mirror of
https://github.com/OpenFOAM/OpenFOAM-6.git
synced 2025-12-08 06:57:46 +00:00
d3a237f560
- Thermal phase change and wall boiling functionality has been generalized to support two- and multi- phase simulations. - Thermal phase change now also allows purePhaseModel, which simplifies case setup. - The phaseSystem templates have been restructured in preparation of multiple simultaneous mass transfer mechanisms. For example, combination of thermal phase and inhomogeneous population balance models. Patch contributed by VTT Technical Research Centre of Finland Ltd and Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden - Rossendorf (HZDR).
64 lines
1.8 KiB
Plaintext
64 lines
1.8 KiB
Plaintext
/*--------------------------------*- C++ -*----------------------------------*\
|
|
| ========= | |
|
|
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
|
|
| \\ / O peration | Version: dev |
|
|
| \\ / A nd | Web: www.OpenFOAM.org |
|
|
| \\/ M anipulation | |
|
|
\*---------------------------------------------------------------------------*/
|
|
FoamFile
|
|
{
|
|
version 2.0;
|
|
format ascii;
|
|
class volScalarField;
|
|
location "0";
|
|
object epsilon.liquid;
|
|
}
|
|
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
|
|
|
dimensions [0 2 -3 0 0 0 0];
|
|
|
|
internalField uniform 0.001;
|
|
|
|
boundaryField
|
|
{
|
|
inlet
|
|
{
|
|
type mapped;
|
|
field epsilon.liquid;
|
|
setAverage 0;
|
|
average 0;
|
|
interpolationScheme cell;
|
|
value uniform 0.001;
|
|
}
|
|
outlet
|
|
{
|
|
type inletOutlet;
|
|
phi phi.liquid;
|
|
inletValue uniform 0.00015;
|
|
value uniform 0.001;
|
|
}
|
|
wall1
|
|
{
|
|
type epsilonWallFunction;
|
|
Cmu 0.09;
|
|
kappa 0.41;
|
|
E 9.8;
|
|
value uniform 0.001;
|
|
}
|
|
wall2
|
|
{
|
|
type epsilonWallFunction;
|
|
Cmu 0.09;
|
|
kappa 0.41;
|
|
E 9.8;
|
|
value uniform 0.001;
|
|
}
|
|
defaultFaces
|
|
{
|
|
type empty;
|
|
}
|
|
}
|
|
|
|
|
|
// ************************************************************************* //
|