks
-and thus time can be saved and people can focus on learning LAMMPS.
-The tutorials at https://lammpstutorials.github.io/ are specifically
-updated for use with LAMMPS-GUI and can their tutorial materials can
-be downloaded and loaded directly from the GUI.
+LAMMPS and is well-suited for LAMMPS tutorials, since you only need to
+work with a single, ready-to-use program for most of the tasks.  Plus it
+is available for download as pre-compiled package for popular operating
+systems (Linux, macOS, Windows).  This saves time and allows users to
+focus on learning LAMMPS itself, without the need to learn how to
+compile LAMMPS, learn how to use the command line, or learn how to use a
+separate text editor.
 
-Another design goal is to keep the barrier low when replacing part of
-the functionality of LAMMPS-GUI with external tools.  That said, LAMMPS-GUI
-has some unique functionality that is not found elsewhere:
+The tutorials at https://lammpstutorials.github.io/ are specifically
+updated for use with LAMMPS-GUI and their tutorial materials can be
+downloaded and edited directly from within the GUI while automatically
+loading the matching tutorial instructions into a webbrowser.
+
+Yet the basic control flow remains similar to running LAMMPS from the
+command line, so the barrier for replacing parts of the functionality of
+LAMMPS-GUI with external tools is low.  That said, LAMMPS-GUI offer some
+unique features that are not easily found elsewhere:
 
 - auto-adapting to features available in the integrated LAMMPS library
-- auto-completion for LAMMPS commands and options
-- context-sensitive online help
+- auto-completion for available LAMMPS commands and options only
+- context-sensitive online help for known LAMMPS commands
 - start and stop of simulations via mouse or keyboard
-- monitoring of simulation progress
-- interactive visualization using the :doc:`dump image <dump_image>`
+- monitoring of simulation progress and CPU use
+- interactive visualization using the LAMMPS :doc:`dump image feature <dump_image>`
   command with the option to copy-paste the resulting settings
-- automatic slide show generation from dump image out at runtime
-- automatic plotting of thermodynamics data at runtime
+- automatic slide show generation from dump image output at runtime
+- automatic plotting of thermodynamic data at runtime
 - inspection of binary restart files
+- integration will a set of LAMMPS tutorials
 
-The following text provides a detailed tour of the features and
+.. admonition:: Download LAMMPS-GUI for your platform
+   :class: Hint
+
+   Pre-compiled, ready-to-use LAMMPS-GUI executables for Linux x86\_64
+   (Ubuntu 20.04LTS or later and compatible), macOS (version 11 aka Big
+   Sur or later), and Windows (version 10 or later) :ref:`are available
+   <lammps_gui_install>` for download.  Non-MPI LAMMPS executables (as
+   ``lmp``) for running LAMMPS from the command-line and :doc:`some
+   LAMMPS tools <Tools>` compiled executables are also included.  Also,
+   the pre-compiled LAMMPS-GUI packages include the WHAM executables
+   from http://membrane.urmc.rochester.edu/content/wham/ for use with
+   LAMMPS tutorials documented in this paper (:ref:`Gravelle1
+   <Gravelle1>`).
+
+   The source code for LAMMPS-GUI is included in the LAMMPS source code
+   distribution and can be found in the ``tools/lammps-gui`` folder.  It
+   can be compiled alongside LAMMPS when :doc:`compiling with CMake
+   <Build_cmake>`.
+
+-----
+
+The following text provides a documentation of the features and
 functionality of LAMMPS-GUI.  Suggestions for new features and
 reports of bugs are always welcome.  You can use the :doc:`the same
 channels as for LAMMPS itself <Errors_bugs>` for that purpose.
@@ -92,9 +122,12 @@ channels as for LAMMPS itself <Errors_bugs>` for that purpose.
 Installing Pre-compiled LAMMPS-GUI Packages
 -------------------------------------------
 
-LAMMPS-GUI is available as pre-compiled binary packages for Linux
-x86\_64, macOS 11 and later, and Windows 10 and later.  Alternately, it
-can be compiled from source.
+LAMMPS-GUI is available for download as pre-compiled binary packages for
+Linux x86\_64 (Ubuntu 20.04LTS or later and compatible), macOS (version
+11 aka Big Sur or later), and Windows (version 10 or later) from the
+`LAMMPS release pages on GitHub <https://github.com/lammps/lammps/releases/>`_.
+A backup download location is at https://download.lammps.org/static/
+Alternately, LAMMPS-GUI can be compiled from source when building LAMMPS.
 
 Windows 10 and later
 ^^^^^^^^^^^^^^^^^^^^
@@ -216,8 +249,8 @@ editor buffer, which may contain multiple :doc:`run <run>` or
 
 LAMMPS runs in a separate thread, so the GUI stays responsive and is
 able to interact with the running calculation and access data it
-produces.  It is important to note that running LAMMPS this way is
-using the contents of the input buffer for the run (via the
+produces.  It is important to note that running LAMMPS this way is using
+the contents of the input buffer for the run (via the
 :cpp:func:`lammps_commands_string()` function of the LAMMPS C-library
 interface), and **not** the original file it was read from.  Thus, if
 there are unsaved changes in the buffer, they *will* be used.  As an
@@ -226,28 +259,55 @@ of a file from the *Run LAMMPS from File* menu entry or with
 `Ctrl-Shift-Enter`.  This option may be required in some rare cases
 where the input uses some functionality that is not compatible with
 running LAMMPS from a string buffer.  For consistency, any unsaved
-changes in the buffer must be either saved to the file or undone
-before LAMMPS can be run from a file.
+changes in the buffer must be either saved to the file or undone before
+LAMMPS can be run from a file.
+
+The line number of the currently executed command is highlighted in
+green in the line number display for the *Editor* Window.
 
