Originally the only supported geometry specification were triangulated surfaces,
hence the name of the directory: constant/triSurface, however now that other
surface specifications are supported and provided it is much more logical that
the directory is named accordingly: constant/geometry. All tutorial and
template cases have been updated.
Note that backward compatibility is provided such that if the constant/geometry
directory does not exist but constant/triSurface does then the geometry files
are read from there.
The phase-change functionality in interPhaseChangeFoam has been generalised and
moved into the run-time selectable twoPhaseChange library included into
interFoam providing optional phase-change. The three cavitation models provided
in interPhaseChangeFoam are now included in the twoPhaseChange library and the
two interPhaseChangeFoam cavitation tutorials updated for interFoam.
interPhaseChangeFoam has been replaced by a user redirection script which prints
the following message:
The interPhaseChangeFoam solver has solver has been replaced by the more general
interFoam solver, which now supports phase-change using the new twoPhaseChange
models library.
To run with with phase-change create a constant/phaseChangeProperties dictionary
containing the phase-change model specification, e.g.
phaseChangeModel SchnerrSauer;
pSat 2300; // Saturation pressure
See the following cases for an example converted from interPhaseChangeFoam:
$FOAM_TUTORIALS/multiphase/interFoam/laminar/cavitatingBullet
$FOAM_TUTORIALS/multiphase/interFoam/RAS/propeller
A volumetric flow rate through a tri-surface can now be obtained using
the volumetricFlowRateTriSurface preconfigured function object, using
the following entry in system/controlDict:
fuctions
{
#includeFunc "volumetricFlowRateTriSurface(name=surface.stl)"
}
Where "surface.stl" is a tri-surface file in the constant/triSurface
directory. An example of this has been added to the
incompressible/pimpleFoam/RAS/impeller tutorial case.
Note that when possible, it is preferable to use the flowRatePatch or
flowRateFaceZone functions, as these make direct use of the flux and
therefore report a value that is exactly that computed by the solver.
volumetricFlowRateTriSurface, by contrast, does interpolation of the
velocity field which introduces error.
In addition, a minor fix has been made to the underlying
surfaceFieldValue function object so that it does not need a zone/set
name when values on a searchable surface are requested.
Description
Transforms the specified velocity field into a
cylindrical polar coordinate system or back to Cartesian.
Example of function object specification to convert the velocity field U
into cylindrical polar coordinates before averaging and returning the
average to Cartesian coordinates:
\verbatim
cartesianToCylindrical
{
type cylindrical;
libs ("libfieldFunctionObjects.so");
origin (0 0 0);
axis (0 0 1);
field U;
writeControl outputTime;
writeInterval 1;
}
#includeFunc fieldAverage(cylindrical(U))
cylindricalToCartesian
{
type cylindrical;
libs ("libfieldFunctionObjects.so");
origin (0 0 0);
axis (0 0 1);
field cylindrical(U)Mean;
toCartesian true;
result UMean;
writeControl outputTime;
writeInterval 1;
}
\endverbatim
This is particularly useful for cases with rotating regions, e.g. mixer
vessels with AMI.
See tutorials/incompressible/pimpleFoam/laminar/mixerVesselAMI2D
It is better to not select and instantiate a model, fvOption etc. than to create
it and set it inactive as the creation process requires reading of settings,
parameters, fields etc. with all the associated specification and storage
without being used. Also the incomplete implementation added a lot of
complexity in the low-level operation of models introducing a significant
maintenance overhead and development overhead for new models.
This tutorial now serves as an example of how to compute flow-rates
through zones defined by triangulated surfaces.
A small fix has also been added to searchableSurfaceToFaceZone to
improve robustness on ambiguous cases.
It is now possible to define coordinate systems in a central location and
selected them by name for any model requiring one, e.g. the
explicitPorositySource.
Description
Provides a centralized coordinateSystem collection.
For example with the porous region specified in \c constant/fvOptions as
\verbatim
porosity
{
type explicitPorositySource;
explicitPorositySourceCoeffs
{
selectionMode cellZone;
cellZone porousBlockage;
type DarcyForchheimer;
// D 100; // Very little blockage
// D 200; // Some blockage but steady flow
// D 500; // Slight waviness in the far wake
D 1000; // Fully shedding behavior
d ($D $D $D);
f (0 0 0);
coordinateSystem porousBlockage;
}
}
\endverbatim
the corresponding coordinate system \c porousBlockage is looked-up
automatically from the \c constant/coordinateSystems dictionary:
\verbatim
porousBlockage
{
type cartesian;
origin (0 0 0);
coordinateRotation
{
type axesRotation;
e1 (1 0 0);
e2 (0 1 0);
}
}
\endverbatim
See \c tutorials/incompressible/pisoFoam/laminar/porousBlockage
Most fvOptions change the state of the fields and equations they are applied to
but do not change internal state so it makes more sense that the interface is
const, consistent with MeshObjects. For the few fvOptions which do maintain a
changing state the member data is now mutable.
foamDictionary executions are now wrapped by runApplication like any
other execution so that they do not print during a test loop.
foamDictionary does not produce a conforming log, however, so
log.foamDictionary has been filtered out of the formation of the test
loop report so that false failures are not reported.
