The vtk libraries are not fully independent of the paraview
installation, so in order to have multiple valid compilations of the
PVReaders (which is useful for testing) we need multiple versions of
these libraries, too. So, these libraries have been put into
$PV_PLUGIN_PATH, which is a paraview-version-specific subdirectory of
$FOAM_LIBBIN.
gcc version 5 and above and clang version 3.4 and above fully support the C++14
standard and the compilation rules of OpenFOAM-dev now require this support
allowing for further development and maintenance to benefit from the additional
language features provided in C++14.
foamDictionary operates on individual dictionary files irrespective of their
location or case they may be associated with and hence a case database is not
needed to read them.
using the new nonUniformTable to interpolate between the values vs temperature
provided. All properties (density, heat capacity, viscosity and thermal
conductivite) are considered functions of temperature only and the equation of
state is thus incompressible. Built-in mixing rules corresponding to those in
the other thermo and transport models are not efficient or practical for
tabulated data and so these models are currently only instantiated for the pure
specie/mixture rhoThermo package but a general external mixing method will be
added in the future.
To handle reactions the Jacobian function dKcdTbyKc has been rewritten to use
the Gstd and S functions directly removing the need for the miss-named dGdT
function and hence removing the bugs in the implementation of that function for
some of the thermo models. Additionally the Hc() function has been renamed
Hf() (heat of formation) which is more commonly used terminology and consistent
with the internals of the thermo models.
All models that require templating on the thermodynamic model, including
the thermodynamic models themselves, are now instantiated using a
centralised set of variadic macros. Seven macros exist to instantiate
models for different classes of thermodynamics model. These are:
forGases: All model combinations valid for gases
forCommonGases: The most commonly used gas models
forAbsoluteGases: A limited selection of gas models with absolute
forms of energy, for use with Xi-combustion models
forLiquids: All model combinations valid for liquids
forCommonLiquids: The most commonly used liquid models
forPolynomials: Model combinations with properties fitted to
polynomials
forSolids: All model combinations valid for solids
All the *ThermoPhysics typedefs have been removed, as this system was
fundamentally not extensible. The enormous lists of thermodynamic
instantiations that existed for reaction thermos, chemistry models,
tabulation methods, etc..., were extremely difficult to read and reason
about what combinations are valid under what circumstances. This change
centralises those decisions, makes them concise and readable, and makes
them consistent across the entire codebase.
Soot model selection has now been brought up to date in line with
chemistry, combustion, and others. The angle-bracketed part of the name
is no longer necessary; this information is determined directly from the
existing thermo model. So, now to select a mixture-fraction soot model,
the entry is simply:
sootModel mixtureFraction;
Rather than:
sootModel mixtureFraction<rhoReactionThermo,gasHThermoPhysics>;
The only place in which *ThermoPhysics typedefs are still required in
the selection name is in the thermalBaffle1D boundary condition. Here
there is no thermo model from which to determine a name. This eventually
needs resolving either by adding a selection mechanism similar to that
of the thermo packages themselves, or by removing this boundary
condition in favour of the (non-1D) thermal baffle boundary condition
and region model.
PVReaders now support compilation against ParaView version 5.7.0 and
greater. All references to ParaView versions less than 4.0.0 have been
removed.
Based on a patch contributed by CFD Support
providing the shear-stress term in the momentum equation for incompressible and
compressible Newtonian, non-Newtonian and visco-elastic laminar flow as well as
Reynolds averaged and large-eddy simulation of turbulent flow.
The general deviatoric shear-stress term provided by the MomentumTransportModels
library is named divDevTau for compressible flow and divDevSigma (sigma =
tau/rho) for incompressible flow, the spherical part of the shear-stress is
assumed to be either included in the pressure or handled separately. The
corresponding stress function sigma is also provided which in the case of
Reynolds stress closure returns the effective Reynolds stress (including the
laminar contribution) or for other Reynolds averaged or large-eddy turbulence
closures returns the modelled Reynolds stress or sub-grid stress respectively.
For visco-elastic flow the sigma function returns the effective total stress
including the visco-elastic and Newtonian contributions.
