Documentation: converted javadoc @ to LaTeX style \ in Doxygen code docs

applications/solvers/combustion/PDRFoam/PDRModels/turbulence/PDRkEpsilon/PDRkEpsilon.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,7 +30,7 @@ Description
     corresponding to PDR basic drag model (\link basic.H \endlink)
 
     The default model coefficients correspond to the following:
-    @verbatim
+    \verbatim
         PDRkEpsilonCoeffs
         {
             Cmu         0.09;
@@ -41,7 +41,7 @@ Description
             sigmaEps    1.3;
             Prt         1.0;    // only for compressible
         }
-    @endverbatim
+    \endverbatim
 
     The turbulence source term \f$ G_{R} \f$ appears in the
     \f$ \kappa-\epsilon \f$ equation for the generation of turbulence due to

applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEBlendXiEq/SCOPEBlendXiEq.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,7 +27,7 @@ Class
 Description
     Simple SCOPEBlendXiEq model for XiEq based on SCOPEXiEqs correlation
     with a linear correction function to give a plausible profile for XiEq.
-    See @link SCOPELaminarFlameSpeed.H @endlink for details on the SCOPE
+    See \link SCOPELaminarFlameSpeed.H \endlink for details on the SCOPE
     laminar flame speed model.
 
 SourceFiles

applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/instabilityXiEq/instabilityXiEq.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,7 +27,7 @@ Class
 Description
     This is the equilibrium level of the flame wrinkling generated by
     instability. It is a constant (default 2.5). It is used in
-    @link XiModel.H @endlink.
+    \link XiModel.H \endlink.
 
 SourceFiles
     instability.C

applications/solvers/incompressible/adjointShapeOptimizationFoam/adjointShapeOptimizationFoam.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,7 +30,7 @@ Description
     causing pressure loss as estimated using an adjoint formulation.
 
     References:
-    @verbatim
+    \verbatim
         "Implementation of a continuous adjoint for topology optimization of
          ducted flows"
         C. Othmer,
@@ -38,7 +38,7 @@ Description
         H.G. Weller
         AIAA-2007-3947
         http://pdf.aiaa.org/preview/CDReadyMCFD07_1379/PV2007_3947.pdf
-    @endverbatim
+    \endverbatim
 
     Note that this solver optimises for total pressure loss whereas the
     above paper describes the method for optimising power-loss.

applications/solvers/multiphase/interPhaseChangeFoam/phaseChangeTwoPhaseMixtures/Kunz/Kunz.H

@@ -32,14 +32,14 @@ Description
     implicit term in the pressure equation.
 
     Reference:
-    @verbatim
+    \verbatim
         Kunz, R.F., Boger, D.A., Stinebring, D.R., Chyczewski, Lindau. J.W.,
         Gibeling, H.J., Venkateswaran, S., Govindan, T.R.,
         “A Preconditioned Implicit Method for Two-Phase Flows with Application
          to Cavitation Prediction,”
         Computers and Fluids,
         29(8):849-875, 2000.
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     Kunz.C

applications/solvers/multiphase/interPhaseChangeFoam/phaseChangeTwoPhaseMixtures/Merkle/Merkle.H

@@ -28,12 +28,12 @@ Description
     Merkle cavitation model.
 
     Reference:
-    @verbatim
+    \verbatim
         C. L. Merkle, J. Feng, and P. E. O. Buelow,
         "Computational modeling of the dynamics of sheet cavitation",
         in Proceedings Third International Symposium on Cavitation
         Grenoble, France 1998.
-   @endverbatim
+   \endverbatim
 
 SourceFiles
     Merkle.C

applications/solvers/multiphase/interPhaseChangeFoam/phaseChangeTwoPhaseMixtures/SchnerrSauer/SchnerrSauer.H

@@ -28,12 +28,12 @@ Description
     SchnerrSauer cavitation model.
 
