The phase system now have the ability to specify the derivative of mass
transfer rates w.r.t. pressure. This permits implicit handling of
pressure-coupled mass transfer processes.
This implicit handling has been applied to the mass transfers that are
modelled by the thermal phase system. This should result in significant
stability improvements. The implicit handling can be toggled on or off
by means of a "pressureImplicit" switch in constant/phaseProperties. It
is on by default.
Patch contributed by Juho Peltola, VTT.
The new fvModels is a general interface to optional physical models in the
finite volume framework, providing sources to the governing conservation
equations, thus ensuring consistency and conservation. This structure is used
not only for simple sources and forces but also provides a general run-time
selection interface for more complex models such as radiation and film, in the
future this will be extended to Lagrangian, reaction, combustion etc. For such
complex models the 'correct()' function is provided to update the state of these
models at the beginning of the PIMPLE loop.
fvModels are specified in the optional constant/fvModels dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The new fvConstraints is a general interface to optional numerical constraints
applied to the matrices of the governing equations after construction and/or to
the resulting field after solution. This system allows arbitrary changes to
either the matrix or solution to ensure numerical or other constraints and hence
violates consistency with the governing equations and conservation but it often
useful to ensure numerical stability, particularly during the initial start-up
period of a run. Complex manipulations can be achieved with fvConstraints, for
example 'meanVelocityForce' used to maintain a specified mean velocity in a
cyclic channel by manipulating the momentum matrix and the velocity solution.
fvConstraints are specified in the optional system/fvConstraints dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The separation of fvOptions into fvModels and fvConstraints provides a rational
and consistent separation between physical and numerical models which is easier
to understand and reason about, avoids the confusing issue of location of the
controlling dictionary file, improves maintainability and easier to extend to
handle current and future requirements for optional complex physical models and
numerical constraints.
A number of fvOptions that apply to a user-derined field can now
automatically work what primitive type they apply to. These options can
apply to any field type, and in some cases even multiple fields of
differing type. Example usage of the options to which this change
applies are shown below:
codedSource1
{
type codedSource;
name codedSource1;
field h;
...
}
fixedValueConstraint1
{
type fixedValueConstraint;
fieldValues
{
R (1 0 0 1 0 1);
epsilon 150;
}
...
}
phaseLimitStabilization11
{
type phaseLimitStabilization;
field sigma.liquid;
...
}
Previously to apply to a given type, these options had to be selected
with the name of the type prepended to the option name (e.g., "type
symmTensorPhaseLimitStabilization;") and those that operated on multiple
fields were restricted to those fields being of the same type.
A number of other options have had improvements made to their handling
of user specification of fields. Where possible, the option will now
attempt to work out what field the option applies to automatically. The
following options, therefore, no longer require "field" or "fields"
entries:
actuationDiskSource
buoyancyEnergy
buoyancyForce
meanVelocityForce
rotorDiskSource
volumeFractionSource
constantHeatTransfer
function2HeatTransfer
variableHeatTransfer
Non-standard field names can be overridden in the same way as in
boundary conditions; e.g., the velocity name can be overridden with a "U
<UName>;" entry if it does not have the default name, "U". The name of
the energy field is now always determined from the thermodynamics
model and should always be correct. Some options that can be applied to
an individual phase also support a "phase <phaseName>;" entry;
fvOptions field-name handling has been rewritten to increase its
flexibility and to improve warning messages. The flexibility now allows
for options that apply to all fields, or all fields of a given phase,
rather than being limited to a specific list of field names. Messages
warning about options that have not been applied now always print just
once per time-step.
Mesh-motion with or without topology change or AMI is now supported in
multiphaseEulerFoam for both cell- and face-momentum algorithms.
The new tutorial case mixerVesselAMI2D is provided which is the AMI version of
the 4-phase MRF mixerVessel2D case. It is setup with the cell-momentum
algorithm but also runs fine with the face-momentum algorithm although the
results are noticeably less accurate, particularly when the case is run
single-phase and compared directly with those from pimpleFoam.
Further testing is in progress.
I2D/constant/thermophysicalProperties.water
The new multiphaseEulerFoam is based on reactingMultiphaseEulerFoam with some
improvements and rationalisation to assist maintenance and further development.
The phase system solution has been enhanced to handle two phases more
effectively and all two-phase specific models updated for compatibility so that
multiphaseEulerFoam can also replace reactingTwoPhaseEulerFoam.
When running multiphaseEulerFoam with only two-phases the default behaviour is
to solve for both phase-fractions but optionally a reference phase can be
specified so that only the other phase-fraction is solved, providing better
compatibility with the behaviour of reactingTwoPhaseEulerFoam.
All reactingMultiphaseEulerFoam and reactingTwoPhaseEulerFoam tutorials have
been updated for multiphaseEulerFoam.
