MRG: merged develop line back into integration branch

.gitignore

@@ -62,6 +62,7 @@ doc/Doxygen/DTAGS
 /etc/prefs.sh
 /etc/config.csh/prefs.csh
 /etc/config.sh/prefs.sh
+/wmake/rules/General/mplibUSER*
 
 # Source packages - anywhere
 *.tar.bz2

Allwmake

@@ -5,8 +5,8 @@ cd ${0%/*} && wmakeCheckPwd "$WM_PROJECT_DIR" 2>/dev/null || {
     echo "    Check your OpenFOAM environment and installation"
     exit 1
 }
-[ -n "$FOAM_EXT_LIBBIN" ] || {
-    echo "Error (${0##*/}) : FOAM_EXT_LIBBIN not set"
+[ -d "$WM_PROJECT_DIR" -a -f "$WM_PROJECT_DIR/etc/bashrc" ] || {
+    echo "Error (${0##*/}) : WM_PROJECT_DIR appears to be incorrect"
     echo "    Check your OpenFOAM environment and installation"
     exit 1
 }
@@ -22,8 +22,8 @@ echo "  $WM_COMPILER $WM_COMPILER_TYPE compiler"
 echo "  ${WM_OPTIONS}, with ${WM_MPLIB} ${FOAM_MPI}"
 echo
 
-# Compile wmake support applications
-(cd wmake/src && make)
+# Compile wmake tools
+(cd "${WM_DIR:-wmake}/src" && make)
 
 # Compile ThirdParty libraries and applications
 if [ -d "$WM_THIRD_PARTY_DIR" ]

README.md

@@ -1,5 +1,5 @@
 # About OpenFOAM
-OpenFOAM is a free, open source CFD software [released and developed primarily by OpenCFD Ltd](http://www.openfoam.com) since 2004released and developed primarily by. It has a large user base across most areas of engineering and science, from both commercial and academic organisations. OpenFOAM has an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to acoustics, solid mechanics and electromagnetics.  [More...](http://www.openfoam.com/documentation)
+OpenFOAM is a free, open source CFD software [released and developed primarily by OpenCFD Ltd](http://www.openfoam.com) since 2004. It has a large user base across most areas of engineering and science, from both commercial and academic organisations. OpenFOAM has an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to acoustics, solid mechanics and electromagnetics.  [More...](http://www.openfoam.com/documentation)
 
 OpenFOAM+ is professionally released every six months to include customer sponsored developments and contributions from the community, including the OpenFOAM Foundation. Releases designated OpenFOAM+ contain several man years of client-sponsored developments of which much has been transferred to, but not released in the OpenFOAM Foundation branch.
 
@@ -23,4 +23,4 @@ Violations of the Trademark are continuously monitored, and will be duly prosecu
 - [OpenFOAM Community](http://www.openfoam.com/community/)
 - [Contacting OpenCFD](http://www.openfoam.com/contact/)
 
-Copyright 2016 OpenCFD Ltd
+Copyright 2016-2017 OpenCFD Ltd

applications/Allwmake

@@ -5,8 +5,8 @@ cd ${0%/*} && wmakeCheckPwd "$WM_PROJECT_DIR/applications" 2>/dev/null || {
     echo "    Check your OpenFOAM environment and installation"
     exit 1
 }
-[ -n "$FOAM_EXT_LIBBIN" ] || {
-    echo "Error (${0##*/}) : FOAM_EXT_LIBBIN not set"
+[ -d "$WM_PROJECT_DIR" -a -f "$WM_PROJECT_DIR/etc/bashrc" ] || {
+    echo "Error (${0##*/}) : WM_PROJECT_DIR appears to be incorrect"
     echo "    Check your OpenFOAM environment and installation"
     exit 1
 }

applications/solvers/multiphase/interFoam/interMixingFoam/alphaEqn.H

@@ -108,6 +108,11 @@
             );
         }
 
+        alphaPhi1 = alphaPhi1BD + lambda*alphaPhi1;
+
+        // Reset allLambda to 1.0
+        allLambda = 1.0;
+
         // Create the complete flux for alpha2
         surfaceScalarField alphaPhi2
         (
@@ -172,7 +177,6 @@
         }
 
         // Construct the limited fluxes
-        alphaPhi1 = alphaPhi1BD + lambda*alphaPhi1;
         alphaPhi2 = alphaPhi2BD + lambda*alphaPhi2;
 
         // Solve for alpha1

applications/test/BinSum/Test-BinSum.C

@@ -46,7 +46,7 @@ int main(int argc, char *argv[])
     scalarField samples(10000000);
     forAll(samples, i)
     {
-        samples[i] = rndGen.scalar01();
+        samples[i] = rndGen.sample01<scalar>();
     }
 
     const scalar min = 0;

applications/test/DLList/Test-DLList.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -41,6 +41,8 @@ int main(int argc, char *argv[])
 {
     DLList<scalar> myList;
 
+    Info<< "DLList<scalar>" << nl;
+
     for (int i = 0; i<10; i++)
     {
         myList.append(1.3*i);
@@ -49,17 +51,14 @@ int main(int argc, char *argv[])
     myList.append(100.3);
     myList.append(500.3);
 
-    Info<< nl << "And again using STL iterator: " << nl << endl;
-
-    forAllIter(DLList<scalar>, myList, iter)
+    forAllConstIters(myList, iter)
     {
         Info<< "element:" << *iter << endl;
     }
 
-
     Info<< nl << "And again using the same STL iterator: " << nl << endl;
 
-    forAllIter(DLList<scalar>, myList, iter)
+    forAllIters(myList, iter)
     {
         Info<< "Removing " << myList.remove(iter) << endl;
     }
@@ -68,13 +67,10 @@ int main(int argc, char *argv[])
     myList.append(200.3);
     myList.append(100.3);
 
-
-    Info<< nl << "And again using STL const_iterator: " << nl << endl;
-
-
-    forAllConstIter(DLList<scalar>, myList, iter)
+    Info<< nl << "Using range-based for: " << nl << endl;
+    for (auto val : myList)
     {
-        Info<< "element:" << *iter << endl;
+        Info<< "element:" << val << endl;
     }
 
     Info<< nl << "Testing swapUp and swapDown: " << endl;
@@ -84,9 +80,9 @@ int main(int argc, char *argv[])
     myList.swapUp(myList.DLListBase::first());
     myList.swapUp(myList.DLListBase::last());
 
-    forAllIter(DLList<scalar>, myList, iter)
+    for (auto val : myList)
     {
-        Info<< "element:" << *iter << endl;
+        Info<< "element:" << val << endl;
     }
 
     Info<< nl << "swapDown" << endl;
@@ -94,12 +90,11 @@ int main(int argc, char *argv[])
     myList.swapDown(myList.DLListBase::first());
     myList.swapDown(myList.DLListBase::last());
 
-    forAllIter(DLList<scalar>, myList, iter)
+    for (auto val : myList)
     {
-        Info<< "element:" << *iter << endl;
+        Info<< "element:" << val << endl;
     }
 
-
     Info<< nl << "Testing transfer: " << nl << nl
         << "original: " << myList << endl;
 

applications/test/Dictionary/Test-Dictionary.C

@@ -168,9 +168,24 @@ int main(int argc, char *argv[])
     Info<< nl << "scalarDict2: " << endl;
     forAllConstIter(PtrDictionary<Scalar>, scalarDict2, iter)
     {
+        std::cout<< "iter: " << typeid(*iter).name() << '\n';
+
         Info<< "elem = " << *iter << endl;
     }
 
+    // FIXME: the deduction seems to be different here.
+    // - returns pointer (as perhaps actually expected) not the
+    //  underlying value.
+    forAllConstIters(scalarDict2, iter)
+    {
+        std::cout<< "iter: " << typeid(*iter).name() << '\n';
+
+        Info<< "elem = " << *(*iter) << endl;
+    }
+
+    std::cout<< "iter type: "
+        << typeid(stdFoam::begin(scalarDict2)).name() << '\n';
+
     scalarDict.transfer(scalarDict2);
 
 

applications/test/Distribution/Test-Distribution.C

@@ -71,7 +71,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dS.add(2.5*R.GaussNormal() + 8.5);
+            dS.add(2.5*R.GaussNormal<scalar>() + 8.5);
         }
 
         Info<< "Mean " << dS.mean() << nl
@@ -90,7 +90,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dS2.add(1.5*R.GaussNormal() -6.0);
+            dS2.add(1.5*R.GaussNormal<scalar>() -6.0);
         }
 
         Info<< "Mean " << dS2.mean() << nl
@@ -121,7 +121,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dS.add(R.scalar01() + 10*Pstream::myProcNo());
+            dS.add(R.sample01<scalar>() + 10*Pstream::myProcNo());
         }
 
         Pout<< "Mean " << dS.mean() << nl
@@ -155,7 +155,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dV.add(R.vector01());
+            dV.add(R.sample01<vector>());
 
             // Adding separate GaussNormal components with component
             // weights
@@ -164,9 +164,9 @@ int main(int argc, char *argv[])
             (
                 vector
                 (
-                    R.GaussNormal()*3.0 + 1.5,
-                    R.GaussNormal()*0.25 + 4.0,
-                    R.GaussNormal()*3.0 - 1.5
+                    R.GaussNormal<scalar>()*3.0 + 1.5,
+                    R.GaussNormal<scalar>()*0.25 + 4.0,
+                    R.GaussNormal<scalar>()*3.0 - 1.5
                 ),
                 vector(1.0, 2.0, 5.0)
             );
@@ -225,7 +225,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dT.add(R.tensor01());
+            dT.add(R.sample01<tensor>());
         }
 
         Info<< "Mean " << dT.mean() << nl
@@ -249,7 +249,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dSyT.add(R.symmTensor01());
+            dSyT.add(R.sample01<symmTensor>());
         }
 
         Info<< "Mean " << dSyT.mean() << nl
@@ -273,7 +273,7 @@ int main(int argc, char *argv[])
 
         for (label i = 0; i < randomDistributionTestSize; i++)
         {
-            dSpT.add(R.sphericalTensor01());
+            dSpT.add(R.sample01<sphericalTensor>());
         }
 
         Info<< "Mean " << dSpT.mean() << nl

applications/test/FixedList/Test-FixedList.C

@@ -33,7 +33,6 @@ See also
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
-#include "IOstreams.H"
 #include "FixedList.H"
 #include "IFstream.H"
 #include "OFstream.H"
@@ -64,6 +63,15 @@ int main(int argc, char *argv[])
     Info<< "list2:" << list2
         << " hash:" << FixedList<label, 4>::Hash<>()(list2) << endl;
 
+    // Using FixedList for content too
+    {
+        List<FixedList<label, 4>> twolists{list, list2};
+        Info<<"List of FixedList: " << flatOutput(twolists) << endl;
+        sort(twolists);
+        // outer-sort only
+        Info<<"sorted FixedList : " << flatOutput(twolists) << endl;
+    }
+
     Info<< "list: " << list << nl
         << "list2: " << list2 << endl;
     list.swap(list2);

applications/test/HashPtrTable/Test-hashPtrTable.C

@@ -36,14 +36,9 @@ void printTable(const HashPtrTable<T>& table)
 {
     Info<< table.size() << nl << "(" << nl;
 
-    for
-    (
-        typename HashPtrTable<T>::const_iterator iter = table.cbegin();
-        iter != table.cend();
-        ++iter
-    )
+    forAllConstIters(table, iter)
     {
-        const T* ptr = *iter;
+        const T* ptr = iter.object();
         Info<< iter.key() << " = ";
         if (ptr)
         {
@@ -57,6 +52,22 @@ void printTable(const HashPtrTable<T>& table)
     }
 
     Info<< ")" << endl;
+
+    // Values only, with for-range
+    Info<< "values (";
+    for (auto val : table)
+    {
+        Info<< ' ';
+        if (val)
+        {
+            Info<< *val;
+        }
+        else
+        {
+            Info<< "nullptr";
+        }
+    }
+    Info<< " )" << nl;
 }
 
 
@@ -68,7 +79,9 @@ int main()
     HashPtrTable<double> myTable;
     myTable.insert("abc", new double(42.1));
     myTable.insert("def", nullptr);
-    myTable.insert("ghi", new double(3.14159));
+    myTable.insert("pi", new double(3.14159));
+    myTable.insert("natlog", new double(2.718282));
+    myTable.insert("sqrt2", new double(1.414214));
 
     // Info<< myTable << endl;
     printTable(myTable);
@@ -79,8 +92,20 @@ int main()
     printTable(copy);
     Info<< copy << endl;
 
+    Info<<"\nerase some existing and non-existing entries" << nl;
+
+    auto iter = myTable.find("pi");
+    myTable.erase(iter);
+
+    iter = myTable.find("unknownKey");
+    myTable.erase(iter);
+
+    myTable.erase("abc");
+    myTable.erase("unknownKey");
+
+    printTable(myTable);
+
     return 0;
 }
 
-
 // ************************************************************************* //

applications/test/HashSet/Test-hashSet.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -28,6 +28,8 @@ Description
 #include "hashedWordList.H"
 #include "HashSet.H"
 #include "Map.H"
+#include "labelPairHashes.H"
+#include "FlatOutput.H"
 
 using namespace Foam;
 
@@ -65,6 +67,14 @@ int main(int argc, char *argv[])
     tableB.insert("value5", nil());
     tableB.insert("value6", nil());
 
+    Info<< "tableA keys: "; tableA.writeKeys(Info) << endl;
+
+    auto keyIterPair = tableA.keys();
+    for (const auto& i : keyIterPair)
+    {
+        Info<<" keys: " << i << endl;
+    }
+
     Map<label> mapA
     {
         { 1, 1 },
@@ -122,14 +132,23 @@ int main(int argc, char *argv[])
         << (wordHashSet(setA) | wordHashSet(tableA) | wordHashSet(tableB))
         << nl;
 
-
     labelHashSet setB
     {
         1, 11, 42
     };
 
+    setB = FixedList<label, 4>({1, 2, 3, 4});
+    setB = {1, 2, 4};
+    setB = List<label>({1, 2, 4});
     Info<< "setB : " << setB << endl;
 
+    labelPair pair(12, 15);
+    setB.set(pair);
+
+    Info<< "setB : " << setB << endl;
+    setB.unset(pair);
+
+
     labelHashSet setC(1);
     setC.insert(2008);
     setC.insert(1984);
@@ -139,7 +158,7 @@ int main(int argc, char *argv[])
     labelHashSet setD(1);
     setD.insert({11, 100, 49, 36, 2008});
 
-    Info<< "setD : " << setD << endl;
+    Info<< "setD : " << flatOutput(setD) << endl;
 
     Info<< "setB == setC: " << (setB == setC) << endl;
     Info<< "setC != setD: " << (setC != setD) << endl;
@@ -178,9 +197,13 @@ int main(int argc, char *argv[])
         Info<< "setD has no 11" << endl;
     }
 
-    Info<< "setD : " << setD << endl;
+    Info<< "setB : " << flatOutput(setB) << endl;
+    Info<< "setD : " << flatOutput(setD) << endl;
 
-    // this doesn't work (yet?)
+    setD -= setB;
+    Info<< "setD -= setB : " << flatOutput(setD) << endl;
+
+    // This should not work (yet?)
     // setD[12] = true;
 
     List<label> someLst(10);
@@ -191,8 +214,14 @@ int main(int argc, char *argv[])
 
     label added = setD.set(someLst);
     Info<< "added " << added << " from " << someLst.size() << endl;
-    Info<< "setD : " << setD << endl;
+    Info<< "setD : " << flatOutput(setD) << endl;
 
+    Info<< "setD for-range()" << nl;
+
+    for (auto i : setD)
+    {
+        Info << i << endl;
+    }
 
     return 0;
 }

applications/test/HashTable/Test-hashTable.C

@@ -24,6 +24,10 @@ License
 \*---------------------------------------------------------------------------*/
 
 #include "HashTable.H"
+#include "List.H"
+#include "SortableList.H"
+#include "DynamicList.H"
+#include "FlatOutput.H"
 #include "IOstreams.H"
 #include "IStringStream.H"
 #include "OStringStream.H"
@@ -62,7 +66,7 @@ int main()
     Info<< "\ntable1 sortedToc: " << table1.sortedToc() << endl;
     table1.printInfo(Info)
         << "table1 [" << table1.size() << "] " << endl;
-    forAllConstIter(HashTable<scalar>, table1, iter)
+    forAllConstIters(table1, iter)
     {
         Info<< iter.key() << " => " << iter() << nl;
     }
@@ -106,7 +110,7 @@ int main()
         << "\ntable3" << table3 << nl;
 
     Info<< "\nerase table2 by iterator" << nl;
-    forAllIter(HashTable<scalar>, table2, iter)
+    forAllIters(table2, iter)
     {
         Info<< "erasing " << iter.key() << " => " << iter.object() << " ... ";
         table2.erase(iter);
@@ -162,21 +166,74 @@ int main()
         << "\ntable2" << table2 << nl;
 
 
-    Info<< "\ntable3" << table3
-        << "\nclearStorage table3 ... ";
-    table3.clearStorage();
-    Info<< table3 << nl;
+    Info<< "\ntable3" << table2
+        << "\nclearStorage table2 ... ";
+    table2.clearStorage();
+    Info<< table2 << nl;
 
     table1 =
     {
-        {"aca", 3.0},
-        {"aaw", 6.0},
+        {"abc", 3.0},
+        {"def", 6.0},
         {"acr", 8.0},
         {"aec", 10.0}
     };
 
     Info<< "\ntable1" << table1 << nl;
 
+    Info<< "\nrange-for(table1) - returns values" << nl;
+    for (const auto& it : table1)
+    {
+        Info<< "val:" << it << nl;
+    }
+
+    Info<< "\nrange-for(table1.keys()) - returns keys" << nl;
+    for (const auto& k : table1.keys())
+    {
+        Info<< "key:" << k << nl;
+    }
+
+    // These do not yet work. Issues resolving the distance.
+    //
+    //  List<scalar> table1vals(table1.begin(), table1.end());
+
+    {
+        Info<<"distance/size: "
+            << std::distance(table1.begin(), table1.end())
+            << "/" << table1.size()
+            << " and "
+            << std::distance(table1.keys().begin(), table1.keys().end())
+            << "/" << table1.keys().size()
+            << nl;
+
+        SortableList<word> sortKeys
+        // DynamicList<word> sortKeys
+        (
+            table1.keys().begin(),
+            table1.keys().end()
+        );
+        Info<<"sortKeys: " << flatOutput(sortKeys) << nl;
+    }
+
+    Info<< "\nFrom table1: " << flatOutput(table1.sortedToc()) << nl
+        << "retain keys: " << flatOutput(table3.sortedToc()) << nl;
+
+    table1.retain(table3);
+    Info<< "-> " << flatOutput(table1.sortedToc()) << nl;
+
+    Info<< "Lookup non-existent" << nl;
+
+    Info<< table1.lookup("missing-const", 1.2345e+6)
+        << "  // const-access" << nl;
+
+    Info<< table1("missing-inadvertent", 3.14159)
+        << "  // (inadvertent?) non-const access"  << nl;
+
+    Info<< table1("missing-autovivify")
+        << "  // Known auto-vivification (non-const access)" << nl;
+
+    Info<<"\ntable1: " << table1 << endl;
+
     Info<< "\nDone\n";
 
     return 0;

applications/test/ISLList/Test-ISLList.C

@@ -78,7 +78,7 @@ int main(int argc, char *argv[])
 
     Info<< nl << "And again using STL iterator: " << nl << endl;
 
-    forAllIter(SLList<scalar>, myList, iter)
+    forAllIters(myList, iter)
     {
         Info<< "element:" << *iter << endl;
     }
@@ -87,7 +87,7 @@ int main(int argc, char *argv[])
 
     const ISLList<Scalar>& const_myList = myList;
 
-    forAllConstIter(SLList<scalar>, const_myList, iter)
+    forAllConstIters(const_myList, iter)
     {
         Info<< "element:" << *iter << endl;
     }

applications/test/List/Test-List.C

@@ -42,6 +42,7 @@ See also
 #include "vector.H"
 
 #include "labelRange.H"
+#include "scalarList.H"
 #include "ListOps.H"
 #include "SubList.H"
 
@@ -76,7 +77,6 @@ int main(int argc, char *argv[])
         Info<<"is >>: " << intlist << endl;
     }
 
-
     List<vector> list1(IStringStream("1 ((0 1 2))")());
     Info<< "list1: " << list1 << endl;
 
@@ -145,12 +145,23 @@ int main(int argc, char *argv[])
 
         labelList longLabelList = identity(15);
 
+        // This does not work:
+        // scalarList slist = identity(15);
+        //
+        // More writing, but does work:
+        scalarList slist
+        (
+            labelRange::null.begin(),
+            labelRange::identity(15).end()
+        );
+
+        Info<<"scalar identity:" << flatOutput(slist) << endl;
+
         Info<< "labels (contiguous=" << contiguous<label>() << ")" << nl;
 
         Info<< "normal: " << longLabelList << nl;
         Info<< "flatOutput: " << flatOutput(longLabelList) << nl;
         // Info<< "flatOutput(14): " << flatOutput(longLabelList, 14) << nl;
-        // Info<< "flatOutput(15): " << flatOutput(longLabelList, 15) << nl;
 
         stringList longStringList(12);
         forAll(longStringList, i)
@@ -165,6 +176,91 @@ int main(int argc, char *argv[])
         // contiguous longStringList[i].resize(3, 'a' + i);
     }
 
+    // test SubList and labelRange
+    {
+        Info<< nl;
+        labelList longLabelList = identity(25);
+        reverse(longLabelList);
+
+        FixedList<label, 6> fixedLabelList{0,1,2,3,4,5};
+        const labelList constLabelList = identity(25);
+
+        Info<< "full-list: " << flatOutput(longLabelList) << nl;
+
+        labelRange range1(-15, 25);
+        Info<<"sub range:" << range1 << "=";
+        Info<< SubList<label>(longLabelList, range1) << nl;
+
+        labelRange range2(7, 8);
+        Info<<"sub range:" << range2 << "=";
+        Info<< SubList<label>(longLabelList, range2) << nl;
+
+        // labelRange range2(7, 8);
+        Info<<"use range " << range2 << " to set value";
+        SubList<label>(longLabelList, range2) = -15;
+        Info<< "=> " << flatOutput(longLabelList) << nl;
+
+        // This syntax looks even nicer:
+
+        // GOOD: does not compile
+        // > constLabelList[labelRange(23,5)] = 5;
+
+        // Check correct overlaps
+        longLabelList[labelRange(-10, 12)] = 200;
+        longLabelList[{18,3}] = 100;
+        longLabelList[{23,3}] = 400;
+        // and complete misses
+        longLabelList[{500,50}] = 100;
+
+        // labelRange automatically suppresses -ve size -> nop
+        longLabelList[{5,-5}] = 42;
+        longLabelList[{21,100}] = 42;
+
+        //Good: does not compile
+        //> longLabelList[labelRange(20,50)] = constLabelList;
+
+        //Good: does not compile
+        // longLabelList[labelRange(20,50)] = fixedLabelList;
+
+        Info<< "updated: " << constLabelList[labelRange(23,5)] << nl;
+        Info<< "updated: " << flatOutput(longLabelList) << nl;
+
+        //Nope: sort(longLabelList[labelRange(18,5)]);
+        {
+            // Instead
+            UList<label> sub = longLabelList[labelRange(0, 8)];
+            sort(sub);
+        }
+        Info<< "sub-sorted: " << flatOutput(longLabelList) << nl;
+
+        // construct from a label-range
+        labelRange range(25,15);
+
+        labelList ident(range.begin(), range.end());
+        Info<<"range-list (label)=" << ident << nl;
+
+        List<scalar> sident(range.begin(), range.end());
+        Info<<"range-list (scalar)=" << sident << nl;
+
+        // Sub-ranges also work
+        List<scalar> sident2(range(3), range(10));
+        Info<<"range-list (scalar)=" << sident2 << nl;
+
+        // VERY BAD IDEA: List<scalar> sident3(range(10), range(3));
+
+        // This doesn't work, and don't know what it should do anyhow
+        // List<vector> vident(range.begin(), range.end());
+        // Info<<"range-list (vector)=" << vident << nl;
+
+        // Even weird things like this
+        List<scalar> sident4
+        (
+            labelRange().begin(),
+            labelRange::identity(8).end()
+        );
+        Info<<"range-list (scalar)=" << sident4 << nl;
+    }
+
     wordReList reLst;
     wordList wLst;
     stringList sLst;

applications/test/Map/Test-Map.C

@@ -22,10 +22,9 @@ License
     along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
 Application
-    testMapIterators
+    Test-Map
 
 Description
-    For each time calculate the magnitude of velocity.
 
