Description
General cell set selection class for models that apply to sub-sets
of the mesh.
Currently supports cell selection from a set of points, a specified cellSet
or cellZone or all of the cells. The selection method can either be
specified explicitly using the \c selectionMode entry or inferred from the
presence of either a \c cellSet, \c cellZone or \c points entry. The \c
selectionMode entry is required to select \c all cells.
Usage
Examples:
\verbatim
// Apply everywhere
selectionMode all;
// Apply within a given cellSet
selectionMode cellSet; // Optional
cellSet rotor;
// Apply within a given cellZone
selectionMode cellZone; // Optional
cellSet rotor;
// Apply in cells containing a list of points
selectionMode points; // Optional
points
(
(2.25 0.5 0)
(2.75 0.5 0)
);
\endverbatim
Also used as the base-class for fvCellSet which additionally provides and
maintains the volume of the cell set.
Description
General cell set selection class for models that apply to sub-sets
of the mesh.
Currently supports cell selection from a set of points, a specified cellSet
or cellZone or all of the cells. The selection method can either be
specified explicitly using the \c selectionMode entry or inferred from the
presence of either a \c cellSet, \c cellZone or \c points entry. The \c
selectionMode entry is required to select \c all cells.
Usage
Examples:
\verbatim
// Apply everywhere
selectionMode all;
// Apply within a given cellSet
selectionMode cellSet; // Optional
cellSet rotor;
// Apply within a given cellZone
selectionMode cellZone; // Optional
cellSet rotor;
// Apply in cells containing a list of points
selectionMode points; // Optional
points
(
(2.25 0.5 0)
(2.75 0.5 0)
);
\endverbatim
All tutorials updated and simplified.
Description
User convenience class to handle the input of time-varying rotational speed
in rad/s if \c omega is specified or rpm if \c rpm is specified.
Usage
For specifying the rotational speed in rpm of an MRF zone:
\verbatim
MRF
{
cellZone rotor;
origin (0 0 0);
axis (0 0 1);
rpm 60;
}
\endverbatim
or the equivalent specified in rad/s:
\verbatim
MRF
{
cellZone rotor;
origin (0 0 0);
axis (0 0 1);
rpm 6.28319;
}
\endverbatim
or for a tabulated ramped rotational speed of a solid body:
\verbatim
mover
{
type motionSolver;
libs ("libfvMeshMovers.so" "libfvMotionSolvers.so");
motionSolver solidBody;
cellZone innerCylinder;
solidBodyMotionFunction rotatingMotion;
origin (0 0 0);
axis (0 1 0);
rpm table
(
(0 0)
(0.01 6000)
(0.022 6000)
(0.03 4000)
(100 4000)
);
}
\endverbatim
The following classes have been updated to use the new Function1s::omega class:
solidBodyMotionFunctions::rotatingMotion
MRFZone
rotatingPressureInletOutletVelocityFvPatchVectorField
rotatingTotalPressureFvPatchScalarField
rotatingWallVelocityFvPatchVectorField
and all tutorials using these models and BCs updated to use rpm where appropriate.
MRF (multiple reference frames) can now be used to simulate SRF (single
reference frame) cases by defining the MRF zone to include all the cells is the
mesh and applying appropriate boundary conditions. The huge advantage of this
is that MRF can easily be added to any solver by the addition of forcing terms
in the momentum equation and absolute velocity to relative flux conversions in
the formulation of the pressure equation rather than having to reformulate the
momentum and pressure system based on the relative velocity as in traditional
SRF. Also most of the OpenFOAM solver applications and all the solver modules
already support MRF.
