executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces denseParticleFoam and all the corresponding
tutorials have been updated and moved to
tutorials/modules/incompressibleDenseParticleFluid.
Class
Foam::solvers::incompressibleDenseParticleFluid
Description
Solver module for transient flow of incompressible isothermal fluids coupled
with particle clouds including the effect of the volume fraction of
particles on the continuous phase, with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
This is a more intuitive keyword than "funcName" or "entryName". A
function object's name and corresponding output directory can now be
renamed as follows:
#includeFunc patchAverage
(
name=cylinderT, // <-- was funcName=... or entryName=...
region=fluid,
patch=fluid_to_solid,
field=T
)
Some packaged functions previously relied on a "name" argument that
related to an aspect of the function; e.g., the name of the faceZone
used by the faceZoneFlowRate function. These have been disambiguated.
This has also made them consistent with the preferred input syntax of
the underlying function objects.
Examples of the changed #includeFunc entries are shown below:
#includeFunc faceZoneAverage
(
faceZone=f0, // <-- was name=f0
U
)
#includeFunc faceZoneFlowRate
(
faceZone=f0 // <-- was name=f0
)
#includeFunc populationBalanceSizeDistribution
(
populationBalance=bubbles,
regionType=cellZone,
cellZone=injection, // <-- was name=injection
functionType=volumeDensity,
coordinateType=diameter,
normalise=yes
)
#includeFunc triSurfaceAverage
(
triSurface=mid.obj, // <-- was name=mid.obj
p
)
#includeFunc triSurfaceVolumetricFlowRate
(
triSurface=mid.obj // <-- was name=mid.obj
)
#includeFunc uniform
(
fieldType=volScalarField,
fieldName=alpha, // <-- was name=alpha
dimensions=[0 0 0 0 0 0 0],
value=0.2
)
particleFoam has been superseded and replaced by the more general functions
solver module executed by the foamRun application:
foamRun -solver functions
The incompressibleFluid solver specified by either the subSolver or if not
present the solver entry in the controlDict is instantiated to provide the
physical fields needed by fvModel functionObject in which the clouds fvModel is
selected to evolve the Lagrangian particles. See:
tutorials/modules/incompressibleFluid/hopperParticles
tutorials/modules/incompressibleFluid/mixerVessel2DParticles
rhoParticleFoam has been superseded and replaced by the more general functions
solver module executed by the foamRun application:
foamRun -solver functions
The isothermalFluid solver specified by either the subSolver or if not present
the solver entry in the controlDict is instantiated to provide the physical
fields needed by fvModel functionObject in which the clouds fvModel is selected
to evolve the Lagrangian particles.
Lagrangian is now compatible with the meshToMesh topology changer. If a
cloud is being simulated and this topology changer is active, then the
cloud data will be automatically mapped between the specified sequence
of meshes in the same way as the finite volume data. This works both for
serial and parallel simulations.
In addition, mapFieldsPar now also supports mapping of Lagrangian data
when run in parallel.
Description
User convenience class to handle the input of time-varying rotational speed
in rad/s if \c omega is specified or rpm if \c rpm is specified.
Usage
For specifying the rotational speed in rpm of an MRF zone:
\verbatim
MRF
{
cellZone rotor;
origin (0 0 0);
axis (0 0 1);
rpm 60;
}
\endverbatim
or the equivalent specified in rad/s:
\verbatim
MRF
{
cellZone rotor;
origin (0 0 0);
axis (0 0 1);
rpm 6.28319;
}
\endverbatim
or for a tabulated ramped rotational speed of a solid body:
\verbatim
mover
{
type motionSolver;
libs ("libfvMeshMovers.so" "libfvMotionSolvers.so");
motionSolver solidBody;
cellZone innerCylinder;
solidBodyMotionFunction rotatingMotion;
origin (0 0 0);
axis (0 1 0);
rpm table
(
(0 0)
(0.01 6000)
(0.022 6000)
(0.03 4000)
(100 4000)
);
}
\endverbatim
The following classes have been updated to use the new Function1s::omega class:
solidBodyMotionFunctions::rotatingMotion
MRFZone
rotatingPressureInletOutletVelocityFvPatchVectorField
rotatingTotalPressureFvPatchScalarField
rotatingWallVelocityFvPatchVectorField
and all tutorials using these models and BCs updated to use rpm where appropriate.