For thermal flow the heat-flux generated by thermal diffusion is now handled by
the separate ThermophysicalTransportModels library allowing independent run-time
selection of the heat-flux model.
During the development of the MomentumTransportModels library significant effort
has been put into rationalising the components and supporting libraries,
removing redundant code, updating names to provide a more logical, consistent
and extensible interface and aid further development and maintenance. All
solvers and tutorials have been updated correspondingly and backward
compatibility of the input dictionaries provided.
Henry G. Weller
CFD Direct Ltd.
Following the generalisation of the TurbulenceModels library to support
non-Newtonian laminar flow including visco-elasticity and extensible to other
form of non-Newtonian behaviour the name TurbulenceModels is misleading and does
not properly represent how general the OpenFOAM solvers now are. The
TurbulenceModels now provides an interface to momentum transport modelling in
general and the plan is to rename it MomentumTransportModels and in preparation
for this the turbulenceProperties dictionary has been renamed momentumTransport
to properly reflect its new more general purpose.
The old turbulenceProperties name is supported for backward-compatibility.
To handle the additional optional specification for the closeness calculation
these settings are now is a sub-dictionary of surfaceFeaturesDict, e.g.
closeness
{
// Output the closeness of surface elements to other surface elements.
faceCloseness no;
// Output the closeness of surface points to other surface elements.
pointCloseness yes;
// Optional maximum angle between opposite points considered close
internalAngleTolerance 80;
externalAngleTolerance 80;
}
The utilised static parts of polyMeshGeometry are now part of a
polyMeshCheck namespace. Everything else has been removed, as they were
unused, out of date, and/or duplicated elsewhere.
For many information and diagnostic messages the absolute path of the object is
not required and the local path relative to the current case is sufficient; the
new localObjectPath() member function of IOobject provides a convenient way of
printing this.
The calculation and input/output of transformations has been rewritten
for all coupled patches. This replaces multiple duplicated, inconsistent
and incomplete implementations of transformation handling which were
spread across the different coupled patch types.
Transformations are now calculated or specified once, typically during
mesh construction or manipulation, and are written out with the boundary
data. They are never re-calculated. Mesh changes should not change the
transformation across a coupled interface; to do so would violate the
transformation.
Transformations are now calculated using integral properties of the
patches. This is more numerically stable that the previous methods which
functioned in terms of individual faces. The new routines are also able
to automatically calculate non-zero centres of rotation.
The user input of transformations is backwards compatible, and permits
the user to manually specify varying amounts of the transformation
geometry. Anything left unspecified gets automatically computed from the
patch geometry. Supported specifications are:
1) No specification. Transformations on cyclics are automatically
generated, and cyclicAMI-type patches assume no transformation. For
example (in system/blockMeshDict):
cyclicLeft
{
type cyclic;
neighbourPatch cyclicRight;
faces ((0 1 2 3));
}
cyclicRight
{
type cyclic;
neighbourPatch cyclicLeft;
faces ((4 5 6 7));
}
2) Partial specification. The type of transformation is specified
by the user, as well as the coordinate system if the transform is
rotational. The rotation angle or separation vector is still
automatically generated. This form is useful as the signs of the
angle and separation are opposite on different sides of an interface
and can be difficult to specify correctly. For example:
cyclicLeft
{
type cyclic;
neighbourPatch cyclicRight;
transformType translational;
faces ((0 1 2 3));
}
cyclicRight
{
type cyclic;
neighbourPatch cyclicLeft;
transformType translational;
faces ((4 5 6 7));
}
cyclicAMILeft
{
type cyclicAMI;
neighbourPatch cyclicAMIRight;
transformType rotational;
rotationAxis (0 0 1);
rotationCentre (0.05 -0.01 0);
faces ((8 9 10 11));
}
cyclicAMIRight
{
type cyclicAMI;
neighbourPatch cyclicAMILeft;
transformType rotational;
rotationAxis (0 0 1);
rotationCentre (0.05 -0.01 0);
faces ((12 13 14 15));
}
3) Full specification. All parameters of the transformation are
given. For example:
cyclicLeft
{
type cyclic;
neighbourPatch cyclicRight;
transformType translational;
separaion (-0.01 0 0);
faces ((0 1 2 3));
}
cyclicRight
{
type cyclic;
neighbourPatch cyclicLeft;
transformType translational;
separaion (0.01 0 0);
faces ((4 5 6 7));
}
cyclicAMILeft
{
type cyclicAMI;
neighbourPatch cyclicAMIRight;
transformType rotational;
rotationAxis (0 0 1);
rotationCentre (0.05 -0.01 0);
rotationAngle 60;
faces ((8 9 10 11));
}
cyclicAMIRight
{
type cyclicAMI;
neighbourPatch cyclicAMILeft;
transformType rotational;
rotationAxis (0 0 1);
rotationCentre (0.05 -0.01 0);
rotationAngle 60;
faces ((12 13 14 15));
}
Automatic ordering of faces and points across coupled patches has also
been rewritten, again replacing multiple unsatisfactory implementations.
