Non-Conformal Coupled (NCC): Conversion of tutorials from AMI to NCC
The following examples in the tutorials ($FOAM_TUTORIALS) directory have been converted from using AMI to the new NCC system: + compressible/rhoPimpleFoam/RAS/annularThermalMixer + incompressible/pimpleFoam/RAS/propeller + lagrangian/particleFoam/mixerVessel2D (formerly mixerVesselAMI2D) + multiphase/interFoam/RAS/mixerVessel + multiphase/interFoam/RAS/propeller + multiphase/multiphaseEulerFoam/laminar/mixerVessel2D (formerly mixerVesselAMI2D) The following tutorial has been converted from using ACMI: + incompressible/pimpleFoam/RAS/oscillatingInlet The following tutorial has been converted from using Repeat AMI: + incompressible/pimpleFoam/RAS/impeller The following tutorial has been added to demonstrate NCC's ability to create a sufficiently conservative solution in a closed domain to maintain phase fraction boundedness: + multiphase/interFoam/laminar/mixerVessel2D The following tutorials have been added to demonstrate NCC's ability to simulate partially overlapping couples on curved surfaces: + incompressible/pimpleFoam/RAS/ballValve + multiphase/compressibleInterFoam/RAS/ballValve The following tutorial has been added to provide a simple comparison of the conservation behaviour of AMI and NCC: + incompressible/pimpleFoam/laminar/nonConformalChannel The following tutorial has been removed, as there were sufficiently many examples involving this geometry: + incompressible/pimpleFoam/laminar/mixerVesselAMI2D
This commit is contained in:
Will Bainbridge
@ -9,6 +9,7 @@ FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object T;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
@ -21,6 +22,8 @@ internalField uniform $!outerInlet/T;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
innerInlet
|
||||
{
|
||||
type fixedValue;
|
||||
@ -48,7 +51,10 @@ boundaryField
|
||||
$staticWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform (0 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
innerInlet
|
||||
{
|
||||
type fixedValue;
|
||||
@ -49,7 +51,10 @@ boundaryField
|
||||
$!movingWall/U;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
$!calculated/alphat;
|
||||
@ -42,8 +44,15 @@ boundaryField
|
||||
$movingWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform $!innerInlet/epsilon;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
innerInlet
|
||||
{
|
||||
type fixedValue;
|
||||
@ -49,7 +51,15 @@ boundaryField
|
||||
$staticWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform $!innerInlet/k;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
innerInlet
|
||||
{
|
||||
type fixedValue;
|
||||
@ -49,7 +51,10 @@ boundaryField
|
||||
$staticWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
$!calculated/nut;
|
||||
@ -42,7 +44,10 @@ boundaryField
|
||||
$movingWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -22,6 +22,8 @@ internalField uniform 1e5;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
$!inlet/p;
|
||||
@ -42,7 +44,10 @@ boundaryField
|
||||
$staticWalls;
|
||||
}
|
||||
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -11,6 +11,7 @@ runApplication snappyHexMesh -overwrite
|
||||
|
||||
runApplication createBaffles -overwrite
|
||||
runApplication splitBaffles -overwrite
|
||||
runApplication createNonConformalCouples -overwrite nonCouple1 nonCouple2
|
||||
|
||||
runApplication $(getApplication)
|
||||
|
||||
|
||||
@ -24,7 +24,7 @@ mover
|
||||
|
||||
motionSolver solidBody;
|
||||
|
||||
cellZone rotatingZone;
|
||||
cellZone rotating;
|
||||
|
||||
solidBodyMotionFunction rotatingMotion;
|
||||
|
||||
|
||||
@ -32,7 +32,7 @@ writeInterval 0.02;
|
||||
|
||||
purgeWrite 0;
|
||||
|
||||
writeFormat ascii;
|
||||
writeFormat binary;
|
||||
|
||||
writePrecision 6;
|
||||
|
||||
|
||||
@ -20,21 +20,21 @@ baffles
|
||||
baffleFaces
|
||||
{
|
||||
type faceZone;
|
||||
zoneName rotatingZone;
|
||||
zoneName couple;
|
||||
|
||||
patches
|
||||
{
|
||||
master
|
||||
{
|
||||
name AMI1;
|
||||
type cyclicAMI;
|
||||
neighbourPatch AMI2;
|
||||
name nonCouple1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
}
|
||||
slave
|
||||
{
|
||||
$master;
|
||||
name AMI2;
|
||||
neighbourPatch AMI1;
|
||||
name nonCouple2;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -52,4 +52,5 @@ snGradSchemes
|
||||
default corrected;
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -19,9 +19,7 @@ solvers
|
||||
p
|
||||
{
|
||||
solver GAMG;
|
||||
|
||||
smoother GaussSeidel;
|
||||
|
||||
tolerance 1e-6;
|
||||
relTol 0.01;
|
||||
}
|
||||
@ -39,6 +37,14 @@ solvers
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
MeshPhi
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
tolerance 1e-2;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
"(rho|U|h|k|epsilon|omega)"
|
||||
{
|
||||
solver smoothSolver;
|
||||
@ -52,13 +58,13 @@ solvers
|
||||
$U;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
PIMPLE
|
||||
{
|
||||
momentumPredictor yes;
|
||||
transonic no;
|
||||
correctMeshPhi yes;
|
||||
nOuterCorrectors 3;
|
||||
nCorrectors 1;
|
||||
nNonOrthogonalCorrectors 0;
|
||||
|
||||
@ -19,10 +19,10 @@ addLayers false;
|
||||
|
||||
geometry
|
||||
{
|
||||
AMI
|
||||
couple
|
||||
{
|
||||
type triSurfaceMesh;
|
||||
file "AMI.obj";
|
||||
file "couple.obj";
|
||||
}
|
||||
|
||||
innerInlet
|
||||
@ -85,7 +85,7 @@ castellatedMeshControls
|
||||
features
|
||||
(
|
||||
{
|
||||
file "AMI.eMesh";
|
||||
file "couple.eMesh";
|
||||
level 2;
|
||||
}
|
||||
{
|
||||
@ -108,11 +108,11 @@ castellatedMeshControls
|
||||
|
||||
refinementSurfaces
|
||||
{
|
||||
AMI
|
||||
couple
|
||||
{
|
||||
level (2 2);
|
||||
faceZone rotatingZone;
|
||||
cellZone rotatingZone;
|
||||
faceZone couple;
|
||||
cellZone rotating;
|
||||
mode inside;
|
||||
}
|
||||
|
||||
|
||||
@ -15,7 +15,7 @@ FoamFile
|
||||
|
||||
surfaces
|
||||
(
|
||||
"AMI.obj"
|
||||
"couple.obj"
|
||||
"shaft.obj"
|
||||
"wall.obj"
|
||||
"statorBlades.obj"
|
||||
|
||||
46
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/U
Normal file
46
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/U
Normal file
@ -0,0 +1,46 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volVectorField;
|
||||
object U;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 1 -1 0 0 0 0];
|
||||
|
||||
internalField uniform (0 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type pressureInletOutletVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
lowerOutlet
|
||||
{
|
||||
type pressureInletOutletVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
upperOutlet
|
||||
{
|
||||
type pressureInletOutletVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type movingWallVelocity;
|
||||
value uniform (0 0 0);
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -20,46 +20,31 @@ internalField uniform 1.8e-3;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
type turbulentMixingLengthDissipationRateInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
outlet
|
||||
lowerOutlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
type turbulentMixingLengthDissipationRateInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
walls
|
||||
upperOutlet
|
||||
{
|
||||
type turbulentMixingLengthDissipationRateInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
defaultFaces
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
ACMI1_blockage
|
||||
{
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI1_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI2_blockage
|
||||
{
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI2_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
51
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/k
Normal file
51
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/k
Normal file
@ -0,0 +1,51 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object k;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 2 -2 0 0 0 0];
|
||||
|
||||
internalField uniform 3.75e-3;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type turbulentIntensityKineticEnergyInlet;
|
||||
intensity 0.05;
|
||||
value $internalField;
|
||||
}
|
||||
lowerOutlet
|
||||
{
|
||||
type turbulentIntensityKineticEnergyInlet;
|
||||
intensity 0.05;
