Dictionaries: use 'e' rather than 'E' in exponential floating point numbers

tutorials/incompressible/pimpleFoam/RAS/propeller/system/snappyHexMeshDict

@@ -391,13 +391,13 @@ meshQualityControls
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
     //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
 
     //- Minimum quality of the tet formed by the face-centre
     //  and variable base point minimum decomposition triangles and
     //  the cell centre. This has to be a positive number for tracking
-    //  to work. Set to very negative number (e.g. -1E30) to
+    //  to work. Set to very negative number (e.g. -1e30) to
     //  disable.
     //     <0 = inside out tet,
     //      0 = flat tet

tutorials/incompressible/pimpleFoam/RAS/wingMotion/wingMotion_snappyHexMesh/system/snappyHexMeshDict

@@ -268,12 +268,12 @@ meshQualityControls
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
     //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
 
     //- Minimum quality of the tet formed by the face-centre
     //  and variable base point minimum decomposition triangles and
-    //  the cell centre.  Set to very negative number (e.g. -1E30) to
+    //  the cell centre.  Set to very negative number (e.g. -1e30) to
     //  disable.
     //     <0 = inside out tet,
     //      0 = flat tet

tutorials/incompressible/pisoFoam/LES/motorBike/motorBike/system/snappyHexMeshDict

@@ -280,7 +280,7 @@ meshQualityControls
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
     //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
     minTetQuality 1e-30;
 
@@ -318,7 +318,7 @@ meshQualityControls
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/incompressible/pisoFoam/LES/pitzDaily/system/controlDict

@@ -100,7 +100,7 @@ functions
             {
                 type            patchInternalField;
                 patches         ( lowerWall );
-                distance        1E-6;
+                distance        1e-6;
                 interpolate     true;
                 triangulate     false;
             }

tutorials/incompressible/pisoFoam/LES/pitzDailyMapped/system/controlDict

@@ -100,7 +100,7 @@ functions
             {
                 type            patchInternalField;
                 patches         ( lowerWall );
-                distance        1E-6;
+                distance        1e-6;
                 interpolate     true;
                 triangulate     false;
             }

tutorials/incompressible/simpleFoam/turbineSiting/system/snappyHexMeshDict

@@ -327,12 +327,12 @@ meshQualityControls
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
     //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
 
     //- Minimum quality of the tet formed by the face-centre
     //  and variable base point minimum decomposition triangles and
-    //  the cell centre.  Set to very negative number (e.g. -1E30) to
+    //  the cell centre.  Set to very negative number (e.g. -1e30) to
     //  disable.
     //     <0 = inside out tet,
     //      0 = flat tet

tutorials/mesh/foamyHexMesh/blob/system/meshQualityDict

@@ -29,7 +29,7 @@ maxConcave          80;
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
 //  the cell centre. This has to be a positive number for tracking
-//  to work. Set to very negative number (e.g. -1E30) to
+//  to work. Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet
@@ -38,7 +38,7 @@ minTetQuality       1e-30;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol              1e-20;
 
 //- Minimum face area. Set to <0 to disable.

tutorials/mesh/foamyHexMesh/flange/system/meshQualityDict

@@ -29,7 +29,7 @@ maxConcave          80;
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
 //  the cell centre. This has to be a positive number for tracking
-//  to work. Set to very negative number (e.g. -1E30) to
+//  to work. Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet
@@ -38,7 +38,7 @@ minTetQuality       1e-30;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol              0;
 
 //- Minimum face area. Set to <0 to disable.

tutorials/mesh/foamyHexMesh/flange/system/snappyHexMeshDict

@@ -304,7 +304,7 @@ meshQualityControls
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/mesh/foamyHexMesh/simpleShapes/system/meshQualityDict

@@ -29,7 +29,7 @@ maxConcave          80;
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
 //  the cell centre. This has to be a positive number for tracking
-//  to work. Set to very negative number (e.g. -1E30) to
+//  to work. Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet
@@ -38,7 +38,7 @@ minTetQuality       1e-30;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol              0;
 
 //- Minimum face area. Set to <0 to disable.

tutorials/mesh/snappyHexMesh/flange/system/snappyHexMeshDict

@@ -306,7 +306,7 @@ writeFlags
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/DTCHull/system/meshQualityDict