To enable this generalisation of MRF the transformations necessary on the
velocity boundary conditions in the MRF zone can no longer be handled by the
MRFZone class itself but special adapted fvPatchFields are required. Although
this adds to the case setup it provides much greater flexibility and now complex
inlet/outlet conditions can be applied within the MRF zone, necessary for some
SRF case and which was not possible in the original MRF implementation. Now for
walls rotating within the MRF zone the new 'MRFnoSlip' velocity boundary
conditions must be applied, e.g. in the
tutorials/modules/incompressibleFluid/mixerVessel2DMRF/constant/MRFProperties
case:
boundaryField
{
rotor
{
type MRFnoSlip;
}
stator
{
type noSlip;
}
front
{
type empty;
}
back
{
type empty;
}
}
similarly for SRF cases, e.g. in the
tutorials/modules/incompressibleFluid/mixerSRF case:
boundaryField
{
inlet
{
type fixedValue;
value uniform (0 0 -10);
}
outlet
{
type pressureInletOutletVelocity;
value $internalField;
}
rotor
{
type MRFnoSlip;
}
outerWall
{
type noSlip;
}
cyclic_half0
{
type cyclic;
}
cyclic_half1
{
type cyclic;
}
}
For SRF case all the cells should be selected in the MRFproperties dictionary
which is achieved by simply setting the optional 'selectionMode' entry to all,
e.g.:
SRF
{
selectionMode all;
origin (0 0 0);
axis (0 0 1);
rpm 1000;
}
In the above the rotational speed is set in RPM rather than rad/s simply by
setting the 'rpm' entry rather than 'omega'.
The tutorials/modules/incompressibleFluid/rotor2DSRF case is more complex and
demonstrates a transient SRF simulation of a rotor requiring the free-stream
velocity to rotate around the apparently stationary rotor which is achieved
using the new 'MRFFreestreamVelocity' velocity boundary condition. The
equivalent simulation can be achieved by simply rotating the entire mesh and
keeping the free-stream flow stationary and this is demonstrated in the
tutorials/modules/incompressibleFluid/rotor2DRotating case for comparison.
The special SRFSimpleFoam and SRFPimpleFoam solvers are now redundant and have
been replaced by redirection scripts providing details of the case migration
process.
Field settings can now be specified within
createNonConformalCouplesDict. This allows for patchType overrides; for
example to create a jump condition over the coupling.
An alternate syntax has been added to facilitate this. If patch fields
do not need overriding then the old syntax can be used where patches
that are to be coupled are specified as a pair of names; e.g.:
fields yes;
nonConformalCouples
{
fan
{
patches (fan0 fan1);
transform none;
}
}
If patch fields do need overriding, then instead of the "patches" entry,
separate "owner" and "neighbour" sub-dictionaries should be used. These
can both contain a "patchFields" section detailing the boundary
conditions that apply to the newly created patches:
fields yes;
nonConformalCouples
{
fan
{
owner
{
patch fan0;
patchFields
{
p
{
type fanPressureJump;
patchType nonConformalCyclic;
jump uniform 0;
value uniform 0;
jumpTable polynomial 1((100 0));
}
}
}
neighbour
{
patch fan1;
patchFields
{
$../../owner/patchFields;
}
}
transform none;
}
}
In this example, only the pressure boundary condition is overridden on
the newly created non-conformal cyclic. All other fields will have the
basic constraint type (i.e., nonConformalCyclic) applied.
Settings for the individual non-conformal couples can now be put in a
"nonConformalCouples" sub-dictionary of the
system/createNonConformalCouplesDict. For example:
fields no;
nonConformalCouples // <-- new sub-dictionary
{
nonConformalCouple_none
{
patches (nonCouple1 nonCouple2);
transform none;
}
nonConformalCouple_30deg
{
patches (nonCoupleBehind nonCoupleAhead);
transform rotational;
rotationAxis (-1 0 0);
rotationCentre (0 0 0);
rotationAngle 30;
}
}
This permits settings to be #include-d from files that themselves
contain sub-dictionaries without the utility treating those
sub-dictionaries as if they specify a non-conformal coupling. It also
makes the syntax more comparable to that of createBafflesDict.
The new "nonConformalCouples" sub-dictionary is optional, so this change
is backwards compatible. The new syntax is recommended, however, and all
examples have been changed accordingly.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces pimpleFoam, pisoFoam and simpleFoam and all
the corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleFluid.
Class
Foam::solvers::incompressibleFluid
Description
Solver module for steady or transient turbulent flow of incompressible
isothermal fluids with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
incompressibleFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
