The timeName() function simply returns the dimensionedScalar::name() which holds
the user-time name of the current time and now that timeName() is no longer
virtual the dimensionedScalar::name() can be called directly. The timeName()
function implementation is maintained for backward-compatibility.
A set of routines for cutting polyhedra have been added. These can cut
polyhedral cells based on the adjacent point values and an iso-value
which defines the surface. The method operates directly on the
polyhedral cells; it does not decompose them into tetrahedra at any
point. The routines can compute the cut topology as well as integrals of
properties above and below the cut surface.
An iso-surface algorithm has been added based on these polyhedral
cutting routines. It is significantly more robust than the previous
algorithm, and produces compact surfaces equivalent to the previous
algorithm's maximum filtering level. It is also approximately 3 times
faster than the previous algorithm, and 10 times faster when run
repeatedly on the same set of cells (this is because some addressing is
cached and reused).
This algorithm is used by the 'isoSurface', 'distanceSurface' and
'cutPlane' sampled surfaces.
The 'cutPlane' sampled surface is a renaming of 'cuttingPlane' to make
it consistent with the corresponding packaged function. The name
'cuttingPlane' has been retained for backwards compatibility and can
still be used to select a 'cutPlane' surface. The legacy 'plane' surface
has been removed.
The 'average' keyword has been removed from specification of these
sampled surfaces as cell-centred values are no longer used in the
generation of or interpolation to an iso-surface. The 'filtering'
keyword has also been removed as it relates to options within the
previous algorithm. Zone support has been reinstated into the
'isoSurface' sampled surface. Interpolation to all these sampled
surfaces has been corrected to exactly match the user-selected
interpolation scheme, and the interpolation procedure no longer
unnecessarily re-generates data that is already available.
so that it can now be used with either the isothermalFluid or fluid solver
modules, thus supporting non-uniform fluid properties, compressibility and
thermal effect. This development makes the special potentialFreeSurfaceFoam
solver redundant as both the isothermalFluid and fluid solver modules are more
general and has been removed and replaced with a user redirection script.
The tutorials/multiphase/potentialFreeSurfaceFoam cases have been updated to run
with the isothermalFluid solver module:
tutorials/multiphase/potentialFreeSurfaceFoam/oscillatingBox
tutorials/multiphase/potentialFreeSurfaceFoam/movingOscillatingBox
which demonstrate how to upgrade potentialFreeSurfaceFoam cases to
isothermalFluid.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleVoF.
Class
Foam::solvers::compressibleVoF
Description
Solver module for for 2 compressible, non-isothermal immiscible fluids
using a VOF (volume of fluid) phase-fraction based interface capturing
approach, with optional mesh motion and mesh topology changes including
adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
compressibleVoF.C
See also
Foam::solvers::fluidSolver
An extruded region is now contiguous even when specified with multiple
face zones. Edges that border faces in different zones now extrude into
internal faces, rather than a pair of boundary faces. Different zones
now result only in different mapped patches in the extruded and primary
meshes. This means a mesh can be created for a single contiguous
extruded region spanning multiple patches. This might be necessary if,
for example, a film region is needed across multiple walls with
differing thermal boundary conditions.
Disconnected extruded regions can still be constructed by running the
extrudeToRegionMesh utility muiliple times.
The mapped patches created to couple the extruded regions now have
symmetric names similar to those created by splitMeshRegions. For
example, if the mapped patch in the primary region is called
"region0_to_extrudedRegion_f0", then the corresponding patch in the
extruded region is called "extrudedRegion_to_region0_f0" (f0, in this
example is the face zone from which the region was extruded).
Offsetting of the top patch is now handled automatically by a new
mappedExtrudedWallPolyPatch. This refers to the bottom patch and
automatically calculates the sampling offsets by doing a wave across the
extruded mesh layers. This prevents the need to store the offsets in the
patch itself, and makes it possible for the patch to undergo mesh
changes without adding additional functions to the polyPatch (mapping
constructors, autoMap and rmap methods, etc ...).
This is a packaged function object that conveniently computes averages
of fields on tri-surfaces. It can be executed on the command line as
follows:
foamPostProcess -func "triSurfaceAverage(name=mid.obj, p)"
This will compute the average of the field "p" on a surface file in
"constant/geometry/mid.obj".