|
||||
value $internalField;
|
||||
}
|
||||
upperOutlet
|
||||
{
|
||||
type turbulentIntensityKineticEnergyInlet;
|
||||
intensity 0.05;
|
||||
value $internalField;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -9,49 +9,40 @@ FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
object p;
|
||||
location "0";
|
||||
object nut;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [1 -1 -2 0 0 0 0];
|
||||
dimensions [0 2 -1 0 0 0 0];
|
||||
|
||||
internalField uniform 1e5;
|
||||
internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
rotor
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type calculated;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
stator
|
||||
lowerOutlet
|
||||
{
|
||||
type calculated;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
front
|
||||
upperOutlet
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
back
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
AMI1
|
||||
{
|
||||
type cyclicAMI;
|
||||
type calculated;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
AMI2
|
||||
wall
|
||||
{
|
||||
type cyclicAMI;
|
||||
type nutkWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
// ************************************************************************* //
|
||||
51
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/omega
Normal file
51
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/omega
Normal file
@ -0,0 +1,51 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object omega;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 0 -1 0 0 0 0];
|
||||
|
||||
internalField uniform 5.33333;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type turbulentMixingLengthFrequencyInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
lowerOutlet
|
||||
{
|
||||
type turbulentMixingLengthFrequencyInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
upperOutlet
|
||||
{
|
||||
type turbulentMixingLengthFrequencyInlet;
|
||||
mixingLength 0.1;
|
||||
value $internalField;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type omegaWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
46
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/p
Normal file
46
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/p
Normal file
@ -0,0 +1,46 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object p;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 2 -2 0 0 0 0];
|
||||
|
||||
internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type totalPressure;
|
||||
p0 uniform 10;
|
||||
}
|
||||
lowerOutlet
|
||||
{
|
||||
type entrainmentPressure;
|
||||
p0 uniform 0;
|
||||
}
|
||||
upperOutlet
|
||||
{
|
||||
type entrainmentPressure;
|
||||
p0 uniform 0;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
49
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/s
Normal file
49
tutorials/incompressible/pimpleFoam/RAS/ballValve/0/s
Normal file
@ -0,0 +1,49 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object s;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 0 0 0 0 0 0];
|
||||
|
||||
internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
lowerOutlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
upperOutlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
wall
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
7
tutorials/incompressible/pimpleFoam/RAS/ballValve/Allclean
Executable file
7
tutorials/incompressible/pimpleFoam/RAS/ballValve/Allclean
Executable file
@ -0,0 +1,7 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd "${0%/*}" || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/CleanFunctions
|
||||
|
||||
cleanCase && rm -rf 0/reconstruct\(phi\) constant/geometry flowRate.eps error.eps
|
||||
31
tutorials/incompressible/pimpleFoam/RAS/ballValve/Allrun
Executable file
31
tutorials/incompressible/pimpleFoam/RAS/ballValve/Allrun
Executable file
@ -0,0 +1,31 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd ${0%/*} || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
# Copy torus surface from resources directory
|
||||
mkdir constant/geometry && cp $FOAM_TUTORIALS/resources/geometry/ballValve-torus.obj.gz constant/geometry
|
||||
|
||||
# Mesh
|
||||
runApplication blockMesh -dict $FOAM_TUTORIALS/resources/blockMesh/ballValve
|
||||
runApplication topoSet
|
||||
runApplication transformPoints -pointSet ball "Rz=-45"
|
||||
|
||||
# Create couples
|
||||
runApplication createNonConformalCouples -overwrite pipeNonCouple ballNonCouple
|
||||
|
||||
# Decompose
|
||||
runApplication decomposePar -cellDist
|
||||
|
||||
# Set the value of the scalar transport field
|
||||
runParallel setFields
|
||||
|
||||
# Run
|
||||
runParallel $(getApplication);
|
||||
|
||||
# Reconstruct
|
||||
runApplication reconstructPar -newTimes
|
||||
|
||||
# Plot the flow rates
|
||||
./createGraphs
|
||||
@ -22,13 +22,13 @@ mover
|
||||
|
||||
motionSolver solidBody;
|
||||
|
||||
cellZone rotor;
|
||||
cellZone ball;
|
||||
|
||||
solidBodyMotionFunction rotatingMotion;
|
||||
solidBodyMotionFunction oscillatingRotatingMotion;
|
||||
|
||||
origin (0 0 0);
|
||||
axis (0 0 1);
|
||||
omega 6.2832; // rad/s
|
||||
amplitude (0 0 45);
|
||||
omega 6.283185307179586;
|
||||
}
|
||||
|
||||
|
||||
@ -0,0 +1,29 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "constant";
|
||||
object momentumTransport;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
simulationType RAS;
|
||||
|
||||
RAS
|
||||
{
|
||||
model kOmegaSST; //kEpsilon;
|
||||
|
||||
turbulence on;
|
||||
|
||||
printCoeffs on;
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
30
tutorials/incompressible/pimpleFoam/RAS/ballValve/createGraphs
Executable file
30
tutorials/incompressible/pimpleFoam/RAS/ballValve/createGraphs
Executable file
@ -0,0 +1,30 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd ${0%/*} || exit 1
|
||||
|
||||
inletFlowRate=postProcessing/inletFlowRate/0/surfaceFieldValue.dat
|
||||
lowerOutletFlowRate=postProcessing/lowerOutletFlowRate/0/surfaceFieldValue.dat
|
||||
upperOutletFlowRate=postProcessing/upperOutletFlowRate/0/surfaceFieldValue.dat
|
||||
|
||||
gnuplot << EOF
|
||||
set terminal postscript eps color enhanced
|
||||
set output "flowRate.eps"
|
||||
set xlabel "Time (s)"
|
||||
set ylabel "Flow Rate (m^3/s)"
|
||||
plot \
|
||||
"$inletFlowRate" us 1:(-\$2) every 10 w p t "Inlet", \
|
||||
"$lowerOutletFlowRate" us 1:2 w l t "Lower Outlet", \
|
||||
"$upperOutletFlowRate" us 1:2 w l t "Upper Outlet", \
|
||||
"< paste $lowerOutletFlowRate $upperOutletFlowRate" \
|
||||
us 1:(\$2+\$4) w l t "Total Outlet"
|
||||
EOF
|
||||
|
||||
gnuplot << EOF
|
||||
set terminal postscript eps color enhanced
|
||||
set output "error.eps"
|
||||
set xlabel "Time (s)"
|
||||
set ylabel "Inlet-Outlet Conservation Error (%)"
|
||||
plot \
|
||||
"< paste $inletFlowRate $lowerOutletFlowRate $upperOutletFlowRate" \
|
||||
us 1:(100*(\$2+\$4+\$6)/\$2) w l t ''
|
||||
EOF
|
||||
@ -16,19 +16,19 @@ FoamFile
|
||||
|
||||
application pimpleFoam;
|
||||
|
||||
startFrom startTime;
|
||||
startFrom latestTime;
|
||||
|
||||
startTime 0;
|
||||
|
||||
stopAt endTime;
|
||||
|
||||
endTime 5;
|
||||
endTime 1;
|
||||
|
||||
deltaT 1e-3;
|
||||
|
||||
writeControl adjustableRunTime;
|
||||
|
||||
writeInterval 0.05;
|
||||
writeInterval 0.01;
|
||||
|
||||
purgeWrite 0;
|
||||
|
||||
@ -50,37 +50,13 @@ maxCo 0.5;
|
||||
|
||||
functions
|
||||
{
|
||||
cartesianToCylindrical
|
||||
{
|
||||
type cylindrical;
|
||||
libs ("libfieldFunctionObjects.so");
|
||||
|
||||
origin (0 0 0);
|
||||
axis (0 0 1);
|
||||
|
||||
field U;
|
||||
|
||||
writeControl outputTime;
|
||||
writeInterval 1;
|
||||
}
|
||||
|
||||
#includeFunc fieldAverage(cylindrical(U))
|
||||
|
||||
cylindricalToCartesian
|
||||
{
|
||||
type cylindrical;
|
||||
libs ("libfieldFunctionObjects.so");
|
||||
|
||||
origin (0 0 0);
|
||||
axis (0 0 1);
|
||||
|
||||
field cylindrical(U)Mean;
|
||||
toCartesian true;
|
||||
result UMean;
|
||||
|
||||
writeControl outputTime;
|
||||
writeInterval 1;
|
||||
}
|
||||
#includeFunc patchFlowRate(funcName=inletFlowRate, patch=inlet)
|
||||
#includeFunc patchFlowRate(funcName=lowerOutletFlowRate, patch=lowerOutlet)
|
||||