 .. image:: JPG/lammps-gui-running.png
    :align: center
    :scale: 75%
 
-While LAMMPS is running, the contents of the status bar change.  On
-the left side there is a text indicating that LAMMPS is running, which
-also indicates the number of active threads, when thread-parallel
-acceleration was selected in the *Preferences* dialog.  On the right
+While LAMMPS is running, the contents of the status bar change.  The
+text fields that normally show "Ready." and the current working
+directory, change into an area showing the CPU utilization in percent.
+Nest to it is a text indicating that LAMMPS is running, which also
+indicates the number of active threads (in case thread-parallel
+acceleration was selected in the *Preferences* dialog).  On the right
 side, a progress bar is shown that displays the estimated progress for
 the current :doc:`run <run>` or :doc:`minimize <minimize>` command.
 
-Also, the line number of the currently executed command is highlighted
-in green.
+.. admonition:: CPU Utilization
+   :class: note
+
+   The CPU Utilization should ideally be close to 100% times the number
+   of threads like in the screenshot image above.  Since the GUI is
+   running as a separate thread, the CPU utilization can be higher, for
+   example when the GUI needs to work hard to keep up with the
+   simulation.  This can be caused by having frequent thermo output or
+   running a simulation of a small system.  In the *Preferences* dialog,
+   the polling interval for updating the the *Output* and *Charts*
+   windows can be set. The intervals may need to be lowered to not miss
+   data between *Charts* data updates or to avoid stalling when the
+   thermo output is not transferred to the *Output* window fast enough.
+   It is also possible to reduce the amount of data by increasing the
+   :doc:`thermo interval <thermo>`.  LAMMPS-GUI detects, if the
+   associated I/O buffer is by a significant percentage and will print a
+   warning after the run with suggested adjustments.  The utilization
+   can also be lower, e.g.  when the simulation is slowed down by the
+   GUI or other processes also running on the host computer and
+   competing with LAMMPS-GUI for GPU resources.
+
+   .. image:: JPG/lammps-gui-buffer-warn.png
+      :align: center
+      :scale: 75%
 
 If an error occurs (in the example below the command :doc:`label
 <label>` was incorrectly capitalized as "Label"), an error message
 dialog is shown and the line of the input which triggered the error is
-highlighted.  The state of LAMMPS in the status bar is set to "Failed."
-instead of "Ready."
+highlighted in red.  The state of LAMMPS in the status bar is set to
+"Failed."  instead of "Ready."
 
 .. image:: JPG/lammps-gui-run-error.png
    :align: center
@@ -334,27 +394,28 @@ plot of thermodynamic output of the LAMMPS calculation as shown below.
    :align: center
    :scale: 33%
 
-The drop down menu on the top right allows selection of different
-properties that are computed and written to thermo output.  Only one
-property can be shown at a time.  The plots are updated regularly with
-new data as the run progresses, so they can be used to visually monitor
-the evolution of available properties.  The update interval can be set
-in the *Preferences* dialog.  By default, the raw data for the selected
-property is plotted as a blue graph. As soon as there are a sufficient
-number of data points, there will be a second graph shown in red with a
-smoothed version of the data.  From the drop down menu on the top left,
-you can select whether to plot only the raw data, only the smoothed
-data or both.  The smoothing uses a `Savitzky-Golay convolution filter
-<https://en.wikipedia.org/wiki/Savitzky%E2%80%93Golay_filter>`_ The
-window width (left) and order (right) parameters can be set in the boxes
-next to the drop down menu.  Default settings are 10 and 4 which means
-that the smoothing window includes 10 points each to the left and the
-right of the current data point and a fourth order polynomial is fit to
-the data in the window.
+The "Data:" drop down menu on the top right allows selection of
+different properties that are computed and written as thermodynamic
+output to the output window.  Only one property can be shown at a time.
+The plots are updated regularly with new data as the run progresses, so
+they can be used to visually monitor the evolution of available
+properties.  The update interval can be set in the *Preferences* dialog.
+By default, the raw data for the selected property is plotted as a blue
+graph.  From the "Plot:" drop menu on the second row and on the left,
+you can select whether to plot only raw data graph, only a smoothed data
+graph, or both graphs on top of each other.  The smoothing process uses
+a `Savitzky-Golay convolution filter
+<https://en.wikipedia.org/wiki/Savitzky%E2%80%93Golay_filter>`_.  The
+convolution window width (left) and order (right) parameters can be set
+in the boxes next to the drop down menu.  Default settings are 10 and 4
+which means that the smoothing window includes 10 points each to the
+left and the right of the current data point for a total of 21 points
+and a fourth order polynomial is fitted to the data in the window.
 
-You can use the mouse to zoom into the graph (hold the left button and
-drag to mark an area) or zoom out (right click) and you can reset the
-view with a click to the "lens" button next to the data drop down menu.
+The "Title:" and "Y:" input boxes allow to edit the text shown as the
+plot title and the y-axis label, respectively.  The text entered in the
+"Title:" box is applied to *all* charts, while the "Y:" text changes
+only the y-axis label of the currently *selected* plot.
 
 The window title shows the current run number that this chart window
 corresponds to.  Same as for the *Output* window, the chart window is
@@ -382,6 +443,40 @@ here you get the compounded data set starting with the last change of
 output fields or timestep setting, while the export from the log will
 contain *all* YAML output but *segmented* into individual runs.
 
+The *Preferences* dialog has a *Charts* tab, where you can configure
+multiple chart-related settings, like the default title, colors for the
+graphs, default choice of the raw / smooth graph selection, and the
+default chart graph size.
+
+
+
+.. admonition:: Slowdown of Simulations from Charts Data Processing
+   :class: warning
+
+   Using frequent thermo output during long simulations can result in a
+   significant slowdown of that simulation since it is accumulating many
+   data points for each of the thermo properties in the chart window to
+   be redrawn with every update.  The updates are consuming additional
+   CPU time when smoothing enabled.  This slowdown can be confirmed when
+   an increasing percentage of the total run time is spent in the
+   "Output" or "Other" sections of the :doc:`MPI task timing breakdown
+   <Run_output>`.  It is thus recommended to use a large enough value as
+   argument `N` for the :doc:`thermo command <thermo>` and to select
+   plotting only the "Raw" data in the *Charts Window* during such
+   simulations.  It is always possible to switch between the different
+   display styles for charts during the simulation and after it has
+   finished.
+
+   .. versionchanged:: 1.7
+
+      As of LAMMPS-GUI version 1.7 the chart data processing is
+      significantly optimized compared to older versions of LAMMPS-GUI.
+      The general problem of accumulating excessive amounts of data
+      and the overhead of too frequently polling LAMMPS for new data
+      cannot be optimized away, though.  If necessary, the command
+      line LAMMPS executable needs to be used and the output accumulated
+      of a very fast disk (e.g. a high-performance SSD).
+
 Image Slide Show
 ----------------
 