This utility now always creates two patches, and only creates duplicate
faces when they connect to different cells and point in opposite
directions. Now that ACMI has been removed, there is no need to create
duplicate faces on the same cell and with similar orientations. This is
unituitive and is now considered an invalid mesh topology.
The preferred syntax for createBaffles is now as follows:
internalFacesOnly true;
baffles
{
cyclics
{
type faceZone;
zoneName cyclicFaces;
owner
{
name cyclicLeft;
type cyclic;
neighbourPatch cyclicRight;
}
neighbour
{
name cyclicRight;
type cyclic;
neighbourPatch cyclicLeft;
}
}
}
Note that the 'patches' sub-dictionary is not needed any more; the
'owner' and 'neighbour' sub-dictionaries can be in the same dictionary
as the parameters with which faces are selected. For backwards
compatibility, however, a 'patches' sub-dictionary is still permitted,
as are keywords 'master' and 'slave' (in place of 'owner' and
'neighbour', respectively).
The 'patchPairs' syntax has been removed. Whilst consise, this syntax
made a number of assumptions and decisions regarding naming conventions
that were not sufficiently intuitive for the user to understand without
extensive reference to the code. If identical boundaries are desired on
both sides of the patch, dictionary substitution provides a more
intuitive way of minimising the amount of specifiection required. For
example, to create two back-to-back walls, the following specification
could be used:
internalFacesOnly true;
fields true;
baffles
{
walls
{
type faceZone;
zoneName wallFaces;
owner
{
name baffleWallLeft;
type wall;
patchFields
{
p
{
type zeroGradient;
}
U
{
type noSlip;
}
}
}
neighbour
{
name baffleWallRight;
$owner; // <-- Use the same settings as for the owner
}
}
}
The following examples in the tutorials ($FOAM_TUTORIALS) directory have
been converted from using AMI to the new NCC system:
+ compressible/rhoPimpleFoam/RAS/annularThermalMixer
+ incompressible/pimpleFoam/RAS/propeller
+ lagrangian/particleFoam/mixerVessel2D (formerly mixerVesselAMI2D)
+ multiphase/interFoam/RAS/mixerVessel
+ multiphase/interFoam/RAS/propeller
+ multiphase/multiphaseEulerFoam/laminar/mixerVessel2D (formerly mixerVesselAMI2D)
The following tutorial has been converted from using ACMI:
+ incompressible/pimpleFoam/RAS/oscillatingInlet
The following tutorial has been converted from using Repeat AMI:
+ incompressible/pimpleFoam/RAS/impeller
The following tutorial has been added to demonstrate NCC's ability to
create a sufficiently conservative solution in a closed domain to
maintain phase fraction boundedness:
+ multiphase/interFoam/laminar/mixerVessel2D
The following tutorials have been added to demonstrate NCC's ability to
simulate partially overlapping couples on curved surfaces:
+ incompressible/pimpleFoam/RAS/ballValve
+ multiphase/compressibleInterFoam/RAS/ballValve
The following tutorial has been added to provide a simple comparison of
the conservation behaviour of AMI and NCC:
+ incompressible/pimpleFoam/laminar/nonConformalChannel
The following tutorial has been removed, as there were sufficiently many
examples involving this geometry:
+ incompressible/pimpleFoam/laminar/mixerVesselAMI2D
The defaultPatch type currently defaults to empty which is appropriate for 1D
and 2D cases but not when creating the initial blockMesh for snappyHexMesh as
the presence of empty patches triggers the inappropriate application of 2D point
constraint corrections following snapping and morphing. To avoid this hidden
problem a warning is now generated from blockMesh when the defaultPatch is not
explicitly set for cases which generate a default patch, i.e. for which the
boundary is not entirely defined. e.g.
.
.
.
