scripts: Reformat with consistent section separators

.gitignore

@@ -83,5 +83,3 @@ doc/Doxygen/DTAGS
 
 # Ignore the test directory
 /tutorialsTest
-
-# end-of-file

Allwmake

@@ -43,4 +43,4 @@ then
 fi
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/Allwmake

@@ -24,4 +24,4 @@ wmake -all utilities $*
 wmake -all solvers $*
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/compressible/rhoCentralFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso BCs
 wclean
 wclean rhoCentralDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/compressible/rhoCentralFoam/Allwmake

@@ -4,4 +4,4 @@ set -x
 
 (wmake libso BCs && wmake && wmake rhoCentralDyMFoam)
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/compressibleInterFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso twoPhaseMixtureThermo
 wclean
 wclean compressibleInterDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/compressibleInterFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso twoPhaseMixtureThermo
 wmake
 wmake compressibleInterDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/compressibleMultiphaseInterFoam/Allwclean

@@ -5,4 +5,4 @@ set -x
 wclean libso multiphaseMixtureThermo
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/compressibleMultiphaseInterFoam/Allwmake

@@ -5,4 +5,4 @@ set -x
 wmake libso multiphaseMixtureThermo
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/driftFluxFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso mixtureViscosityModels
 wclean libso relativeVelocityModels
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/driftFluxFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso mixtureViscosityModels
 wmake libso relativeVelocityModels
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/interPhaseChangeFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso phaseChangeTwoPhaseMixtures
 wclean
 wclean interPhaseChangeDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/interPhaseChangeFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso phaseChangeTwoPhaseMixtures
 wmake
 wmake interPhaseChangeDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/multiphaseEulerFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso multiphaseSystem
 wclean libso interfacialModels
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/multiphaseEulerFoam/Allwmake

@@ -7,4 +7,4 @@ wmake libso multiphaseSystem
 wmake libso interfacialModels
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/multiphaseInterFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso multiphaseMixture
 wclean
 wclean multiphaseInterDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/multiphaseInterFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso multiphaseMixture
 wmake
 wmake multiphaseInterDyMFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/Allwclean

@@ -8,4 +8,4 @@ wclean libso interfacialCompositionModels
 reactingTwoPhaseEulerFoam/Allwclean
 reactingMultiphaseEulerFoam/Allwclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/Allwmake

@@ -10,4 +10,4 @@ wmake libso interfacialCompositionModels
 reactingTwoPhaseEulerFoam/Allwmake
 reactingMultiphaseEulerFoam/Allwmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/reactingMultiphaseEulerFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso multiphaseSystem
 wclean libso multiphaseCompressibleTurbulenceModels
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/reactingMultiphaseEulerFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso multiphaseSystem
 wmake libso multiphaseCompressibleTurbulenceModels
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/reactingTwoPhaseEulerFoam/Allwclean

@@ -6,4 +6,4 @@ wclean libso twoPhaseSystem
 wclean libso twoPhaseCompressibleTurbulenceModels
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/reactingEulerFoam/reactingTwoPhaseEulerFoam/Allwmake

@@ -6,4 +6,4 @@ wmake libso twoPhaseSystem
 wmake libso twoPhaseCompressibleTurbulenceModels
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/twoPhaseEulerFoam/Allwclean

@@ -7,4 +7,4 @@ wclean libso interfacialModels
 wclean libso phaseCompressibleTurbulenceModels
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/solvers/multiphase/twoPhaseEulerFoam/Allwmake

@@ -8,4 +8,4 @@ wmake libso interfacialModels
 wmake libso phaseCompressibleTurbulenceModels
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/test/fieldMapping/pipe1D/Allrun

@@ -20,4 +20,4 @@ mv "log.$application" "log.$application-inflate"
 runApplication $application false
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/test/hexRef8/block/Allrun

@@ -20,4 +20,4 @@ mv "log.$application" "log.$application-inflate"
 runApplication $application false
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/test/volField/cavity/Allrun

@@ -14,4 +14,4 @@ runApplication blockMesh
 
 runApplication $application
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/conversion/Optional/Allwmake

@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 # Build optional components (eg, may depend on third-party libraries)
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 cd ${0%/*} || exit 1    # Run from this directory
 set -x
 
@@ -14,4 +14,4 @@ then
     wmake ccm26ToFoam
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/Allwmake

@@ -13,4 +13,4 @@ then
 fi
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/extrude2DMesh/Allwclean

@@ -5,4 +5,4 @@ set -x
 wclean libso extrude2DMesh
 wclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/extrude2DMesh/Allwmake