@@ -461,11 +556,11 @@ correspond to (via their mass) and then colorize them in the image and
 set their atom diameters accordingly.  If this is not possible, for
 instance when using reduced (= 'lj') :doc:`units <units>`, then
 LAMMPS-GUI will check the current pair style and if it is a
-Lennard-Jones type potential, it will extract the *sigma* parameter
-for each atom type and assign atom diameters from those numbers.
-For cases where atom diameters are not auto-detected, the *Atom size* field
-can be edited and a suitable value set manually. The default value
-is inferred from the x-direction lattice spacing.
+Lennard-Jones type potential, it will extract the *sigma* parameter for
+each atom type and assign atom diameters from those numbers.  For cases
+where atom diameters are not auto-detected, the *Atom size* field can be
+edited and a suitable value set manually. The default value is inferred
+from the x-direction lattice spacing.
 
 If elements cannot be detected the default sequence of colors of the
 :doc:`dump image <dump_image>` command is assigned to the different atom
@@ -480,22 +575,31 @@ types.
 |gui-image1|  |gui-image2|
 
 The default image size, some default image quality settings, the view
-style and some colors can be changed in the *Preferences* dialog
-window.  From the image viewer window further adjustments can be made:
-actual image size, high-quality (SSAO) rendering, anti-aliasing, view
-style, display of box or axes, zoom factor.  The view of the system can
-be rotated horizontally and vertically.  It is also possible to only
-display the atoms within a group defined in the input script (default is
-"all").  The image can also be re-centered on the center of mass of the
-selected group.  After each change, the image is rendered again and the
-display updated.  The small palette icon on the top left is colored
-while LAMMPS is running to render the new image; it is grayed out when
-LAMMPS is finished.  When there are many atoms to render and high
-quality images with anti-aliasing are requested, re-rendering may take
-several seconds.  From the *File* menu of the image window, the
-current image can be saved to a file (keyboard shortcut `Ctrl-S`) or
-copied to the clipboard (keyboard shortcut `Ctrl-C`) for pasting the
-image into another application.
+style and some colors can be changed in the *Preferences* dialog window.
+From the image viewer window further adjustments can be made: actual
+image size, high-quality (SSAO) rendering, anti-aliasing, view style,
+display of box or axes, zoom factor.  The view of the system can be
+rotated horizontally and vertically.
+
+It is also possible to display only the atoms within a :doc:`group
+defined in the input script <group>` (default is "all").  The available
+groups can be selected from the drop down list next to the "Group:"
+label.  Similarly, if there are :doc:`molecules defined in the input
+<molecule>`, it is possible to select one of them (default is "none")
+and visualize it (it will be shown at the center of the simulation box).
+While a molecule is selected, the group selection is disabled.  It can
+be restored by selecting the molecule "none".
+
+The image can also be re-centered on the center of mass of the selected
+group.  After each change, the image is rendered again and the display
+updated.  The small palette icon on the top left is colored while LAMMPS
+is running to render the new image; it is grayed out when LAMMPS is
+finished.  When there are many atoms to render and high quality images
+with anti-aliasing are requested, re-rendering may take several seconds.
+From the *File* menu of the image window, the current image can be saved
+to a file (keyboard shortcut `Ctrl-S`) or copied to the clipboard
+(keyboard shortcut `Ctrl-C`) for pasting the image into another
+application.
 
 From the *File* menu it is also possible to copy the current
 :doc:`dump image <dump_image>` and :doc:`dump_modify <dump_image>`
@@ -604,13 +708,27 @@ generated with a :doc:`write_data command <write_data>`.  The third
 window is a :ref:`Snapshot Image Viewer <snapshot_viewer>` containing a
 visualization of the system in the restart.
 
-If the restart file is larger than 250 MBytes, a dialog will ask
-for confirmation before continuing, since large restart files
-may require large amounts of RAM since the entire system must
-be read into RAM.  Thus restart file for large simulations that
-have been run on an HPC cluster may overload a laptop or local
-workstation. The *Show Details...* button will display a rough
-estimate of the additional memory required.
+.. |inspect1| image:: JPG/lammps-gui-inspect-data.png
+   :width: 32%
+
+.. |inspect2| image:: JPG/lammps-gui-inspect-info.png
+   :width: 32%
+
+.. |inspect3| image:: JPG/lammps-gui-inspect-image.png
+   :width: 32%
+
+|inspect1|  |inspect2|  |inspect3|
+
+.. admonition:: Large Restart Files
+   :class: warning
+
+   If the restart file is larger than 250 MBytes, a dialog will ask for
+   confirmation before continuing, since large restart files may require
+   large amounts of RAM since the entire system must be read into RAM.
+   Thus restart file for large simulations that have been run on an HPC
+   cluster may overload a laptop or local workstation. The *Show
+   Details...* button will display a rough estimate of the additional
+   memory required.
 
 Menu
 ----
@@ -682,6 +800,12 @@ timestep.  The *Stop LAMMPS* entry will do this by calling the
 :cpp:func:`lammps_force_timeout` library function, which is equivalent
 to a :doc:`timer timeout 0 <timer>` command.
 
+The *Relaunch LAMMPS Instance* will destroy the current LAMMPS thread
+and free its data and then create a new thread with a new LAMMPS
+instance.  This is usually not needed, since LAMMPS-GUI tries to detect
+when this is needed and does it automatically.  This is available
+in case it missed something and LAMMPS behaves in unexpected ways.
+
 The *Set Variables...* entry opens a dialog box where
 :doc:`index style variables <variable>` can be set. Those variables
 are passed to the LAMMPS instance when it is created and are thus
@@ -720,6 +844,26 @@ output, charts, slide show, variables, or snapshot images.  The
 default settings for their visibility can be changed in the
 *Preferences* dialog.
 
