This implicit isotropic damping function relaxes the velocity field towards a
specified uniform value which can be set to (0 0 0) if no flow is required.
This is particularly appropriate to damp the waves in a closed wave tank with no
mean flow.
Testing on the interFoam wave has shown that for this simple case with uniform
mean flow the new isotropicDamping fvOption provides more rapid and complete
damping than the original verticalDamping.
With the inclusion of boundary layer modelling in the gas, the
separation of wave perturbation from and mean flow became less useful,
and potentially prevents further extension to support similar boundary
layer modelling in the liquid.
The mean velocity entry, UMean, is now needed in the
constant/waveProperties file rather than in the waveVelocity boundary
condition.
In order to increase the flexibility of the wave library, the mean flow
handling has been removed from the waveSuperposition class. This makes
waveSuperposition work purely in terms of perturbations to a mean
background flow.
The input has also been split, with waves now defined as region-wide
settings in constant/waveProperties. The mean flow parameters are sill
defined by the boundary conditions.
The new format of the velocity boundary is much simpler. Only a mean
flow velocity is required.
In 0/U:
boundaryField
{
inlet
{
type waveVelocity;
UMean (2 0 0);
}
// etc ...
}
Other wave boundary conditions have not changed.
The constant/waveProperties file contains the wave model selections and
the settings to define the associated coordinate system and scaling
functions:
In constant/waveProperties:
origin (0 0 0);
direction (1 0 0);
waves
(
Airy
{
length 300;
amplitude 2.5;
phase 0;
angle 0;
}
);
scale table ((1200 1) (1800 0));
crossScale constant 1;
setWaves has been changed to use a system/setWavesDict file rather than
relying on command-line arguments. It also now requires a mean velocity
to be specified in order to prevent ambiguities associated with multiple
inlet patches. An example is shown below:
In system/setWavesDict:
alpha alpha.water;
U U;
liquid true;
UMean (1 0 0);
This is to make it clear that the value supplied is the scalar mean
velocity normal to the patch, and to distinguish it from other instances
of the keyword "UMean" which take a vector quantity.
The Scaled Function1 removes the need for classes to hold both a value
and a ramping function. If it is desired to ramp up a velocity up to
(10 0 0) over the space of 5 seconds, that can be achieved as follows:
velocity
{
type scale;
scale
{
type halfCosineRamp;
duration 5;
}
value (10 0 0);
}
Also, as a result of this change, the velocityRamping fvOption has
become a general acceleration source, based on a velocity Function1. It
has therefore been renamed accelerationSource.
Now for transient simulations "Final" solver settings are required for ALL
equations providing consistency between the solution of velocity, energy,
composition and radiation properties.
However "Final" relaxation factors are no longer required for fields or
equations and if not present the standard value for the variable will be
applied. Given that relaxation factors other than 1 are rarely required for
transient runs and hence the same for all iterations including the final one
this approach provide simpler input while still providing the flexibility to
specify a different value for the final iteration if required. For steady cases
it is usual to execute just 1 outer iteration per time-step for which the
standard relaxation factors are appropriate, and if more than one iteration is
executed it is common to use the same factors for both. In the unlikely event
of requiring different relaxation factors for the final iteration this is still
possible to specify via the now optional "Final" specification.
With the -noFields option the mesh is subset but the fields are not changed.
This is useful when the field fields have been created to correspond to the mesh
after the mesh subset.
The implementation of the porousBafflePressure BC was incorrect in OpenFOAM-2.4
and earlier and corrected during the turbulence modeling rewrite for
OpenFOAM-3.0. This update introduced the density scaling required for the
definition of pressure in interFoam which requires the porosity coefficients to
be reduced.
Resolves bug-report https://bugs.openfoam.org/view.php?id=2890
Now if a <field> file does not exist first the compressed <field>.gz file is
searched for and if that also does not exist the <field>.orig file is searched
for.
This simplifies case setup and run scripts as now setField for example can read
the <field>.orig file directly and generate the <field> file from it which is
then read by the solver. Additionally the cleanCase function used by
foamCleanCase and the Allclean scripts automatically removed <field> files if
there is a corresponding <field>.orig file. So now there is no need for the
Allrun scripts to copy <field>.orig files into <field> or for the Allclean
scripts to explicitly remove them.
The onset of vertical damping can now be graduated over a distance. The
user specifies an origin and a direction along which the graduation
occurs, and a ramping function to specify the form of the graduation. An
example specification for the fvOption is:
verticalDamping1
{
type verticalDamping;
selectionMode all;
origin (1200 0 0);
direction (1 0 0);
ramp
{
type halfCosineRamp;
start 0;
duration 600;
}
lambda [0 0 -1 0 0 0 0] 1; // Damping coefficient
timeStart 0;
duration 1e6;
}
If the origin, direction or ramp entries are omitted then the fvOption
functions as before; applying the damping to the entire volume or the
specified cell set.
This work was supported by Jan Kaufmann and Jan Oberhagemann at DNV GL.
Using the noSlip boundary condition for rotating wall in an MRF region
interferes with post-processing by resetting the wall velocity to 0 rather than
preserving the value set by the MRF zone.
and replaced interDyMFoam with a script which reports this change.
The interDyMFoam tutorials have been moved into the interFoam directory.
This change is one of a set of developments to merge dynamic mesh functionality
into the standard solvers to improve consistency, usability, flexibility and
maintainability of these solvers.
Henry G. Weller
CFD Direct Ltd.
except turbulence and lagrangian which will also be updated shortly.
For example in the nonNewtonianIcoFoam offsetCylinder tutorial the viscosity
model coefficients may be specified in the corresponding "<type>Coeffs"
sub-dictionary:
transportModel CrossPowerLaw;
CrossPowerLawCoeffs
{
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
}
BirdCarreauCoeffs
{
nu0 [0 2 -1 0 0 0 0] 1e-06;
nuInf [0 2 -1 0 0 0 0] 1e-06;
k [0 0 1 0 0 0 0] 0;
n [0 0 0 0 0 0 0] 1;
}
which allows a quick change between models, or using the simpler
transportModel CrossPowerLaw;
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
if quick switching between models is not required.
To support this more convenient parameter specification the inconsistent
specification of seedSampleSet in the streamLine and wallBoundedStreamLine
functionObjects had to be corrected from
// Seeding method.
seedSampleSet uniform; //cloud; //triSurfaceMeshPointSet;
uniformCoeffs
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
to the simpler
// Seeding method.
seedSampleSet
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
which also support the "<type>Coeffs" form
// Seeding method.
seedSampleSet
{
type uniform;
uniformCoeffs
{
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
}
For example the actuationDiskSource fvOption may now be specified
disk1
{
type actuationDiskSource;
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
rather than
disk1
{
type actuationDiskSource;
active on;
actuationDiskSourceCoeffs
{
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
}
but this form is supported for backward compatibility.
These models have been particularly designed for use in the VoF solvers, both
incompressible and compressible. Currently constant and temperature dependent
surface tension models are provided but it easy to write models in which the
surface tension is evaluated from any fields held by the mesh database.
