The unreliable extrapolateProfile option has been replaced by the more flexible
and reliable profile option which allows the velocity profile to be specified as
a Function1 of the normalised distance to the wall. To simplify the
specification of the most common velocity profiles the new laminarBL (quadratic
profile) and turbulentBL (1/7th power law) Function1s are provided.
In addition to the new profile option the flow rate can now be specified as a
meanVelocity, volumetricFlowRate or massFlowRate, all of which are Function1s of
time.
The following tutorials have been updated to use the laminarBL profile:
multiphase/multiphaseEulerFoam/laminar/titaniaSynthesis
multiphase/multiphaseEulerFoam/laminar/titaniaSynthesisSurface
The following tutorials have been updated to use the turbulentBL profile:
combustion/reactingFoam/Lagrangian/verticalChannel
combustion/reactingFoam/Lagrangian/verticalChannelLTS
combustion/reactingFoam/Lagrangian/verticalChannelSteady
compressible/rhoPimpleFoam/RAS/angledDuct
compressible/rhoPimpleFoam/RAS/angledDuctLTS
compressible/rhoPimpleFoam/RAS/squareBendLiq
compressible/rhoPorousSimpleFoam/angledDuctImplicit
compressible/rhoSimpleFoam/angledDuctExplicitFixedCoeff
compressible/rhoSimpleFoam/squareBend
compressible/rhoSimpleFoam/squareBendLiq
heatTransfer/chtMultiRegionFoam/shellAndTubeHeatExchanger
heatTransfer/chtMultiRegionFoam/shellAndTubeHeatExchanger
incompressible/porousSimpleFoam/angledDuctImplicit
incompressible/porousSimpleFoam/straightDuctImplicit
multiphase/interFoam/RAS/angledDuct
Class
Foam::flowRateInletVelocityFvPatchVectorField
Description
Velocity inlet boundary condition creating a velocity field with
optionally specified profile normal to the patch adjusted to match the
specified mass flow rate, volumetric flow rate or mean velocity.
For a mass-based flux:
- the flow rate should be provided in kg/s
- if \c rho is "none" the flow rate is in m3/s
- otherwise \c rho should correspond to the name of the density field
- if the density field cannot be found in the database, the user must
specify the inlet density using the \c rhoInlet entry
For a volumetric-based flux:
- the flow rate is in m3/s
Usage
\table
Property | Description | Required | Default value
massFlowRate | Mass flow rate [kg/s] | no |
volumetricFlowRate | Volumetric flow rate [m^3/s]| no |
meanVelocity | Mean velocity [m/s]| no |
profile | Velocity profile | no |
rho | Density field name | no | rho
rhoInlet | Inlet density | no |
alpha | Volume fraction field name | no |
\endtable
Example of the boundary condition specification for a volumetric flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
volumetricFlowRate 0.2;
profile laminarBL;
}
\endverbatim
Example of the boundary condition specification for a mass flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
massFlowRate 0.2;
profile turbulentBL;
rho rho;
rhoInlet 1.0;
}
\endverbatim
Example of the boundary condition specification for a volumetric flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
meanVelocity 5;
profile turbulentBL;
}
\endverbatim
The \c volumetricFlowRate, \c massFlowRate or \c meanVelocity entries are
\c Function1 of time, see Foam::Function1s.
The \c profile entry is a \c Function1 of the normalised distance to the
wall. Any suitable Foam::Function1s can be used including
Foam::Function1s::codedFunction1 but Foam::Function1s::laminarBL and
Foam::Function1s::turbulentBL have been created specifically for this
purpose and are likely to be appropriate for most cases.
Note
- \c rhoInlet is required for the case of a mass flow rate, where the
density field is not available at start-up
- The value is positive into the domain (as an inlet)
- May not work correctly for transonic inlets
- Strange behaviour with potentialFoam since the U equation is not solved
See also
Foam::fixedValueFvPatchField
Foam::Function1s::laminarBL
Foam::Function1s::turbulentBL
Foam::Function1s
Foam::flowRateOutletVelocityFvPatchVectorField
to provide a single consistent code and user interface to the specification of
physical properties in both single-phase and multi-phase solvers. This redesign
simplifies usage and reduces code duplication in run-time selectable solver
options such as 'functionObjects' and 'fvModels'.