+Tutorials
+^^^^^^^^^
+
+The *Tutorials* menu is to support the set of LAMMPS tutorials for
+beginners and intermediate LAMMPS users documented in (:ref:`Gravelle1
+<Gravelle1>`).  From the drop down menu you can select which of the
+eight currently available tutorial sessions you want to begin.  This
+opens a 'wizard' dialog where you can choose in which folder you want to
+work, whether you want that folder to be wiped from *any* files, whether
+you want to download the solutions files (which can be large) to a
+``solution`` sub-folder, and whether you want the corresponding
+tutorial's online version opened in your web browser.  The dialog will
+then start downloading the files requested (download progress is
+reported in the status line) and load the first input file for the
+selected session into LAMMPS-GUI.
+
+.. image:: JPG/lammps-gui-tutorials.png
+   :align: center
+   :scale: 50%
+
 About
 ^^^^^
 
@@ -783,18 +927,21 @@ look of LAMMPS-GUI.  The settings are grouped and each group is
 displayed within a tab.
 
 .. |guiprefs1| image:: JPG/lammps-gui-prefs-general.png
-   :width: 24%
+   :width: 19%
 
 .. |guiprefs2| image:: JPG/lammps-gui-prefs-accel.png
-   :width: 24%
+   :width: 19%
 
 .. |guiprefs3| image:: JPG/lammps-gui-prefs-image.png
-   :width: 24%
+   :width: 19%
 
 .. |guiprefs4| image:: JPG/lammps-gui-prefs-editor.png
-   :width: 24%
+   :width: 19%
 
-|guiprefs1|  |guiprefs2|  |guiprefs3|  |guiprefs4|
+.. |guiprefs5| image:: JPG/lammps-gui-prefs-charts.png
+   :width: 19%
+
+|guiprefs1|  |guiprefs2|  |guiprefs3|  |guiprefs4|  |guiprefs5|
 
 General Settings:
 ^^^^^^^^^^^^^^^^^
@@ -823,13 +970,12 @@ General Settings:
 - *Replace image window on new render:* when checked, an existing
   chart window will be replaced when a new snapshot image is requested,
   otherwise each command will create a new image window.
-- *Path to LAMMPS Shared Library File:* this option is only visible
-  when LAMMPS-GUI was compiled to load the LAMMPS library at run time
-  instead of being linked to it directly.  With the *Browse..* button
-  or by changing the text, a different shared library file with a
-  different compilation of LAMMPS with different settings or from a
-  different version can be loaded.  After this setting was changed,
-  LAMMPS-GUI needs to be re-launched.
+- *Download tutorial solutions enabled* this controls whether the
+  "Download solutions" option is enabled by default when setting up
+  a tutorial.
+- *Open tutorial webpage enabled* this controls whether the "Open
+  tutorial webpage in web browser" option is enabled by default when
+  setting up a tutorial.
 - *Select Default Font:* Opens a font selection dialog where the type
   and size for the default font (used for everything but the editor and
   log) of the application can be set.
@@ -848,16 +994,36 @@ General Settings:
   the plots in the *Charts* window in milliseconds.  The default is to
   redraw the plots every 500 milliseconds.  This is just for the drawing,
   data collection is managed with the previous setting.
+- *HTTPS proxy setting:* Allows to enter a URL for an HTTPS proxy.  This
+  may be needed when the LAMMPS input contains :doc:`geturl commands <geturl>`
+  or for downloading tutorial files from the *Tutorials* menu.  If the
+  ``https_proxy`` environment variable was set externally, its value is
+  displayed but cannot be changed.
+- *Path to LAMMPS Shared Library File:* this option is only visible
+  when LAMMPS-GUI was compiled to load the LAMMPS library at run time
+  instead of being linked to it directly.  With the *Browse..* button
+  or by changing the text, a different shared library file with a
+  different compilation of LAMMPS with different settings or from a
+  different version can be loaded.  After this setting was changed,
+  LAMMPS-GUI needs to be re-launched.
 
 Accelerators:
 ^^^^^^^^^^^^^
 
-This tab enables selection of an accelerator package for LAMMPS to use
-and is equivalent to using the `-suffix` and `-package` flags on the
-command-line.  Only settings supported by the LAMMPS library and local
-hardware are available.  The `Number of threads` field allows setting
-the maximum number of threads for the accelerator packages that use
-threads.
+This tab enables selection of an accelerator package and modify some of
+its settings to use for running LAMMPS and is equivalent to using the
+:doc:`-sf <suffix>` and :doc:`-pk <package>` flags :doc:`on the
+command-line <Run_options>`.  Only settings supported by the LAMMPS
+library and local hardware are available.  The `Number of threads` field
+allows setting the number of threads for the accelerator packages that
+support using threads (OPENMP, INTEL, KOKKOS, and GPU).  Furthermore,
+the choice of precision mode (double, mixed, or single) for the INTEL
+package can be selected and for the GPU package, whether the neighbor
+lists are built on the GPU or the host (required for :doc:`pair style
+hybrid <pair_hybrid>`) and whether only pair styles should be
+accelerated (i.e. run PPPM entirely on the CPU, which sometimes leads
+to better overall performance).  Whether settings can be changed depends
+on which accelerator package is chosen (or "None").
 
 Snapshot Image:
 ^^^^^^^^^^^^^^^
@@ -884,7 +1050,7 @@ lists to select the background and box colors.
 Editor Settings:
 ^^^^^^^^^^^^^^^^
 
-This tab allows tweaking settings of the editor window.  Specifically
+This tab allows tweaking settings of the editor window.  Specifically,
 the amount of padding to be added to LAMMPS commands, types or type
 ranges, IDs (e.g. for fixes), and names (e.g. for groups).  The value
 set is the minimum width for the text element and it can be chosen in
@@ -896,6 +1062,16 @@ the completion pop-up window, and whether auto-save mode is enabled.
 In auto-save mode the editor buffer is saved before a run or before
 exiting LAMMPS-GUI.
 
