Sprucing up the tutorials folder and adding -dict to "collapseEdges"

Patch provided by Bruno Santos
Resolves patch application request http://www.openfoam.org/mantisbt/view.php?id=2015

tutorials/Allrun

@@ -38,7 +38,7 @@ cd ${0%/*} || exit 1    # Run from this directory
 logReport()
 {
     caseName=`dirname $1 | sed s/"\(.*\)\.\/"/""/g`
-    app=`echo $1 | sed s/"\(.*\)\."/""/g`
+    app=`echo $1 | sed s/"\(.*\)log\."/""/g`
     appAndCase="Application $app - case $caseName"
 
     fatalError=`grep "FOAM FATAL" $1`

tutorials/combustion/fireFoam/les/oppositeBurningPanels/Allrun

@@ -9,26 +9,31 @@ application=`getApplication`
 
 runApplication blockMesh
 
-runApplication topoSet -dict system/cRefine.topoSetDict
+runApplication -s cRefine \
+    topoSet -dict system/cRefine.topoSetDict
+
 runApplication refineMesh -overwrite -dict system/refineMeshDict
 
-rm log.topoSet
-runApplication topoSet -dict system/f.topoSetDict
+runApplication -s f \
+    topoSet -dict system/f.topoSetDict
 
 # create the pyrolysis region.
 runApplication extrudeToRegionMesh -overwrite
 
 
-rm log.topoSet
-runApplication topoSet -dict system/fBurner.topoSetDict
+runApplication -s fBurner \
+    topoSet -dict system/fBurner.topoSetDict
 
 runApplication createPatch -overwrite
 
-decomposePar -force > log.decomposePar 2>&1
+runApplication -s master \
+    decomposePar -force
 
-decomposePar -region panelRegion > log.decomposeParPanelRegion 2>&1
+runApplication -s panelRegion \
+    decomposePar -region panelRegion
 
-decomposePar -fields > log.decomposePar 2>&1
+runApplication -s fields \
+    decomposePar -fields
 
 runParallel `getApplication`
 

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/Allrun

@@ -18,7 +18,7 @@ done
 
 for i in bottomWater topAir heater leftSolid rightSolid
 do
-   changeDictionary -region $i > log.changeDictionary.$i 2>&1
+   runApplication -s $i  changeDictionary -region $i
 done
 
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun

@@ -22,7 +22,7 @@ done
 
 for i in bottomAir topAir heater leftSolid rightSolid
 do
-   changeDictionary -region $i > log.changeDictionary.$i 2>&1
+   runApplication -s $i  changeDictionary -region $i
 done
 
 

tutorials/heatTransfer/chtMultiRegionSimpleFoam/heatExchanger/Allrun-parallel

@@ -7,16 +7,10 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 ./Allrun.pre
 
-runApplication decomposePar -region air
-mv log.decomposePar log.decomposePar.air
-
-runApplication decomposePar -region porous
-mv log.decomposePar log.decomposePar.porous
+runApplication -s air    decomposePar -region air
+runApplication -s porous decomposePar -region porous
 
 runParallel $(getApplication)
 
-runApplication reconstructPar -latestTime -region air
-mv log.reconstructPar log.reconstructPar.air
-
-runApplication reconstructPar -latestTime -region porous
-mv log.reconstructPar log.reconstructPar.porous
+runApplication -s air    reconstructPar -latestTime -region air
+runApplication -s porous reconstructPar -latestTime -region porous

tutorials/heatTransfer/chtMultiRegionSimpleFoam/heatExchanger/Allrun.pre

@@ -6,20 +6,18 @@ cd ${0%/*} || exit 1    # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
 #create meshes
-runApplication blockMesh -region air
-mv log.blockMesh log.blockMesh.air
-runApplication blockMesh -region porous
-mv log.blockMesh log.blockMesh.porous
+runApplication -s air    blockMesh -region air
+runApplication -s porous blockMesh -region porous
 