* physicalProperties
Single abstract base-class for all fluid and solid physical property classes.
Physical properties for a single fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties' dictionary.
Physical properties for a phase fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties.<phase>' dictionary.
This replaces the previous inconsistent naming convention of
'transportProperties' for incompressible solvers and
'thermophysicalProperties' for compressible solvers.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the
'physicalProperties' dictionary does not exist.
* phaseProperties
All multi-phase solvers (VoF and Euler-Euler) now read the list of phases and
interfacial models and coefficients from the
'constant/<region>/phaseProperties' dictionary.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the 'phaseProperties'
dictionary does not exist. For incompressible VoF solvers the
'transportProperties' is automatically upgraded to 'phaseProperties' and the
two 'physicalProperties.<phase>' dictionary for the phase properties.
* viscosity
Abstract base-class (interface) for all fluids.
Having a single interface for the viscosity of all types of fluids facilitated
a substantial simplification of the 'momentumTransport' library, avoiding the
need for a layer of templating and providing total consistency between
incompressible/compressible and single-phase/multi-phase laminar, RAS and LES
momentum transport models. This allows the generalised Newtonian viscosity
models to be used in the same form within laminar as well as RAS and LES
momentum transport closures in any solver. Strain-rate dependent viscosity
modelling is particularly useful with low-Reynolds number turbulence closures
for non-Newtonian fluids where the effect of bulk shear near the walls on the
viscosity is a dominant effect. Within this framework it would also be
possible to implement generalised Newtonian models dependent on turbulent as
well as mean strain-rate if suitable model formulations are available.
* visosityModel
Run-time selectable Newtonian viscosity model for incompressible fluids
providing the 'viscosity' interface for 'momentumTransport' models.
Currently a 'constant' Newtonian viscosity model is provided but the structure
supports more complex functions of time, space and fields registered to the
region database.
Strain-rate dependent non-Newtonian viscosity models have been removed from
this level and handled in a more general way within the 'momentumTransport'
library, see section 'viscosity' above.
The 'constant' viscosity model is selected in the 'physicalProperties'
dictionary by
viscosityModel constant;
which is equivalent to the previous entry in the 'transportProperties'
dictionary
transportModel Newtonian;
but backward-compatibility is provided for both the keyword and model
type.
* thermophysicalModels
To avoid propagating the unnecessary constructors from 'dictionary' into the
new 'physicalProperties' abstract base-class this entire structure has been
removed from the 'thermophysicalModels' library. The only use for this
constructor was in 'thermalBaffle' which now reads the 'physicalProperties'
dictionary from the baffle region directory which is far simpler and more
consistent and significantly reduces the amount of constructor code in the
'thermophysicalModels' library.
* compressibleInterFoam
The creation of the 'viscosity' interface for the 'momentumTransport' models
allows the complex 'twoPhaseMixtureThermo' derived from 'rhoThermo' to be
replaced with the much simpler 'compressibleTwoPhaseMixture' derived from the
'viscosity' interface, avoiding the myriad of unused thermodynamic functions
required by 'rhoThermo' to be defined for the mixture.
Same for 'compressibleMultiphaseMixture' in 'compressibleMultiphaseInterFoam'.
This is a significant improvement in code and input consistency, simplifying
maintenance and further development as well as enhancing usability.
Henry G. Weller
CFD Direct Ltd.
When using 'simple' or 'hierarchical' decomposition it is useful to slightly rotate a
coordinate-aligned block-mesh to improve the processor boundaries by avoiding
irregular cell distribution at those boundaries. The degree of slight rotation
is controlled by the 'delta' coefficient and a value of 0.001 is generally
suitable so to avoid unnecessary clutter in 'decomposeParDict' 'delta' now
defaults to this value.
The FOAM file format has not changed from version 2.0 in many years and so there
is no longer a need for the 'version' entry in the FoamFile header to be
required and to reduce unnecessary clutter it is now optional, defaulting to the
current file format 2.0.
