in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
Full backward-compatibility is provided which support for both multiComponentMixture and
multiComponentPhaseModel provided but all tutorials have been updated.
The reconstructPar utility now reconstructs the mesh if and when it is
necessary to do so. The reconstructParMesh utility is therefore no
longer necessary and has been removed.
It was necessary/advantagous to consolidate these utilities into one
because in the case of mesh changes it becomes increasingly less clear
which of the separate utilities is responsible for reconstructing data
that is neither clearly physical field nor mesh topology; e.g., moving
points, sets, refinement data, and so on.
The population balance model considers dilatation originating from density
change and mass transfer via source terms describing nucleation as well as
"drift" of the size distribution to smaller or larger sizes. Numerically, the
treatment does not necessarily equal the total dilatation, hence a correction is
introduced to ensure boundedness of the size group fractions.
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
and VTT Technical Research Centre of Finland Ltd.
This is a simple function that provides a convenient way for a user to
call fvc::reconstruct for the purposes of post-processing flux fields;
e.g., to construct a cell velocity from a face flux.
It can be used to generate output during a run by adding the following
settings to a case's controlDict:
functions
{
#includeFunc reconstruct(phi)
}
Or it can be executed as a postProcessing step by calling:
postProcess -func "reconstruct(phi)"
The defaultPatch type currently defaults to empty which is appropriate for 1D
and 2D cases but not when creating the initial blockMesh for snappyHexMesh as
the presence of empty patches triggers the inappropriate application of 2D point
constraint corrections following snapping and morphing. To avoid this hidden
problem a warning is now generated from blockMesh when the defaultPatch is not
explicitly set for cases which generate a default patch, i.e. for which the
boundary is not entirely defined. e.g.
.
.
.
Creating block mesh topology
--> FOAM FATAL IO ERROR:
The 'defaultPatch' type must be specified for the 'defaultFaces' patch, e.g. for snappyHexMesh
defaultPatch
{
name default; // optional
type patch;
}
or for 2D meshes
defaultPatch
{
name frontAndBack; // optional
type empty;
}
.
.
.
All the tutorials have been update to include the defaultPatch specification as
appropriate.
Solver for steady or transient buoyant, turbulent flow of compressible fluids
for ventilation and heat-transfer, with optional mesh motion and mesh topology
changes. Created by merging buoyantSimpleFoam and buoyantPimpleFoam to provide
a more general solver and simplify maintenance.
Updated tutorials for the changes to the blending system. Cases using
"none" blending have been updated to use "continuous" or "segregated" as
appropriate.
The bed tutorial has been extended to include a proper switch to a bed
drag model (AttouFerschneider) when the solid phase displaces the
fluids. This change made the trickleBed case a subset of the bed case,
so the trickleBed has been removed.
These changes are not required for the cases to run with the new
phaseInterface system. The syntax prior to this commit will be read in
the new phaseInterface system's backwards compatibility mode.
This model will generate an error if the diameter is requested. This
will happen if another sub model is included that depends on the
diameter of the continuous phase. It therefore provides a check that the
sub-modelling combination is valid.
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
Following the addition of the new moments functionObject, all related
functionality was removed from sizeDistribution.
In its revised version, sizeDistribution allows for different kinds of
weighted region averaging in case of field-dependent representative
particle properties.
A packaged function has also been added to allow for command line solver
post-processing.
For example, the following function object specification returns the
volume-based number density function:
numberDensity
{
type sizeDistribution;
libs ("libmultiphaseEulerFoamFunctionObjects.so");
writeControl writeTime;
populationBalance bubbles;
functionType numberDensity;
coordinateType volume;
setFormat raw;
}
The same can be achieved using a packaged function:
#includeFunc sizeDistribution
(
populationBalance=bubbles,
functionType=numberDensity,
coordinateType=volume,
funcName=numberDensity
)
Or on the command line:
multiphaseEulerFoam -postProcess -func "
sizeDistribution
(
populationBalance=bubbles,
functionType=numberDensity,
coordinateType=volume,
funcName=numberDensity
)"
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
This function calculates integral (integer moments) or mean properties
(mean, variance, standard deviation) of a size distribution computed with
multiphaseEulerFoam. It has to be run with multiphaseEulerFoam, either
at run-time or with -postProcess. It will not work with the postProcess
utility.