The new optional 'slash' scoping syntax is now the default and provides a more
intuitive and flexible syntax than the previous 'dot' syntax, corresponding to
the common directory/file access syntax used in UNIX, providing support for
reading entries from other dictionary files.
In the 'slash' syntax
'/' is the scope operator
'../' is the parent dictionary scope operator
'!' is the top-level dictionary scope operator
Examples:
internalField 3.4;
active
{
type fixedValue;
value.air $internalField;
}
inactive
{
type anotherFixedValue;
value $../active/value.air;
anotherValue $!active/value.air;
sub
{
value $../../active/value.air;
anotherValue $!active/value.air;
}
}
"U.*"
{
solver GAMG;
}
e.air
{
$U.air;
}
external
{
value $testSlashDict2!active/value.air;
}
active2
{
$testSlashDict2!active;
}
If there is a part of the keyword before the '!' then this is taken to be the
file name of the dictionary from which the entry will be looked-up using the
part of the keyword after the '!'. For example given a file testSlashDict containing
internalField 5.6;
active
{
type fixedValue;
value.air $internalField;
}
entries from it can be read directly from another file, e.g.
external
{
value $testSlashDict2!active/value.air;
}
active2
{
$testSlashDict2!active;
}
which expands to
external
{
value 5.6;
}
active2
{
type fixedValue;
value.air 5.6;
}
These examples are provided in applications/test/dictionary.
The the default syntax can be changed from 'slash' to 'dot' in etc/controlDict
to revert to the previous behaviour:
OptimisationSwitches
{
.
.
.
// Default dictionary scoping syntax
inputSyntax slash; // Change to dot for previous behaviour
}
or within a specific dictionary by adding the entry
See applications/test/dictionary/testDotDict.
Added a local copy of the $FOAM_TUTORIALS/resources/blockMesh/pitzDaily
corresponding to the OpenFOAM test instructions.
Resolves bug-report https://bugs.openfoam.org/view.php?id=3497
providing the shear-stress term in the momentum equation for incompressible and
compressible Newtonian, non-Newtonian and visco-elastic laminar flow as well as
Reynolds averaged and large-eddy simulation of turbulent flow.
The general deviatoric shear-stress term provided by the MomentumTransportModels
library is named divDevTau for compressible flow and divDevSigma (sigma =
tau/rho) for incompressible flow, the spherical part of the shear-stress is
assumed to be either included in the pressure or handled separately. The
corresponding stress function sigma is also provided which in the case of
Reynolds stress closure returns the effective Reynolds stress (including the
laminar contribution) or for other Reynolds averaged or large-eddy turbulence
closures returns the modelled Reynolds stress or sub-grid stress respectively.
For visco-elastic flow the sigma function returns the effective total stress
including the visco-elastic and Newtonian contributions.
For thermal flow the heat-flux generated by thermal diffusion is now handled by
the separate ThermophysicalTransportModels library allowing independent run-time
selection of the heat-flux model.
During the development of the MomentumTransportModels library significant effort
has been put into rationalising the components and supporting libraries,
removing redundant code, updating names to provide a more logical, consistent
and extensible interface and aid further development and maintenance. All
solvers and tutorials have been updated correspondingly and backward
compatibility of the input dictionaries provided.
Henry G. Weller
CFD Direct Ltd.
Following the generalisation of the TurbulenceModels library to support
non-Newtonian laminar flow including visco-elasticity and extensible to other
form of non-Newtonian behaviour the name TurbulenceModels is misleading and does
not properly represent how general the OpenFOAM solvers now are. The
TurbulenceModels now provides an interface to momentum transport modelling in
general and the plan is to rename it MomentumTransportModels and in preparation
for this the turbulenceProperties dictionary has been renamed momentumTransport
to properly reflect its new more general purpose.
The old turbulenceProperties name is supported for backward-compatibility.
renaming the legacy keywords
RASModel -> model
LESModel -> model
laminarModel -> model
which is simpler and clear within the context in which they are specified, e.g.
RAS
{
model kOmegaSST;
turbulence on;
printCoeffs on;
}
rather than
RAS
{
RASModel kOmegaSST;
turbulence on;
printCoeffs on;
}
The old keywords are supported for backward compatibility.
