TUT: snappyMultiRegionHeater with redistributePar

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/Allclean

@@ -2,16 +2,10 @@
 cd ${0%/*} || exit 1                        # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/CleanFunctions  # Tutorial clean functions
 
-cleanCase
+cleanCase0
 
 rm -rf VTK
 rm -rf constant/cellToRegion
-rm -f 0/cellToRegion
-rm -rf 0/bottomWater
-rm -rf 0/topAir
-rm -rf 0/heater
-rm -rf 0/leftSolid
-rm -rf 0/rightSolid
 
 rm -rf constant/bottomWater/polyMesh
 rm -rf constant/topAir/polyMesh

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/Allmesh

@@ -4,23 +4,25 @@ cd ${0%/*} || exit 1                        # Run from this directory
 
 runApplication blockMesh
 runApplication topoSet
+
+# Restore initial fields
+restore0Dir
+
 runApplication splitMeshRegions -cellZones -overwrite
 
 # Remove fluid fields from solid regions (important for post-processing)
-for i in $(foamListRegions solid)
+for region in $(foamListRegions solid)
 do
-   rm -f 0*/$i/{nut,alphat,epsilon,k,U,p_rgh}
+    rm -f 0/$region/{nut,alphat,epsilon,k,U,p_rgh}
 done
 
-for i in $(foamListRegions)
+for region in $(foamListRegions)
 do
-   runApplication -s $i changeDictionary -region $i
+    runApplication -s $region changeDictionary -region $region
 done
 
-
 echo
-echo "Creating files for paraview post-processing"
+echo "Use paraFoam -touch-all to create files for paraview post-processing"
 echo
-paraFoam -touchAll
 
 #------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/system/decomposeParDict

@@ -30,12 +30,11 @@ regions
     heater
     {
         numberOfSubdomains  1;
-        method          none;
+        method          simple; // none;
 
         coeffs
         {
             n       (1 1 1);
-            delta   0.001;
         }
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/T

@@ -20,10 +20,12 @@ internalField   uniform 300;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 300;
+        value   $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/U

@@ -20,10 +20,12 @@ internalField   uniform (0.01 0 0);
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform (0.01 0 0);
+        value   $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/alphat

@@ -20,12 +20,13 @@ internalField   uniform 0;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 0;
+        value   $internalField;
     }
 }
 
-
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/epsilon

@@ -20,12 +20,13 @@ internalField   uniform 0.01;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 0.01;
+        value   $internalField;
     }
 }
 
-
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/k

@@ -20,12 +20,13 @@ internalField   uniform 0.1;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 0.1;
+        value   $internalField;
     }
 }
 
-
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/p

@@ -20,10 +20,12 @@ internalField   uniform 1e5;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 1e5;
+        value   $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/p_rgh

@@ -20,10 +20,12 @@ internalField   uniform 1e5;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type            calculated;
-        value           uniform 1e5;
+        value           $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/0.orig/rho

@@ -20,10 +20,12 @@ internalField   uniform 8000;
 
 boundaryField
 {
+    #includeEtc "caseDicts/setConstraintTypes"
+
     ".*"
     {
         type    calculated;
-        value           uniform 8000;
+        value   $internalField;
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allclean

@@ -2,19 +2,13 @@
 cd ${0%/*} || exit 1                        # Run from this directory
 . $WM_PROJECT_DIR/bin/tools/CleanFunctions  # Tutorial clean functions
 
-cleanCase
+cleanCase0
 
 rm -rf constant/extendedFeatureEdgeMesh > /dev/null 2>&1
 rm -f constant/triSurface/*.eMesh > /dev/null 2>&1
 
 rm -rf VTK
 rm -rf constant/cellToRegion
-rm -rf 0/bottomAir
-rm -rf 0/topAir
-rm -rf 0/heater
-rm -rf 0/leftSolid
-rm -rf 0/rightSolid
-rm -f 0/cellToRegion
 