@@ -29,12 +29,12 @@ maxConcave 80;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol 1e-13;
 
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
-//  the cell centre.  Set to very negative number (e.g. -1E30) to
+//  the cell centre.  Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet

tutorials/multiphase/interFoam/RAS/DTCHull/system/snappyHexMeshDict

@@ -279,7 +279,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/DTCHullMoving/system/meshQualityDict

@@ -29,12 +29,12 @@ maxConcave 80;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol 1e-13;
 
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
-//  the cell centre.  Set to very negative number (e.g. -1E30) to
+//  the cell centre.  Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet

tutorials/multiphase/interFoam/RAS/DTCHullMoving/system/snappyHexMeshDict

@@ -279,7 +279,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/DTCHullWave/system/meshQualityDict

@@ -29,12 +29,12 @@ maxConcave 80;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol 1e-13;
 
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
-//  the cell centre.  Set to very negative number (e.g. -1E30) to
+//  the cell centre.  Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet

tutorials/multiphase/interFoam/RAS/DTCHullWave/system/snappyHexMeshDict

@@ -279,7 +279,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/mixerVesselAMI/system/snappyHexMeshDict

@@ -533,13 +533,13 @@ meshQualityControls
 
     // Minimum pyramid volume. Is absolute volume of cell pyramid.
     // Set to a sensible fraction of the smallest cell volume expected.
-    // Set to very negative number (e.g. -1E30) to disable.
+    // Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
 
     // Minimum quality of the tet formed by the face-centre
     // and variable base point minimum decomposition triangles and
     // the cell centre. This has to be a positive number for tracking
-    // to work. Set to very negative number (e.g. -1E30) to
+    // to work. Set to very negative number (e.g. -1e30) to
     // disable.
     //    <0 = inside out tet,
     //     0 = flat tet

tutorials/multiphase/interFoam/RAS/planingHullW3/system/meshQualityDict

@@ -29,12 +29,12 @@ maxConcave 80;
 
 //- Minimum pyramid volume. Is absolute volume of cell pyramid.
 //  Set to a sensible fraction of the smallest cell volume expected.
-//  Set to very negative number (e.g. -1E30) to disable.
+//  Set to very negative number (e.g. -1e30) to disable.
 minVol 1e-13;
 
 //- Minimum quality of the tet formed by the face-centre
 //  and variable base point minimum decomposition triangles and
-//  the cell centre.  Set to very negative number (e.g. -1E30) to
+//  the cell centre.  Set to very negative number (e.g. -1e30) to
 //  disable.
 //     <0 = inside out tet,
 //      0 = flat tet

tutorials/multiphase/interFoam/RAS/planingHullW3/system/snappyHexMeshDict.1

@@ -278,7 +278,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/planingHullW3/system/snappyHexMeshDict.2

@@ -295,7 +295,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/multiphase/interFoam/RAS/propeller/system/snappyHexMeshDict

@@ -391,13 +391,13 @@ meshQualityControls
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
     //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-13;
 
     //- Minimum quality of the tet formed by the face-centre
     //  and variable base point minimum decomposition triangles and
     //  the cell centre. This has to be a positive number for tracking
-    //  to work. Set to very negative number (e.g. -1E30) to
+    //  to work. Set to very negative number (e.g. -1e30) to
     //  disable.
     //     <0 = inside out tet,
     //      0 = flat tet

tutorials/multiphase/interFoam/laminar/cavitatingBullet/system/snappyHexMeshDict

@@ -291,12 +291,12 @@ meshQualityControls
     maxConcave 80;
 
     //- Minimum pyramid volume. Is absolute volume of cell pyramid.
-    //  Set to very negative number (e.g. -1E30) to disable.
+    //  Set to very negative number (e.g. -1e30) to disable.
     minVol 1e-20;
 
     //- Minimum quality of the tet formed by the face-centre
     //  and variable base point minimum decomposition triangles and
-    //  the cell centre.  Set to very negative number (e.g. -1E30) to
+    //  the cell centre.  Set to very negative number (e.g. -1e30) to
     //  disable.
     //     <0 = inside out tet,
     //      0 = flat tet