 \*---------------------------------------------------------------------------*/
 
@@ -39,9 +38,7 @@ using namespace Foam;
 
 int main(int argc, char *argv[])
 {
-    Map<bool> banana;
-
-    banana.insert(5, true);
+    Map<bool> banana{{5, true}};
 
     // Taking a const iterator from find does not work!
     // Also, fails later on op==
@@ -50,7 +47,7 @@ int main(int argc, char *argv[])
     // This works but now I can change the value.
     //Map<bool>::iterator bananaIter = banana.find(5);
 
-    if (bananaIter == banana.end())
+    if (!bananaIter.found()) // same as  (bananaIter == banana.end())
     {
         Info<< "not found" << endl;
     }
@@ -62,8 +59,7 @@ int main(int argc, char *argv[])
     // Same with STL
     Info<< "Same with STL" << endl;
 
-    std::map<label, bool> STLbanana;
-    STLbanana[5] = true;
+    std::map<label, bool> STLbanana{{5, true}};
     std::map<label, bool>::const_iterator STLbananaIter = STLbanana.find(5);
 
     if (STLbananaIter == STLbanana.end())

applications/test/NamedEnum/Test-NamedEnum.C

@@ -77,24 +77,12 @@ int main(int argc, char *argv[])
             << "] = '" << namedEnumTest::namedEnum[opt] << "'" << nl;
     }
 
-#if __cplusplus > 201100L
-    // C++11
     Info<< "loop over enums (C++11 for range):" << nl;
-    for (auto const& opt : options)
+    for (const auto& opt : options)
     {
         Info<< "option[" << opt
             << "] = '" << namedEnumTest::namedEnum[opt] << "'" << nl;
     }
-#else
-    Info<< "loop over enums (via iterator):" << nl;
-    forAllConstIter(List<namedEnumTest::option>, options, iter)
-    {
-        const namedEnumTest::option& opt = *iter;
-
-        Info<< "option[" << opt
-            << "] = '" << namedEnumTest::namedEnum[opt] << "'" << nl;
-    }
-#endif
 
     Info<< nl
         << namedEnumTest::namedEnum["a"] << nl

applications/test/Polynomial/Test-Polynomial.C

@@ -152,7 +152,7 @@ int main(int argc, char *argv[])
     Random rnd(123456);
     for (int i=0; i<10; i++)
     {
-        scalar x = rnd.scalar01()*100;
+        scalar x = rnd.sample01<scalar>()*100;
 
         scalar px = polyValue(x);
         scalar ipx = intPolyValue(x);

applications/test/SLList/Test-SLList.C

@@ -52,29 +52,29 @@ int main(int argc, char *argv[])
 
     Info<< nl << "And again using STL iterator: " << nl << endl;
 
-    forAllIter(SLList<scalar>, myList, iter)
+    for (const auto& val : myList)
     {
-        Info<< "element:" << *iter << endl;
+        Info<< "element:" << val << endl;
     }
 
     Info<< nl << "And again using STL const_iterator: " << nl << endl;
 
     const SLList<scalar>& const_myList = myList;
 
-    forAllConstIter(SLList<scalar>, const_myList, iter)
+    forAllConstIters(const_myList, iter)
     {
         Info<< "element:" << *iter << endl;
     }
 
-    forAllIter(SLList<scalar>, myList, iter)
+    forAllIters(myList, iter)
     {
         Info<< "Removing element:" << *iter << endl;
         myList.remove(iter);
     }
 
-    forAllConstIter(SLList<scalar>, const_myList, iter)
+    for (const auto& val : const_myList)
     {
-        Info<< "element:" << *iter << endl;
+        Info<< "element:" << val << endl;
     }
 
 

applications/test/Tuple2/Test-Tuple2.C

@@ -31,6 +31,7 @@ Description
 #include "Tuple2.H"
 #include "label.H"
 #include "scalar.H"
+#include "List.H"
 
 using namespace Foam;
 
@@ -39,9 +40,25 @@ using namespace Foam;
 
 int main()
 {
-    Tuple2<label, scalar> t2(1, 3.2);
+    typedef Tuple2<label, scalar> indexedScalar;
 
-    Info<< t2 << " " << t2.first() << " " << t2.second() << endl;
+    indexedScalar t2(1, 3.2);
+
+    Info<< "tuple: "
+        << t2 << " "
+        << t2.first() << " " << t2.second() << endl;
+
+    List<indexedScalar> list1(10);
+    forAll(list1, i)
+    {
+        list1[i] = indexedScalar(-i, i*i);
+    }
+
+    sort(list1);
+
+    Info<< "tuples:" << nl
+        << list1
+        << endl;
 
     Info<< "End\n" << endl;
 

applications/test/cplusplus1/Make/files

@@ -0,0 +1,3 @@
+Test-cpluplus1.C
+
+EXE = $(FOAM_USER_APPBIN)/Test-cpluplus1

applications/test/cplusplus1/Make/options

@@ -0,0 +1,2 @@
+/* EXE_INC = -I$(LIB_SRC)/cfdTools/include */
+/* EXE_LIBS = -lfiniteVolume */

applications/test/cplusplus1/Test-cpluplus1.C

@@ -0,0 +1,88 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | Copyright (C) 2017 OpenCFD Ltd.
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+Description
+    Test miscellaneous C++ templates/functionality.
+
+\*---------------------------------------------------------------------------*/
+
+#include "string.H"
+#include "IOstreams.H"
+#include "UList.H"
+#include "HashSet.H"
+
+#include <typeinfo>
+#include <type_traits>
+#include <utility>
+
+using namespace Foam;
+
+// Macros to stringify macro contents.
+#define STRINGIFY(content)      #content
+#define STRING_QUOTE(input)     STRINGIFY(input)
+
+#define PRINT_TYPEID(arg)       \
+    Info<< typeid(arg).name() << " <= typeid of " << STRING_QUOTE(arg) << nl
+
+
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+// Main program:
+
+int main(int argc, char *argv[])
+{
+    Info<< "various declaration types" << nl << nl;
+
+    PRINT_TYPEID(label);
+    PRINT_TYPEID(decltype(UList<label>::value_type()));
+    PRINT_TYPEID(decltype(std::declval<UList<label>>().cbegin()));
+    PRINT_TYPEID(decltype(*(std::declval<UList<label>>().cbegin())));
+    Info<< nl;
+
+    PRINT_TYPEID(decltype(HashTable<label>::key_type()));
+    PRINT_TYPEID(decltype(HashTable<label>::value_type()));
+    // Not yet: PRINT_TYPEID(decltype(HashTable<label>::mapped_type()));
+    PRINT_TYPEID(decltype(std::declval<HashTable<label>>().begin()));
+    PRINT_TYPEID(decltype(std::declval<const HashTable<label>>().begin()));
+    PRINT_TYPEID(decltype(*(std::declval<HashTable<label>>().begin())));
+    PRINT_TYPEID(decltype(*(std::declval<const HashTable<label>>().begin())));
+
+    PRINT_TYPEID(decltype(std::declval<const HashTable<label>>().keys()));
+    Info<< nl;
+
+    PRINT_TYPEID(decltype(HashSet<label>::key_type()));
+    PRINT_TYPEID(decltype(HashSet<label>::value_type()));
+    // Not yet: PRINT_TYPEID(decltype(HashSet<label>::mapped_type()));
+    PRINT_TYPEID(decltype(std::declval<HashSet<label>>().begin()));
+    PRINT_TYPEID(decltype(std::declval<const HashSet<label>>().begin()));
+    PRINT_TYPEID(decltype(*(std::declval<HashSet<label>>().begin())));
+    PRINT_TYPEID(decltype(*(std::declval<const HashSet<label>>().begin())));
+    Info<< nl;
+
+    Info << "\nEnd\n" << endl;
+
+    return 0;
+}
+
+
+// ************************************************************************* //

applications/test/dictionary/testSubkeyword

@@ -0,0 +1,53 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  plus                                  |
+|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       dictionary;
+    object      testDict;
+    note        "test with foamDictionary -expand";
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+// #inputMode  overwrite
+
+key1 val1;
+
+subdict
+{
+    key1 a;
+    key2 b;
+}
+
+update
+{
+    key1 val1b;
+    key2 val2;
+
+    subdict
+    {
+        key2 $key1;
+        key3 val3;
+        key2b ${..key2};
+        key3b $^key1;
+    }
+}
+
+
+$update
+
+// Can a leading '^' or  ':' as anchor for scoping
+key3 $^subdict.key1;
+key3 ${^update.subdict.key3};
+key4 ${:update.subdict...subdict.key1};
+
+// This is currently not working
+#remove update.key1
+// #remove update
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

applications/test/dynamicIndexedOctree/Make/options

@@ -1,3 +1,3 @@
-EXE_INC = -I$(FOAM_SRC)/meshTools/lnInclude
+EXE_INC = -I$(LIB_SRC)/meshTools/lnInclude
 
 EXE_LIBS = -lmeshTools

applications/test/edges/Make/files

@@ -0,0 +1,3 @@
+Test-edges.C
+
+EXE = $(FOAM_USER_APPBIN)/Test-edges

applications/test/edges/Test-edges.C

@@ -0,0 +1,148 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | Copyright (C) 2017 OpenCFD Ltd.
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+Application
+    Test-edges
+
+Description
+    Simple tests for edges
+
+\*---------------------------------------------------------------------------*/
+
+#include "argList.H"
+#include "edgeList.H"
+#include "edgeHashes.H"
+
+using namespace Foam;
+
+void printInfo(const edge& e)
+{
+    Info<< "edge: " << e << " count:" << e.count() << nl;
+}
+
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+//  Main program:
+
+int main(int argc, char *argv[])
+{
+    edge e1;
+    printInfo(e1);
+    Info<<"has '2'? " << e1.found(2) << endl;
+
+    edge e2(1, 2);
+    printInfo(e2);
+    Info<<"has '2'? " << e2.found(2) << endl;
+
+    edge e3{2, 3};
+    printInfo(e3);
+    Info<<"has '2'? " << e3.found(2) << endl;
+
+    edge e4(4, 4);
+    printInfo(e4);
+    Info<<"has '2'? " << e4.found(2) << endl;
+
+    Info<<"collapse? -> " << e4.collapse() << endl;
+    printInfo(e4);
+
+    Info<< e3 << " connects " << e2 << " => " << e2.connects(e3) << endl;
+
+    labelPair labels(e3);
+
+    Info<< "as labelPair: " << labels << endl;
+
+    edge e5;
+    // Good: this fails (explicit constructor):   printInfo(labels);
+    // Good: this also fails (no assignment operator): e5 = labels;
+
+    // OK: explicit
+    edge e6(labels);
+
+    Info<< nl << "hash-like functionality" << nl;
+
+    // doesn't work e4 = -1;
+    e4.start() = e4.end() = -1;
+
+    printInfo(e4);
+    for (label i : {2, -1, 2, 1, 4, 1, 2, 3})
+    {
+        bool ok = e4.insert(i);
+        Info<< "insert(" << i << ") = " << ok << " resulting ";
+        printInfo(e4);
+    }
+
+    e4.start() = e4.end() = -1;
+    Info<< "insert from list\n";
+    labelHashSet newIndices({2, -1, 2, 1, 4, 1, 2, 3});
+    e4.insert(newIndices.toc());
+    printInfo(e4);
+
+    e4.start() = e4.end() = -1;
+    Info<< "insert from list\n";
+    e4.insert({0, 5, 2, -1, 2, 1, 4, 1, 2, 3});
+    printInfo(e4);
+
+    FixedList<label, 8> otherIndices{12, 2, -1, 1, 4, 1, 2, 3};
+    e4.start() = e4.end() = -1;
+    Info<< "insert from list: " << otherIndices << nl;
+    e4.insert(otherIndices);
+    printInfo(e4);
+
+    e4.start() = e4.end();
+    Info<< "erase from list: " << otherIndices << nl;
+    Info<< "removed " << e4.erase(otherIndices) << " values" << nl;
+    printInfo(e4);
+
+    for (label i : {-1, 0, 1, 3})
+    {
+        bool ok = e4.erase(i);
+        Info<< "erase(" << i << ") = " << ok << " resulting ";
+        printInfo(e4);
+    }
+
+    for (label i : {-1, 0, 1, 3})
+    {
+        bool ok = e4.insert(i);
+        Info<< "insert(" << i << ") = " << ok << " resulting ";
+        printInfo(e4);
+    }
+    e4.flip();
+    Info<< "flipped ";
+    printInfo(e4);
+
+    for (label i : {-1, 0, 1, 3})
+    {
+        bool ok = e4.erase(i);
+        Info<< "erase(" << i << ") = " << ok << " resulting ";
+        printInfo(e4);
+    }
+
+    e4.sort();
+    Info<< "sorted ";
+    printInfo(e4);
+
+    return 0;
+}
+
+
+// ************************************************************************* //

applications/test/etcFiles/Make/files

@@ -0,0 +1,3 @@
+Test-etcFiles.C
+
+EXE = $(FOAM_USER_APPBIN)/Test-etcFiles

applications/test/etcFiles/Test-etcFiles.C

@@ -0,0 +1,122 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | Copyright (C) 2017 OpenCFD Ltd.
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+Application
+    Test-etcFiles
+
+Description
+    Test etcFiles functionality.
+    Similar to foamEtcFile script, but automatically prunes nonexistent
+    directories from the list.
+
+\*---------------------------------------------------------------------------*/
+
+#include "argList.H"
+#include "etcFiles.H"
+
+using namespace Foam;
+
+void printList(const fileNameList& list)
+{
+    forAll(list, i)
+    {
+        Info<< list[i].c_str() << nl;
+    }
+}
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+// Main program:
+
+int main(int argc, char *argv[])
+{
+    argList::noBanner();
+    argList::noParallel();
+    argList::noFunctionObjects();
+    argList::removeOption("case");
+
+    argList::addBoolOption
+    (
+        "all",
+        "Return all files (otherwise stop after the first match)"
+    );
+    argList::addBoolOption
+    (
+        "list",
+        "List directories or files to be checked"
+    );
+    argList::validArgs.insert("file...");
+
+    argList::addNote
+    (
+        "Locate user/group/other file with semantics similar to the "
+        "~OpenFOAM/fileName expansion."
+    );
+
+    argList args(argc, argv, false, true);
+
+    // First handle no parameters
+    if (args.size() == 1)
+    {
+        if (args.optionFound("list"))
+        {
+            fileNameList results = findEtcDirs();
+            printList(results);
+            return 0;
+        }
+        else
+        {
+            Info<<"Error: Missing filename" << endl;
+            args.printUsage();
+            return 1;
+        }
+    }
+
+    const bool listAll = (args.optionFound("all") || args.optionFound("list"));
+
+    int error = 0;
+
+    for (int argi = 1; argi < args.size(); ++argi)
+    {
+        const std::string file = args[argi];
+        fileNameList results = findEtcFiles(file);
+
+        if (results.empty())
+        {
+            Info<<"Not found: " << file << nl;
+            error = 2;
+        }
+        else if (listAll)
+        {
+            printList(results);
+        }
+        else
+        {
+            Info<<results[0].c_str() << nl;
+        }
+    }
+
+    return error;
+}
+
+
+// ************************************************************************* //

applications/test/labelRanges/Test-labelRanges.C

@@ -28,10 +28,6 @@ Description
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
-#include "IOobject.H"
-#include "IOstreams.H"
-#include "IFstream.H"
-#include "IStringStream.H"
 #include "labelRanges.H"
 
 using namespace Foam;
@@ -42,6 +38,7 @@ using namespace Foam;
 int main(int argc, char *argv[])
 {
     argList::noParallel();
+    argList::noFunctionObjects();
     argList::validArgs.insert("start size .. startN sizeN");
     argList::addOption("verbose");
     argList::addNote
@@ -57,6 +54,34 @@ int main(int argc, char *argv[])
         labelRange::debug = 1;
     }
 
+    {
+        Info<<"test sorting" << endl;
+        DynamicList<labelRange> list1(10);
+        list1.append(labelRange(25, 8));
+        list1.append(labelRange::identity(8));
+        list1.append(labelRange(15, 5));
+        list1.append(labelRange(50, -10));
+
+        sort(list1);
+        Info<<"sorted" << list1 << endl;
+    }
+
+    {
+        Info<<"test intersections" << endl;
+        labelRange range1(-15, 25);
+        labelRange range2(7, 8);
+        labelRange range3(-20, 8);
+        labelRange range4(50, 8);
+
+        Info<<range1 << " & " << range2
+            << " = " << range1.subset(range2) << nl;
+
+        Info<< range1 << " & " << range3
+            << " = " << range1.subset(range3) << nl;
+
+        Info<< range2 << " & " << range4
+            << " = " << range2.subset(range4) << nl;
+    }
 
     labelRange range;
     labelRanges ranges;
@@ -76,12 +101,9 @@ int main(int argc, char *argv[])
         }
 
         {
-            label start = 0;
-            label size  = 0;
-
-            IStringStream(args[argI])() >> start;
+            label start = args.argRead<label>(argI);
+            label size  = args.argRead<label>(argI+1);
             ++argI;
-            IStringStream(args[argI])() >> size;
 
             range.reset(start, size);
         }
@@ -90,9 +112,9 @@ int main(int argc, char *argv[])
         if (removeMode)
         {
             Info<< "del " << range << " :";
-            forAllConstIter(labelRange, range, iter)
+            for (auto i : range)
             {
-                Info<< " " << iter();
+                Info<< " " << i;
             }
             Info<< nl;
 
@@ -101,9 +123,9 @@ int main(int argc, char *argv[])
         else
         {
             Info<< "add " << range  << " :";
-            forAllConstIter(labelRange, range, iter)
+            for (auto i : range)
             {
-                Info<< " " << iter();
+                Info<< " " << i;
             }
             Info<< nl;
 

applications/test/nullObject/Make/files

@@ -1,3 +1,3 @@
 Test-nullObject.C
 
-EXE = $(FOAM_USER_APPBIN)/nullObject
+EXE = $(FOAM_USER_APPBIN)/Test-nullObject

applications/test/nullObject/Test-nullObject.C

@@ -21,6 +21,17 @@ int main()
     SimpleClass* ptrToClass = new SimpleClass;
     SimpleClass& refToClass(*ptrToClass);
 
+    typedef unsigned long ptrval;
+
+    Info<<"nullObject address=" << ptrval(&(nullObjectPtr)) << endl;
+    Info<<"sizeof(nullObject)" << " == "
+        << sizeof(NullObject::nullObject)
+        << " vs. sizeof(void*)" << " == " << sizeof(void*)
+        << endl;
+
+    Info<<"nullObject pointer:" << ptrval(nullObjectPtr->pointer()) << endl;
+    Info<<"nullObject value:"   << nullObjectPtr->value() << endl;
+
     if (notNull(ptrToClass))
     {
         Info<< "Pass: ptrToClass is not null" << endl;

applications/test/pTraits/Test-pTraits.C

@@ -29,6 +29,9 @@ Description
 #include "pTraits.H"
 #include "vector.H"
 #include "tensor.H"
+#include "uLabel.H"
+
+#include <type_traits>
 
 using namespace Foam;
 
