executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces multiphaseEulerFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/multiphaseEuler.
Class
Foam::solvers::multiphaseEuler
Description
Solver module for a system of any number of compressible fluid phases with a
common pressure, but otherwise separate properties. The type of phase model
is run time selectable and can optionally represent multiple species and
in-phase reactions. The phase system is also run time selectable and can
optionally represent different types of momentum, heat and mass transfer.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
multiphaseEuler.C
See also
Foam::solvers::compressibleVoF
Foam::solvers::fluidSolver
Foam::solvers::incompressibleFluid
The thermodynamic density field is now named "rho" by default and only renamed
"thermo:rho" by solvers that create and maintain a separate continuity density
field which is named "rho". This change significantly simplifies and
standardises the specification of schemes and boundary conditions requiring
density as it is now always named "rho" or "rho.<phase>" unless under some very
unusual circumstances the thermodynamic rather than continuity density is
required for a solver maintaining both.
The advantage of this change is particularly noticeable for multiphase
simulations in which each phase has its own density now named "rho.<phase>"
rather than "thermo:rho.<phase>" as separate phase continuity density fields are
not required so for multiphaseEulerFoam the scheme specification:
"div\(alphaRhoPhi.*,\(p\|thermo:rho.*\)\)" Gauss limitedLinear 1;
is now written:
"div\(alphaRhoPhi.*,\(p\|rho.*\)\)" Gauss limitedLinear 1;
the new fluidThermophysicalTransportModel and solidThermophysicalTransportModel
are derived from thermophysicalTransportModel providing a consistent and unified
interface for heat transport within and between regions. Coupled and external
heat-transfer boundary conditions can now be written independent of the
thermophysical properties or transport modelling of the regions providing
greater flexibility, simpler code and reduces the maintenance overhead.
The previous fluidThermophysicalTransportModel typedef has been renamed
fluidThermoThermophysicalTransportModel as it is instantiated on fluidThermo,
freeing the name fluidThermophysicalTransportModel for the new base-class.
The surfaceFilm fvModel has been renamed surfaceFilms, and can now have
a number of independent film models specified.
For example, the hotBoxes tutorial could be modified to have separate
film regions for the boxes and for the floor. In which case, the names
of the separate films would need specifying as shown below.
surfaceFilms
{
type surfaceFilms;
surfaceFilms (boxesFilm floorFilm); // <-- new entry
libs ("libsurfaceFilmModels.so");
}
The old fvModel name, surfaceFilm, has been maintained for backwards
compatibility.
The Lagrangian surface film model now also requires the coupled
surfaceFilms to be specified when there is not just a single
default-named film. For example, in constant/cloudProperties:
subModels
{
surfaceFilmModel thermoSurfaceFilm;
thermoSurfaceFilmCoeffs
{
surfaceFilms (boxesFilm floorFilm); // <-- new entry
interactionType splashBai;
deltaWet 0.0005;
Adry 2630;
Awet 1320;
Cf 0.6;
}
...
}
This change resolves a mass-conservation issue caused by the handling of
absolute and relative fluxes in the construction of the transonic pressure
equation.
to handle isotropic and anisotropic is a consistent, general and extensible
manner, replacing the horrible hacks which were in solidThermo.
This is entirely consistent with thermophysicalTransportModel for fluids and
provides the q() and divq() for the solid energy conservation equations. The
transport model and properties are specified in the optional
thermophysicalTransport dictionary, the default model being isotropic if this
dictionary file is not present, thus providing complete backward-compatibility
for the common isotropic cases.
Anisotropic thermal conductivity is now handled in a much more general manner by
the anisotropic model:
Class
Foam::solidThermophysicalTransportModels::anisotropic
Description
Solid thermophysical transport model for anisotropic thermal conductivity
The anisotropic thermal conductivity field is evaluated from the solid
material anisotropic kappa specified in the physicalProperties dictionary
transformed into the global coordinate system using default
coordinate system and optionally additional coordinate systems specified
per-zone in the thermophysicalProperties dictionary.
