chtMultiRegionFoam: Simplified snappyMultiRegionHeater tutorial

The tutorial now also demonstrates how to run a multi-region CHT case
completely in parallel. If run-time post processing was being utilised
there would be no need for reconstruction at any point.

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/T

@@ -0,0 +1,41 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/bottomAir";
+    object      T;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 0 0 1 0 0 0 ];
+
+internalField   uniform 300;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        value           $internalField;
+        Tnbr            T;
+        kappaMethod     fluidThermo;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/U

@@ -10,6 +10,7 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volVectorField;
+    location    "0/bottomAir";
     object      U;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
@@ -20,11 +21,13 @@ internalField   uniform (0.01 0 0);
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
-        type            calculated;
+        type            noSlip;
-        value           uniform (0.01 0 0);
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/alphat

@@ -10,21 +10,25 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
-    object      T;
+    location    "0/bottomAir";
+    object      alphat;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
-dimensions      [0 0 0 1 0 0 0];
+dimensions      [1 -1 -1 0 0 0 0];
 
-internalField   uniform 300;
+internalField   uniform 0;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type            calculated;
-        value           uniform 300;
+        value           $internalField;
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/epsilon

@@ -10,6 +10,7 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
+    location    "0/bottomAir";
     object      epsilon;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
@@ -20,10 +21,12 @@ internalField   uniform 0.01;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
-        type            calculated;
+        type            epsilonWallFunction;
-        value           uniform 0.01;
+        value           $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/k

@@ -10,6 +10,7 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
+    location    "0/bottomAir";
     object      k;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
@@ -20,10 +21,12 @@ internalField   uniform 0.1;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
-        type            calculated;
+        type            kqRWallFunction;
-        value           uniform 0.1;
+        value           $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/p

@@ -0,0 +1,34 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/bottomAir";
+    object      p;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 1 -1 -2 0 0 0 0 ];
+
+internalField   uniform 100000;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    ".*"
+    {
+        type            calculated;
+        value           $internalField;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/bottomAir/p_rgh

@@ -10,21 +10,25 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
+    location    "0/bottomAir";
     object      p_rgh;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 dimensions      [ 1 -1 -2 0 0 0 0 ];
 
-internalField   uniform 1e5;
+internalField   uniform 100000;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
-        type            calculated;
+        type            fixedFluxPressure;
-        value           uniform 1e5;
+        value           $internalField;
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/heater/T

@@ -0,0 +1,41 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/heater";
+    object      T;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 0 0 1 0 0 0 ];
+
+internalField   uniform 300;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            fixedValue;
+        value           uniform 500;
+    }
+    ".*_to_.*"
+    {
+        type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        value           $internalField;
+        Tnbr            T;
+        kappaMethod     solidThermo;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/heater/p

@@ -0,0 +1,39 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/heater";
+    object      p;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [1 -1 -2 0 0 0 0];
+
+internalField   uniform 100000;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            calculated;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            calculated;
+        value           uniform 0;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/leftSolid/T

@@ -0,0 +1,41 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/leftSolid";
+    object      T;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 0 0 1 0 0 0 ];
+
+internalField   uniform 300;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        value           $internalField;
+        Tnbr            T;
+        kappaMethod     solidThermo;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/leftSolid/p

@@ -0,0 +1,39 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/leftSolid";
+    object      p;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [1 -1 -2 0 0 0 0];
+
+internalField   uniform 100000;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            calculated;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            calculated;
+        value           uniform 0;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/rho

@@ -1,30 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       volScalarField;
-    object      rho;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-dimensions      [1 -3 0 0 0 0 0];
-
-internalField   uniform 8000;
-
-boundaryField
-{
-    ".*"
-    {
-        type            calculated;
-        value           uniform 8000;
-    }
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/rightSolid/T

@@ -0,0 +1,41 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/rightSolid";
+    object      T;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 0 0 1 0 0 0 ];
+
+internalField   uniform 300;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        value           $internalField;
+        Tnbr            T;
+        kappaMethod     solidThermo;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/rightSolid/p

@@ -0,0 +1,39 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/rightSolid";
+    object      p;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [1 -1 -2 0 0 0 0];
+
+internalField   uniform 100000;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    "(min|max)(X|Y|Z)"
+    {
+        type            calculated;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            calculated;
+        value           uniform 0;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/T