Creating block mesh topology
--> FOAM FATAL IO ERROR:
The 'defaultPatch' type must be specified for the 'defaultFaces' patch, e.g. for snappyHexMesh
defaultPatch
{
name default; // optional
type patch;
}
or for 2D meshes
defaultPatch
{
name frontAndBack; // optional
type empty;
}
.
.
.
All the tutorials have been update to include the defaultPatch specification as
appropriate.
Mesh motion and topology change are now combinable run-time selectable options
within fvMesh, replacing the restrictive dynamicFvMesh which supported only
motion OR topology change.
All solvers which instantiated a dynamicFvMesh now instantiate an fvMesh which
reads the optional constant/dynamicFvMeshDict to construct an fvMeshMover and/or
an fvMeshTopoChanger. These two are specified within the optional mover and
topoChanger sub-dictionaries of dynamicFvMeshDict.
When the fvMesh is updated the fvMeshTopoChanger is first executed which can
change the mesh topology in anyway, adding or removing points as required, for
example for automatic mesh refinement/unrefinement, and all registered fields
are mapped onto the updated mesh. The fvMeshMover is then executed which moved
the points only and calculates the cell volume change and corresponding
mesh-fluxes for conservative moving mesh transport. If multiple topological
changes or movements are required these would be combined into special
fvMeshMovers and fvMeshTopoChangers which handle the processing of a list of
changes, e.g. solidBodyMotionFunctions:multiMotion.
The tutorials/multiphase/interFoam/laminar/sloshingTank3D3DoF case has been
updated to demonstrate this new functionality by combining solid-body motion
with mesh refinement/unrefinement:
/*--------------------------------*- C++ -*----------------------------------*\
========= |
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
\\ / O peration | Website: https://openfoam.org
\\ / A nd | Version: dev
\\/ M anipulation |
\*---------------------------------------------------------------------------*/
FoamFile
{
format ascii;
class dictionary;
location "constant";
object dynamicMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
mover
{
type motionSolver;
libs ("libfvMeshMovers.so" "libfvMotionSolvers.so");
motionSolver solidBody;
solidBodyMotionFunction SDA;
CofG (0 0 0);
lamda 50;
rollAmax 0.2;
rollAmin 0.1;
heaveA 4;
swayA 2.4;
Q 2;
Tp 14;
Tpn 12;
dTi 0.06;
dTp -0.001;
}
topoChanger
{
type refiner;
libs ("libfvMeshTopoChangers.so");
// How often to refine
refineInterval 1;
// Field to be refinement on
field alpha.water;
// Refine field in between lower..upper
lowerRefineLevel 0.001;
upperRefineLevel 0.999;
// Have slower than 2:1 refinement
nBufferLayers 1;
// Refine cells only up to maxRefinement levels
maxRefinement 1;
// Stop refinement if maxCells reached
maxCells 200000;
// Flux field and corresponding velocity field. Fluxes on changed
// faces get recalculated by interpolating the velocity. Use 'none'
// on surfaceScalarFields that do not need to be reinterpolated.
correctFluxes
(
(phi none)
(nHatf none)
(rhoPhi none)
(alphaPhi.water none)
(meshPhi none)
(meshPhi_0 none)
(ghf none)
);
// Write the refinement level as a volScalarField
dumpLevel true;
}
// ************************************************************************* //
Note that currently this is the only working combination of mesh-motion with
topology change within the new framework and further development is required to
update the set of topology changers so that topology changes with mapping are
separated from the mesh-motion so that they can be combined with any of the
other movements or topology changes in any manner.
All of the solvers and tutorials have been updated to use the new form of
dynamicMeshDict but backward-compatibility was not practical due to the complete
reorganisation of the mesh change structure.
for consistency with the regionToCell topo set source and splitMeshRegions and
provides more logical extension to the multiple and outside point variants insidePoints,
outsidePoint and outsidePoints.
to provide a single consistent code and user interface to the specification of
physical properties in both single-phase and multi-phase solvers. This redesign
simplifies usage and reduces code duplication in run-time selectable solver
options such as 'functionObjects' and 'fvModels'.
* physicalProperties
Single abstract base-class for all fluid and solid physical property classes.