@@ -40,7 +43,10 @@ void printTraits()
 {
     Info<< pTraits<T>::typeName
         << ": zero=" << pTraits<T>::zero
-        << " one=" << pTraits<T>::one << endl;
+        << " one=" << pTraits<T>::one
+        << " integral=" << std::is_integral<T>::value
+        << " floating=" << std::is_floating_point<T>::value
+        << endl;
 }
 
 
@@ -51,6 +57,9 @@ void printTraits(const pTraits<T>& p)
 }
 
 
+#pragma GCC diagnostic warning "-Wmaybe-uninitialized"
+#pragma GCC diagnostic warning "-Wuninitialized"
+
 int main()
 {
     printTraits<bool>();
@@ -71,6 +80,27 @@ int main()
 
     printTraits(pTraits<scalar>(3.14159));
 
+    label abc;
+    Info<< "unintialized primitive:"<< abc << endl;
+
+    label def = label();
+    Info<< "intialized primitive:"<< def << endl;
+
+    Info<< nl << "some interesting label limits:" << nl;
+    std::cout<< "sizeof = " << sizeof(label) << nl;
+    std::cout<< "min = " << pTraits<label>::min << nl;
+    std::cout<< "max = " << pTraits<label>::max << nl;
+    std::cout<< "umax = " << pTraits<uLabel>::max << nl;
+
+    std::cout<< "max_2 = " << pTraits<label>::max/2 << " == "
+        << (1 << (sizeof(label)*8-2)) << nl;
+
+    std::cout<< "max_4 = " << pTraits<label>::max/4 << " == "
+        << (1 << (sizeof(label)*8-3)) << nl;
+
+    std::cout<< "max_8 = " << pTraits<label>::max/8 << " == "
+        << (1 << (sizeof(label)*8-4)) << nl;
+
     Info<< "End\n" << endl;
 
     return 0;

applications/test/vectorTools/Make/options

@@ -1 +1 @@
-EXE_INC = -I$(FOAM_APP)/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/vectorTools
+EXE_INC = -I$(FOAM_UTILITIES)/mesh/generation/foamyMesh/conformalVoronoiMesh/vectorTools

applications/utilities/mesh/advanced/refineWallLayer/refineWallLayer.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-     \\/     M anipulation  | Copyright (C) 2016 OpenCFD Ltd.
+     \\/     M anipulation  | Copyright (C) 2016-2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -62,7 +62,6 @@ using namespace Foam;
 int main(int argc, char *argv[])
 {
     #include "addOverwriteOption.H"
-    argList::noParallel();
     argList::validArgs.append("patches");
     argList::validArgs.append("edgeFraction");
 

applications/utilities/mesh/conversion/Optional/Allwmake

@@ -22,8 +22,11 @@ fi
 # Build libccmio (.a|.so) - use static linkage for fewer issues
 $WM_THIRD_PARTY_DIR/makeCCMIO lib
 
+: ${FOAM_EXT_LIBBIN:=/usr/lib$WM_COMPILER_LIB_ARCH}  # Extra safety
+export FOAM_EXT_LIBBIN
+
 if [ -e $CCMIO_ARCH_PATH/include/libccmio/ccmio.h \
-  -a \( -e $CCMIO_ARCH_PATH/lib/libccmio.a -o $FOAM_EXT_LIBBIN/libccmio.so \) ]
+  -a \( -e $CCMIO_ARCH_PATH/lib/libccmio.a -o -e $FOAM_EXT_LIBBIN/libccmio.so \) ]
 then
     wmake $targetType ccm26ToFoam
 else

applications/utilities/mesh/conversion/ideasUnvToFoam/ideasUnvToFoam.C

@@ -925,8 +925,8 @@ int main(int argc, char *argv[])
         }
     }
 
-    HashTable<labelList,word> cellZones;
-    HashTable<labelList,word> faceZones;
+    HashTable<labelList> cellZones;
+    HashTable<labelList> faceZones;
     List<bool> isAPatch(patchNames.size(),true);
 
     if (dofVertIndices.size())

applications/utilities/mesh/generation/foamyMesh/cellSizeAndAlignmentGrid/cellSizeAndAlignmentGrid.C

@@ -62,7 +62,7 @@ Foam::tmp<Foam::Field<Type>> filterFarPoints
 )
 {
     tmp<Field<Type>> tNewField(new Field<Type>(field.size()));
-    Field<Type>& newField = tNewField();
+    Field<Type>& newField = tNewField.ref();
 
     label added = 0;
     label count = 0;
@@ -160,7 +160,7 @@ Foam::tmp<Foam::triadField> buildAlignmentField(const T& mesh)
     (
         new triadField(mesh.vertexCount(), triad::unset)
     );
-    triadField& alignments = tAlignments();
+    triadField& alignments = tAlignments.ref();
 
     for
     (
@@ -188,7 +188,7 @@ Foam::tmp<Foam::pointField> buildPointField(const T& mesh)
     (
         new pointField(mesh.vertexCount(), point(GREAT, GREAT, GREAT))
     );
-    pointField& points = tPoints();
+    pointField& points = tPoints.ref();
 
     for
     (

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/DelaunayMesh/DelaunayMesh.C

@@ -24,7 +24,8 @@ License
 \*---------------------------------------------------------------------------*/
 
 #include "DelaunayMesh.H"
-#include "labelPair.H"
+#include "polyMesh.H"
+#include "labelPairHashes.H"
 #include "PrintTable.H"
 #include "pointIOField.H"
 #include "scalarIOField.H"

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/DelaunayMesh/DelaunayMesh.H

@@ -37,9 +37,7 @@ SourceFiles
 #ifndef DelaunayMesh_H
 #define DelaunayMesh_H
 
-#include "Pair.H"
-#include "HashSet.H"
-#include "FixedList.H"
+#include "labelPairHashes.H"
 #include "boundBox.H"
 #include "indexedVertex.H"
 #include "CGALTriangulation3Ddefs.H"
@@ -77,20 +75,6 @@ public:
         typedef typename Triangulation::Finite_facets_iterator
             Finite_facets_iterator;
 
-        typedef HashSet
-        <
-           Pair<label>,
-           FixedList<label, 2>::Hash<>
-        > labelPairHashSet;
-
-        typedef HashTable
-        <
-            label,
-            labelPair,
-            FixedList<label, 2>::Hash<>
-        > labelTolabelPairHashTable;
-
-
 private:
 
     // Private data
@@ -263,7 +247,7 @@ public:
             autoPtr<polyMesh> createMesh
             (
                 const fileName& name,
-                labelTolabelPairHashTable& vertexMap,
+                labelPairLookup& vertexMap,
                 labelList& cellMap,
                 const bool writeDelaunayData = true
             ) const;

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/DelaunayMesh/DelaunayMeshIO.C

@@ -337,7 +337,7 @@ Foam::autoPtr<Foam::polyMesh>
 Foam::DelaunayMesh<Triangulation>::createMesh
 (
     const fileName& name,
-    labelTolabelPairHashTable& vertexMap,
+    labelPairLookup& vertexMap,
     labelList& cellMap,
     const bool writeDelaunayData
 ) const

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/DelaunayMesh/DistributedDelaunayMesh.C

@@ -31,9 +31,6 @@ License
 #include "indexedVertexEnum.H"
 #include "IOmanip.H"
 
-// * * * * * * * * * * * * * * Static Data Members * * * * * * * * * * * * * //
-
-
 // * * * * * * * * * * * * Static Member Functions * * * * * * * * * * * * * //
 
 template<class Triangulation>
@@ -539,13 +536,7 @@ Foam::label Foam::DistributedDelaunayMesh<Triangulation>::referVertices
 
     if (!pointsNotInserted.empty())
     {
-        for
-        (
-            typename labelPairHashSet::const_iterator iter
-                = pointsNotInserted.begin();
-            iter != pointsNotInserted.end();
-            ++iter
-        )
+        forAllConstIters(pointsNotInserted, iter)
         {
             if (receivedVertices.found(iter.key()))
             {
@@ -863,7 +854,7 @@ void Foam::DistributedDelaunayMesh<Triangulation>::sync(const boundBox& bb)
 
 template<class Triangulation>
 template<class PointIterator>
-typename Foam::DistributedDelaunayMesh<Triangulation>::labelPairHashSet
+Foam::labelPairHashSet
 Foam::DistributedDelaunayMesh<Triangulation>::rangeInsertReferredWithInfo
 (
     PointIterator begin,

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/DelaunayMesh/DistributedDelaunayMesh.H

@@ -71,10 +71,6 @@ public:
         typedef typename Triangulation::All_cells_iterator
             All_cells_iterator;
 
-        typedef typename DelaunayMesh<Triangulation>::labelPairHashSet
-            labelPairHashSet;
-
-
 private:
 
         autoPtr<List<boundBox>> allBackgroundMeshBounds_;
@@ -193,12 +189,6 @@ public:
             bool printErrors = true
         );
 
-//        distributeField();
-
-
-    // Queries
-
-
 };
 
 

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/cellShapeControl/cellShapeControlMesh/cellShapeControlMesh.C

@@ -635,7 +635,7 @@ void Foam::cellShapeControlMesh::write() const
         }
     }
 
-    DelaunayMesh<CellSizeDelaunay>::labelTolabelPairHashTable vertexMap;
+    labelPairLookup vertexMap;
     labelList cellMap;
 
     autoPtr<polyMesh> meshPtr = DelaunayMesh<CellSizeDelaunay>::createMesh

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/cellShapeControl/smoothAlignmentSolver/smoothAlignmentSolver.C

@@ -35,7 +35,7 @@ Foam::tmp<Foam::Field<Type>> Foam::smoothAlignmentSolver::filterFarPoints
 )
 {
     tmp<Field<Type>> tNewField(new Field<Type>(field.size()));
-    Field<Type>& newField = tNewField();
+    Field<Type>& newField = tNewField.ref();
 
     label added = 0;
     label count = 0;

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H

@@ -105,7 +105,7 @@ public:
     typedef Delaunay::Facet            Facet;
     typedef Delaunay::Point            Point;
 
-    typedef List<DynamicList<Pair<labelPair>>> labelPairPairDynListList;
+    typedef List<DynamicList<labelPairPair>>     labelPairPairDynListList;
 
     typedef Tuple2<pointIndexHit, label>         pointIndexHitAndFeature;
     typedef List<pointIndexHitAndFeature>        pointIndexHitAndFeatureList;
@@ -706,7 +706,7 @@ private:
         (
             labelList& owner,
             labelList& neighbour,
-            const HashSet<labelPair, labelPair::Hash<>>& deferredCollapseFaces
+            const labelPairHashSet& deferredCollapseFaces
         ) const;
 
         //- Check whether the cell sizes are fine enough. Creates a polyMesh.

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMeshCalcDualMesh.C

@@ -673,7 +673,7 @@ void Foam::conformalVoronoiMesh::deferredCollapseFaceSet
 (
     labelList& owner,
     labelList& neighbour,
-    const HashSet<labelPair, labelPair::Hash<>>& deferredCollapseFaces
+    const labelPairHashSet& deferredCollapseFaces
 ) const
 {
     DynamicList<label> faceLabels;
@@ -2131,14 +2131,14 @@ void Foam::conformalVoronoiMesh::createFacesOwnerNeighbourAndPatches
                             // Use this processor's vertex index as the master
                             // for sorting
 
-                            DynamicList<Pair<labelPair>>& sortingIndex =
+                            DynamicList<labelPairPair>& sortingIndex =
                                 procPatchSortingIndex[patchIndex];
 
                             if (vB->internalOrBoundaryPoint() && vB->referred())
                             {
                                 sortingIndex.append
                                 (
-                                    Pair<labelPair>
+                                    labelPairPair
                                     (
                                         labelPair(vA->index(), vA->procIndex()),
                                         labelPair(vB->index(), vB->procIndex())
@@ -2149,7 +2149,7 @@ void Foam::conformalVoronoiMesh::createFacesOwnerNeighbourAndPatches
                             {
                                 sortingIndex.append
                                 (
-                                    Pair<labelPair>
+                                    labelPairPair
                                     (
                                         labelPair(vB->index(), vB->procIndex()),
                                         labelPair(vA->index(), vA->procIndex())
@@ -2162,14 +2162,14 @@ void Foam::conformalVoronoiMesh::createFacesOwnerNeighbourAndPatches
                             // Use the other processor's vertex index as the
                             // master for sorting
 
-                            DynamicList<Pair<labelPair>>& sortingIndex =
+                            DynamicList<labelPairPair>& sortingIndex =
                                 procPatchSortingIndex[patchIndex];
 
                             if (vA->internalOrBoundaryPoint() && vA->referred())
                             {
                                 sortingIndex.append
                                 (
-                                    Pair<labelPair>
+                                    labelPairPair
                                     (
                                         labelPair(vA->index(), vA->procIndex()),
                                         labelPair(vB->index(), vB->procIndex())
@@ -2180,7 +2180,7 @@ void Foam::conformalVoronoiMesh::createFacesOwnerNeighbourAndPatches
                             {
                                 sortingIndex.append
                                 (
-                                    Pair<labelPair>
+                                    labelPairPair
                                     (
                                         labelPair(vB->index(), vB->procIndex()),
                                         labelPair(vA->index(), vA->procIndex())
@@ -2463,7 +2463,7 @@ void Foam::conformalVoronoiMesh::sortProcPatches
         faceList& faces = patchFaces[patchi];
         labelList& owner = patchOwners[patchi];
         DynamicList<label>& slaves = patchPointPairSlaves[patchi];
-        DynamicList<Pair<labelPair>>& sortingIndices
+        DynamicList<labelPairPair>& sortingIndices
             = patchSortingIndices[patchi];
 
         if (!sortingIndices.empty())

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMeshI.H

@@ -293,9 +293,9 @@ inline Foam::point Foam::conformalVoronoiMesh::perturbPoint
 
     scalar pert = 1e-12*defaultCellSize();
 
-    perturbedPt.x() += pert*(rndGen_.scalar01() - 0.5);
-    perturbedPt.y() += pert*(rndGen_.scalar01() - 0.5);
-    perturbedPt.z() += pert*(rndGen_.scalar01() - 0.5);
+    perturbedPt.x() += pert*(rndGen_.sample01<scalar>() - 0.5);
+    perturbedPt.y() += pert*(rndGen_.sample01<scalar>() - 0.5);
+    perturbedPt.z() += pert*(rndGen_.sample01<scalar>() - 0.5);
 
     return perturbedPt;
 }

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMeshIO.C

@@ -199,7 +199,7 @@ void Foam::conformalVoronoiMesh::writeMesh(const fileName& instance)
 
         Info<< nl << "Writing " << "tetDualMesh" << endl;
 
-        DistributedDelaunayMesh<Delaunay>::labelTolabelPairHashTable vertexMap;
+        labelPairLookup vertexMap;
         labelList cellMap;
         autoPtr<polyMesh> tetMesh =
             createMesh("tetDualMesh", vertexMap, cellMap);

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C

@@ -553,11 +553,11 @@ bool Foam::autoDensity::fillBox
                       + vector
                         (
                             delta.x()
-                           *(i + 0.5 + 0.1*(rndGen().scalar01() - 0.5)),
+                           *(i + 0.5 + 0.1*(rndGen().sample01<scalar>() - 0.5)),
                             delta.y()
-                           *(j + 0.5 + 0.1*(rndGen().scalar01() - 0.5)),
+                           *(j + 0.5 + 0.1*(rndGen().sample01<scalar>() - 0.5)),
                             delta.z()
-                           *(k + 0.5 + 0.1*(rndGen().scalar01() - 0.5))
+                           *(k + 0.5 + 0.1*(rndGen().sample01<scalar>() - 0.5))
                         );
                 }
             }
@@ -662,7 +662,7 @@ bool Foam::autoDensity::fillBox
                 // TODO - is there a lot of cost in the 1/density calc?  Could
                 // assess on
                 //    (1/maxDensity)/(1/localDensity) = minVolume/localVolume
-                if (localDensity/maxDensity > rndGen().scalar01())
+                if (localDensity/maxDensity > rndGen().sample01<scalar>())
                 {
                     scalar localVolume = 1/localDensity;
 
@@ -675,7 +675,7 @@ bool Foam::autoDensity::fillBox
                         scalar addProbability =
                            (totalVolume - volumeAdded)/localVolume;
 
-                        scalar r = rndGen().scalar01();
+                        scalar r = rndGen().sample01<scalar>();
 
                         if (debug)
                         {
@@ -729,7 +729,7 @@ bool Foam::autoDensity::fillBox
         {
             trialPoints++;
 
-            point p = min + cmptMultiply(span, rndGen().vector01());
+            point p = min + cmptMultiply(span, rndGen().sample01<vector>());
 
             scalar localSize = cellShapeControls().cellSize(p);
 
@@ -785,7 +785,7 @@ bool Foam::autoDensity::fillBox
 
                 // Accept possible placements proportional to the relative local
                 // density
-                if (localDensity/maxDensity > rndGen().scalar01())
+                if (localDensity/maxDensity > rndGen().sample01<scalar>())
                 {
                     scalar localVolume = 1/localDensity;
 
@@ -798,7 +798,7 @@ bool Foam::autoDensity::fillBox
                         scalar addProbability =
                             (totalVolume - volumeAdded)/localVolume;
 
-                        scalar r = rndGen().scalar01();
+                        scalar r = rndGen().sample01<scalar>();
 
                         if (debug)
                         {

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/bodyCentredCubic/bodyCentredCubic.C

@@ -129,9 +129,9 @@ List<Vb::Point> bodyCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    pA.x() += pert*(rndGen().scalar01() - 0.5);
-                    pA.y() += pert*(rndGen().scalar01() - 0.5);
-                    pA.z() += pert*(rndGen().scalar01() - 0.5);
+                    pA.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    pA.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    pA.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())
@@ -150,9 +150,9 @@ List<Vb::Point> bodyCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    pB.x() += pert*(rndGen().scalar01() - 0.5);
-                    pB.y() += pert*(rndGen().scalar01() - 0.5);
-                    pB.z() += pert*(rndGen().scalar01() - 0.5);
+                    pB.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    pB.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    pB.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/faceCentredCubic/faceCentredCubic.C

@@ -127,9 +127,9 @@ List<Vb::Point> faceCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    p.x() += pert*(rndGen().scalar01() - 0.5);
-                    p.y() += pert*(rndGen().scalar01() - 0.5);
-                    p.z() += pert*(rndGen().scalar01() - 0.5);
+                    p.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())
@@ -155,9 +155,9 @@ List<Vb::Point> faceCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    p.x() += pert*(rndGen().scalar01() - 0.5);
-                    p.y() += pert*(rndGen().scalar01() - 0.5);
-                    p.z() += pert*(rndGen().scalar01() - 0.5);
+                    p.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())
@@ -183,9 +183,9 @@ List<Vb::Point> faceCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    p.x() += pert*(rndGen().scalar01() - 0.5);
-                    p.y() += pert*(rndGen().scalar01() - 0.5);
-                    p.z() += pert*(rndGen().scalar01() - 0.5);
+                    p.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())
@@ -211,9 +211,9 @@ List<Vb::Point> faceCentredCubic::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    p.x() += pert*(rndGen().scalar01() - 0.5);
-                    p.y() += pert*(rndGen().scalar01() - 0.5);
-                    p.z() += pert*(rndGen().scalar01() - 0.5);
+                    p.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if (Pstream::parRun())

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/pointFile/pointFile.C

@@ -198,9 +198,15 @@ List<Vb::Point> pointFile::initialPoints() const
 
             if (randomiseInitialGrid_)
             {
-                p.x() += randomPerturbationCoeff_*(rndGen().scalar01() - 0.5);
-                p.y() += randomPerturbationCoeff_*(rndGen().scalar01() - 0.5);
-                p.z() += randomPerturbationCoeff_*(rndGen().scalar01() - 0.5);
+                p.x() +=
+                    randomPerturbationCoeff_
+                   *(rndGen().sample01<scalar>() - 0.5);
+                p.y() +=
+                    randomPerturbationCoeff_
+                   *(rndGen().sample01<scalar>() - 0.5);
+                p.z() +=
+                    randomPerturbationCoeff_
+                   *(rndGen().sample01<scalar>() - 0.5);
             }
 
             initialPoints.append(Vb::Point(p.x(), p.y(), p.z()));

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/rayShooting/rayShooting.C

@@ -86,9 +86,9 @@ void rayShooting::splitLine
         {
             Foam::point newPt
             (
-                midPoint.x() + pert*(rndGen().scalar01() - 0.5),
-                midPoint.y() + pert*(rndGen().scalar01() - 0.5),
-                midPoint.z() + pert*(rndGen().scalar01() - 0.5)
+                midPoint.x() + pert*(rndGen().sample01<scalar>() - 0.5),
+                midPoint.y() + pert*(rndGen().sample01<scalar>() - 0.5),
+                midPoint.z() + pert*(rndGen().sample01<scalar>() - 0.5)
             );
 
             if

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/uniformGrid/uniformGrid.C

@@ -128,9 +128,9 @@ List<Vb::Point> uniformGrid::initialPoints() const
 
                 if (randomiseInitialGrid_)
                 {
-                    p.x() += pert*(rndGen().scalar01() - 0.5);
-                    p.y() += pert*(rndGen().scalar01() - 0.5);
-                    p.z() += pert*(rndGen().scalar01() - 0.5);
+                    p.x() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.y() += pert*(rndGen().sample01<scalar>() - 0.5);
+                    p.z() += pert*(rndGen().sample01<scalar>() - 0.5);
                 }
 
                 if

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/pointPairs/pointPairs.C

@@ -28,7 +28,7 @@ License
 // * * * * * * * * * * * * Private Member Functions  * * * * * * * * * * * * //
 
 template<class Triangulation>
-inline Foam::Pair<Foam::labelPair>
+inline Foam::labelPairPair
 Foam::pointPairs<Triangulation>::orderPointPair
 (
     const labelPair& vA,
@@ -38,8 +38,8 @@ Foam::pointPairs<Triangulation>::orderPointPair
     return
     (
         (vA < vB)
-      ? Pair<labelPair>(vA, vB)
-      : Pair<labelPair>(vB, vA)
+      ? labelPairPair(vA, vB)
+      : labelPairPair(vB, vA)
     );
 }
 
