The keyword 'select' is now used to specify the cell, face or point set
selection method consistently across all classes requiring this functionality.
'select' replaces the inconsistently named 'regionType' and 'selectionMode'
keywords used previously but backwards-compatibility is provided for user
convenience. All configuration files and tutorials have been updated.
Examples of 'select' from the tutorial cases:
functionObjects:
cellZoneAverage
{
type volFieldValue;
libs ("libfieldFunctionObjects.so");
writeControl writeTime;
writeInterval 1;
fields (p);
select cellZone;
cellZone injection;
operation volAverage;
writeFields false;
}
#includeFunc populationBalanceSizeDistribution
(
name=numberDensity,
populationBalance=aggregates,
select=cellZone,
cellZone=outlet,
functionType=numberDensity,
coordinateType=projectedAreaDiameter,
allCoordinates=yes,
normalise=yes,
logTransform=yes
)
fvModel:
cylinderHeat
{
type heatSource;
select all;
q 5e7;
}
fvConstraint:
momentumForce
{
type meanVelocityForce;
select all;
Ubar (0.1335 0 0);
}
In order to ensure temperature consistency between the phases it is necessary to
solve for the mixture temperature rather than the mixture energy or phase
energies which makes it very difficult to conserve energy. The new temperature
equation is a temperature correction on the combined phase energy equations
which will conserve the phase and mixture energies at convergence. The
heat-flux (Laplacian) term is maintained in mixture temperature form so
heat-transfer boundary conditions, in particular for CHT, remain in terms of the
mixture kappaEff. The fvModels are applied to the phase energy equations and
the implicit part converted into an implicit term in the temperature correction
part of the equation to improve convergence and stability.
This development has required some change to the alphaEqn.H and interFoam has
been updated for consistency in preparation for conversion into the
solvers::incompressibleVoF modular module.
All compressibleVoF fvModels and tutorial cases have been updated for the above
change. Note that two entries are now required for the convection terms in the
temperature equation, one for explicit phase energy terms and another for the
implicit phase temperature correction terms, e.g.
tutorials/modules/compressibleVoF/ballValve
div(alphaRhoPhi,e) Gauss limitedLinear 1;
div(alphaRhoPhi,T) Gauss upwind;
In the above the upwind scheme is selected for the phase temperature correction
terms as they are corrections and will converge to a zero contribution. However
there may be cases which converge better if the same scheme is used for both the
energy and temperature terms, more testing is required.
The cavitation models used by the interFoam solver and the
compressibleVoF solver module can now be applied regardless of the
ordering of the liquid and vapour phases. A "liquid" keyword is now
required in the model specification in order to control which phase is
considered to be the condensed liquid state. Previously the liquid phase
was assumed to be the first of the two phases.
The thermodynamic density field is now named "rho" by default and only renamed
"thermo:rho" by solvers that create and maintain a separate continuity density
field which is named "rho". This change significantly simplifies and
standardises the specification of schemes and boundary conditions requiring
density as it is now always named "rho" or "rho.<phase>" unless under some very
unusual circumstances the thermodynamic rather than continuity density is
required for a solver maintaining both.
The advantage of this change is particularly noticeable for multiphase
simulations in which each phase has its own density now named "rho.<phase>"
rather than "thermo:rho.<phase>" as separate phase continuity density fields are
not required so for multiphaseEulerFoam the scheme specification:
"div\(alphaRhoPhi.*,\(p\|thermo:rho.*\)\)" Gauss limitedLinear 1;
is now written:
"div\(alphaRhoPhi.*,\(p\|rho.*\)\)" Gauss limitedLinear 1;
The basic thermophysical properties are now considered fundamental and complex
models like kineticTheoryModel using these names for some other purpose must
disambiguate using typedName to prepend the model name to the field name.
This change standardises, rationalises and simplifies the specification of
fvSchemes and boundary conditions.
thermo:rho will also be renamed rho in a subsequent commit to complete this
rationalisation.
Replacing the specific twoPhaseChangeModel with a consistent and general fvModel
interface will support not just cavitation using the new compressible
VoFCavitation fvModel but also other phase-change and interface manipulation
models in the future and is easier to use for case-specific and other user
customisation.
Class
Foam::fv::compressible::VoFCavitation
Description
Cavitation fvModel
Usage
Example usage:
\verbatim
VoFCavitation
{
type VoFCavitation;
libs ("libcompressibleVoFCavitation.so");
model SchnerrSauer;
KunzCoeffs
{
pSat 2300; // Saturation pressure
UInf 20.0;
tInf 0.005; // L = 0.1 m
Cc 1000;
Cv 1000;
}
MerkleCoeffs
{
pSat 2300; // Saturation pressure
UInf 20.0;
tInf 0.005; // L = 0.1 m
Cc 80;
Cv 1e-03;
}
SchnerrSauerCoeffs
{
pSat 2300; // Saturation pressure
n 1.6e+13;
dNuc 2.0e-06;
Cc 1;
Cv 1;
}
}
\endverbatim
The cavitating ballValve tutorial has been updated to use the new VoFCavitation
fvModel.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleVoF.
Class
Foam::solvers::compressibleVoF
Description
Solver module for for 2 compressible, non-isothermal immiscible fluids
using a VOF (volume of fluid) phase-fraction based interface capturing
approach, with optional mesh motion and mesh topology changes including
adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
compressibleVoF.C
See also
Foam::solvers::fluidSolver