Physical properties for a single fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties' dictionary.
Physical properties for a phase fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties.<phase>' dictionary.
This replaces the previous inconsistent naming convention of
'transportProperties' for incompressible solvers and
'thermophysicalProperties' for compressible solvers.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the
'physicalProperties' dictionary does not exist.
* phaseProperties
All multi-phase solvers (VoF and Euler-Euler) now read the list of phases and
interfacial models and coefficients from the
'constant/<region>/phaseProperties' dictionary.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the 'phaseProperties'
dictionary does not exist. For incompressible VoF solvers the
'transportProperties' is automatically upgraded to 'phaseProperties' and the
two 'physicalProperties.<phase>' dictionary for the phase properties.
* viscosity
Abstract base-class (interface) for all fluids.
Having a single interface for the viscosity of all types of fluids facilitated
a substantial simplification of the 'momentumTransport' library, avoiding the
need for a layer of templating and providing total consistency between
incompressible/compressible and single-phase/multi-phase laminar, RAS and LES
momentum transport models. This allows the generalised Newtonian viscosity
models to be used in the same form within laminar as well as RAS and LES
momentum transport closures in any solver. Strain-rate dependent viscosity
modelling is particularly useful with low-Reynolds number turbulence closures
for non-Newtonian fluids where the effect of bulk shear near the walls on the
viscosity is a dominant effect. Within this framework it would also be
possible to implement generalised Newtonian models dependent on turbulent as
well as mean strain-rate if suitable model formulations are available.
* visosityModel
Run-time selectable Newtonian viscosity model for incompressible fluids
providing the 'viscosity' interface for 'momentumTransport' models.
Currently a 'constant' Newtonian viscosity model is provided but the structure
supports more complex functions of time, space and fields registered to the
region database.
Strain-rate dependent non-Newtonian viscosity models have been removed from
this level and handled in a more general way within the 'momentumTransport'
library, see section 'viscosity' above.
The 'constant' viscosity model is selected in the 'physicalProperties'
dictionary by
viscosityModel constant;
which is equivalent to the previous entry in the 'transportProperties'
dictionary
transportModel Newtonian;
but backward-compatibility is provided for both the keyword and model
type.
* thermophysicalModels
To avoid propagating the unnecessary constructors from 'dictionary' into the
new 'physicalProperties' abstract base-class this entire structure has been
removed from the 'thermophysicalModels' library. The only use for this
constructor was in 'thermalBaffle' which now reads the 'physicalProperties'
dictionary from the baffle region directory which is far simpler and more
consistent and significantly reduces the amount of constructor code in the
'thermophysicalModels' library.
* compressibleInterFoam
The creation of the 'viscosity' interface for the 'momentumTransport' models
allows the complex 'twoPhaseMixtureThermo' derived from 'rhoThermo' to be
replaced with the much simpler 'compressibleTwoPhaseMixture' derived from the
'viscosity' interface, avoiding the myriad of unused thermodynamic functions
required by 'rhoThermo' to be defined for the mixture.
Same for 'compressibleMultiphaseMixture' in 'compressibleMultiphaseInterFoam'.
This is a significant improvement in code and input consistency, simplifying
maintenance and further development as well as enhancing usability.
Henry G. Weller
CFD Direct Ltd.
splitBaffles identifies baffle faces; i.e., faces on the mesh boundary
which share the exact same set of points as another boundary face. It
then splits the points to convert these faces into completely separate
boundary patches. This functionality was previously provided by calling
mergeOrSplitBaffles with the "-split" option.
mergeBaffles also identifes the duplicate baffle faces, but then merges
them, converting them into a single set of internal faces. This
functionality was previously provided by calling mergeOrSplitBaffles
without the "-split" option.
When using 'simple' or 'hierarchical' decomposition it is useful to slightly rotate a
coordinate-aligned block-mesh to improve the processor boundaries by avoiding
irregular cell distribution at those boundaries. The degree of slight rotation
is controlled by the 'delta' coefficient and a value of 0.001 is generally
suitable so to avoid unnecessary clutter in 'decomposeParDict' 'delta' now
defaults to this value.
