Rationalized Doxygen documentation of command-line options

applications/utilities/mesh/manipulation/polyDualMesh/polyDualMeshApp.C

@@ -29,31 +29,32 @@ Description
     edges.
 
 Usage
-
-    - polyDualMesh featureAngle
+    \b polyDualMesh featureAngle
 
     Detects any boundary edge > angle and creates multiple boundary faces
     for it. Normal behaviour is to have each point become a cell
     (1.5 behaviour)
 
-    \param -concaveMultiCells
-    Creates multiple cells for each point on a concave edge. Might limit
-    the amount of distortion on some meshes.
+    Options:
+      - \par -concaveMultiCells
+        Creates multiple cells for each point on a concave edge. Might limit
+        the amount of distortion on some meshes.
 
-    \param -splitAllFaces
-    Normally only constructs a single face between two cells. This single face
-    might be too distorted. splitAllFaces will create a single face for every
-    original cell the face passes through. The mesh will thus have
-    multiple faces inbetween two cells! (so is not strictly upper-triangular
-    anymore - checkMesh will complain)
+      - \par -splitAllFaces
+        Normally only constructs a single face between two cells. This single
+        face might be too distorted. splitAllFaces will create a single face for
+        every original cell the face passes through. The mesh will thus have
+        multiple faces inbetween two cells! (so is not strictly upper-triangular
+        anymore - checkMesh will complain)
 
-    \param -doNotPreserveFaceZones:
-    By default all faceZones are preserved by marking all faces, edges and
-    points on them as features. The -doNotPreserveFaceZones disables this
-    behaviour.
+      - \par -doNotPreserveFaceZones:
+        By default all faceZones are preserved by marking all faces, edges and
+        points on them as features. The -doNotPreserveFaceZones disables this
+        behaviour.
 
-    Note: is just a driver for meshDualiser. Substitute your own
-    simpleMarkFeatures to have different behaviour.
+Note
+    It is just a driver for meshDualiser. Substitute your own simpleMarkFeatures
+    to have different behaviour.
 
 \*---------------------------------------------------------------------------*/