 # create rotor blades in air region
-runApplication topoSet -region air -dict system/topoSetDict.1
-mv log.topoSet log.topoSet.air.1
+runApplication -s air.1 \
+    topoSet -region air -dict system/topoSetDict.1
 
 runApplication createBaffles -region air -overwrite
 
 # create rotor zone in air region for MRF
-runApplication topoSet -region air -dict system/topoSetDict.2
-mv log.topoSet log.topoSet.air.2
+runApplication -s air.2 \
+    topoSet -region air -dict system/topoSetDict.2
 
 rm -rf constant/air/polyMesh/sets
 

tutorials/heatTransfer/chtMultiRegionSimpleFoam/multiRegionHeaterRadiation/Allrun

@@ -15,13 +15,15 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Agglomerate patch faces
 for i in bottomAir topAir
 do
-    faceAgglomerate -region $i -dict constant/viewFactorsDict > log.faceAgglomerate.$i 2>&1
+    runApplication -s $i \
+        faceAgglomerate -region $i -dict constant/viewFactorsDict
 done
 
 # Generate view factors
 for i in bottomAir topAir
 do
-    viewFactorsGen -region $i > log.viewFactorsGen.$i 2>&1
+    runApplication -s $i \
+        viewFactorsGen -region $i
 done
 
 runApplication `getApplication`

tutorials/heatTransfer/chtMultiRegionSimpleFoam/multiRegionHeaterRadiation/Allrun-parallel

@@ -18,13 +18,15 @@ runApplication decomposePar -allRegions
 # Agglomerate patch faces
 for i in bottomAir topAir
 do
-    mpirun -np 4 faceAgglomerate -region $i -dict constant/viewFactorsDict -parallel>   log.faceAgglomerate.$i 2>&1
+    runParallel -s $i -np 4 \
+        faceAgglomerate -region $i -dict constant/viewFactorsDict
 done
 
 # Generate view factors
 for i in bottomAir topAir
 do
-    mpirun -np 4 viewFactorsGen -region $i -parallel > log.viewFactorsGen.$i 2>&1
+    runParallel -s $i -np 4 \
+        viewFactorsGen -region $i
 done
 
 # Run

tutorials/heatTransfer/chtMultiRegionSimpleFoam/multiRegionHeaterRadiation/Allrun.pre

@@ -17,7 +17,7 @@ done
 
 for i in bottomAir topAir heater leftSolid rightSolid
 do
-    changeDictionary -region $i > log.changeDictionary.$i 2>&1
+    runApplication -s $i  changeDictionary -region $i
 done
 
 

tutorials/incompressible/boundaryFoam/boundaryWallFunctionsProfile/Allrun

@@ -17,15 +17,11 @@ do
     sed "s/XXX/$e/g" constant/transportProperties.template \
         > constant/transportProperties
 
-    runApplication `getApplication`
-
-    mv log.boundaryFoam log.boundaryFoam_$e
+    runApplication -s $e  `getApplication`
 
     # extract y+, U+
     # note: both must be added to foamLog.db
-    runApplication foamLog log.boundaryFoam_$e
-
-    mv log.foamLog log.foamLog_$e
+    runApplication -s $e  foamLog log.boundaryFoam.$e
 
     if [ -e logs/yPlus_0 ]
     then

tutorials/incompressible/porousSimpleFoam/straightDuctImplicit/Allrun.pre

@@ -9,13 +9,14 @@ runApplication surfaceFeatureExtract
 runApplication foamyHexMesh
 
 # Collapse only patch faces from incomplete conformation
-cp system/collapseDict.indirectPatchFaces system/collapseDict
-runApplication collapseEdges -collapseFaceSet indirectPatchFaces -latestTime -overwrite
-mv log.collapseEdges log.collapseEdges-indirectPatchFaces
+runApplication -s indirectPatchFaces \
+    collapseEdges -collapseFaceSet indirectPatchFaces -latestTime -overwrite \
+                  -dict system/collapseDict.indirectPatchFaces
 
 # Collapse small edges and sliver faces
-cp system/collapseDict.collapseFaces system/collapseDict
-runApplication collapseEdges -collapseFaces -latestTime -overwrite
+runApplication -s collapseFaces \
+    collapseEdges -collapseFaces -latestTime -overwrite \
+                  -dict system/collapseDict.collapseFaces
 
 runApplication checkMesh -allTopology -allGeometry -latestTime
 

tutorials/lagrangian/reactingParcelFilmFoam/cylinder/Allrun.pre

@@ -5,7 +5,6 @@ cp -rf 0.org 0
 runApplication blockMesh
 
 #runApplication setSet -batch wallFilmRegion.setSet
-#mv log.setSet log.wallFilmRegion.setSet
 runApplication topoSet
 
 runApplication extrudeToRegionMesh -overwrite

tutorials/lagrangian/reactingParcelFilmFoam/hotBoxes/Allrun-parallel

@@ -8,15 +8,11 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 application=`getApplication`
 