#includeFunc patchFlowRate(funcName=upperOutletFlowRate, patch=upperOutlet)
|
||||
#includeFunc scalarTransport(s)
|
||||
#includeFunc reconstruct(phi)
|
||||
#includeFunc streamlinesPatch(patch=inlet, nPoints=100, U=reconstruct(phi))
|
||||
#includeFunc wallsSurface
|
||||
}
|
||||
|
||||
|
||||
@ -0,0 +1,28 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object decomposeParDict;
|
||||
}
|
||||
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
numberOfSubdomains 8;
|
||||
|
||||
method scotch;
|
||||
|
||||
hierarchicalCoeffs
|
||||
{
|
||||
n (2 2 2);
|
||||
order xyz;
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,64 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "system";
|
||||
object fvSchemes;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
ddtSchemes
|
||||
{
|
||||
default Euler;
|
||||
}
|
||||
|
||||
gradSchemes
|
||||
{
|
||||
default Gauss linear;
|
||||
grad(U) cellLimited Gauss linear 1;
|
||||
grad(k) cellLimited Gauss linear 1;
|
||||
grad(epsilon) cellLimited Gauss linear 1;
|
||||
grad(omega) cellLimited Gauss linear 1;
|
||||
}
|
||||
|
||||
divSchemes
|
||||
{
|
||||
default none;
|
||||
div(phi,U) Gauss linearUpwind grad(U);
|
||||
div(phi,k) Gauss limitedLinear 1;
|
||||
div(phi,epsilon) Gauss limitedLinear 1;
|
||||
div(phi,omega) Gauss limitedLinear 1;
|
||||
div(phi,s) Gauss limitedLinear 1;
|
||||
div((nuEff*dev2(T(grad(U))))) Gauss linear;
|
||||
}
|
||||
|
||||
laplacianSchemes
|
||||
{
|
||||
default Gauss linear corrected;
|
||||
}
|
||||
|
||||
interpolationSchemes
|
||||
{
|
||||
default linear;
|
||||
}
|
||||
|
||||
snGradSchemes
|
||||
{
|
||||
default corrected;
|
||||
}
|
||||
|
||||
wallDist
|
||||
{
|
||||
method meshWave;
|
||||
correctWalls false;
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -20,8 +20,6 @@ solvers
|
||||
{
|
||||
solver GAMG;
|
||||
smoother GaussSeidel;
|
||||
cacheAgglomeration no;
|
||||
|
||||
tolerance 0.02;
|
||||
relTol 0;
|
||||
}
|
||||
@ -29,37 +27,27 @@ solvers
|
||||
p
|
||||
{
|
||||
$pcorr;
|
||||
tolerance 1e-06;
|
||||
tolerance 1e-6;
|
||||
relTol 0.01;
|
||||
}
|
||||
|
||||
pFinal
|
||||
{
|
||||
$p;
|
||||
tolerance 1e-06;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
U
|
||||
"(U|k|epsilon|omega|s)"
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother GaussSeidel;
|
||||
tolerance 1e-05;
|
||||
solver PBiCGStab;
|
||||
preconditioner DILU;
|
||||
tolerance 1e-5;
|
||||
relTol 0.01;
|
||||
}
|
||||
|
||||
UFinal
|
||||
"(U|k|epsilon|omega|s)Final"
|
||||
{
|
||||
$U;
|
||||
tolerance 1e-06;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
cellMotionUx
|
||||
{
|
||||
solver PCG;
|
||||
preconditioner DIC;
|
||||
tolerance 1e-08;
|
||||
relTol 0;
|
||||
}
|
||||
}
|
||||
@ -67,12 +55,10 @@ solvers
|
||||
PIMPLE
|
||||
{
|
||||
correctPhi yes;
|
||||
correctMeshPhi no;
|
||||
nOuterCorrectors 2;
|
||||
nCorrectors 1;
|
||||
nNonOrthogonalCorrectors 0;
|
||||
|
||||
pRefCell 0;
|
||||
pRefValue 0;
|
||||
}
|
||||
|
||||
relaxationFactors
|
||||
@ -0,0 +1,37 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object setFieldsDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
defaultFieldValues
|
||||
(
|
||||
volScalarFieldValue s 0
|
||||
);
|
||||
|
||||
regions
|
||||
(
|
||||
cylinderToFace
|
||||
{
|
||||
point1 (-0.51 0 0);
|
||||
point2 (-0.49 0 0);
|
||||
radius 0.05;
|
||||
|
||||
fieldValues
|
||||
(
|
||||
volScalarFieldValue s 1
|
||||
);
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -15,16 +15,20 @@ FoamFile
|
||||
|
||||
actions
|
||||
(
|
||||
// Get both sides of ami
|
||||
// ~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
// Get all faces in cellSet
|
||||
{
|
||||
name AMI;
|
||||
type faceSet;
|
||||
action new;
|
||||
source patchToFace;
|
||||
patch "AMI.*";
|
||||
type cellSet;
|
||||
name ball;
|
||||
source zoneToCell;
|
||||
zone ball;
|
||||
}
|
||||
{
|
||||
action new;
|
||||
type pointSet;
|
||||
name ball;
|
||||
source cellToPoint;
|
||||
set ball;
|
||||
option all;
|
||||
}
|
||||
);
|
||||
|
||||
@ -0,0 +1,31 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
type surfaces;
|
||||
libs ("libsampling.so");
|
||||
|
||||
writeControl writeTime;
|
||||
|
||||
surfaceFormat vtk;
|
||||
|
||||
interpolationScheme cell;
|
||||
interpolate false;
|
||||
|
||||
fields ();
|
||||
|
||||
surfaces
|
||||
(
|
||||
walls
|
||||
{
|
||||
type patch;
|
||||
interpolate $interpolate;
|
||||
patches (pipeWalls pipeNonCouple ballWalls ballNonCouple);
|
||||
}
|
||||
);
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -28,16 +28,22 @@ boundaryField
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
stationaryWalls
|
||||
"(statorDuct|nonCoupleIn1|nonCoupleOut2)"
|
||||
{
|
||||
type noSlip;
|
||||
}
|
||||
|
||||
movingWalls
|
||||
"(rotorDuct|rotorBlades|nonCoupleIn2|nonCoupleOut1)"
|
||||
{
|
||||
type movingWallVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type movingWallSlipVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -34,6 +34,11 @@ boundaryField
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -34,6 +34,11 @@ boundaryField
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -33,6 +33,12 @@ boundaryField
|
||||
type nutkWallFunction;
|
||||
value uniform 0;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type calculated;
|
||||
value uniform 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -24,7 +24,7 @@ boundaryField
|
||||
|
||||
"(inlet|outlet)"
|
||||
{
|
||||
type totalPressure;
|
||||
type entrainmentPressure;
|
||||
p0 $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
@ -33,6 +33,11 @@ boundaryField
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
7
tutorials/incompressible/pimpleFoam/RAS/impeller/Allclean
Executable file
7
tutorials/incompressible/pimpleFoam/RAS/impeller/Allclean
Executable file
@ -0,0 +1,7 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd "${0%/*}" || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/CleanFunctions
|
||||
|
||||
cleanCase && rm -f 0/cylindrical\(U\)
|
||||
@ -6,8 +6,6 @@ cd "${0%/*}" || exit 1
|
||||
|
||||
runApplication blockMesh
|
||||
|
||||
runApplication decomposePar
|
||||
runApplication createNonConformalCouples -overwrite
|
||||
|
||||
runParallel $(getApplication)
|
||||
|
||||
runApplication reconstructPar
|
||||
runApplication $(getApplication)
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -83,15 +83,9 @@ edges
|
||||
arc 15 31 (2 $r4 0)
|
||||
);
|
||||
|
||||
defaultPatch
|
||||
{
|
||||
name movingWalls;
|
||||
type wall;
|
||||
}
|
||||
|
||||
boundary
|
||||
(
|
||||
stationaryWalls
|
||||
statorDuct
|
||||
{
|
||||
type wall;
|
||||
faces
|
||||
@ -103,6 +97,34 @@ boundary
|
||||
);
|
||||
}
|
||||
|
||||
rotorDuct
|
||||
{
|
||||
type wall;
|
||||
faces
|
||||
(
|
||||
(0 1 17 16)
|
||||
(1 2 18 17)
|
||||
(0 5 21 16)
|
||||
(5 10 26 21)
|
||||
(6 7 23 22)
|
||||
(6 11 27 22)
|
||||
);
|
||||
}
|
||||
|
||||
rotorBlades
|
||||
{
|
||||
type wall;
|
||||
faces
|
||||
(
|
||||
(0 1 6 5)
|
||||
(1 2 7 6)
|
||||
(5 6 11 10)
|
||||
(16 17 22 21)
|
||||
(17 18 23 22)
|
||||
(21 22 27 26)
|
||||
);
|
||||
}
|
||||
|
||||
inlet
|
||||
{
|
||||
type patch;
|
||||
@ -141,22 +163,20 @@ boundary
|
||||
);
|
||||
}
|
||||
|
||||
cyclicRepeatAMIIn1
|
||||
nonCoupleIn1
|
||||
{
|
||||
type cyclicRepeatAMI;
|
||||
neighbourPatch cyclicRepeatAMIIn2;
|
||||
transformPatch cyclicIn1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(3 8 24 19)
|
||||
);
|
||||
}
|
||||
|
||||
cyclicRepeatAMIIn2
|
||||
nonCoupleIn2
|
||||
{
|
||||
type cyclicRepeatAMI;
|
||||
neighbourPatch cyclicRepeatAMIIn1;
|
||||
transformPatch cyclicIn1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(2 7 23 18)
|
||||
@ -183,22 +203,20 @@ boundary
|
||||
);
|
||||
}
|
||||
|
||||
cyclicRepeatAMIOut1
|
||||
nonCoupleOut1
|
||||
{
|
||||
type cyclicRepeatAMI;
|
||||
neighbourPatch cyclicRepeatAMIOut2;
|
||||
transformPatch cyclicIn1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(10 11 27 26)
|
||||
);
|
||||
}
|
||||
|
||||
cyclicRepeatAMIOut2
|
||||
nonCoupleOut2
|
||||
{
|
||||
type cyclicRepeatAMI;
|
||||
neighbourPatch cyclicRepeatAMIOut1;
|
||||
transformPatch cyclicIn1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(12 13 29 28)
