zhyang-dev/openfoam
1
0
Fork 0
mirror of https://develop.openfoam.com/Development/openfoam.git synced 2025-11-28 03:28:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

ENH: Updated comment/description

Browse Source
This commit is contained in:
andy
2012-11-19 09:37:41 +00:00
parent d460b3484b
commit 7888a0d8bb
13 changed files with 176 additions and 181 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
applications/utilities/mesh/generation/snappyHexMesh/snappyHexMeshDict
View File

@ -337,7 +337,7 @@ addLayersControls
// Advanced settings
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// are perpendicular
featureAngle 60;
// At non-patched sides allow mesh to slip if extrusion direction makes

15
tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges/system/snappyHexMeshDict
View File

@ -256,21 +256,20 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.5;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
// See relativeSizes parameter.
minThickness 0.25;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -279,11 +278,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 5;

15
tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/snappyHexMeshDict
View File

@ -285,18 +285,17 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.3;
//- Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
finalLayerThickness 1;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.1;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -304,11 +303,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 30;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

12
tutorials/incompressible/pimpleDyMFoam/propeller/system/snappyHexMeshDict
View File

@ -335,7 +335,7 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
@ -343,12 +343,12 @@ addLayersControls
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.1;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -356,11 +356,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 30;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

15
tutorials/incompressible/pimpleDyMFoam/wingMotion/wingMotion_snappyHexMesh/system/snappyHexMeshDict
View File

@ -189,21 +189,20 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.3;
//- Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.7;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
// See relativeSizes parameter.
minThickness 0.25;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -211,11 +210,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 5;

12
tutorials/incompressible/pisoFoam/les/motorBike/motorBike/system/snappyHexMeshDict
View File

@ -204,17 +204,17 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.1;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
nGrow 0;
@ -222,11 +222,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

14
tutorials/incompressible/simpleFoam/motorBike/system/snappyHexMeshDict
View File

@ -227,7 +227,7 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
@ -235,12 +235,12 @@ addLayersControls
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.1;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -248,15 +248,15 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- At non-patched sides allow mesh to slip if extrusion direction makes
// At non-patched sides allow mesh to slip if extrusion direction makes
// angle larger than slipFeatureAngle.
slipFeatureAngle 30;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

12
tutorials/incompressible/simpleFoam/turbineSiting/system/snappyHexMeshDict
View File

@ -277,17 +277,17 @@ addLayersControls
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// See relativeSizes parameter.
minThickness 0.25;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -296,11 +296,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 5;

15
tutorials/mesh/cvMesh/blob/system/snappyHexMeshDict
View File

@ -216,20 +216,19 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.5;
//- Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.02;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.005;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -237,11 +236,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 90;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

15
tutorials/mesh/cvMesh/flange/system/snappyHexMeshDict
View File

@ -216,20 +216,19 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.5;
//- Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.0003;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.0001;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -237,11 +236,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 90;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;

12
tutorials/mesh/snappyHexMesh/flange/system/snappyHexMeshDict
View File

@ -214,17 +214,17 @@ addLayersControls
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// See relativeSizes parameter.
minThickness 0.25;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
nGrow 0;
@ -232,11 +232,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 30;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 5;

12
tutorials/multiphase/LTSInterFoam/wigleyHull/system/snappyHexMeshDict
View File

@ -228,17 +228,17 @@ addLayersControls
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the thickness of the layer furthest away from the wall.
// See relativeSizes parameter.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// See relativeSizes parameter.
minThickness 0.25;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -247,11 +247,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 60;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 5;

12
tutorials/multiphase/interPhaseChangeFoam/cavitatingBullet/system/snappyHexMeshDict
View File

@ -210,18 +210,18 @@ addLayersControls
// Expansion factor for layer mesh
expansionRatio 1.0;
//- Wanted thickness of final added cell layer. If multiple layers
// Wanted thickness of final added cell layer. If multiple layers
// is the
// thickness of the layer furthest away from the wall.
// Relative to undistorted size of cell outside layer.
finalLayerThickness 0.3;
//- Minimum thickness of cell layer. If for any reason layer
// Minimum thickness of cell layer. If for any reason layer
// cannot be above minThickness do not add layer.
// Relative to undistorted size of cell outside layer.
minThickness 0.1;
//- If points get not extruded do nGrow layers of connected faces that are
// If points get not extruded do nGrow layers of connected faces that are
// also not grown. This helps convergence of the layer addition process
// close to features.
// Note: changed(corrected) w.r.t 17x! (didn't do anything in 17x)
@ -230,11 +230,11 @@ addLayersControls
// Advanced settings
//- When not to extrude surface. 0 is flat surface, 90 is when two faces
// make straight angle.
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 30;
//- Maximum number of snapping relaxation iterations. Should stop
// Maximum number of snapping relaxation iterations. Should stop
// before upon reaching a correct mesh.
nRelaxIter 3;