     Reference:
-    @verbatim
+    \verbatim
         Schnerr, G. H., And Sauer, J.,
         "Physical and Numerical Modeling of Unsteady Cavitation Dynamics",
         Proc. 4th International Conference on Multiphase Flow,
         New Orleans, U.S.A., 2001.
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     SchnerrSauer.C

applications/test/Distribution/Test-Distribution.C

@@ -29,12 +29,12 @@ Description
 
     Plot normal distribution test in gnuplot using:
 
-    @verbatim
+    \verbatim
     normalDistribution(mean, sigma, x) = \
         sqrt(1.0/(2.0*pi*sigma**2))*exp(-(x - mean)**2.0/(2.0*sigma**2))
 
     plot normalDistribution(8.5, 2.5, x), "Distribution_scalar_test_x" w p
-    @endverbatim
+    \endverbatim
 
 \*---------------------------------------------------------------------------*/
 

applications/utilities/mesh/conversion/foamToStarMesh/foamToStarMesh.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,16 +31,16 @@ Usage
     - foamToStarMesh [OPTION] \n
     Reads an OpenFOAM mesh and writes a pro-STAR (v4) bnd/cel/vrt format.
 
-    @param -noBnd \n
+    \param -noBnd \n
-    Suppress writing the @c .bnd file
+    Suppress writing the \c .bnd file
 
-    @param -scale \<factor\>\n
+    \param -scale \<factor\>\n
     Specify an alternative geometry scaling factor.
-    The default is @b 1000 (scale @em [m] to @em [mm]).
+    The default is \b 1000 (scale \em [m] to \em [mm]).
 
 Note
     The cellTable information available in the files
-    @c constant/cellTable and @c constant/polyMesh/cellTableId
+    \c constant/cellTable and @c constant/polyMesh/cellTableId
     will be used if available. Otherwise the cellZones are used when
     creating the cellTable information.
 

applications/utilities/mesh/conversion/foamToSurface/foamToSurface.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2010-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2010-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,11 +31,11 @@ Usage
     - foamToSurface [OPTION] \n
     Reads an OpenFOAM mesh and writes the boundaries in a surface format.
 
-    @param -scale \<factor\>\n
+    \param -scale \<factor\>\n
     Specify an alternative geometry scaling factor.
-    Eg, use @b 1000 to scale @em [m] to @em [mm].
+    Eg, use \b 1000 to scale \em [m] to \em [mm].
 
-    @param -tri \n
+    \param -tri \n
     Triangulate surface.
 
 \*---------------------------------------------------------------------------*/

applications/utilities/mesh/conversion/plot3dToFoam/plot3dToFoam.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,7 +27,7 @@ Description
     Work in progress! Handles ascii multiblock (and optionally singleBlock)
     format.
     By default expects blanking. Use -noBlank if none.
-    Use -2D @a thickness if 2D.
+    Use -2D \a thickness if 2D.
 
     Niklas Nordin has experienced a problem with lefthandedness of the blocks.
     The code should detect this automatically - see hexBlock::readPoints but

applications/utilities/mesh/conversion/star4ToFoam/star4ToFoam.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,14 +31,14 @@ Usage
     - star4ToFoam [OPTION] ccmMesh\n
       convert pro-STAR mesh to OpenFOAM
 
-    @param -ascii \n
+    \param -ascii \n
     Write in ASCII format instead of binary
 
-    @param -scale \<factor\>\n
+    \param -scale \<factor\>\n
     Specify an alternative geometry scaling factor.
-    The default is @b 0.001 (scale @em [mm] to @em [m]).
+    The default is \b 0.001 (scale \em [mm] to \em [m]).
 
-    @param -solids \n
+    \param -solids \n
     Treat any solid cells present just like fluid cells.
     The default is to discard them.
 

applications/utilities/mesh/conversion/tetgenToFoam/tetgenToFoam.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,7 +29,7 @@ Description
     and run tetgen with -f option.
 