|
||||
|
||||
@ -50,10 +50,23 @@ maxCo 1.0;
|
||||
|
||||
functions
|
||||
{
|
||||
#includeFunc patchFlowRate(patch=inlet)
|
||||
#includeFunc patchFlowRate(patch=outlet)
|
||||
#includeFunc triSurfaceVolumetricFlowRate(name=surface0.stl)
|
||||
#includeFunc triSurfaceVolumetricFlowRate(name=surface1.stl)
|
||||
#includeFunc patchFlowRate(patch=inlet, funcName=inletFlowRate)
|
||||
#includeFunc patchFlowRate(patch=outlet, funcName=outletFlowRate)
|
||||
|
||||
cartesianToCylindrical
|
||||
{
|
||||
type cylindrical;
|
||||
libs ("libfieldFunctionObjects.so");
|
||||
|
||||
origin (0 0 0);
|
||||
axis (1 0 0);
|
||||
|
||||
field U;
|
||||
|
||||
writeControl outputTime;
|
||||
writeInterval 1;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
|
||||
@ -0,0 +1,69 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "system";
|
||||
object createNonConformalCouplesDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
nonConformalCoupleIn0
|
||||
{
|
||||
patches (nonCoupleIn1 nonCoupleIn2);
|
||||
transform none;
|
||||
}
|
||||
|
||||
nonConformalCoupleIn30
|
||||
{
|
||||
$nonConformalCoupleIn0;
|
||||
transform rotational;
|
||||
rotationAxis (-1 0 0);
|
||||
rotationCentre (0 0 0);
|
||||
rotationAngle 30;
|
||||
}
|
||||
|
||||
nonConformalCoupleIn60 { $nonConformalCoupleIn30; rotationAngle 60; }
|
||||
nonConformalCoupleIn90 { $nonConformalCoupleIn30; rotationAngle 90; }
|
||||
nonConformalCoupleIn120 { $nonConformalCoupleIn30; rotationAngle 120; }
|
||||
nonConformalCoupleIn150 { $nonConformalCoupleIn30; rotationAngle 150; }
|
||||
nonConformalCoupleIn180 { $nonConformalCoupleIn30; rotationAngle 180; }
|
||||
nonConformalCoupleIn210 { $nonConformalCoupleIn30; rotationAngle 210; }
|
||||
nonConformalCoupleIn240 { $nonConformalCoupleIn30; rotationAngle 240; }
|
||||
nonConformalCoupleIn270 { $nonConformalCoupleIn30; rotationAngle 270; }
|
||||
nonConformalCoupleIn300 { $nonConformalCoupleIn30; rotationAngle 300; }
|
||||
nonConformalCoupleIn330 { $nonConformalCoupleIn30; rotationAngle 330; }
|
||||
|
||||
nonConformalCoupleOut0
|
||||
{
|
||||
patches (nonCoupleOut1 nonCoupleOut2);
|
||||
transform none;
|
||||
}
|
||||
|
||||
nonConformalCoupleOut30
|
||||
{
|
||||
patches (nonCoupleOut1 nonCoupleOut2);
|
||||
transform rotational;
|
||||
rotationAxis (-1 0 0);
|
||||
rotationCentre (0 0 0);
|
||||
rotationAngle -30;
|
||||
}
|
||||
|
||||
nonConformalCoupleOut60 { $nonConformalCoupleOut30; rotationAngle -60; }
|
||||
nonConformalCoupleOut90 { $nonConformalCoupleOut30; rotationAngle -90; }
|
||||
nonConformalCoupleOut120 { $nonConformalCoupleOut30; rotationAngle -120; }
|
||||
nonConformalCoupleOut150 { $nonConformalCoupleOut30; rotationAngle -150; }
|
||||
nonConformalCoupleOut180 { $nonConformalCoupleOut30; rotationAngle -180; }
|
||||
nonConformalCoupleOut210 { $nonConformalCoupleOut30; rotationAngle -210; }
|
||||
nonConformalCoupleOut240 { $nonConformalCoupleOut30; rotationAngle -240; }
|
||||
nonConformalCoupleOut270 { $nonConformalCoupleOut30; rotationAngle -270; }
|
||||
nonConformalCoupleOut300 { $nonConformalCoupleOut30; rotationAngle -300; }
|
||||
nonConformalCoupleOut330 { $nonConformalCoupleOut30; rotationAngle -330; }
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -54,13 +54,11 @@ solvers
|
||||
|
||||
PIMPLE
|
||||
{
|
||||
correctPhi yes;
|
||||
correctPhi no;
|
||||
correctMeshPhi no;
|
||||
nOuterCorrectors 2;
|
||||
nCorrectors 1;
|
||||
nNonOrthogonalCorrectors 0;
|
||||
|
||||
pRefCell 0;
|
||||
pRefValue 0;
|
||||
}
|
||||
|
||||
relaxationFactors
|
||||
|
||||
@ -20,43 +20,30 @@ internalField uniform (0 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value uniform (1 0 0);
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type pressureInletOutletVelocity;
|
||||
value uniform (0 0 0);
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
// type fixedValue;
|
||||
type movingWallVelocity;
|
||||
value uniform (0 0 0);
|
||||
value $internalField;
|
||||
}
|
||||
defaultFaces
|
||||
|
||||
"nonCouple.*"
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
ACMI1_blockage
|
||||
{
|
||||
type noSlip;
|
||||
}
|
||||
ACMI1_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value uniform (0 0 0);
|
||||
}
|
||||
ACMI2_blockage
|
||||
{
|
||||
type noSlip;
|
||||
}
|
||||
ACMI2_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value uniform (0 0 0);
|
||||
type movingWallVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
@ -16,43 +16,36 @@ FoamFile
|
||||
|
||||
dimensions [0 2 -3 0 0 0 0];
|
||||
|
||||
internalField uniform 20;
|
||||
internalField uniform 1.8e-3;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
rotor
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
stator
|
||||
"nonCouple.*"
|
||||
{
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
front
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
back
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
AMI1
|
||||
{
|
||||
type cyclicAMI;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
AMI2
|
||||
{
|
||||
type cyclicAMI;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -20,46 +20,32 @@ internalField uniform 3.75e-3;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
defaultFaces
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
ACMI1_blockage
|
||||
|
||||
"nonCouple.*"
|
||||
{
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI1_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI2_blockage
|
||||
{
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
ACMI2_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -20,37 +20,30 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
rotor
|
||||
{
|
||||
type nutkWallFunction;
|
||||
value uniform 0;
|
||||
}
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
stator
|
||||
inlet
|
||||
{
|
||||
type nutkWallFunction;
|
||||
value uniform 0;
|
||||
}
|
||||
|
||||
front
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
back
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
AMI1
|
||||
{
|
||||
type cyclicAMI;
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
AMI2
|
||||
outlet
|
||||
{
|
||||
type cyclicAMI;
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type nutkWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
"nonCouple.*"
|
||||
{
|
||||
type nutkWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,52 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object omega;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 0 -1 0 0 0 0];
|
||||
|
||||
internalField uniform 5.33333;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type omegaWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
"nonCouple.*"
|
||||
{
|
||||
type omegaWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -9,6 +9,7 @@ FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object p;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
@ -19,37 +20,29 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
rotor
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
|
||||
stator
|
||||
outlet
|
||||
{
|
||||
type fixedValue;
|
||||
value uniform 0;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
|
||||
front
|
||||
"nonCouple.*"
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
back
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
AMI1
|
||||
{
|
||||
type cyclicAMI;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
AMI2
|
||||
{
|
||||
type cyclicAMI;
|
||||
value $internalField;
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
11
tutorials/incompressible/pimpleFoam/RAS/oscillatingInlet/Allrun
Executable file
11
tutorials/incompressible/pimpleFoam/RAS/oscillatingInlet/Allrun
Executable file
@ -0,0 +1,11 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd ${0%/*} || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
runApplication blockMesh
|
||||
|
||||
runApplication createNonConformalCouples -overwrite nonCouple1 nonCouple2
|
||||
|
||||
runApplication $(getApplication)
|
||||
@ -18,7 +18,7 @@ simulationType RAS;
|
||||
|
||||
RAS
|
||||
{
|
||||
model kEpsilon;
|
||||
model realizableKE;
|
||||
|
||||
turbulence on;
|
||||
|
||||
@ -38,14 +38,13 @@ vertices
|
||||
|
||||
blocks
|
||||
(
|
||||
