b7ea5fcc29
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces XiFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/XiFluid.
Class
Foam::solvers::XiFluid
Description
Solver module for compressible premixed/partially-premixed combustion with
turbulence modelling.
Combusting RANS code using the b-Xi two-equation model.
Xi may be obtained by either the solution of the Xi transport
equation or from an algebraic expression. Both approaches are
based on Gulder's flame speed correlation which has been shown
to be appropriate by comparison with the results from the
spectral model.
Strain effects are encorporated directly into the Xi equation
but not in the algebraic approximation. Further work need to be
done on this issue, particularly regarding the enhanced removal rate
caused by flame compression. Analysis using results of the spectral
model will be required.
For cases involving very lean Propane flames or other flames which are
very strain-sensitive, a transport equation for the laminar flame
speed is present. This equation is derived using heuristic arguments
involving the strain time scale and the strain-rate at extinction.
the transport velocity is the same as that for the Xi equation.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, chemical reactions,
combustion, Lagrangian particles, radiation, surface film etc. and
constraining or limiting the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
XiFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
47 lines
1.2 KiB
Bash
Executable File
47 lines
1.2 KiB
Bash
Executable File
#!/bin/sh
|
|
cd ${0%/*} || exit 1 # Run from this directory
|
|
|
|
# Source tutorial run functions
|
|
. $WM_PROJECT_DIR/bin/tools/RunFunctions
|
|
|
|
# Clone the propane case and set it up for hydrogen
|
|
cloneCase moriyoshiHomogeneous moriyoshiHomogeneousHydrogen
|
|
(
|
|
cd moriyoshiHomogeneousHydrogen || exit 1
|
|
|
|
mv constant/physicalProperties \
|
|
constant/physicalProperties.propane
|
|
mv constant/physicalProperties.hydrogen \
|
|
constant/physicalProperties
|
|
|
|
mv constant/combustionPropertiesInclude \
|
|
constant/combustionPropertiesInclude.propane
|
|
mv constant/combustionPropertiesInclude.hydrogen \
|
|
constant/combustionPropertiesInclude
|
|
)
|
|
|
|
# Run the propane case
|
|
(
|
|
cd moriyoshiHomogeneous || exit 1
|
|
|
|
foamRunTutorials
|
|
|
|
if ! isTest $@
|
|
then
|
|
runApplication -a foamDictionary system/controlDict -entry deltaT -set 1e-05
|
|
runApplication -a foamDictionary system/controlDict -entry endTime -set 0.015
|
|
runApplication -a foamDictionary system/controlDict -entry writeInterval -set 50
|
|
|
|
runApplication -a XiFoam
|
|
fi
|
|
)
|
|
|
|
# Run the hydrogen case
|
|
(
|
|
cd moriyoshiHomogeneousHydrogen || exit 1
|
|
|
|
foamRunTutorials
|
|
)
|
|
|
|
#------------------------------------------------------------------------------
|