     Sample smesh file:
-    @verbatim
+    \verbatim
         # cube.smesh -- A 10x10x10 cube
         8 3
         1       0 0 0
@@ -49,7 +49,7 @@ Description
         4       2 6 7 3 65
         0
         0
-    @endverbatim
+    \endverbatim
 
 Note
     - for some reason boundary faces point inwards. I just reverse them

applications/utilities/mesh/generation/blockMesh/blockMeshApp.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -28,20 +28,20 @@ Description
     A multi-block mesh generator.
 
     Uses the block mesh description found in
-    @a constant/polyMesh/blockMeshDict
+    \a constant/polyMesh/blockMeshDict
-    (or @a constant/\<region\>/polyMesh/blockMeshDict).
+    (or \a constant/\<region\>/polyMesh/blockMeshDict).
 
 Usage
 
     - blockMesh [OPTION]
 
-    @param -blockTopology \n
+    \param -blockTopology \n
     Write the topology as a set of edges in OBJ format.
 
-    @param -region \<name\> \n
+    \param -region \<name\> \n
     Specify an alternative mesh region.
 
-    @param -dict \<filename\> \n
+    \param -dict \<filename\> \n
     Specify alternative dictionary for the block mesh description.
 
 \*---------------------------------------------------------------------------*/

applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C

@@ -108,13 +108,13 @@ Usage
 
     - extrudeToRegionMesh \<regionName\> \<faceZones\> \<thickness\>
 
-    @param \<regionName\> \n
+    \param \<regionName\> \n
     Name of mesh to create.
 
-    @param \<faceZones\> \n
+    \param \<faceZones\> \n
     List of faceZones to extrude
 
-    @param \<thickness\> \n
+    \param \<thickness\> \n
     Thickness of extruded mesh.
 
 \*---------------------------------------------------------------------------*/

applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/patchPointEdgeCirculator.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2010-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2010-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -28,7 +28,7 @@ Description
     Walks from starting edge/face around point on patch.
 
     -# Use in-place: \n
-        @code
+        \code
             patchPointEdgeCirculator circ(..);
 
             // Walk
@@ -38,10 +38,10 @@ Description
                 ++circ;
             }
             while (circ != circ.end());
-        @endcode
+        \endcode
 
     -# Use like STL iterator: \n
-        @code
+        \code
             patchPointEdgeCirculator circ(..);
             for
             (
@@ -52,7 +52,7 @@ Description
             {
                 Info<< "edge:" << iter.edgeID() << endl;
             }
-        @endcode
+        \endcode
 
 
 SourceFiles

applications/utilities/mesh/generation/extrude2DMesh/extrude2DMeshApp.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -32,7 +32,7 @@ Usage
 
     - extrude2DMesh thickness
 
-    @param thickness \n
+    \param thickness \n
     Thickness (in metre) of slab.
 
 Note

applications/utilities/mesh/manipulation/polyDualMesh/polyDualMeshApp.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -33,18 +33,18 @@ Usage
     for it. Normal behaviour is to have each point become a cell
     (1.5 behaviour)
 
-    @param -concaveMultiCells
+    \param -concaveMultiCells
     Creates multiple cells for each point on a concave edge. Might limit
     the amount of distortion on some meshes.
 
-    @param -splitAllFaces
+    \param -splitAllFaces
     Normally only constructs a single face between two cells. This single face
     might be too distorted. splitAllFaces will create a single face for every
     original cell the face passes through. The mesh will thus have
     multiple faces inbetween two cells! (so is not strictly upper-triangular
     anymore - checkMesh will complain)
 
-    @param -doNotPreserveFaceZones:
+    \param -doNotPreserveFaceZones:
     By default all faceZones are preserved by marking all faces, edges and
     points on them as features. The -doNotPreserveFaceZones disables this
     behaviour.

applications/utilities/mesh/manipulation/stitchMesh/stitchMesh.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -40,7 +40,7 @@ Description
     Comparable to running a meshModifier of the form
     (if masterPatch is called "M" and slavePatch "S"):
 