@@ -5,4 +5,4 @@ set -x
 wmake libso extrude2DMesh
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/foamyMesh/Allwclean

@@ -10,4 +10,4 @@ wclean foamyHexMeshSurfaceSimplify
 wclean foamyHexMeshBackgroundMesh
 wclean cellSizeAndAlignmentGrid
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/foamyMesh/Allwmake

@@ -11,4 +11,4 @@ wmake foamyHexMesh
 #wmake cellSizeAndAlignmentGrid
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/generation/foamyMesh/foamyHexMeshSurfaceSimplify/Allwmake

@@ -7,4 +7,4 @@ then
     wmake
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/manipulation/renumberMesh/Allwmake

@@ -19,4 +19,4 @@ fi
 
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/mesh/manipulation/setSet/Allwmake

@@ -15,4 +15,4 @@ fi
 
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/miscellaneous/foamHelp/Allwclean

@@ -5,4 +5,4 @@ wclean libso helpTypes
 wclean
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/miscellaneous/foamHelp/Allwmake

@@ -5,4 +5,4 @@ wmake libso helpTypes
 wmake
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/dataConversion/foamToTecplot360/Allwmake

@@ -8,4 +8,4 @@ else
     wmake
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/Allwclean

@@ -6,4 +6,4 @@ wclean libso vtkPV3Readers
 PV3blockMeshReader/Allwclean
 PV3FoamReader/Allwclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/Allwmake

@@ -26,4 +26,4 @@ case "$ParaView_VERSION" in
     ;;
 esac
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/PV3FoamReader/Allwclean

@@ -8,4 +8,4 @@ rm -f $FOAM_LIBBIN/libPV3FoamReader* 2>/dev/null
 rm -rf PV3FoamReader/Make
 wclean libso vtkPV3Foam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/PV3FoamReader/Allwmake

@@ -14,4 +14,4 @@ then
     )
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/PV3blockMeshReader/Allwclean

@@ -8,4 +8,4 @@ rm -f $FOAM_LIBBIN/libPV3blockMeshReader*  2>/dev/null
 rm -rf PV3blockMeshReader/Make
 wclean libso vtkPV3blockMesh
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PV3Readers/PV3blockMeshReader/Allwmake

@@ -14,4 +14,4 @@ then
     )
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/Allwclean

@@ -6,4 +6,4 @@ wclean libso vtkPVReaders
 PVblockMeshReader/Allwclean
 PVFoamReader/Allwclean
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/Allwmake

@@ -26,4 +26,4 @@ case "$ParaView_VERSION" in
     ;;
 esac
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/PVFoamReader/Allwclean

@@ -8,4 +8,4 @@ rm -f $FOAM_LIBBIN/libPVFoamReader* 2>/dev/null
 rm -rf PVFoamReader/Make
 wclean libso vtkPVFoam
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/PVFoamReader/Allwmake

@@ -14,4 +14,4 @@ then
     )
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/PVblockMeshReader/Allwclean

@@ -8,4 +8,4 @@ rm -f $FOAM_LIBBIN/libPVblockMeshReader*  2>/dev/null
 rm -rf PVblockMeshReader/Make
 wclean libso vtkPVblockMesh
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/PVReaders/PVblockMeshReader/Allwmake

@@ -14,4 +14,4 @@ then
     )
 fi
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/postProcessing/graphics/ensightFoamReader/Allwmake

@@ -3,4 +3,4 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 wmake libso
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

applications/utilities/preProcessing/wallFunctionTable/Allwmake

@@ -5,4 +5,4 @@ set -x
 wmake libso tabulatedWallFunction
 wmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

bin/findEmptyMake

@@ -3,7 +3,7 @@
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
 #-------------------------------------------------------------------------------
 # License
@@ -79,4 +79,4 @@ do
     done
 
 done
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

bin/foamCleanPath

@@ -3,7 +3,7 @@
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011-2013 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
 #-------------------------------------------------------------------------------
 # License
@@ -153,4 +153,4 @@ IFS="$oldIFS"
 ##DEBUG echo "output>$dirList<" 1>&2
 echo "$dirList"
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

bin/foamCopySettings

@@ -1,11 +1,11 @@
 #!/bin/sh
-#-------------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
-#-------------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM.
 #
@@ -35,7 +35,7 @@
 # Note
 #     The foamCopySettings.rc (found with the ~OpenFOAM expansion) can be used
 #     to add any custom rsync options.
-#-------------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 Script=${0##*/}
 
