In multiphase systems it is only necessary to solve for all but one of the
moving phases. The new referencePhase option allows the user to specify which
of the moving phases should not be solved, e.g. in constant/phaseProperties of the
tutorials/multiphase/reactingMultiphaseEulerFoam/RAS/fluidisedBed tutorial case with
phases (particles air);
referencePhase air;
the particles phase is solved for and the air phase fraction and fluxes obtained
from the particles phase which provides equivalent behaviour to
reactingTwoPhaseEulerFoam and is more efficient than solving for both phases.
The thermal phase system now operates with saturation models specified
per phase-pair, and can therefore represent multiple transfer processes
across different interfaces. There is no longer a "phaseChange" switch;
instead the selection of a saturation model for a given interface
enables phase change across that interface. This includes both
interfacial phase change and nucleate wall boiling.
Both interfacial phase change and wall boiling models now include
support for there being a single specified volatile component which
undergoes phase change.
A correction has been made to the phase change energy transfer when only
interfacial phase change is enabled.
The thermal phase change tutorials have all been updated to reflect
these changes in the user interface.
Patch contributed by Juho Peltola, VTT.
The kOmegaSSTSata model can now be used in multiphase cases, provided
that there is a single, well defined continuous phase. As previously,
the continuous phase is the phase for which the model is selected (i.e.,
in the constant/turbulenceProperties.<continuous-phase-name>
dictionary).
By default, now, all other moving phases are considered to be dispersed
bubble phases, and the effect of all of them is summed to calculate the
overall bubble induced turbulence.
This behaviour can be overridden by means of a "dispersedPhases" entry,
which takes a list of the phases to be considered dispersed by the
model.
Patch contributed by Timo Niemi, VTT.
Function1 has been generalised in order to provide functionality
previously provided by some near-duplicate pieces of code.
The interpolationTable and tableReader classes have been removed and
their usage cases replaced by Function1. The interfaces to Function1,
Table and TableFile has been improved for the purpose of using it
internally; i.e., without user input.
Some boundary conditions, fvOptions and function objects which
previously used interpolationTable or other low-level interpolation
classes directly have been changed to use Function1 instead. These
changes may not be backwards compatible. See header documentation for
details.
In addition, the timeVaryingUniformFixedValue boundary condition has
been removed as its functionality is duplicated entirely by
uniformFixedValuePointPatchField.
Mass transfer rates now have a more comprehensive naming convention.
"dmdt" means a bulk/mixture transfer, whilst "dmidt" is for a
specie-specific transfer. "dmdt" implies a transfer into a phase, whilst
"dmdtf" means a transfer across an interface. Tables or lists of
transfers are denoted by pluralising the name with the suffix "s"; e.g.,
"dmdtfs". All registered mass transfer rate fields have names which
include the name of the sub-model or phase system which generated them.
The phaseTransfer models have been changed so that the mixture and the
specie-specific mass transfers are independent. This simplifies the
naming convention required for registering the resulting mass transfers
and reduces the amount of logic necessary in the phase system.
The inheritance pattern of the alphat wall functions has been altered so
that the code and parameters relating to phase change are reused, and so
that the base (the Jayatilleke wall function) more closely resembles the
library implementation. This should make it easier to remove it when the
library function is generalised enough to use it directly.
The phaseSystem::zero*Field construction functions have been removed as
their behaviour regarding registration was not clear, and in most
instances of their usage the GeometriField<...>::New methods are
similarly convenient.
This change adds representation of the shape of a dispersed phase. A
layer has been added to model the relationship between the
characteristic volume of a sizeGroup and its physical diameter.
Previously this relationship was represented by a constant form factor.
Currently, two shape models are available:
- spherical
- fractal (for modelling fractal agglomerates)
The latter introduces the average surface area to volume ratio, kappa,
of the entities in a size group as a secondary field-dependent internal
variable to the population balance equation, which makes the population
balance approach "quasi-"bivariate. From kappa and a constant mass
fractal dimension, a collisional diameter can be derived which affects
the coagulation rates computed by the following models:
- ballisticCollisions
- brownianCollisions
- DahnekeInterpolation
- turbulentShear
The fractal shape modelling also takes into account the effect of sintering
of primary particles on the surface area of the aggregate.
Further additions/changes:
- Time scale filtering for handling large drag and heat transfer
coefficients occurring for particles in the nanometre range
- Aerosol drag model based on Stokes drag with a Knudsen number based
correction (Cunningham correction)
- Reaction driven nucleation
- A complete redesign of the sizeDistribution functionObject
The functionality is demonstrated by a tutorial case simulating the
vapour phase synthesis of titania by titanium tetrachloride oxidation.