-runApplication decomposePar -region wallFilmRegion
-mv log.decomposePar log.decomposePar.wallFilmRegion
-runApplication decomposePar
-mv log.decomposePar log.decomposePar.primaryRegion
+runApplication -s wallFilmRegion decomposePar -region wallFilmRegion
+runApplication -s primaryRegion  decomposePar
 
 runParallel $application
 
-runApplication reconstructPar -region wallFilmRegion
-mv log.reconstructPar log.reconstructPar.wallFilmRegion
-runApplication reconstructPar
-mv log.reconstructPar log.reconstructPar.primaryRegion
+runApplication -s wallFilmRegion reconstructPar -region wallFilmRegion
+runApplication -s primaryRegion  reconstructPar
 

tutorials/lagrangian/reactingParcelFilmFoam/hotBoxes/Allrun.pre

@@ -16,8 +16,7 @@ runApplication topoSet
 runApplication subsetMesh c0 -patch wallFilm -overwrite
 
 # split the obstacle patches into cube[1-6]_patch[1-6]
-echo "running patchifyObstacles"
-./patchifyObstacles > log.patchifyObstacles 2>&1
+runApplication ./patchifyObstacles
 
 # Create the wall film region via extrusion
 runApplication extrudeToRegionMesh -overwrite

tutorials/lagrangian/reactingParcelFilmFoam/rivuletPanel/Allrun.pre

@@ -6,7 +6,6 @@ cp -rf 0.org 0
 runApplication blockMesh
 
 #runApplication setSet -batch wallFilmRegion.setSet
-#mv log.setSet log.wallFilmRegion.setSet
 runApplication topoSet -dict system/wallFilmRegion.topoSet
 
 runApplication extrudeToRegionMesh -overwrite

tutorials/lagrangian/reactingParcelFilmFoam/splashPanel/Allrun.pre

@@ -5,17 +5,25 @@ cp -rf 0.org 0
 
 runApplication blockMesh
 
-#runApplication setSet -batch wallFilmRegion.setSet
-#mv log.setSet log.wallFilmRegion.setSet
-runApplication topoSet -dict system/wallFilmRegion.topoSet
-mv log.topoSet log.wallFilmRegion.topoSet
+#If using batch mode
+#runApplication -s wallFilmRegion \
+#    setSet -batch wallFilmRegion.setSet
+
+#If using dictionary mode
+runApplication -s wallFilmRegion \
+    topoSet -dict system/wallFilmRegion.topoSet
 
 runApplication extrudeToRegionMesh -overwrite
 
-#runApplication setSet -region wallFilmRegion -batch createWallFilmRegionPatches.setSet
-#mv log.setSet log.createWallFilmRegionPatches.setSet
-runApplication topoSet -region wallFilmRegion -dict system/createWallFilmRegionPatches.topoSet
-mv log.topoSet log.createWallFilmRegionPatches.topoSet
+#If using batch mode
+#runApplication -s createWallFilmRegionPatches \
+#    setSet -region wallFilmRegion \
+#           -batch createWallFilmRegionPatches.setSet
+
+#If using dictionary mode
+runApplication -s createWallFilmRegionPatches \
+    topoSet -region wallFilmRegion \
+            -dict system/createWallFilmRegionPatches.topoSet
 
 runApplication createPatch -region wallFilmRegion -overwrite
 

tutorials/mesh/foamyHexMesh/blob/Allrun

@@ -9,11 +9,11 @@ cp $FOAM_TUTORIALS/resources/geometry/blob.stl.gz constant/triSurface/
 
 runApplication foamyHexMesh
 
-runApplication collapseEdges -latestTime -collapseFaces
-mv log.collapseEdges log.collapseFaces
+runApplication -s collapseFaces \
+    collapseEdges -latestTime -collapseFaces
 