The calculation could also be done at run-time by adding the following
entry to the functions section of the system/controlDict
#includeFunc triSurfaceAverage(name=mid.obj, p)
MRF (multiple reference frames) can now be used to simulate SRF (single
reference frame) cases by defining the MRF zone to include all the cells is the
mesh and applying appropriate boundary conditions. The huge advantage of this
is that MRF can easily be added to any solver by the addition of forcing terms
in the momentum equation and absolute velocity to relative flux conversions in
the formulation of the pressure equation rather than having to reformulate the
momentum and pressure system based on the relative velocity as in traditional
SRF. Also most of the OpenFOAM solver applications and all the solver modules
already support MRF.
To enable this generalisation of MRF the transformations necessary on the
velocity boundary conditions in the MRF zone can no longer be handled by the
MRFZone class itself but special adapted fvPatchFields are required. Although
this adds to the case setup it provides much greater flexibility and now complex
inlet/outlet conditions can be applied within the MRF zone, necessary for some
SRF case and which was not possible in the original MRF implementation. Now for
walls rotating within the MRF zone the new 'MRFnoSlip' velocity boundary
conditions must be applied, e.g. in the
tutorials/modules/incompressibleFluid/mixerVessel2DMRF/constant/MRFProperties
case:
boundaryField
{
rotor
{
type MRFnoSlip;
}
stator
{
type noSlip;
}
front
{
type empty;
}
back
{
type empty;
}
}
similarly for SRF cases, e.g. in the
tutorials/modules/incompressibleFluid/mixerSRF case:
boundaryField
{
inlet
{
type fixedValue;
value uniform (0 0 -10);
}
outlet
{
type pressureInletOutletVelocity;
value $internalField;
}
rotor
{
type MRFnoSlip;
}
outerWall
{
type noSlip;
}
cyclic_half0
{
type cyclic;
}
cyclic_half1
{
type cyclic;
}
}
For SRF case all the cells should be selected in the MRFproperties dictionary
which is achieved by simply setting the optional 'selectionMode' entry to all,
e.g.:
SRF
{
selectionMode all;
origin (0 0 0);
axis (0 0 1);
rpm 1000;
}
In the above the rotational speed is set in RPM rather than rad/s simply by
setting the 'rpm' entry rather than 'omega'.
The tutorials/modules/incompressibleFluid/rotor2DSRF case is more complex and
demonstrates a transient SRF simulation of a rotor requiring the free-stream
velocity to rotate around the apparently stationary rotor which is achieved
using the new 'MRFFreestreamVelocity' velocity boundary condition. The
equivalent simulation can be achieved by simply rotating the entire mesh and
keeping the free-stream flow stationary and this is demonstrated in the
tutorials/modules/incompressibleFluid/rotor2DRotating case for comparison.
The special SRFSimpleFoam and SRFPimpleFoam solvers are now redundant and have
been replaced by redirection scripts providing details of the case migration
process.
Settings for the individual non-conformal couples can now be put in a
"nonConformalCouples" sub-dictionary of the
system/createNonConformalCouplesDict. For example:
fields no;
nonConformalCouples // <-- new sub-dictionary
{
nonConformalCouple_none
{
patches (nonCouple1 nonCouple2);
transform none;
}
nonConformalCouple_30deg
{
patches (nonCoupleBehind nonCoupleAhead);
transform rotational;
rotationAxis (-1 0 0);
rotationCentre (0 0 0);
rotationAngle 30;
}
}
This permits settings to be #include-d from files that themselves
contain sub-dictionaries without the utility treating those
sub-dictionaries as if they specify a non-conformal coupling. It also
makes the syntax more comparable to that of createBafflesDict.
The new "nonConformalCouples" sub-dictionary is optional, so this change
is backwards compatible. The new syntax is recommended, however, and all
examples have been changed accordingly.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces pimpleFoam, pisoFoam and simpleFoam and all
the corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleFluid.
