gcc-13 has new code checking and warning mechanisms which are useful but not
entirely robust and produce many false positives, particularly with respect to
local references:
warning: possibly dangling reference to a temporary
This commit resolves many of the new warning messages but the above false
warnings remain. It is possible to switch off this warning but as it also
provides some useful checks it is currently left on.
foamToC: New run-time selection table of contents printing and interrogation utility
The new solver modules cannot provide the equivalent functionality of the -list
options available in the solver applications so foamToC has been developed as a
better, more general and flexible alternative, providing a means to print any or
all run-time selection tables in any or all libraries and search the tables for
any particular entries and print which library files the corresponding tables
are in, e.g.
foamToC -solver fluid -table fvPatchScalarField
Contents of table fvPatchScalarField, base type fvPatchField:
advective libfiniteVolume.so
calculated libfiniteVolume.so
codedFixedValue libfiniteVolume.so
codedMixed libfiniteVolume.so
compressible::alphatJayatillekeWallFunctionlibthermophysicalTransportModels.so
compressible::alphatWallFunction libthermophysicalTransportModels.so
compressible::thermalBaffle1D<eConstSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::thermalBaffle1D<ePowerSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::turbulentTemperatureCoupledBaffleMixedlibthermophysicalTransportModels.so
compressible::turbulentTemperatureRadCoupledMixedlibthermophysicalTransportModels.so
.
.
.
foamToC -solver fluid -search compressible::alphatWallFunction
compressible::alphatWallFunction is in tables
fvPatchField
fvPatchScalarField libthermophysicalTransportModels.so
and the very useful -allLibs option allows ALL libraries to be searched to find
in which table and which library file a particular model in in for example:
foamToC -allLibs -search phaseTurbulenceStabilisation
Loading libraries:
libtwoPhaseSurfaceTension.so
libcv2DMesh.so
libODE.so
.
.
.
phaseTurbulenceStabilisation is in tables
fvModel libmultiphaseEulerFoamFvModels.so
Application
foamToC
Description
Run-time selection table of contents printing and interrogation.
The run-time selection tables are populated by the optionally specified
solver class and any additional libraries listed in the \c -libs option or
all libraries using the \c -allLibs option. Once populated the tables can
be searched and printed by a range of options listed below. Table entries
are printed with the corresponding library they are in to aid selection
and the addition of \c libs entries to ensure availability to the solver.
Usage
\b foamToC [OPTION]
- \par -solver \<name\>
Specify the solver class
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries to load
- \par -allLibs
Load all libraries
- \par switches,
List all available debug, info and optimisation switches
- \par all,
List the contents of all the run-time selection tables
- \par tables
List the run-time selection table names (this is the default action)
- \par table \<name\>
List the contents of the specified table or the list sub-tables
- \par search \<name\>
Search for and list the tables containing the given entry
- \par scalarBCs,
List scalar field boundary conditions (fvPatchField<scalar>)
- \par vectorBCs,
List vector field boundary conditions (fvPatchField<vector>)
- \par functionObjects,
List functionObjects
- \par fvModels,
List fvModels
- \par fvConstraints,
List fvConstraints
Example usage:
- Print the list of scalar boundary conditions (fvPatchField<scalar>)
provided by the \c fluid solver without additional libraries:
\verbatim
foamToC -solver fluid -scalarBCs
\endverbatim
- Print the list of RAS momentum transport models provided by the
\c fluid solver:
\verbatim
foamToC -solver fluid -table RAScompressibleMomentumTransportModel
\endverbatim
- Print the list of functionObjects provided by the
\c multicomponentFluid solver with the libfieldFunctionObjects.so
library:
\verbatim
foamToC -solver multicomponentFluid \
-libs '("libfieldFunctionObjects.so")' -functionObjects
\endverbatim
- Print a complete list of all run-time selection tables:
\verbatim
foamToC -allLibs -tables
or
foamToC -allLibs
\endverbatim
- Print a complete list of all entries in all run-time selection tables:
\verbatim
foamToC -allLibs -all
\endverbatim
The method to update phi in PDRFoamAutoRefine has been superseded by rhoUf in
all other compressible solvers and PDRFoam needs to be updated, requiring
funding. PDRFoamAutoRefine is no longer maintained.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces XiFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/XiFluid.
Class
Foam::solvers::XiFluid
Description
Solver module for compressible premixed/partially-premixed combustion with
turbulence modelling.
