zhyang-dev/openfoam
1
0
Fork 0
mirror of https://develop.openfoam.com/Development/openfoam.git synced 2025-11-28 03:28:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

STYLE: Correcting typos

Browse Source
This commit is contained in:
Andrew Heather
2018-03-28 17:14:16 +01:00
parent 3a569c9fd5
commit a230e8d408
486 changed files with 740 additions and 758 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C
View File

@ -718,7 +718,7 @@ void countExtrudePatches
}
}
}
// Synchronise decistion. Actual numbers are not important, just make
// Synchronise decision. Actual numbers are not important, just make
// sure that they're > 0 on all processors.
Pstream::listCombineGather(zoneSidePatch, plusEqOp<label>());
Pstream::listCombineScatter(zoneSidePatch);
@ -2428,7 +2428,7 @@ int main(int argc, char *argv[])
meshMod
);
// Enforce actual point posititions according to extrudeModel (model)
// Enforce actual point positions according to extrudeModel (model)
// (extruder.setRefinement only does fixed expansionRatio)
// The regionPoints and nLayers are looped in the same way as in
// createShellMesh

16
applications/utilities/mesh/generation/foamyMesh/conformalVoronoi2DMesh/cv2DControls/cv2DControls.H
View File

@ -81,15 +81,15 @@ public:
// Controls
//- Minimum cell size below which protusions through the surface are
// not split
//- Minimum cell size below which protrusions through the surface
//- are not split
scalar minCellSize_;
//- Square of minCellSize
scalar minCellSize2_;
//- Maximum quadrant angle allowed at a concave corner before
// additional "mitering" lines are added
//- additional "mitering" lines are added
scalar maxQuadAngle_;
//- Near-wall region where cells are aligned with the wall
@ -126,22 +126,22 @@ public:
//- Square of span
scalar span2_;
//- Minumum edge-length of the cell size below which protusions
// through the surface are not split
//- Minimum edge-length of the cell size below which protrusions
//- through the surface are not split
scalar minEdgeLen_;
//- Square of minEdgeLen
scalar minEdgeLen2_;
//- Maximum notch size below which protusions into the surface are
// not filled
//- not filled
scalar maxNotchLen_;
//- Square of maxNotchLen
scalar maxNotchLen2_;
//- The minimum distance alowed between a dual-cell vertex
// and the surface before a point-pair is introduced
//- The minimum distance allowed between a dual-cell vertex
//- and the surface before a point-pair is introduced
scalar minNearPointDist_;
//- Square of minNearPoint

4
applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H
View File

@ -439,7 +439,7 @@ private:
) const;
//- Check to see if dual cell specified by given vertex iterator
// intersects the boundary and hence reqires a point-pair
// intersects the boundary and hence requires a point-pair
bool dualCellSurfaceAnyIntersection
(
const Delaunay::Finite_vertices_iterator& vit
@ -726,7 +726,7 @@ private:
label classifyBoundaryPoint(Cell_handle cit) const;
//- Index all of the the Delaunay cells and calculate their dual points
//- Index all of the Delaunay cells and calculate their dual points
void indexDualVertices
(
pointField& pts,

4
applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMeshFeaturePoints.C
View File

@ -513,7 +513,7 @@ void Foam::conformalVoronoiMesh::createExternalEdgePointGroup
// Convex. So refPt will be inside domain and hence a master point
Foam::point refPt = edgePt - ppDist*refVec;
// Insert the master point pairing the the first slave
// Insert the master point pairing the first slave
if (!geometryToConformTo_.inside(refPt))
{
@ -532,7 +532,7 @@ void Foam::conformalVoronoiMesh::createExternalEdgePointGroup
);
// Insert the slave points by reflecting refPt in both faces.
// with each slave refering to the master
// with each slave referring to the master
Foam::point reflectedA = refPt + 2*ppDist*nA;
pts.append

2
applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C
View File

@ -636,7 +636,7 @@ bool Foam::autoDensity::fillBox
}
// Using the sampledPoints as the first test locations as they are
// randomly shuffled, but unfiormly sampling space and have wellInside
// randomly shuffled, but uniformly sampling space and have wellInside
// and size data already
maxDensity = 1/pow3(max(minCellSize, SMALL));

2
applications/utilities/mesh/generation/foamyMesh/foamyHexMesh/foamyHexMeshDict
View File

