f93300ee11
This utility now always creates two patches, and only creates duplicate
faces when they connect to different cells and point in opposite
directions. Now that ACMI has been removed, there is no need to create
duplicate faces on the same cell and with similar orientations. This is
unituitive and is now considered an invalid mesh topology.
The preferred syntax for createBaffles is now as follows:
internalFacesOnly true;
baffles
{
cyclics
{
type faceZone;
zoneName cyclicFaces;
owner
{
name cyclicLeft;
type cyclic;
neighbourPatch cyclicRight;
}
neighbour
{
name cyclicRight;
type cyclic;
neighbourPatch cyclicLeft;
}
}
}
Note that the 'patches' sub-dictionary is not needed any more; the
'owner' and 'neighbour' sub-dictionaries can be in the same dictionary
as the parameters with which faces are selected. For backwards
compatibility, however, a 'patches' sub-dictionary is still permitted,
as are keywords 'master' and 'slave' (in place of 'owner' and
'neighbour', respectively).
The 'patchPairs' syntax has been removed. Whilst consise, this syntax
made a number of assumptions and decisions regarding naming conventions
that were not sufficiently intuitive for the user to understand without
extensive reference to the code. If identical boundaries are desired on
both sides of the patch, dictionary substitution provides a more
intuitive way of minimising the amount of specifiection required. For
example, to create two back-to-back walls, the following specification
could be used:
internalFacesOnly true;
fields true;
baffles
{
walls
{
type faceZone;
zoneName wallFaces;
owner
{
name baffleWallLeft;
type wall;
patchFields
{
p
{
type zeroGradient;
}
U
{
type noSlip;
}
}
}
neighbour
{
name baffleWallRight;
$owner; // <-- Use the same settings as for the owner
}
}
}
OpenFOAM Configuration
The main OpenFOAM settings are located in the parent etc/ directory. The bash and csh shells are supported and to configure OpenFOAM source etc/bashrc or etc/cshrc respectively which source the following files in the config.sh or config.csh respectively:
settings: core settingsaliases: aliases for interactive shellsunset: sourced to clear as many OpenFOAM environment settings as possiblempi: MPI communications library settingsensight: application settings for EnSightparaview: application settings for ParaViewscotch: application settings for compiling against scotchmetis: application settings for compiling against metis 5
The config.*/example directories contains various example configuration files for the corresponding shell:
compiler: an example of fine tuning ThirdParty compiler settingsopenmpi: an example of fine tuning openmpi settings for OpenFOAMparaview: an example of chaining to the standard config/paraview with a different ParaView_VERSIONprefs: an example of supplying alternative site-defined settings