The FOAM file format has not changed from version 2.0 in many years and so there
is no longer a need for the 'version' entry in the FoamFile header to be
required and to reduce unnecessary clutter it is now optional, defaulting to the
current file format 2.0.
With the new fvModels framework it is now possible to implement complex models
and wrappers around existing complex models which can then be optionally
selected in any general solver which provides compatible fields and
thermophysical properties. This simplifies code development and maintenance by
significantly reducing complex code duplication and also provide the opportunity
of running these models in other solvers without the need for code duplication
and alteration.
The immediate advantage of this development is the replacement of the
specialised Lagrangian solvers with their general counterparts:
reactingParticleFoam -> reactingFoam
reactingParcelFoam -> reactingFoam
sprayFoam -> reactingFoam
simpleReactingParticleFoam -> reactingFoam
buoyantReactingParticleFoam -> buoyantReactingFoam
For example to run a reactingParticleFoam case in reactingFoam add the following
entries in constant/fvModels:
buoyancyForce
{
type buoyancyForce;
}
clouds
{
type clouds;
libs ("liblagrangianParcel.so");
}
which add the acceleration due to gravity needed by Lagrangian clouds and the
clouds themselves.
See the following cases for examples converted from reactingParticleFoam:
$FOAM_TUTORIALS/combustion/reactingFoam/Lagrangian
and to run a buoyantReactingParticleFoam case in buoyantReactingFoam add the
following entry constant/fvModels:
clouds
{
type clouds;
libs ("liblagrangianParcel.so");
}
to add support for Lagrangian clouds and/or
surfaceFilm
{
type surfaceFilm;
libs ("libsurfaceFilmModels.so");
}
to add support for surface film. The buoyancyForce fvModel is not required in
this case as the buoyantReactingFoam solver has built-in support for buoyancy
utilising the p_rgh formulation to provide better numerical handling for this
force for strongly buoyancy-driven flows.
See the following cases for examples converted from buoyantReactingParticleFoam:
$FOAM_TUTORIALS/combustion/buoyantReactingFoam/Lagrangian
All the tutorial cases for the redundant solvers have been updated and converted
into their new equivalents and redirection scripts replace these solvers to
provide users with prompts on which solvers have been replaced by which and
information on how to upgrade their cases.
To support this change and allow all previous Lagrangian tutorials to run as
before the special Lagrangian solver fvSolution/PIMPLE control
solvePrimaryRegion has been replaced by the more general and useful controls:
models : Enable the fvModels
thermophysics : Enable thermophysics (energy and optional composition)
flow : Enable flow (pressure/velocity system)
which also replace the fvSolution/PIMPLE control frozenFlow present in some
solvers. These three controls can be used in various combinations to allow for
example only the fvModels to be evaluated, e.g. in
$FOAM_TUTORIALS/combustion/buoyantReactingFoam/Lagrangian/rivuletPanel
PIMPLE
{
models yes;
thermophysics no;
flow no;
.
.
.
so that only the film is solved. Or during the start-up of a case it might be
beneficial to run the pressure-velocity system for a while without updating
temperature which can be achieved by switching-off thermophysics. Also the
behaviour of the previous frozenFlow switch can be reproduced by switching flow
off with the other two switches on, allowing for example reactions, temperature
and composition update without flow.
The thermo parcel now supports thermophysical property modelling. This
particle does not store phase or specie fractions so it only provides a
single phase with a uniform composition. Additional specification is
required in the cloud subModel configuration in order to select the
specie. For example:
compositionModel singlePhaseMixture;
singlePhaseMixtureCoeffs
{
phases
(
solid
{
CaCO3 1;
}
);
}
To provide more flexibility, extensibility, run-time modifiability and
consistency the handling of optional pressure limits has been moved from
pressureControl (settings in system/fvSolution) to the new limitPressure
fvConstraint (settings in system/fvConstraints).