The following function object specification for example returns the first
moment of the volume-based number density function which is equivalent to
the phase fraction of the particulate phase:
moments
{
type moments;
libs ("libmultiphaseEulerFoamFunctionObjects.so");
executeControl timeStep;
writeControl writeTime;
populationBalance bubbles;
momentType integerMoment;
coordinateType volume;
order 1;
}
The same can be achieved using a packaged function:
#includeFunc moments
(
populationBalance=bubbles,
momentType=integerMoment,
coordinateType=volume,
order=1,
funcName=moments
)
Or on the command line:
multiphaseEulerFoam -postProcess -func "
moments
(
populationBalance=bubbles,
momentType=integerMoment,
coordinateType=volume,
order=1,
funcName=moments
)"
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
These models are quite configuration specific. It makes sense to make
them sub-models of the force (drag or lift) models that use them, rather
than making them fundamental properties of the phase system.
This function generates plots of fields averaged over the layers in the
mesh. It is a generalised replacement for the postChannel utility, which
has been removed. An example of this function's usage is as follows:
layerAverage1
{
type layerAverage;
libs ("libfieldFunctionObjects.so");
writeControl writeTime;
setFormat raw;
// Patches and/or zones from which layers extrude
patches (bottom);
zones (quarterPlane threeQuartersPlane);
// Spatial component against which to plot
component y;
// Is the geometry symmetric around the centre layer?
symmetric true;
// Fields to average and plot
fields (pMean pPrime2Mean UMean UPrime2Mean k);
}
Sampled sets and streamlines now write all their fields to the same
file. This prevents excessive duplication of the geometry and makes
post-processing tasks more convenient.
"axis" entries are now optional in sampled sets and streamlines. When
omitted, a default entry will be used, which is chosen appropriately for
the coordinate set and the write format. Some combinations are not
supported. For example, a scalar ("x", "y", "z" or "distance") axis
cannot be used to write in the vtk format, as vtk requires 3D locations
with which to associate data. Similarly, a point ("xyz") axis cannot be
used with the gnuplot format, as gnuplot needs a single scalar to
associate with the x-axis.
Streamlines can now write out fields of any type, not just scalars and
vectors, and there is no longer a strict requirement for velocity to be
one of the fields.
Streamlines now output to postProcessing/<functionName>/time/<file> in
the same way as other functions. The additional "sets" subdirectory has
been removed.
The raw set writer now aligns columns correctly.
The handling of segments in coordSet and sampledSet has been
fixed/completed. Segments mean that a coordinate set can represent a
number of contiguous lines, disconnected points, or some combination
thereof. This works in parallel; segments remain contiguous across
processor boundaries. Set writers now only need one write method, as the
previous "writeTracks" functionality is now handled by streamlines
providing the writer with the appropriate segment structure.
Coordinate sets and set writers now have a convenient programmatic
interface. To write a graph of A and B against some coordinate X, in
gnuplot format, we can call the following:
setWriter::New("gnuplot")->write
(
directoryName,
graphName,
coordSet(true, "X", X), // <-- "true" indicates a contiguous
"A", // line, "false" would mean
A, // disconnected points
"B",
B
);
This write function is variadic. It supports any number of
field-name-field pairs, and they can be of any primitive type.
Support for Jplot and Xmgrace formats has been removed. Raw, CSV,
Gnuplot, VTK and Ensight formats are all still available.
The old "graph" functionality has been removed from the code, with the
exception of the randomProcesses library and associated applications
(noise, DNSFoam and boxTurb). The intention is that these should also
eventually be converted to use the setWriters. For now, so that it is
clear that the "graph" functionality is not to be used elsewhere, it has
been moved into a subdirectory of the randomProcesses library.
The surfaceInterpolate function object is now a field expression. This
means it works in the same way as mag, grad, etc... It also now has a
packaged configuration and has been included into the postProcessing
test case.