@@ -0,0 +1,62 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/topAir";
+    object      T;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 0 0 1 0 0 0 ];
+
+internalField   uniform 300;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    maxY
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    minX
+    {
+        type            fixedValue;
+        value           $internalField;
+    }
+    maxX
+    {
+        type            inletOutlet;
+        value           $internalField;
+        inletValue      $internalField;
+    }
+    minZ
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    maxZ
+    {
+        type            zeroGradient;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        value           $internalField;
+        Tnbr            T;
+        kappaMethod     fluidThermo;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/U

@@ -9,42 +9,47 @@ FoamFile
 {
     version     2.0;
     format      ascii;
-    class       dictionary;
+    class       volVectorField;
-    object      changeDictionaryDict;
+    location    "0/topAir";
+    object      U;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
-boundary
+dimensions      [ 0 1 -1 0 0 0 0 ];
-{
-    minZ
-    {
-        type            patch;
-    }
-    maxZ
-    {
-        type            patch;
-    }
-}
 
-T
+internalField   uniform (0.1 0 0);
-{
-    internalField   uniform 300;
 
 boundaryField
 {
-        ".*"
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    maxY
     {
-            type            zeroGradient;
+        type            noSlip;
-            value           uniform 300;
     }
-        "leftSolid_to_.*"
+    minX
     {
-            type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        type            fixedValue;
-            Tnbr            T;
+        value           $internalField;
-            kappaMethod     solidThermo;
-            value           uniform 300;
     }
+    maxX
+    {
+        type            pressureInletOutletVelocity;
+        value           $internalField;
+    }
+    minZ
+    {
+        type            noSlip;
+    }
+    maxZ
+    {
+        type            noSlip;
+    }
+    ".*_to_.*"
+    {
+        type            noSlip;
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/alphat

@@ -10,6 +10,7 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
+    location    "0/topAir";
     object      alphat;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
@@ -20,10 +21,12 @@ internalField   uniform 0;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type            calculated;
-        value           uniform 0;
+        value           $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/epsilon

@@ -0,0 +1,60 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/topAir";
+    object      epsilon;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 2 -3 0 0 0 0 ];
+
+internalField   uniform 0.01;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    maxY
+    {
+        type            epsilonWallFunction;
+        value           $internalField;
+    }
+    minX
+    {
+        type            fixedValue;
+        value           $internalField;
+    }
+    maxX
+    {
+        type            inletOutlet;
+        value           $internalField;
+        inletValue      $internalField;
+    }
+    minZ
+    {
+        type            epsilonWallFunction;
+        value           $internalField;
+    }
+    maxZ
+    {
+        type            epsilonWallFunction;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            epsilonWallFunction;
+        value           $internalField;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/k

@@ -0,0 +1,60 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       volScalarField;
+    location    "0/topAir";
+    object      k;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+dimensions      [ 0 2 -2 0 0 0 0 ];
+
+internalField   uniform 0.1;
+
+boundaryField
+{
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    maxY
+    {
+        type            kqRWallFunction;
+        value           $internalField;
+    }
+    minX
+    {
+        type            fixedValue;
+        value           $internalField;
+    }
+    maxX
+    {
+        type            inletOutlet;
+        value           $internalField;
+        inletValue      $internalField;
+    }
+    minZ
+    {
+        type            kqRWallFunction;
+        value           $internalField;
+    }
+    maxZ
+    {
+        type            kqRWallFunction;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            kqRWallFunction;
+        value           $internalField;
+    }
+}
+
+
+// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/p

@@ -10,21 +10,25 @@ FoamFile
     version     2.0;
     format      ascii;
     class       volScalarField;
+    location    "0/topAir";
     object      p;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 dimensions      [ 1 -1 -2 0 0 0 0 ];
 
-internalField   uniform 1e5;
+internalField   uniform 100000;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type            calculated;
-        value           uniform 1e5;
+        value           $internalField;
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0/topAir/p_rgh

@@ -9,51 +9,51 @@ FoamFile
 {
     version     2.0;
     format      ascii;
-    class       dictionary;
+    class       volScalarField;
-    object      changeDictionaryDict;
+    location    "0/topAir";
+    object      p_rgh;
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
-boundary
+dimensions      [ 1 -1 -2 0 0 0 0 ];
-{
-    minY
-    {
-        type            patch;
-    }
-    minZ
-    {
-        type            patch;
-    }
-    maxZ
-    {
-        type            patch;
-    }
-}
 