Combusting RANS code using the b-Xi two-equation model.
Xi may be obtained by either the solution of the Xi transport
equation or from an algebraic expression. Both approaches are
based on Gulder's flame speed correlation which has been shown
to be appropriate by comparison with the results from the
spectral model.
Strain effects are encorporated directly into the Xi equation
but not in the algebraic approximation. Further work need to be
done on this issue, particularly regarding the enhanced removal rate
caused by flame compression. Analysis using results of the spectral
model will be required.
For cases involving very lean Propane flames or other flames which are
very strain-sensitive, a transport equation for the laminar flame
speed is present. This equation is derived using heuristic arguments
involving the strain time scale and the strain-rate at extinction.
the transport velocity is the same as that for the Xi equation.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, chemical reactions,
combustion, Lagrangian particles, radiation, surface film etc. and
constraining or limiting the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
XiFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
Some momentumTransportModels like the laminar Stokes and generalisedNewtonian
models do no solve transport equations and the transport coefficients they
provide can be predicted at the beginning of the time-step rather than corrected
at the end, after conservative fluxes are available. A particular advantage of
this approach is that complex data cached in the momentumTransportModels
can now be deleted following mesh topology changes and recreated in the
predict() call which is more efficient than attempting to register and map the
data.
Currently the predict() function is only used for the Stokes and
generalisedNewtonian models but it will be extended in the future to cover many
LES models which also do not require the solution of transport equations.
All solvers and solver modules have been update to call the
momentumTransportModel::predict() function at the beginning of the time-step,
controlled by the new PIMPLE transportPredictionFirst control as appropriate.
None of the current thermophysicalTransportModels solve transport equations in
order to evaluate the thermophysical transport properties so it makes more sense
that the evaluation occurs at the beginning of the time-step rather than at the
end where conservative fluxes are available for transport solution. To enable
this the correct() functions have been renamed predict() and called in the
prePredictor() step of foamRun and foamMultiRun and at the beginning of the
time-step in the legacy solvers. A particular advantage of this approach is
that complex data cached in the thermophysicalTransportModels can now be deleted
following mesh topology changes and recreated in the predict() call which is
more efficient than attempting to register and map the data.
An empty correct() function is included in addition to the new predict()
function in thermophysicalTransportModel to support scalar flux transport
closure in the future if needed.
Additionally the two transport model corrector function calls in foamRun and
foamMultiRun have been combined into a single postCorrector() call to allow
greater flexibility in transport property prediction and correction in the
modular solvers.
The timeName() function simply returns the dimensionedScalar::name() which holds
the user-time name of the current time and now that timeName() is no longer
virtual the dimensionedScalar::name() can be called directly. The timeName()
function implementation is maintained for backward-compatibility.
alphaEff is now an internal field used only for the implicit energy correction
term, kappaEff, q and divq are the general and rational interface to thermal
transport.
XiFoam and PDRFoam now explicitly instantiate a unityLewisEddyDiffusivity
fluidThermophysicalTransportModel as the the unity Lewis number approximation is
hard-coded into the formulation of the energy/composition system.
The thermodynamic density field is now named "rho" by default and only renamed
"thermo:rho" by solvers that create and maintain a separate continuity density
field which is named "rho". This change significantly simplifies and
standardises the specification of schemes and boundary conditions requiring
density as it is now always named "rho" or "rho.<phase>" unless under some very
unusual circumstances the thermodynamic rather than continuity density is
required for a solver maintaining both.
The advantage of this change is particularly noticeable for multiphase
simulations in which each phase has its own density now named "rho.<phase>"
rather than "thermo:rho.<phase>" as separate phase continuity density fields are
not required so for multiphaseEulerFoam the scheme specification:
"div\(alphaRhoPhi.*,\(p\|thermo:rho.*\)\)" Gauss limitedLinear 1;
is now written:
"div\(alphaRhoPhi.*,\(p\|rho.*\)\)" Gauss limitedLinear 1;
The previous fluidThermophysicalTransportModel typedef has been renamed
fluidThermoThermophysicalTransportModel as it is instantiated on fluidThermo,
freeing the name fluidThermophysicalTransportModel for the new base-class.
to handle isotropic and anisotropic is a consistent, general and extensible
manner, replacing the horrible hacks which were in solidThermo.