@@ -85,7 +85,7 @@ inline bool Foam::pointPairs<Triangulation>::insertPointPair
 template<class Triangulation>
 Foam::pointPairs<Triangulation>::pointPairs(const Triangulation& triangulation)
 :
-    ptPairTable(),
+    StorageContainer(),
     triangulation_(triangulation)
 {}
 
@@ -181,7 +181,7 @@ void Foam::pointPairs<Triangulation>::reIndex(const Map<label>& oldToNewIndices)
 
     forAllConstIter(pointPairs, *this, iter)
     {
-        Pair<labelPair> e = iter.key();
+        labelPairPair e = iter.key();
 
         labelPair& start = e.first();
         labelPair& end = e.second();

applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/pointPairs/pointPairs.H

@@ -39,20 +39,13 @@ Description
 #ifndef pointPairs_H
 #define pointPairs_H
 
-#include "labelPair.H"
-#include "HashSet.H"
+#include "labelPairHashes.H"
 
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 namespace Foam
 {
 
-typedef HashSet
-<
-    Pair<labelPair>,
-    FixedList<labelPair, 2>::Hash<>
-> ptPairTable;
-
 /*---------------------------------------------------------------------------*\
                          Class pointPairs Declaration
 \*---------------------------------------------------------------------------*/
@@ -60,10 +53,11 @@ typedef HashSet
 template<class Triangulation>
 class pointPairs
 :
-    public ptPairTable
+    public HashSet<labelPairPair, labelPairPair::Hash<>>
 {
     // Private typedefs
 
+    typedef HashSet<labelPairPair, labelPairPair::Hash<>> StorageContainer;
     typedef typename Triangulation::Vertex_handle Vertex_handle;
 
 
@@ -74,7 +68,7 @@ class pointPairs
 
     // Private Member Functions
 
-        inline Pair<labelPair> orderPointPair
+        inline labelPairPair orderPointPair
         (
             const labelPair& vA,
             const labelPair& vB

applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C

@@ -264,8 +264,8 @@ void Foam::CV2D::insertGrid()
 
             if (meshControls().randomiseInitialGrid())
             {
-                p.x() += pert*(rndGen.scalar01() - 0.5);
-                p.y() += pert*(rndGen.scalar01() - 0.5);
+                p.x() += pert*(rndGen.sample01<scalar>() - 0.5);
+                p.y() += pert*(rndGen.sample01<scalar>() - 0.5);
             }
 
             if (qSurf_.wellInside(p, 0.5*meshControls().minCellSize2()))

applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/Make/options

@@ -8,7 +8,7 @@ EXE_INC = \
     ${EXE_NDEBUG} \
     ${CGAL_INC} \
     ${c++LESSWARN} \
-    -I$(FOAM_APP)/utilities/mesh/generation/extrude2DMesh/extrude2DMesh/lnInclude \
+    -I$(FOAM_UTILITIES)/mesh/generation/extrude2DMesh/extrude2DMesh/lnInclude \
     -I../conformalVoronoi2DMesh/lnInclude \
     -I../conformalVoronoiMesh/lnInclude \
     -I$(LIB_SRC)/parallel/decompose/decompositionMethods/lnInclude \

applications/utilities/mesh/generation/snappyHexMesh/snappyHexMesh.C

@@ -2,8 +2,8 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2011-2017 OpenFOAM Foundation
-     \\/     M anipulation  | Copyright (C) 2015-2016 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
+     \\/     M anipulation  | Copyright (C) 2015-2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -660,7 +660,7 @@ void writeMesh
     Info<< "Writing mesh to time " << meshRefiner.timeName() << endl;
 
     processorMeshes::removeFiles(mesh);
-    if (!debugLevel)
+    if (!debugLevel && !(writeLevel&meshRefinement::WRITELAYERSETS))
     {
         topoSet::removeFiles(mesh);
     }

applications/utilities/mesh/manipulation/checkMesh/Make/files

@@ -1,3 +1,4 @@
+writeFields.C
 checkTools.C
 checkTopology.C
 checkGeometry.C

applications/utilities/mesh/manipulation/checkMesh/checkMesh.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-     \\/     M anipulation  | Copyright (C) 2015 OpenCFD Ltd.
+     \\/     M anipulation  | Copyright (C) 2015-2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -57,12 +57,18 @@ Usage
     Reconstruct all cellSets and faceSets geometry and write to postProcessing/
     directory according to surfaceFormat (e.g. vtk or ensight)
 
+    \param -writeAllFields \n
+    Writes all mesh quality measures as fields.
+
+    \param -writeFields '(\<fieldName\>)' \n
+    Writes selected mesh quality measures as fields.
+
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
 #include "timeSelector.H"
 #include "Time.H"
-#include "polyMesh.H"
+#include "fvMesh.H"
 #include "globalMeshData.H"
 #include "surfaceWriter.H"
 #include "vtkSetWriter.H"
@@ -71,6 +77,7 @@ Usage
 #include "checkTopology.H"
 #include "checkGeometry.H"
 #include "checkMeshQuality.H"
+#include "writeFields.H"
 
 using namespace Foam;
 
@@ -96,6 +103,17 @@ int main(int argc, char *argv[])
         "include extra topology checks"
     );
     argList::addBoolOption
+    (
+        "writeAllFields",
+        "write volFields with mesh quality parameters"
+    );
+    argList::addOption
+    (
+        "writeFields",
+        "wordList",
+        "write volFields with selected mesh quality parameters"
+    );
+    argList::addBoolOption
     (
         "meshQuality",
         "read user-defined mesh quality criterions from system/meshQualityDict"
@@ -110,7 +128,7 @@ int main(int argc, char *argv[])
     #include "setRootCase.H"
     #include "createTime.H"
     instantList timeDirs = timeSelector::select0(runTime, args);
-    #include "createNamedPolyMesh.H"
+    #include "createNamedMesh.H"
 
     const bool noTopology  = args.optionFound("noTopology");
     const bool allGeometry = args.optionFound("allGeometry");
@@ -119,6 +137,24 @@ int main(int argc, char *argv[])
 
     word surfaceFormat;
     const bool writeSets = args.optionReadIfPresent("writeSets", surfaceFormat);
+    HashSet<word> selectedFields;
+    bool writeFields = args.optionReadIfPresent
+    (
+        "writeFields",
+        selectedFields
+    );
+    if (!writeFields && args.optionFound("writeAllFields"))
+    {
+        selectedFields.insert("nonOrthoAngle");
+        selectedFields.insert("faceWeight");
+        selectedFields.insert("skewness");
+        selectedFields.insert("cellDeterminant");
+        selectedFields.insert("aspectRatio");
+        selectedFields.insert("cellShapes");
+        selectedFields.insert("cellVolume");
+        selectedFields.insert("cellVolumeRatio");
+    }
+
 
     if (noTopology)
     {
@@ -143,6 +179,11 @@ int main(int argc, char *argv[])
             << " representation"
             << " of all faceSets and cellSets." << nl << endl;
     }
+    if (selectedFields.size())
+    {
+        Info<< "Writing mesh quality as fields " << selectedFields << nl
+            << endl;
+    }
 
 
     autoPtr<IOdictionary> qualDict;
@@ -234,6 +275,10 @@ int main(int argc, char *argv[])
                 Info<< "\nFailed " << nFailedChecks << " mesh checks.\n"
                     << endl;
             }
+
+
+            // Write selected fields
+            Foam::writeFields(mesh, selectedFields);
         }
         else if (state == polyMesh::POINTS_MOVED)
         {
@@ -262,6 +307,10 @@ int main(int argc, char *argv[])
             {
                 Info<< "\nMesh OK.\n" << endl;
             }
+
+
+            // Write selected fields
+            Foam::writeFields(mesh, selectedFields);
         }
     }
 

applications/utilities/mesh/manipulation/checkMesh/writeFields.C

@@ -0,0 +1,360 @@
+#include "writeFields.H"
+#include "volFields.H"
+#include "polyMeshTools.H"
+#include "zeroGradientFvPatchFields.H"
+#include "syncTools.H"
+
+using namespace Foam;
+
+void maxFaceToCell
+(
+    const scalarField& faceData,
+    volScalarField& cellData
+)
+{
+    const cellList& cells = cellData.mesh().cells();
+
+    scalarField& cellFld = cellData.ref();
+
+    cellFld = -GREAT;
+    forAll(cells, cellI)
+    {
+        const cell& cFaces = cells[cellI];
+        forAll(cFaces, i)
+        {
+            cellFld[cellI] = max(cellFld[cellI], faceData[cFaces[i]]);
+        }
+    }
+
+    forAll(cellData.boundaryField(), patchI)
+    {
+        fvPatchScalarField& fvp = cellData.boundaryFieldRef()[patchI];
+
+        fvp = fvp.patch().patchSlice(faceData);
+    }
+    cellData.correctBoundaryConditions();
+}
+
+
+void minFaceToCell
+(
+    const scalarField& faceData,
+    volScalarField& cellData
+)
+{
+    const cellList& cells = cellData.mesh().cells();
+
+    scalarField& cellFld = cellData.ref();
+
+    cellFld = GREAT;
+    forAll(cells, cellI)
+    {
+        const cell& cFaces = cells[cellI];
+        forAll(cFaces, i)
+        {
+            cellFld[cellI] = min(cellFld[cellI], faceData[cFaces[i]]);
+        }
+    }
+
+    forAll(cellData.boundaryField(), patchI)
+    {
+        fvPatchScalarField& fvp = cellData.boundaryFieldRef()[patchI];
+
+        fvp = fvp.patch().patchSlice(faceData);
+    }
+    cellData.correctBoundaryConditions();
+}
+
+
+void Foam::writeFields
+(
+    const fvMesh& mesh,
+    const HashSet<word>& selectedFields
+)
+{
+    if (selectedFields.empty())
+    {
+        return;
+    }
+
+    Info<< "Writing fields with mesh quality parameters" << endl;
+
+    if (selectedFields.found("nonOrthoAngle"))
+    {
+        //- Face based orthogonality
+        const scalarField faceOrthogonality
+        (
+            polyMeshTools::faceOrthogonality
+            (
+                mesh,
+                mesh.faceAreas(),
+                mesh.cellCentres()
+            )
+        );
+
+        //- Face based angle
+        const scalarField nonOrthoAngle
+        (
+            radToDeg
+            (
+                Foam::acos(min(1.0, faceOrthogonality))
+            )
+        );
+
+        //- Cell field - max of either face
+        volScalarField cellNonOrthoAngle
+        (
+            IOobject
+            (
+                "nonOrthoAngle",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE
+            ),
+            mesh,
+            dimensionedScalar("angle", dimless, 0),
+            calculatedFvPatchScalarField::typeName
+        );
+        //- Take max
+        maxFaceToCell(nonOrthoAngle, cellNonOrthoAngle);
+        Info<< "    Writing non-orthogonality (angle) to "
+            << cellNonOrthoAngle.name() << endl;
+        cellNonOrthoAngle.write();
+    }
+
+    if (selectedFields.found("faceWeight"))
+    {
+        const scalarField faceWeights
+        (
+            polyMeshTools::faceWeights
+            (
+                mesh,
+                mesh.faceCentres(),
+                mesh.faceAreas(),
+                mesh.cellCentres()
+            )
+        );
+
+        volScalarField cellWeights
+        (
+            IOobject
+            (
+                "faceWeight",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE
+            ),
+            mesh,
+            dimensionedScalar("weight", dimless, 0),
+            calculatedFvPatchScalarField::typeName
+        );
+        //- Take min
+        minFaceToCell(faceWeights, cellWeights);
+        Info<< "    Writing face interpolation weights (0..0.5) to "
+            << cellWeights.name() << endl;
+        cellWeights.write();
+    }
+
+
+    // Skewness
+    // ~~~~~~~~
+
+    if (selectedFields.found("skewness"))
+    {
+        //- Face based skewness
+        const scalarField faceSkewness
+        (
+            polyMeshTools::faceSkewness
+            (
+                mesh,
+                mesh.points(),
+                mesh.faceCentres(),
+                mesh.faceAreas(),
+                mesh.cellCentres()
+            )
+        );
+
+        //- Cell field - max of either face
+        volScalarField cellSkewness
+        (
+            IOobject
+            (
+                "skewness",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE
+            ),
+            mesh,
+            dimensionedScalar("skewness", dimless, 0),
+            calculatedFvPatchScalarField::typeName
+        );
+        //- Take max
+        maxFaceToCell(faceSkewness, cellSkewness);
+        Info<< "    Writing face skewness to " << cellSkewness.name() << endl;
+        cellSkewness.write();
+    }
+
+
+    // cellDeterminant
+    // ~~~~~~~~~~~~~~~
+
+    if (selectedFields.found("cellDeterminant"))
+    {
+        volScalarField cellDeterminant
+        (
+            IOobject
+            (
+                "cellDeterminant",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE,
+                false
+            ),
+            mesh,
+            dimensionedScalar("cellDeterminant", dimless, 0),
+            zeroGradientFvPatchScalarField::typeName
+        );
+        cellDeterminant.primitiveFieldRef() =
+            primitiveMeshTools::cellDeterminant
+            (
+                mesh,
+                mesh.geometricD(),
+                mesh.faceAreas(),
+                syncTools::getInternalOrCoupledFaces(mesh)
+            );
+        cellDeterminant.correctBoundaryConditions();
+        Info<< "    Writing cell determinant to "
+            << cellDeterminant.name() << endl;
+        cellDeterminant.write();
+    }
+
+
+    // Aspect ratio
+    // ~~~~~~~~~~~~
+    if (selectedFields.found("aspectRatio"))
+    {
+        volScalarField aspectRatio
+        (
+            IOobject
+            (
+                "aspectRatio",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE,
+                false
+            ),
+            mesh,
+            dimensionedScalar("aspectRatio", dimless, 0),
+            zeroGradientFvPatchScalarField::typeName
+        );
+
+
+        scalarField cellOpenness;
+        polyMeshTools::cellClosedness
+        (
+            mesh,
+            mesh.geometricD(),
+            mesh.faceAreas(),
+            mesh.cellVolumes(),
+            cellOpenness,
+            aspectRatio.ref()
+        );
+
+        aspectRatio.correctBoundaryConditions();
+        Info<< "    Writing aspect ratio to " << aspectRatio.name() << endl;
+        aspectRatio.write();
+    }
+
+
+    // cell type
+    // ~~~~~~~~~
+    if (selectedFields.found("cellShapes"))
+    {
+        volScalarField shape
+        (
+            IOobject
+            (
+                "cellShapes",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE,
+                false
+            ),
+            mesh,
+            dimensionedScalar("cellShapes", dimless, 0),
+            zeroGradientFvPatchScalarField::typeName
+        );
+        const cellShapeList& cellShapes = mesh.cellShapes();
+        forAll(cellShapes, cellI)
+        {
+            const cellModel& model = cellShapes[cellI].model();
+            shape[cellI] = model.index();
+        }
+        shape.correctBoundaryConditions();
+        Info<< "    Writing cell shape (hex, tet etc.) to " << shape.name()
+            << endl;
+        shape.write();
+    }
+
+    if (selectedFields.found("cellVolume"))
+    {
+        volScalarField V
+        (
+            IOobject
+            (
+                "cellVolume",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE,
+                false
+            ),
+            mesh,
+            dimensionedScalar("cellVolume", dimVolume, 0),
+            calculatedFvPatchScalarField::typeName
+        );
+        V.ref() = mesh.V();
+        Info<< "    Writing cell volume to " << V.name() << endl;
+        V.write();
+    }
+
+    if (selectedFields.found("cellVolumeRatio"))
+    {
+        const scalarField faceVolumeRatio
+        (
+            polyMeshTools::volRatio
+            (
+                mesh,
+                mesh.V()
+            )
+        );
+
+        volScalarField cellVolumeRatio
+        (
+            IOobject
+            (
+                "cellVolumeRatio",
+                mesh.time().timeName(),
+                mesh,
+                IOobject::NO_READ,
+                IOobject::AUTO_WRITE
+            ),
+            mesh,
+            dimensionedScalar("cellVolumeRatio", dimless, 0),
+            calculatedFvPatchScalarField::typeName
+        );
+        //- Take min
+        minFaceToCell(faceVolumeRatio, cellVolumeRatio);
+        Info<< "    Writing cell volume ratio to "
+            << cellVolumeRatio.name() << endl;
+        cellVolumeRatio.write();
+    }
+
+    Info<< endl;
+}

applications/utilities/mesh/manipulation/checkMesh/writeFields.H

@@ -0,0 +1,10 @@
+#include "fvMesh.H"
+
+namespace Foam
+{
+    void writeFields
+    (
+        const fvMesh&,
+        const HashSet<word>& selectedFields
+    );
+}

applications/utilities/mesh/manipulation/renumberMesh/Allwmake

@@ -12,11 +12,27 @@ then
     export LINK_FLAGS="${LINK_FLAGS} -lSloanRenumber"
 fi
 
-if [ -f "${ZOLTAN_ARCH_PATH}/lib/libzoltan.a" -a -f "${FOAM_LIBBIN}/libzoltanRenumber.so" ]
+if [ -f "${FOAM_LIBBIN}/libzoltanRenumber.so" ]
 then
-    echo "    found libzoltanRenumber  --  enabling sloan renumbering support."
+    if [ -z "$ZOLTAN_ARCH_PATH" ]
+    then
+        # Optional: get ZOLTAN_ARCH_PATH
+        if settings=$($WM_PROJECT_DIR/bin/foamEtcFile config.sh/zoltan)
+        then
+            . $settings
+        fi
+    fi
+
+    for libdir in lib "lib${WM_COMPILER_LIB_ARCH}"
+    do
+        if [ -f "$ZOLTAN_ARCH_PATH/$libdir/libzoltan.a" ]
+        then
+            echo "    found libzoltanRenumber  --  enabling zoltan renumbering support."
             export COMP_FLAGS="-DFOAM_USE_ZOLTAN"
-    export LINK_FLAGS="${LINK_FLAGS} -lzoltanRenumber -L${ZOLTAN_ARCH_PATH}/lib -lzoltan"
+            export LINK_FLAGS="${LINK_FLAGS} -lzoltanRenumber -L$ZOLTAN_ARCH_PATH/$libdir -lzoltan"
+            break
+        fi
+    done
 fi
 
 wmake $targetType

applications/utilities/mesh/manipulation/stitchMesh/toleranceDict

@@ -15,7 +15,7 @@ FoamFile
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 // For complete details on what this dictionary file should provide, see
-//   $FOAM_SRC/src/dynamicMesh/slidingInterface/slidingInterface.C
+//   src/dynamicMesh/slidingInterface/slidingInterface.C
 //   method: Foam::slidingInterface::setTolerances
 
 //- Point merge tolerance

applications/utilities/mesh/manipulation/transformPoints/transformPoints.C

@@ -53,9 +53,9 @@ Usage
     it will also read & transform vector & tensor fields.
 