-T
+internalField   uniform 100000;
-{
-    internalField   uniform 300;
 
 boundaryField
 {
-        ".*"
+    #includeEtc "caseDicts/setConstraintTypes"
+
+    maxY
     {
-            type            zeroGradient;
+        type            fixedFluxPressure;
-            value           uniform 300;
+        value           $internalField;
     }
-        "heater_to_.*"
+    minX
     {
-            type            compressible::turbulentTemperatureCoupledBaffleMixed;
+        type            fixedFluxPressure;
-            Tnbr            T;
+        value           $internalField;
-            kappaMethod     solidThermo;
-            value           uniform 300;
     }
-        minY
+    maxX
     {
         type            fixedValue;
-            value           uniform 500;
+        value           $internalField;
     }
+    minZ
+    {
+        type            fixedFluxPressure;
+        value           $internalField;
+    }
+    maxZ
+    {
+        type            fixedFluxPressure;
+        value           $internalField;
+    }
+    ".*_to_.*"
+    {
+        type            fixedFluxPressure;
+        value           $internalField;
     }
 }
 
+
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allclean

@@ -4,23 +4,10 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Source tutorial clean functions
 . $WM_PROJECT_DIR/bin/tools/CleanFunctions
 
-rm -rf constant/extendedFeatureEdgeMesh > /dev/null 2>&1
-rm -f constant/triSurface/*.eMesh > /dev/null 2>&1
-rm -f constant/polyMesh/boundary
-
 cleanCase
-rm -rf VTK
+rm -rf \
-rm -rf constant/cellToRegion constant/polyMesh/sets
+    constant/*/polyMesh \
-rm -rf 0/bottomAir
+    constant/extendedFeatureEdgeMesh \
-rm -rf 0/topAir
+    constant/triSurface/*.eMesh
-rm -rf 0/heater
-rm -rf 0/leftSolid
-rm -rf 0/rightSolid
-rm -f 0/cellToRegion
-rm -rf constant/bottomAir/polyMesh
-rm -rf constant/topAir/polyMesh
-rm -rf constant/heater/polyMesh
-rm -rf constant/leftSolid/polyMesh
-rm -rf constant/rightSolid/polyMesh
 
 #------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun

@@ -1,48 +1,27 @@
 #!/bin/sh
 cd ${0%/*} || exit 1 # Run from this directory
 
-
 # Source tutorial run functions
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
-rm -rf constant/polyMesh/sets
+# Meshing
-
 runApplication blockMesh
 runApplication surfaceFeatures
+runApplication decomposePar -copyZero
+runParallel snappyHexMesh -overwrite
+runParallel splitMeshRegions -cellZones -overwrite
 
-runApplication snappyHexMesh -overwrite
+# Simulation
-runApplication splitMeshRegions -cellZones -overwrite
+runParallel $(getApplication)
 
-# remove fluid fields from solid regions (important for post-processing)
+# Reconstruct
-for i in heater leftSolid rightSolid
+for region in bottomAir topAir heater leftSolid rightSolid
 do
-   rm -f 0*/$i/{nut,alphat,epsilon,k,U,p_rgh}
+    runApplication -s $region reconstructParMesh -constant -region $region
 done
+reconstructPar -allRegions
 
-
+# Post-process
-for i in bottomAir topAir heater leftSolid rightSolid
-do
-   runApplication -s $i  changeDictionary -region $i
-done
-
-
-#-- Run on single processor
-runApplication $(getApplication)
-
-
-## Decompose
-#runApplication decomposePar -allRegions
-#
-## Run
-#runParallel $(getApplication)
-#
-## Reconstruct
-#runApplication reconstructPar -allRegions
-
-
-echo
-echo "creating files for paraview post-processing"
-echo
 paraFoam -touchAll
 
 #------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/changeDictionaryDict