+Charts Settings:
+----------------
+
+This tab allows tweaking settings of the *Charts* window.  Specifically,
+one can set the default chart title (if the title contains '%f' it will
+be replaced with the name of the current input file), one can select
+whether by default the raw data, the smoothed data or both will be
+plotted, one can set the colors for the two lines, the default smoothing
+parameters, and the default size of the chart graph in pixels.
+
 -----------
 
 Keyboard Shortcuts
@@ -976,10 +1152,21 @@ available (On macOS use the Command key instead of Ctrl/Control).
      - Ctrl+Shift+T
      - LAMMPS Tutorial
 
-Further editing keybindings `are documented with the Qt documentation
+Further keybindings of the editor window `are documented with the Qt
+documentation
 <https://doc.qt.io/qt-5/qplaintextedit.html#editing-key-bindings>`_.  In
 case of conflicts the list above takes precedence.
 
 All other windows only support a subset of keyboard shortcuts listed
 above.  Typically, the shortcuts `Ctrl-/` (Stop Run), `Ctrl-W` (Close
 Window), and `Ctrl-Q` (Quit Application) are supported.
+
+-------------
+
+.. _Gravelle1:
+
+**(Gravelle1)** Gravelle, Gissinger, Kohlmeyer, `arXiv:2503.14020 \[physics.comp-ph\] <https://doi.org/10.48550/arXiv.2503.14020>`_ (2025)
+
+.. _Gravelle2:
+
+**(Gravelle2)** Gravelle https://lammpstutorials.github.io/

doc/src/Howto_moltemplate.rst

@@ -2,18 +2,14 @@ Moltemplate Tutorial
 ====================
 
 In this tutorial, we are going to use the tool :ref:`Moltemplate
-<Moltemplate1>` from https://moltemplate.org/ to set up a classical
-molecular dynamic simulation using the :ref:`OPLS-AA force field
-<oplsaa2024>`. The first task is to describe an organic compound and
-create a complete input deck for LAMMPS.  The second task is to use
-moltemplate to build a polymer.  The third task is to map the OPLS-AA
-force field to a molecular sample created with an external tool,
-e.g. PACKMOL, and exported as a PDB file.  The files used in this
-tutorial can be found in the ``tools/moltemplate/tutorial-files`` folder
-of the LAMMPS source code distribution.
-
-Many more examples can be found here: https://moltemplate.org/examples.html
-
+<moltemplate>` to set up a classical molecular dynamic simulation using
+the :ref:`OPLS-AA force field <OPLSAA96>`. The first
+task is to describe an organic compound and create a complete input deck
+for LAMMPS. The second task is to map the OPLS-AA force field to a
+molecular sample created with an external tool, e.g. PACKMOL, and
+exported as a PDB file.  The files used in this tutorial can be found
+in the ``tools/moltemplate/tutorial-files`` folder of the LAMMPS
+source code distribution.
 
 Simulating an organic solvent
 """""""""""""""""""""""""""""
@@ -21,13 +17,14 @@ Simulating an organic solvent
 This example aims to create a cubic box of the organic solvent
 formamide.
 
-The first step is to create a molecular topology in the LAMMPS-template
-(LT) file format representing a single molecule, which will be
-stored in a Moltemplate object called ``_FAM inherits OPLSAA {}``.
+The first step is to create a molecular topology in the
+LAMMPS-template (LT) file format representing a single molecule, which
+will be stored in a Moltemplate object called ``_FAM inherits OPLSAA {}``.
 This command states that the object ``_FAM`` is based on an existing
 object called ``OPLSAA``, which contains OPLS-AA parameters, atom type
 definitions, partial charges, masses and bond-angle rules for many organic
 and biological compounds.
+
 The atomic structure is the starting point to populate the command
 ``write('Data Atoms') {}``, which will write the ``Atoms`` section in the
 LAMMPS data file. The OPLS-AA force field uses the ``atom_style full``,
@@ -39,23 +36,21 @@ to the ``molID``, except that the same variable is used for the whole
 molecule. The atom types are assigned using ``@``-type variables. The
 assignment of atom types (e.g. ``@atom:177``, ``@atom:178``) is done using
 the OPLS-AA atom types defined in the "In Charges" section of the file
-``oplsaa2024.lt``, looking for a reasonable match with the description of the atom.
+``oplsaa.lt``, looking for a reasonable match with the description of the atom.
 The resulting file (``formamide.lt``) follows:
 
 .. code-block:: bash
 
-   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt  # defines OPLSAA
-
    _FAM inherits OPLSAA {
 
      # atomID    molID  atomType  charge  coordX  coordY  coordZ
      write('Data Atoms') {
-       $atom:C00  $mol  @atom:235  0.00    0.100   0.490   0.0
-       $atom:O01  $mol  @atom:236  0.00    1.091  -0.250   0.0
-       $atom:N02  $mol  @atom:237  0.00   -1.121  -0.181   0.0
-       $atom:H03  $mol  @atom:240  0.00   -2.013   0.272   0.0
-       $atom:H04  $mol  @atom:240  0.00   -1.056  -1.190   0.0
-       $atom:H05  $mol  @atom:279  0.00    0.144   1.570   0.0
+       $atom:C00 $mol   @atom:177  0.00    0.100   0.490   0.0
+       $atom:O01 $mol   @atom:178  0.00    1.091  -0.250   0.0
+       $atom:N02 $mol   @atom:179  0.00   -1.121  -0.181   0.0
+       $atom:H03 $mol   @atom:182  0.00   -2.013   0.272   0.0
+       $atom:H04 $mol   @atom:182  0.00   -1.056  -1.190   0.0
+       $atom:H05 $mol   @atom:221  0.00    0.144   1.570   0.0
      }
 
      # A list of the bonds in the molecule:
@@ -69,17 +64,16 @@ The resulting file (``formamide.lt``) follows:
      }
    }
 
-You don't have to specify the charge in this example because the OPLSAA
-force-field assigns charge according to the atom type.  (This is not true
-when using other force fields.)  A "Data Bond List" section is needed as
-the atom type will determine the bond type. The other bonded interactions
-(e.g. angles, dihedrals, and impropers) will be automatically generated by
+You don't have to specify the charge in this example because they will
+be assigned according to the atom type. Analogously, only a
+"Data Bond List" section is needed as the atom type will determine the
+bond type. The other bonded interactions (e.g. angles,
+dihedrals, and impropers) will be automatically generated by
 Moltemplate.
 