     Note:
-    yaw (rotation about z)
-    pitch (rotation about y)
     roll (rotation about x)
+    pitch (rotation about y)
+    yaw (rotation about z)
 
 \*---------------------------------------------------------------------------*/
 
@@ -143,6 +143,12 @@ void rotateFields(const argList& args, const Time& runTime, const tensor& T)
 
 int main(int argc, char *argv[])
 {
+    argList::addNote
+    (
+        "Transform (translate/rotate/scale) mesh points.\n"
+        "Note: roll=rotation about x, pitch=rotation about y, "
+        "yaw=rotation about z"
+    );
     argList::addOption
     (
         "translate",
@@ -160,13 +166,13 @@ int main(int argc, char *argv[])
     (
         "rollPitchYaw",
         "vector",
-        "transform in terms of '(roll pitch yaw)' in degrees"
+        "rotate by '(roll pitch yaw)' in degrees"
     );
     argList::addOption
     (
         "yawPitchRoll",
         "vector",
-        "transform in terms of '(yaw pitch roll)' in degrees"
+        "rotate by '(yaw pitch roll)' in degrees"
     );
     argList::addBoolOption
     (

applications/utilities/miscellaneous/foamDictionary/foamDictionary.C

@@ -112,6 +112,7 @@ Usage
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
+#include "profiling.H"
 #include "Time.H"
 #include "IFstream.H"
 #include "OFstream.H"
@@ -241,6 +242,7 @@ int main(int argc, char *argv[])
     argList::addNote("manipulates dictionaries");
 
     argList::noBanner();
+    argList::noJobInfo();
     argList::validArgs.append("dictionary");
     argList::addBoolOption("keywords", "list keywords");
     argList::addOption("entry", "name", "report/select the named entry");
@@ -288,6 +290,7 @@ int main(int argc, char *argv[])
         "disableFunctionEntries",
         "Disable expansion of dictionary directives - #include, #codeStream etc"
     );
+    profiling::disable(); // Disable profiling (and its output)
 
     argList args(argc, argv);
 

applications/utilities/miscellaneous/foamListTimes/foamListTimes.C

@@ -45,6 +45,7 @@ Usage
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
+#include "profiling.H"
 #include "timeSelector.H"
 #include "Time.H"
 
@@ -59,6 +60,7 @@ int main(int argc, char *argv[])
     timeSelector::addOptions(true, true);
     argList::noBanner();
     argList::noParallel();
+    argList::noJobInfo();
     argList::addBoolOption
     (
         "processor",
@@ -69,6 +71,8 @@ int main(int argc, char *argv[])
         "rm",
         "remove selected time directories"
     );
+    profiling::disable(); // Disable profiling (and its output)
+
     #include "setRootCase.H"
 
     label nProcs = 0;

applications/utilities/postProcessing/graphics/PVReaders/PVFoamReader/PVFoamReader/CMakeLists.txt

@@ -7,7 +7,6 @@ include(${PARAVIEW_USE_FILE})
 
 link_directories(
     $ENV{FOAM_LIBBIN}
-    $ENV{FOAM_EXT_LIBBIN}
 )
 
 include_directories(

applications/utilities/postProcessing/graphics/PVReaders/PVFoamReader/vtkPVFoam/vtkPVFoam.C

@@ -288,6 +288,9 @@ Foam::vtkPVFoam::vtkPVFoam
         fullCasePath = cwd();
     }
 
+    // The name of the executable, unless already present in the environment
+    setEnv("FOAM_EXECUTABLE", "paraview", false);
+
     // Set the case as an environment variable - some BCs might use this
     if (fullCasePath.name().find("processor", 0) == 0)
     {

applications/utilities/postProcessing/graphics/PVReaders/PVFoamReader/vtkPVFoam/vtkPVFoamUpdateInfo.C

@@ -233,21 +233,16 @@ void Foam::vtkPVFoam::updateInfoPatches
     if (meshPtr_)
     {
         const polyBoundaryMesh& patches = meshPtr_->boundaryMesh();
-        const HashTable<labelList, word>& groups = patches.groupPatchIDs();
+        const HashTable<labelList>& groups = patches.groupPatchIDs();
         const wordList allPatchNames = patches.names();
 
         // Add patch groups
         // ~~~~~~~~~~~~~~~~
 
-        for
-        (
-            HashTable<labelList, word>::const_iterator iter = groups.begin();
-            iter != groups.end();
-            ++iter
-        )
+        forAllConstIters(groups, iter)
         {
             const word& groupName = iter.key();
-            const labelList& patchIDs = iter();
+            const labelList& patchIDs = iter.object();
 
             label nFaces = 0;
             forAll(patchIDs, i)
@@ -349,7 +344,7 @@ void Foam::vtkPVFoam::updateInfoPatches
             // Add (non-zero) patch groups to the list of mesh parts
             // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-            HashTable<labelList, word> groups(patchEntries.size());
+            HashTable<labelList> groups(patchEntries.size());
 
             forAll(patchEntries, patchi)
             {
@@ -360,7 +355,7 @@ void Foam::vtkPVFoam::updateInfoPatches
 
                 forAll(groupNames, groupI)
                 {
-                    HashTable<labelList, word>::iterator iter = groups.find
+                    HashTable<labelList>::iterator iter = groups.find
                     (
                         groupNames[groupI]
                     );
@@ -375,16 +370,10 @@ void Foam::vtkPVFoam::updateInfoPatches
                 }
             }
 
-            for
-            (
-                HashTable<labelList, word>::const_iterator iter =
-                    groups.begin();
-                iter != groups.end();
-                ++iter
-            )
+            forAllConstIters(groups, iter)
             {
                 const word& groupName = iter.key();
-                const labelList& patchIDs = iter();
+                const labelList& patchIDs = iter.object();
 
                 label nFaces = 0;
                 forAll(patchIDs, i)

applications/utilities/postProcessing/graphics/PVReaders/PVblockMeshReader/PVblockMeshReader/CMakeLists.txt

@@ -7,7 +7,6 @@ include(${PARAVIEW_USE_FILE})
 
 link_directories(
     $ENV{FOAM_LIBBIN}
-    $ENV{FOAM_EXT_LIBBIN}
 )
 
 include_directories(

applications/utilities/postProcessing/graphics/PVReaders/PVblockMeshReader/vtkPVblockMesh/vtkPVblockMesh.C

@@ -206,6 +206,9 @@ Foam::vtkPVblockMesh::vtkPVblockMesh
         fullCasePath = cwd();
     }
 
+    // The name of the executable, unless already present in the environment
+    setEnv("FOAM_EXECUTABLE", "paraview", false);
+
     // Set the case as an environment variable - some BCs might use this
     if (fullCasePath.name().find("processor", 0) == 0)
     {

applications/utilities/postProcessing/lagrangian/steadyParticleTracks/steadyParticleTracks.C

@@ -45,7 +45,7 @@ Description
 #include "timeSelector.H"
 #include "OFstream.H"
 #include "passiveParticleCloud.H"
-
+#include "labelPairHashes.H"
 #include "SortableList.H"
 #include "IOobjectList.H"
 #include "PtrList.H"
@@ -133,8 +133,6 @@ int main(int argc, char *argv[])
     fileName vtkPath(runTime.path()/"VTK");
     mkDir(vtkPath);
 
-    typedef HashTable<label, labelPair, labelPair::Hash<>> trackTableType;
-
     forAll(timeDirs, timeI)
     {
         runTime.setTime(timeDirs[timeI], timeI);
@@ -168,13 +166,14 @@ int main(int argc, char *argv[])
         label nTracks = 0;
 
         {
-            trackTableType trackTable;
+            labelPairLookup trackTable;
+
             forAll(particles, i)
             {
                 const label origProc = particles[i].origProc();
                 const label origId = particles[i].origId();
 
-                const trackTableType::const_iterator& iter =
+                labelPairLookup::const_iterator iter =
                     trackTable.find(labelPair(origProc, origId));
 
                 if (iter == trackTable.end())

applications/utilities/postProcessing/miscellaneous/pdfPlot/createFields.H

@@ -20,7 +20,7 @@
     const fileName pdfPath = runTime.path()/"pdf";
     mkDir(pdfPath);
 
-    cachedRandom rndGen(label(0), -1);
+    Random rndGen;
 
     autoPtr<distributionModel> p
     (

applications/utilities/surface/surfaceBooleanFeatures/PolyhedronReader/Make/options

@@ -13,8 +13,8 @@ EXE_INC = \
     ${CGAL_INC} \
     ${c++CGALWARN} \
     -I.. \
-    -I$(FOAM_SRC)/surfMesh/lnInclude \
-    -I$(FOAM_SRC)/triSurface/lnInclude \
+    -I$(LIB_SRC)/surfMesh/lnInclude \
+    -I$(LIB_SRC)/triSurface/lnInclude \
     -I$(LIB_SRC)/edgeMesh/lnInclude \
     -I$(LIB_SRC)/meshTools/lnInclude \
     -I/usr/include/Qt

applications/utilities/surface/surfaceBooleanFeatures/surfaceBooleanFeatures.C

@@ -783,7 +783,7 @@ labelPair edgeIntersectionsAndShuffleCGAL
                     const edge& e = edges[edgeI];
                     forAll(e, eI)
                     {
-                        vector d = rndGen.vector01()-p05;
+                        vector d = rndGen.sample01<vector>() - p05;
                         surf1Points[mp[e[eI]]] += surf1PointTol[e[eI]]*d;
                     }
                 }

applications/utilities/surface/surfaceCoarsen/bunnylod/README

@@ -1,4 +1,3 @@
-
 Polygon Reduction Demo
 By Stan Melax (c) 1998
 mailto:melax@cs.ualberta.ca
@@ -8,5 +7,3 @@ The PC executable bunnylod.exe should run
 on a standard PC.
 Just run it and enjoy.
 Mouse dragging spins the rabbit.
-
-

applications/utilities/surface/surfaceFeatureExtract/surfaceFeatureExtract.C

@@ -87,73 +87,6 @@ scalar calcVertexNormalWeight
 }
 
 
-point randomPointInPlane(const plane& p)
-{
-    // Perturb base point
-    const point& refPt = p.refPoint();
-
-    // ax + by + cz + d = 0
-    const FixedList<scalar, 4>& planeCoeffs = p.planeCoeffs();
-
-    const scalar perturbX = refPt.x() + 1e-3;
-    const scalar perturbY = refPt.y() + 1e-3;
-    const scalar perturbZ = refPt.z() + 1e-3;
-
-    if (mag(planeCoeffs[2]) < SMALL)
-    {
-        if (mag(planeCoeffs[1]) < SMALL)
-        {
-            const scalar x =
-                -1.0
-                *(
-                     planeCoeffs[3]
-                   + planeCoeffs[1]*perturbY
-                   + planeCoeffs[2]*perturbZ
-                 )/planeCoeffs[0];
-
-            return point
-            (
-                x,
-                perturbY,
-                perturbZ
-            );
-        }
-
-        const scalar y =
-            -1.0
-            *(
-                 planeCoeffs[3]
-               + planeCoeffs[0]*perturbX
-               + planeCoeffs[2]*perturbZ
-             )/planeCoeffs[1];
-
-        return point
-        (
-            perturbX,
-            y,
-            perturbZ
-        );
-    }
-    else
-    {
-        const scalar z =
-            -1.0
-            *(
-                 planeCoeffs[3]
-               + planeCoeffs[0]*perturbX
-               + planeCoeffs[1]*perturbY
-             )/planeCoeffs[2];
-
-        return point
-        (
-            perturbX,
-            perturbY,
-            z
-        );
-    }
-}
-
-
 triadField calcVertexCoordSys
 (
     const triSurface& surf,
@@ -178,8 +111,8 @@ triadField calcVertexCoordSys
 
         plane p(pt, normal);
 
-        // Pick random point in plane
-        vector dir1 = pt - randomPointInPlane(p);
+        // Pick arbitrary point in plane
+        vector dir1 = pt - p.somePointInPlane(1e-3);
         dir1 /= mag(dir1);
 
         vector dir2 = dir1 ^ normal;

applications/utilities/surface/surfaceInertia/surfaceInertia.C

@@ -125,9 +125,9 @@ int main(int argc, char *argv[])
             << "No eigenValues found, shape may have symmetry, "
             << "perturbing inertia tensor diagonal" << endl;
 
-        J.xx() *= 1.0 + SMALL*rand.scalar01();
-        J.yy() *= 1.0 + SMALL*rand.scalar01();
-        J.zz() *= 1.0 + SMALL*rand.scalar01();
+        J.xx() *= 1.0 + SMALL*rand.sample01<scalar>();
+        J.yy() *= 1.0 + SMALL*rand.sample01<scalar>();
+        J.zz() *= 1.0 + SMALL*rand.sample01<scalar>();
 
         eVal = eigenValues(J);
 

applications/utilities/surface/surfaceInflate/Make/options

@@ -1,8 +1,7 @@
 EXE_INC = \
-    -I$(FOAM_SRC)/triSurface/lnInclude \
-    -I$(FOAM_SRC)/surfMesh/lnInclude \
-    -I$(FOAM_SRC)/meshTools/lnInclude
-
+    -I$(LIB_SRC)/triSurface/lnInclude \
+    -I$(LIB_SRC)/surfMesh/lnInclude \
+    -I$(LIB_SRC)/meshTools/lnInclude
 
 EXE_LIBS = \
     -ltriSurface \

applications/utilities/surface/surfaceMeshInfo/surfaceMeshInfo.C

@@ -62,6 +62,7 @@ Note
 \*---------------------------------------------------------------------------*/
 
 #include "argList.H"
+#include "profiling.H"
 #include "Time.H"
 
 #include "UnsortedMeshedSurfaces.H"
@@ -98,6 +99,7 @@ int main(int argc, char *argv[])
         "xml",
         "write output in XML format"
     );
+    profiling::disable(); // Disable profiling (and its output)
 
     argList args(argc, argv);
     Time runTime(args.rootPath(), args.caseName());

applications/utilities/surface/surfaceMeshTriangulate/surfaceMeshTriangulate.C

@@ -51,6 +51,7 @@ Description
 #include "uindirectPrimitivePatch.H"
 #include "globalMeshData.H"
 #include "globalIndex.H"
+#include "timeSelector.H"
 
 using namespace Foam;
 
@@ -63,6 +64,8 @@ int main(int argc, char *argv[])
     (
         "extract surface from a polyMesh"
     );
+    timeSelector::addOptions();
+
     argList::validArgs.append("output file");
     #include "addRegionOption.H"
     argList::addBoolOption
@@ -86,7 +89,14 @@ int main(int argc, char *argv[])
     #include "setRootCase.H"
     #include "createTime.H"
 
-    const fileName outFileName(args[1]);
+    const fileName userOutFileName(args[1]);
+
+    if (!userOutFileName.hasExt())
+    {
+        FatalErrorInFunction
+            << "Missing extension on output name " << userOutFileName
+            << exit(FatalError);
+    }
 
     Info<< "Extracting surface from boundaryMesh ..."
         << endl << endl;
@@ -106,10 +116,48 @@ int main(int argc, char *argv[])
         Info<< "Excluding all processor patches." << nl << endl;
     }
 
+
     Info<< "Reading mesh from time " << runTime.value() << endl;
 
     #include "createNamedPolyMesh.H"
 
+    // User specified times
+    instantList timeDirs = timeSelector::select0(runTime, args);
+
+    forAll(timeDirs, timeIndex)
+    {
+        runTime.setTime(timeDirs[timeIndex], timeIndex);
+        Info<< "Time [" << timeIndex << "] = " << runTime.timeName();
+
+        fileName outFileName;
+        if (timeDirs.size() == 1)
+        {
+            outFileName = userOutFileName;
+            Info<< nl;
+        }
+        else
+        {
+            polyMesh::readUpdateState meshState = mesh.readUpdate();
+            if (timeIndex && meshState == polyMesh::UNCHANGED)
+            {
+                Info<<"  ... no mesh change." << nl;
+                continue;
+            }
+            else
+            {
+                Info<< nl;
+            }
+
+            // The filename based on the original, but with additional
+            // time information. The extension was previously checked that
+            // it exists
+            std::string::size_type dot = userOutFileName.rfind('.');
+
+            outFileName =
+                userOutFileName.substr(0, dot) + "_"
+              + Foam::name(runTime.value()) + "."
+              + userOutFileName.ext();
+        }
 
         // Create local surface from:
         // - explicitly named patches only (-patches (at your option)
@@ -144,7 +192,6 @@ int main(int argc, char *argv[])
         }
 
 
-
         const faceZoneMesh& fzm = mesh.faceZones();
         labelHashSet includeFaceZones(fzm.size());
 
@@ -172,7 +219,11 @@ int main(int argc, char *argv[])
 
             }
             Info<< "Additionally triangulating faceZones "
-            << UIndirectList<word>(allZoneNames, includeFaceZones.sortedToc())
+                << UIndirectList<word>
+                  (
+                      allZoneNames,
+                      includeFaceZones.sortedToc()
+                  )
                 << endl;
         }
 
@@ -305,7 +356,11 @@ int main(int argc, char *argv[])
         gatheredFaces[Pstream::myProcNo()] = allBoundary.localFaces();
         forAll(gatheredFaces[Pstream::myProcNo()], i)
         {
-        inplaceRenumber(pointToGlobal, gatheredFaces[Pstream::myProcNo()][i]);
+            inplaceRenumber
+           (
+                pointToGlobal,
+                gatheredFaces[Pstream::myProcNo()][i]
+           );
         }
         Pstream::gatherList(gatheredFaces);
 
@@ -344,7 +399,8 @@ int main(int argc, char *argv[])
             forAllConstIter(HashTable<label>, compactZoneID, iter)
             {
                 surfZones[iter()] = surfZoneIdentifier(iter.key(), iter());
-            Info<< "surfZone " << iter()  <<  " : " << surfZones[iter()].name()
+                Info<< "surfZone " << iter()
+                    <<  " : "      << surfZones[iter()].name()
                     << endl;
             }
 
@@ -374,7 +430,7 @@ int main(int argc, char *argv[])
 
             sortedFace.write(globalCasePath);
         }
-
+    }
     Info<< "End\n" << endl;
 
     return 0;

applications/utilities/surface/surfaceTransformPoints/surfaceTransformPoints.C

@@ -61,8 +61,10 @@ int main(int argc, char *argv[])
 {
     argList::addNote
     (
-        "Transform (scale/rotate) a surface. "
-        "Like transformPoints but for surfaces."
+        "Transform (translate/rotate/scale) a surface. "
+        "Like transformPoints but for surfaces.\n"
+        "Note: roll=rotation about x, pitch=rotation about y, "
+        "yaw=rotation about z"
     );
     argList::noParallel();
     argList::validArgs.append("surfaceFile");
@@ -91,13 +93,13 @@ int main(int argc, char *argv[])
     (
         "rollPitchYaw",
         "vector",
-        "transform in terms of '( roll pitch yaw )' in degrees"
+        "rotate by '(roll pitch yaw)' in degrees"
     );
     argList::addOption
     (
         "yawPitchRoll",
         "vector",
-        "transform in terms of '( yaw pitch roll )' in degrees"
+        "rotate by '(yaw pitch roll)' in degrees"
     );
     argList args(argc, argv);
 

applications/utilities/thermophysical/adiabaticFlameT/adiabaticFlameT.C

@@ -55,7 +55,15 @@ typedef species::thermo<janafThermo<perfectGas<specie>>, absoluteEnthalpy>
 
 int main(int argc, char *argv[])
 {
+    argList::addNote
+    (
+        "Calculates the adiabatic flame temperature for a given fuel\n"
+        "over a range of unburnt temperatures and equivalence ratios."
+    );
+    argList::noParallel();
+    argList::noFunctionObjects();
     argList::validArgs.append("controlFile");
+
     argList args(argc, argv);
 
     const fileName controlFileName = args[1];

applications/utilities/thermophysical/chemkinToFoam/chemkinToFoam.C

@@ -48,6 +48,13 @@ int main(int argc, char *argv[])
     // Increase the precision of the output for JANAF coefficients
     Ostream::defaultPrecision(10);
 
+    argList::addNote
+    (
+        "Converts CHEMKINIII thermodynamics and reaction data files into\n"
+        "OpenFOAM format."
+    );
+    argList::noParallel();
+    argList::noFunctionObjects();
     argList::validArgs.append("CHEMKINFile");
     argList::validArgs.append("CHEMKINThermodynamicsFile");
     argList::validArgs.append("CHEMKINTransport");
@@ -62,7 +69,7 @@ int main(int argc, char *argv[])
 
     argList args(argc, argv);
 