Class
Foam::solvers::incompressibleFluid
Description
Solver module for steady or transient turbulent flow of incompressible
isothermal fluids with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
incompressibleFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
Full backward-compatibility is provided which support for both multiComponentMixture and
multiComponentPhaseModel provided but all tutorials have been updated.
Now that the reaction system, chemistry and combustion models are completely
separate from the multicomponent mixture thermophysical properties package that
supports them it is inconsistent that thermo is named reactionThermo and the
name multicomponentThermo better describes the purpose and functionality.
The cellProc field is the field of cell-processor labels.
The names "distribution" and "dist" have been removed as these are
ambiguous in relation to other forms of distribution and to distance.
The reconstructPar utility now reconstructs the mesh if and when it is
necessary to do so. The reconstructParMesh utility is therefore no
longer necessary and has been removed.
It was necessary/advantagous to consolidate these utilities into one
because in the case of mesh changes it becomes increasingly less clear
which of the separate utilities is responsible for reconstructing data
that is neither clearly physical field nor mesh topology; e.g., moving
points, sets, refinement data, and so on.
This is so that when an executable is removed and replaced by a
placeholder script, a pull, re-build and run now launches the script
rather than an out-of-date executable.
If the sequence of meshes are decomposed independently the number, order and
potentially type of processor patches is likely to change. Thus the processor
patches and patch fields must be replaced with those of the new mesh.
and moveDynamicMesh renamed to moveMesh
Description
Mesh motion and topological mesh change utility.
Executes the mover, topoChanger and distributor specified in the
dynamicMeshDict in a time-loop.
This utility now always creates two patches, and only creates duplicate
faces when they connect to different cells and point in opposite
directions. Now that ACMI has been removed, there is no need to create
duplicate faces on the same cell and with similar orientations. This is
unituitive and is now considered an invalid mesh topology.
The preferred syntax for createBaffles is now as follows:
internalFacesOnly true;
baffles
{
cyclics
{
type faceZone;
zoneName cyclicFaces;
owner
{
name cyclicLeft;
type cyclic;
neighbourPatch cyclicRight;
}
neighbour
{
name cyclicRight;
type cyclic;
neighbourPatch cyclicLeft;
}
}
}
Note that the 'patches' sub-dictionary is not needed any more; the
'owner' and 'neighbour' sub-dictionaries can be in the same dictionary
as the parameters with which faces are selected. For backwards
compatibility, however, a 'patches' sub-dictionary is still permitted,
as are keywords 'master' and 'slave' (in place of 'owner' and
'neighbour', respectively).
The 'patchPairs' syntax has been removed. Whilst consise, this syntax
made a number of assumptions and decisions regarding naming conventions
that were not sufficiently intuitive for the user to understand without
extensive reference to the code. If identical boundaries are desired on
both sides of the patch, dictionary substitution provides a more
intuitive way of minimising the amount of specifiection required. For
example, to create two back-to-back walls, the following specification
could be used:
internalFacesOnly true;
fields true;
baffles
{
walls
{
type faceZone;
zoneName wallFaces;
owner
{
name baffleWallLeft;
type wall;
patchFields
{
p
{
type zeroGradient;
}
U
{
type noSlip;
}
}
}
neighbour
{
name baffleWallRight;
$owner; // <-- Use the same settings as for the owner
}
}
}
The 'pointSync' setting in createPatchDict is now optional and defaults
to false. This setting is very rarely used. A number of unused
'createPatchDict' files have also been removed and obsolete information
has been removed from the annotated example dictionaries.
When cloning a case, users can copy the field data from the
from the latest time directory in the source case, using
the -latestTime option.
The -startFrom option enables the copied time directory to be
renamed, often as the '0' (zero) directory in the new case, e.g.
foamCloneCase -latestTime -startFrom 0 sourceCase newCase
When the time directories in the source and new cases are
different, the uniform directory and flux field "phi" are
deleted from the copied time directory to avoid incorrect
initial state.
The functionality provided by 'cyclicACMI' and 'cyclicRepeatAMI' has
been entirely superseded by non-conformal coupled (NCC). All references
to 'cyclicACMI' and 'cyclicRepeatAMI' have therefore been removed.
See previous commits 569fa31d and 420866cf for more explanation,
instructions on updating, and relevant tutorial cases.