 rm -rf constant/bottomAir/polyMesh
 rm -rf constant/topAir/polyMesh

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun

@@ -1,45 +0,0 @@
-#!/bin/sh
-cd ${0%/*} || exit 1                        # Run from this directory
-. $WM_PROJECT_DIR/bin/tools/RunFunctions    # Tutorial run functions
-
-rm -rf constant/polyMesh/sets
-
-runApplication blockMesh
-runApplication surfaceFeatureExtract
-
-runApplication snappyHexMesh -overwrite
-runApplication splitMeshRegions -cellZones -overwrite
-
-# remove fluid fields from solid regions (important for post-processing)
-for i in $(foamListRegions solid)
-do
-   rm -f 0*/$i/{nut,alphat,epsilon,k,U,p_rgh}
-done
-
-
-for i in $(foamListRegions)
-do
-   runApplication -s $i changeDictionary -region $i
-done
-
-
-#-- Run on single processor
-runApplication $(getApplication)
-
-
-## Decompose
-#runApplication decomposePar -allRegions
-#
-## Run
-#runParallel $(getApplication)
-#
-## Reconstruct
-#runApplication reconstructPar -allRegions
-
-
-echo
-echo "creating files for paraview post-processing"
-echo
-paraFoam -touchAll
-
-#------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun

@@ -0,0 +1 @@
+Allrun-parallel

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun-parallel

@@ -0,0 +1,55 @@
+#!/bin/sh
+cd ${0%/*} || exit 1                        # Run from this directory
+. $WM_PROJECT_DIR/bin/tools/RunFunctions    # Tutorial run functions
+
+rm -rf constant/polyMesh/sets
+
+# For meshing only
+decompDict="-decomposeParDict system/decomposeParDict.6"
+
+runApplication blockMesh
+runApplication surfaceFeatureExtract
+
+runApplication $decompDict decomposePar
+
+runParallel $decompDict snappyHexMesh -overwrite
+
+# Restore initial fields
+restore0Dir -processor
+
+runParallel $decompDict splitMeshRegions -cellZones -overwrite
+
+# Remove fluid fields from solid regions (important for post-processing)
+for region in $(foamListRegions solid)
+do
+    rm -f 0/$region/{nut,alphat,epsilon,k,U,p_rgh}
+    rm -f processor*/0/$region/{nut,alphat,epsilon,k,U,p_rgh}
+done
+
+for region in $(foamListRegions)
+do
+    runParallel $decompDict -s $region changeDictionary -region $region
+done
+
+# Redistribute onto fewer processors, with special treatment for heater
+for region in $(foamListRegions)
+do
+    runParallel -np 6 -s redist-$region \
+        redistributePar -overwrite -region $region
+done
+
+#-- Run in parallel
+runParallel $(getApplication)
+
+# Reconstruct
+for region in $(foamListRegions)
+do
+    runParallel -s reconstruct-$region \
+        redistributePar -reconstruct -region $region
+done
+
+echo
+echo "Use paraFoam -touch-all to create files for paraview post-processing"
+echo
+
+#------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun-serial

@@ -0,0 +1,36 @@
+#!/bin/sh
+cd ${0%/*} || exit 1                        # Run from this directory
+. $WM_PROJECT_DIR/bin/tools/RunFunctions    # Tutorial run functions
+
+rm -rf constant/polyMesh/sets
+
+runApplication blockMesh
+runApplication surfaceFeatureExtract
+
+runApplication snappyHexMesh -overwrite
+
+# Restore initial fields
+restore0Dir
+
+runApplication splitMeshRegions -cellZones -overwrite
+
+# Remove fluid fields from solid regions (important for post-processing)
+for region in $(foamListRegions solid)
+do
+    rm -f 0/$region/{nut,alphat,epsilon,k,U,p_rgh}
+done
+
+for region in $(foamListRegions)
+do
+    runApplication -s $region changeDictionary -region $region
+done
+
+
+# Run on single processor
+runApplication $(getApplication)
+
+echo
+echo "Use paraFoam -touch-all to create files for paraview post-processing"
+echo
+
+#------------------------------------------------------------------------------

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/changeDictionaryDict

@@ -37,6 +37,10 @@ U
             type            fixedValue;
             value           uniform (0 0 0);
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
     }
 }
 
@@ -51,6 +55,11 @@ T
             type            zeroGradient;
         }
 
+        "procBoundary.*"
+        {
+            type            processor;
+        }
+
         "bottomAir_to_.*"
         {
             type            compressible::turbulentTemperatureCoupledBaffleMixed;
@@ -74,6 +83,10 @@ epsilon
             type            epsilonWallFunction;
             value           uniform 0.01;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
     }
 }
 