-runApplication collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
-mv log.collapseEdges log.collapseFaceSet
+runApplication -s collapseFaceSet \
+    collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
 
 runApplication checkMesh -latestTime -allGeometry -allTopology
 

tutorials/mesh/foamyHexMesh/blob/Allrun-parallel

@@ -12,11 +12,11 @@ runApplication decomposePar -region backgroundMeshDecomposition
 
 runParallel foamyHexMesh
 
-runParallel collapseEdges -latestTime -collapseFaces
-mv log.collapseEdges log.collapseFaces
+runParallel -s collapseFaces \
+    collapseEdges -latestTime -collapseFaces
 
-runParallel collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
-mv log.collapseEdges log.collapseFaceSet
+runParallel -s collapseFaceSet \
+    collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
 
 runParallel checkMesh -latestTime -allTopology -allGeometry
 

tutorials/mesh/foamyHexMesh/flange/Allrun

@@ -9,11 +9,11 @@ cp $FOAM_TUTORIALS/resources/geometry/flange.stl.gz constant/triSurface/
 
 runApplication foamyHexMesh
 
-runApplication collapseEdges -latestTime -collapseFaces
-mv log.collapseEdges log.collapseFaces
+runApplication -s collapseFaces \
+    collapseEdges -latestTime -collapseFaces
 
-runApplication collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
-mv log.collapseEdges log.collapseFaceSet
+runApplication -s collapseFaceSet \
+    collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
 
 runApplication checkMesh -latestTime -allGeometry -allTopology
 

tutorials/mesh/foamyHexMesh/flange/Allrun-parallel

@@ -13,11 +13,11 @@ runApplication decomposePar -region backgroundMeshDecomposition
 
 runParallel foamyHexMesh
 
-runParallel collapseEdges -latestTime -collapseFaces
-mv log.collapseEdges log.collapseFaces
+runParallel -s collapseFaces \
+    collapseEdges -latestTime -collapseFaces
 
-runParallel collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
-mv log.collapseEdges log.collapseFaceSet
+runParallel -s collapseFaceSet \
+    collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
 
 runParallel checkMesh -latestTime -allTopology -allGeometry
 

tutorials/mesh/foamyHexMesh/mixerVessel/Allrun-pre

@@ -6,19 +6,14 @@ cd ${0%/*} || exit 1    # Run from this directory
 
 intersectSurfaces()
 {
-    runApplication              \
-        surfaceBooleanFeatures  \
-        intersection            \
-        "$@"
-
     outputName1=$(basename $1)
     outputName1=${outputName1%.*}
 
     outputName2=$(basename $2)
     outputName2=${outputName2%.*}
 
-    mv log.surfaceBooleanFeatures \
-       log.surfaceBooleanFeatures.$outputName1:$outputName2
+    runApplication -s $outputName1:$outputName2 \
+        surfaceBooleanFeatures intersection "$@"
 }
 
 # Set application name
@@ -77,30 +72,33 @@ done
 
 # Meshing
 \cp system/controlDict.mesh system/controlDict
-\cp system/collapseDict.collapseFaces system/collapseDict
 
 runApplication blockMesh -region backgroundMeshDecomposition
 
-runApplication decomposePar -region backgroundMeshDecomposition
+runApplication -s backgroundMeshDecomposition \
+    decomposePar -region backgroundMeshDecomposition
 
 runApplication surfaceFeatureExtract
 
 runParallel foamyHexMesh
 
-runParallel collapseEdges -collapseFaces -latestTime
-mv log.collapseEdges log.collapseFaces
+runParallel -s faces \
+    collapseEdges -collapseFaces -latestTime \
+                  -dict system/collapseDict.collapseFaces
 