The new ordering method is more robust on poor meshes as it
geometrically matches only a single face (per contiguous region of the
patch) in order to perform the ordering, and this face is chosen to be
the one with the highest quality. A failure in ordering now only occurs
if the best face in the patch cannot be geometrically matched, whether
as previously the worst face could cause the algorithm to fail.
The oldCyclicPolyPatch has been removed, and the mesh converters which
previously used it now all generate ordered cyclic and baffle patches
directly. This removes the need to run foamUpgradeCyclics after
conversion. In addition the fluent3DMeshToFoam converter now supports
conversion of periodic/shadow pairs to OpenFOAM cyclic patches.
For complex geometries the calculation of surface face and point "closeness" can
be quite time consuming and usually only one or other is required; the new
options allow the user to specify which should be calculated and written.
A single transformer object is now maintained within cyclic patches and returned
from a single virtual functions massively simplifying the interface and allowing
for further rationalisation of the calculation of the transformation.
The implementation of the optional non-uniform transformations in coupled
patches was based on transform property lists which could be either length 0 for
no transformation, 1 for uniform transformation or n-faces for non-uniform
transformation. This complexity was maintenance nightmare but kept to support
the hack in the original film implementation to partially work around the
conservation error. Now that film has been re-implemented in fully mass
conservative form this unphysical non-uniform transformation support is no
longer needed and the coupled patch transformations have been completely
refactored to be simpler and more rational with single values for the
transformation properties and boolians to indicate which transformations are
needed.
All of the film transport equations are now formulated with respect to the film
volume fraction in the region cell layer rather than the film thickness which
ensures mass conservation of the film even as it flows over curved surfaces and
around corners. (In the previous formulation the conservation error could be as
large as 15% for a film flowing around a corner.)
The film Courant number is now formulated in terms of the film cell volumetric
flux which avoids the stabilised division by the film thickness and provides a
more reliable estimate for time-step evaluation. As a consequence the film
solution is substantially more robust even though the time-step is now
significantly higher. For film flow dominated problem the simulations now runs
10-30x faster.
The inconsistent extended PISO controls have been replaced by the standard
PIMPLE control system used in all other flow solvers, providing consistent
input, a flexible structure and easier maintenance.
The momentum corrector has been re-formulated to be consistent with the momentum
predictor so the optional PIMPLE outer-corrector loop converges which it did not
previously.
nonuniformTransformCyclic patches and corresponding fields are no longer needed
and have been removed which paves the way for a future rationalisation of the
handling of cyclic transformations in OpenFOAM to improve robustness, usability
and maintainability.
Film sources have been simplified to avoid the need for fictitious boundary
conditions, in particular mappedFixedPushedInternalValueFvPatchField which has
been removed.
Film variables previously appended with an "f" for "film" rather than "face"
have been renamed without the unnecessary and confusing "f" as they are
localised to the film region and hence already directly associated with it.
All film tutorials have been updated to test and demonstrate the developments
and improvements listed above.
Henry G. Weller
CFD Direct Ltd.