This significant improvement is flexibility of SemiImplicitSource required a
generalisation of the source specification syntax and all tutorials have been
updated accordingly.
Description
Semi-implicit source, described using an input dictionary. The injection
rate coefficients are specified as pairs of Su-Sp coefficients, i.e.
\f[
S(x) = S_u + S_p x
\f]
where
\vartable
S(x) | net source for field 'x'
S_u | explicit source contribution
S_p | linearised implicit contribution
\endvartable
Example tabulated heat source specification for internal energy:
\verbatim
volumeMode absolute; // specific
sources
{
e
{
explicit table ((0 0) (1.5 $power));
implicit 0;
}
}
\endverbatim
Example coded heat source specification for enthalpy:
\verbatim
volumeMode absolute; // specific
sources
{
h
{
explicit
{
type coded;
name heatInjection;
code
#{
// Power amplitude
const scalar powerAmplitude = 1000;
// x is the current time
return mag(powerAmplitude*sin(x));
#};
}
implicit 0;
}
}
\endverbatim
Rather than specifying the controls per field it is simpler to use a single set
of controls for all the fields in the list and use separate instances of the
fieldAverage functionObject for different control sets:
Example of function object specification setting all the optional parameters:
fieldAverage1
{
type fieldAverage;
libs ("libfieldFunctionObjects.so");
writeControl writeTime;
restartOnRestart false;
restartOnOutput false;
periodicRestart false;
restartPeriod 0.002;
base time;
window 10.0;
windowName w1;
mean yes;
prime2Mean yes;
fields (U p);
}
This allows for a simple specification with the optional prime2Mean entry using
#includeFunc fieldAverage(U, p, prime2Mean = yes)
or if the prime2Mean is not needed just
#includeFunc fieldAverage(U, p)
Description
PTT model for viscoelasticity using the upper-convected time
derivative of the stress tensor with support for multiple modes.
Reference:
\verbatim
Thien, N. P., & Tanner, R. I. (1977).
A new constitutive equation derived from network theory.
Journal of Non-Newtonian Fluid Mechanics, 2(4), 353-365.
\endverbatim
Currently the common exponential form of the PTT model is provided but it could
easily be extended to also support the linear and quadratic forms if the need
arises.
By specifying a list of coefficients in turbulenceProperties, e.g. for the
generalised Maxwell model:
modes
(
{
lambda 0.01;
}
{
lambda 0.04;
}
);
of for the generalised Giesekus model:
modes
(
{
lambda 0.01;
alphaG 0.05;
}
{
lambda 0.04;
alphaG 0.2;
}
);
Visco-elasticity stress tensors (sigma0, sigma1...) are solved for each mode and
summed to create the effective stress of the complex fluid:
Any number of modes can be specified and if only one mode is required the
'modes' entry is not read and the coefficients are obtained as before.
The mode sigma? fields are read if present otherwise are constructed and
initialised from the sigma field but all of the mode sigma? fields are written
for restart and the sigma field contains the sum.
References:
http://en.wikipedia.org/wiki/Generalized_Maxwell_model
Wiechert, E. (1889). Ueber elastische Nachwirkung.
(Doctoral dissertation, Hartungsche buchdr.).
Wiechert, E. (1893).
Gesetze der elastischen Nachwirkung für constante Temperatur.
Annalen der Physik, 286(11), 546-570.
The mean, prime2Mean and base now have default values:
{
mean on; // (default = on)
prime2Mean on; // (default = off)
base time; // time or iteration (default = time)
window 200; // optional averaging window
windowName w1; // optional window name (default = "")
}
so for the majority of cases for which these defaults are appropriate the
fieldAverage functionObject can now be specified in the functions entry in
controlDict thus:
functions
{
fieldAverage1
{
#includeEtc "caseDicts/postProcessing/fields/fieldAverage.cfg"
fields
(
U.air
U.water
alpha.air
p
);
}
}
also utilising the new fieldAverage.cfg file.
For cases in which these defaults are not appropriate, e.g. the prime2Mean is
also required the optional entries can be specified within sub-dictionaries for
each field, e.g.
fieldAverage1
{
#includeEtc "caseDicts/postProcessing/fields/fieldAverage.cfg"
fields
(
U
{
prime2Mean yes;
}
p
{
prime2Mean yes;
}
);
}
For example in the new tutorial case:
tutorials/incompressible/pimpleFoam/laminar/pitzDailyPulse
a cosine bell velocity pulse is specified at the inlet by directly defining the
code for it:
inlet
{
type uniformFixedValue;
uniformValue coded;
name pulse;
codeInclude
#{
#include "mathematicalConstants.H"
#};
code
#{
return vector
(
0.5*(1 - cos(constant::mathematical::twoPi*min(x/0.3, 1))),
0,
0
);
#};
}
which is then compiled automatically and linked into the running pimpleFoam
dynamically and executed to set the inlet velocity.
e.g. in tutorials/incompressible/pisoFoam/LES/motorBike/motorBike/system/cuttingPlane
surfaceFormat vtk;
writeFormat binary;
fields (p U);
selects writing the VTK surface files in binary format which significantly
speeds-up reading of the files in paraview.