-#\cp system/collapseDict.indirectPatchFaces system/collapseDict
-#runParallel collapseEdges -collapseFaceSet indirectPatchFaces -latestTime
-#mv log.collapseEdges log.collapseFaceSet
+#runParallel -s faceSet  \
+#    collapseEdges -collapseFaceSet indirectPatchFaces -latestTime \
+#                  -dict system/collapseDict.indirectPatchFaces
 
 runParallel checkMesh -allTopology -allGeometry -latestTime
 
 runApplication reconstructParMesh -latestTime
 
-# Copy the mesh into polyMesh and delete the 102 directory
-\cp -r 101/polyMesh constant
-\rm -rf 101
+# Copy the mesh from the latest time folder into polyMesh and delete that
+# latest time folder
+latestTime=$(foamListTimes -latestTime)
+\cp -r $latestTime/polyMesh constant
+\rm -rf $latestTime
 
 
 #------------------------------------------------------------------------------

tutorials/mesh/foamyHexMesh/mixerVessel/Allrun-simulation

@@ -24,8 +24,8 @@ runApplication createPatch -overwrite
 runApplication setFields
 
 # Decompose
-\rm log.decomposePar
-runApplication decomposePar -force
+runApplication -s main \
+    decomposePar -force
 
 # Run
 runParallel $application

tutorials/mesh/foamyHexMesh/mixerVessel/system/collapseDict

@@ -1,85 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  dev                                   |
-|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version         2.0;
-    format          ascii;
-    class           dictionary;
-    object          collapseDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-// If on, after collapsing check the quality of the mesh. If bad faces are
-// generated then redo the collapsing with stricter filtering.
-controlMeshQuality      on;
-
-collapseEdgesCoeffs
-{
-    // Edges shorter than this absolute value will be merged
-    minimumEdgeLength   1e-6;
-
-    // The maximum angle between two edges that share a point attached to
-    // no other edges
-    maximumMergeAngle   180;
-}
-
-
-collapseFacesCoeffs
-{
-    // The initial face length factor
-    initialFaceLengthFactor                 1;
-
-    // If the face can't be collapsed to an edge, and it has a span less than
-    // the target face length multiplied by this coefficient, collapse it
-    // to a point.
-    maxCollapseFaceToPointSideLengthCoeff   0.3;
-
-    // Allow early collapse of edges to a point
-    allowEarlyCollapseToPoint               on;
-
-    // Fraction to premultiply maxCollapseFaceToPointSideLengthCoeff by if
-    // allowEarlyCollapseToPoint is enabled
-    allowEarlyCollapseCoeff                 0.2;
-
-    // Defining how close to the midpoint (M) of the projected
-    // vertices line a projected vertex (X) can be before making this
-    // an invalid edge collapse
-    //
-    // X---X-g----------------M----X-----------g----X--X
-    //
-    // Only allow a collapse if all projected vertices are outwith
-    // guardFraction (g) of the distance form the face centre to the
-    // furthest vertex in the considered direction
-    guardFraction                           0.1;
-}
-
-
-controlMeshQualityCoeffs
-{
-    // Name of the dictionary that has the mesh quality coefficients used
-    // by motionSmoother::checkMesh
-    #include                    "meshQualityDict";
-
-    // The amount that minimumEdgeLength will be reduced by for each
-    // edge if that edge's collapse generates a poor quality face
-    edgeReductionFactor         0.5;
-
-    // The amount that initialFaceLengthFactor will be reduced by for each
-    // face if its collapse generates a poor quality face
-    faceReductionFactor         0.5;
-
-    // Maximum number of outer iterations is mesh quality checking is enabled
-    maximumIterations           10;
-
-    maximumSmoothingIterations  1;
-
-    maxPointErrorCount          3;
-}
-
-
-// ************************************************************************* //

tutorials/mesh/foamyHexMesh/mixerVessel/system/collapseDict

@@ -0,0 +1 @@
+collapseDict.collapseFaces

tutorials/mesh/foamyHexMesh/simpleShapes/Allrun

@@ -4,28 +4,28 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Source tutorial run functions
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
-runApplication surfaceOrient \
-    constant/triSurface/cone.stl \
-    -inside '(0 -0.5 0)' \
-    constant/triSurface/cone_orient.stl
-mv log.surfaceOrient log.surfaceOrient.cone
+runApplication -s cone \
+    surfaceOrient constant/triSurface/cone.stl \
+                  -inside '(0 -0.5 0)' \
+                  constant/triSurface/cone_orient.stl
 
