This simplifies and standardises the handling of radiation in all solvers which
include an energy equation, all of which now support radiation via the
'radiation' fvOption which is selected in the constant/fvOption or
constant/<region>/fvOption file:
radiation
{
type radiation;
libs ("libradiationModels.so");
}
The radiation model, parameters, settings and sub-models are specified in the
'radiationProperties' file as before.
It is better to not select and instantiate a model, fvOption etc. than to create
it and set it inactive as the creation process requires reading of settings,
parameters, fields etc. with all the associated specification and storage
without being used. Also the incomplete implementation added a lot of
complexity in the low-level operation of models introducing a significant
maintenance overhead and development overhead for new models.
and renamed defaultSpecie as its mass fraction is derived from the sum of the
mass fractions of all other species and it need not be inert but must be present
everywhere, e.g. N2 in air/fuel combustion which can be involved in the
production of NOx.
The previous name inertSpecie in thermophysicalProperties is supported for
backward compatibility.
The standard set of Lagrangian clouds are now selectable at run-time.
This means that a solver that supports Lagrangian modelling can now use
any type of cloud (with some restrictions). Previously, solvers were
hard-coded to use specific cloud modelling. In addition, a cloud-list
structure has been added so that solvers may select multiple clouds,
rather than just one.
The new system is controlled as follows:
- If only a single cloud is required, then the settings for the
Lagrangian modelling should be placed in a constant/cloudProperties
file.
- If multiple clouds are required, then a constant/clouds file should be
created containing a list of cloud names defined by the user. Each
named cloud then reads settings from a corresponding
constant/<cloudName>Properties file. Clouds are evolved sequentially
in the order in which they are listed in the constant/clouds file.
- If no clouds are required, then the constant/cloudProperties file and
constant/clouds file should be omitted.
The constant/cloudProperties or constant/<cloudName>Properties files are
the same as previous cloud properties files; e.g.,
constant/kinematicCloudProperties or constant/reactingCloud1Properties,
except that they now also require an additional top-level "type" entry
to select which type of cloud is to be used. The available options for
this entry are:
type cloud; // A basic cloud of solid
// particles. Includes forces,
// patch interaction, injection,
// dispersion and stochastic
// collisions. Same as the cloud
// previously used by
// rhoParticleFoam
// (uncoupledKinematicParticleFoam)
type collidingCloud; // As "cloud" but with resolved
// collision modelling. Same as the
// cloud previously used by DPMFoam
// and particleFoam
// (icoUncoupledKinematicParticleFoam)
type MPPICCloud; // As "cloud" but with MPPIC
// collision modelling. Same as the
// cloud previously used by
// MPPICFoam.
type thermoCloud; // As "cloud" but with
// thermodynamic modelling and heat
// transfer with the carrier phase.
// Same as the limestone cloud
// previously used by
// coalChemistryFoam.
type reactingCloud; // As "thermoCloud" but with phase
// change and mass transfer
// coupling with the carrier
// phase. Same as the cloud
// previously used in fireFoam.
type reactingMultiphaseCloud; // As "reactingCloud" but with
// particles that contain multiple
// phases. Same as the clouds
// previously used in
// reactingParcelFoam and
// simpleReactingParcelFoam and the
// coal cloud used in
// coalChemistryFoam.
type sprayCloud; // As "reactingCloud" but with
// additional spray-specific
// collision and breakup modelling.
// Same as the cloud previously
// used in sprayFoam and
// engineFoam.
The first three clouds are not thermally coupled, so are available in
all Lagrangian solvers. The last four are thermally coupled and require
access to the carrier thermodynamic model, so are only available in
compressible Lagrangian solvers.
This change has reduced the number of solvers necessary to provide the
same functionality; solvers that previously differed only in their
Lagrangian modelling can now be combined. The Lagrangian solvers have
therefore been consolidated with consistent naming as follows.
denseParticleFoam: Replaces DPMFoam and MPPICFoam
reactingParticleFoam: Replaces sprayFoam and coalChemistryFoam
simpleReactingParticleFoam: Replaces simpleReactingParcelFoam
buoyantReactingParticleFoam: Replaces reactingParcelFoam
fireFoam and engineFoam remain, although fireFoam is likely to be merged
into buoyantReactingParticleFoam in the future once the additional
functionality it provides is generalised.
Some additional minor functionality has also been added to certain
solvers:
- denseParticleFoam has a "cloudForceSplit" control which can be set in
system/fvOptions.PIMPLE. This provides three methods for handling the
cloud momentum coupling, each of which have different trade-off-s
regarding numerical artefacts in the velocity field. See
denseParticleFoam.C for more information, and also bug report #3385.
- reactingParticleFoam and buoyantReactingParticleFoam now support
moving mesh in order to permit sharing parts of their implementation
with engineFoam.