hex (0 1 2 3 4 5 6 7) (80 40 1) simpleGrading (1 1 1)
|
||||
hex (0 1 2 3 4 5 6 7) inletChannel (80 40 1) simpleGrading (1 1 1)
|
||||
hex (8 9 10 11 12 13 14 15) (80 96 1) simpleGrading (1 1 1)
|
||||
);
|
||||
|
||||
defaultPatch
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
edges
|
||||
(
|
||||
);
|
||||
|
||||
boundary
|
||||
(
|
||||
@ -76,17 +75,17 @@ boundary
|
||||
(9 13 12 8)
|
||||
);
|
||||
}
|
||||
couple1
|
||||
nonCouple1
|
||||
{
|
||||
type patch;
|
||||
type wall;
|
||||
faces
|
||||
(
|
||||
(2 6 5 1)
|
||||
);
|
||||
}
|
||||
couple2
|
||||
nonCouple2
|
||||
{
|
||||
type patch;
|
||||
type wall;
|
||||
faces
|
||||
(
|
||||
(8 12 15 11)
|
||||
@ -94,5 +93,8 @@ boundary
|
||||
}
|
||||
);
|
||||
|
||||
mergePatchPairs
|
||||
(
|
||||
);
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -48,5 +48,11 @@ adjustTimeStep true;
|
||||
|
||||
maxCo 0.5;
|
||||
|
||||
functions
|
||||
{
|
||||
#includeFunc patchFlowRate(patch=inlet, funcName=inletFlowRate)
|
||||
#includeFunc patchFlowRate(patch=outlet, funcName=outletFlowRate)
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -29,16 +29,16 @@ gradSchemes
|
||||
divSchemes
|
||||
{
|
||||
default none;
|
||||
// div(phi,U) Gauss upwind;
|
||||
div(phi,U) Gauss linearUpwind grad(U);
|
||||
div(phi,k) Gauss upwind;
|
||||
div(phi,epsilon) Gauss upwind;
|
||||
div(phi,omega) Gauss upwind;
|
||||
div((nuEff*dev2(T(grad(U))))) Gauss linear;
|
||||
}
|
||||
|
||||
laplacianSchemes
|
||||
{
|
||||
default Gauss linear limited corrected 0.33;
|
||||
default Gauss linear corrected;
|
||||
}
|
||||
|
||||
interpolationSchemes
|
||||
@ -48,7 +48,7 @@ interpolationSchemes
|
||||
|
||||
snGradSchemes
|
||||
{
|
||||
default limited corrected 0.33;
|
||||
default corrected;
|
||||
}
|
||||
|
||||
|
||||
@ -18,39 +18,35 @@ solvers
|
||||
"pcorr.*"
|
||||
{
|
||||
solver GAMG;
|
||||
smoother GaussSeidel;
|
||||
tolerance 1e-2;
|
||||
relTol 0;
|
||||
smoother GaussSeidel;
|
||||
cacheAgglomeration no;
|
||||
maxIter 50;
|
||||
}
|
||||
|
||||
p
|
||||
{
|
||||
$pcorr;
|
||||
tolerance 1e-5;
|
||||
tolerance 1e-6;
|
||||
relTol 0.01;
|
||||
}
|
||||
|
||||
pFinal
|
||||
{
|
||||
$p;
|
||||
tolerance 1e-6;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
"(U|k|epsilon)"
|
||||
"(U|k|epsilon|omega)"
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
solver PBiCGStab;
|
||||
preconditioner DILU;
|
||||
tolerance 1e-6;
|
||||
relTol 0.1;
|
||||
}
|
||||
|
||||
"(U|k|epsilon)Final"
|
||||
"(U|k|epsilon|omega)Final"
|
||||
{
|
||||
$U;
|
||||
tolerance 1e-6;
|
||||
relTol 0;
|
||||
}
|
||||
}
|
||||
@ -58,15 +54,14 @@ solvers
|
||||
PIMPLE
|
||||
{
|
||||
correctPhi no;
|
||||
correctMeshPhi no;
|
||||
nOuterCorrectors 1;
|
||||
nCorrectors 2;
|
||||
nNonOrthogonalCorrectors 0;
|
||||
}
|
||||
|
||||
relaxationFactors
|
||||
{
|
||||
// "(U|k|epsilon).*" 1;
|
||||
}
|
||||
{}
|
||||
|
||||
cache
|
||||
{
|
||||
@ -1,69 +0,0 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
location "0";
|
||||
object p;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 2 -2 0 0 0 0];
|
||||
|
||||
internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
inlet
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
outlet
|
||||
{
|
||||
type fixedValue;
|
||||
value uniform 0;
|
||||
}
|
||||
walls
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
couple1
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
couple2
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
defaultFaces
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
ACMI1_blockage
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
ACMI1_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value uniform 0;
|
||||
}
|
||||
ACMI2_blockage
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
ACMI2_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
value uniform 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -1,14 +0,0 @@
|
||||
#!/bin/sh
|
||||
cd ${0%/*} || exit 1 # Run from this directory
|
||||
|
||||
# Source tutorial run functions
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
runApplication blockMesh
|
||||
|
||||
runApplication topoSet -constant
|
||||
|
||||
# Split the mesh to generate the ACMI coupled patches
|
||||
runApplication createBaffles -overwrite
|
||||
|
||||
#------------------------------------------------------------------------------
|
||||
@ -1,9 +0,0 @@
|
||||
#!/bin/sh
|
||||
cd ${0%/*} || exit 1 # Run from this directory
|
||||
|
||||
# Source tutorial run functions
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
./Allmesh
|
||||
|
||||
runApplication $(getApplication)
|
||||
@ -1,13 +0,0 @@
|
||||
#!/bin/sh
|
||||
cd ${0%/*} || exit 1 # Run from this directory
|
||||
|
||||
# Source tutorial run functions
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
./Allmesh
|
||||
|
||||
runApplication decomposePar
|
||||
|
||||
runParallel $(getApplication)
|
||||
|
||||
runApplication reconstructPar
|
||||
@ -1,131 +0,0 @@
|
||||
oscillatingInletACMI2D
|
||||
|
||||
This tutorial case gives an example of the Arbitrarily Coupled Mesh Interface
|
||||
(ACMI) usage. The mesh is composed of two mesh regions: an inlet channel which
|
||||
oscillates in the +/- Y-direction, and a fixed mesh region.
|
||||
|
||||
Each ACMI patch requires the specification of a 'non-overlapping' patch. In
|
||||
this example, the non-overlapping patches are described as walls, e.g. taken
|
||||
from the constant/polyMesh/boundary file:
|
||||
|
||||
1. First ACMI patch pair applied to the inlet channel outlet
|
||||
|
||||
ACMI1_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
nFaces 40;
|
||||
startFace 43720;
|
||||
matchTolerance 0.0001;
|
||||
neighbourPatch ACMI2_couple;
|
||||
nonOverlapPatch ACMI1_blockage;
|
||||
}
|
||||
ACMI1_blockage
|
||||
{
|
||||
type wall;
|
||||
nFaces 40;
|
||||
startFace 43680;
|
||||
}
|
||||
|
||||
|
||||
1. Second ACMI patch pair applied to the fixed mesh region inlet
|
||||
|
||||
ACMI2_couple
|
||||
{
|
||||
type cyclicACMI;
|
||||
nFaces 96;
|
||||
startFace 43856;
|
||||
matchTolerance 0.0001;
|
||||
neighbourPatch ACMI1_couple;
|
||||
nonOverlapPatch ACMI2_blockage;
|
||||
}
|
||||
ACMI2_blockage
|
||||
{
|
||||
type wall;
|
||||
nFaces 96;
|
||||
startFace 43760;
|
||||
}
|
||||
|
||||
|
||||
In the above, the ACMI1_blockage and ACMI1_couple patches occupy the same space,
|
||||
with duplicate points, edges and faces. The ACMI2_blockage and ACMI2_couple
|
||||
patches are created similarly.
|
||||
|
||||
The duplicate patches are initially created using the createBaffles utility.
|
||||
Firstly, the original (non-duplicated) patch faces are collected into zones
|
||||
using the topoSet utility.
|
||||
|
||||
Note: when specifying the ACMI patch-pairs, the coupled patch must be specified
|
||||
before its associated non-overlapping patch.
|
||||
|
||||
Each ACMI/non-overlapping patch pair is specified using a master-slave approach.
|
||||
However, since we are generating boundary patches (which are always master
|
||||
patches) the slave patches are simply defined using 'dummy' entries, e.g.:
|
||||
|
||||
type faceZone;
|
||||
zoneName couple1Faces;
|
||||
|
||||
patches
|
||||
{
|
||||
// create cyclic ACMI patch
|
||||
master
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI1_couple;
|
||||
type cyclicACMI;
|
||||
matchTolerance 0.0001;
|
||||
neighbourPatch ACMI2_couple;
|
||||
nonOverlapPatch ACMI1_blockage;
|
||||
}
|
||||
slave // dummy entries only
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI1_couple;
|
||||
type patch;
|
||||
}
|
||||
// create blockage patch
|
||||
master2
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI1_blockage;
|
||||
type wall;
|
||||
}
|
||||
slave12 // dummy entries only
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI1_blockage;
|
||||
type wall;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
Boundary conditions must then be applied to all geometric patches in the usual,
|
||||
manner, and the cases can be executed in parallel (as shown when running the
|
||||
Allrun-parallel script) without any special treatment, i.e. the case set-up is
|
||||
the same as when operating in serial mode.