This major development provides coupling of patches which are
non-conformal, i.e. where the faces of one patch do not match the faces
of the other. The coupling is fully conservative and second order
accurate in space, unlike the Arbitrary Mesh Interface (AMI) and
associated ACMI and Repeat AMI methods which NCC replaces.
Description:
A non-conformal couple is a connection between a pair of boundary
patches formed by projecting one patch onto the other in a way that
fills the space between them. The intersection between the projected
surface and patch forms new faces that are incorporated into the finite
volume mesh. These new faces are created identically on both sides of
the couple, and therefore become equivalent to internal faces within the
mesh. The affected cells remain closed, meaning that the area vectors
sum to zero for all the faces of each cell. Consequently, the main
benefits of the finite volume method, i.e. conservation and accuracy,
are not undermined by the coupling.
A couple connects parts of mesh that are otherwise disconnected and can
be used in the following ways:
+ to simulate rotating geometries, e.g. a propeller or stirrer, in which
a part of the mesh rotates with the geometry and connects to a
surrounding mesh which is not moving;
+ to connect meshes that are generated separately, which do not conform
at their boundaries;
+ to connect patches which only partially overlap, in which the
non-overlapped section forms another boundary, e.g. a wall;
+ to simulate a case with a geometry which is periodically repeating by
creating multiple couples with different transformations between
patches.
The capability for simulating partial overlaps replaces the ACMI
functionality, currently provided by the 'cyclicACMI' patch type, and
which is unreliable unless the couple is perfectly flat. The capability
for simulating periodically repeating geometry replaces the Repeat AMI
functionality currently provided by the 'cyclicRepeatAMI' patch type.
Usage:
The process of meshing for NCC is very similar to existing processes for
meshing for AMI. Typically, a mesh is generated with an identifiable set
of internal faces which coincide with the surface through which the mesh
will be coupled. These faces are then duplicated by running the
'createBaffles' utility to create two boundary patches. The points are
then split using 'splitBaffles' in order to permit independent motion of
the patches.
In AMI, these patches are assigned the 'cyclicAMI' patch type, which
couples them using AMI interpolation methods.
With NCC, the patches remain non-coupled, e.g. a 'wall' type. Coupling
is instead achieved by running the new 'createNonConformalCouples'
utility, which creates additional coupled patches of type
'nonConformalCyclic'. These appear in the 'constant/polyMesh/boundary'
file with zero faces; they are populated with faces in the finite volume
mesh during the connection process in NCC.
For a single couple, such as that which separates the rotating and
stationary sections of a mesh, the utility can be called using the
non-coupled patch names as arguments, e.g.
createNonConformalCouples -overwrite rotatingZoneInner rotatingZoneOuter
where 'rotatingZoneInner' and 'rotatingZoneOuter' are the names of the
patches.
For multiple couples, and/or couples with transformations,
'createNonConformalCouples' should be run without arguments. Settings
will then be read from a configuration file named
'system/createNonConformalCouplesDict'. See
'$FOAM_ETC/caseDicts/annotated/createNonConformalCouplesDict' for
examples.
Boundary conditions must be specified for the non-coupled patches. For a
couple where the patches fully overlap, boundary conditions
corresponding to a slip wall are typically applied to fields, i.e
'movingWallSlipVelocity' (or 'slip' if the mesh is stationary) for
velocity U, 'zeroGradient' or 'fixedFluxPressure' for pressure p, and
'zeroGradient' for other fields. For a couple with
partially-overlapping patches, boundary conditions are applied which
physically represent the non-overlapped region, e.g. a no-slip wall.
Boundary conditions also need to be specified for the
'nonConformalCyclic' patches created by 'createNonConformalCouples'. It
is generally recommended that this is done by including the
'$FOAM_ETC/caseDicts/setConstraintTypes' file in the 'boundaryField'
section of each of the field files, e.g.
boundaryField
{
#includeEtc "caseDicts/setConstraintTypes"
inlet
{
...
}
...
}
For moving mesh cases, it may be necessary to correct the mesh fluxes
that are changed as a result of the connection procedure. If the
connected patches do not conform perfectly to the mesh motion, then
failure to correct the fluxes can result in noise in the pressure
solution.