This is entirely consistent with thermophysicalTransportModel for fluids and
provides the q() and divq() for the solid energy conservation equations. The
transport model and properties are specified in the optional
thermophysicalTransport dictionary, the default model being isotropic if this
dictionary file is not present, thus providing complete backward-compatibility
for the common isotropic cases.
Anisotropic thermal conductivity is now handled in a much more general manner by
the anisotropic model:
Class
Foam::solidThermophysicalTransportModels::anisotropic
Description
Solid thermophysical transport model for anisotropic thermal conductivity
The anisotropic thermal conductivity field is evaluated from the solid
material anisotropic kappa specified in the physicalProperties dictionary
transformed into the global coordinate system using default
coordinate system and optionally additional coordinate systems specified
per-zone in the thermophysicalProperties dictionary.
Usage
Example of the anisotropic thermal conductivity specification in
thermophysicalProperties with two zone-based coordinate systems in
addition to the default:
\verbatim
model anisotropic;
// Default coordinate system
coordinateSystem
{
type cartesian;
origin (0 0 0);
coordinateRotation
{
type cylindrical;
e3 (1 0 0);
}
}
// Optional zone coordinate systems
zones
{
coil1
{
type cartesian;
origin (0.1 0.2 0.7);
coordinateRotation
{
type cylindrical;
e3 (0.5 0.866 0);
}
}
coil2
{
type cartesian;
origin (0.4 0.5 1);
coordinateRotation
{
type cylindrical;
e3 (0.866 0.5 0);
}
}
}
\endverbatim
This development required substantial rationalisation of solidThermo,
coordinateSystems and updates to the solid solver module, solidDisplacementFoam,
the wallHeatFlux functionObject, thermalBaffle and all coupled thermal boundary
conditions.
MRF (multiple reference frames) can now be used to simulate SRF (single
reference frame) cases by defining the MRF zone to include all the cells is the
mesh and applying appropriate boundary conditions. The huge advantage of this
is that MRF can easily be added to any solver by the addition of forcing terms
in the momentum equation and absolute velocity to relative flux conversions in
the formulation of the pressure equation rather than having to reformulate the
momentum and pressure system based on the relative velocity as in traditional
SRF. Also most of the OpenFOAM solver applications and all the solver modules
already support MRF.
To enable this generalisation of MRF the transformations necessary on the
velocity boundary conditions in the MRF zone can no longer be handled by the
MRFZone class itself but special adapted fvPatchFields are required. Although
this adds to the case setup it provides much greater flexibility and now complex
inlet/outlet conditions can be applied within the MRF zone, necessary for some
SRF case and which was not possible in the original MRF implementation. Now for
walls rotating within the MRF zone the new 'MRFnoSlip' velocity boundary
conditions must be applied, e.g. in the
tutorials/modules/incompressibleFluid/mixerVessel2DMRF/constant/MRFProperties
case:
boundaryField
{
rotor
{
type MRFnoSlip;
}
stator
{
type noSlip;
}
front
{
type empty;
}
back
{
type empty;
}
}
similarly for SRF cases, e.g. in the
tutorials/modules/incompressibleFluid/mixerSRF case:
boundaryField
{
inlet
{
type fixedValue;
value uniform (0 0 -10);
}
outlet
{
type pressureInletOutletVelocity;
value $internalField;
}
rotor
{
type MRFnoSlip;
}
outerWall
{
type noSlip;
}
cyclic_half0
{
type cyclic;
}
cyclic_half1
{
type cyclic;
}
}
For SRF case all the cells should be selected in the MRFproperties dictionary
which is achieved by simply setting the optional 'selectionMode' entry to all,
e.g.:
SRF
{
selectionMode all;
origin (0 0 0);
axis (0 0 1);
rpm 1000;
}
In the above the rotational speed is set in RPM rather than rad/s simply by
setting the 'rpm' entry rather than 'omega'.
The tutorials/modules/incompressibleFluid/rotor2DSRF case is more complex and
demonstrates a transient SRF simulation of a rotor requiring the free-stream
velocity to rotate around the apparently stationary rotor which is achieved
using the new 'MRFFreestreamVelocity' velocity boundary condition. The
equivalent simulation can be achieved by simply rotating the entire mesh and
keeping the free-stream flow stationary and this is demonstrated in the
tutorials/modules/incompressibleFluid/rotor2DRotating case for comparison.
The special SRFSimpleFoam and SRFPimpleFoam solvers are now redundant and have
been replaced by redirection scripts providing details of the case migration
process.
in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
Full backward-compatibility is provided which support for both multiComponentMixture and
multiComponentPhaseModel provided but all tutorials have been updated.
