The unreliable extrapolateProfile option has been replaced by the more flexible
and reliable profile option which allows the velocity profile to be specified as
a Function1 of the normalised distance to the wall. To simplify the
specification of the most common velocity profiles the new laminarBL (quadratic
profile) and turbulentBL (1/7th power law) Function1s are provided.
In addition to the new profile option the flow rate can now be specified as a
meanVelocity, volumetricFlowRate or massFlowRate, all of which are Function1s of
time.
The following tutorials have been updated to use the laminarBL profile:
multiphase/multiphaseEulerFoam/laminar/titaniaSynthesis
multiphase/multiphaseEulerFoam/laminar/titaniaSynthesisSurface
The following tutorials have been updated to use the turbulentBL profile:
combustion/reactingFoam/Lagrangian/verticalChannel
combustion/reactingFoam/Lagrangian/verticalChannelLTS
combustion/reactingFoam/Lagrangian/verticalChannelSteady
compressible/rhoPimpleFoam/RAS/angledDuct
compressible/rhoPimpleFoam/RAS/angledDuctLTS
compressible/rhoPimpleFoam/RAS/squareBendLiq
compressible/rhoPorousSimpleFoam/angledDuctImplicit
compressible/rhoSimpleFoam/angledDuctExplicitFixedCoeff
compressible/rhoSimpleFoam/squareBend
compressible/rhoSimpleFoam/squareBendLiq
heatTransfer/chtMultiRegionFoam/shellAndTubeHeatExchanger
heatTransfer/chtMultiRegionFoam/shellAndTubeHeatExchanger
incompressible/porousSimpleFoam/angledDuctImplicit
incompressible/porousSimpleFoam/straightDuctImplicit
multiphase/interFoam/RAS/angledDuct
Class
Foam::flowRateInletVelocityFvPatchVectorField
Description
Velocity inlet boundary condition creating a velocity field with
optionally specified profile normal to the patch adjusted to match the
specified mass flow rate, volumetric flow rate or mean velocity.
For a mass-based flux:
- the flow rate should be provided in kg/s
- if \c rho is "none" the flow rate is in m3/s
- otherwise \c rho should correspond to the name of the density field
- if the density field cannot be found in the database, the user must
specify the inlet density using the \c rhoInlet entry
For a volumetric-based flux:
- the flow rate is in m3/s
Usage
\table
Property | Description | Required | Default value
massFlowRate | Mass flow rate [kg/s] | no |
volumetricFlowRate | Volumetric flow rate [m^3/s]| no |
meanVelocity | Mean velocity [m/s]| no |
profile | Velocity profile | no |
rho | Density field name | no | rho
rhoInlet | Inlet density | no |
alpha | Volume fraction field name | no |
\endtable
Example of the boundary condition specification for a volumetric flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
volumetricFlowRate 0.2;
profile laminarBL;
}
\endverbatim
Example of the boundary condition specification for a mass flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
massFlowRate 0.2;
profile turbulentBL;
rho rho;
rhoInlet 1.0;
}
\endverbatim
Example of the boundary condition specification for a volumetric flow rate:
\verbatim
<patchName>
{
type flowRateInletVelocity;
meanVelocity 5;
profile turbulentBL;
}
\endverbatim
The \c volumetricFlowRate, \c massFlowRate or \c meanVelocity entries are
\c Function1 of time, see Foam::Function1s.
The \c profile entry is a \c Function1 of the normalised distance to the
wall. Any suitable Foam::Function1s can be used including
Foam::Function1s::codedFunction1 but Foam::Function1s::laminarBL and
Foam::Function1s::turbulentBL have been created specifically for this
purpose and are likely to be appropriate for most cases.
Note
- \c rhoInlet is required for the case of a mass flow rate, where the
density field is not available at start-up
- The value is positive into the domain (as an inlet)
- May not work correctly for transonic inlets
- Strange behaviour with potentialFoam since the U equation is not solved
See also
Foam::fixedValueFvPatchField
Foam::Function1s::laminarBL
Foam::Function1s::turbulentBL
Foam::Function1s
Foam::flowRateOutletVelocityFvPatchVectorField
8bb48df87f