The previous time-step compression flux is not valid/accurate on the new mesh
and it is better to re-calculate it rather than map it from the previous mesh to
the new mesh.
By default snappyHexMesh writes files relating to the hex-splitting process into
the polyMesh directory: cellLevel level0Edge pointLevel surfaceIndex
but by setting the noRefinement flag:
writeFlags
(
noRefinement
.
.
.
);
these optional files which are generally not needed are not written.
If you run the three stages of snappyHexMesh separately or run a dynamic mesh
solver supporting refinement and unrefinement these files are needed
and "noRefinement" should not be set.
unless the blockMeshDict is in the polyMesh directory or the "-noClean" option
is specified.
This avoids problems running snappyHexMesh without first clearing files from
polyMesh which interfere with the operation of snappyHexMesh.
The files relating to the hex refinement are written out explicitly both by
snappyHexMesh and dynamicRefineFvMesh and hence should be set "NO_WRITE" rather
than "AUTO_WRITE" to avoid writing them twice. This change corrects the
handling of the "refinementHistory" file which should not be written by
snappyHexMesh.
Avoids slight phase-fraction unboundedness at entertainment BCs and improved
robustness.
Additionally the phase-fractions in the multi-phase (rather than two-phase)
solvers are adjusted to avoid the slow growth of inconsistency ("drift") caused
by solving for all of the phase-fractions rather than deriving one from the
others.
e.g.
fieldMinMax fieldMinMax write:
min(T) = 291 in cell 255535 at location (-0.262546 -0.538933 1.00574) on processor 9
max(T) = 336.298 in cell 419031 at location (1.7468 0.758405 8.10989) on processor 1
min(mag(U)) = 0 in cell 14990 at location (-0.0824383 1.68479 1.5349) on processor 0
max(mag(U)) = 652.341 in cell 218284 at location (0.609849 0.167247 1.00091) on processor 12
New reactingFoam tutorial counterFlowFlame2DLTS_GRI_TDAC demonstrates this new
functionality.
Additionally the ISAT table growth algorithm has been further optimized
providing an overall speedup of between 15% and 38% for the tests run so far.
Updates to TDAC and ISAT provided by Francesco Contino.
Implementation updated and integrated into OpenFOAM-dev by
Henry G. Weller, CFD Direct Ltd with the help of Francesco Contino.
Original code providing all algorithms for chemistry reduction and
tabulation contributed by Francesco Contino, Tommaso Lucchini, Gianluca
D’Errico, Hervé Jeanmart, Nicolas Bourgeois and Stéphane Backaert.
e.g. in tutorials/heatTransfer/buoyantSimpleFoam/externalCoupledCavity/0/T
hot
{
type externalCoupledTemperature;
commsDir "${FOAM_CASE}/comms";
file "data";
initByExternal yes;
log true;
value uniform 307.75; // 34.6 degC
}
Previously both 'file' and 'fileName' were used inconsistently in different
classes and given that there is no confusion or ambiguity introduced by using
the simpler 'file' rather than 'fileName' this change simplifies the use and
maintenance of OpenFOAM.
e.g.
motorBike
{
type triSurfaceMesh;
file "motorBike.obj";
}
Based on patch provided by Mattijs Janssens
Resolves part of bug-report https://bugs.openfoam.org/view.php?id=2396
