Changed E to e in scalars

tutorials/combustion/fireFoam/les/smallPoolFire2D/system/createPatchDict

@@ -25,7 +25,7 @@ FoamFile
 // Tolerance used in matching faces. Absolute tolerance is span of
 // face times this factor. To load incorrectly matches meshes set this
 // to a higher value.
-matchTolerance 1E-3;
+matchTolerance 1e-3;
 
 // Do a synchronisation of coupled points after creation of any patches.
 pointSync true;

tutorials/combustion/fireFoam/les/smallPoolFire3D/system/createPatchDict

@@ -25,7 +25,7 @@ FoamFile
 // Tolerance used in matching faces. Absolute tolerance is span of
 // face times this factor. To load incorrectly matches meshes set this
 // to a higher value.
-matchTolerance 1E-3;
+matchTolerance 1e-3;
 
 // Do a synchronisation of coupled points after creation of any patches.
 pointSync true;

tutorials/heatTransfer/buoyantBoussinesqPimpleFoam/hotRoom/system/setFieldsDict

@@ -25,7 +25,7 @@ regions
     // Set patch values (using ==)
     boxToFace
     {
-        box (4.5 -1000 4.5) (5.5 1E-5 5.5);
+        box (4.5 -1000 4.5) (5.5 1e-5 5.5);
 
         fieldValues
         (

tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/hotRoom/system/setFieldsDict

@@ -25,7 +25,7 @@ regions
     // Set patch values (using ==)
     boxToFace
     {
-        box (4.5 -1000 4.5) (5.5 1E-5 5.5);
+        box (4.5 -1000 4.5) (5.5 1e-5 5.5);
 
         fieldValues
         (

tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges/system/snappyHexMeshDict

@@ -409,7 +409,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/heatTransfer/buoyantPimpleFoam/hotRoom/system/setFieldsDict

@@ -25,7 +25,7 @@ regions
     // Set patch values (using ==)
     boxToFace
     {
-        box (4.5 -1000 4.5) (5.5 1E-5 5.5);
+        box (4.5 -1000 4.5) (5.5 1e-5 5.5);
 
         fieldValues
         (

tutorials/heatTransfer/buoyantSimpleFoam/hotRoom/system/setFieldsDict

@@ -25,7 +25,7 @@ regions
     // Set patch values (using ==)
     boxToFace
     {
-        box (4.5 -1000 4.5) (5.5 1E-5 5.5);
+        box (4.5 -1000 4.5) (5.5 1e-5 5.5);
 
         fieldValues
         (

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/constant/heater/solidThermophysicalProperties

@@ -65,7 +65,7 @@ directionalSolidThermoCoeffs
         {
             type    axes;
             e1      (1 0 0);
-            e3      (-3.1807824E-6 -0.99813473 0.0610505);
+            e3      (-3.1807824e-6 -0.99813473 0.0610505);
         }
     }
 

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/system/heater/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/system/leftSolid/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionHeater/system/rightSolid/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionLiquidHeater/constant/heater/solidThermophysicalProperties

@@ -65,7 +65,7 @@ directionalSolidThermoCoeffs
         {
             type    axes;
             e1      (1 0 0);
-            e3      (-3.1807824E-6 -0.99813473 0.0610505);
+            e3      (-3.1807824e-6 -0.99813473 0.0610505);
         }
     }
 

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionLiquidHeater/system/heater/fvSolution

@@ -20,22 +20,17 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }
 
-PISO
-{
-    nNonOrthogonalCorrectors 1;
-}
-
 PIMPLE
 {
     nNonOrthogonalCorrectors 1;

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionLiquidHeater/system/leftSolid/fvSolution

@@ -20,22 +20,17 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }
 
-PISO
-{
-    nNonOrthogonalCorrectors 1;
-}
-
 PIMPLE
 {
     nNonOrthogonalCorrectors 1;

tutorials/heatTransfer/chtMultiRegionFoam/multiRegionLiquidHeater/system/rightSolid/fvSolution

@@ -20,22 +20,17 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }
 
-PISO
-{
-    nNonOrthogonalCorrectors 1;
-}
-
 PIMPLE
 {
     nNonOrthogonalCorrectors 1;

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/constant/heater/solidThermophysicalProperties