Patch contributed by Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden -
Rossendorf (HZDR) and VTT Technical Research Centre of Finland Ltd.
All reactingEulerFoam wall boiling tutorials have been replaced with
cases that are more representative of real applications.
The wall boiling tutorials for reactingTwoPhaseEulerFoam are:
RAS/wallBoiling:
Axi-symmetric wall boiling case with constant bubble diameter
RAS/wallBoilingPolyDisperse:
As wallBoiling, but with a homogenous class method population
balance for modelling the bubble diameters
RAS/wallBoilingIATE:
As wallBoiling, but with an interfacial area transport equation
for modelling the bubble diameters
The wall boiling tutorials for reactingMultiphaseEulerFoam are:
RAS/wallBoilingPolydisperseTwoGroups:
As wallBoiling, but with an inhomogenous class method population
balance for modelling the bubble diameters
Patch contributed by Juho Peltola, VTT.
Now for transient simulations "Final" solver settings are required for ALL
equations providing consistency between the solution of velocity, energy,
composition and radiation properties.
However "Final" relaxation factors are no longer required for fields or
equations and if not present the standard value for the variable will be
applied. Given that relaxation factors other than 1 are rarely required for
transient runs and hence the same for all iterations including the final one
this approach provide simpler input while still providing the flexibility to
specify a different value for the final iteration if required. For steady cases
it is usual to execute just 1 outer iteration per time-step for which the
standard relaxation factors are appropriate, and if more than one iteration is
executed it is common to use the same factors for both. In the unlikely event
of requiring different relaxation factors for the final iteration this is still
possible to specify via the now optional "Final" specification.
An additional layer has been added into the phase system hierarchy which
facilitates the application of phase transfer modelling. These are
models which exchange mass between phases without the thermal coupling
that would be required to represent phase change. They can be thought of
as representation changes; e.g., between two phases representing
different droplet sizes of the same physical fluid.
To facilitate this, the heat transfer phase systems have been modified
and renamed and now both support mass transfer. The two sided version
is only required for derivations which support phase change.
The following changes to case settings have been made:
- The simplest instantiated phase systems have been renamed to
basicTwoPhaseSystem and basicMultiphaseSystem. The
heatAndMomentumTransfer*System entries in constant/phaseProperties files
will need updating accordingly.
- A phaseTransfer sub-model entry will be required in the
constant/phaseProperties file. This can be an empty list.
- The massTransfer switch in thermal phase change cases has been renamed
phaseTransfer, so as not to be confused with the mass transfer models
used by interface composition cases.
This work was supported by Georg Skillas and Zhen Li, at Evonik
Sub-model blending should be set such that the sum of all the blending
coefficients equals one. If there are three models specified for a phase
pair (e.g., (air in water), (water in air) and (air and water)), then
the sum-to-one constraint is guaranteed by the blending functions.
Frequently, however, the symmetric model ((air and water) in this
example) is omitted. In that case, the blending coefficients should be
selected so that the sum of just the two non-symmetric coefficients
equal one.
In the case of linear blending, this means setting the minimum partially
continuous alpha to one-minus the fully continuous value of the opposite
phase. For example:
blending
{
default
{
type linear;
minFullyContinuousAlpha.air 0.7;
minPartlyContinuousAlpha.air 0.3;
minFullyContinuousAlpha.water 0.7;
minPartlyContinuousAlpha.water 0.3;
}
}
The reactingTwoPhaseEulerFoam and reactingMultiPhaseEulerFoam tutorials
have been modified to adhere to this principle.
This change means that getApplication still works if we have a
controlDict.orig, rather than a controlDict. This allows us to simplify
the scripting of tutorials in which the controlDict is modified.
Introduced thermalPhaseChangePopulationBalanceTwo- and MultiphaseSystem as
user-selectable phaseSystems which are the first to actually use multiple mass
transfer mechanisms enabled by
commit d3a237f560.
The functionality is demonstrated using the reactingTwoPhaseEulerFoam
wallBoilingPolydisperse tutorial.
Patch contributed by VTT Technical Research Centre of Finland Ltd and Institute
of Fluid Dynamics, Helmholtz-Zentrum Dresden - Rossendorf (HZDR).
- Thermal phase change and wall boiling functionality has been generalized to
support two- and multi- phase simulations.
- Thermal phase change now also allows purePhaseModel, which simplifies case setup.
- The phaseSystem templates have been restructured in preparation of multiple
simultaneous mass transfer mechanisms. For example, combination of thermal phase
and inhomogeneous population balance models.
Patch contributed by VTT Technical Research Centre of Finland Ltd and Institute
of Fluid Dynamics, Helmholtz-Zentrum Dresden - Rossendorf (HZDR).
