3599b8918b
UList, FixedList: Correct swap member function
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1787
2015-07-15 12:10:05 +01:00
30af1cdbc4
cellCoBlended: New surfaceInterpolation scheme based on CoBlended using the cell-based Courant number
...
This scheme is equivalent to the CoBlended scheme except that the Courant
number is evaluated for cells using the same approach as use in the
finite-volume solvers and then interpolated to the faces rather than being
estimated directly at the faces based on the flux. This is a more
consistent method for evaluating the Courant number but suffers from the
need to interpolate which introduces a degree of freedom. However, the
interpolation scheme for "Co" is run-time selected and may be specified in
"interpolationSchemes" and "localMax" might be most appropriate.
Example of the cellCoBlended scheme specification using LUST for Courant
numbers less than 1 and linearUpwind for Courant numbers greater than 10:
\verbatim
divSchemes
{
.
.
div(phi,U) Gauss cellCoBlended 1 LUST grad(U) 10 linearUpwind grad(U);
.
.
}
interpolationSchemes
{
.
.
interpolate(Co) localMax;
.
.
}
\endverbatim
2015-07-14 13:39:57 +01:00
48b96926c6
foamCreateVideo: fix framerate option with avconv
2015-07-14 09:28:03 +01:00
7044767525
filmViscosityModel/constantViscosity: Update viscosity to support Arrhenius modification
2015-07-12 20:44:55 +01:00
a8f61f210f
blockMesh: added experimental fast-merge algorithm
...
The standard merge-algorithm is N^2 over the face-points and uses a
geometric proximity test for the merge. These are both choices for
implementation simplicity and are rather inefficient for large meshes.
I have now implemented an experimental linear topological merge
algorithm which is VERY fast and effective for meshes of any size.
Currently it will merge internal faces on meshes of arbitrary complexity
but does not yet handle edge or face collapse needed for wedges and
other degenerate blocks.
The new fast-merge algorithm may be selected using the optional
"fastMerge" entry:
fastMerge yes;
and if not present the standard N^2 algorithm will be used.
Henry G. Weller
CFD Direct
2015-07-12 20:32:25 +01:00
45abf98521
foamCreateVideo: enabled to use avconv and output WebM format
...
Resolves feature request http://www.openfoam.org/mantisbt/view.php?id=1722
2015-07-12 12:58:50 +01:00
37cde0ce8b
paraFoam: added option to open ParaView
...
when OpenFOAM-format case files are not located
2015-07-07 10:56:11 +01:00
407dccefce
Updated template cases for new turbulenceProperties file, fvSchemes syntax and MRFProperties.
...
With contribution from Richard Jones
2015-07-06 10:23:40 +01:00
24a666a6c2
blockMesh: Improve block merge face correspondence test
2015-07-05 18:23:37 +01:00
3a6f0ac896
tutorials/compressible/rhoSimpleFoam/squareBend: update application
2015-07-05 18:23:05 +01:00
3f4dc50d8a
blockMesh: Correct handling of the -case option
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1773
2015-07-04 23:35:16 +01:00
5b9303962b
saturationModels: Added a model for constant pSat and Tsat
2015-07-04 14:48:19 +01:00
b020234d39
saturationModels: Added Tsat function
...
Currently this is implemented only for the Antoine equation, for the
other more complex models an iterative inversion from pressure to
temperature is required.
2015-07-04 14:46:55 +01:00
007451a616
reactingTwoPhaseEulerFoam: Completed mass-transfer terms in both forms of momentum equations
2015-07-03 23:18:25 +01:00
e8d45b1d3c
reactingTwoPhaseEulerFoam: Replace x*pos(x) with posPart(x) and same for neg
2015-07-03 18:04:34 +01:00
43030b7fbc
src/OpenFOAM: Added posPart and negPart functions
...
posPart returns a value or field in which the value or values are set to
0 if negative
negPart returns a value or field in which the value or values are set to
0 if positive
2015-07-03 18:02:24 +01:00
89bce95441
reactingTwoPhaseEulerFoam: Updated wmake files
2015-07-03 17:44:34 +01:00
025fe65d02
reactingTwoPhaseEulerFoam: Renamed saturationPressureModel -> saturationModel
...
In preparation for adding the Tsat function
2015-07-03 16:15:09 +01:00
52cde47fc5
Removed temporary Info statement
2015-07-03 15:47:25 +01:00
3966ffc0db
reactingTwoPhaseEulerFoam: Added mass-exchange contribution to the cell-based momentum equations
2015-07-03 15:46:52 +01:00
678a50bd06
reactingTwoPhaseEulerFoam: Changed the handling of the energy transfer
...
for consistency with the evaluation of the interface temperature.
2015-07-03 15:45:56 +01:00
3c209a32e9
rotorDiskSource: Debugged the duplicated interpolation functions
...
Needs rewriting to avoid unnecessary code duplication, preferably using
standard OpenFOAM interpolation functionality.
