0ed84ff137
compressibleVoF,multiphaseEuler: Renamed compressibility dilatation dgdt to vDot
...
Currently in compressibleVoF vDot contains only the compressibility dilatation
effect whereas in multiphaseEuler the effect of sources are also included but
this will be refactored shortly so that the handling of mass sources and
compressibility is consistent between VoF and Euler-Euler solvers.
The previously hard-coded 1e-4 division stabilisation used when linearising vDot
for bounded semi-implicit solution of the phase-fractions is now an optional
user-input with keyword vDotResidualAlpha, e.g. in multiphaseEuler:
solvers
{
"alpha.*"
{
nAlphaCorr 1;
nAlphaSubCycles 2;
vDotResidualAlpha 1e-6;
}
.
.
.
2023-11-03 13:19:52 +00:00
a5ea0b41f1
fvModels: Improved interface for mass/volume sources
...
The interface for fvModels has been modified to improve its application
to "proxy" equations. That is, equations that are not straightforward
statements of conservation laws in OpenFOAM's usual convention.
A standard conservation law typically takes the following form:
fvMatrix<scalar> psiEqn
(
fvm::ddt(alpha, rho, psi)
+ <fluxes>
==
<sources>
);
A proxy equation, on the other hand, may be a derivation or
rearrangement of a law like this, and may be linearised in terms of a
different variable.
The pressure equation is the most common example of a proxy equation. It
represents a statement of the conservation of volume or mass, but it is
a rearrangement of the original continuity equation, and it has been
linearised in terms of a different variable; the pressure. Another
example is that in the pre-predictor of a VoF solver the
phase-continuity equation is constructed, but it is linearised in terms
of volume fraction rather than density.
In these situations, fvModels sources are now applied by calling:
fvModels().sourceProxy(<conserved-fields ...>, <equation-field>)
Where <conserved-fields ...> are (alpha, rho, psi), (rho, psi), just
(psi), or are omitted entirely (for volume continuity), and the
<equation-field> is the field associated with the proxy equation. This
produces a source term identical in value to the following call:
fvModels().source(<conserved-fields ...>)
It is only the linearisation in terms of <equation-field> that differs
between these two calls.
This change permits much greater flexibility in the handling of mass and
volume sources than the previous name-based system did. All the relevant
fields are available, dimensions can be used in the logic to determine
what sources are being constructed, and sources relating to a given
conservation law all share the same function.
This commit adds the functionality for injection-type sources in the
compressibleVoF solver. A following commit will add a volume source
model for use in incompressible solvers.
2023-09-28 09:04:31 +01:00
e744fdb5f1
Modular solvers: Reorganised directory structure of applications and tutorials
...
The new flexible and extensible modular solvers structure already provides most
of the simulation functionality needed for single phase, multiphase,
multicomponent etc. fluid flow problems as well as a very effective method of
combining these with solid heat transfer, solid stress, surface film to solve
complex multi-region, multi-physics problems and are now the primary mechanism
for the further development of OpenFOAM simulation capability in future. To
emphasis this for both users and developers the applications/solvers directory
has been separated into applications/modules containing all the solver modules:
├── modules
│ ├── compressibleMultiphaseVoF
│ ├── compressibleVoF
│ ├── film
│ ├── fluid
│ ├── fluidSolver