 #------------------------------------------------------------------------------
@@ -148,4 +148,4 @@ do
     esac
 done
 
-# ------------------------------------------------------------------ end-of-file
+#------------------------------------------------------------------------------

bin/foamUpdateCaseFileHeader

@@ -3,7 +3,7 @@
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
 # License
@@ -141,4 +141,4 @@ do
     fi
 done
 
-#------------------------------------------------------------------ end-of-file
+#------------------------------------------------------------------------------

bin/tools/doxyFilter-ignore.awk

@@ -1,10 +1,10 @@
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM.
 #
@@ -30,7 +30,7 @@
 #     - Surround the contents of an entire file with @cond / @endcond
 #       to skip documenting all classes/variables
 #
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 BEGIN {
    print "//! @file %filePath%"
    print "//! @cond OpenFOAMIgnoreAppDoxygen"
@@ -41,4 +41,4 @@ BEGIN {
 END {
    print "//! @endcond"
 }
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

bin/tools/doxyFilter-top.awk

@@ -1,8 +1,8 @@
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
 # License
@@ -30,7 +30,7 @@
 #     - This is useful for application files in which only the first
 #       block documents the application itself.
 #
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 BEGIN {
     state = 0
 }
@@ -78,4 +78,4 @@ END {
     }
 }
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

bin/tools/doxyFilter.awk

@@ -1,10 +1,10 @@
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011-2015 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM.
 #
@@ -39,7 +39,7 @@
 #         */
 #     The intermediate "/*! ... */" block is left-justified to handle
 #     possible verbatim text
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 
 BEGIN {
     state = 0
@@ -86,4 +86,4 @@ BEGIN {
     next
 }
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

bin/tools/doxyFilter.sed

@@ -1,11 +1,11 @@
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # Script
 #     doxyFilter.sed
 #
 # Description
 #     Transform human-readable tags such as 'Description' into the Doxygen
 #     equivalent
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 
 # new FSF address
 /^License/,/\*\//{
@@ -182,4 +182,4 @@ s#\\linebreak#<br>#g
 
 }
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

doc/Allwmake

@@ -7,4 +7,4 @@ chmod a+rX $WM_PROJECT_DIR $WM_PROJECT_DIR/doc Doxygen
 
 Doxygen/Allwmake
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

doc/Doxygen/Allwmake

@@ -81,4 +81,4 @@ echo
 echo "Done doxygen"
 echo
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

doc/tools/find-its

@@ -1,5 +1,5 @@
 #!/bin/sh
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # Script
 #     find-its
 #
@@ -8,10 +8,10 @@
 #     This contraction (== "it is") looks too much like "its" (possesive)
 #     and confuses non-native (and some native) English speakers.
 #
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 set -x
 cd $WM_PROJECT_DIR || exit 1
 
 git grep -e "it's"
 
-#------------------------------------------------------------------ end-of-file
+#------------------------------------------------------------------------------

doc/tools/find-trailingspace

@@ -1,12 +1,12 @@
 #!/bin/bash
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 # Script
 #     find-trailingspace
 #
 # Description
 #     Search for files with trailing whitesapce
 #
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------
 set -x
 cd $WM_PROJECT_DIR || exit 1
 
@@ -14,4 +14,4 @@ tab=$'\t'
 
 git grep -c -E "[ $tab]+"'$' -- $@
 
-#------------------------------------------------------------------ end-of-file
+#------------------------------------------------------------------------------

etc/bashrc

@@ -250,4 +250,4 @@ fi
 unset cleaned foamClean foamInstall foamOldDirs
 unset _foamSource _foamEval
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/codeTemplates/foamScript

@@ -3,7 +3,7 @@
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2015 OpenFOAM Foundation
+#   \\  /    A nd           | Copyright (C) 2015-2016 OpenFOAM Foundation
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
 # License
@@ -29,4 +29,4 @@
 #
 #------------------------------------------------------------------------------
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/CGAL

@@ -51,4 +51,4 @@ endif
 
 unset boost_version cgal_version
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.csh/aliases

@@ -80,4 +80,4 @@ else
     alias foamSite 'cd $WM_PROJECT_INST_DIR/site'
 endif
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.csh/ensight

@@ -51,4 +51,4 @@ else
     unsetenv CEI_HOME
 endif
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.csh/example/compiler

@@ -48,4 +48,4 @@ case Gcc45++0x:
     breaksw
 endsw
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/example/openmpi