@@ -88,6 +101,10 @@ k
             type            kqRWallFunction;
             value           uniform 0.1;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
     }
 }
 
@@ -102,6 +119,10 @@ p_rgh
             type            fixedFluxPressure;
             value           uniform 1e5;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
     }
 }
 
@@ -116,6 +137,10 @@ p
             type            calculated;
             value           uniform 1e5;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
     }
 }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/decomposeParDict

@@ -1,48 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  plus                                  |
-|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      decomposeParDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-coeffs
-{
-    n           (2 2 1);
-    //delta       0.001; // default=0.001
-    //order       xyz;   // default=xzy
-    dataFile    "decompositionData";
-}
-
-scotchCoeffs
-{
-    //processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    //writeGraph  true;
-    //strategy "b";
-}
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/bottomAir/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/decomposeParDict

@@ -19,30 +19,25 @@ numberOfSubdomains  4;
 //- Keep owner and neighbour on same processor for faces in zones:
 // preserveFaceZones (heater solid1 solid3);
 
-// method          scotch;
-method          hierarchical;
-// method          simple;
-// method          manual;
+method          scotch;
+
+regions
+{
+    heater
+    {
+        numberOfSubdomains  1;
+        method          simple;
+
+        coeffs
+        {
+            n       (1 1 1);
+        }
+    }
+}
 
 coeffs
 {
     n       (2 2 1);
-    //delta       0.001; // default=0.001
-    //order       xyz;   // default=xzy
-    dataFile    "decompositionData";
-}
-
-scotchCoeffs
-{
-    //processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    //writeGraph  true;
-    //strategy "b";
 }
 
 // ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/changeDictionaryDict

@@ -41,6 +41,10 @@ T
             type            zeroGradient;
             value           uniform 300;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
         "heater_to_.*"
         {
             type            compressible::turbulentTemperatureCoupledBaffleMixed;

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/decomposeParDict

@@ -1,49 +0,0 @@
-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  plus                                  |
-|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      decomposeParDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-numberOfSubdomains  4;
-
-//- Keep owner and neighbour on same processor for faces in zones:
-// preserveFaceZones (heater solid1 solid3);
-
-method          scotch;
-// method          hierarchical;
-// method          simple;
-// method          manual;
-
-coeffs
-{
-    n           (2 2 1);
-    //delta       0.001; // default=0.001
-    //order       xyz;   // default=xzy
-    dataFile    "decompositionData";
-}
-
-scotchCoeffs
-{
-    //processorWeights
-    //(
-    //    1
-    //    1
-    //    1
-    //    1
-    //);
-    //writeGraph  true;
-    //strategy "b";
-}
-
-
-// ************************************************************************* //

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/decomposeParDict

@@ -0,0 +1 @@
+../decomposeParDict

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/changeDictionaryDict

@@ -37,6 +37,10 @@ T
             type            zeroGradient;
             value           uniform 300;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
         "leftSolid_to_.*"
         {
             type            compressible::turbulentTemperatureCoupledBaffleMixed;

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/changeDictionaryDict

@@ -37,6 +37,10 @@ T
             type            zeroGradient;
             value           uniform 300;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
         "rightSolid_to_.*"
         {
             type            compressible::turbulentTemperatureCoupledBaffleMixed;

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/topAir/changeDictionaryDict

@@ -25,6 +25,10 @@ U
             type            fixedValue;
             value           uniform (0 0 0);
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
         minX
         {
             type            fixedValue;
@@ -49,6 +53,10 @@ T
         {
             type            zeroGradient;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
 
         minX
         {
@@ -83,6 +91,10 @@ epsilon
             type            epsilonWallFunction;
             value           uniform 0.01;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
 
         minX
         {
@@ -109,6 +121,10 @@ k
             type            kqRWallFunction;
             value           uniform 0.1;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
 
         minX
         {
@@ -135,6 +151,10 @@ p_rgh
             type            fixedFluxPressure;
             value           uniform 1e5;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
 
         maxX
         {
@@ -155,6 +175,10 @@ p
             type            calculated;
             value           uniform 1e5;
         }
+        "procBoundary.*"
+        {
+            type            processor;
+        }
 
         maxX
         {