All tutorials have been updated which provides guidance when upgrading cases but
also helpful error messages are generated for cases using the old settings
providing specific details as to how the case should be updated, e.g. for the
tutorials/compressible/rhoSimpleFoam/squareBend case which has the pressure
limit specification:
SIMPLE
{
...
pMinFactor 0.1;
pMaxFactor 2;
...
generates the error message
--> FOAM FATAL IO ERROR:
Pressure limits should now be specified in fvConstraints:
limitp
{
type limitPressure;
minFactor 0.1;
maxFactor 2;
}
file: /home/dm2/henry/OpenFOAM/OpenFOAM-dev/tutorials/compressible/rhoSimpleFoam/squareBend/system/fvSolution/SIMPLE from line 41 to line 54.
Assuming the heat required to cause the phase change is provided by the film the
energy transferred with the mass to the primary region corresponds to vapour
at the film surface temperature.
The constant heat capacity hacked thermo in surfaceFilmModels and the
corresponding transfer terms in Lagrangian have been replaced by the standard
OpenFOAM rhoThermo which provides a general handling of thermo-physical
properties, in particular non-constant heat capacity. Further rationalisation
of liquid and solid properties has also been undertaken in support of this work
to provide a completely consistent interface to sensible and absolute enthalpy.
Now for surfaceFilmModels the thermo-physical model and properties are specified
in a constant/<region>/thermophysicalProperties dictionary consistent with all
other types of continuum simulation.
This significantly rationalises, simplifies and generalises the handling of
thermo-physical properties for film simulations and is a start at doing the same
for Lagrangian.
The new fvModels is a general interface to optional physical models in the
finite volume framework, providing sources to the governing conservation
equations, thus ensuring consistency and conservation. This structure is used
not only for simple sources and forces but also provides a general run-time
selection interface for more complex models such as radiation and film, in the
future this will be extended to Lagrangian, reaction, combustion etc. For such
complex models the 'correct()' function is provided to update the state of these
models at the beginning of the PIMPLE loop.
fvModels are specified in the optional constant/fvModels dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The new fvConstraints is a general interface to optional numerical constraints
applied to the matrices of the governing equations after construction and/or to
the resulting field after solution. This system allows arbitrary changes to
either the matrix or solution to ensure numerical or other constraints and hence
violates consistency with the governing equations and conservation but it often
useful to ensure numerical stability, particularly during the initial start-up
period of a run. Complex manipulations can be achieved with fvConstraints, for
example 'meanVelocityForce' used to maintain a specified mean velocity in a
cyclic channel by manipulating the momentum matrix and the velocity solution.
fvConstraints are specified in the optional system/fvConstraints dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The separation of fvOptions into fvModels and fvConstraints provides a rational
and consistent separation between physical and numerical models which is easier
to understand and reason about, avoids the confusing issue of location of the
controlling dictionary file, improves maintainability and easier to extend to
handle current and future requirements for optional complex physical models and
numerical constraints.
This function gives a value of one during a user-specified duration, and
zero at all other times. It is useful for defining the time range in
which an injection or ignition heat source or similar operates.
Example usage, scaling a value:
<name>
{
type scale;
scale squarePulse;
start 0;
duration 1;
value 100;
}
This function has been utilised in a number of tutorial fvOption
configurations to provide a specific window in which the fvOption is
applied. This was previously achieved by "timeStart" and "duration"
controls hard coded into the fvOptions themselves.
The injection models do not inject parcels into the film they specifically eject
parcels from the film and the name "injection" is very confusing and misleading
hence the logical rename injection -> ejection.
Originally the only supported geometry specification were triangulated surfaces,
hence the name of the directory: constant/triSurface, however now that other
surface specifications are supported and provided it is much more logical that
the directory is named accordingly: constant/geometry. All tutorial and
template cases have been updated.
Note that backward compatibility is provided such that if the constant/geometry
directory does not exist but constant/triSurface does then the geometry files
are read from there.
A dynamicMotionSolverFvMesh must now use a "motionSolver" or
"motionSolvers" entry to select the underlying motion solver. For
example, in constant/dynamicMeshDict:
dynamicFvMesh dynamicMotionSolverFvMesh;
motionSolverLibs ("librigidBodyMeshMotion.so");
motionSolver rigidBodyMotion;
...
