Will Bainbridge a95c904390 tutorials/propeller: Mesh AMI-s as a face-zone, rather than patches ...

snappyHexMesh now generates a face-zone for the AMI-s, and createBaffles
and mergeOrSplitPoints -split are used to create the patches. Before,
snappy generated AMI patches directly, which were then converted to
AMI-s with createPatch.

This way, the AMI-s match exactly at the start of the simulation. For
more complicated cases that may be derived from this tutorial, this
could be important.

2018-08-07 13:12:53 +01:00

..

blob.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

bullet.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

cyclone.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

DTC-scaled.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

flange.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

membrane-boundaries.stl.gz

semiPermeableBaffle: Added two new boundary conditions and a tutorial

2017-10-19 11:51:38 +01:00

membrane-membrane.stl.gz

semiPermeableBaffle: Added two new boundary conditions and a tutorial

2017-10-19 11:51:38 +01:00

motorBike.obj.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

propeller.obj.gz

tutorials/propeller: Mesh AMI-s as a face-zone, rather than patches

2018-08-07 13:12:53 +01:00

wigley-scaled-oriented.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00

wigley.stl.gz

Add the OpenFOAM source tree

2014-12-10 22:40:10 +00:00