-runApplication surfaceOrient \
-    constant/triSurface/sphere.stl \
-    -inside '(0 -0.5 0)' \
-    constant/triSurface/sphere_orient.stl
-mv log.surfaceOrient log.surfaceOrient.sphere
+runApplication -s sphere \
+    surfaceOrient constant/triSurface/sphere.stl \
+                  -inside '(0 -0.5 0)' \
+                  constant/triSurface/sphere_orient.stl
 
-runApplication surfaceBooleanFeatures intersection \
-                       constant/triSurface/cone_orient.stl \
-                       constant/triSurface/sphere_orient.stl
+runApplication \
+    surfaceBooleanFeatures intersection \
+                           constant/triSurface/cone_orient.stl \
+                           constant/triSurface/sphere_orient.stl
 
 runApplication foamyHexMesh
 
-runApplication collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
-mv log.collapseEdges log.collapseFaceSet
+runApplication -s collapseFaceSet \
+    collapseEdges -latestTime -collapseFaceSet indirectPatchFaces
 
-runApplication collapseEdges -latestTime -collapseFaces
+runApplication -s collapseFaces \
+    collapseEdges -latestTime -collapseFaces
 
 
 #------------------------------------------------------------------------------

tutorials/mesh/refineMesh/refineFieldDirs/Allrun

@@ -17,16 +17,15 @@ mkdir 0
 # Refine over Z, in 6 passes
 for index in 1 2 3 4 5 6; do
 
-  runApplication calcRadiusField
-  mv log.calcRadiusField log.calcRadiusField.tier$index
+  runApplication -s tier$index  calcRadiusField
 
-  runApplication topoSet -dict system/topoSetDict.tier$index
-  mv log.topoSet log.topoSet.tier$index
+  runApplication -s tier$index \
+      topoSet -dict system/topoSetDict.tier$index
 
   ## foamToVTK -cellSet tier$index
 
-  runApplication refineMesh -dict system/refineMeshDict.tier$index -overwrite
-  mv log.refineMesh log.refineMesh.tier$index
+  runApplication -s tier$index \
+      refineMesh -dict system/refineMeshDict.tier$index -overwrite
 
   rm -r 0/*
 
@@ -35,17 +34,15 @@ done
 # Refine over cylindrical coordinates, in 3 passes
 for index in 1 2 3; do
 
-  runApplication calcRadiusField -calcDirections
-  mv log.calcRadiusField log.calcRadiusField.range$index
+  runApplication -s range$index  calcRadiusField -calcDirections
 
-  runApplication topoSet -dict system/topoSetDict.range$index
-  mv log.topoSet log.topoSet.range$index
+  runApplication -s range$index \
+      topoSet -dict system/topoSetDict.range$index
 
   ## foamToVTK -cellSet tier$index
 
-  runApplication refineMesh -dict system/refineMeshDict.range$index \
-      -overwrite
-  mv log.refineMesh log.refineMesh.range$index
+  runApplication -s range$index \
+      refineMesh -dict system/refineMeshDict.range$index -overwrite
 
   rm -r 0/*
 

tutorials/multiphase/interDyMFoam/ras/DTCHull/Allrun

@@ -4,12 +4,6 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Source tutorial run functions
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
-runRefineMesh ()
-{
-    echo "Running refineMesh on $PWD"
-    refineMesh -dict system/refineMeshDict -overwrite > log.refineMesh 2>&1
-}
-
 # copy DTC hull surface from resources folder
 cp $FOAM_TUTORIALS/resources/geometry/DTC-scaled.stl.gz constant/triSurface/
 
@@ -17,17 +11,13 @@ runApplication surfaceFeatureExtract
 
 runApplication blockMesh
 
-i=1
-if [ -f log.topoSet.6 ] ; then
-   i=7
-fi
-while [ "$i" -lt 7 ] ; do
-    cp system/topoSetDict.${i} system/topoSetDict
-    runApplication topoSet
-    runRefineMesh
-    mv log.topoSet log.topoSet.$i
-    mv log.refineMesh log.refineMesh.$i
-    i=$(expr $i + 1)
+for i in 1 2 3 4 5 6
+do
+    runApplication -s $i \
+        topoSet -dict system/topoSetDict.${i}
+
+    runApplication -s $i \
+        refineMesh -dict system/refineMeshDict -overwrite
 done
 
 runApplication snappyHexMesh -overwrite

tutorials/multiphase/interFoam/les/nozzleFlow2D/Allrun

@@ -7,28 +7,15 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Get application name
 application=`getApplication`
 
