rhoPimpleFoam: Added "consistent" option to replace rhoPimplecFoam

e.g. in tutorials/compressible/rhoPimpleFoam/ras/angledDuctLTS

PIMPLE
{
    momentumPredictor   yes;
    transonic           no;
    nOuterCorrectors    50;
    nCorrectors         1;
    nNonOrthogonalCorrectors 0;
    consistent          yes;

    rhoMin          0.5;
    rhoMax          2.0;

    residualControl
    {
        "(U|k|epsilon)"
        {
            relTol          0;
            tolerance       0.0001;
        }
    }

    turbOnFinalIterOnly off;
}

relaxationFactors
{
    fields
    {
        "p.*"           0.9;
        "rho.*"         1;
    }
    equations
    {
        "U.*"           0.9;
        "h.*"           0.7;
        "(k|epsilon|omega).*" 0.8;
    }
}

tutorials/compressible/rhoPimpleFoam/ras/angledDuctLTS/constant/polyMesh/boundary

@@ -0,0 +1,62 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       polyBoundaryMesh;
+    location    "constant/polyMesh";
+    object      boundary;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+6
+(
+    front
+    {
+        type            wall;
+        inGroups        1(wall);
+        nFaces          700;
+        startFace       63400;
+    }
+    back
+    {
+        type            wall;
+        inGroups        1(wall);
+        nFaces          700;
+        startFace       64100;
+    }
+    walls
+    {
+        type            wall;
+        inGroups        1(wall);
+        nFaces          1400;
+        startFace       64800;
+    }
+    porosityWall
+    {
+        type            wall;
+        inGroups        1(wall);
+        nFaces          1600;
+        startFace       66200;
+    }
+    inlet
+    {
+        type            patch;
+        nFaces          400;
+        startFace       67800;
+    }
+    outlet
+    {
+        type            patch;
+        nFaces          400;
+        startFace       68200;
+    }
+)
+
+// ************************************************************************* //

tutorials/compressible/rhoPimpleFoam/ras/angledDuctLTS/system/blockMeshDict

@@ -0,0 +1,147 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       dictionary;
+    object      blockMeshDict;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+// block definition for a porosity with an angled inlet/outlet
+// the porosity is not aligned with the main axes
+//
+
+convertToMeters 0.001;
+
+vertices
+(
+    // inlet region
+    ( -150  0  -25 )  // pt 0 (in1b)
+    ( -150 35.35533906  -25 ) // pt 1 (in2b)
+    ( -150  0  25 )  // pt 2 (in1f)
+    ( -150 35.35533906  25 ) // pt 3 (in2f)
+
+    // join inlet->outlet
+    (  0 0  -25 )    // pt 4 (join1b)
+    ( -35.35533906   35.35533906  -25 ) // pt 5 (join2b)
+    (  0 0  25 )    // pt 6 (join1f)
+    ( -35.35533906   35.35533906  25 ) // pt 7 (join2f)
+
+    // porosity ends ->outlet
+    ( 70.71067812 70.71067812  -25 )  // pt 8 (poro1b)
+    ( 35.35533906 106.06601718  -25 )  // pt 9 (poro2b)
+    ( 70.71067812 70.71067812  25 )  // pt 10 (poro1f)
+    ( 35.35533906 106.06601718  25 )  // pt 11 (poro2f)
+
+    // outlet
+    ( 141.42135624 141.42135624 -25 ) // pt 12 (out1b)
+    ( 106.06601718 176.7766953 -25 ) // pt 13 (out2b)
+    ( 141.42135624 141.42135624 25 ) // pt 14 (out1f)
+    ( 106.06601718 176.7766953 25 ) // pt 15 (out2f)
+);
+
+blocks
+(
+    // inlet block
+    hex (0 4 5 1 2 6 7 3)
+    inlet ( 15 20 20 ) simpleGrading (1 1 1)
+
+    // porosity block
+    hex (4 8 9 5 6 10 11 7)
+    porosity ( 20 20 20 ) simpleGrading (1 1 1)
+
+    // outlet block
+    hex (8 12 13 9 10 14 15 11)
+    outlet ( 20 20 20 )  simpleGrading (1 1 1)
+);
+
+edges
+(
+);
+
+boundary
+(
+    // is there no way of defining all my 'defaultFaces' to be 'wall'?
+    front
+    {
+        type wall;
+        faces
+        (
+            // inlet block
+            (2 6 7 3)
+            // outlet block
+            (10 14 15 11)
+        );
+    }
+
+    back
+    {
+        type wall;
+        faces
+        (
+            // inlet block
+            (1 5 4 0)
+            // outlet block
+            (9 13 12 8)
+        );
+    }
+
+    walls
+    {
+        type wall;
+        faces
+        (
+            // inlet block
+            (2 0 4 6)
+            (7 5 1 3)
+            // outlet block
+            (10 8 12 14)
+            (15 13 9 11)
+        );
+    }
+
+    porosityWall
+    {
+        type wall;
+        faces
+        (
+            // porosity block
+            (6 10 11 7)
+            // porosity block
+            (5 9 8 4)
+            // porosity block
+            (6 4 8 10)
+            (11 9 5 7)
+        );
+    }
+
+    inlet
+    {
+        type patch;
+        faces
+        (
+            (3 1 0 2)
+        );
+    }
+
+    outlet
+    {
+        type patch;
+        faces
+        (
+            (15 13 12 14)
+        );
+    }
+);
+
+mergePatchPairs
+(
+);
+
+// ************************************************************************* //

tutorials/compressible/rhoPimpleFoam/ras/angledDuctLTS/system/controlDict

@@ -15,7 +15,7 @@ FoamFile
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
-application     rhoPimplecFoam;
+application     rhoPimpleFoam;
 
 startFrom       startTime;
 

tutorials/compressible/rhoPimpleFoam/ras/angledDuctLTS/system/fvSolution

@@ -46,16 +46,17 @@ solvers
         tolerance       1e-06;
         relTol          0;
     }
-
 }
 
 PIMPLE
 {
-    momentumPredictor yes;
-    transonic       no;
-    nOuterCorrectors 50;
-    nCorrectors     1;
+    momentumPredictor   yes;
+    transonic           no;
+    nOuterCorrectors    50;
+    nCorrectors         1;
     nNonOrthogonalCorrectors 0;
+    consistent          yes;
+
     rhoMin          0.5;
     rhoMax          2.0;
 
@@ -75,12 +76,14 @@ relaxationFactors
 {
     fields
     {
-        "p.*"           0.3;
+        "p.*"           0.9;
         "rho.*"         1;
     }
     equations
     {
-        "(U|h|k|epsilon|omega).*" 0.7;
+        "U.*"           0.9;
+        "h.*"           0.7;
+        "(k|epsilon|omega).*" 0.8;
     }
 }