zhyang-dev/openfoam
1
0
Fork 0
mirror of https://develop.openfoam.com/Development/openfoam.git synced 2025-11-28 03:28:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

STYLE: centralize example dictionaries under etc/ (issue #1074)

Browse Source 
- as well as being more convenient to find, this is necessary when the
  OpenFOAM installation is without sources or tutorials
This commit is contained in:
Mark Olesen
2019-01-26 17:46:08 +01:00
parent dd23155d81
commit 3b91160027
49 changed files with 7 additions and 52 deletions
Download Patch File Download Diff File Expand all files Collapse all files

90
applications/utilities/mesh/advanced/collapseEdges/collapseDict
View File

@ -1,90 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: v1812 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object collapseDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
// If on, after collapsing check the quality of the mesh. If bad faces are
// generated then redo the collapsing with stricter filtering.
controlMeshQuality on;
collapseEdgesCoeffs
{
// Edges shorter than this absolute value will be merged
minimumEdgeLength 1e-6;
// The maximum angle between two edges that share a point attached to
// no other edges
maximumMergeAngle 30;
}
collapseFacesCoeffs
{
// The initial face length factor
initialFaceLengthFactor 0.5;
// If the face can't be collapsed to an edge, and it has a span less than
// the target face length multiplied by this coefficient, collapse it
// to a point.
maxCollapseFaceToPointSideLengthCoeff 0.3;
// Allow early collapse of edges to a point
allowEarlyCollapseToPoint on;
// Fraction to premultiply maxCollapseFaceToPointSideLengthCoeff by if
// allowEarlyCollapseToPoint is enabled
allowEarlyCollapseCoeff 0.2;
// Defining how close to the midpoint (M) of the projected
// vertices line a projected vertex (X) can be before making this
// an invalid edge collapse
//
// X---X-g----------------M----X-----------g----X--X
//
// Only allow a collapse if all projected vertices are outwith
// guardFraction (g) of the distance form the face centre to the
// furthest vertex in the considered direction
guardFraction 0.1;
}
controlMeshQualityCoeffs
{
// Name of the dictionary that has the mesh quality coefficients used
// by motionSmoother::checkMesh
#include "meshQualityDict";
// The amount that minimumEdgeLength will be reduced by for each
// edge if that edge's collapse generates a poor quality face
edgeReductionFactor 0.5;
// The amount that initialFaceLengthFactor will be reduced by for each
// face if its collapse generates a poor quality face
faceReductionFactor 0.5;
// Maximum number of smoothing iterations for the reductionFactors
maximumSmoothingIterations 2;
// Maximum number of outer iterations is mesh quality checking is enabled
maximumIterations 10;
// Maximum number of iterations deletion of a point can cause a bad face
// to be constructed before it is forced to not be deleted
maxPointErrorCount 5;
}
// ************************************************************************* //

67
applications/utilities/mesh/advanced/collapseEdges/meshQualityDict
View File

@ -1,67 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: v1812 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object meshQualityDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
//- Maximum non-orthogonality allowed. Set to 180 to disable.
maxNonOrtho 65;
//- Max skewness allowed. Set to <0 to disable.
maxBoundarySkewness 50;
//- Max skewness allowed. Set to <0 to disable.
maxInternalSkewness 10;
//- Max concaveness allowed. Is angle (in degrees) below which concavity
// is allowed. 0 is straight face, <0 would be convex face.
// Set to 180 to disable.
maxConcave 80;
//- Minimum pyramid volume. Is absolute volume of cell pyramid.
// Set to a sensible fraction of the smallest cell volume expected.
// Set to very negative number (e.g. -1E30) to disable.
minVol 1e-20;
//- Minimum quality of the tet formed by the face-centre
// and variable base point minimum decomposition triangles and
// the cell centre. This has to be a positive number for tracking
// to work. Set to very negative number (e.g. -1E30) to
// disable.
// <0 = inside out tet,
// 0 = flat tet
// 1 = regular tet
minTetQuality 1e-30;
//- Minimum face area. Set to <0 to disable.
minArea -1;
//- Minimum face twist. Set to <-1 to disable. dot product of face normal
// and face centre triangles normal
minTwist 0.0;
//- Minimum normalised cell determinant
// 1 = hex, <= 0 = folded or flattened illegal cell
minDeterminant 0.001;
//- minFaceWeight (0 -> 0.5)
minFaceWeight 0.02;
//- minVolRatio (0 -> 1)
minVolRatio 0.01;
//must be >0 for Fluent compatibility
minTriangleTwist -1;
// ************************************************************************* //