|
||||
|
||||
|
||||
checkMesh
|
||||
---------
|
||||
checkMesh will see the 'duplicate' boundary faces but does not know about
|
||||
the area factors so will complain:
|
||||
|
||||
***Boundary openness (-0.0103092 2.3845e-17 3.80774e-17) possible hole in boundary description.
|
||||
***Open cells found, max cell openness: 0.333333, number of open cells 136
|
||||
<<Writing 136 non closed cells to set nonClosedCells
|
||||
|
||||
As long as these non-closed cells are on the ACMI they can be ignored.
|
||||
|
||||
|
||||
paraFoam
|
||||
--------
|
||||
- display: it will not display the outside of the ACMI, there will be a hole.
|
||||
- cuttingPlanes: they leave out the duplicate faces (i.e. the cells on
|
||||
the ACMI patches)
|
||||
- interpolation: the interpolation does not take into account the
|
||||
area-weights on the ACMI.
|
||||
|
||||
|
||||
pointFields
|
||||
-----------
|
||||
Same as paraFoam: the interpolation does not take into account the
|
||||
area-weights on the ACMI.
|
||||
@ -1,106 +0,0 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object createBafflesDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
// Whether to convert internal faces only (so leave boundary faces intact).
|
||||
// This is only relevant if your face selection type can pick up boundary
|
||||
// faces.
|
||||
internalFacesOnly false;
|
||||
|
||||
|
||||
// Baffles to create.
|
||||
baffles
|
||||
{
|
||||
// NOTE: cyclicAMI patches MUST BE defined PRIOR to their associted
|
||||
// blockage patches
|
||||
|
||||
ACMI1
|
||||
{
|
||||
//- Use predefined faceZone to select faces and orientation.
|
||||
type faceZone;
|
||||
zoneName couple1Faces;
|
||||
|
||||
patches
|
||||
{
|
||||
master
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI1_couple;
|
||||
type cyclicACMI;
|
||||
neighbourPatch ACMI2_couple;
|
||||
nonOverlapPatch ACMI1_blockage;
|
||||
}
|
||||
slave // not used since we're manipulating a boundary patch
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI1_couple;
|
||||
type patch;
|
||||
}
|
||||
|
||||
master2
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI1_blockage;
|
||||
type wall;
|
||||
}
|
||||
slave2 // not used since we're manipulating a boundary patch
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI1_blockage;
|
||||
type wall;
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
ACMI2
|
||||
{
|
||||
//- Use predefined faceZone to select faces and orientation.
|
||||
type faceZone;
|
||||
zoneName couple2Faces;
|
||||
|
||||
patches
|
||||
{
|
||||
master
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI2_couple;
|
||||
type cyclicACMI;
|
||||
neighbourPatch ACMI1_couple;
|
||||
nonOverlapPatch ACMI2_blockage;
|
||||
}
|
||||
slave // not used since we're manipulating a boundary patch
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI2_couple;
|
||||
type patch;
|
||||
}
|
||||
|
||||
master2
|
||||
{
|
||||
//- Master side patch
|
||||
name ACMI2_blockage;
|
||||
type wall;
|
||||
}
|
||||
slave2 // not used since we're manipulating a boundary patch
|
||||
{
|
||||
//- Slave side patch
|
||||
name ACMI2_blockage;
|
||||
type wall;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -1,70 +0,0 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object topoSetDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
actions
|
||||
(
|
||||
// Get both sides of ami
|
||||
// ~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
// Create faceZone for patch couple1
|
||||
{
|
||||
name couple1FaceSet;
|
||||
type faceSet;
|
||||
action new;
|
||||
source patchToFace;
|
||||
patch couple1;
|
||||
}
|
||||
{
|
||||
name couple1Faces;
|
||||
type faceZoneSet;
|
||||
action new;
|
||||
source setToFaceZone;
|
||||
faceSet couple1FaceSet;
|
||||
}
|
||||
|
||||
// Create faceZone for patch couple2
|
||||
{
|
||||
name couple2FaceSet;
|
||||
type faceSet;
|
||||
action new;
|
||||
source patchToFace;
|
||||
patch couple2;
|
||||
}
|
||||
{
|
||||
name couple2Faces;
|
||||
type faceZoneSet;
|
||||
action new;
|
||||
source setToFaceZone;
|
||||
faceSet couple2FaceSet;
|
||||
}
|
||||
|
||||
// Create cellZone for moving cells in inlet channel
|
||||
{
|
||||
name inletChannelCellSet;
|
||||
type cellSet;
|
||||
action new;
|
||||
source boxToCell;
|
||||
box (-100 -100 -100) (1.0001 100 100);
|
||||
}
|
||||
{
|
||||
name inletChannel;
|
||||
type cellZoneSet;
|
||||
action new;
|
||||
source setToCellZone;
|
||||
set inletChannelCellSet;
|
||||
}
|
||||
);
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -20,7 +20,6 @@ internalField uniform (0 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
//- Set patchGroups for constraint patches
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
@ -32,8 +31,8 @@ boundaryField
|
||||
outlet
|
||||
{
|
||||
type inletOutlet;
|
||||
inletValue uniform (0 0 0);
|
||||
value uniform (0 0 0);
|
||||
inletValue $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outerCylinder
|
||||
@ -44,7 +43,13 @@ boundaryField
|
||||
"propeller.*"
|
||||
{
|
||||
type movingWallVelocity;
|
||||
value uniform (0 0 0);
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type movingWallSlipVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -20,7 +20,6 @@ internalField uniform 0.0495;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
//- Set patchGroups for constraint patches
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
@ -41,6 +40,11 @@ boundaryField
|
||||
type epsilonWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -20,7 +20,6 @@ internalField uniform 0.06;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
//- Set patchGroups for constraint patches
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
@ -41,6 +40,11 @@ boundaryField
|
||||
type kqRWallFunction;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -20,25 +20,30 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
//- Set patchGroups for constraint patches
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type calculated;
|
||||
value uniform 0;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type calculated;
|
||||
value uniform 0;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
wall
|
||||
{
|
||||
type nutkWallFunction;
|
||||
value uniform 0;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type calculated;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -20,7 +20,6 @@ internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
//- Set patchGroups for constraint patches
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
@ -31,13 +30,18 @@ boundaryField
|
||||
outlet
|
||||
{
|
||||
type fixedValue;
|
||||
value uniform 0;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
wall
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type zeroGradient;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -7,6 +7,9 @@ cd ${0%/*} || exit 1 # Run from this directory
|
||||
# Remove surfaces
|
||||
rm -f constant/geometry/propeller*.obj.gz
|
||||
|
||||
# Remove post-processing fields
|
||||
rm -f 0/Q
|
||||
|
||||
cleanCase
|
||||
cleanExplicitFeatures
|
||||
|
||||
|
||||
@ -7,16 +7,20 @@ cd ${0%/*} || exit 1 # Run from this directory
|
||||
# Copy propeller surfaces from resources directory
|
||||
cp $FOAM_TUTORIALS/resources/geometry/propeller*.obj.gz constant/geometry/
|
||||
|
||||
# Meshing
|
||||
# Mesh in parallel
|
||||
runApplication blockMesh
|
||||
runApplication surfaceFeatures
|
||||
runApplication snappyHexMesh -overwrite
|
||||
runApplication decomposePar -noFields
|
||||
runParallel snappyHexMesh -overwrite
|
||||
|
||||
# Create the inlet/outlet and AMI patches
|
||||
runApplication createBaffles -overwrite
|
||||
runApplication splitBaffles -overwrite
|
||||
# Create the sliding patches
|
||||
runParallel createBaffles -overwrite
|
||||
runParallel splitBaffles -overwrite
|
||||
|
||||
# Renumbering
|
||||
runApplication renumberMesh -noFields -overwrite
|
||||
# Renumber
|
||||
runParallel renumberMesh -noFields -overwrite
|
||||
|
||||
# Create non-conformal couples
|
||||
runParallel createNonConformalCouples -overwrite nonCouple1 nonCouple2
|
||||
|
||||
#------------------------------------------------------------------------------
|
||||
|
||||
@ -8,10 +8,18 @@ cd ${0%/*} || exit 1 # Run from this directory
|
||||
if ! cloneMesh ../../../../multiphase/interFoam/RAS/propeller .
