This allows much greater flexibility in the instantiation of reaction system
which may in general depend on fields other than the thermodynamic state. This
also simplifies mixture thermodynamics removing the need for the reactingMixture
and the instantiation of all the thermodynamic package combinations depending on
it.
which are now read directly from the thermophysicalProperties dictionary for
consistency with non-reacting mixture thermodynamics. The species thermo and
reactions lists can still be in separate files if convenient and included into
the thermophysicalProperties file using the standard dictionary #include.
This formalises the flexible and extensible OpenFOAM thermodynamics and reaction
format as the direct input to OpenFOAM solvers. The CHEMKIN format is still
supported by first converting to the OpenFOAM format using the chemkinToFoam
utility.
Now for transient simulations "Final" solver settings are required for ALL
equations providing consistency between the solution of velocity, energy,
composition and radiation properties.
However "Final" relaxation factors are no longer required for fields or
equations and if not present the standard value for the variable will be
applied. Given that relaxation factors other than 1 are rarely required for
transient runs and hence the same for all iterations including the final one
this approach provide simpler input while still providing the flexibility to
specify a different value for the final iteration if required. For steady cases
it is usual to execute just 1 outer iteration per time-step for which the
standard relaxation factors are appropriate, and if more than one iteration is
executed it is common to use the same factors for both. In the unlikely event
of requiring different relaxation factors for the final iteration this is still
possible to specify via the now optional "Final" specification.
to simplify reacting case setup.
Tutorials
tutorials/combustion/chemFoam/ic8h18_TDAC
tutorials/combustion/reactingFoam/RAS/SandiaD_LTS
tutorials/combustion/reactingFoam/laminar/counterFlowFlame2DLTS_GRI_TDAC
tutorials/combustion/reactingFoam/laminar/counterFlowFlame2D_GRI_TDAC
updated to benefit from the new configuration files.
Patch contributed by Francesco Contino
including third-body and pressure dependent derivatives, and derivative of the
temperature term. The complete Jacobian is more robust than the incomplete and
partially approximate form used previously and improves the efficiency of the
stiff ODE solvers which rely on the Jacobian.
Reaction rate evaluation moved from the chemistryModel to specie library to
simplfy support for alternative reaction rate expressions and associated
Jacobian terms.
Temperature clipping included in the Reaction class. This is inactive by default
but for most cases it is advised to provide temperature limits (high and
low). These are provided in the foamChemistryFile with the keywords Thigh and
Tlow. When using chemkinToFoam these values are set to the limits of the Janaf
thermodynamic data. With the new Jacobian this temperature clipping has proved
very beneficial for stability and for some cases essential.
Improvement of the TDAC MRU list better integrated in add and grow functions.
To get the most out of this significant development it is important to re-tune
the ODE integration tolerances, in particular the absTol in the odeCoeffs
sub-dictionary of the chemistryProperties dictionary:
odeCoeffs
{
solver seulex;
absTol 1e-12;
relTol 0.01;
}
Typically absTol can now be set to 1e-8 and relTol to 0.1 except for ignition
time problems, and with theses settings the integration is still robust but for
many cases a lot faster than previously.
Code development and integration undertaken by
Francesco Contino
Henry G. Weller, CFD Direct
using a run-time selectable preconditioner
References:
Van der Vorst, H. A. (1992).
Bi-CGSTAB: A fast and smoothly converging variant of Bi-CG
for the solution of nonsymmetric linear systems.
SIAM Journal on scientific and Statistical Computing, 13(2), 631-644.
Barrett, R., Berry, M. W., Chan, T. F., Demmel, J., Donato, J.,
Dongarra, J., Eijkhout, V., Pozo, R., Romine, C. & Van der Vorst, H.
(1994).
Templates for the solution of linear systems:
building blocks for iterative methods
(Vol. 43). Siam.
See also: https://en.wikipedia.org/wiki/Biconjugate_gradient_stabilized_method
Tests have shown that PBiCGStab with the DILU preconditioner is more
robust, reliable and shows faster convergence (~2x) than PBiCG with
DILU, in particular in parallel where PBiCG occasionally diverges.
This remarkable improvement over PBiCG prompted the update of all
tutorial cases currently using PBiCG to use PBiCGStab instead. If any
issues arise with this update please report on Mantis: http://bugs.openfoam.org
Provides efficient integration of complex laminar reaction chemistry,
combining the advantages of automatic dynamic specie and reaction
reduction with ISAT (in situ adaptive tabulation). The advantages grow
as the complexity of the chemistry increases.
References:
Contino, F., Jeanmart, H., Lucchini, T., & D’Errico, G. (2011).
Coupling of in situ adaptive tabulation and dynamic adaptive chemistry:
An effective method for solving combustion in engine simulations.
Proceedings of the Combustion Institute, 33(2), 3057-3064.
Contino, F., Lucchini, T., D'Errico, G., Duynslaegher, C.,
Dias, V., & Jeanmart, H. (2012).
Simulations of advanced combustion modes using detailed chemistry
combined with tabulation and mechanism reduction techniques.
SAE International Journal of Engines,
5(2012-01-0145), 185-196.
Contino, F., Foucher, F., Dagaut, P., Lucchini, T., D’Errico, G., &
Mounaïm-Rousselle, C. (2013).
Experimental and numerical analysis of nitric oxide effect on the
ignition of iso-octane in a single cylinder HCCI engine.
Combustion and Flame, 160(8), 1476-1483.
Contino, F., Masurier, J. B., Foucher, F., Lucchini, T., D’Errico, G., &
Dagaut, P. (2014).
CFD simulations using the TDAC method to model iso-octane combustion
for a large range of ozone seeding and temperature conditions
in a single cylinder HCCI engine.
Fuel, 137, 179-184.
Two tutorial cases are currently provided:
+ tutorials/combustion/chemFoam/ic8h18_TDAC
+ tutorials/combustion/reactingFoam/laminar/counterFlowFlame2D_GRI_TDAC
the first of which clearly demonstrates the advantage of dynamic
adaptive chemistry providing ~10x speedup,
the second demonstrates ISAT on the modest complex GRI mechanisms for
methane combustion, providing a speedup of ~4x.
More tutorials demonstrating TDAC on more complex mechanisms and cases
will be provided soon in addition to documentation for the operation and
settings of TDAC. Also further updates to the TDAC code to improve
consistency and integration with the rest of OpenFOAM and further
optimize operation can be expected.
Original code providing all algorithms for chemistry reduction and
tabulation contributed by Francesco Contino, Tommaso Lucchini, Gianluca
D’Errico, Hervé Jeanmart, Nicolas Bourgeois and Stéphane Backaert.
Implementation updated, optimized and integrated into OpenFOAM-dev by
Henry G. Weller, CFD Direct Ltd with the help of Francesco Contino.
RunFunctions: Added "isTest()" argument parsing function
tutorials: Updated Allrun scripts to propagate the "-test" option
tutorials: Removed the lower Alltest scripts and updated the Allrun to
use the "isTest()" function to handle test-specific operation