-    bool newFormat = args.optionFound("newFormat");
+    const bool newFormat = args.optionFound("newFormat");
 
     speciesTable species;
 

applications/utilities/thermophysical/equilibriumCO/equilibriumCO.C

@@ -56,6 +56,13 @@ typedef species::thermo<janafThermo<perfectGas<specie>>, absoluteEnthalpy>
 
 int main(int argc, char *argv[])
 {
+    argList::addNote
+    (
+        "Calculates the equilibrium level of carbon monoxide."
+    );
+    argList::noParallel();
+    argList::noFunctionObjects();
+
     #include "setRootCase.H"
     #include "createTime.H"
 

applications/utilities/thermophysical/equilibriumFlameT/Hydrogen.log

@@ -1,481 +0,0 @@
-/*---------------------------------------------------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  plus                                  |
-|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-Build  : dev-27a117d1f441
-Exec   : equilibriumFlameT controlDict
-Date   : Jan 16 2013
-Time   : 15:40:39
-Host   : "dm"
-PID    : 4638
-Case   : /home/dm2/henry/OpenFOAM/OpenFOAM-dev/applications/utilities/thermophysical/equilibriumFlameT
-nProcs : 1
-sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
-SetNaN : Initialising allocated memory to NaN (FOAM_SETNAN).
-fileModificationChecking : Monitoring run-time modified files using timeStampMaster
-allowSystemOperations : Allowing user-supplied system call operations
-
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-Reading thermodynamic data dictionary
-
-Reading thermodynamic data for relevant species
-
-stoichiometricAirFuelMassRatio stoichiometricAirFuelMassRatio [0 0 0 0 0 0 0] 34.0741;
-Equilibrium flame temperature data (1 bar)
-
-Phi          ft     T0         Tad         Teq      Terror   O2res (mole frac)
-
-0.6    0.017304    300     1849.36     1848.92    0.441261   0.0746347
-0.6    0.017304    400     1932.16     1931.28    0.879009   0.0746693
-0.6    0.017304    500     2015.31     2013.66      1.6553   0.0747311
-0.6    0.017304    600      2099.1     2096.14     2.96655    0.074836
-0.6    0.017304    700     2183.84     2178.76     5.08632   0.0750065
-0.6    0.017304    800     2269.77      2261.4     8.37223   0.0752722
-0.6    0.017304    900     2356.97     2343.72     13.2521   0.0756689
-0.6    0.017304   1000     2445.26     2425.09     20.1747   0.0762341
-0.6    0.017304   1100     2534.41     2504.86     29.5499    0.077003
-0.6    0.017304   1200     2624.41     2582.69     41.7235   0.0780054
-0.6    0.017304   1300     2715.19     2658.28     56.9132   0.0792609
-0.6    0.017304   1400     2806.69     2731.49     75.1966   0.0807775
-0.6    0.017304   1500     2898.84     2802.32     96.5198   0.0825522
-0.6    0.017304   1600      2991.6     2870.87     120.724   0.0845729
-0.6    0.017304   1700      3084.9     2937.32     147.577   0.0868217
-0.6    0.017304   1800     3178.71      3001.9      176.81   0.0892764
-0.6    0.017304   1900     3272.98     3064.84     208.131   0.0919138
-0.6    0.017304   2000     3367.66      3126.4     241.253     0.09471
-0.6    0.017304   2100     3462.72     3186.82     275.903   0.0976445
-0.6    0.017304   2200     3558.12      3246.2     311.925    0.100726
-0.6    0.017304   2300     3653.84     3303.74     350.096    0.104207
-0.6    0.017304   2400     3749.83     3350.89     398.934    0.110203
-0.6    0.017304   2500     3846.07     3351.34      494.73    0.126061
-0.6    0.017304   2600     3942.53     3291.95      650.58    0.151488
-0.6    0.017304   2700     4039.19     3236.21     802.988     0.17406
-0.6    0.017304   2800     4136.03     3245.34     890.687    0.186501
-0.6    0.017304   2900     4233.03     3344.34     888.683    0.186501
-0.6    0.017304   3000     4330.16     3443.39      886.77    0.186501
-0.65    0.018719    300     1944.33     1943.23     1.10762   0.0647597
-0.65    0.018719    400     2026.59     2024.53     2.05315   0.0648355
-0.65    0.018719    500     2109.23     2105.61     3.62082   0.0649618
-0.65    0.018719    600     2192.53     2186.42     6.10504    0.065163
-0.65    0.018719    700     2276.78      2266.9     9.88012   0.0654705
-0.65    0.018719    800     2362.23     2346.84     15.3867   0.0659212
-0.65    0.018719    900     2448.96     2425.87     23.0886   0.0665545
-0.65    0.018719   1000     2536.81     2503.41     33.3941   0.0674057
-0.65    0.018719   1100     2625.53     2578.93     46.5953   0.0685004
-0.65    0.018719   1200     2715.11     2652.24     62.8776   0.0698558
-0.65    0.018719   1300     2805.51     2723.23     82.2781   0.0714767
-0.65    0.018719   1400     2896.63     2791.92      104.71   0.0733571
-0.65    0.018719   1500     2988.44     2858.44     129.993   0.0754833
-0.65    0.018719   1600     3080.86     2922.97     157.886   0.0778362
-0.65    0.018719   1700     3173.85     2985.73     188.117   0.0803935
-0.65    0.018719   1800     3267.36     3046.95     220.404   0.0831323
-0.65    0.018719   1900     3361.34     3106.87     254.469   0.0860297
-0.65    0.018719   2000     3455.75     3165.68     290.067   0.0890703
-0.65    0.018719   2100     3550.55     3223.35     327.196   0.0923026
-0.65    0.018719   2200     3645.71     3278.01     367.698   0.0962479
-0.65    0.018719   2300     3741.18     3314.72     426.463    0.104431
-0.65    0.018719   2400     3836.94     3292.03     544.908    0.124389
-0.65    0.018719   2500     3932.96     3229.29     703.673    0.149514
-0.65    0.018719   2600     4029.21     3177.81     851.399    0.170937
-0.65    0.018719   2700     4125.67     3175.22     950.445    0.184778
-0.65    0.018719   2800     4222.31      3274.1     948.203    0.184778
-0.65    0.018719   2900     4319.11     3373.04      946.07    0.184778
-0.65    0.018719   3000     4416.05     3472.02     944.031    0.184778
-0.7   0.0201299    300     2035.76     2033.25     2.51585   0.0551272
-0.7   0.0201299    400     2117.53     2113.15     4.37823   0.0552783
-0.7   0.0201299    500     2199.71     2192.43     7.27913   0.0555149
-0.7   0.0201299    600     2282.56     2270.96     11.6037   0.0558696
-0.7   0.0201299    700     2366.37     2348.58     17.7905   0.0563794
-0.7   0.0201299    800     2451.38     2425.09     26.2928   0.0570833
-0.7   0.0201299    900     2537.69     2500.17     37.5154   0.0580165
-0.7   0.0201299   1000     2625.11     2573.39     51.7294   0.0592034
-0.7   0.0201299   1100     2713.43     2644.39     69.0438   0.0606547
-0.7   0.0201299   1200     2802.64     2713.17     89.4684    0.062373
-0.7   0.0201299   1300     2892.67     2779.78     112.888     0.06435
-0.7   0.0201299   1400     2983.45     2844.35     139.106   0.0665705
-0.7   0.0201299   1500     3074.93     2907.05     167.878   0.0690147
-0.7   0.0201299   1600     3167.04      2968.1     198.938   0.0716609
-0.7   0.0201299   1700     3259.73     3027.72     232.012   0.0744866
-0.7   0.0201299   1800     3352.96     3086.12     266.841   0.0774712
-0.7   0.0201299   1900     3446.67     3143.43     303.236   0.0806124
-0.7   0.0201299   2000     3540.82     3199.29     341.528   0.0840445
-0.7   0.0201299   2100     3635.38      3249.5     385.874   0.0888593
-0.7   0.0201299   2200     3730.29     3268.93     461.361    0.100608
-0.7   0.0201299   2300     3825.54     3223.58     601.959    0.124079
-0.7   0.0201299   2400     3921.08     3163.25     757.829    0.147885
-0.7   0.0201299   2500     4016.89      3115.4      901.49    0.168314
-0.7   0.0201299   2600     4112.93     3104.31     1008.62    0.183086
-0.7   0.0201299   2700     4209.19     3203.06     1006.13    0.183086
-0.7   0.0201299   2800     4305.63     3301.88     1003.76    0.183086
-0.7   0.0201299   2900     4402.25     3400.75      1001.5    0.183086
-0.7   0.0201299   3000     4499.01     3499.67     999.336    0.183086
-0.75   0.0215368    300     2123.87      2118.6     5.26414   0.0457828
-0.75   0.0215368    400     2205.19     2196.54     8.64652   0.0460605
-0.75   0.0215368    500     2286.96     2273.35     13.6024   0.0464696
-0.75   0.0215368    600     2369.39     2348.84      20.555   0.0470463
-0.75   0.0215368    700     2452.79     2422.87     29.9229   0.0478271
-0.75   0.0215368    800      2537.4     2495.33     42.0731   0.0488441
-0.75   0.0215368    900     2623.32     2566.06     57.2623   0.0501209
-0.75   0.0215368   1000     2710.36     2634.79     75.5739   0.0516661
-0.75   0.0215368   1100     2798.31     2701.37     96.9358   0.0534755
-0.75   0.0215368   1200     2887.16     2765.93     121.226   0.0555401
-0.75   0.0215368   1300     2976.85     2828.61     148.241   0.0578437
-0.75   0.0215368   1400     3067.31     2889.57     177.736   0.0603667
-0.75   0.0215368   1500     3158.48     2949.02     209.456    0.063088
-0.75   0.0215368   1600      3250.3     3007.15     243.145   0.0659865
-0.75   0.0215368   1700     3342.71     3064.14     278.571    0.069047
-0.75   0.0215368   1800     3435.67     3119.98     315.691   0.0723035
-0.75   0.0215368   1900     3529.12     3173.54     355.588   0.0760823
-0.75   0.0215368   2000     3623.03     3215.17     407.865   0.0827504
-0.75   0.0215368   2100     3717.35     3207.15     510.202   0.0997809
-0.75   0.0215368   2200     3812.04        3147     665.038    0.124757
-0.75   0.0215368   2300     3907.07     3092.14     814.923    0.146832
-0.75   0.0215368   2400      4002.4     3047.13     955.268    0.166424
-0.75   0.0215368   2500        4098     3032.67     1065.33    0.181425
-0.75   0.0215368   2600     4193.84     3131.28     1062.56    0.181425
-0.75   0.0215368   2700     4289.91     3229.97     1059.94    0.181425
-0.75   0.0215368   2800     4386.16     3328.72     1057.44    0.181425
-0.75   0.0215368   2900     4482.59     3427.53     1055.06    0.181425
-0.75   0.0215368   3000     4579.17     3526.39     1052.78    0.181425
-0.8   0.0229397    300     2208.84     2198.55     10.2856   0.0368016
-0.8   0.0229397    400     2289.76     2273.78     15.9817   0.0372748
-0.8   0.0229397    500     2371.15     2347.32     23.8229   0.0379294
-0.8   0.0229397    600     2453.21     2419.04     34.1694   0.0387973
-0.8   0.0229397    700     2536.24     2488.92     47.3167    0.039905
-0.8   0.0229397    800     2620.48     2557.01     63.4684   0.0412715
-0.8   0.0229397    900     2706.03     2623.32     82.7038   0.0429054
-0.8   0.0229397   1000     2792.71     2687.77     104.941   0.0448014
-0.8   0.0229397   1100     2880.31     2750.32     129.984   0.0469441
-0.8   0.0229397   1200     2968.83     2811.18     157.651   0.0493193
-0.8   0.0229397   1300      3058.2     2870.49     187.709   0.0519078
-0.8   0.0229397   1400     3148.36     2928.44     219.918     0.05469
-0.8   0.0229397   1500     3239.24     2985.19     254.048   0.0576479
-0.8   0.0229397   1600     3330.78     3040.84     289.946   0.0607847
-0.8   0.0229397   1700     3422.93     3094.94     327.986   0.0642431
-0.8   0.0229397   1800     3515.63     3144.62     371.018   0.0687801
-0.8   0.0229397   1900     3608.84     3166.57     442.271   0.0796671
-0.8   0.0229397   2000     3702.52     3123.82     578.694    0.102453
-0.8   0.0229397   2100     3796.61     3062.37     734.239    0.126254
-0.8   0.0229397   2200     3891.08     3012.82     878.258    0.146769
-0.8   0.0229397   2300      3985.9     2969.95     1015.95    0.165648
-0.8   0.0229397   2400     4081.02     2960.34     1120.68    0.179795
-0.8   0.0229397   2500     4176.43     3058.81     1117.62    0.179795
-0.8   0.0229397   2600     4272.08     3157.36     1114.72    0.179795
-0.8   0.0229397   2700     4367.96     3255.99     1111.97    0.179795
-0.8   0.0229397   2800     4464.03     3354.68     1109.35    0.179795
-0.8   0.0229397   2900     4560.28     3453.43     1106.85    0.179795
-0.8   0.0229397   3000     4656.69     3552.23     1104.46    0.179795
-0.85   0.0243385    300     2290.86     2271.89     18.9685   0.0282998
-0.85   0.0243385    400     2371.41     2343.55     27.8685   0.0290475
-0.85   0.0243385    500     2452.45      2413.1     39.3563   0.0300172
-0.85   0.0243385    600     2534.18     2480.55     53.6235   0.0312269
-0.85   0.0243385    700     2616.86     2546.07     70.7851   0.0326882
-0.85   0.0243385    800     2700.75     2609.87     90.8809   0.0344063
-0.85   0.0243385    900     2785.96      2672.1      113.86   0.0363784
-0.85   0.0243385   1000     2872.32     2732.77     139.549   0.0385908
-0.85   0.0243385   1100     2959.59     2791.88     167.705    0.041024
-0.85   0.0243385   1200      3047.8     2849.65     198.145    0.043663
-0.85   0.0243385   1300     3136.87     2906.22     230.656   0.0464908
-0.85   0.0243385   1400     3226.75     2961.68      265.07   0.0495028
-0.85   0.0243385   1500     3317.35     3015.81     301.538   0.0527804
-0.85   0.0243385   1600     3408.63     3066.84     341.787   0.0568065
-0.85   0.0243385   1700     3500.53     3104.48     396.051   0.0640162
-0.85   0.0243385   1800     3592.99     3084.34     508.645   0.0828878
-0.85   0.0243385   1900     3685.97     3019.83     666.138    0.107717
-0.85   0.0243385   2000     3779.41     2965.44     813.977    0.129098
-0.85   0.0243385   2100     3873.29     2919.57      953.72    0.148417
-0.85   0.0243385   2200     3967.55     2878.14     1089.41    0.166695
-0.85   0.0243385   2300     4062.16     2887.39     1174.78    0.178193
-0.85   0.0243385   2400     4157.09      2985.7     1171.39    0.178193
-0.85   0.0243385   2500     4252.31      3084.1      1168.2    0.178193
-0.85   0.0243385   2600     4347.77     3182.59     1165.18    0.178193
-0.85   0.0243385   2700     4443.47     3281.16     1162.31    0.178193
-0.85   0.0243385   2800     4539.37     3379.79     1159.58    0.178193
-0.85   0.0243385   2900     4635.44     3478.48     1156.96    0.178193
-0.85   0.0243385   3000     4731.69     3577.23     1154.46    0.178193
-0.9   0.0257334    300     2370.09     2336.78     33.3173   0.0204491
-0.9   0.0257334    400     2450.31     2404.16     46.1529   0.0215394
-0.9   0.0257334    500     2531.04     2469.35     61.6865   0.0228649
-0.9   0.0257334    600     2612.44     2532.52      79.921   0.0244277
-0.9   0.0257334    700      2694.8     2593.97     100.836   0.0262275
-0.9   0.0257334    800     2778.38     2653.99      124.39   0.0282621
-0.9   0.0257334    900     2863.28     2712.78     150.491    0.030525
-0.9   0.0257334   1000     2949.32     2770.36     178.952   0.0330009
-0.9   0.0257334   1100     3036.28     2826.74     209.547    0.035672
-0.9   0.0257334   1200      3124.2     2882.03     242.174   0.0385401
-0.9   0.0257334   1300     3212.99     2935.98     277.011   0.0416893
-0.9   0.0257334   1400      3302.6      2986.9     315.702    0.045578
-0.9   0.0257334   1500     3392.94     3028.82      364.12   0.0515944
-0.9   0.0257334   1600     3483.97     3019.41     464.567    0.068226
-0.9   0.0257334   1700     3575.63      2951.2     624.433   0.0935821
-0.9   0.0257334   1800     3667.86     2892.42     775.443    0.115391
-0.9   0.0257334   1900     3760.61     2843.56      917.05    0.134916
-0.9   0.0257334   2000     3853.85     2799.75     1054.09    0.153338
-0.9   0.0257334   2100     3947.51     2759.06     1188.45    0.171094
-0.9   0.0257334   2200     4041.57     2813.86     1227.71    0.176619
-0.9   0.0257334   2300     4135.99        2912     1223.99    0.176619
-0.9   0.0257334   2400     4230.73     3010.24     1220.48    0.176619
-0.9   0.0257334   2500     4325.76     3108.59     1217.17    0.176619
-0.9   0.0257334   2600     4421.04     3207.02     1214.03    0.176619
-0.9   0.0257334   2700     4516.56     3305.52     1211.04    0.176619
-0.9   0.0257334   2800     4612.29      3404.1     1208.19    0.176619
-0.9   0.0257334   2900      4708.2     3502.73     1205.47    0.176619
-0.9   0.0257334   3000     4804.28     3601.43     1202.85    0.176619
-0.95   0.0271242    300     2446.69     2390.47     56.2165   0.0135013
-0.95   0.0271242    400      2526.6     2453.56     73.0446    0.014947
-0.95   0.0271242    500     2607.03     2514.76     92.2714    0.016606
-0.95   0.0271242    600     2688.14     2574.31     113.833   0.0184742
-0.95   0.0271242    700     2770.21     2632.51       137.7   0.0205501
-0.95   0.0271242    800     2853.49     2689.64      163.85   0.0228334
-0.95   0.0271242    900     2938.09     2745.85     192.246   0.0253261
-0.95   0.0271242   1000     3023.84     2800.95     222.894   0.0280617
-0.95   0.0271242   1100     3110.52     2854.04     256.478   0.0312581
-0.95   0.0271242   1200     3198.16     2901.95     296.209   0.0357143
-0.95   0.0271242   1300     3286.69     2937.18     349.506   0.0429733
-0.95   0.0271242   1400     3376.04     2901.93     474.111   0.0635068
-0.95   0.0271242   1500     3466.14     2818.66     647.478   0.0895965
-0.95   0.0271242   1600     3556.93     2756.28     800.654    0.110895
-0.95   0.0271242   1700     3648.36     2703.85     944.503    0.130251
-0.95   0.0271242   1800     3740.37     2656.95     1083.42    0.148612
-0.95   0.0271242   1900     3832.91     2615.22     1217.69    0.165993
-0.95   0.0271242   2000     3925.93     2641.98     1283.95    0.175073
-0.95   0.0271242   2100      4019.4      2739.8      1279.6    0.175073
-0.95   0.0271242   2200     4113.26     2837.76     1275.51    0.175073
-0.95   0.0271242   2300     4207.49     2935.83     1271.66    0.175073
-0.95   0.0271242   2400     4302.04     3034.02     1268.03    0.175073
-0.95   0.0271242   2500     4396.89      3132.3     1264.59    0.175073
-0.95   0.0271242   2600        4492     3230.67     1261.33    0.175073
-0.95   0.0271242   2700     4587.35     3329.12     1258.23    0.175073
-0.95   0.0271242   2800     4682.91     3427.64     1255.27    0.175073
-0.95   0.0271242   2900     4778.66     3526.22     1252.44    0.175073
-0.95   0.0271242   3000     4874.58     3624.86     1249.72    0.175073
-  1   0.0285111    300     2520.79     2428.95     91.8415  0.00783223
-  1   0.0285111    400     2600.42     2489.16     111.262  0.00954474
-  1   0.0285111    500     2680.58     2547.46     133.116   0.0115427
-  1   0.0285111    600     2761.42     2603.06     158.358   0.0140645
-  1   0.0285111    700     2843.21     2656.82     186.389   0.0169302
-  1   0.0285111    800     2926.22     2705.82     220.398   0.0208555
-  1   0.0285111    900     3010.54     2717.47     293.073    0.031931
-  1   0.0285111   1000     3096.01     2308.21     787.803    0.102583
-  1   0.0285111   1100     3182.42     2231.26     951.156    0.118119
-  1   0.0285111   1200      3269.8     2192.08     1077.72    0.134773
-  1   0.0285111   1300     3358.08     2047.07     1311.01    0.173419
-  1   0.0285111   1400     3447.18      2082.4     1364.79    0.173554
-  1   0.0285111   1500     3537.05     2179.02     1358.03    0.173554
-  1   0.0285111   1600     3627.61     2275.87     1351.74    0.173554
-  1   0.0285111   1700     3718.82     2372.94     1345.88    0.173554
-  1   0.0285111   1800     3810.62     2470.21     1340.41    0.173554
-  1   0.0285111   1900     3902.95     2567.65      1335.3    0.173554
-  1   0.0285111   2000     3995.78     2665.26     1330.52    0.173554
-  1   0.0285111   2100     4089.05     2763.02     1326.03    0.173554
-  1   0.0285111   2200     4182.73     2860.91     1321.82    0.173554
-  1   0.0285111   2300     4276.77     2958.92     1317.85    0.173554
-  1   0.0285111   2400     4371.14     3057.05      1314.1    0.173554
-  1   0.0285111   2500     4465.82     3155.27     1310.54    0.173554
-  1   0.0285111   2600     4560.76     3253.59     1307.17    0.173554
-  1   0.0285111   2700     4655.94     3351.98     1303.96    0.173554
-  1   0.0285111   2800     4751.34     3450.45     1300.89    0.173554
-  1   0.0285111   2900     4846.93     3548.98     1297.95    0.173554
-  1   0.0285111   3000      4942.7     3647.57     1295.13    0.173554
-1.05    0.029894    300     2492.46      2407.6     84.8585  0.00720339
-1.05    0.029894    400     2572.23     2468.77     103.454  0.00882851
-1.05    0.029894    500     2652.51     2528.16     124.356   0.0107005
-1.05    0.029894    600     2733.46     2585.15     148.303   0.0130117
-1.05    0.029894    700     2815.33     2639.93     175.395   0.0157578
-1.05    0.029894    800     2898.38     2693.11     205.275   0.0188396
-1.05    0.029894    900     2982.74     2723.45     259.288   0.0266549
-1.05    0.029894   1000     3068.23     2622.42     445.805   0.0547019
-1.05    0.029894   1100     3154.64     2157.67     996.976    0.129741
-1.05    0.029894   1200     3242.02     2280.98     961.044    0.127053
-1.05    0.029894   1300     3330.29     2050.85     1279.44    0.170376
-1.05    0.029894   1400     3419.38     2125.13     1294.25     0.16278
-1.05    0.029894   1500     3509.23     2169.74     1339.48    0.170593
-1.05    0.029894   1600     3599.77     2266.59     1333.18    0.170593
-1.05    0.029894   1700     3690.96     2363.65      1327.3    0.170593
-1.05    0.029894   1800     3782.73     2460.91     1321.82    0.170593
-1.05    0.029894   1900     3875.03     2558.35     1316.69    0.170593
-1.05    0.029894   2000     3967.83     2655.94     1311.88    0.170593
-1.05    0.029894   2100     4061.07     2753.69     1307.38    0.170593
-1.05    0.029894   2200     4154.72     2851.57     1303.14    0.170593
-1.05    0.029894   2300     4248.73     2949.58     1299.15    0.170593
-1.05    0.029894   2400     4343.07     3047.69     1295.38    0.170593
-1.05    0.029894   2500     4437.72     3145.91     1291.81    0.170593
-1.05    0.029894   2600     4532.63     3244.21     1288.42    0.170593
-1.05    0.029894   2700     4627.79      3342.6     1285.19    0.170593
-1.05    0.029894   2800     4723.16     3441.06     1282.11    0.170593
-1.05    0.029894   2900     4818.73     3539.58     1279.15    0.170593
-1.05    0.029894   3000     4914.48     3638.16     1276.32    0.170593
-1.1    0.031273    300     2464.87      2386.5     78.3786  0.00662398
-1.1    0.031273    400     2544.79     2448.61     96.1825  0.00816896
-1.1    0.031273    500      2625.2     2508.98     116.227   0.0099387
-1.1    0.031273    600     2706.25     2567.32     138.926   0.0120454
-1.1    0.031273    700      2788.2     2623.15     165.049   0.0146643
-1.1    0.031273    800     2871.31     2677.34     193.962    0.017615
-1.1    0.031273    900      2955.7     2719.78      235.92   0.0231087
-1.1    0.031273   1000     3041.21      2693.5      347.71   0.0402781
-1.1    0.031273   1100     3127.63     2167.25     960.385    0.125446
-1.1    0.031273   1200     3215.01     2111.06     1103.96     0.14489
-1.1    0.031273   1300     3303.28     2053.83     1249.45    0.167407
-1.1    0.031273   1400     3392.36     2173.47     1218.89     0.15138
-1.1    0.031273   1500     3482.19     2160.73     1321.46    0.167732
-1.1    0.031273   1600     3572.72     2257.57     1315.15    0.167732
-1.1    0.031273   1700     3663.88     2354.63     1309.25    0.167732
-1.1    0.031273   1800     3755.63     2451.88     1303.75    0.167732
-1.1    0.031273   1900     3847.91      2549.3     1298.61    0.167732
-1.1    0.031273   2000     3940.68     2646.89     1293.79    0.167732
-1.1    0.031273   2100     4033.89     2744.63     1289.26    0.167732
-1.1    0.031273   2200     4127.51     2842.51     1285.01    0.167732
-1.1    0.031273   2300      4221.5      2940.5        1281    0.167732
-1.1    0.031273   2400     4315.82     3038.61     1277.21    0.167732
-1.1    0.031273   2500     4410.43     3136.81     1273.62    0.167732
-1.1    0.031273   2600     4505.32     3235.11     1270.21    0.167732
-1.1    0.031273   2700     4600.46     3333.49     1266.97    0.167732
-1.1    0.031273   2800     4695.81     3431.94     1263.87    0.167732
-1.1    0.031273   2900     4791.36     3530.45      1260.9    0.167732
-1.1    0.031273   3000     4887.08     3629.03     1258.05    0.167732
-1.15   0.0326481    300     2438.01     2365.65     72.3675  0.00608988
-1.15   0.0326481    400     2518.07     2428.67     89.4064  0.00755975
-1.15   0.0326481    500     2598.61     2489.96     108.651  0.00924133
-1.15   0.0326481    600     2679.76     2549.42     130.344   0.0112026
-1.15   0.0326481    700     2761.79     2606.41     155.383   0.0136615
-1.15   0.0326481    800     2844.96     2661.52     183.443   0.0165071
-1.15   0.0326481    900     2929.39     2711.04      218.35   0.0205875
-1.15   0.0326481   1000     3014.93     2720.02     294.911   0.0321946
-1.15   0.0326481   1100     3101.36     2251.55     849.815    0.109583
-1.15   0.0326481   1200     3188.75     2233.94     954.807    0.119285
-1.15   0.0326481   1300     3277.01     2056.18     1220.83    0.164505
-1.15   0.0326481   1400     3366.09      2095.8     1270.29    0.164884
-1.15   0.0326481   1500     3455.91     2151.97     1303.94    0.164965
-1.15   0.0326481   1600     3546.42     2248.81     1297.61    0.164965
-1.15   0.0326481   1700     3637.57     2345.86     1291.71    0.164965
-1.15   0.0326481   1800     3729.29      2443.1     1286.19    0.164965
-1.15   0.0326481   1900     3821.55     2540.52     1281.03    0.164965
-1.15   0.0326481   2000      3914.3      2638.1      1276.2    0.164965
-1.15   0.0326481   2100     4007.49     2735.83     1271.66    0.164965
-1.15   0.0326481   2200     4101.08     2833.69     1267.39    0.164965
-1.15   0.0326481   2300     4195.04     2931.68     1263.36    0.164965
-1.15   0.0326481   2400     4289.34     3029.78     1259.56    0.164965
-1.15   0.0326481   2500     4383.93     3127.98     1255.95    0.164965
-1.15   0.0326481   2600      4478.8     3226.27     1252.53    0.164965
-1.15   0.0326481   2700     4573.91     3324.64     1249.27    0.164965
-1.15   0.0326481   2800     4669.24     3423.08     1246.16    0.164965
-1.15   0.0326481   2900     4764.77     3521.59     1243.18    0.164965
-1.15   0.0326481   3000     4860.48     3620.16     1240.32    0.164965
-1.2   0.0340193    300     2411.84     2345.05     66.7936  0.00559749
-1.2   0.0340193    400     2492.05     2408.96     83.0903  0.00699607
-1.2   0.0340193    500     2572.72     2471.14     101.574  0.00859836
-1.2   0.0340193    600     2653.97     2531.58     122.394    0.010447
-1.2   0.0340193    700     2736.08     2589.76     146.318    0.012734
-1.2   0.0340193    800     2819.31     2645.91       173.4   0.0154441
-1.2   0.0340193    900     2903.78     2699.56      204.22      0.0187
-1.2   0.0340193   1000     2989.35     2727.81     261.538   0.0270303
-1.2   0.0340193   1100      3075.8     2577.07     498.722   0.0617691
-1.2   0.0340193   1200     3163.19     2290.04     873.153    0.105911
-1.2   0.0340193   1300     3251.46     2053.86      1197.6    0.159385
-1.2   0.0340193   1400     3340.53      2100.7     1239.83    0.162141
-1.2   0.0340193   1500     3430.34     2143.45     1286.89    0.162287
-1.2   0.0340193   1600     3520.84     2240.28     1280.56    0.162287
-1.2   0.0340193   1700     3611.98     2337.33     1274.65    0.162287
-1.2   0.0340193   1800     3703.68     2434.56     1269.12    0.162287
-1.2   0.0340193   1900     3795.92     2531.98     1263.95    0.162287
-1.2   0.0340193   2000     3888.65     2629.55      1259.1    0.162287
-1.2   0.0340193   2100     3981.82     2727.27     1254.54    0.162287
-1.2   0.0340193   2200     4075.39     2825.13     1250.26    0.162287
-1.2   0.0340193   2300     4169.33     2923.11     1246.22    0.162287
-1.2   0.0340193   2400      4263.6      3021.2      1242.4    0.162287
-1.2   0.0340193   2500     4358.17     3119.39     1238.78    0.162287
-1.2   0.0340193   2600     4453.02     3217.67     1235.34    0.162287
-1.2   0.0340193   2700     4548.11     3316.04     1232.07    0.162287
-1.2   0.0340193   2800     4643.42     3414.48     1228.95    0.162287
-1.2   0.0340193   2900     4738.94     3512.98     1225.96    0.162287
-1.2   0.0340193   3000     4834.63     3611.54     1223.09    0.162287
-1.25   0.0353866    300     2386.33     2324.71     61.6276  0.00514364
-1.25   0.0353866    400     2466.68     2389.48     77.2031  0.00647404
-1.25   0.0353866    500     2547.49     2452.53     94.9548  0.00800299
-1.25   0.0353866    600     2628.85     2513.87     114.979  0.00975815
-1.25   0.0353866    700     2711.04     2573.29     137.745   0.0118577
-1.25   0.0353866    800     2794.33     2630.39     163.932   0.0144522
-1.25   0.0353866    900     2878.85      2685.7     193.145   0.0174261
-1.25   0.0353866   1000     2964.44     2726.14     238.301   0.0235026
-1.25   0.0353866   1100     3050.91     2678.75     372.156   0.0437591
-1.25   0.0353866   1200     3138.31     2278.54     859.767    0.105907
-1.25   0.0353866   1300     3226.58        2199     1027.58    0.135896
-1.25   0.0353866   1400     3315.66     2103.52     1212.14    0.159473
-1.25   0.0353866   1500     3405.47     2140.38     1265.09    0.159689
-1.25   0.0353866   1600     3495.96     2231.99     1263.97    0.159696
-1.25   0.0353866   1700     3587.08     2329.03     1258.05    0.159696
-1.25   0.0353866   1800     3678.77     2426.26     1252.51    0.159696
-1.25   0.0353866   1900        3771     2523.67     1247.33    0.159696
-1.25   0.0353866   2000      3863.7     2621.24     1242.47    0.159696
-1.25   0.0353866   2100     3956.85     2718.95      1237.9    0.159696
-1.25   0.0353866   2200      4050.4      2816.8      1233.6    0.159696
-1.25   0.0353866   2300     4144.32     2914.78     1229.55    0.159696
-1.25   0.0353866   2400     4238.57     3012.86     1225.72    0.159696
-1.25   0.0353866   2500     4333.13     3111.04     1222.08    0.159696
-1.25   0.0353866   2600     4427.96     3209.32     1218.64    0.159696
-1.25   0.0353866   2700     4523.03     3307.68     1215.35    0.159696
-1.25   0.0353866   2800     4618.33     3406.11     1212.22    0.159696
-1.25   0.0353866   2900     4713.83     3504.61     1209.22    0.159696
-1.25   0.0353866   3000     4809.51     3603.17     1206.34    0.159696
-1.3   0.0367501    300     2361.46     2304.62     56.8423   0.0047254
-1.3   0.0367501    400     2441.96     2370.24     71.7168  0.00599037
-1.3   0.0367501    500     2522.89     2434.13     88.7599  0.00745029
-1.3   0.0367501    600     2604.36     2496.32      108.04  0.00912394
-1.3   0.0367501    700     2686.63     2556.78     129.858    0.011087
-1.3   0.0367501    800     2769.99     2614.93     155.053   0.0135382
-1.3   0.0367501    900     2854.55     2671.11     183.441   0.0164082
-1.3   0.0367501   1000     2940.18     2719.34     220.839    0.020966
-1.3   0.0367501   1100     3026.67     2716.03     310.638   0.0345757
-1.3   0.0367501   1200     3114.09     2299.17     814.917   0.0995504
-1.3   0.0367501   1300     3202.36     2339.63     862.738    0.100832
-1.3   0.0367501   1400     3291.44     2105.72     1185.72    0.156866
-1.3   0.0367501   1500     3381.25     2198.32     1182.93    0.146587
-1.3   0.0367501   1600     3471.74     2223.91     1247.82    0.157186
-1.3   0.0367501   1700     3562.85     2320.95      1241.9    0.157186
-1.3   0.0367501   1800     3654.53     2418.18     1236.35    0.157186
-1.3   0.0367501   1900     3746.74     2515.58     1231.16    0.157186
-1.3   0.0367501   2000     3839.43     2613.14     1226.29    0.157186
-1.3   0.0367501   2100     3932.56     2710.86     1221.71    0.157186
-1.3   0.0367501   2200      4026.1      2808.7      1217.4    0.157186
-1.3   0.0367501   2300        4120     2906.67     1213.33    0.157186
-1.3   0.0367501   2400     4214.23     3004.75     1209.49    0.157186
-1.3   0.0367501   2500     4308.77     3102.92     1205.85    0.157186
-1.3   0.0367501   2600     4403.58     3201.19     1202.39    0.157186
-1.3   0.0367501   2700     4498.64     3299.55     1199.09    0.157186
-1.3   0.0367501   2800     4593.92     3397.98     1195.95    0.157186
-1.3   0.0367501   2900     4689.41     3496.47     1192.94    0.157186
-1.3   0.0367501   3000     4785.08     3595.03     1190.05    0.157186
-1.35   0.0381097    300      2337.2     2284.79      52.412  0.00434014
-1.35   0.0381097    400     2417.84     2351.24     66.6057  0.00554218
-1.35   0.0381097    500     2498.91     2415.95     82.9607  0.00693641
-1.35   0.0381097    600     2580.49     2478.96     101.531  0.00853635
-1.35   0.0381097    700     2662.85     2540.32     122.523   0.0103923
-1.35   0.0381097    800     2746.26     2599.53     146.737   0.0126998
-1.35   0.0381097    900     2830.88     2656.73     174.152   0.0154295
-1.35   0.0381097   1000     2916.54     2709.67     206.872    0.019057
-1.35   0.0381097   1100     3003.05     2730.09      272.96   0.0288177
-1.35   0.0381097   1200     3090.48     2251.76     838.725    0.106808
-1.35   0.0381097   1300     3178.77     2336.41     842.362   0.0992999
-1.35   0.0381097   1400     3267.85     2107.34     1160.51    0.154319
-1.35   0.0381097   1500     3357.67     2235.58     1122.08     0.13749
-1.35   0.0381097   1600     3448.15     2216.05      1232.1    0.154753
-1.35   0.0381097   1700     3539.25     2313.09     1226.17    0.154753
-1.35   0.0381097   1800     3630.93     2410.31     1220.62    0.154753
-1.35   0.0381097   1900     3723.12     2507.71     1215.42    0.154753
-1.35   0.0381097   2000      3815.8     2605.27     1210.53    0.154753
-1.35   0.0381097   2100     3908.92     2702.97     1205.95    0.154753
-1.35   0.0381097   2200     4002.44     2800.81     1201.63    0.154753
-1.35   0.0381097   2300     4096.33     2898.78     1197.55    0.154753
-1.35   0.0381097   2400     4190.55     2996.85      1193.7    0.154753
-1.35   0.0381097   2500     4285.07     3095.02     1190.04    0.154753
-1.35   0.0381097   2600     4379.86     3193.29     1186.58    0.154753
-1.35   0.0381097   2700     4474.91     3291.64     1183.27    0.154753
-1.35   0.0381097   2800     4570.18     3390.06     1180.12    0.154753
-1.35   0.0381097   2900     4665.65     3488.55      1177.1    0.154753
-1.35   0.0381097   3000     4761.31      3587.1     1174.21    0.154753
-
-end