|
||||
then
|
||||
./Allmesh
|
||||
else
|
||||
runApplication decomposePar -noFields
|
||||
fi
|
||||
|
||||
runApplication decomposePar
|
||||
# Copy the fields into the processor directories
|
||||
runApplication -a decomposePar -fields -copyZero
|
||||
|
||||
# Run
|
||||
runParallel $(getApplication)
|
||||
|
||||
# Reconstruct
|
||||
runApplication reconstructParMesh -constant
|
||||
runApplication reconstructPar
|
||||
|
||||
#------------------------------------------------------------------------------
|
||||
|
||||
@ -9,7 +9,7 @@ FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object createPatchDict;
|
||||
object createBafflesDict;
|
||||
}
|
||||
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
@ -27,16 +27,16 @@ baffles
|
||||
{
|
||||
master
|
||||
{
|
||||
name AMI1;
|
||||
type cyclicAMI;
|
||||
neighbourPatch AMI2;
|
||||
name nonCouple1;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
}
|
||||
|
||||
slave
|
||||
{
|
||||
name AMI2;
|
||||
type cyclicAMI;
|
||||
neighbourPatch AMI1;
|
||||
name nonCouple2;
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -14,13 +14,13 @@ FoamFile
|
||||
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
numberOfSubdomains 4;
|
||||
numberOfSubdomains 8;
|
||||
|
||||
method hierarchical;
|
||||
|
||||
hierarchicalCoeffs
|
||||
{
|
||||
n (1 4 1);
|
||||
n (2 2 2);
|
||||
order xyz;
|
||||
}
|
||||
|
||||
|
||||
@ -22,14 +22,12 @@ ddtSchemes
|
||||
gradSchemes
|
||||
{
|
||||
default Gauss linear;
|
||||
grad(p) Gauss linear;
|
||||
grad(U) cellLimited Gauss linear 1;
|
||||
}
|
||||
|
||||
divSchemes
|
||||
{
|
||||
default none;
|
||||
// div(phi,U) Gauss upwind;
|
||||
div(phi,U) Gauss linearUpwind grad(U);
|
||||
div(phi,k) Gauss upwind;
|
||||
div(phi,epsilon) Gauss upwind;
|
||||
@ -38,7 +36,7 @@ divSchemes
|
||||
|
||||
laplacianSchemes
|
||||
{
|
||||
default Gauss linear limited corrected 0.33;
|
||||
default Gauss linear corrected;
|
||||
}
|
||||
|
||||
interpolationSchemes
|
||||
@ -48,7 +46,7 @@ interpolationSchemes
|
||||
|
||||
snGradSchemes
|
||||
{
|
||||
default limited corrected 0.33;
|
||||
default corrected;
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -19,45 +19,44 @@ solvers
|
||||
{
|
||||
solver GAMG;
|
||||
smoother DICGaussSeidel;
|
||||
tolerance 1e-6;
|
||||
relTol 0.01;
|
||||
cacheAgglomeration no;
|
||||
maxIter 50;
|
||||
|
||||
tolerance 1e-5;
|
||||
relTol 0.01;
|
||||
}
|
||||
|
||||
pFinal
|
||||
{
|
||||
$p;
|
||||
|
||||
tolerance 1e-6;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
"pcorr.*"
|
||||
{
|
||||
$p;
|
||||
|
||||
tolerance 1e-2;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
MeshPhi
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
tolerance 1e-2;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
"(U|k|epsilon)"
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
|
||||
tolerance 1e-6;
|
||||
relTol 0.1;
|
||||
}
|
||||
|
||||
"(U|k|epsilon)Final"
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
|
||||
tolerance 1e-6;
|
||||
$U;
|
||||
relTol 0;
|
||||
}
|
||||
}
|
||||
@ -65,6 +64,7 @@ solvers
|
||||
PIMPLE
|
||||
{
|
||||
correctPhi yes;
|
||||
correctMeshPhi yes;
|
||||
nOuterCorrectors 2;
|
||||
nCorrectors 1;
|
||||
nNonOrthogonalCorrectors 0;
|
||||
|
||||
@ -1,19 +0,0 @@
|
||||
#!/bin/sh
|
||||
cd ${0%/*} || exit 1 # Run from this directory
|
||||
|
||||
# Source tutorial run functions
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
application=$(getApplication)
|
||||
|
||||
runApplication blockMesh -dict $FOAM_TUTORIALS/resources/blockMesh/mixerVessel2D
|
||||
runApplication createBaffles -overwrite
|
||||
runApplication splitBaffles -overwrite
|
||||
runApplication topoSet
|
||||
|
||||
#runApplication $application
|
||||
runApplication decomposePar
|
||||
runParallel $application
|
||||
runApplication reconstructPar
|
||||
|
||||
#------------------------------------------------------------------------------
|
||||
@ -0,0 +1,47 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volVectorField;
|
||||
object U;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 1 -1 0 0 0 0];
|
||||
|
||||
internalField uniform (1 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedValue;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type pressureInletOutletVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type noSlip;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type slip;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,47 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class volScalarField;
|
||||
object p;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
dimensions [0 2 -2 0 0 0 0];
|
||||
|
||||
internalField uniform 0;
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
inlet
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
|
||||
outlet
|
||||
{
|
||||
type entrainmentPressure;
|
||||
p0 $internalField;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
walls
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
|
||||
nonCouple
|
||||
{
|
||||
type fixedFluxPressure;
|
||||
}
|
||||
}
|
||||
|
||||
// ************************************************************************* //
|
||||
7
tutorials/incompressible/pimpleFoam/laminar/nonConformalChannel/Allclean
Executable file
7
tutorials/incompressible/pimpleFoam/laminar/nonConformalChannel/Allclean
Executable file
@ -0,0 +1,7 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd "${0%/*}" || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/CleanFunctions
|
||||
|
||||
cleanCase && rm -rf constant/fvMesh && rm -f error.eps
|
||||
46
tutorials/incompressible/pimpleFoam/laminar/nonConformalChannel/Allrun
Executable file
46
tutorials/incompressible/pimpleFoam/laminar/nonConformalChannel/Allrun
Executable file
@ -0,0 +1,46 @@
|
||||
#!/bin/sh
|
||||
|
||||
cd "${0%/*}" || exit 1
|
||||
|
||||
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
||||
|
||||
mesh()
|
||||
{
|
||||
runApplication -s $1 blockMesh -dict system/blockMeshDict.$1
|
||||
}
|
||||
|
||||
run()
|
||||
{
|
||||
runApplication -s $1 $(getApplication)
|
||||
mv postProcessing/inletFlowRate postProcessing/inletFlowRate.$1
|
||||
mv postProcessing/outletFlowRate postProcessing/outletFlowRate.$1
|
||||
}
|
||||
|
||||
if isTest $@
|
||||
then
|
||||
foamDictionary -entry startFrom -set startTime system/controlDict
|
||||
fi
|
||||
|
||||
mesh AMI
|
||||
run AMI
|
||||
|
||||
mesh nonConformalCyclic
|
||||
runApplication -s nonConformalCyclic createNonConformalCouples -overwrite nonCoupleUp nonCoupleDown
|
||||
run nonConformalCyclic
|
||||
|
||||
inletFlowRateAMI=postProcessing/inletFlowRate.AMI/0/surfaceFieldValue.dat
|
||||
outletFlowRateAMI=postProcessing/outletFlowRate.AMI/0/surfaceFieldValue.dat
|
||||
inletFlowRateNonConformalCyclic=postProcessing/inletFlowRate.nonConformalCyclic/0/surfaceFieldValue.dat
|
||||
outletFlowRateNonConformalCyclic=postProcessing/outletFlowRate.nonConformalCyclic/0/surfaceFieldValue.dat
|
||||
|
||||
gnuplot << EOF
|
||||
set terminal postscript eps color enhanced
|
||||
set output "error.eps"
|
||||
set xlabel "Time (s)"
|
||||
set ylabel "Inlet-Outlet Conservation Error (%)"
|
||||
plot \
|
||||
"< paste $inletFlowRateAMI $outletFlowRateAMI" \
|
||||
us 1:(100*(\$4+\$2)/\$2) every ::1 w l t "AMI" , \
|
||||
"< paste $inletFlowRateNonConformalCyclic $outletFlowRateNonConformalCyclic" \
