The files relating to the hex refinement are written out explicitly both by
snappyHexMesh and dynamicRefineFvMesh and hence should be set "NO_WRITE" rather
than "AUTO_WRITE" to avoid writing them twice. This change corrects the
handling of the "refinementHistory" file which should not be written by
snappyHexMesh.
Avoids slight phase-fraction unboundedness at entertainment BCs and improved
robustness.
Additionally the phase-fractions in the multi-phase (rather than two-phase)
solvers are adjusted to avoid the slow growth of inconsistency ("drift") caused
by solving for all of the phase-fractions rather than deriving one from the
others.
e.g.
fieldMinMax fieldMinMax write:
min(T) = 291 in cell 255535 at location (-0.262546 -0.538933 1.00574) on processor 9
max(T) = 336.298 in cell 419031 at location (1.7468 0.758405 8.10989) on processor 1
min(mag(U)) = 0 in cell 14990 at location (-0.0824383 1.68479 1.5349) on processor 0
max(mag(U)) = 652.341 in cell 218284 at location (0.609849 0.167247 1.00091) on processor 12
New reactingFoam tutorial counterFlowFlame2DLTS_GRI_TDAC demonstrates this new
functionality.
Additionally the ISAT table growth algorithm has been further optimized
providing an overall speedup of between 15% and 38% for the tests run so far.
Updates to TDAC and ISAT provided by Francesco Contino.
Implementation updated and integrated into OpenFOAM-dev by
Henry G. Weller, CFD Direct Ltd with the help of Francesco Contino.
Original code providing all algorithms for chemistry reduction and
tabulation contributed by Francesco Contino, Tommaso Lucchini, Gianluca
D’Errico, Hervé Jeanmart, Nicolas Bourgeois and Stéphane Backaert.
e.g. in tutorials/heatTransfer/buoyantSimpleFoam/externalCoupledCavity/0/T
hot
{
type externalCoupledTemperature;
commsDir "${FOAM_CASE}/comms";
file "data";
initByExternal yes;
log true;
value uniform 307.75; // 34.6 degC
}
Previously both 'file' and 'fileName' were used inconsistently in different
classes and given that there is no confusion or ambiguity introduced by using
the simpler 'file' rather than 'fileName' this change simplifies the use and
maintenance of OpenFOAM.
e.g.
motorBike
{
type triSurfaceMesh;
file "motorBike.obj";
}
Based on patch provided by Mattijs Janssens
Resolves part of bug-report https://bugs.openfoam.org/view.php?id=2396
Combined 'dQ()' and 'Sh()' into 'Qdot()' which returns the heat-release rate in
the normal units [kg/m/s3] and used as the heat release rate source term in
the energy equations, to set the field 'Qdot' in several combustion solvers
and for the evaluation of the local time-step when running LTS.
defined by functionObjects, e.g. wallHeatFlux, wallShearStress and yPlus.
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2353
which provided warning about backward-compatibility issue with setting div
schemes for steady-state. It caused confusion by generating incorrect warning
messages for compressible cases for which the 'bounded' should NOT be applied to
the 'div(phid,p)'.
e.g. the motion of two counter-rotating AMI regions could be defined:
dynamicFvMesh dynamicMotionSolverListFvMesh;
solvers
(
rotor1
{
solver solidBody;
cellZone rotor1;
solidBodyMotionFunction rotatingMotion;
rotatingMotionCoeffs
{
origin (0 0 0);
axis (0 0 1);
omega 6.2832; // rad/s
}
}
rotor2
{
solver solidBody;
cellZone rotor2;
solidBodyMotionFunction rotatingMotion;
rotatingMotionCoeffs
{
origin (0 0 0);
axis (0 0 1);
omega -6.2832; // rad/s
}
}
);
Any combination of motion solvers may be selected but there is no special
handling of motion interaction; the motions are applied sequentially and
potentially cumulatively.
To support this new general framework the solidBodyMotionFvMesh and
multiSolidBodyMotionFvMesh dynamicFvMeshes have been converted into the
corresponding motionSolvers solidBody and multiSolidBody and the tutorials
updated to reflect this change e.g. the motion in the mixerVesselAMI2D tutorial
is now defined thus:
dynamicFvMesh dynamicMotionSolverFvMesh;
solver solidBody;
solidBodyCoeffs
{
cellZone rotor;
solidBodyMotionFunction rotatingMotion;
rotatingMotionCoeffs
{
origin (0 0 0);
axis (0 0 1);
omega 6.2832; // rad/s
}
}
to avoid duplicate instantiation of the thermodynamics package.
The 'zoneCombustion' model is now selected in constant/combustionProperties by
either
combustionModel zoneCombustion<psiCombustionModel>;
or
combustionModel zoneCombustion<rhoCombustionModel>;
as appropriate.
Resolves bug-report http://bugs.openfoam.org/view.php?id=2354