It can be used in the following ways. On the command line:
postProcess -func "surfaceInterpolate(rho, result=rhof)"
rhoPimpleFoam -postProcess -func "surfaceInterpolate(thermo:rho, result=rhof)"
In the controlDict:
functions
{
#includeFunc surfaceInterpolate(rho, result=rhof)
}
By running:
foamGet surfaceInterpolate
Then editing the resulting system/surfaceInterpolate file and then
running postProcess or adding an #includeFunc entry without arguments.
to provide a single consistent code and user interface to the specification of
physical properties in both single-phase and multi-phase solvers. This redesign
simplifies usage and reduces code duplication in run-time selectable solver
options such as 'functionObjects' and 'fvModels'.
* physicalProperties
Single abstract base-class for all fluid and solid physical property classes.
Physical properties for a single fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties' dictionary.
Physical properties for a phase fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties.<phase>' dictionary.
This replaces the previous inconsistent naming convention of
'transportProperties' for incompressible solvers and
'thermophysicalProperties' for compressible solvers.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the
'physicalProperties' dictionary does not exist.
* phaseProperties
All multi-phase solvers (VoF and Euler-Euler) now read the list of phases and
interfacial models and coefficients from the
'constant/<region>/phaseProperties' dictionary.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the 'phaseProperties'
dictionary does not exist. For incompressible VoF solvers the
'transportProperties' is automatically upgraded to 'phaseProperties' and the
two 'physicalProperties.<phase>' dictionary for the phase properties.
* viscosity
Abstract base-class (interface) for all fluids.
Having a single interface for the viscosity of all types of fluids facilitated
a substantial simplification of the 'momentumTransport' library, avoiding the
need for a layer of templating and providing total consistency between
incompressible/compressible and single-phase/multi-phase laminar, RAS and LES
momentum transport models. This allows the generalised Newtonian viscosity
models to be used in the same form within laminar as well as RAS and LES
momentum transport closures in any solver. Strain-rate dependent viscosity
modelling is particularly useful with low-Reynolds number turbulence closures
for non-Newtonian fluids where the effect of bulk shear near the walls on the
viscosity is a dominant effect. Within this framework it would also be
possible to implement generalised Newtonian models dependent on turbulent as
well as mean strain-rate if suitable model formulations are available.
* visosityModel
Run-time selectable Newtonian viscosity model for incompressible fluids
providing the 'viscosity' interface for 'momentumTransport' models.
Currently a 'constant' Newtonian viscosity model is provided but the structure
supports more complex functions of time, space and fields registered to the
region database.
Strain-rate dependent non-Newtonian viscosity models have been removed from
this level and handled in a more general way within the 'momentumTransport'
library, see section 'viscosity' above.
The 'constant' viscosity model is selected in the 'physicalProperties'
dictionary by
viscosityModel constant;
which is equivalent to the previous entry in the 'transportProperties'
dictionary
transportModel Newtonian;
but backward-compatibility is provided for both the keyword and model
type.
* thermophysicalModels
To avoid propagating the unnecessary constructors from 'dictionary' into the
new 'physicalProperties' abstract base-class this entire structure has been
removed from the 'thermophysicalModels' library. The only use for this
constructor was in 'thermalBaffle' which now reads the 'physicalProperties'
dictionary from the baffle region directory which is far simpler and more
consistent and significantly reduces the amount of constructor code in the
'thermophysicalModels' library.
* compressibleInterFoam
The creation of the 'viscosity' interface for the 'momentumTransport' models
allows the complex 'twoPhaseMixtureThermo' derived from 'rhoThermo' to be
replaced with the much simpler 'compressibleTwoPhaseMixture' derived from the
'viscosity' interface, avoiding the myriad of unused thermodynamic functions
required by 'rhoThermo' to be defined for the mixture.
Same for 'compressibleMultiphaseMixture' in 'compressibleMultiphaseInterFoam'.
This is a significant improvement in code and input consistency, simplifying
maintenance and further development as well as enhancing usability.