@@ -65,7 +65,7 @@ directionalSolidThermoCoeffs
         {
             type    axes;
             e1      (1 0 0);
-            e3      (-3.1807824E-6 -0.99813473 0.0610505);
+            e3      (-3.1807824e-6 -0.99813473 0.0610505);
         }
     }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/constant/leftSolid/solidThermophysicalProperties

@@ -65,7 +65,7 @@ directionalSolidThermoCoeffs
         {
             type    axes;
             e1      (1 0 0);
-            e3      (-3.1807824E-6 -0.99813473 0.0610505);
+            e3      (-3.1807824e-6 -0.99813473 0.0610505);
         }
     }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/constant/rightSolid/solidThermophysicalProperties

@@ -65,7 +65,7 @@ directionalSolidThermoCoeffs
         {
             type    axes;
             e1      (1 0 0);
-            e3      (-3.1807824E-6 -0.99813473 0.0610505);
+            e3      (-3.1807824e-6 -0.99813473 0.0610505);
         }
     }
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/heater/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/leftSolid/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/rightSolid/fvSolution

@@ -20,14 +20,14 @@ solvers
     {
         solver           PCG;
         preconditioner   DIC;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0.1;
     }
 
     TFinal
     {
         $T;
-        tolerance        1E-06;
+        tolerance        1e-06;
         relTol           0;
     }
 }

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/snappyHexMeshDict

@@ -391,7 +391,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/incompressible/pimpleDyMFoam/wingMotion/wingMotion2D_simpleFoam/system/createPatchDict

@@ -18,7 +18,7 @@ FoamFile
 // Tolerance used in matching faces. Absolute tolerance is span of
 // face times this factor. To load incorrectly matches meshes set this
 // to a higher value.
-matchTolerance 1E-3;
+matchTolerance 1e-3;
 
 // Do a synchronisation of coupled points after creation of any patches.
 // Note: this does not work with points that are on multiple coupled patches

tutorials/incompressible/pimpleDyMFoam/wingMotion/wingMotion_snappyHexMesh/system/snappyHexMeshDict

@@ -323,7 +323,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/incompressible/simpleFoam/motorBike/system/controlDict

@@ -100,8 +100,8 @@ functions
             axis        x;  //distance;
 
             // Note: tracks slightly offset so as not to be on a face
-            start       (-1.001 1E-7 0.0011);
+            start       (-1.001 1e-7 0.0011);
-            end         (-1.001 1E-7 1.0011);
+            end         (-1.001 1e-7 1.0011);
             nPoints     20;
         }
     }

tutorials/incompressible/simpleFoam/motorBike/system/snappyHexMeshDict

@@ -334,7 +334,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/incompressible/simpleFoam/windTurbineTerrain/system/snappyHexMeshDict

@@ -49,7 +49,7 @@ geometry
         type triSurfaceMesh;
         name terrain;
 
-        //tolerance   1E-5;   // optional:non-default tolerance on intersections
+        //tolerance   1e-5;   // optional:non-default tolerance on intersections
         //maxTreeDepth 10;    // optional:depth of octree. Decrease only in case
                               // of memory limitations.
 
@@ -429,7 +429,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //

tutorials/lagrangian/reactingParcelFilmFoam/panel/system/createPatchDict

@@ -17,7 +17,7 @@ FoamFile
 // Tolerance used in matching faces. Absolute tolerance is span of
 // face times this factor. To load incorrectly matches meshes set this
 // to a higher value.
-matchTolerance 1E-3;
+matchTolerance 1e-3;
 
 // Do a synchronisation of coupled points after creation of any patches.
 pointSync false;

tutorials/lagrangian/reactingParcelFilmFoam/panel/system/wallFilmRegion/createPatchDict

@@ -17,7 +17,7 @@ FoamFile
 // Tolerance used in matching faces. Absolute tolerance is span of
 // face times this factor. To load incorrectly matches meshes set this
 // to a higher value.
-matchTolerance 1E-3;
+matchTolerance 1e-3;
 
 // Do a synchronisation of coupled points after creation of any patches.
 pointSync false;

tutorials/multiphase/interPhaseChangeFoam/cavitatingBullet/system/snappyHexMeshDict

@@ -343,7 +343,7 @@ debug 0;
 
 // Merge tolerance. Is fraction of overall bounding box of initial mesh.
 // Note: the write tolerance needs to be higher than this.
-mergeTolerance 1E-6;
+mergeTolerance 1e-6;
 
 
 // ************************************************************************* //