executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces driftFluxFoam and all the corresponding
tutorials have been updated and moved to
tutorials/modules/incompressibleDriftFlux.
Class
Foam::solvers::incompressibleDriftFlux
Description
Solver module for 2 incompressible fluids using the mixture approach with
the drift-flux approximation for relative motion of the phases, with
optional mesh motion and mesh topology changes including adaptive
re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved with mixture transport modelling in which a
single laminar, RAS or LES model is selected to model the momentum stress.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
incompressibleDriftFlux.C
See also
Foam::solvers::VoFSolver
Foam::solvers::twoPhaseVoFSolver
Foam::solvers::compressibleVoF
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces denseParticleFoam and all the corresponding
tutorials have been updated and moved to
tutorials/modules/incompressibleDenseParticleFluid.
Class
Foam::solvers::incompressibleDenseParticleFluid
Description
Solver module for transient flow of incompressible isothermal fluids coupled
with particle clouds including the effect of the volume fraction of
particles on the continuous phase, with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Class
Foam::solvers::isothermalFilm
Description
Solver module for flow of compressible isothermal liquid films
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
The implementation of this new film solver is in fully conservative form,
solving for the film volume-fraction rather film thickness which ensures
conservation on curved and irregular surfaces and even around corners.
Also the formulation is consistent with standard FV solvers in other fundamental
respects using boundary conditions rather than volume forces to apply surface
stresses and transfers. This hugely advantageous approach, which allows the
reuse of many of the standard OpenFOAM libraries, in particular standard
compressibleMomentumTransportModels for the wall and internal film stresses, is
achieved using the special patch types filmWall and filmSurface to handle the
difference between the film thickness and the film cell layer height.
The specification of physical properties, boundary conditions, optional models
etc. etc. is handled in the same manner as all the other solver modules, making
much easier to use and to maintain the code.
Currently only coupling to the wall is supported with laminar transport, surface
tension, a new and more accurate contact angle algorithm and gravity which is
sufficient to demonstrate rivulet flow for example as in the tutorial case
provided: tutorials/modules/isothermalFilm/rivuletPanel
Support for coupling to an adjacent fluid region, Lagrangian impingement and
ejection, transfer to and from a VoF phase etc. will be added in the future via
the standard fvModels interface.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleMultiphaseInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleMultiphaseVoF.
compressibleMultiphaseVoF is derived from the multiphaseVoFSolver which adds
compressible multiphase capability to the VoFSolver base-class used as the basis
of all two-phase and multiphase VoF solvers.
Class
Foam::solvers::compressibleMultiphaseVoF
Description
Solver module for the solution of multiple compressible, isothermal
immiscible fluids using a VOF (volume of fluid) phase-fraction based
interface capturing approach, with optional mesh motion and mesh topology
changes including adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
A mixture approach for momentum transport is provided in which a single
laminar, RAS or LES model is selected to model the momentum stress.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
SourceFiles
compressibleMultiphaseVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::multiphaseVoFSolver
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces multiphaseInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleMultiphaseVoF.
incompressibleMultiphaseVoF is derived from the multiphaseVoFSolver which adds
multiphase capability to the VoFSolver base-class used as the basis of all
two-phase and multiphase VoF solvers.
Class
Foam::solvers::incompressibleMultiphaseVoF
Description
Solver module for the solution of multiple incompressible, isothermal
immiscible fluids using a VOF (volume of fluid) phase-fraction based
interface capturing approach, with optional mesh motion and mesh topology
changes including adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
A mixture approach for momentum transport is provided in which a single
laminar, RAS or LES model is selected to model the momentum stress.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
SourceFiles
incompressibleMultiphaseVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::multiphaseVoFSolver
Much of the VoF functionality, particularly relating to momentum solution, is
independent of the number of phases and it is useful to hold this generic VoF
data and functionality in an abstract base-class and derive twoPhaseVoFSolver
and multiphaseVoFSolver from it, adding two-phase and multiphase functionality
respectively.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces XiFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/XiFluid.
Class
Foam::solvers::XiFluid
Description
Solver module for compressible premixed/partially-premixed combustion with
turbulence modelling.
Combusting RANS code using the b-Xi two-equation model.
Xi may be obtained by either the solution of the Xi transport
equation or from an algebraic expression. Both approaches are
based on Gulder's flame speed correlation which has been shown
to be appropriate by comparison with the results from the
spectral model.
Strain effects are encorporated directly into the Xi equation
but not in the algebraic approximation. Further work need to be
done on this issue, particularly regarding the enhanced removal rate
caused by flame compression. Analysis using results of the spectral
model will be required.
For cases involving very lean Propane flames or other flames which are
very strain-sensitive, a transport equation for the laminar flame
speed is present. This equation is derived using heuristic arguments
involving the strain time scale and the strain-rate at extinction.
the transport velocity is the same as that for the Xi equation.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, chemical reactions,
combustion, Lagrangian particles, radiation, surface film etc. and
constraining or limiting the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
XiFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces interFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/incompressibleVoF.
Both incompressibleVoF and compressibleVoF solver modules are derived from the
common two-phase VoF base-class solvers::VoFSolver which handles the
complexities of VoF interface-compression, boundedness and conservation with
2nd-order schemes in space and time using the semi-implicit MULES limiter and
solution proceedure. This maximises code re-use, improves readability and
simplifies maintenance.
Class
Foam::solvers::incompressibleVoF
Description
Solver module for for 2 incompressible, isothermal immiscible fluids using a
VOF (volume of fluid) phase-fraction based interface capturing approach,
with optional mesh motion and mesh topology changes including adaptive
re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
incompressibleVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::compressibleVoF
Given that the number of solid solver modules is currently 1 and unlikely to
exceed 3 it is not very useful to maintain solid and fluid sub-directories and
easier to see the correspondence between the solver modules and tutorial cases
without.