Now that the reaction system, chemistry and combustion models are completely
separate from the multicomponent mixture thermophysical properties package that
supports them it is inconsistent that thermo is named reactionThermo and the
name multicomponentThermo better describes the purpose and functionality.
Now stationary MRF regions may be embedded in moving mesh cases. While in
principle MRF regions moving with the mesh is supported by this development
there is no special handling with the MRF implementation to support the required
specification of the motion of the MRF regions.
fvMesh::update() now executes at the beginning of the time-step, before time is
incremented and handles topology change, mesh to mesh mapping and redistribution
without point motion. Following each of these mesh changes fields are mapped
from the previous mesh state to new mesh state in a conservative manner. These
mesh changes not occur at most once per time-step.
fvMesh::move() is executed after time is incremented and handles point motion
mesh morphing during the time-step in an Arbitrary Lagrangian Eulerian approach
requiring the mesh motion flux to match the cell volume change. fvMesh::move()
can be called any number of times during the time-step to allow iterative update
of the coupling between the mesh motion and field solution.
fvMesh is no longer derived from fvSchemes and fvSolution, these are now
demand-driven and accessed by the member functions schemes() and solution()
respectively. This means that the system/fvSchemes and system/fvSolution files
are no longer required during fvMesh constructions simplifying the mesh
generation and manipulation phase; theses files are read on the first call of
their access functions.
The fvSchemes member function names have also been simplified taking advantage
of the context in which they are called, for example
mesh.ddtScheme(fieldName) -> mesh.schemes().ddt(fieldName)
Solver for steady or transient buoyant, turbulent flow of compressible fluids
for ventilation and heat-transfer, with optional mesh motion and mesh topology
changes. Created by merging buoyantSimpleFoam and buoyantPimpleFoam to provide
a more general solver and simplify maintenance.
For some cases, in particular those with very small cells created by snapping in
corners for example, it may be beneficial to convergence rate to limit the
minimum LTS time-step, the new minDeltaT control provides this.
With the general run-time selectable fvMeshMovers engine compression simulations
can be performed with reactingFoam so there is no longer any need for engine
specific solvers or engineMesh.
An engineFoam script is provided to redirect users to reactingFoam with
instructions.
PDRFoam is a Xi combustion model solver including porosity distributed
resistance and shares code with XiFoam so it is more logical that it should be
in a sub-directory of XiFoam to simplify compilation dependency.
With the general run-time selectable fvMeshMovers engine compression simulations
can be performed with rhoPimpleFoam so there is no longer any need for engine
specific solvers.
A coldEngineFoam script is provided to redirect users to rhoPimpleFoam with
instructions.
With the addition of mesh-motion to XiFoam and the new engine fvMeshMover the
XiEngineFoam kivaTest simple IC engine example now runs in XiFoam and
XiEngineFoam has been removed. This simplifies maintenance provides greater
extensibility.
with the run-time selectable engine userTime embedded in Time.
All parts of the original engineTime relating to the engine geometry have been
moved to engineMesh. This is part of the process of integrating engine
simulations within the standard moving-mesh solvers.
replacing the virtual functions overridden in engineTime.
Now the userTime conversion function in Time is specified in system/controlDict
such that the solver as well as all pre- and post-processing tools also operate
correctly with the chosen user-time.
For example the user-time and rpm in the tutorials/combustion/XiEngineFoam/kivaTest case are
now specified in system/controlDict:
userTime
{
type engine;
rpm 1500;
}
The default specification is real-time:
userTime
{
type real;
}
but this entry can be omitted as the real-time class is instantiated
automatically if the userTime entry is not present in system/controlDict.
Mesh motion and topology change are now combinable run-time selectable options
within fvMesh, replacing the restrictive dynamicFvMesh which supported only
motion OR topology change.
All solvers which instantiated a dynamicFvMesh now instantiate an fvMesh which
reads the optional constant/dynamicFvMeshDict to construct an fvMeshMover and/or
an fvMeshTopoChanger. These two are specified within the optional mover and
topoChanger sub-dictionaries of dynamicFvMeshDict.