|
||||
us 1:(100*(\$4+\$2)/\$2) every ::1 w l t "nonConformalCyclic"
|
||||
EOF
|
||||
@ -0,0 +1,19 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "constant";
|
||||
object momentumTransport;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
simulationType laminar;
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,21 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "constant";
|
||||
object physicalProperties;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
viscosityModel constant;
|
||||
|
||||
nu [0 2 -1 0 0 0 0] 1e-4;
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,44 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object blockMeshDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
#include "blockMeshDict.internal"
|
||||
|
||||
boundary
|
||||
(
|
||||
#include "blockMeshDict.boundary"
|
||||
|
||||
coupleUp
|
||||
{
|
||||
type cyclicAMI;
|
||||
neighbourPatch coupleDown;
|
||||
faces
|
||||
(
|
||||
(7 8 24 23)
|
||||
(8 9 25 24)
|
||||
);
|
||||
}
|
||||
coupleDown
|
||||
{
|
||||
type cyclicAMI;
|
||||
neighbourPatch coupleUp;
|
||||
faces
|
||||
(
|
||||
(10 11 27 26)
|
||||
(11 12 28 27)
|
||||
);
|
||||
}
|
||||
);
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,34 @@
|
||||
inlet
|
||||
{
|
||||
type patch;
|
||||
faces
|
||||
(
|
||||
(0 1 17 16)
|
||||
(1 2 18 17)
|
||||
);
|
||||
}
|
||||
outlet
|
||||
{
|
||||
type patch;
|
||||
faces
|
||||
(
|
||||
(13 14 30 29)
|
||||
(14 15 31 30)
|
||||
);
|
||||
}
|
||||
walls
|
||||
{
|
||||
type wall;
|
||||
faces
|
||||
(
|
||||
(0 3 19 16)
|
||||
(3 5 21 19)
|
||||
(5 4 20 21)
|
||||
(4 7 23 20)
|
||||
(10 13 29 26)
|
||||
|
||||
(2 6 18 22)
|
||||
(6 9 25 22)
|
||||
(12 15 31 28)
|
||||
);
|
||||
}
|
||||
@ -0,0 +1,47 @@
|
||||
convertToMeters 0.001;
|
||||
|
||||
vertices
|
||||
(
|
||||
(-150 0 -1) (-150 25 -1) (-150 50 -1)
|
||||
( -50 0 -1) (-50 0 -1) ( -50 25 -1) ( -50 50 -1)
|
||||
( 0 0 -1) ( 0 25 -1) ( 0 50 -1)
|
||||
|
||||
( 0 0 -1) ( 0 25 -1) ( 0 50 -1)
|
||||
( 150 0 -1) ( 150 25 -1) ( 150 50 -1)
|
||||
|
||||
(-150 0 1) (-150 25 1) (-150 50 1)
|
||||
( -50 0 1) (-50 0 1) ( -50 25 1) ( -50 50 1)
|
||||
( 0 0 1) ( 0 25 1) ( 0 50 1)
|
||||
|
||||
( 0 0 1) ( 0 25 1) ( 0 50 1)
|
||||
( 150 0 1) ( 150 25 1) ( 150 50 1)
|
||||
);
|
||||
|
||||
blocks
|
||||
(
|
||||
hex (0 3 5 1 16 19 21 17) (12 5 1) simpleGrading (1 1 1)
|
||||
hex (1 5 6 2 17 21 22 18) (12 5 1) simpleGrading (1 1 1)
|
||||
hex (4 7 8 5 20 23 24 21) (6 5 1) simpleGrading (1 1 1)
|
||||
hex (5 8 9 6 21 24 25 22) (6 5 1) simpleGrading (1 1 1)
|
||||
hex (10 13 14 11 26 29 30 27) (18 6 1) simpleGrading (1 1 1)
|
||||
hex (11 14 15 12 27 30 31 28) (18 6 1) simpleGrading (1 1 1)
|
||||
);
|
||||
|
||||
edges
|
||||
(
|
||||
arc 7 8 30 (0 0 1)
|
||||
arc 23 24 30 (0 0 1)
|
||||
arc 8 9 30 (0 0 -1)
|
||||
arc 24 25 30 (0 0 -1)
|
||||
|
||||
arc 10 11 30 (0 0 1)
|
||||
arc 26 27 30 (0 0 1)
|
||||
arc 11 12 30 (0 0 -1)
|
||||
arc 27 28 30 (0 0 -1)
|
||||
);
|
||||
|
||||
defaultPatch
|
||||
{
|
||||
name frontAndBack;
|
||||
type empty;
|
||||
}
|
||||
@ -0,0 +1,44 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
object blockMeshDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
#include "blockMeshDict.internal"
|
||||
|
||||
boundary
|
||||
(
|
||||
#include "blockMeshDict.boundary"
|
||||
|
||||
nonCoupleUp
|
||||
{
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(7 8 24 23)
|
||||
(8 9 25 24)
|
||||
);
|
||||
}
|
||||
nonCoupleDown
|
||||
{
|
||||
type patch;
|
||||
inGroups (nonCouple);
|
||||
faces
|
||||
(
|
||||
(10 11 27 26)
|
||||
(11 12 28 27)
|
||||
);
|
||||
}
|
||||
);
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -0,0 +1,58 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "system";
|
||||
object controlDict;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
application pimpleFoam;
|
||||
|
||||
startFrom startTime;
|
||||
|
||||
startTime 0;
|
||||
|
||||
stopAt endTime;
|
||||
|
||||
endTime 1;
|
||||
|
||||
deltaT 0.005;
|
||||
|
||||
writeControl adjustableRunTime;
|
||||
|
||||
writeInterval 0.1;
|
||||
|
||||
purgeWrite 0;
|
||||
|
||||
writeFormat ascii;
|
||||
|
||||
writePrecision 12;
|
||||
|
||||
writeCompression off;
|
||||
|
||||
timeFormat general;
|
||||
|
||||
timePrecision 6;
|
||||
|
||||
runTimeModifiable yes;
|
||||
|
||||
adjustTimeStep no;
|
||||
|
||||
maxCo 5;
|
||||
|
||||
functions
|
||||
{
|
||||
#includeFunc patchFlowRate(patch=inlet, funcName=inletFlowRate)
|
||||
#includeFunc patchFlowRate(patch=outlet, funcName=outletFlowRate)
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -22,8 +22,6 @@ ddtSchemes
|
||||
gradSchemes
|
||||
{
|
||||
default Gauss linear;
|
||||
grad(p) Gauss linear;
|
||||
grad(U) Gauss linear;
|
||||
}
|
||||
|
||||
divSchemes
|
||||
@ -41,7 +39,6 @@ laplacianSchemes
|
||||
interpolationSchemes
|
||||
{
|
||||
default linear;
|
||||
interpolate(HbyA) linear;
|
||||
}
|
||||
|
||||
snGradSchemes
|
||||
@ -0,0 +1,56 @@
|
||||
/*--------------------------------*- C++ -*----------------------------------*\
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Version: dev
|
||||
\\/ M anipulation |
|
||||
\*---------------------------------------------------------------------------*/
|
||||
FoamFile
|
||||
{
|
||||
format ascii;
|
||||
class dictionary;
|
||||
location "system";
|
||||
object fvSolution;
|
||||
}
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
solvers
|
||||
{
|
||||
p
|
||||
{
|
||||
solver GAMG;
|
||||
smoother DICGaussSeidel;
|
||||
preconditioner DIC;
|
||||
tolerance 1e-8;
|
||||
relTol 0.01;
|
||||
}
|
||||
|
||||
pFinal
|
||||
{
|
||||
$p;
|
||||
relTol 0;
|
||||
}
|
||||
|
||||
U
|
||||
{
|
||||
solver smoothSolver;
|
||||
smoother symGaussSeidel;
|
||||
tolerance 1e-5;
|
||||
relTol 0.1;
|
||||
}
|
||||
|
||||
UFinal
|
||||
{
|
||||
$U;
|
||||
relTol 0;
|
||||
}
|
||||
}
|
||||
|
||||
PIMPLE
|
||||
{
|
||||
nNonOrthogonalCorrectors 0;
|
||||
nCorrectors 2;
|
||||
}
|
||||
|
||||
|
||||
// ************************************************************************* //
|
||||
@ -19,37 +19,23 @@ internalField uniform (0 0 0);
|
||||
|
||||
boundaryField
|
||||
{
|
||||
#includeEtc "caseDicts/setConstraintTypes"
|
||||
|
||||
rotor
|
||||
{
|
||||
type movingWallVelocity;
|
||||
value uniform (0 0 0);
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
stator
|
||||
{
|
||||
type movingWallVelocity;
|
||||
value uniform (0 0 0);
|
||||
}
|
||||
|
||||
front
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
back
|
||||
{
|
||||
type empty;
|
||||
}
|
||||
|
||||
AMI1
|
||||
{
|
||||
type cyclicAMI;
|
||||
value $internalField;
|
||||
}
|
||||
|
||||
AMI2
|
||||
nonCouple
|
||||
{
|
||||
type cyclicAMI;
|
||||
type movingWallSlipVelocity;
|
||||
value $internalField;
|
||||
}
|
||||
}
|
||||
@ -7,5 +7,10 @@ cd ${0%/*} || exit 1 # Run from this directory
|
||||
runApplication blockMesh -dict $FOAM_TUTORIALS/resources/blockMesh/mixerVessel2D
|
||||
runApplication createBaffles -overwrite
|
||||
runApplication splitBaffles -overwrite
|
||||
runApplication createNonConformalCouples -overwrite nonCouple1 nonCouple2
|
||||
|
||||
runApplication $(getApplication)
|
||||
runApplication decomposePar
|
||||
|
||||
runParallel $(getApplication)
|
||||
|
||||
runApplication reconstructPar
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user