Usage
Example of the anisotropic thermal conductivity specification in
thermophysicalProperties with two zone-based coordinate systems in
addition to the default:
\verbatim
model anisotropic;
// Default coordinate system
coordinateSystem
{
type cartesian;
origin (0 0 0);
coordinateRotation
{
type cylindrical;
e3 (1 0 0);
}
}
// Optional zone coordinate systems
zones
{
coil1
{
type cartesian;
origin (0.1 0.2 0.7);
coordinateRotation
{
type cylindrical;
e3 (0.5 0.866 0);
}
}
coil2
{
type cartesian;
origin (0.4 0.5 1);
coordinateRotation
{
type cylindrical;
e3 (0.866 0.5 0);
}
}
}
\endverbatim
This development required substantial rationalisation of solidThermo,
coordinateSystems and updates to the solid solver module, solidDisplacementFoam,
the wallHeatFlux functionObject, thermalBaffle and all coupled thermal boundary
conditions.
so that it can now be used with either the isothermalFluid or fluid solver
modules, thus supporting non-uniform fluid properties, compressibility and
thermal effect. This development makes the special potentialFreeSurfaceFoam
solver redundant as both the isothermalFluid and fluid solver modules are more
general and has been removed and replaced with a user redirection script.
The tutorials/multiphase/potentialFreeSurfaceFoam cases have been updated to run
with the isothermalFluid solver module:
tutorials/multiphase/potentialFreeSurfaceFoam/oscillatingBox
tutorials/multiphase/potentialFreeSurfaceFoam/movingOscillatingBox
which demonstrate how to upgrade potentialFreeSurfaceFoam cases to
isothermalFluid.
Replacing the specific twoPhaseChangeModel with a consistent and general fvModel
interface will support not just cavitation using the new compressible
VoFCavitation fvModel but also other phase-change and interface manipulation
models in the future and is easier to use for case-specific and other user
customisation.
Class
Foam::fv::compressible::VoFCavitation
Description
Cavitation fvModel
Usage
Example usage:
\verbatim
VoFCavitation
{
type VoFCavitation;
libs ("libcompressibleVoFCavitation.so");
model SchnerrSauer;
KunzCoeffs
{
pSat 2300; // Saturation pressure
UInf 20.0;
tInf 0.005; // L = 0.1 m
Cc 1000;
Cv 1000;
}
MerkleCoeffs
{
pSat 2300; // Saturation pressure
UInf 20.0;
tInf 0.005; // L = 0.1 m
Cc 80;
Cv 1e-03;
}
SchnerrSauerCoeffs
{
pSat 2300; // Saturation pressure
n 1.6e+13;
dNuc 2.0e-06;
Cc 1;
Cv 1;
}
}
\endverbatim
The cavitating ballValve tutorial has been updated to use the new VoFCavitation
fvModel.
Replacing the specific twoPhaseChangeModel with a consistent and general fvModel
interface will support not just cavitation using the new VoFCavitation fvModel
but also other phase-change and interface manipulation models in the future and
is easier to use for case-specific and other user customisation.
rather than p_rgh which introduces an imbalance between the pressure and
buoyancy forces. The relaxation factor for p_rgh specified in fvSolution is
used to relax the net force as the intent is to relax the pressure and this
provides convenient usage and backwards-compatibility.
Optional relaxation for the thermodynamic pressure p is also available for case
this provides convergence benefit for steady cases by relaxing the pressure work
term is the energy equation.
Note these changes only relate to the operation of the isothermalFluid solver
module for buoyant cases.
to regain the behaviour of rhoPimpleFoam in OpenFOAM-9 which is more robust than
the potentially more consistent and accurate flux correction approach in
OpenFOAM-10.
This completes the separation between thermodynamics and thermophysical
transport modelling and all models and boundary conditions involving heat
transfer now obtain the transport coefficients from the appropriate
ThermophysicalTransportModels rather than from fluidThermo.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleVoF.