applications/utilities/thermophysical/equilibriumFlameT/equilibriumFlameT.C

@@ -30,7 +30,7 @@ Group
 Description
     Calculates the equilibrium flame temperature for a given fuel and
     pressure for a range of unburnt gas temperatures and equivalence
-    ratios; the effects of dissociation on O2, H2O and CO2 are included.
+    ratios; includes the effects of dissociation on O2, H2O and CO2.
 
 \*---------------------------------------------------------------------------*/
 
@@ -57,7 +57,16 @@ typedef species::thermo<janafThermo<perfectGas<specie>>, absoluteEnthalpy>
 
 int main(int argc, char *argv[])
 {
+    argList::addNote
+    (
+        "Calculates the equilibrium flame temperature for a given fuel\n"
+        "and pressure for a range of unburnt gas temperatures and equivalence\n"
+        "ratios; includes the effects of dissociation on O2, H2O and CO2."
+    );
+    argList::noParallel();
+    argList::noFunctionObjects();
     argList::validArgs.append("controlFile");
+
     argList args(argc, argv);
 
     const fileName controlFileName = args[1];

applications/utilities/thermophysical/mixtureAdiabaticFlameT/mixtureAdiabaticFlameT.C

@@ -55,6 +55,13 @@ typedef species::thermo<janafThermo<perfectGas<specie>>, absoluteEnthalpy>
 
 int main(int argc, char *argv[])
 {
+    argList::addNote
+    (
+        "Calculates the adiabatic flame temperature for a given mixture\n"
+        "at a given temperature."
+    );
+    argList::noParallel();
+    argList::noFunctionObjects();
     argList::validArgs.append("controlFile");
     argList args(argc, argv);
 

bin/foamCheckJobs

@@ -36,7 +36,6 @@
 #     file yet. Not supported by this script yet)
 #
 #------------------------------------------------------------------------------
-
 Script=${0##*/}
 
 #-------------------------------------------------------------------------------
@@ -52,6 +51,8 @@ TMPFILE=/tmp/${Script}$$.tmp
 MACHDIR=$HOME/.OpenFOAM/${Script}
 DEFSTATEFILE=$HOME/.OpenFOAM/foamCheckJobs.out
 
+# The default is "~/.OpenFOAM/jobControl"
+: ${FOAM_JOB_DIR:=$HOME/.OpenFOAM/jobControl}
 
 if [ `uname -s` = Linux ]
 then
@@ -196,13 +197,6 @@ fi
 
 #- Check a few things
 
-if [ ! "$FOAM_JOB_DIR" ]
-then
-    echo "$Script : FOAM_JOB_DIR environment variable not set."
-    echo
-    exit 1
-fi
-
 if [ ! -d "$FOAM_JOB_DIR" ]
 then
     echo "$Script : directory does not exist."

bin/foamCleanPath

@@ -4,7 +4,7 @@
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
 #   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-#    \\/     M anipulation  |
+#    \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 #-------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM.
@@ -29,21 +29,22 @@
 #     Usage: foamCleanPath [-strip] path [wildcard] .. [wildcard]
 #
 #     Prints its argument (which should be a ':' separated path)
-#     without all
+#     without the following:
 #         - duplicate elements
 #         - elements whose start matches a wildcard
-#         - inaccessible directories (with the -strip (at your option)
+#         - inaccessible directories (with the -strip option)
 #
 # Note
 #     - this routine will fail when directories have embedded spaces
 #     - false matches possible if a wildcard contains '.' (sed regex)
-#     - the wildcards can themselves can be written together and separated
+#     - the wildcards themselves can be written together and separated
 #       by colons or whitespace
 #------------------------------------------------------------------------------
 usage() {
     cat <<USAGE 1>&2
 Usage: ${0##*/} [OPTION] path [wildcard1] .. [wildcardN]
 options:
+  -debug            print debug information to stderr
   -strip            remove inaccessible directories
   -help             print the usage
 
@@ -62,95 +63,100 @@ USAGE
 }
 
 
-unset strip
-# parse options
+# Parse options
+unset optDebug optStrip
 while [ "$#" -gt 0 ]
 do
     case "$1" in
     -h | -help)
         usage
         ;;
+    -debug)
+        optDebug=true
+        ;;
     -strip)
-        strip=true
-        shift
+        optStrip=true
         ;;
     *)
         break
         ;;
     esac
+    shift
 done
 
-
+# Basic checks, setup
 [ "$#" -ge 1 ] || usage
 
 dirList="$1"
 shift
 
-[ -n "$dirList" ] || exit 2    # quick exit on empty 'dirList'
+[ -n "$dirList" ] || exit 2     # Quick exit on empty 'dirList'
 
+#-------------------------------------------------------------------------------
 
-##DEBUG echo "input>$dirList<" 1>&2
+# Debugging (optional)
+if [ -n "$optDebug" ]
+then
+    printDebug() { while [ "$#" -ge 1 ]; do echo "$1" 1>&2; shift; done; }
+else
+    printDebug() { true; }      # No-op
+fi
 
-# preserve current IFS and split on colon or whitespace
-oldIFS="$IFS"
-IFS=': '
+# Check directory existence (optional)
+if [ -n "$optStrip" ]
+then
+    isDir() { test -d "$1"; }   # Check for directory
+else
+    isDir() { true; }           # No check (always true)
+fi
 
-# "wildcard1 ... wildcardN" may have been passed as a single parameter
+# The "wildcard1 ... wildcardN" may have been passed as a single parameter
 # or may contain ':' separators
+
+oldIFS="$IFS"   # Preserve initial IFS
+IFS=': '        # Split on colon, whitespace
 set -- $*
 
+printDebug "input>$dirList<"
+
 # Strip out wildcards via sed. Path and wildcard cannot contain '?'.
 while [ "$#" -ge 1 ]
 do
-    wildcard=$1
+    wildcard="$1"
     shift
-    ##DEBUG echo "remove>$wildcard<" 1>&2
     if [ -n "$wildcard" ]
     then
+        printDebug "remove>$wildcard<"
         dirList=$(echo "$dirList:" | sed -e "s?${wildcard}[^:]*:??g")
     fi
 done
+printDebug "intermediate>$dirList<"
 
-# split on ':' (and on space as well to avoid any surprises)
-IFS=': '
+IFS=': '        # Split on colon, whitespace (to avoid surprises)
 set -- $dirList
 
-##DEBUG echo "intermediate>$dirList<" 1>&2
+IFS="$oldIFS"   # Restore initial IFS
 
-# rebuild the list from scratch
+# Rebuild the list
 unset dirList
 for dir
 do
-    ##DEBUG echo "check>$dir<" 1>&2
-    #- dirs must exist
-    if [ -e "$dir" ]
+    printDebug "check>$dir< in $dirList"
+    if isDir "$dir"
     then
-        #- no duplicate dirs
-        duplicate=$(echo " $dirList " | sed -ne "s: $dir :DUP:p")
+        # Detect duplicates (ie, dir already in the list)
+        duplicate=$(echo ":$dirList:" | sed -ne '\?:'"$dir"':?p')
 
-        if [ ! "$duplicate" ]
+        if [ -n "$duplicate" ]
         then
-            dirList="$dirList $dir"
+            printDebug "duplicate>$dir<"
+        else
+            dirList="${dirList}${dirList:+:}$dir"
         fi
-    elif [ "$strip" != true ]
-    then
-        # Print non-existing directories if not in 'strip' mode.
-        dirList="$dirList $dir"
     fi
 done
 
-# split on whitespace
-IFS=' '
-set -- $dirList
-
-# rejoin on ':'
-IFS=':'
-dirList="$*"
-
-# restore IFS
-IFS="$oldIFS"
-
-##DEBUG echo "output>$dirList<" 1>&2
+printDebug "output>$dirList<"
 echo "$dirList"
 
 #------------------------------------------------------------------------------

bin/foamEtcFile

@@ -26,7 +26,7 @@
 #     foamEtcFile
 #
 # Description
-#     Locate user/group/shipped file with semantics similar to the
+#     Locate user/group/other files with semantics similar to the
 #     ~OpenFOAM/fileName expansion.
 #
 #     The -mode option can be used to allow chaining from
@@ -34,42 +34,54 @@
 #
 #     For example, within the user ~/.OpenFOAM/<VER>/prefs.sh:
 #     \code
-#        foamFile=$(foamEtcFile -mode go prefs.sh) && . $foamFile
+#        eval $(foamEtcFile -sh -mode=go prefs.sh)
 #     \endcode
 #
+# Environment
+#     - WM_PROJECT:         (unset defaults to OpenFOAM)
+#     - WM_PROJECT_SITE:    (unset defaults to PREFIX/site)
+#     - WM_PROJECT_VERSION: (unset defaults to detect from path)
+#
 # Note
-#     This script must exist in $FOAM_INST_DIR/OpenFOAM-<VERSION>/bin/
-#     or $FOAM_INST_DIR/openfoam<VERSION>/bin/ (for the debian version)
+#     This script must exist in one of these locations:
+#     - $WM_PROJECT_INST_DIR/OpenFOAM-<VERSION>/bin
+#     - $WM_PROJECT_INST_DIR/openfoam-<VERSION>/bin
+#     - $WM_PROJECT_INST_DIR/OpenFOAM+<VERSION>/bin
+#     - $WM_PROJECT_INST_DIR/openfoam+<VERSION>/bin
+#     - $WM_PROJECT_INST_DIR/openfoam<VERSION>/bin  (debian version)
 #
 #-------------------------------------------------------------------------------
 unset optQuiet optSilent
 usage() {
     [ "${optQuiet:-$optSilent}" = true ] && exit 1
-
     exec 1>&2
     while [ "$#" -ge 1 ]; do echo "$1"; shift; done
     cat<<USAGE
 
 Usage: foamEtcFile [OPTION] fileName
-       foamEtcFile [OPTION] -list
-options:
-  -a, -all          return all files (otherwise stop after the first match)
-  -l, -list         list the directories to be searched
-  -m, -mode MODE    any combination of u(user), g(group), o(other)
-  -p, -prefix DIR   specify an alternative installation prefix
-  -q, -quiet        suppress all normal output
-  -s, -silent       suppress stderr output, except for things that are emitted
-                    by -csh-verbose, -sh-verbose.
-  -v, -version VER  specify alternative OpenFOAM version (eg, 3.0, 1612, ...)
-  -csh | -sh        produce output suitable for a csh or sh 'eval'
-  -csh-verbose,
-  -sh-verbose       with additional verbosity
-  -help             print the usage
+       foamEtcFile [OPTION] [-list|-list-test] [fileName]
 
-  Locate user/group/shipped file with semantics similar to the
+options:
+  -a, -all          Return all files (otherwise stop after the first match)
+  -l, -list         List directories or files to be checked
+  -list-test        List (existing) directories or files to be checked
+  -mode=MODE        Any combination of u(user), g(group), o(other)
+  -prefix=DIR       Specify an alternative installation prefix
+  -version=VER      Specify alternative OpenFOAM version (eg, 3.0, 1612, ...)
+  -csh | -sh        Produce output suitable for a csh or sh 'eval'
+  -csh-verbose | -sh-verbose
+                    As per -csh | -sh, with additional verbosity
+  -q, -quiet        Suppress all normal output
+  -s, -silent       Suppress stderr, except -csh-verbose, -sh-verbose output
+  -help             Print the usage
+
+Locate user/group/other file with semantics similar to the
 ~OpenFOAM/fileName expansion.
 