Correction for the mesh fluxes is enabled by the 'correctMeshPhi' switch
in the 'PIMPLE' (or equivalent) section of 'system/fvSolution'. When it
is enabled, solver settings are required for 'MeshPhi'. The solution
just needs to distribute the error enough to dissipate the noise. A
smooth solver with a loose tolerance is typically sufficient, e.g. the
settings in 'system/fvSolution' shown below:
solvers
{
MeshPhi
{
solver smoothSolver;
smoother symGaussSeidel;
tolerance 1e-2;
relTol 0;
}
...
}
PIMPLE
{
correctMeshPhi yes;
...
}
The solution of 'MeshPhi' is an inexpensive computation since it is
applied only to a small subset of the mesh adjacent to the
couple. Conservation is maintained whether or not the mesh flux
correction is enabled, and regardless of the solution tolerance for
'MeshPhi'.
Advantages of NCC:
+ NCC maintains conservation which is required for many numerical
schemes and algorithms to operate effectively, in particular those
designed to maintain boundedness of a solution.
+ Closed-volume systems no longer suffer from accumulation or loss of
mass, poor convergence of the pressure equation, and/or concentration
of error in the reference cell.
+ Partially overlapped simulations are now possible on surfaces that are
not perfectly flat. The projection fills space so no overlaps or
spaces are generated inside contiguously overlapping sections, even if
those sections have sharp angles.
+ The finite volume faces created by NCC have geometrically accurate
centres. This makes the method second order accurate in space.
+ The polyhedral mesh no longer requires duplicate boundary faces to be
generated in order to run a partially overlapped simulation.
+ Lagrangian elements can now transfer across non-conformal couplings in
parallel.
+ Once the intersection has been computed and applied to the finite
volume mesh, it can use standard cyclic or processor cyclic finite
volume boundary conditions, with no need for additional patch types or
matrix interfaces.
+ Parallel communication is done using the standard
processor-patch-field system. This is more efficient than alternative
systems since it has been carefully optimised for use within the
linear solvers.
+ Coupled patches are disconnected prior to mesh motion and topology
change and reconnected afterwards. This simplifies the boundary
condition specification for mesh motion fields.
Resolved Bug Reports:
+ https://bugs.openfoam.org/view.php?id=663
+ https://bugs.openfoam.org/view.php?id=883
+ https://bugs.openfoam.org/view.php?id=887
+ https://bugs.openfoam.org/view.php?id=1337
+ https://bugs.openfoam.org/view.php?id=1388
+ https://bugs.openfoam.org/view.php?id=1422
+ https://bugs.openfoam.org/view.php?id=1829
+ https://bugs.openfoam.org/view.php?id=1841
+ https://bugs.openfoam.org/view.php?id=2274
+ https://bugs.openfoam.org/view.php?id=2561
+ https://bugs.openfoam.org/view.php?id=3817
Deprecation:
NCC replaces the functionality provided by AMI, ACMI and Repeat AMI.
ACMI and Repeat AMI are insufficiently reliable to warrant further
maintenance so are removed in an accompanying commit to OpenFOAM-dev.
AMI is more widely used so will be retained alongside NCC for the next
version release of OpenFOAM and then subsequently removed from
OpenFOAM-dev.
This change means this function is determining the sequence in which
points are plotted topologically. This makes it possible to plot a layer
average along a pipe that goes through many changes of direction.
Previously, the function determined the order by means of a geometric
sort in the plot direction. This only worked when the layers were
perpendicular to one of the coordinate axes.
This is a simple function that provides a convenient way for a user to
call fvc::reconstruct for the purposes of post-processing flux fields;
e.g., to construct a cell velocity from a face flux.
It can be used to generate output during a run by adding the following
settings to a case's controlDict:
functions
{
#includeFunc reconstruct(phi)
}
Or it can be executed as a postProcessing step by calling:
postProcess -func "reconstruct(phi)"
This new mapping structure is designed to support run-time mesh-to-mesh mapping
to allow arbitrary changes to the mesh structure, for example during extreme
motion requiring significant topology change including region disconnection etc.
