Files
OpenFOAM-6/tutorials/multiphase/multiphaseInterFoam/laminar/mixerVessel2D/system/fvSolution
Henry 3e2b64c08d MULES: nLimiterIter and smoothLimiter are now user-input via the corresponding fvSolution sub-dict
nLimiterIter: Number of iterations during limiter construction
    3 (default) is sufficient for 3D simulations with a Courant number 0.5 or so
    For larger Courant numbers larger values may be needed but this is
    only relevant for IMULES and CMULES

smoothLimiter: Coefficient to smooth the limiter to avoid "diamond"
    staggering patters seen in regions of low particle phase-fraction in
    fluidised-bed simulations.

    The default is 0 as it is not needed for all simulations.
    A value of 0.1 is appropriate for fluidised-bed simulations.
    The useful range is 0 -> 0.5.
    Values larger than 0.5 may cause excessive smearing of the solution.
2015-04-29 14:37:41 +01:00

79 lines
1.7 KiB
C++

/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object fvSolution;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
solvers
{
"alpha.*"
{
nAlphaCorr 4;
nAlphaSubCycles 4;
cAlpha 2;
}
pcorr
{
solver PCG;
preconditioner DIC;
tolerance 1e-10;
relTol 0;
}
p_rgh
{
solver PCG;
preconditioner DIC;
tolerance 1e-07;
relTol 0.05;
}
p_rghFinal
{
solver PCG;
preconditioner DIC;
tolerance 1e-07;
relTol 0;
}
"(U|alpha)"
{
solver smoothSolver;
smoother symGaussSeidel;
tolerance 1e-06;
relTol 0;
}
}
PIMPLE
{
momentumPredictor no;
nCorrectors 4;
nNonOrthogonalCorrectors 0;
pRefCell 0;
pRefValue 0;
}
relaxationFactors
{
equations
{
"U.*" 1;
}
}
// ************************************************************************* //