-    @verbatim
+    \verbatim
     couple
     {
         type                    slidingInterface;
@@ -52,7 +52,7 @@ Description
         slavePatchName          S;
         typeOfMatch             partial or integral
     }
-    @endverbatim
+    \endverbatim
 
 
 \*---------------------------------------------------------------------------*/

applications/utilities/parallelProcessing/decomposePar/decomposePar.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -32,30 +32,30 @@ Usage
 
     - decomposePar [OPTION]
 
-    @param -cellDist \n
+    \param -cellDist \n
     Write the cell distribution as a labelList, for use with 'manual'
     decomposition method or as a volScalarField for post-processing.
 
-    @param -region regionName \n
+    \param -region regionName \n
     Decompose named region. Does not check for existence of processor*.
 
-    @param -copyUniform \n
+    \param -copyUniform \n
-    Copy any @a uniform directories too.
+    Copy any \a uniform directories too.
 
-    @param -constant \n
+    \param -constant \n
     Override controlDict settings and use constant directory.
 
-    @param -fields \n
+    \param -fields \n
     Use existing geometry decomposition and convert fields only.
 
-    @param -force \n
+    \param -force \n
-    Remove any existing @a processor subdirectories before decomposing the
+    Remove any existing \a processor subdirectories before decomposing the
     geometry.
 
-    @param -ifRequired \n
+    \param -ifRequired \n
     Only decompose the geometry if the number of domains has changed from a
-    previous decomposition. No @a processor subdirectories will be removed
+    previous decomposition. No \a processor subdirectories will be removed
-    unless the @a -force option is also specified. This option can be used
+    unless the \a -force option is also specified. This option can be used
     to avoid redundant geometry decomposition (eg, in scripts), but should
     be used with caution when the underlying (serial) geometry or the
     decomposition method etc. have been changed between decompositions.

applications/utilities/parallelProcessing/redistributeMeshPar/redistributeMeshPar.C

@@ -32,7 +32,7 @@ Description
     Balances mesh and writes new mesh to new time directory.
 
     Can also work like decomposePar:
-    @verbatim
+    \verbatim
         # Create empty processor directories (have to exist for argList)
         mkdir processor0
                 ..
@@ -43,7 +43,7 @@ Description
 
         # Distribute
         mpirun -np ddd redistributeMeshPar -parallel
-    @endverbatim
+    \endverbatim
 \*---------------------------------------------------------------------------*/
 
 #include "fvMesh.H"

applications/utilities/postProcessing/dataConversion/foamToEnsight/foamToEnsight.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,22 +30,22 @@ Usage
     - foamToEnsight [OPTION] \n
     Translates OpenFOAM data to Ensight format
 
-    @param -ascii \n
+    \param -ascii \n
     Write Ensight data in ASCII format instead of "C Binary"
 
-    @param -patches patchList \n
+    \param -patches patchList \n
     Specify particular patches to write.
     Specifying an empty list suppresses writing the internalMesh.
 
-    @param -noPatches \n
+    \param -noPatches \n
     Suppress writing any patches.
 
-    @param -faceZones zoneList \n
+    \param -faceZones zoneList \n
     Specify faceZones to write, with wildcards
 
 Note
     Parallel support for cloud data is not supported
-    - writes to @a EnSight directory to avoid collisions with foamToEnsightParts
+    - writes to \a EnSight directory to avoid collisions with foamToEnsightParts
 
 \*---------------------------------------------------------------------------*/
 

applications/utilities/postProcessing/dataConversion/foamToEnsightParts/foamToEnsightParts.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -32,23 +32,23 @@ Usage
     - foamToEnsightParts [OPTION] \n
     Translates OpenFOAM data to Ensight format
 
-    @param -ascii \n
+    \param -ascii \n
     Write Ensight data in ASCII format instead of "C Binary"
 
-    @param -noZero \n
+    \param -noZero \n
     Exclude the often incomplete initial conditions.
 