-If the simulation is not charge-neutral, or Moltemplate complains that
-you have missing bond, angle, or dihedral types, this probably means that
-at least one of your atom types is incorrect (or that perhaps there is no
-suitable atom type currently defined in the ``oplsaa2024.lt`` file).
+If the simulation is non-neutral, or Moltemplate complains that you have
+missing bond, angle, or dihedral types, this means at least one of your
+atom types is incorrect.
 
 The second step is to create a master file with instructions to build a
 starting structure and the LAMMPS commands to run an NPT simulation. The
@@ -87,9 +81,11 @@ master file (``solv_01.lt``) follows:
 
 .. code-block:: bash
 
-   import formamide.lt  # Defines "_FAM" and OPLSAA
+   # Import the force field.
+   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa.lt
+   import formamide.lt # after oplsaa.lt, as it depends on it.
 
-   # Distribute the molecules on a 5x5x5 cubic grid with spacing 4.6
+   # Create the input sample.
    solv = new _FAM [5].move( 4.6, 0, 0)
                    [5].move( 0, 4.6, 0)
                    [5].move( 0, 0, 4.6)
@@ -102,11 +98,8 @@ master file (``solv_01.lt``) follows:
     -11.5 11.5 zlo zhi
    }
 
-   # Note: The lines below in the "In Run" section are often omitted.
-
-   write_once("In Run"){
-    # Create an input deck for LAMMPS.
-    # Run an NPT simulation.
+   # Create an input deck for LAMMPS.
+   write_once("In Init"){
     # Input variables.
     variable run    string solv_01   # output name
     variable ts     equal  1         # timestep
@@ -116,6 +109,12 @@ master file (``solv_01.lt``) follows:
     variable equi   equal  5000      # Equilibration steps
     variable prod   equal  30000     # Production steps
 
+    # PBC (set them before the creation of the box).
+    boundary p p p
+   }
+
+   # Run an NPT simulation.
+   write_once("In Run"){
     # Derived variables.
     variable tcouple equal \$\{ts\}*100
     variable pcouple equal \$\{ts\}*1000
@@ -144,7 +143,7 @@ master file (``solv_01.lt``) follows:
     unfix NPT
    }
 
-The first two commands insert the content of files ``oplsaa2024.lt`` and
+The first two commands insert the content of files ``oplsaa.lt`` and
 ``formamide.lt`` into the master file. At this point, we can use the
 command ``solv = new _FAM [N]`` to create N copies of a molecule of type
 ``_FAM``. In this case, we create an array of 5*5*5 molecules on a cubic
@@ -154,37 +153,21 @@ the sample was created from scratch, we also specify the simulation box
 size in the "Data Boundary" section.
 
 The LAMMPS setting for the force field are specified in the file
-``oplsaa2024.lt`` and are written automatically in the input deck. We also
+``oplsaa.lt`` and are written automatically in the input deck. We also
 specify the boundary conditions and a set of variables in
-the "In Init" section.
-
-The remaining commands to run an NPT simulation
+the "In Init" section. The remaining commands to run an NPT simulation
 are written in the "In Run" section. Note that in this script, LAMMPS
 variables are protected with the escape character ``\`` to distinguish
 them from Moltemplate variables, e.g. ``\$\{run\}`` is a LAMMPS
 variable that is written in the input deck as ``${run}``.
 
-(Note: Moltemplate can be slow to run, so you need to change you run
-settings frequently, I recommended moving those commands (from "In Run")
-out of your .lt files and into a separate file.  Moltemplate creates a
-file named ``run.in.EXAMPLE`` for this purpose.  You can put your run
-settings and fixes that file and then invoke LAMMPS using
-``mpirun -np 4 lmp -in run.in.EXAMPLE`` instead.)
-
-
 Compile the master file with:
 
 .. code-block:: bash
 
-   moltemplate.sh solv_01.lt
-   cleanup_moltemplate.sh   # <-- optional: see below
+   moltemplate.sh -overlay-all solv_01.lt
 
-(Note: The optional "cleanup_moltemplate.sh" command deletes
-unused atom types, which sometimes makes LAMMPS run faster.
-But it does not work with many-body pair styles or dreiding-style h-bonds.
-Fortunately most force fields, including OPLSAA, don't use those features.)
-
-Then execute the simulation with the following:
+And execute the simulation with the following:
 
 .. code-block:: bash
 
@@ -197,116 +180,15 @@ Then execute the simulation with the following:
    Snapshot of the sample at the beginning and end of the simulation.
    Rendered with Ovito.
 