Currently binary writing is supported in VTK and EnSight formats.
These cases now check for a mesh in geometrically identical cases and
copy rather than re-generate if possible. This reduces the run-time of
the test loop by about 20 minutes.
A surface geometry file should be stored in
$FOAM_TUTORIALS/resources/geometry if it is used in multiple cases,
otherwise it should be stored locally to the case. This change enforces
that across all tutorials.
to enable the calculation of the residence time for a fluid; mainly used in HVAC
analysis. E.g. residence time of air inside a ventilated room, see the new
tutorial roomResidenceTime.
Contributed by Tobias Holzmann
Rather than defining patches for all external block faces to provide name and
type use the defaultPatch entry to collect undefined faces into a single named
and typed patch, e.g.
defaultPatch
{
name walls;
type wall;
}
If the functionObject requires an object list rather than a field list the
non-named arguments are now inserted into the object list, for example
functions
{
#includeFunc writeObjects(kEpsilon:G)
}
which is equivalent to
functions
{
#includeFunc writeObjects(objects = (kEpsilon:G))
}
For example the generation term in the k-epsilon turbulence kEpsilon:G is a
temporary field that is specifically named and registered so that it can be
looked-up be the wall-function boundary conditions and requires slightly
different handling compared to normal temporary fields which are not registered.
The tutorials/incompressible/simpleFoam/pitzDaily case now demostrates this
functionality with the addition of
cacheTemporaryObjects
(
kEpsilon:G
);
functions
{
#includeFunc writeObjects(objects = (kEpsilon:G))
}
in controlDict which caches kEpsilon:G and writes it at every write time.
Both the functionObject call context (the command line for postProcess, and the
controlDict path for run-time post-precessing) and the configuration file
context where the arguments are substituted are now printed in the error
message, e.g.
postProcess -func 'patchAverage(name=inlet, ields=(p U))'
generates the message
--> FOAM FATAL IO ERROR:
Essential value for keyword 'fields' not set in function entry
patchAverage(name=inlet, ields=(p U))
in command line postProcess -func patchAverage(name=inlet, ields=(p U))
Placeholder value is <field_names>
file: /home/dm2/henry/OpenFOAM/OpenFOAM-dev/etc/caseDicts/postProcessing/surfaceFieldValue/patchAverage from line 13 to line 17.
and with the following in controlDict
functions
{
#includeFunc patchAverage(name=inlet, ields=(p U))
}
generates the message
--> FOAM FATAL IO ERROR:
Essential value for keyword 'fields' not set in function entry
patchAverage(name=inlet, ields=(p U))
in file /home/dm2/henry/OpenFOAM/OpenFOAM-dev/tutorials/incompressible/pimpleFoam/RAS/pitzDaily/system/controlDict at line 55
Placeholder value is <field_names>
file: /home/dm2/henry/OpenFOAM/OpenFOAM-dev/etc/caseDicts/postProcessing/surfaceFieldValue/patchAverage from line 13 to line 17.
which are now read directly from the thermophysicalProperties dictionary for
consistency with non-reacting mixture thermodynamics. The species thermo and
reactions lists can still be in separate files if convenient and included into
the thermophysicalProperties file using the standard dictionary #include.
The various temporary fields used to create the nuTilda equation sources are now
internal fields to avoid unnecessary evaluation of boundary conditions, lowering
storage and reducing CPU time, particularly when running in parallel. These
temporary fields are now named with respect to the model so that they can be
cached conveniently and written as required.
The LESRegion field can now be contructed on demand if it is requested as a
cached temporary field and written out for diagnostics if needed, for example in
the tutorials/incompressible/pisoFoam/LES/motorBike tutorial:
cacheTemporaryObjects
(
SpalartAllmarasDDES:LESRegion
);
functions
{
writeCachedObjects
{
type writeObjects;
libs ("libutilityFunctionObjects.so");
writeControl writeTime;
writeOption anyWrite;
objects
(
SpalartAllmarasDDES:LESRegion
);
}
#include "cuttingPlane"
#include "streamLines"
#include "forceCoeffs"
}