Previously the motion solver could also be specified with the keyword
"solver", but this resulted in a name clash with rigid body solvers
which are frequently specified in the same scope. For this reason, the
"solver" and "solvers" entries have been removed.
This simplifies and standardises the handling of radiation in all solvers which
include an energy equation, all of which now support radiation via the
'radiation' fvOption which is selected in the constant/fvOption or
constant/<region>/fvOption file:
radiation
{
type radiation;
libs ("libradiationModels.so");
}
The radiation model, parameters, settings and sub-models are specified in the
'radiationProperties' file as before.
It is better to not select and instantiate a model, fvOption etc. than to create
it and set it inactive as the creation process requires reading of settings,
parameters, fields etc. with all the associated specification and storage
without being used. Also the incomplete implementation added a lot of
complexity in the low-level operation of models introducing a significant
maintenance overhead and development overhead for new models.
The convoluted separate ".*Coeffs" dictionary form of model coefficient
specification is now deprecated and replaced with the simpler sub-dictionary
form but support is provided for the deprecated form for backward comparability.
e.g.
thermophysicalProperties
{
type liquid;
useReferenceValues no;
liquid H2O;
}
rather than
filmThermoModel liquid;
liquidCoeffs
{
useReferenceValues no;
liquid H2O;
}
and
forces
{
thermocapillary;
distributionContactAngle
{
Ccf 0.085;
distribution
{
type normal;
normalDistribution
{
minValue 50;
maxValue 100;
expectation 75;
variance 100;
}
}
zeroForcePatches ();
}
}
rather than
forces
(
thermocapillary
distributionContactAngle
);
distributionContactAngleCoeffs
{
Ccf 0.085;
distribution
{
type normal;
normalDistribution
{
minValue 50;
maxValue 100;
expectation 75;
variance 100;
}
}
zeroForcePatches ();
}
All the tutorial cases containing a surface film have been updated for guidance,
e.g. tutorials/lagrangian/buoyantReactingParticleFoam/hotBoxes/constant/surfaceFilmProperties
surfaceFilmModel thermoSingleLayer;
regionName wallFilmRegion;
active true;
thermophysicalProperties
{
type liquid;
useReferenceValues no;
liquid H2O;
}
viscosity
{
model liquid;
}
deltaWet 1e-4;
hydrophilic no;
momentumTransport
{
model laminar;
Cf 0.005;
}
forces
{
thermocapillary;
distributionContactAngle
{
Ccf 0.085;
distribution
{
type normal;
normalDistribution
{
minValue 50;
maxValue 100;
expectation 75;
variance 100;
}
}
zeroForcePatches ();
}
}
injection
{
curvatureSeparation
{
definedPatchRadii
(
("(cube[0-9][0-9]_side[0-9]_to_cube[0-9][0-9]_side[0-9])" 0)
);
}
drippingInjection
{
cloudName reactingCloud1;
deltaStable 0;
particlesPerParcel 100.0;
parcelDistribution
{
type RosinRammler;
RosinRammlerDistribution
{
minValue 5e-04;
maxValue 0.0012;
d 7.5e-05;
n 0.5;
}
}
}
}
phaseChange
{
model standardPhaseChange;
Tb 373;
deltaMin 1e-8;
L 1.0;
}
upperSurfaceModels
{
heatTransfer
{
model mappedConvectiveHeatTransfer;
}
}
lowerSurfaceModels
{
heatTransfer
{
model constant;
c0 50;
}
}
and renamed defaultSpecie as its mass fraction is derived from the sum of the
mass fractions of all other species and it need not be inert but must be present
everywhere, e.g. N2 in air/fuel combustion which can be involved in the
production of NOx.
The previous name inertSpecie in thermophysicalProperties is supported for
backward compatibility.
The standard set of Lagrangian clouds are now selectable at run-time.
This means that a solver that supports Lagrangian modelling can now use
any type of cloud (with some restrictions). Previously, solvers were
hard-coded to use specific cloud modelling. In addition, a cloud-list
structure has been added so that solvers may select multiple clouds,
rather than just one.