When the fvMesh is updated the fvMeshTopoChanger is first executed which can
change the mesh topology in anyway, adding or removing points as required, for
example for automatic mesh refinement/unrefinement, and all registered fields
are mapped onto the updated mesh. The fvMeshMover is then executed which moved
the points only and calculates the cell volume change and corresponding
mesh-fluxes for conservative moving mesh transport. If multiple topological
changes or movements are required these would be combined into special
fvMeshMovers and fvMeshTopoChangers which handle the processing of a list of
changes, e.g. solidBodyMotionFunctions:multiMotion.
The tutorials/multiphase/interFoam/laminar/sloshingTank3D3DoF case has been
updated to demonstrate this new functionality by combining solid-body motion
with mesh refinement/unrefinement:
/*--------------------------------*- C++ -*----------------------------------*\
========= |
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
\\ / O peration | Website: https://openfoam.org
\\ / A nd | Version: dev
\\/ M anipulation |
\*---------------------------------------------------------------------------*/
FoamFile
{
format ascii;
class dictionary;
location "constant";
object dynamicMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
mover
{
type motionSolver;
libs ("libfvMeshMovers.so" "libfvMotionSolvers.so");
motionSolver solidBody;
solidBodyMotionFunction SDA;
CofG (0 0 0);
lamda 50;
rollAmax 0.2;
rollAmin 0.1;
heaveA 4;
swayA 2.4;
Q 2;
Tp 14;
Tpn 12;
dTi 0.06;
dTp -0.001;
}
topoChanger
{
type refiner;
libs ("libfvMeshTopoChangers.so");
// How often to refine
refineInterval 1;
// Field to be refinement on
field alpha.water;
// Refine field in between lower..upper
lowerRefineLevel 0.001;
upperRefineLevel 0.999;
// Have slower than 2:1 refinement
nBufferLayers 1;
// Refine cells only up to maxRefinement levels
maxRefinement 1;
// Stop refinement if maxCells reached
maxCells 200000;
// Flux field and corresponding velocity field. Fluxes on changed
// faces get recalculated by interpolating the velocity. Use 'none'
// on surfaceScalarFields that do not need to be reinterpolated.
correctFluxes
(
(phi none)
(nHatf none)
(rhoPhi none)
(alphaPhi.water none)
(meshPhi none)
(meshPhi_0 none)
(ghf none)
);
// Write the refinement level as a volScalarField
dumpLevel true;
}
// ************************************************************************* //
Note that currently this is the only working combination of mesh-motion with
topology change within the new framework and further development is required to
update the set of topology changers so that topology changes with mapping are
separated from the mesh-motion so that they can be combined with any of the
other movements or topology changes in any manner.
All of the solvers and tutorials have been updated to use the new form of
dynamicMeshDict but backward-compatibility was not practical due to the complete
reorganisation of the mesh change structure.
to provide a single consistent code and user interface to the specification of
physical properties in both single-phase and multi-phase solvers. This redesign
simplifies usage and reduces code duplication in run-time selectable solver
options such as 'functionObjects' and 'fvModels'.
* physicalProperties
Single abstract base-class for all fluid and solid physical property classes.
Physical properties for a single fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties' dictionary.
Physical properties for a phase fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties.<phase>' dictionary.
This replaces the previous inconsistent naming convention of
'transportProperties' for incompressible solvers and
'thermophysicalProperties' for compressible solvers.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the
'physicalProperties' dictionary does not exist.
* phaseProperties
All multi-phase solvers (VoF and Euler-Euler) now read the list of phases and
interfacial models and coefficients from the
'constant/<region>/phaseProperties' dictionary.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the 'phaseProperties'
dictionary does not exist. For incompressible VoF solvers the
'transportProperties' is automatically upgraded to 'phaseProperties' and the
two 'physicalProperties.<phase>' dictionary for the phase properties.
* viscosity
Abstract base-class (interface) for all fluids.
Having a single interface for the viscosity of all types of fluids facilitated
a substantial simplification of the 'momentumTransport' library, avoiding the
need for a layer of templating and providing total consistency between
incompressible/compressible and single-phase/multi-phase laminar, RAS and LES
momentum transport models. This allows the generalised Newtonian viscosity
models to be used in the same form within laminar as well as RAS and LES
momentum transport closures in any solver. Strain-rate dependent viscosity
modelling is particularly useful with low-Reynolds number turbulence closures
for non-Newtonian fluids where the effect of bulk shear near the walls on the
viscosity is a dominant effect. Within this framework it would also be
possible to implement generalised Newtonian models dependent on turbulent as
well as mean strain-rate if suitable model formulations are available.