@ -422,7 +422,7 @@ polyMeshFiltering
// Maximum number of times an to allow an equal faceSet to be
// returned from the face quality assessment before stopping iterations
// to break an infinitie loop.
// to break an infinite loop.
maxConsecutiveEqualFaceSets 5;
// Remove little steps (almost perp to surface) by collapsing face.
surfaceStepFaceAngle 80;

4
applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C
View File

@ -590,7 +590,7 @@ void Foam::CV2D::newPoints()
0.5*(sizes[vA->index()] + sizes[vB->index()]);
// Test for changing aspect ratio on second alignment (first
// alignment is neartest surface normal)
// alignment is nearest surface normal)
// if (aD == 1)
// {
// targetFaceSize *= 2.0;
@ -773,7 +773,7 @@ void Foam::CV2D::newPoints()
if (!is_infinite(ec)) break;
} while (++ec != ecStart);
// Store the start-end of the first non-infinte edge
// Store the start-end of the first non-infinite edge
point2D de0 = toPoint2D(circumcenter(ec->first));
// Keep track of the maximum edge length^2

10
applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.H
View File

@ -33,10 +33,10 @@ Description
// Min cell size used in tolerances when inserting points for
// boundary conforming.
// Also used to as the grid spacing usind in insertGrid.
// Also used to as the grid spacing using in insertGrid.
minCellSize 0.05;
// Feature angle used to inser feature points
// Feature angle used to insert feature points
// 0 = all features, 180 = no features
featureAngle 45;
@ -185,7 +185,7 @@ private:
//- Keep track of the boundary conform point-pairs
// stored after the insertion of the surface point-pairs in case
// the boundary conform function is called more than once without
// removing and insertin the surface point-pairs
// removing and inserting the surface point-pairs
label startOfBoundaryConformPointPairs_;
//- Store the feature points
@ -268,7 +268,7 @@ private:
);
//- Check to see if dual cell specified by given vertex iterator
// intersects the boundary and hence reqires a point-pair.
// intersects the boundary and hence requires a point-pair.
bool dualCellSurfaceIntersection
(
const Triangulation::Finite_vertices_iterator& vit
@ -311,7 +311,7 @@ private:
void markNearBoundaryPoints();
//- Restore the Delaunay contraint
//- Restore the Delaunay constraint
void fast_restore_Delaunay(Vertex_handle vh);
// Flip operations used by fast_restore_Delaunay

6
applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/indexedVertex.H
View File

@ -169,14 +169,14 @@ public:
// Friend Functions
//- Do the two given vertices consitute a boundary point-pair
//- Do the two given vertices constitute a boundary point-pair
friend bool pointPair <Gt, Vb>
(
const indexedVertex<Gt, Vb>& v0,
const indexedVertex<Gt, Vb>& v1
);
//- Do the three given vertices consitute a boundary triangle
//- Do the three given vertices constitute a boundary triangle
friend bool boundaryTriangle <Gt, Vb>
(
const indexedVertex<Gt, Vb>& v0,
@ -184,7 +184,7 @@ public:
const indexedVertex<Gt, Vb>& v2
);
//- Do the three given vertices consitute an outside triangle
//- Do the three given vertices constitute an outside triangle
friend bool outsideTriangle <Gt, Vb>
(
const indexedVertex<Gt, Vb>& v0,

2
applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/insertSurfaceNearestPointPairs.C
View File

@ -49,7 +49,7 @@ bool Foam::CV2D::dualCellSurfaceIntersection
point e1 = toPoint3D(circumcenter(ec->first->neighbor(ec->second)));
// If other edge end is ouside bounding box then edge cuts boundary
// If other edge end is outside bounding box then edge cuts boundary
if (!qSurf_.globalBounds().contains(e1))
{
return true;

2
applications/utilities/mesh/generation/snappyHexMesh/snappyHexMesh.C
View File

@ -1319,7 +1319,7 @@ int main(int argc, char *argv[])
}
// For now: have single faceZone per surface. Use first
// region in surface for patch for zoneing
// region in surface for patch for zoning
if (regNames.size())
{
label globalRegioni = surfaces.globalRegion(surfi, 0);

2
applications/utilities/mesh/generation/snappyHexMesh/snappyHexMeshDict
View File

@ -277,7 +277,7 @@ castellatedMeshControls
// in a given geometric region. The syntax is exactly the same as for the
// refinementRegions; the cell level now specifies the upper limit
// for any cell. Note that it does not override the refinement constraints
// given by the nCellsBetweenLevels settting.
// given by the nCellsBetweenLevels setting.
limitRegions
{
}