2015-07-03 12:41:25 +01:00
bb5bc559d4
reactingTwoPhaseEulerFoam: Corrected handling of heat-transfer caused by mass-transfer
2015-07-02 22:51:06 +01:00
f1f2c0a9f1
reactingTwoPhaseEulerFoam/pU/pEqn: Added missing dmdt terms
2015-07-02 22:50:44 +01:00
9794225b49
meanVelocityForce: Added selectionMode to example dict
2015-07-02 09:46:56 +01:00
83961e1de1
tutorials/incompressible/simpleFoam/rotorDisk: Tutorial for the rotorDiskSource functionObject
...
Provided by Richard Jones
2015-07-01 12:37:21 +01:00
7bf57f6b2b
fvOptions/sources/derived/rotorDiskSource: Added more documentation
...
Provided by Richard Jones
2015-07-01 11:02:32 +01:00
d5c8a45f5c
EEqn: Added rho*(U&g) source term
...
Generally this term has a VERY small effect on temperature, it is only
important for low-speed buoyancy-dominated flows.
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1755
See also http://cfd.direct/openfoam/energy-equation/
2015-07-01 10:53:37 +01:00
6b4ff9fca5
patchMeanVelocityForce: Variant of patchMeanVelocityForce in which the velocity is averaged over a patch
...
rather than a cellSet
This is useful to drive mean flow in a duct with a non-uniform
cross-section.
2015-06-30 22:39:59 +01:00
3255714f72
meanVelocityForce: Updated and corrected documentation
2015-06-30 19:20:08 +01:00
6897692212
Renamed pressureGradientExplicitSource to meanVelocityForce
...
as it is the applied the force necessary to maintain the specified mean velocity
2015-06-30 19:13:16 +01:00
f741f546fd
pimpleFoam: Caching 1/A is no longer necessary
2015-06-30 16:07:42 +01:00
75bddf1c63
pisoFoam: Added MRF and fvOptions support
2015-06-30 15:21:00 +01:00
f275efddfa
kOmegaSSTSato: Cannot correct nut in the constructor
...
construction of the phases is not complete
2015-06-30 13:07:01 +01:00
a77070cde6
kOmegaSSTSato: Relocated to src/TurbulenceModels/phaseCompressible/RAS
2015-06-30 13:04:27 +01:00
2127051ad5
cellSource: Added weightedVolAverage option
...
faceSource: Added weightedAreaAverage option
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1769
2015-06-30 11:20:02 +01:00
0d024dd37d
Removed use of the deprecated "register" keyword
...
http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4340.html
2015-06-30 10:26:44 +01:00
6f53722dab
tutorials/multiphase/.*woPhaseEulerFoam/: Change outlet p_rgh BC to prghPressure
2015-06-29 19:36:57 +01:00
1f158f8f52
tutorials/multiphase/reactingTwoPhaseEulerFoam/RAS/bubbleColumnEvaporatingReacting: Correct initial pressure to 10bar
2015-06-29 16:09:33 +01:00
b8465c8469
localEulerDdt: Removed unnecessary template qualifiers
2015-06-29 14:18:24 +01:00
44c040dfda
LTS: Simplify the selection of LTS operation
2015-06-29 11:53:20 +01:00
5e3a0cdbbd
Pstream/mpi: Move mpi.h include to after the OpenFOAM includes
...
Resolves additional report http://www.openfoam.org/mantisbt/view.php?id=1474
2015-06-28 22:55:22 +01:00
8d49122685
Updated header
2015-06-28 21:43:54 +01:00
8b9163b5c7
Corrected the "See Also"
2015-06-28 21:43:32 +01:00
8d962c97ad
Update header
2015-06-28 21:43:21 +01:00
8729455377
LTS: Formalize the naming of the rDeltaT and rSubDeltaT fields
...
Now the specification of the LTS time scheme is simply:
ddtSchemes
{
default localEuler;
}
2015-06-28 21:41:40 +01:00
6043a0f3a8
reactingParcelFoam, coalChemistryFoam: Added LTS support
...
Replaces LTSReactingParcelFoam and LTSCoalChemistryFoam
Select LTS via the ddtScheme:
ddtSchemes
{
default localEuler rDeltaT;
}
2015-06-28 11:01:04 +01:00
bc840e8528
rhoReactingFoam, rhoReactingBuoyantFoam: Added LTS support
...
Select LTS via the ddtScheme:
ddtSchemes
{
default localEuler rDeltaT;
}
2015-06-27 22:41:00 +01:00
a11cf24741
reactingFoam: Added run-time selectable LTS support replacing LTSReactingFoam
...
Select LTS via the ddtScheme:
ddtSchemes
{
default localEuler rDeltaT;
}
2015-06-27 22:35:49 +01:00
0acc57e105
rhoPimpleFoam: Added run-time selectable LTS support replacing rhoLTSPimpleFoam
...
Select LTS via the ddtScheme:
ddtSchemes
{
default localEuler rDeltaT;
}
2015-06-27 22:08:43 +01:00