This makes usage of transformPoints the same as for
surfaceTransformPoints. Transformations are supplied as a string and are
applied in sequence.
Usage
transformPoints "\<transformations\>" [OPTION]
Supported transformations:
- "translate=<translation vector>"
Translational transformation by given vector
- "rotate=(<n1 vector> <n2 vector>)"
Rotational transformation from unit vector n1 to n2
- "Rx=<angle [deg] about x-axis>"
Rotational transformation by given angle about x-axis
- "Ry=<angle [deg] about y-axis>"
Rotational transformation by given angle about y-axis
- "Rz=<angle [deg] about z-axis>"
Rotational transformation by given angle about z-axis
- "Ra=<axis vector> <angle [deg] about axis>"
Rotational transformation by given angle about given axis
- "scale=<x-y-z scaling vector>"
Anisotropic scaling by the given vector in the x, y, z
coordinate directions
Example usage:
transformPoints \
"translate=(-0.05 -0.05 0), \
Rz=45, \
translate=(0.05 0.05 0)"
To provide more flexibility, extensibility, run-time modifiability and
consistency the handling of optional pressure limits has been moved from
pressureControl (settings in system/fvSolution) to the new limitPressure
fvConstraint (settings in system/fvConstraints).
All tutorials have been updated which provides guidance when upgrading cases but
also helpful error messages are generated for cases using the old settings
providing specific details as to how the case should be updated, e.g. for the
tutorials/compressible/rhoSimpleFoam/squareBend case which has the pressure
limit specification:
SIMPLE
{
...
pMinFactor 0.1;
pMaxFactor 2;
...
generates the error message
--> FOAM FATAL IO ERROR:
Pressure limits should now be specified in fvConstraints:
limitp
{
type limitPressure;
minFactor 0.1;
maxFactor 2;
}
file: /home/dm2/henry/OpenFOAM/OpenFOAM-dev/tutorials/compressible/rhoSimpleFoam/squareBend/system/fvSolution/SIMPLE from line 41 to line 54.
The new fvModels is a general interface to optional physical models in the
finite volume framework, providing sources to the governing conservation
equations, thus ensuring consistency and conservation. This structure is used
not only for simple sources and forces but also provides a general run-time
selection interface for more complex models such as radiation and film, in the
future this will be extended to Lagrangian, reaction, combustion etc. For such
complex models the 'correct()' function is provided to update the state of these
models at the beginning of the PIMPLE loop.
fvModels are specified in the optional constant/fvModels dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The new fvConstraints is a general interface to optional numerical constraints
applied to the matrices of the governing equations after construction and/or to
the resulting field after solution. This system allows arbitrary changes to
either the matrix or solution to ensure numerical or other constraints and hence
violates consistency with the governing equations and conservation but it often
useful to ensure numerical stability, particularly during the initial start-up
period of a run. Complex manipulations can be achieved with fvConstraints, for
example 'meanVelocityForce' used to maintain a specified mean velocity in a
cyclic channel by manipulating the momentum matrix and the velocity solution.
fvConstraints are specified in the optional system/fvConstraints dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The separation of fvOptions into fvModels and fvConstraints provides a rational
and consistent separation between physical and numerical models which is easier
to understand and reason about, avoids the confusing issue of location of the
controlling dictionary file, improves maintainability and easier to extend to
handle current and future requirements for optional complex physical models and
numerical constraints.
A number of fvOptions that apply to a user-derined field can now
automatically work what primitive type they apply to. These options can
apply to any field type, and in some cases even multiple fields of
differing type. Example usage of the options to which this change
applies are shown below:
codedSource1
{
type codedSource;
name codedSource1;
field h;
...
}
fixedValueConstraint1
{
type fixedValueConstraint;
fieldValues
{
R (1 0 0 1 0 1);
epsilon 150;
}
...
}
phaseLimitStabilization11
{
type phaseLimitStabilization;
field sigma.liquid;
...