-runRefineMesh ()
-{
-    echo "Running refineMesh on $PWD"
-    refineMesh -dict system/refineMeshDict > log.refineMesh 2>&1
-}
-
 runApplication blockMesh
 
-i=1
-if [ -f log.topoSet ] ; then
-   i=3
-fi
-while [ "$i" -lt 3 ] ; do
-    if [ -f log.topoSet ] ; then
-        mv log.topoSet log.topoSet.1
-    fi
-    cp system/topoSetDict.${i} system/topoSetDict
-    runApplication topoSet
-    runRefineMesh
-    cp -r 1e-08/polyMesh/* constant/polyMesh
-    rm -rf 1e-08
-    i=`expr $i + 1`
+for i in 1 2
+do
+    runApplication -s $i \
+        topoSet -dict system/topoSetDict.${i}
+
+    runApplication -s $i \
+        refineMesh -dict system/refineMeshDict -overwrite
 done
 
 runApplication $application

tutorials/multiphase/interFoam/ras/DTCHull/Allrun

@@ -4,12 +4,6 @@ cd ${0%/*} || exit 1    # Run from this directory
 # Source tutorial run functions
 . $WM_PROJECT_DIR/bin/tools/RunFunctions
 
-runRefineMesh ()
-{
-    echo "Running refineMesh on $PWD"
-    refineMesh -dict system/refineMeshDict -overwrite > log.refineMesh 2>&1
-}
-
 # copy DTC hull surface from resources folder
 cp $FOAM_TUTORIALS/resources/geometry/DTC-scaled.stl.gz constant/triSurface/
 
@@ -17,17 +11,13 @@ runApplication surfaceFeatureExtract
 
 runApplication blockMesh
 
-i=1
-if [ -f log.topoSet.6 ] ; then
-   i=7
-fi
-while [ "$i" -lt 7 ] ; do
-    cp system/topoSetDict.${i} system/topoSetDict
-    runApplication topoSet
-    runRefineMesh
-    mv log.topoSet log.topoSet.$i
-    mv log.refineMesh log.refineMesh.$i
-    i=$(expr $i + 1)
+for i in 1 2 3 4 5 6
+do
+    runApplication -s $i \
+        topoSet -dict system/topoSetDict.${i}
+
+    runApplication -s $i \
+        refineMesh -dict system/refineMeshDict -overwrite
 done
 
 runApplication snappyHexMesh -overwrite

tutorials/multiphase/interPhaseChangeDyMFoam/propeller/Allrun.pre

@@ -25,9 +25,7 @@ runApplication renumberMesh -overwrite
 # - generate face/cell sets and zones
 
 #runApplication setSet -batch createInletOutletSets.setSet
-#mv log.setSet log.createInletOutletSets.setSet
 runApplication topoSet -dict system/createInletOutletSets.topoSetDict
-#mv log.topoSet log.createInletOutletSets.topoSet
 
 
 # - create the inlet/outlet and AMI patches
@@ -35,7 +33,7 @@ runApplication topoSet -dict system/createInletOutletSets.topoSetDict
 runApplication createPatch -overwrite
 
 
-# - test by running moveDynamicMes
+# - test by running moveDynamicMesh
 #runApplication moveDynamicMesh -checkAMI
 
 

tutorials/multiphase/potentialFreeSurfaceDyMFoam/oscillatingBox/Allrun

@@ -8,10 +8,14 @@ cd ${0%/*} || exit 1    # Run from this directory
 application=`getApplication`
 
 runApplication blockMesh
-runApplication topoSet
-mv log.topoSet log.topoSet.1
+
+runApplication -s 1  topoSet
+
 runApplication subsetMesh -overwrite c0 -patch floatingObject
-runApplication topoSet -dict system/topoSetDict-selectBottom
+
+runApplication -s selectBottom \
+    topoSet -dict system/topoSetDict-selectBottom
+
 runApplication createPatch -overwrite
 
 cp -r 0.org 0 > /dev/null 2>&1