The new system is controlled as follows:
- If only a single cloud is required, then the settings for the
Lagrangian modelling should be placed in a constant/cloudProperties
file.
- If multiple clouds are required, then a constant/clouds file should be
created containing a list of cloud names defined by the user. Each
named cloud then reads settings from a corresponding
constant/<cloudName>Properties file. Clouds are evolved sequentially
in the order in which they are listed in the constant/clouds file.
- If no clouds are required, then the constant/cloudProperties file and
constant/clouds file should be omitted.
The constant/cloudProperties or constant/<cloudName>Properties files are
the same as previous cloud properties files; e.g.,
constant/kinematicCloudProperties or constant/reactingCloud1Properties,
except that they now also require an additional top-level "type" entry
to select which type of cloud is to be used. The available options for
this entry are:
type cloud; // A basic cloud of solid
// particles. Includes forces,
// patch interaction, injection,
// dispersion and stochastic
// collisions. Same as the cloud
// previously used by
// rhoParticleFoam
// (uncoupledKinematicParticleFoam)
type collidingCloud; // As "cloud" but with resolved
// collision modelling. Same as the
// cloud previously used by DPMFoam
// and particleFoam
// (icoUncoupledKinematicParticleFoam)
type MPPICCloud; // As "cloud" but with MPPIC
// collision modelling. Same as the
// cloud previously used by
// MPPICFoam.
type thermoCloud; // As "cloud" but with
// thermodynamic modelling and heat
// transfer with the carrier phase.
// Same as the limestone cloud
// previously used by
// coalChemistryFoam.
type reactingCloud; // As "thermoCloud" but with phase
// change and mass transfer
// coupling with the carrier
// phase. Same as the cloud
// previously used in fireFoam.
type reactingMultiphaseCloud; // As "reactingCloud" but with
// particles that contain multiple
// phases. Same as the clouds
// previously used in
// reactingParcelFoam and
// simpleReactingParcelFoam and the
// coal cloud used in
// coalChemistryFoam.
type sprayCloud; // As "reactingCloud" but with
// additional spray-specific
// collision and breakup modelling.
// Same as the cloud previously
// used in sprayFoam and
// engineFoam.
The first three clouds are not thermally coupled, so are available in
all Lagrangian solvers. The last four are thermally coupled and require
access to the carrier thermodynamic model, so are only available in
compressible Lagrangian solvers.
This change has reduced the number of solvers necessary to provide the
same functionality; solvers that previously differed only in their
Lagrangian modelling can now be combined. The Lagrangian solvers have
therefore been consolidated with consistent naming as follows.
denseParticleFoam: Replaces DPMFoam and MPPICFoam
reactingParticleFoam: Replaces sprayFoam and coalChemistryFoam
simpleReactingParticleFoam: Replaces simpleReactingParcelFoam
buoyantReactingParticleFoam: Replaces reactingParcelFoam
fireFoam and engineFoam remain, although fireFoam is likely to be merged
into buoyantReactingParticleFoam in the future once the additional
functionality it provides is generalised.
Some additional minor functionality has also been added to certain
solvers:
- denseParticleFoam has a "cloudForceSplit" control which can be set in
system/fvOptions.PIMPLE. This provides three methods for handling the
cloud momentum coupling, each of which have different trade-off-s
regarding numerical artefacts in the velocity field. See
denseParticleFoam.C for more information, and also bug report #3385.
- reactingParticleFoam and buoyantReactingParticleFoam now support
moving mesh in order to permit sharing parts of their implementation
with engineFoam.
Following the generalisation of the TurbulenceModels library to support
non-Newtonian laminar flow including visco-elasticity and extensible to other
form of non-Newtonian behaviour the name TurbulenceModels is misleading and does
not properly represent how general the OpenFOAM solvers now are. The
TurbulenceModels now provides an interface to momentum transport modelling in
general and the plan is to rename it MomentumTransportModels and in preparation
for this the turbulenceProperties dictionary has been renamed momentumTransport
to properly reflect its new more general purpose.
The old turbulenceProperties name is supported for backward-compatibility.