}
Previously to apply to a given type, these options had to be selected
with the name of the type prepended to the option name (e.g., "type
symmTensorPhaseLimitStabilization;") and those that operated on multiple
fields were restricted to those fields being of the same type.
A number of other options have had improvements made to their handling
of user specification of fields. Where possible, the option will now
attempt to work out what field the option applies to automatically. The
following options, therefore, no longer require "field" or "fields"
entries:
actuationDiskSource
buoyancyEnergy
buoyancyForce
meanVelocityForce
rotorDiskSource
volumeFractionSource
constantHeatTransfer
function2HeatTransfer
variableHeatTransfer
Non-standard field names can be overridden in the same way as in
boundary conditions; e.g., the velocity name can be overridden with a "U
<UName>;" entry if it does not have the default name, "U". The name of
the energy field is now always determined from the thermodynamics
model and should always be correct. Some options that can be applied to
an individual phase also support a "phase <phaseName>;" entry;
fvOptions field-name handling has been rewritten to increase its
flexibility and to improve warning messages. The flexibility now allows
for options that apply to all fields, or all fields of a given phase,
rather than being limited to a specific list of field names. Messages
warning about options that have not been applied now always print just
once per time-step.
It is better to not select and instantiate a model, fvOption etc. than to create
it and set it inactive as the creation process requires reading of settings,
parameters, fields etc. with all the associated specification and storage
without being used. Also the incomplete implementation added a lot of
complexity in the low-level operation of models introducing a significant
maintenance overhead and development overhead for new models.
Most fvOptions change the state of the fields and equations they are applied to
but do not change internal state so it makes more sense that the interface is
const, consistent with MeshObjects. For the few fvOptions which do maintain a
changing state the member data is now mutable.
The new optional 'slash' scoping syntax is now the default and provides a more
intuitive and flexible syntax than the previous 'dot' syntax, corresponding to
the common directory/file access syntax used in UNIX, providing support for
reading entries from other dictionary files.
In the 'slash' syntax
'/' is the scope operator
'../' is the parent dictionary scope operator
'!' is the top-level dictionary scope operator
Examples:
internalField 3.4;
active
{
type fixedValue;
value.air $internalField;
}
inactive
{
type anotherFixedValue;
value $../active/value.air;
anotherValue $!active/value.air;
sub
{
value $../../active/value.air;
anotherValue $!active/value.air;
}
}
"U.*"
{
solver GAMG;
}
e.air
{
$U.air;
}
external
{
value $testSlashDict2!active/value.air;
}
active2
{
$testSlashDict2!active;
}
If there is a part of the keyword before the '!' then this is taken to be the
file name of the dictionary from which the entry will be looked-up using the
part of the keyword after the '!'. For example given a file testSlashDict containing
internalField 5.6;
active
{
type fixedValue;
value.air $internalField;
}
entries from it can be read directly from another file, e.g.
external
{
value $testSlashDict2!active/value.air;
}
active2
{
$testSlashDict2!active;
}
which expands to
external
{
value 5.6;
}
active2
{
type fixedValue;
value.air 5.6;
}
These examples are provided in applications/test/dictionary.
The the default syntax can be changed from 'slash' to 'dot' in etc/controlDict
to revert to the previous behaviour:
OptimisationSwitches
{
.
.
.
// Default dictionary scoping syntax
inputSyntax slash; // Change to dot for previous behaviour
}
or within a specific dictionary by adding the entry
See applications/test/dictionary/testDotDict.
All models that require templating on the thermodynamic model, including
the thermodynamic models themselves, are now instantiated using a
centralised set of variadic macros. Seven macros exist to instantiate
models for different classes of thermodynamics model. These are:
forGases: All model combinations valid for gases
forCommonGases: The most commonly used gas models
forAbsoluteGases: A limited selection of gas models with absolute
forms of energy, for use with Xi-combustion models
forLiquids: All model combinations valid for liquids
forCommonLiquids: The most commonly used liquid models
forPolynomials: Model combinations with properties fitted to
polynomials
forSolids: All model combinations valid for solids
All the *ThermoPhysics typedefs have been removed, as this system was
fundamentally not extensible. The enormous lists of thermodynamic
instantiations that existed for reaction thermos, chemistry models,
tabulation methods, etc..., were extremely difficult to read and reason
about what combinations are valid under what circumstances. This change
centralises those decisions, makes them concise and readable, and makes
them consistent across the entire codebase.