│ ├── functions
│ ├── incompressibleDenseParticleFluid
│ ├── incompressibleDriftFlux
│ ├── incompressibleFluid
│ ├── incompressibleMultiphaseVoF
│ ├── incompressibleVoF
│ ├── isothermalFilm
│ ├── isothermalFluid
│ ├── movingMesh
│ ├── multicomponentFluid
│ ├── multiphaseEuler
│ ├── multiphaseVoFSolver
│ ├── shockFluid
│ ├── solid
│ ├── solidDisplacement
│ ├── twoPhaseSolver
│ ├── twoPhaseVoFSolver
│ ├── VoFSolver
│ └── XiFluid
applications/solvers containing the foamRun and foamMultiRun solver applications
which instantiate and execute the chosen solver modules and also standalone
solver applications for special initialisation and test activities:
├── solvers
│ ├── boundaryFoam
│ ├── chemFoam
│ ├── foamMultiRun
│ ├── foamRun
│ └── potentialFoam
and applications/legacy containing legacy solver applications which are not
currently being actively developed but the functionality of which will be merged
into the solver modules or form the basis of new solver modules as the need
arises:
├── legacy
│ ├── basic
│ │ ├── financialFoam
│ │ └── laplacianFoam
│ ├── combustion
│ │ └── PDRFoam
│ ├── compressible
│ │ └── rhoPorousSimpleFoam
│ ├── electromagnetics
│ │ ├── electrostaticFoam
│ │ ├── magneticFoam
│ │ └── mhdFoam
│ ├── incompressible
│ │ ├── adjointShapeOptimisationFoam
│ │ ├── dnsFoam
│ │ ├── icoFoam
│ │ ├── porousSimpleFoam
│ │ └── shallowWaterFoam
│ └── lagrangian
│ ├── dsmcFoam
│ ├── mdEquilibrationFoam
│ └── mdFoam
Correspondingly the tutorials directory structure has been reorganised with the
modular solver directories at the top level with names that make it easier for
users to find example cases relating to their particular requirements and a
legacy sub-directory containing cases corresponding to the legacy solver
applications listed above:
├── compressibleMultiphaseVoF
│ └── damBreak4phaseLaminar
├── compressibleVoF
│ ├── ballValve
│ ├── climbingRod
│ ├── damBreak
│ ├── depthCharge2D
│ ├── depthCharge3D
│ ├── sloshingTank2D
│ └── throttle
├── film
│ └── rivuletPanel
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
├── incompressibleDenseParticleFluid
│ ├── column
│ ├── cyclone
│ ├── Goldschmidt
│ ├── GoldschmidtMPPIC
│ └── injectionChannel
├── incompressibleDriftFlux
│ ├── dahl
│ ├── mixerVessel2DMRF
│ └── tank3D
├── incompressibleFluid
│ ├── airFoil2D
│ ├── ballValve
│ ├── blockedChannel
│ ├── cavity
│ ├── cavityCoupledU
│ ├── channel395
│ ├── drivaerFastback
│ ├── ductSecondaryFlow
│ ├── elipsekkLOmega
│ ├── flowWithOpenBoundary
│ ├── hopperParticles
│ ├── impeller
│ ├── mixerSRF
│ ├── mixerVessel2D
│ ├── mixerVessel2DMRF
│ ├── mixerVesselHorizontal2DParticles
│ ├── motorBike
│ ├── motorBikeSteady
│ ├── movingCone
│ ├── offsetCylinder
│ ├── oscillatingInlet
│ ├── pipeCyclic
│ ├── pitzDaily
│ ├── pitzDailyLES
│ ├── pitzDailyLESDevelopedInlet
│ ├── pitzDailyLTS
│ ├── pitzDailyPulse
│ ├── pitzDailyScalarTransport
│ ├── pitzDailySteady
│ ├── pitzDailySteadyExperimentalInlet
│ ├── pitzDailySteadyMappedToPart
│ ├── pitzDailySteadyMappedToRefined
│ ├── planarContraction
│ ├── planarCouette
│ ├── planarPoiseuille
│ ├── porousBlockage
│ ├── propeller
│ ├── roomResidenceTime
│ ├── rotor2DRotating
│ ├── rotor2DSRF
│ ├── rotorDisk
│ ├── T3A
│ ├── TJunction
│ ├── TJunctionFan
│ ├── turbineSiting
│ ├── waveSubSurface
│ ├── windAroundBuildings
│ └── wingMotion
├── incompressibleMultiphaseVoF
│ ├── damBreak4phase
│ ├── damBreak4phaseFineLaminar
│ ├── damBreak4phaseLaminar
│ └── mixerVessel2DMRF
├── incompressibleVoF
│ ├── angledDuct
│ ├── capillaryRise
│ ├── cavitatingBullet
│ ├── climbingRod
│ ├── containerDischarge2D
│ ├── damBreak
│ ├── damBreakLaminar
│ ├── damBreakPorousBaffle