* visosityModel
Run-time selectable Newtonian viscosity model for incompressible fluids
providing the 'viscosity' interface for 'momentumTransport' models.
Currently a 'constant' Newtonian viscosity model is provided but the structure
supports more complex functions of time, space and fields registered to the
region database.
Strain-rate dependent non-Newtonian viscosity models have been removed from
this level and handled in a more general way within the 'momentumTransport'
library, see section 'viscosity' above.
The 'constant' viscosity model is selected in the 'physicalProperties'
dictionary by
viscosityModel constant;
which is equivalent to the previous entry in the 'transportProperties'
dictionary
transportModel Newtonian;
but backward-compatibility is provided for both the keyword and model
type.
* thermophysicalModels
To avoid propagating the unnecessary constructors from 'dictionary' into the
new 'physicalProperties' abstract base-class this entire structure has been
removed from the 'thermophysicalModels' library. The only use for this
constructor was in 'thermalBaffle' which now reads the 'physicalProperties'
dictionary from the baffle region directory which is far simpler and more
consistent and significantly reduces the amount of constructor code in the
'thermophysicalModels' library.
* compressibleInterFoam
The creation of the 'viscosity' interface for the 'momentumTransport' models
allows the complex 'twoPhaseMixtureThermo' derived from 'rhoThermo' to be
replaced with the much simpler 'compressibleTwoPhaseMixture' derived from the
'viscosity' interface, avoiding the myriad of unused thermodynamic functions
required by 'rhoThermo' to be defined for the mixture.
Same for 'compressibleMultiphaseMixture' in 'compressibleMultiphaseInterFoam'.
This is a significant improvement in code and input consistency, simplifying
maintenance and further development as well as enhancing usability.
Henry G. Weller
CFD Direct Ltd.
The pressure work term for total internal energy is div(U p) which can be
discretised is various ways, given a mass flux field phi it seems logical to
implement it in the form div(phi/interpolate(rho), p) but this is not exactly
consistent with the relationship between enthalpy and internal energy (h = e +
p/rho) and the transport of enthalpy, it would be more consistent to implement
it in the form div(phi, p/rho). A further improvement in consistency can be
gained by using the same convection scheme for this work term and the convection
term div(phi, e) and for reacting solvers this is easily achieved by using the
multi-variate limiter mvConvection provided for energy and specie convection.
This more consistent total internal energy work term has now been implemented in
all the compressible and reacting flow solvers and provides more accurate
solutions when running with internal energy, particularly for variable density
mixing cases with small pressure variation.
For non-reacting compressible solvers this improvement requires a change to the
corresponding divScheme in fvSchemes:
div(phiv,p) -> div(phi,(p|rho))
and all the tutorials have been updated accordingly.
for buoyant solvers buoyantPimpleFoam, buoyantSimpleFoam and
buoyantReactingFoam:
Class
Foam::hydrostaticInitialisation
Description
Optional hydrostatic initialisation of p_rgh and p by solving for and
caching the hydrostatic ph_rgh and updating the density such that
p = ph_rgh + rho*gh + pRef
This initialisation process is applied at the beginning of the run (not on
restart) if the \c hydrostaticInitialisation switch is set true in
fvSolution/PIMPLE or fvSolution/SIMPLE. The calculation is iterative if the
density is a function of pressure and an optional number of iterations \c
nHydrostaticCorrectors may be specified which defaults to 5.
The fireFoam solver has solver has been replaced by the more general
buoyantReactingFoam solver, which supports buoyant compressible reacting flow
coupled to multiple run-time-selectable lagrangian clouds and surface film
modelling and optional hydrostatic initialisation of the pressure and p_rgh.
Hydrostatic initialisation of the pressure fields is useful for large fires in
open domains where the stability of the initial flow is dominated by the initial
pressure distribution in the domain and at the boundaries. The optional
hydrostaticInitialization switch in fvSolution/PIMPLE with
nHydrostaticCorrectors enables hydrostatic initialisation, e.g.
PIMPLE
{
momentumPredictor yes;
nOuterCorrectors 1;
nCorrectors 2;
nNonOrthogonalCorrectors 0;
hydrostaticInitialization yes;
nHydrostaticCorrectors 5;
}
and the resulting ph_rgh field can be used with the prghTotalHydrostaticPressure
p_rgh boundary condition to apply this hydrostatic pressure distribution at the
boundaries throughout the simulation.