Henry G. Weller
CFD Direct Ltd.
and only needed if there is a name clash between entries in the source
specification and the set specification, e.g. "name":
{
name rotorCells;
type cellSet;
action new;
source zoneToCell;
sourceInfo
{
name cylinder;
}
}
Packaged function objects can now be deployed equally effectively by
(a) using a locally edited copy of the configuration file, or by
(b) passing parameters as arguments to the global configuration file.
For example, to post-process the pressure field "p" at a single location
"(1 2 3)", the user could first copy the "probes" packaged function
object file to their system directory by calling "foamGet probes". They
could then edit the file to contain the following entries:
points ((1 2 3));
field p;
The function object can then be executed by the postProcess application:
postProcess -func probes
Or it can be called at run-time, by including from within the functions
section of the system/controlDict file:
#includeFunc probes
Alternatively, the field and points parameters could be passed as
arguments either to the postProcess application by calling:
postProcess -func "probes(points=((1 2 3)), p)"
Or by using the #includeFunc directive:
#includeFunc probes(points=((1 2 3)), p)
In both cases, mandatory parameters that must be either edited or
provided as arguments are denoted in the configuration files with
angle-brackets, e.g.:
points (<points>);
Many of the packaged function objects have been split up to make them
more specific to a particular use-case. For example, the "surfaces"
function has been split up into separate functions for each surface
type; "cutPlaneSurface", "isoSurface", and "patchSurface". This
splitting means that the packaged functions now only contain one set of
relevant parameters so, unlike previously, they now work effectively
with their parameters passed as arguments. To ensure correct usage, all
case-dependent parameters are considered mandatory.
For example, the "streamlines" packaged function object has been split
into specific versions; "streamlinesSphere", "streamlinesLine",
"streamlinesPatch" and "streamlinesPoints". The name ending denotes the
seeding method. So, the following command creates ten streamlines with
starting points randomly seeded within a sphere with a specified centre
and radius:
postProcess -func "streamlinesSphere(nPoints=10, centre=(0 0 0), radius=1)"
The equivalent #includeFunc approach would be:
#includeFunc streamlinesSphere(nPoints=10, centre=(0 0 0), radius=1)
When passing parameters as arguments, error messages report accurately
which mandatory parameters are missing and provide instructions to
correct the format of the input. For example, if "postProcess -func
graphUniform" is called, then the code prints the following error message:
--> FOAM FATAL IO ERROR:
Essential value for keyword 'start' not set
Essential value for keyword 'end' not set
Essential value for keyword 'nPoints' not set
Essential value for keyword 'fields' not set
In function entry:
graphUniform
In command:
postProcess -func graphUniform
The function entry should be:
graphUniform(start = <point>, end = <point>, nPoints = <number>, fields = (<fieldNames>))
file: controlDict/functions/graphUniform from line 15 to line 25.
As always, a full list of all packaged function objects can be obtained
by running "postProcess -list", and a description of each function can
be obtained by calling "foamInfo <functionName>". An example case has
been added at "test/postProcessing/channel" which executes almost all
packaged function objects using both postProcess and #includeFunc. This
serves both as an example of syntax and as a unit test for maintenance.
The FOAM file format has not changed from version 2.0 in many years and so there
is no longer a need for the 'version' entry in the FoamFile header to be
required and to reduce unnecessary clutter it is now optional, defaulting to the
current file format 2.0.
The pressure work term for total internal energy is div(U p) which can be
discretised is various ways, given a mass flux field phi it seems logical to
implement it in the form div(phi/interpolate(rho), p) but this is not exactly
consistent with the relationship between enthalpy and internal energy (h = e +
p/rho) and the transport of enthalpy, it would be more consistent to implement
it in the form div(phi, p/rho). A further improvement in consistency can be
gained by using the same convection scheme for this work term and the convection
term div(phi, e) and for reacting solvers this is easily achieved by using the
multi-variate limiter mvConvection provided for energy and specie convection.
This more consistent total internal energy work term has now been implemented in
all the compressible and reacting flow solvers and provides more accurate
solutions when running with internal energy, particularly for variable density
mixing cases with small pressure variation.