Class
Foam::solvers::compressibleVoF
Description
Solver module for for 2 compressible, non-isothermal immiscible fluids
using a VOF (volume of fluid) phase-fraction based interface capturing
approach, with optional mesh motion and mesh topology changes including
adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
compressibleVoF.C
See also
Foam::solvers::fluidSolver
MRF (multiple reference frames) can now be used to simulate SRF (single
reference frame) cases by defining the MRF zone to include all the cells is the
mesh and applying appropriate boundary conditions. The huge advantage of this
is that MRF can easily be added to any solver by the addition of forcing terms
in the momentum equation and absolute velocity to relative flux conversions in
the formulation of the pressure equation rather than having to reformulate the
momentum and pressure system based on the relative velocity as in traditional
SRF. Also most of the OpenFOAM solver applications and all the solver modules
already support MRF.
To enable this generalisation of MRF the transformations necessary on the
velocity boundary conditions in the MRF zone can no longer be handled by the
MRFZone class itself but special adapted fvPatchFields are required. Although
this adds to the case setup it provides much greater flexibility and now complex
inlet/outlet conditions can be applied within the MRF zone, necessary for some
SRF case and which was not possible in the original MRF implementation. Now for
walls rotating within the MRF zone the new 'MRFnoSlip' velocity boundary
conditions must be applied, e.g. in the
tutorials/modules/incompressibleFluid/mixerVessel2DMRF/constant/MRFProperties
case:
boundaryField
{
rotor
{
type MRFnoSlip;
}
stator
{
type noSlip;
}
front
{
type empty;
}
back
{
type empty;
}
}
similarly for SRF cases, e.g. in the
tutorials/modules/incompressibleFluid/mixerSRF case:
boundaryField
{
inlet
{
type fixedValue;
value uniform (0 0 -10);
}
outlet
{
type pressureInletOutletVelocity;
value $internalField;
}
rotor
{
type MRFnoSlip;
}
outerWall
{
type noSlip;
}
cyclic_half0
{
type cyclic;
}
cyclic_half1
{
type cyclic;
}
}
For SRF case all the cells should be selected in the MRFproperties dictionary
which is achieved by simply setting the optional 'selectionMode' entry to all,
e.g.:
SRF
{
selectionMode all;
origin (0 0 0);
axis (0 0 1);
rpm 1000;
}
In the above the rotational speed is set in RPM rather than rad/s simply by
setting the 'rpm' entry rather than 'omega'.
The tutorials/modules/incompressibleFluid/rotor2DSRF case is more complex and
demonstrates a transient SRF simulation of a rotor requiring the free-stream
velocity to rotate around the apparently stationary rotor which is achieved
using the new 'MRFFreestreamVelocity' velocity boundary condition. The
equivalent simulation can be achieved by simply rotating the entire mesh and
keeping the free-stream flow stationary and this is demonstrated in the
tutorials/modules/incompressibleFluid/rotor2DRotating case for comparison.
The special SRFSimpleFoam and SRFPimpleFoam solvers are now redundant and have
been replaced by redirection scripts providing details of the case migration
process.
The time step adjustment now starts from the minimum of the deltaT
calculated from Courant condition (and other physical limits), and the
deltaT specified in the system/controlDict.
This means that a small deltaT setting in system/controlDict results in
a gradual increase up to the Courant number limited value. This can be
useful in maintaining stability at the start of a simulation.
This functionality is an accidental side-effect at best. It is being
reinstated as existing cases are reliant upon it. If additional control
of the time step in the initial stages of a simulation is needed, then
that should be achieved with a more explicit user control.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces pimpleFoam, pisoFoam and simpleFoam and all
the corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleFluid.
Class
Foam::solvers::incompressibleFluid
Description
Solver module for steady or transient turbulent flow of incompressible
isothermal fluids with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
incompressibleFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