@@ -33,4 +33,4 @@
 # Modified openmpi settings
 setenv FOAM_MPI openmpi-1.4.3
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/example/paraview

@@ -43,4 +43,4 @@ if ( $status == 0 ) source $foamFile ParaView_VERSION=3.12.0
 
 unset foamFile
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.csh/example/prefs.csh

@@ -49,4 +49,4 @@
 # setenv WM_MPLIB SYSTEMOPENMPI
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/mpi

@@ -274,4 +274,4 @@ else
     setenv MPI_BUFFER_SIZE $minBufferSize
 endif
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/paraview

@@ -131,4 +131,4 @@ endif
 
 unset cleaned cmake paraviewInstDir paraviewPython
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.csh/settings

@@ -343,4 +343,4 @@ endsw
 unset minBufferSize
 unsetenv foamCompiler
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.csh/unset

@@ -191,4 +191,4 @@ unalias foam3rdParty
 unalias foamSite
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.sh/CGAL

@@ -54,4 +54,4 @@ fi
 
 unset boost_version cgal_version
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/aliases

@@ -86,4 +86,4 @@ else
     alias foamSite='cd $WM_PROJECT_INST_DIR/site'
 fi
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/ensight

@@ -57,4 +57,4 @@ else
     unset CEI_HOME
 fi
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/example/compiler

@@ -46,4 +46,4 @@ Gcc45 | Gcc45++0x)
     ;;
 esac
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.sh/example/openmpi

@@ -33,4 +33,4 @@
 # Modified openmpi settings
 export FOAM_MPI=openmpi-1.4.3
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.sh/example/paraview

@@ -43,4 +43,4 @@ foamFile=$($WM_PROJECT_DIR/bin/foamEtcFile -mode o config.sh/paraview 2>/dev/nul
 
 unset foamFile
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/example/prefs.sh

@@ -49,4 +49,4 @@
 # export WM_MPLIB=SYSTEMOPENMPI
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.sh/gperftools

@@ -38,4 +38,4 @@ GPERFTOOLS_ARCH_PATH=$gperftools_install/$GPERFTOOLS_VERSION
 export PATH=$GPERFTOOLS_ARCH_PATH/bin:$PATH
 export LD_LIBRARY_PATH=$GPERFTOOLS_ARCH_PATH/lib:$LD_LIBRARY_PATH
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/metis

@@ -36,4 +36,4 @@
 export METIS_VERSION=metis-5.1.0
 export METIS_ARCH_PATH=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER/$METIS_VERSION
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/mpi

@@ -267,4 +267,4 @@ then
 fi
 export MPI_BUFFER_SIZE
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/paraview

@@ -144,4 +144,4 @@ fi
 unset _foamParaviewEval
 unset cleaned cmake paraviewInstDir paraviewPython
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/scotch

@@ -36,4 +36,4 @@
 export SCOTCH_VERSION=scotch_6.0.3
 export SCOTCH_ARCH_PATH=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER$WM_LABEL_OPTION/$SCOTCH_VERSION
 
-# -----------------------------------------------------------------------------
+#------------------------------------------------------------------------------

etc/config.sh/settings

@@ -365,4 +365,4 @@ esac
 #keep _foamAddPath _foamAddLib _foamAddMan
 unset foamCompiler minBufferSize
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/config.sh/unset

@@ -170,4 +170,4 @@ unalias foam3rdParty
 unalias foamSite
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/cshrc

@@ -238,4 +238,4 @@ endif
 unset cleaned foamClean foamInstall foamOldDirs
 unalias _foamSource
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

etc/templates/axisymmetricJet/Allrun

@@ -11,4 +11,4 @@ runApplication extrudeMesh
 
 runApplication $application
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

src/Allwmake

@@ -81,4 +81,4 @@ postProcessing/Allwmake $targetType $*
 wmake $targetType sixDoFRigidBodyMotion
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

src/OSspecific/POSIX/Allwmake

@@ -21,4 +21,4 @@ fi
 # make (non-shared by default) object
 wmake $targetType
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

src/Pstream/Allwmake

@@ -39,4 +39,4 @@ case "$WM_MPLIB" in
 esac
 
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

src/TurbulenceModels/Allwmake

@@ -12,4 +12,4 @@ wmake $targetType compressible
 wmakeLnInclude phaseIncompressible
 wmakeLnInclude phaseCompressible
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------

src/conversion/Allwmake

@@ -8,4 +8,4 @@ set -x
 
 wmake $targetType
 
-# ----------------------------------------------------------------- end-of-file
+#------------------------------------------------------------------------------