For non-reacting compressible solvers this improvement requires a change to the
corresponding divScheme in fvSchemes:
"div\(alphaPhi.*,p\)" -> "div\(alphaRhoPhi.*,\(p\|thermo:rho.*\)\)"
and all the tutorials have been updated accordingly.
The current implementation of the uniform daughterSizeDistribution model
is not general enough to support uniform breakup into multiple fragments
while conserving both the total particle number and volume, except for
binary breakup (which was the default setting).
The model has therefore been renamed to uniformBinary, i.e. resulting in
two fragments.
It is currently used for verification purposes only. If the need for a
more general form arises, then that will require additional development.
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
and VTT Technical Research Centre of Finland Ltd.
The MomentumTransportModels library now builds of a standard set of
phase-incompressible and phase-compressible models. This replaces most
solver-specific builds of these models.
This has been made possible by the addition of a new
"dynamicTransportModel" interface, from which all transport classes used
by the momentum transport models now derive. For the purpose of
disambiguation, the old "transportModel" has also been renamed
"kinematicTransportModel".
This change has been made in order to create a consistent definition of
phase-incompressible and phase-compressible MomentumTransportModels,
which can then be looked up by functionObjects, fvModels, and similar.
Some solvers still build specific momentum transport models, but these
are now in addition to the standard set. The solver does not build all
the models it uses.
There are also corresponding centralised builds of phase dependent
ThermophysicalTransportModels.
pMin and pMax settings are now available in multiphaseEulerFoam in the
PIMPLE section of the system/fvOptions file. This is consistent with
other compressible solvers. The pMin setting in system/phaseProperties
is no longer read, and it's presence will result in a warning.
The new fvModels is a general interface to optional physical models in the
finite volume framework, providing sources to the governing conservation
equations, thus ensuring consistency and conservation. This structure is used
not only for simple sources and forces but also provides a general run-time
selection interface for more complex models such as radiation and film, in the
future this will be extended to Lagrangian, reaction, combustion etc. For such
complex models the 'correct()' function is provided to update the state of these
models at the beginning of the PIMPLE loop.
fvModels are specified in the optional constant/fvModels dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The new fvConstraints is a general interface to optional numerical constraints
applied to the matrices of the governing equations after construction and/or to
the resulting field after solution. This system allows arbitrary changes to
either the matrix or solution to ensure numerical or other constraints and hence
violates consistency with the governing equations and conservation but it often
useful to ensure numerical stability, particularly during the initial start-up
period of a run. Complex manipulations can be achieved with fvConstraints, for
example 'meanVelocityForce' used to maintain a specified mean velocity in a
cyclic channel by manipulating the momentum matrix and the velocity solution.
fvConstraints are specified in the optional system/fvConstraints dictionary and
backward-compatibility with fvOption is provided by reading the
constant/fvOptions or system/fvOptions dictionary if present.
The separation of fvOptions into fvModels and fvConstraints provides a rational
and consistent separation between physical and numerical models which is easier
to understand and reason about, avoids the confusing issue of location of the
controlling dictionary file, improves maintainability and easier to extend to
handle current and future requirements for optional complex physical models and
numerical constraints.
A population balance suffix after the phase suffix makes determining the
phase for a given name more complex. The additional suffix is also
unnecessary as a phase can only ever belong to one population balance,
so the phase name alone uniquely idetifies the grouping.
Patch contributed by Institute of Fluid Dynamics,
Helmholtz-Zentrum Dresden - Rossendorf (HZDR)
multiphaseEulerFoam now supports the "frozenFlow" setting in
system/fvSolution/PIMPLE. With this switch on, the pressure-velocity
system is not solved. Energy and species transport are simulated using
fixed velocity and pressure fields. Non-transport effects on the phase
fraction, such as mass transfer or fvOption sources, are also included.
Note that this setting does not enforce conservation. In general, any
processes that alter the phase fraction have to be set up carefully in
order to avoid generating an inconsistent set of phase fractions.
This switch has been enabled in two zero-dimensional test cases which
are designed to operate at a constant pressure. The "frozenFlow" switch
now enforces this constant pressure directly. Previously the pressure
equation was being solved, but the system was not well posed, and the
cases were failing to run as a result.