@@ -1,122 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      changeDictionaryDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-boundary
-{
-    minX
-    {
-        type            wall;
-    }
-    maxX
-    {
-        type            wall;
-    }
-}
-
-U
-{
-    internalField   uniform (0.01 0 0);
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            fixedValue;
-            value           uniform (0 0 0);
-        }
-    }
-}
-
-T
-{
-    internalField   uniform 300;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            zeroGradient;
-        }
-
-        "bottomAir_to_.*"
-        {
-            type            compressible::turbulentTemperatureCoupledBaffleMixed;
-            Tnbr            T;
-            kappaMethod     fluidThermo;
-            value           uniform 300;
-        }
-    }
-}
-
-epsilon
-{
-    // Set the value on all bc to non-zero. Not used in simulation
-    // since zeroGradient; only used in initialisation.
-    internalField   uniform 0.01;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            epsilonWallFunction;
-            value           uniform 0.01;
-        }
-    }
-}
-
-k
-{
-    internalField   uniform 0.1;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            kqRWallFunction;
-            value           uniform 0.1;
-        }
-    }
-}
-
-p_rgh
-{
-    internalField   uniform 1e5;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            fixedFluxPressure;
-            value           uniform 1e5;
-        }
-    }
-}
-
-p
-{
-    internalField   uniform 1e5;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            calculated;
-            value           uniform 1e5;
-        }
-    }
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/decomposeParDict

@@ -1,72 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    note        "mesh decomposition control dictionary";
-    location    "system";
-    object      decomposeParDict;
-}
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
-
-hierarchicalCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-    order       xyz;
-}
-
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/decomposeParDict

@@ -19,19 +19,7 @@ FoamFile
 
 numberOfSubdomains  4;
 
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-// method          scotch;
 method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
 
 hierarchicalCoeffs
 {
@@ -40,33 +28,5 @@ hierarchicalCoeffs
     order       xyz;
 }
 
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
 
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/decomposeParDict

@@ -1,72 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    note        "mesh decomposition control dictionary";
-    location    "system";
-    object      decomposeParDict;
-}
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
-
-hierarchicalCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-    order       xyz;
-}
-
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/decomposeParDict

@@ -1,72 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    note        "mesh decomposition control dictionary";
-    location    "system";
-    object      decomposeParDict;
-}
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
-
-hierarchicalCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-    order       xyz;
-}
-
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/fvSolution

@@ -1,40 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      fvSolution;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-solvers
-{
-    h
-    {
-        solver           PCG;
-        preconditioner   DIC;
-        tolerance        1e-06;
-        relTol           0.1;
-    }
-
-    hFinal
-    {
-        $h;
-        tolerance        1e-06;
-        relTol           0;
-    }
-}
-
-PIMPLE
-{
-    nNonOrthogonalCorrectors 0;
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/fvSolution

@@ -0,0 +1 @@
+../heater/fvSolution

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/meshQualityDict

@@ -14,7 +14,6 @@ FoamFile
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
-// Include defaults parameters from master dictionary
 #includeEtc "caseDicts/meshQualityDict"
 
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/changeDictionaryDict

@@ -1,50 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      changeDictionaryDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-boundary
-{
-    minZ
-    {
-        type            patch;
-    }
-    maxZ
-    {
-        type            patch;
-    }
-}
-
-T
-{
-    internalField   uniform 300;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            zeroGradient;
-            value           uniform 300;
-        }
-        "rightSolid_to_.*"
-        {
-            type            compressible::turbulentTemperatureCoupledBaffleMixed;
-            Tnbr            T;
-            kappaMethod     solidThermo;
-            value           uniform 300;
-        }
-    }
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/decomposeParDict

@@ -1,72 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    note        "mesh decomposition control dictionary";
-    location    "system";
-    object      decomposeParDict;
-}
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
-
-hierarchicalCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-    order       xyz;
-}
-
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/fvSolution

@@ -1,40 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      fvSolution;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-solvers
-{
-    h
-    {
-        solver           PCG;
-        preconditioner   DIC;
-        tolerance        1e-06;
-        relTol           0.1;
-    }
-
-    hFinal
-    {
-        $h;
-        tolerance        1e-06;
-        relTol           0;
-    }
-}
-
-PIMPLE
-{
-    nNonOrthogonalCorrectors 0;
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/fvSolution