-
-Building a simple polymer
-"""""""""""""""""""""""""
-Moltemplate is particularly useful for building polymers (and other molecules
-with sub-units).  As an simple example, consider butane:
-
-.. figure:: JPG/butane.jpg
-
-The ``butane.lt`` file below defines Butane as a polymer containing
-4 monomers (of type ``CH3``, ``CH2``, ``CH2``, ``CH3``).
-
-.. code-block:: bash
-
-   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt  # defines OPLSAA
-
-   CH3 inherits OPLSAA {
-
-     # atomID    molID   atomType  charge   coordX   coordY    coordZ
-     write("Data Atoms") {
-       $atom:c  $mol:... @atom:54   0.0   0.000000  0.4431163  0.000000
-       $atom:h1 $mol:... @atom:60   0.0   0.000000  1.0741603  0.892431
-       $atom:h2 $mol:... @atom:60   0.0   0.000000  1.0741603 -0.892431
-       $atom:h3 $mol:... @atom:60   0.0  -0.892431 -0.1879277  0.000000
-     }
-     # (Using "$mol:..." indicates this object ("CH3") is part of a larger
-     #  molecule. Moltemplate will share the molecule-ID with that molecule.)
-
-     # A list of the bonds within the "CH3" molecular sub-unit:
-     # BondID   AtomID1   AtomID2
-     write('Data Bond List') {
-       $bond:ch1 $atom:c $atom:h1
-       $bond:ch2 $atom:c $atom:h2
-       $bond:ch3 $atom:c $atom:h3
-     }
-   }
-
-   CH2 inherits OPLSAA {
-
-     # atomID    molID   atomType  charge   coordX   coordY    coordZ
-     write("Data Atoms") {
-       $atom:c  $mol:... @atom:57   0.0   0.000000  0.4431163  0.000000
-       $atom:h1 $mol:... @atom:60   0.0   0.000000  1.0741603  0.892431
-       $atom:h2 $mol:... @atom:60   0.0   0.000000  1.0741603 -0.892431
-     }
-
-     # A list of the bonds within the "CH2" molecular sub-unit:
-     # BondID   AtomID1   AtomID2
-     write('Data Bond List') {
-       $bond:ch1 $atom:c $atom:h1
-       $bond:ch2 $atom:c $atom:h2
-     }
-   }
-
-   Butane inherits OPLSAA {
-
-     create_var {$mol}  # optional:force all monomers to share the same molecule-ID
-
-     # - Create 4 monomers
-     # - Move them along the X axis using ".move()",
-     # - Rotate them 180 degrees with respect to the previous monomer
-     monomer1 = new CH3
-     monomer2 = new CH2.rot(180,1,0,0).move(1.2533223,0,0)
-     monomer3 = new CH2.move(2.5066446,0,0)
-     monomer4 = new CH3.rot(180,0,0,1).move(3.7599669,0,0)
-
-     # A list of the bonds connecting different monomers together:
-     write('Data Bond List') {
-       $bond:b1  $atom:monomer1/c $atom:monomer2/c
-       $bond:b2  $atom:monomer2/c $atom:monomer3/c
-       $bond:b3  $atom:monomer3/c $atom:monomer4/c
-     }
-   }
-
-Again, you don't have to specify the charge in this example because OPLSAA
-assigns charges according to the atom type.
-
-This ``Butane`` object is a molecule which can be used anywhere other molecules
-can be used.  (You can arrange ``Butane`` molecules on a lattice, as we did previously.
-You can also modify individual butane molecules by adding or deleting atoms or bonds.
-You can add bonds between specific butane molecules or use ``Butane`` as a
-sub-unit to define even larger molecules.  See the moltemplate manual for details.)
-
-
-
-
-
-
-How to build a complex polymer
-""""""""""""""""""""""""""""""""""""""""""
-A similar procedure can be used to create more complicated polymers,
-such as the NIPAM polymer example shown below.  For details, see:
-
-https://github.com/jewettaij/moltemplate/tree/master/examples/all_atom/force_field_OPLSAA/NIPAM_polymer+water+ions
-
-
-
-
 Mapping an existing structure
 """""""""""""""""""""""""""""
 
 Another helpful way to use Moltemplate is mapping an existing molecular
-sample to a force field. This is useful when a complex sample is assembled
-from different simulations or created with specialized software (e.g. PACKMOL).
-(Note: The previous link shows how to build this entire system from scratch
-using only moltemplate.  However here we will assume instead that we obtained
-a PDB file for this system using PACKMOL.)
-
-As in the previous examples, all molecular species in the sample
-are defined using single-molecule Moltemplate objects.
-For this example, we use a short polymer in a box containing
+sample to a force field. This is useful when a complex sample is
+assembled from different simulations or created with specialized
+software (e.g. PACKMOL). As in the previous example, all molecular
+species in the sample must be defined using single-molecule Moltemplate
+objects.  For this example, we use a short polymer in a box containing
 water molecules and ions in the PDB file ``model.pdb``.
 
 It is essential to understand that the order of atoms in the PDB file
@@ -364,25 +246,25 @@ The resulting master LT file defining short annealing at a fixed volume
 .. code-block:: bash
 
    # Use the OPLS-AA force field for all species.
-   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa2024.lt
+   import /usr/local/moltemplate/moltemplate/force_fields/oplsaa.lt
    import PolyNIPAM.lt
 
    # Define the SPC water and ions as in the OPLS-AA
    Ca inherits OPLSAA {
      write("Data Atoms"){
-       $atom:a1  $mol:. @atom:412 0.0  0.00000 0.00000 0.000000
+       $atom:a1  $mol:. @atom:354 0.0  0.00000 0.00000 0.000000
      }
    }
    Cl inherits OPLSAA {
      write("Data Atoms"){
-       $atom:a1  $mol:. @atom:401 0.0  0.00000 0.00000 0.000000
+       $atom:a1  $mol:. @atom:344 0.0  0.00000 0.00000 0.000000
      }
    }
    SPC inherits OPLSAA {
      write("Data Atoms"){
-       $atom:O  $mol:. @atom:9991 0.  0.0000000 0.00000 0.0000000
-       $atom:H1 $mol:. @atom:9990 0.  0.8164904 0.00000 0.5773590
-       $atom:H2 $mol:. @atom:9990 0. -0.8164904 0.00000 0.5773590
+       $atom:O  $mol:. @atom:76 0.  0.0000000 0.00000 0.000000
+       $atom:H1 $mol:. @atom:77 0.  0.8164904 0.00000 0.5773590
+       $atom:H2 $mol:. @atom:77 0. -0.8164904 0.00000 0.5773590
      }
      write("Data Bond List") {
        $bond:OH1 $atom:O $atom:H1
@@ -403,15 +285,8 @@ The resulting master LT file defining short annealing at a fixed volume
      0 26 zlo zhi
    }
 
