tutorials: Renamed .org -> .orig

See http://www.openfoam.org/mantisbt/view.php?id=2076
  - .org is the file extension for emacs org-mode as well
  - .orig is more to the point (.org isn't always recognized as "original")
  - .original is too long, although more consistent with the convention
    of source code file naming

Update script contributed by Bruno Santos

tutorials/Alltest

@@ -156,22 +156,22 @@ then
 fi
 
 echo "Modifying ${MAIN_CONTROL_DICT}"
-if [ -e ${MAIN_CONTROL_DICT}.org ]
+if [ -e ${MAIN_CONTROL_DICT}.orig ]
 then
-    echo "File ${MAIN_CONTROL_DICT}.org already exists"
+    echo "File ${MAIN_CONTROL_DICT}.orig already exists"
     echo "Did Alltest fail in some way and then run again?"
     exit 1
 fi
 
 # Clean up on termination and on Ctrl-C
-trap 'mv ${MAIN_CONTROL_DICT}.org ${MAIN_CONTROL_DICT} 2>/dev/null; exit 0' \
+trap 'mv ${MAIN_CONTROL_DICT}.orig ${MAIN_CONTROL_DICT} 2>/dev/null; exit 0' \
     EXIT TERM INT
-cp ${MAIN_CONTROL_DICT} ${MAIN_CONTROL_DICT}.org
+cp ${MAIN_CONTROL_DICT} ${MAIN_CONTROL_DICT}.orig
 
 sed \
 -e s/"\(fvSchemes[ \t]*\)\([0-9]\);"/"\1 1;"/g \
 -e s/"\(solution[ \t]*\)\([0-9]\);"/"\1 1;"/g \
-${MAIN_CONTROL_DICT}.org > ${MAIN_CONTROL_DICT}
+${MAIN_CONTROL_DICT}.orig > ${MAIN_CONTROL_DICT}
 
 echo "Copying the tutorials"
 cp -a ${TUTORIALS_DIR} ${TEST_RUN_DIR}
@@ -181,13 +181,13 @@ cd ${TEST_RUN_DIR} || exit 1
 
 for CD in `find . -name "controlDict*"`
 do
-    mv ${CD} ${CD}.org
+    mv ${CD} ${CD}.orig
     sed \
     -e s/"\(startFrom[ \t]*\)\([a-zA-Z]*\);"/"\1 latestTime;"/g \
     -e s/"\(stopAt[ \t]*\)\([a-zA-Z]*\);"/"\1 nextWrite;"/g \
     -e s/"\(writeControl[ \t]*\)\([a-zA-Z]*\);"/"\1 timeStep;"/g \
     -e s/"\(writeInterval[ \t]*\)\([0-9a-zA-Z.-]*\);"/"\1 1;"/g \
-    ${CD}.org > ${CD}
+    ${CD}.orig > ${CD}
 done
 
 if [ "$DEFAULT_SCHEMES" = true ]
@@ -197,8 +197,8 @@ then
     do
         for S in $FV_SCHEMES
         do
-            mv ${FV_SC} ${FV_SC}.org
+            mv ${FV_SC} ${FV_SC}.orig
-            sed -e /"${S}"/,/$p/d ${FV_SC}.org > ${FV_SC}
+            sed -e /"${S}"/,/$p/d ${FV_SC}.orig > ${FV_SC}
         done
         setDefaultFvSchemes >> ${FV_SC}
     done

tutorials/basic/potentialFoam/cylinder/Allrun

@@ -6,7 +6,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 application=`getApplication`
 
-cp -r 0.org 0 > /dev/null 2>&1
+cp -r 0.orig 0 > /dev/null 2>&1
 runApplication blockMesh
 runApplication $application -withFunctionObjects -writePhi -writep
 runApplication streamFunction

tutorials/basic/potentialFoam/pitzDaily/Allrun

@@ -6,7 +6,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 application=`getApplication`
 
-cp -r 0.org 0 > /dev/null 2>&1
+cp -r 0.orig 0 > /dev/null 2>&1
 runApplication blockMesh
 runApplication $application -writePhi -writep
 runApplication streamFunction

tutorials/combustion/PDRFoam/flamePropagationWithObstacles/Allrun

@@ -6,7 +6,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
 rm -rf 0
-cp -r 0.org 0
+cp -r 0.orig 0
 runApplication blockMesh
 runApplication changeDictionary
 runApplication topoSet

tutorials/compressible/rhoCentralFoam/shockTube/Allclean

@@ -5,7 +5,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/CleanFunctions
 
 rm -rf 0
-cp -r 0.org 0
+cp -r 0.orig 0
 cleanCase
 cleanSamples
 

tutorials/compressible/rhoPimpleDyMFoam/annularThermalMixer/Allrun

@@ -17,7 +17,7 @@ runApplication createPatch -overwrite
 runApplication createBaffles -overwrite
 runApplication mergeOrSplitBaffles -split -overwrite
 
-cp -r 0.org 0
+cp -r 0.orig 0
 
 runApplication $(getApplication)
 

tutorials/compressible/sonicFoam/laminar/shockTube/Allclean

@@ -6,7 +6,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 cleanCase
 rm -rf 0
-cp -r 0.org 0
+cp -r 0.orig 0
 cleanSamples
 
 #------------------------------------------------------------------------------

tutorials/heatTransfer/buoyantBoussinesqPimpleFoam/hotRoom/Allrun

@@ -7,7 +7,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 application=`getApplication`
 
 runApplication blockMesh
-cp 0/T.org 0/T
+cp 0/T.orig 0/T
 runApplication setFields
 runApplication $application
 

tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/hotRoom/Allrun

@@ -7,7 +7,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 application=`getApplication`
 
 runApplication blockMesh
-cp 0/T.org 0/T
+cp 0/T.orig 0/T
 runApplication setFields
 runApplication $application
 

tutorials/heatTransfer/buoyantPimpleFoam/hotRoom/Allclean

@@ -5,6 +5,6 @@ cd ${0%/*} || exit 1    # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/CleanFunctions
 
 cleanCase
-cp 0/T.org 0/T
+cp 0/T.orig 0/T
 
 #------------------------------------------------------------------------------

tutorials/heatTransfer/buoyantSimpleFoam/circuitBoardCooling/Allrun

@@ -6,7 +6,7 @@ application=`getApplication`
 
 runApplication blockMesh
 
-cp -r 0.org 0
+cp -r 0.orig 0
 
 # Create 1D and 3D baffles
 runApplication createBaffles -overwrite

tutorials/heatTransfer/chtMultiRegionSimpleFoam/heatExchanger/Allrun.pre

@@ -26,4 +26,4 @@ paraFoam -touch -region porous
 paraFoam -touch -region air
 
 
-cp -rf 0.org 0
+cp -rf 0.orig 0

tutorials/incompressible/pimpleDyMFoam/oscillatingInletACMI2D/Allrun.pre

@@ -14,4 +14,4 @@ runApplication createBaffles -overwrite
 # remove zero-sized patches
 runApplication createPatch -overwrite
 
-cp -rf 0.org 0
+cp -rf 0.orig 0