-  Many options can be specified as a single character, but must not be grouped.
+Single character options must not be grouped. Equivalent options:
+    -mode=MODE,   -mode MODE,   -m MODE
+    -prefix=DIR,  -prefix DIR,  -p DIR
+    -version=VER, -version VER, -v VER
 
 Exit status
     0  when the file is found. Print resolved path to stdout.
@@ -79,74 +91,117 @@ options:
 USAGE
     exit 1
 }
+
+# Report error and exit
+die()
+{
+    [ "${optQuiet:-$optSilent}" = true ] && exit 1
+    exec 1>&2
+    echo
+    echo "Error encountered:"
+    while [ "$#" -ge 1 ]; do echo "    $1"; shift; done
+    echo
+    echo "See 'foamEtcFile -help' for usage"
+    echo
+    exit 1
+}
+
+#-------------------------------------------------------------------------------
+binDir="${0%/*}"                # The bin dir
+projectDir="${binDir%/bin}"     # The project dir
+prefixDir="${projectDir%/*}"    # The prefix dir (same as $WM_PROJECT_INST_DIR)
+
+# Could not resolve projectDir, prefixDir? (eg, called as ./bin/foamEtcFile)
+if [ "$prefixDir" = "$projectDir" ]
+then
+    binDir="$(cd $binDir && pwd -L)"
+    projectDir="${binDir%/bin}"
+    prefixDir="${projectDir%/*}"
+fi
+projectDirName="${projectDir##*/}"      # The project directory name
+
+projectVersion="$WM_PROJECT_VERSION"    # Empty? - will be treated later
+userDir="$HOME/.OpenFOAM"               # Hard-coded as per foamVersion.H
+
 #-------------------------------------------------------------------------------
 
-# The bin dir:
-binDir="${0%/*}"
-
-# The project dir:
-projectDir="${binDir%/bin}"
-
-# The prefix dir (same as $FOAM_INST_DIR):
-prefixDir="${projectDir%/*}"
-
-# The name used for the project directory
-projectDirName="${projectDir##*/}"
-
-# The versionNum is used for debian packaging
-unset versionNum
-
-#
+# Guess project version or simply get the stem part of the projectDirName.
 # Handle standard and debian naming conventions.
-# - projectDirBase: projectDirName without the version
-# - version
-# - versionNum (debian only)
 #
+# - projectVersion: update unless already set
+#
+# Helper variables:
+# - dirBase (for reassembling name) == projectDirName without the version
+# - versionNum (debian packaging)
+unset dirBase versionNum
+guessVersion()
+{
+    local version
+
     case "$projectDirName" in
-OpenFOAM-* | openfoam-*)        # OpenFOAM-<VERSION> or openfoam-<VERSION>
-    projectDirBase="${projectDirName%%-*}-"
+    (OpenFOAM-* | openfoam-*)
+        # Standard naming: OpenFOAM-<VERSION> or openfoam-<VERSION>
+        dirBase="${projectDirName%%-*}-"
         version="${projectDirName#*-}"
+        version="${version%%*-}" # Extra safety, eg openfoam-version-packager
         ;;
 
-openfoam[0-9]*)                 # Debian: openfoam<VERSION>
-    projectDirBase="openfoam"
-    versionNum="${projectDirName#openfoam}"
-    case "${#versionNum}" in
-    (2|3|4) # Convert digits version number to decimal delineated
+    (OpenFOAM+* | openfoam+*)
+        # Alternative naming: OpenFOAM+<VERSION> or openfoam+<VERSION>
+        dirBase="${projectDirName%%+*}+"
+        version="${projectDirName#*+}"
+        version="${version%%*-}" # Extra safety, eg openfoam-version-packager
+        ;;
+
+    (openfoam[0-9]*)
+        # Debian naming: openfoam<VERSION>
+        dirBase="openfoam"
+        version="${projectDirName#openfoam}"
+        versionNum="$version"
+
+        # Convert digits version number to decimal delineated
+        case "${#versionNum}" in (2|3|4)
             version=$(echo "$versionNum" | sed -e 's@\([0-9]\)@\1.@g')
             version="${version%.}"
             ;;
-
-    (*) # Fallback - use current environment setting
-        version="$WM_PROJECT_VERSION"
-        ;;
         esac
+
+        # Ignore special treatment if no decimals were inserted.
+        [ "${#version}" -gt "${#versionNum}" ] || unset versionNum
         ;;
 
-*)
-    echo "foamEtcFile error: unknown/unsupported naming convention" 1>&2
-    exit 1
+    (*)
+        die "unknown/unsupported naming convention for '$projectDirName'"
         ;;
     esac
 
-
-# Set version and update versionNum, projectDirName accordingly
-setVersion()
-{
-    version="$1"
-
-    # Convert x.y.z -> xyz version (if installation looked like debian)
-    [ -n "$versionNum" ] && versionNum=$(echo "$version" | sed -e 's@\.@@g')
-
-    projectDirName="$projectDirBase${versionNum:-${version}}"
+    # Set projectVersion if required
+    : ${projectVersion:=$version}
 }
 
 
-# Default mode is always 'ugo'
-mode=ugo
-unset optAll optList optShell
+# Set projectVersion and update versionNum, projectDirName accordingly
+setVersion()
+{
+    projectVersion="$1"
 
-# parse options
+    # Need dirBase when reassembling projectDirName
+    [ -n "$dirBase" ] || guessVersion
+
+    # Debian: update x.y.z -> xyz version
+    if [ -n "$versionNum" ]
+    then
+        versionNum=$(echo "$projectVersion" | sed -e 's@\.@@g')
+    fi
+
+    projectDirName="$dirBase${versionNum:-$projectVersion}"
+}
+
+
+optMode=ugo         # Default mode is always 'ugo'
+unset optAll optList optShell optVersion
+
+# Parse options
 while [ "$#" -gt 0 ]
 do
     case "$1" in
@@ -161,34 +216,38 @@ do
         optList=true
         unset optShell
         ;;
+    -list-test)
+        optList='test'
+        unset optShell
+        ;;
     -csh | -sh | -csh-verbose | -sh-verbose)
         optShell="${1#-}"
         unset optAll
         ;;
     -mode=[ugo]*)
-        mode="${1#*=}"
+        optMode="${1#*=}"
         ;;
     -prefix=/*)
         prefixDir="${1#*=}"
         prefixDir="${prefixDir%/}"
         ;;
     -version=*)
-        setVersion "${1#*=}"
+        optVersion="${1#*=}"
         ;;
     -m | -mode)
-        mode="$2"
+        optMode="$2"
+        shift
         # Sanity check. Handles missing argument too.
-        case "$mode" in
-        [ugo]*)
+        case "$optMode" in
+        ([ugo]*)
             ;;
-        *)
-            usage "invalid mode '$mode'"
+        (*)
+            die "invalid mode '$optMode'"
             ;;
         esac
-        shift
         ;;
     -p | -prefix)
-        [ "$#" -ge 2 ] || usage "'$1' option requires an argument"
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
         prefixDir="${2%/}"
         shift
         ;;
@@ -199,8 +258,8 @@ do
         optSilent=true
         ;;
     -v | -version)
-        [ "$#" -ge 2 ] || usage "'$1' option requires an argument"
-        setVersion "$2"
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
+        optVersion="$2"
         shift
         ;;
     --)
@@ -208,7 +267,7 @@ do
         break
         ;;
     -*)
-        usage "unknown option: '$1'"
+        die "unknown option: '$1'"
         ;;
     *)
         break
@@ -217,12 +276,27 @@ do
     shift
 done
 
-# Update projectDir accordingly
+
+#-------------------------------------------------------------------------------
+
+if [ -n "$optVersion" ]
+then
+    setVersion $optVersion
+elif [ -z "$projectVersion" ]
+then
+    guessVersion
+fi
+
+# Updates:
+# - projectDir  for changes via -prefix or -version
+# - groupDir    for changes via -prefix
 projectDir="$prefixDir/$projectDirName"
+groupDir="${WM_PROJECT_SITE:-$prefixDir/site}"
+
 
 # Debugging:
 # echo "Installed locations:" 1>&2
-# for i in projectDir prefixDir projectDirName version versionNum
+# for i in projectDir prefixDir projectDirName projectVersion
 # do
 #     eval echo "$i=\$$i" 1>&2
 # done
@@ -235,19 +309,17 @@ fileName="${1#~OpenFOAM/}"
 
 # Define the various places to be searched:
 unset dirList
-case "$mode" in (*u*)   # (U)ser
-    dir="$HOME/.${WM_PROJECT:-OpenFOAM}"
-    dirList="$dirList $dir/$version $dir"
+case "$optMode" in (*u*) # (U)ser
+    dirList="$dirList $userDir/$projectVersion $userDir"
     ;;
 esac
 
-case "$mode" in (*g*)   # (G)roup == site
-    dir="${WM_PROJECT_SITE:-$prefixDir/site}"
-    dirList="$dirList $dir/$version $dir"
+case "$optMode" in (*g*) # (G)roup == site
+    dirList="$dirList $groupDir/$projectVersion $groupDir"
     ;;
 esac
 
-case "$mode" in (*o*)   # (O)ther == shipped
+case "$optMode" in (*o*) # (O)ther == shipped
     dirList="$dirList $projectDir/etc"
     ;;
 esac
@@ -259,30 +331,54 @@ set -- $dirList
 #
 
 exitCode=0
-if [ "$optList" = true ]
+if [ -n "$optList" ]
 then
 
     # List directories, or potential file locations
-    [ "$nArgs" -le 1 ] || usage
+    [ "$nArgs" -le 1 ] || \
+    die "-list expects 0 or 1 filename, but $nArgs provided"
 
     # A silly combination, but -quiet does have precedence
     [ -n "$optQuiet" ] && exit 0
 
-    for dir
-    do
+    # Test for directory or file too?
+    if [ "$optList" = "test" ]
+    then
+        exitCode=2  # Fallback to a general error (file not found)
+
         if [ "$nArgs" -eq 1 ]
         then
-            echo "$dir/$fileName"
-        else
-            echo "$dir"
+            for dir
+            do
+                resolved="$dir/$fileName"
+                if [ -f "$resolved" ]
+                then
+                    echo "$resolved"
+                    exitCode=0  # OK
                 fi
             done
+        else
+            for dir
+            do
+                if [ -d "$dir" ]
+                then
+                    echo "$dir"
+                    exitCode=0  # OK
+                fi
+            done
+        fi
+    else
+        for dir
+        do
+            echo "$dir${fileName:+/}$fileName"
+        done
+    fi
 
 else
 
-    [ "$nArgs" -eq 1 ] || usage
+    [ "$nArgs" -eq 1 ] || die "One filename expected - $nArgs provided"
 
-    exitCode=2  # Fallback to a general error, eg file not found
+    exitCode=2  # Fallback to a general error (file not found)
 
     for dir
     do
@@ -316,7 +412,6 @@ else
 
 fi
 
-
 exit $exitCode
 
 #------------------------------------------------------------------------------

bin/foamExec

@@ -26,7 +26,7 @@
 #     foamExec
 #
 # Description
-#     Usage: foamExec [-v foamVersion] <foamCommand> ...
+#     Usage: foamExec [-version=foamVersion] <foamCommand> ...
 #
 #     Runs the <foamVersion> version of executable <foamCommand>
 #     with the rest of the arguments.
@@ -34,7 +34,7 @@
 #     Can also be used for parallel runs. For example,
 #     \code
 #         mpirun -np <nProcs> \
-#             foamExec -version <foamVersion> <foamCommand> ... -parallel
+#             foamExec -version=VERSION <foamCommand> ... -parallel
 #     \endcode
 #
 # Note
@@ -55,34 +55,29 @@ usage() {
 Usage: ${0##*/} [OPTION] <application> ...
 
 options:
-  -prefix <dir>     specify an alternative installation prefix
+  -mode=MODE        Any combination of u(user), g(group), o(other)
+  -prefix=DIR       Specify an alternative installation prefix
                     pass through to foamEtcFile and set as FOAM_INST_DIR
-  -version <ver>    specify an alternative OpenFOAM version
+  -version=VER      Specify alternative OpenFOAM version (eg, 3.0, 1612, ...)
                     pass through to foamEtcFile
-  -help             print the usage
+  -help             Print the usage
 
-* run a particular OpenFOAM version of <application>
+Run a particular OpenFOAM version of <APPLICATION>
 
 USAGE
     exit 1
 }
 
 #-------------------------------------------------------------------------------
+binDir="${0%/*}"                # The bin dir
+projectDir="${binDir%/bin}"     # The project dir
+prefixDir="${projectDir%/*}"    # The prefix dir (same as $WM_PROJECT_INST_DIR)
 
-# the bin dir:
-binDir="${0%/*}"
+## projectDirName="${projectDir##*/}"      # The project directory name
 
-# the project dir:
-projectDir="${binDir%/bin}"
+version="${WM_PROJECT_VERSION:-unknown}"
 
-# the prefix dir (same as $FOAM_INST_DIR):
-prefixDir="${projectDir%/*}"
-
-# # the name used for the project directory
-# projectDirName="${projectDir##*/}"
-
-
-unset etcOpts version
+unset etcOpts
 # parse options
 while [ "$#" -gt 0 ]
 do
@@ -90,6 +85,17 @@ do
     -h | -help)
         usage
         ;;
+    -mode=*)
+        etcOpts="$etcOpts $1"       # pass-thru to foamEtcFile
+        ;;
+    -prefix=/*)
+        etcOpts="$etcOpts $1"       # pass-thru to foamEtcFile
+        prefixDir="${1#*=}"
+        ;;
+    -version=*)
+        etcOpts="$etcOpts $1"       # pass-thru to foamEtcFile
+        version="${1#*=}"
+        ;;
     -m | -mode)
         [ "$#" -ge 2 ] || usage "'$1' option requires an argument"
         etcOpts="$etcOpts $1 $2"    # pass-thru to foamEtcFile
@@ -127,15 +133,15 @@ done
 #
 sourceRc()
 {
-    foamDotFile="$($binDir/foamEtcFile $etcOpts bashrc)" || {
-        echo "Error : bashrc file could not be found for OpenFOAM-${version:-${WM_PROJECT_VERSION:-???}}" 1>&2
+    rcFile="$($binDir/foamEtcFile $etcOpts bashrc)" || {
+        echo "Error : bashrc file could not be found for OpenFOAM-$version" 1>&2
         exit 1
     }
 
     # set to consistent value before sourcing the bashrc
     export FOAM_INST_DIR="$prefixDir"
 
-    . $foamDotFile $FOAM_SETTINGS
+    . $rcFile $FOAM_SETTINGS
 }
 
 

bin/foamPrintJobs

@@ -34,6 +34,8 @@ Script=${0##*/}
 JOBSTRING='%4s %8s %20s %10s %8s %4s %12s %12s %20s\n'
 DEFSTATEFILE=$HOME/.OpenFOAM/foamCheckJobs.out
 
+# The default is "~/.OpenFOAM/jobControl"
+: ${FOAM_JOB_DIR:=$HOME/.OpenFOAM/jobControl}
 
 #-------------------------------------------------------------------------------
 #
@@ -120,12 +122,6 @@ fi
 
 #- Check a few things
 
-if [ ! "$FOAM_JOB_DIR" ]
-then
-    echo "$Script : FOAM_JOB_DIR environment variable not set."
-    echo
-    exit 1
-fi
 if [ ! -d "$FOAM_JOB_DIR" ]
 then
     echo "$Script : directory does not exist."

bin/paraFoam

@@ -172,15 +172,13 @@ fvControls="system"
 
 if [ -n "$regionName" ]
 then
-    if [ ! -d constant/$regionName ]
-    then
+    [ -d constant/$regionName ] || {
         echo "FATAL ERROR: Region $regionName does not exist" 1>&2
         exit 1
-    else
+    }
     caseFile="$caseName{$regionName}.$extension"
     fvControls="$fvControls/$regionName"
 fi
-fi
 
 case "${optTouch:-false}" in
 all)
@@ -212,11 +210,42 @@ true)
 esac
 
 
-# Parent directory for normal or parallel results
-case "$caseName" in
-    processor*) parentDir=".." ;;
-    *)          parentDir="."  ;;
-esac
+# Check existence of some essential OpenFOAM files.
+# If caseName appears to be a processor directory, check parent as fallback
+hasFiles() {
+    local warn="Cannot locate OpenFOAM-format case files:"
+    local parent
+    case "$caseName" in (processor*) parent="../" ;; esac
+
+    for file
+    do
+        if [ -s "$file" ]
+        then
+            continue
+        elif [ -n "$parent" -a -s "$parent$file" ]
+        then
+            continue
+        else
+            # Not found
+            [ -n "$warn" ] && echo "$warn" 1>&2
+            unset warn
+            if [ -n "$parent" ]
+            then
+                echo "    $file, or $parent$file" 1>&2
+            else
+                echo "    $file" 1>&2
+            fi
+        fi
+    done
+
+    if [ -n "$warn" ]
+    then
+        return 0        # No warnings were triggered
+    else
+        echo 1>&2       # Emit an additional separator line
+        return 1
+    fi
+}
 
 
 if [ "${hasData:-false}" = true ]
@@ -228,7 +257,7 @@ then
 else
 
     # Check existence of essential files
-    warn="WARN file does not exist:"
+    warn=false
     case $extension in
         blockMesh)
             blockMeshDict=system/blockMeshDict
@@ -236,40 +265,22 @@ else
             then
                 blockMeshDict=constant/polyMesh/blockMeshDict
             fi
-            for check in \
-                system/controlDict \
-                    $blockMeshDict \
-                ;
-            do
-                [ -s "$parentDir/$check" ] || {
-                    [ -n "$warn" ] && echo "$warn" 1>&2
-                    echo "    $parentDir/$check" 1>&2
-                    unset warn
-                }
-            done
+
+            hasFiles system/controlDict $blockMeshDict || warn=true
             ;;
 
         OpenFOAM)
-            for check in \
+            hasFiles \
                 system/controlDict \
                 $fvControls/fvSchemes \
-                    $fvControls/fvSolution \
-                ;
-            do
-                [ -s "$parentDir/$check" ] || {
-                    [ -n "$warn" ] && echo "$warn" 1>&2
-                    echo "    $parentDir/$check" 1>&2
-                    unset warn
-                }
-            done
+                $fvControls/fvSolution || warn=true
             ;;
     esac
 
-    [ -n "$warn" ] || {
-        echo "Cannot locate OpenFOAM-format case files"
-        echo -n "Would you like to open ParaView anyway <Y|n>:"
+    [ "${warn:-false}" = false ] || {
+        echo -n "Would you like to open paraview anyway <Y|n>: "
         read open
-        [ "$open" = "" ] || echo $open | grep -iqE "^y" && paraview
+        case "${open:-y}" in ([Yy]*) paraview ;; esac
         exit
     }