+   # Define the input variables.
    write_once("In Init"){
-     boundary p p p  # "p p p" is the default. This line is optional.
-     neighbor 3 bin  # (This line is also optional in this example.)
-   }
-
-   # Note: The lines below in the "In Run" section are often omitted.
-
-   # Run an NVT simulation.
-   write_once("In Run"){
      # Input variables.
      variable run    string sample01  # output name
      variable ts     equal  2         # timestep
@@ -419,6 +294,13 @@ The resulting master LT file defining short annealing at a fixed volume
      variable p      equal  1.        # equilibrium pressure
      variable equi   equal  30000     # equilibration steps
 
+     # PBC (set them before the creation of the box).
+     boundary p p p
+     neighbor        3 bin
+   }
+
+   # Run an NVT simulation.
+   write_once("In Run"){
      # Set the output.
      thermo          1000
      thermo_style    custom step etotal evdwl ecoul elong ebond eangle &
@@ -432,8 +314,8 @@ The resulting master LT file defining short annealing at a fixed volume
      write_data \$\{run\}.min
 
      # Set the constrains.
-     group watergroup type @atom:9991 @atom:9990
-     fix 0 watergroup shake 0.0001 10 0 b @bond:spcO_spcH a @angle:spcH_spcO_spcH
+     group watergroup type @atom:76 @atom:77
+     fix 0 watergroup shake 0.0001 10 0 b @bond:042_043 a @angle:043_042_043
 
      # Short annealing.
      timestep        \$\{ts\}
@@ -445,7 +327,7 @@ The resulting master LT file defining short annealing at a fixed volume
 
 
 In this example, the water model is SPC and it is defined in the
-``oplsaa2024.lt`` file with atom types ``@atom:9991`` and ``@atom:9990``.  For
+``oplsaa.lt`` file with atom types ``@atom:76`` and ``@atom:77``.  For
 water we also use the ``group`` and ``fix shake`` commands with
 Moltemplate ``@``-type variables, to ensure consistency with the
 numerical values assigned during compilation. To identify the bond and
@@ -454,20 +336,19 @@ are:
 
 .. code-block:: bash
 
-   replace{ @atom:9991 @atom:9991_bspcO_aspcO_dspcO_ispcO }
-   replace{ @atom:9990 @atom:9990_bspcH_aspcH_dspcH_ispcH }
+   replace{ @atom:76 @atom:76_b042_a042_d042_i042 }
+   replace{ @atom:77 @atom:77_b043_a043_d043_i043 }
 
 From which we can identify the following "Data Bonds By Type":
-``@bond:spcO_spcH @atom:*_bspcO*_a*_d*_i* @atom:*_bspcH*_a*_d*_i*``
-and "Data Angles By Type":
-``@angle:spcH_spcO_spcH @atom:*_b*_aspcH*_d*_i* @atom:*_b*_aspcO*_d*_i* @atom:*_b*_aspcH*_d*_i*``
+``@bond:042_043 @atom:*_b042*_a*_d*_i* @atom:*_b043*_a*_d*_i*`` and
+"Data Angles By Type": ``@angle:043_042_043 @atom:*_b*_a043*_d*_i*
+@atom:*_b*_a042*_d*_i* @atom:*_b*_a043*_d*_i*``
 
 Compile the master file with:
 
 .. code-block:: bash
 
-   moltemplate.sh -pdb model.pdb sample01.lt
-   cleanup_moltemplate.sh
+   moltemplate.sh -overlay-all -pdb model.pdb sample01.lt
 
 And execute the simulation with the following:
 
@@ -482,13 +363,8 @@ And execute the simulation with the following:
    Sample visualized with Ovito loading the trajectory into the DATA
    file written after minimization.
 
-
 ------------
 
-.. _oplsaa2024:
+.. _OPLSAA96:
 
-**(OPLS-AA)**  Jorgensen, W.L., Ghahremanpour, M.M., Saar, A., Tirado-Rives, J., J. Phys. Chem. B, 128(1), 250-262 (2024).
-
-.. _Moltemplate1:
-
-**(Moltemplate)**  Jewett et al., J. Mol. Biol., 433(11), 166841 (2021)
+**(OPLS-AA)**  Jorgensen, Maxwell, Tirado-Rives, J Am Chem Soc, 118(45), 11225-11236 (1996).

doc/src/Howto_peri.rst

@@ -197,7 +197,7 @@ The LPS model has a force scalar state
 .. math::
 
    \underline{t} = \frac{3K\theta}{m}\underline{\omega}\,\underline{x} +
-   \alpha \underline{\omega}\,\underline{e}^\mathrm{d}, \qquad\qquad\textrm{(3)}
+   \alpha \underline{\omega}\,\underline{e}^{\rm d}, \qquad\qquad\textrm{(3)}
 
 with :math:`K` the bulk modulus and :math:`\alpha` related to the shear
 modulus :math:`G` as
@@ -242,14 +242,14 @@ scalar state are defined, respectively, as
 
 .. math::
 
-   \underline{e}^\mathrm{i}=\frac{\theta \underline{x}}{3}, \qquad
-   \underline{e}^\mathrm{d} = \underline{e}- \underline{e}^\mathrm{i},
+   \underline{e}^{\rm i}=\frac{\theta \underline{x}}{3}, \qquad
+   \underline{e}^{\rm d} = \underline{e}- \underline{e}^{\rm i},
 
 
 where the arguments of the state functions and the vectors on which they
 operate are omitted for simplicity. We note that the LPS model is linear
 in the dilatation :math:`\theta`, and in the deviatoric part of the
-extension :math:`\underline{e}^\mathrm{d}`.
+extension :math:`\underline{e}^{\rm d}`.
 
 .. note::
 
@@ -738,8 +738,8 @@ command.
 
 This can be done, for example, by using the built-in visualizer of the
 :doc:`dump image or dump movie <dump_image>` command to create snapshot
-images or a movie. Below are example command for using dump image with
-the :ref:`example listed below <periexample>` and a set of images
+images or a movie. Below are example command lines for using dump image
+with the :ref:`example listed below <periexample>` and a set of images
 created for steps 300, 600, and 2000 this way.
 
 .. code-block:: LAMMPS