OpenFOAM-12/tutorials/multiRegion/CHT/multiphaseCoolingCylinder2D/system/blockMeshDict

/*--------------------------------*- C++ -*----------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     | Website:  https://openfoam.org
    \\  /    A nd           | Version:  dev
     \\/     M anipulation  |
\*---------------------------------------------------------------------------*/
FoamFile
{
    format      ascii;
    class       dictionary;
    object      blockMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

convertToMeters         1;

cylinderRadius      0.005; // Radius of the cylinder
cylinderCore        0.002; // Radius of the core block inside the cylinder
halfWidth            0.04; // Half the channel width
halfThickness      0.0025; // Half the domain thickness
xDownstream           0.1; // X-coordinate of the downstream outlet

cylinderRadialCells    12; // Cells across the radius of the non-core part of the cylinder
cylinderCoreCells      15; // Cells across the core block inside the cylinder
widthCells             30; // Cells across the domain width
downstreamCells        20; // Cells across the downstream region

radialGrading          20; // Expansion ratio outside the cylinder in a radial direction

geometry
{
    cylinder
    {
        type   searchableCylinder;
        point1 (0 0 -100);
        point2 (0 0 100);
        radius $cylinderRadius;
    }
}

vertices
(
    project (#neg $cylinderCore #neg $cylinderCore #neg $halfThickness) (cylinder)
    project (     $cylinderCore #neg $cylinderCore #neg $halfThickness) (cylinder)
    project (#neg $cylinderCore #neg $cylinderCore      $halfThickness) (cylinder)
    project (     $cylinderCore #neg $cylinderCore      $halfThickness) (cylinder)

    project (#neg $cylinderCore      $cylinderCore #neg $halfThickness) (cylinder)
    project (     $cylinderCore      $cylinderCore #neg $halfThickness) (cylinder)
    project (#neg $cylinderCore      $cylinderCore      $halfThickness) (cylinder)
    project (     $cylinderCore      $cylinderCore      $halfThickness) (cylinder)

    (#neg $halfWidth #neg $halfWidth #neg $halfThickness)
    (     $halfWidth #neg $halfWidth #neg $halfThickness)
    (#neg $halfWidth #neg $halfWidth      $halfThickness)
    (     $halfWidth #neg $halfWidth      $halfThickness)

    (#neg $halfWidth      $halfWidth #neg $halfThickness)
    (     $halfWidth      $halfWidth #neg $halfThickness)
    (#neg $halfWidth      $halfWidth      $halfThickness)
    (     $halfWidth      $halfWidth      $halfThickness)

    ($xDownstream #neg $halfWidth #neg $halfThickness)
    ($xDownstream #neg $halfWidth      $halfThickness)
    ($xDownstream      $halfWidth #neg $halfThickness)
    ($xDownstream      $halfWidth      $halfThickness)

    (#neg $cylinderCore #neg $cylinderCore #neg $halfThickness)
    (     $cylinderCore #neg $cylinderCore #neg $halfThickness)
    (     $cylinderCore #neg $cylinderCore      $halfThickness)
    (#neg $cylinderCore #neg $cylinderCore      $halfThickness)

    (#neg $cylinderCore      $cylinderCore #neg $halfThickness)
    (     $cylinderCore      $cylinderCore #neg $halfThickness)
    (     $cylinderCore      $cylinderCore      $halfThickness)
    (#neg $cylinderCore      $cylinderCore      $halfThickness)
);

graded simpleGrading (1 $radialGrading 1);
uniform simpleGrading (1 1 1);

blocks
(
    hex (4 6 14 12 0 2 10 8) fluid (1 $widthCells $cylinderCoreCells) $graded
    hex (7 5 13 15 3 1 9 11) fluid (1 $widthCells $cylinderCoreCells) $graded
    hex (2 3 11 10 0 1 9 8) fluid ($cylinderCoreCells $widthCells 1) $graded
    hex (7 6 14 15 5 4 12 13) fluid ($cylinderCoreCells $widthCells 1) $graded
    hex (13 18 19 15 9 16 17 11) fluid ($downstreamCells 1 $cylinderCoreCells) $uniform

    hex (24 25 26 27 20 21 22 23) solid ($cylinderCoreCells 1 $cylinderCoreCells) $uniform
    hex (0 2 23 20 4 6 27 24) solid (1 $cylinderRadialCells $cylinderCoreCells) $uniform
    hex (21 22 3 1 25 26 7 5) solid (1 $cylinderRadialCells $cylinderCoreCells) $uniform
    hex (0 2 3 1 20 23 22 21) solid (1 $cylinderCoreCells $cylinderRadialCells) $uniform
    hex (4 5 7 6 24 25 26 27) solid ($cylinderCoreCells 1 $cylinderRadialCells) $uniform
);

edges
(
    project 0 2 (cylinder)
    project 2 3 (cylinder)
    project 3 1 (cylinder)
    project 1 0 (cylinder)
    project 4 6 (cylinder)
    project 6 7 (cylinder)
    project 7 5 (cylinder)
    project 5 4 (cylinder)
    project 0 4 (cylinder)
    project 2 6 (cylinder)
    project 3 7 (cylinder)
    project 1 5 (cylinder)
);

faces
(
);

defaultPatch
{
    name    frontAndBack;
    type    empty;
}

boundary
(
    inlet
    {
        type patch;
        faces
        (
            (8 10 14 12)
        );
    }

    outlet
    {
        type patch;
        faces
        (
            (16 17 19 18)
        );
    }

    topAndBottom
    {
        type patch;
        faces
        (
            (8 9 11 10)
            (12 13 15 14)
            (9 16 17 11)
            (13 18 19 15)
        );
    }
);


// ************************************************************************* //