@@ -0,0 +1 @@
+../heater/fvSolution

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/changeDictionaryDict

@@ -1,167 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      changeDictionaryDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-U
-{
-    internalField   uniform (0.1 0 0);
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            fixedValue;
-            value           uniform (0 0 0);
-        }
-        minX
-        {
-            type            fixedValue;
-            value           uniform (0.1 0 0);
-        }
-        maxX
-        {
-            type            inletOutlet;
-            inletValue      uniform (0 0 0);
-            value           uniform (0.1 0 0);
-        }
-    }
-}
-
-T
-{
-    internalField   uniform 300;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            zeroGradient;
-        }
-
-        minX
-        {
-            type            fixedValue;
-            value           uniform 300;
-        }
-        maxX
-        {
-            type            inletOutlet;
-            inletValue      uniform 300;
-            value           uniform 300;
-        }
-
-        "topAir_to_.*"
-        {
-            type            compressible::turbulentTemperatureCoupledBaffleMixed;
-            Tnbr            T;
-            kappaMethod     fluidThermo;
-            value           uniform 300;
-        }
-    }
-}
-
-epsilon
-{
-    internalField   uniform 0.01;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            epsilonWallFunction;
-            value           uniform 0.01;
-        }
-
-        minX
-        {
-            type            fixedValue;
-            value           uniform 0.01;
-        }
-        maxX
-        {
-            type            inletOutlet;
-            inletValue      uniform 0.01;
-            value           uniform 0.01;
-        }
-    }
-}
-
-k
-{
-    internalField   uniform 0.1;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            kqRWallFunction;
-            value           uniform 0.1;
-        }
-
-        minX
-        {
-            type            fixedValue;
-            value           uniform 0.1;
-        }
-        maxX
-        {
-            type            inletOutlet;
-            inletValue      uniform 0.1;
-            value           uniform 0.1;
-        }
-    }
-}
-
-p_rgh
-{
-    internalField   uniform 1e5;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            fixedFluxPressure;
-            value           uniform 1e5;
-        }
-
-        maxX
-        {
-            type            fixedValue;
-            value           uniform 1e5;
-        }
-    }
-}
-
-p
-{
-    internalField   uniform 1e5;
-
-    boundaryField
-    {
-        ".*"
-        {
-            type            calculated;
-            value           uniform 1e5;
-        }
-
-        maxX
-        {
-            type            calculated;
-            value           uniform 1e5;
-        }
-    }
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/decomposeParDict

@@ -1,72 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    note        "mesh decomposition control dictionary";
-    location    "system";
-    object      decomposeParDict;
-}
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-simpleCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-}
-
-hierarchicalCoeffs
-{
-    n           (2 2 1);
-    delta       0.001;
-    order       xyz;
-}
-
-scotchCoeffs
-{
-    // processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    // writeGraph  true;
-    // strategy "b";
-}
-
-manualCoeffs
-{
-    dataFile    "decompositionData";
-}
-
-
-//// Is the case distributed
-//distributed     yes;
-//// Per slave (so nProcs-1 entries) the directory above the case.
-//roots
-//(
-//    "/tmp"
-//    "/tmp"
-//);
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/fvSolution

@@ -1,76 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      fvSolution;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-solvers
-{
-    "(rho|rhoFinal)"
-    {
-        solver          PCG
-        preconditioner  DIC;
-        tolerance       1e-7;
-        relTol          0;
-    }
-
-    p_rgh
-    {
-        solver           GAMG;
-        tolerance        1e-7;
-        relTol           0.01;
-
-        smoother         GaussSeidel;
-
-    }
-
-    p_rghFinal
-    {
-        $p_rgh;
-        tolerance        1e-7;
-        relTol           0;
-    }
-
-    "(U|h|k|epsilon|R)"
-    {
-        solver           PBiCGStab;
-        preconditioner   DILU;
-        tolerance        1e-7;
-        relTol           0.1;
-    }
-
-    "(U|h|k|epsilon|R)Final"
-    {
-        $U;
-        tolerance        1e-07;
-        relTol           0;
-    }
-}
-
-PIMPLE
-{
-    momentumPredictor   yes;
-    nCorrectors         2;
-    nNonOrthogonalCorrectors 0;
-}
-
-relaxationFactors
-{
-    equations
-    {
-        "h.*"           1;
-        "U.*"           1;
-    }
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/fvSolution

@@ -0,0 +1 @@
+../bottomAir/fvSolution