Soot model selection has now been brought up to date in line with
chemistry, combustion, and others. The angle-bracketed part of the name
is no longer necessary; this information is determined directly from the
existing thermo model. So, now to select a mixture-fraction soot model,
the entry is simply:
sootModel mixtureFraction;
Rather than:
sootModel mixtureFraction<rhoReactionThermo,gasHThermoPhysics>;
The only place in which *ThermoPhysics typedefs are still required in
the selection name is in the thermalBaffle1D boundary condition. Here
there is no thermo model from which to determine a name. This eventually
needs resolving either by adding a selection mechanism similar to that
of the thermo packages themselves, or by removing this boundary
condition in favour of the (non-1D) thermal baffle boundary condition
and region model.
Following the generalisation of the TurbulenceModels library to support
non-Newtonian laminar flow including visco-elasticity and extensible to other
form of non-Newtonian behaviour the name TurbulenceModels is misleading and does
not properly represent how general the OpenFOAM solvers now are. The
TurbulenceModels now provides an interface to momentum transport modelling in
general and the plan is to rename it MomentumTransportModels and in preparation
for this the turbulenceProperties dictionary has been renamed momentumTransport
to properly reflect its new more general purpose.
The old turbulenceProperties name is supported for backward-compatibility.
renaming the legacy keywords
RASModel -> model
LESModel -> model
laminarModel -> model
which is simpler and clear within the context in which they are specified, e.g.
RAS
{
model kOmegaSST;
turbulence on;
printCoeffs on;
}
rather than
RAS
{
RASModel kOmegaSST;
turbulence on;
printCoeffs on;
}
The old keywords are supported for backward compatibility.
A surface geometry file should be stored in
$FOAM_TUTORIALS/resources/geometry if it is used in multiple cases,
otherwise it should be stored locally to the case. This change enforces
that across all tutorials.
Rather than defining patches for all external block faces to provide name and
type use the defaultPatch entry to collect undefined faces into a single named
and typed patch, e.g.
defaultPatch
{
name walls;
type wall;
}
The tutorial demonstrates generation of a C-grid mesh using blockMesh
The geometry is provided by a surface mesh (OBJ file) of the NACA0012 aerofoil
The case is setup with a freestream flow speed of Ma=0.72
Thanks to Kai Bastos at Duke University for the geometry and helpful input.
For example the actuationDiskSource fvOption may now be specified
disk1
{
type actuationDiskSource;
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
rather than
disk1
{
type actuationDiskSource;
active on;
actuationDiskSourceCoeffs
{
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
}
but this form is supported for backward compatibility.
Both stardard SIMPLE and the SIMPLEC (using the 'consistent' option in
fvSolution) are now supported for both subsonic and transonic flow of all
fluid types.
rhoSimpleFoam now instantiates the lower-level fluidThermo which instantiates
either a psiThermo or rhoThermo according to the 'type' specification in
thermophysicalProperties, e.g.
thermoType
{
type hePsiThermo;
mixture pureMixture;
transport sutherland;
thermo janaf;
equationOfState perfectGas;
specie specie;
energy sensibleInternalEnergy;
}
instantiates a psiThermo for a perfect gas with JANAF thermodynamics, whereas
thermoType
{
type heRhoThermo;
mixture pureMixture;
properties liquid;
energy sensibleInternalEnergy;
}
mixture
{
H2O;
}
instantiates a rhoThermo for water, see new tutorial
compressible/rhoSimpleFoam/squareBendLiq.
In order to support complex equations of state the pressure can no longer be
unlimited and rhoSimpleFoam now limits the pressure rather than the density to
handle start-up more robustly.