│ ├── damBreakWithObstacle
│ ├── DTCHull
│ ├── DTCHullMoving
│ ├── DTCHullWave
│ ├── floatingObject
│ ├── floatingObjectWaves
│ ├── forcedUpstreamWave
│ ├── mixerVessel
│ ├── mixerVessel2DMRF
│ ├── mixerVesselHorizontal2D
│ ├── nozzleFlow2D
│ ├── planingHullW3
│ ├── propeller
│ ├── sloshingCylinder
│ ├── sloshingTank2D
│ ├── sloshingTank2D3DoF
│ ├── sloshingTank3D
│ ├── sloshingTank3D3DoF
│ ├── sloshingTank3D6DoF
│ ├── testTubeMixer
│ ├── waterChannel
│ ├── wave
│ ├── wave3D
│ └── weirOverflow
├── isothermalFilm
│ └── rivuletPanel
├── isothermalFluid
│ ├── potentialFreeSurfaceMovingOscillatingBox
│ └── potentialFreeSurfaceOscillatingBox
├── legacy
│ ├── basic
│ │ ├── financialFoam
│ │ │ └── europeanCall
│ │ └── laplacianFoam
│ │ └── flange
│ ├── combustion
│ │ └── PDRFoam
│ │ └── flamePropagationWithObstacles
│ ├── compressible
│ │ └── rhoPorousSimpleFoam
│ │ ├── angledDuctExplicit
│ │ └── angledDuctImplicit
│ ├── electromagnetics
│ │ ├── electrostaticFoam
│ │ │ └── chargedWire
│ │ └── mhdFoam
│ │ └── hartmann
│ ├── incompressible
│ │ ├── adjointShapeOptimisationFoam
│ │ │ └── pitzDaily
│ │ ├── dnsFoam
│ │ │ └── boxTurb16
│ │ ├── icoFoam
│ │ │ ├── cavity
│ │ │ └── elbow
│ │ ├── porousSimpleFoam
│ │ │ ├── angledDuctExplicit
│ │ │ └── angledDuctImplicit
│ │ └── shallowWaterFoam
│ │ └── squareBump
│ ├── lagrangian
│ │ ├── dsmcFoam
│ │ │ ├── freeSpacePeriodic
│ │ │ ├── freeSpaceStream
│ │ │ ├── supersonicCorner
│ │ │ └── wedge15Ma5
│ │ ├── mdEquilibrationFoam
│ │ │ ├── periodicCubeArgon
│ │ │ └── periodicCubeWater
│ │ └── mdFoam
│ │ └── nanoNozzle
├── mesh
│ ├── blockMesh
│ │ ├── pipe
│ │ ├── sphere
│ │ ├── sphere7
│ │ └── sphere7ProjectedEdges
│ ├── refineMesh
│ │ └── refineFieldDirs
│ └── snappyHexMesh
│ ├── flange
│ └── pipe
├── movingMesh
│ └── SnakeRiverCanyon
├── multicomponentFluid
│ ├── aachenBomb
│ ├── counterFlowFlame2D
│ ├── counterFlowFlame2D_GRI
│ ├── counterFlowFlame2D_GRI_TDAC
│ ├── counterFlowFlame2DLTS
│ ├── counterFlowFlame2DLTS_GRI_TDAC
│ ├── DLR_A_LTS
│ ├── filter
│ ├── lockExchange
│ ├── membrane
│ ├── nc7h16
│ ├── parcelInBox
│ ├── SandiaD_LTS
│ ├── simplifiedSiwek
│ ├── smallPoolFire2D
│ ├── smallPoolFire3D
│ ├── verticalChannel
│ ├── verticalChannelLTS
│ └── verticalChannelSteady
├── multiphaseEuler
│ ├── bed
│ ├── bubbleColumn
│ ├── bubbleColumnEvaporating
│ ├── bubbleColumnEvaporatingDissolving
│ ├── bubbleColumnEvaporatingReacting
│ ├── bubbleColumnIATE
│ ├── bubbleColumnLaminar
│ ├── bubbleColumnLES
│ ├── bubblePipe
│ ├── damBreak4phase
│ ├── fluidisedBed
│ ├── fluidisedBedLaminar
│ ├── Grossetete
│ ├── hydrofoil
│ ├── injection
│ ├── LBend
│ ├── mixerVessel2D
│ ├── mixerVessel2DMRF
│ ├── pipeBend
│ ├── steamInjection
│ ├── titaniaSynthesis
│ ├── titaniaSynthesisSurface
│ ├── wallBoilingIATE
│ ├── wallBoilingPolydisperse
│ └── wallBoilingPolydisperseTwoGroups
├── multiRegion
│ ├── CHT
│ │ ├── circuitBoardCooling
│ │ ├── coolingCylinder2D
│ │ ├── coolingSphere
│ │ ├── heatedDuct
│ │ ├── heatExchanger
│ │ ├── multiphaseCoolingCylinder2D
│ │ ├── reverseBurner
│ │ ├── shellAndTubeHeatExchanger
│ │ ├── VoFcoolingCylinder2D
│ │ └── wallBoiling
│ └── film
│ ├── cylinder
│ ├── cylinderDripping
│ ├── cylinderVoF
│ ├── hotBoxes
│ ├── rivuletBox
│ ├── rivuletPanel
│ ├── splashPanel
│ └── VoFToFilm
├── potentialFoam
│ ├── cylinder
│ └── pitzDaily
├── resources
│ ├── blockMesh
│ ├── geometry
│ └── thermoData
├── shockFluid
│ ├── biconic25-55Run35
│ ├── forwardStep
│ ├── LadenburgJet60psi
│ ├── movingCone
│ ├── obliqueShock
│ ├── shockTube
│ └── wedge15Ma5
├── solidDisplacement
│ ├── beamEndLoad
│ └── plateHole
└── XiFluid
├── kivaTest
└── moriyoshiHomogeneous
2023-05-25 18:14:41 +01:00