See the following cases for examples transferred from fireFoam:
$FOAM_TUTORIALS/combustion/buoyantReactingFoam/RAS
With the new fvModels framework it is now possible to implement complex models
and wrappers around existing complex models which can then be optionally
selected in any general solver which provides compatible fields and
thermophysical properties. This simplifies code development and maintenance by
significantly reducing complex code duplication and also provide the opportunity
of running these models in other solvers without the need for code duplication
and alteration.
The immediate advantage of this development is the replacement of the
specialised Lagrangian solvers with their general counterparts:
reactingParticleFoam -> reactingFoam
reactingParcelFoam -> reactingFoam
sprayFoam -> reactingFoam
simpleReactingParticleFoam -> reactingFoam
buoyantReactingParticleFoam -> buoyantReactingFoam
For example to run a reactingParticleFoam case in reactingFoam add the following
entries in constant/fvModels:
buoyancyForce
{
type buoyancyForce;
}
clouds
{
type clouds;
libs ("liblagrangianParcel.so");
}
which add the acceleration due to gravity needed by Lagrangian clouds and the
clouds themselves.
See the following cases for examples converted from reactingParticleFoam:
$FOAM_TUTORIALS/combustion/reactingFoam/Lagrangian
and to run a buoyantReactingParticleFoam case in buoyantReactingFoam add the
following entry constant/fvModels:
clouds
{
type clouds;
libs ("liblagrangianParcel.so");
}
to add support for Lagrangian clouds and/or
surfaceFilm
{
type surfaceFilm;
libs ("libsurfaceFilmModels.so");
}
to add support for surface film. The buoyancyForce fvModel is not required in
this case as the buoyantReactingFoam solver has built-in support for buoyancy
utilising the p_rgh formulation to provide better numerical handling for this
force for strongly buoyancy-driven flows.
See the following cases for examples converted from buoyantReactingParticleFoam:
$FOAM_TUTORIALS/combustion/buoyantReactingFoam/Lagrangian
All the tutorial cases for the redundant solvers have been updated and converted
into their new equivalents and redirection scripts replace these solvers to
provide users with prompts on which solvers have been replaced by which and
information on how to upgrade their cases.
To support this change and allow all previous Lagrangian tutorials to run as
before the special Lagrangian solver fvSolution/PIMPLE control
solvePrimaryRegion has been replaced by the more general and useful controls:
models : Enable the fvModels
thermophysics : Enable thermophysics (energy and optional composition)
flow : Enable flow (pressure/velocity system)
which also replace the fvSolution/PIMPLE control frozenFlow present in some
solvers. These three controls can be used in various combinations to allow for
example only the fvModels to be evaluated, e.g. in
$FOAM_TUTORIALS/combustion/buoyantReactingFoam/Lagrangian/rivuletPanel
PIMPLE
{
models yes;
thermophysics no;
flow no;
.
.
.
so that only the film is solved. Or during the start-up of a case it might be
beneficial to run the pressure-velocity system for a while without updating
temperature which can be achieved by switching-off thermophysics. Also the
behaviour of the previous frozenFlow switch can be reproduced by switching flow
off with the other two switches on, allowing for example reactions, temperature
and composition update without flow.
The reduced SLGThermo has been renamed parcelThermo to better represent the
purpose.
parcelThermo is not created and stored in the cloud that requires it rather than
requiring it to be created in the solver createFields and passed to the cloud on
construction.
To provide more flexibility, extensibility, run-time modifiability and
consistency the handling of optional pressure limits has been moved from
pressureControl (settings in system/fvSolution) to the new limitPressure
fvConstraint (settings in system/fvConstraints).
All tutorials have been updated which provides guidance when upgrading cases but
also helpful error messages are generated for cases using the old settings
providing specific details as to how the case should be updated, e.g. for the
tutorials/compressible/rhoSimpleFoam/squareBend case which has the pressure
limit specification:
SIMPLE
{
...
pMinFactor 0.1;
pMaxFactor 2;
...
generates the error message
--> FOAM FATAL IO ERROR:
Pressure limits should now be specified in fvConstraints:
limitp
{
type limitPressure;
minFactor 0.1;
maxFactor 2;
}
file: /home/dm2/henry/OpenFOAM/OpenFOAM-dev/tutorials/compressible/rhoSimpleFoam/squareBend/system/fvSolution/SIMPLE from line 41 to line 54.