For backward compatibility 'rhoMin' and 'rhoMax' can still be used in the SIMPLE
sub-dictionary of fvSolution which are converted into 'pMax' and 'pMin' but it
is better to set either 'pMax' and 'pMin' directly or use the more convenient
'pMinFactor' and 'pMinFactor' from which 'pMax' and 'pMin' are calculated using
the fixed boundary pressure or reference pressure e.g.
SIMPLE
{
nNonOrthogonalCorrectors 0;
pMinFactor 0.1;
pMaxFactor 1.5;
transonic yes;
consistent yes;
residualControl
{
p 1e-3;
U 1e-4;
e 1e-3;
"(k|epsilon|omega)" 1e-3;
}
}
The fundamental properties provided by the specie class hierarchy were
mole-based, i.e. provide the properties per mole whereas the fundamental
properties provided by the liquidProperties and solidProperties classes are
mass-based, i.e. per unit mass. This inconsistency made it impossible to
instantiate the thermodynamics packages (rhoThermo, psiThermo) used by the FV
transport solvers on liquidProperties. In order to combine VoF with film and/or
Lagrangian models it is essential that the physical propertied of the three
representations of the liquid are consistent which means that it is necessary to
instantiate the thermodynamics packages on liquidProperties. This requires
either liquidProperties to be rewritten mole-based or the specie classes to be
rewritten mass-based. Given that most of OpenFOAM solvers operate
mass-based (solve for mass-fractions and provide mass-fractions to sub-models it
is more consistent and efficient if the low-level thermodynamics is also
mass-based.
This commit includes all of the changes necessary for all of the thermodynamics
in OpenFOAM to operate mass-based and supports the instantiation of
thermodynamics packages on liquidProperties.
Note that most users, developers and contributors to OpenFOAM will not notice
any difference in the operation of the code except that the confusing
nMoles 1;
entries in the thermophysicalProperties files are no longer needed or used and
have been removed in this commet. The only substantial change to the internals
is that species thermodynamics are now "mixed" with mass rather than mole
fractions. This is more convenient except for defining reaction equilibrium
thermodynamics for which the molar rather than mass composition is usually know.
The consequence of this can be seen in the adiabaticFlameT, equilibriumCO and
equilibriumFlameT utilities in which the species thermodynamics are
pre-multiplied by their molecular mass to effectively convert them to mole-basis
to simplify the definition of the reaction equilibrium thermodynamics, e.g. in
equilibriumCO
// Reactants (mole-based)
thermo FUEL(thermoData.subDict(fuelName)); FUEL *= FUEL.W();
// Oxidant (mole-based)
thermo O2(thermoData.subDict("O2")); O2 *= O2.W();
thermo N2(thermoData.subDict("N2")); N2 *= N2.W();
// Intermediates (mole-based)
thermo H2(thermoData.subDict("H2")); H2 *= H2.W();
// Products (mole-based)
thermo CO2(thermoData.subDict("CO2")); CO2 *= CO2.W();
thermo H2O(thermoData.subDict("H2O")); H2O *= H2O.W();
thermo CO(thermoData.subDict("CO")); CO *= CO.W();
// Product dissociation reactions
thermo CO2BreakUp
(
CO2 == CO + 0.5*O2
);
thermo H2OBreakUp
(
H2O == H2 + 0.5*O2
);
Please report any problems with this substantial but necessary rewrite of the
thermodynamic at https://bugs.openfoam.org
Henry G. Weller
CFD Direct Ltd.
Description
Constrain the field values within a specified region.
For example to set the turbulence properties within a porous region:
\verbatim
porosityTurbulence
{
type scalarFixedValueConstraint;
active yes;
scalarFixedValueConstraintCoeffs
{
selectionMode cellZone;
cellZone porosity;
fieldValues
{
k 30.7;
epsilon 1.5;
}
}
}
\endverbatim
See tutorials/compressible/rhoSimpleFoam/angledDuctExplicitFixedCoeff
constant/fvOptions for an example of this fvOption in action.
so that the specification of the name and dimensions are optional in property dictionaries.
Update tutorials so that the name of the dimensionedScalar property is
no longer duplicated but optional dimensions are still provided and are
checked on read.