-    @param -index \<start\>\n
+    \param -index \<start\>\n
     Ignore the time index contained in the time file and use a
-    simple indexing when creating the @c Ensight/data/######## files.
+    simple indexing when creating the \c Ensight/data/######## files.
 
-    @param -noMesh \n
+    \param -noMesh \n
     Suppress writing the geometry. Can be useful for converting partial
     results for a static geometry.
 
 Note
     - no parallel data.
-    - writes to @a Ensight directory to avoid collisions with foamToEnsight.
+    - writes to \a Ensight directory to avoid collisions with foamToEnsight.
 
 \*---------------------------------------------------------------------------*/
 

applications/utilities/postProcessing/dataConversion/foamToTecplot360/foamToTecplot360.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,40 +31,40 @@ Usage
 
     - foamToTecplot360 [OPTION]
 
-    @param -fields \<names\>\n
+    \param -fields \<names\>\n
     Convert selected fields only. For example,
-    @verbatim
+    \verbatim
          -fields '( p T U )'
-    @endverbatim
+    \endverbatim
     The quoting is required to avoid shell expansions and to pass the
     information as a single argument.
 
-    @param -cellSet \<name\>\n
+    \param -cellSet \<name\>\n
-    @param -faceSet \<name\>\n
+    \param -faceSet \<name\>\n
     Restrict conversion to the cellSet, faceSet.
 
-    @param -nearCellValue \n
+    \param -nearCellValue \n
     Output cell value on patches instead of patch value itself
 
-    @param -noInternal \n
+    \param -noInternal \n
     Do not generate file for mesh, only for patches
 
-    @param -noPointValues \n
+    \param -noPointValues \n
     No pointFields
 
-    @param -noFaceZones \n
+    \param -noFaceZones \n
     No faceZones
 
-    @param -excludePatches \<patchNames\>\n
+    \param -excludePatches \<patchNames\>\n
     Specify patches (wildcards) to exclude. For example,
-    @verbatim
+    \verbatim
          -excludePatches '( inlet_1 inlet_2 "proc.*")'
-    @endverbatim
+    \endverbatim
     The quoting is required to avoid shell expansions and to pass the
     information as a single argument. The double quotes denote a regular
     expression.
 
-    @param -useTimeName \n
+    \param -useTimeName \n
     use the time index in the VTK file name instead of the time index
 
 \*---------------------------------------------------------------------------*/

applications/utilities/postProcessing/dataConversion/foamToVTK/foamToVTK.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -40,59 +40,59 @@ Usage
 
     - foamToVTK [OPTION]
 
-    @param -ascii \n
+    \param -ascii \n
     Write VTK data in ASCII format instead of binary.
 
-    @param -mesh \<name\>\n
+    \param -mesh \<name\>\n
     Use a different mesh name (instead of -region)
 
-    @param -fields \<fields\>\n
+    \param -fields \<fields\>\n
     Convert selected fields only. For example,
-    @verbatim
+    \verbatim
          -fields "( p T U )"
-    @endverbatim
+    \endverbatim
     The quoting is required to avoid shell expansions and to pass the
     information as a single argument.
 
-    @param -surfaceFields \n
+    \param -surfaceFields \n
     Write surfaceScalarFields (e.g., phi)
 
-    @param -cellSet \<name\>\n
+    \param -cellSet \<name\>\n
-    @param -faceSet \<name\>\n
+    \param -faceSet \<name\>\n
-    @param -pointSet \<name\>\n
+    \param -pointSet \<name\>\n
     Restrict conversion to the cellSet, faceSet or pointSet.
 
-    @param -nearCellValue \n
+    \param -nearCellValue \n
     Output cell value on patches instead of patch value itself
 
-    @param -noInternal \n
+    \param -noInternal \n
     Do not generate file for mesh, only for patches
 
-    @param -noPointValues \n
+    \param -noPointValues \n
     No pointFields
 
-    @param -noFaceZones \n
+    \param -noFaceZones \n
     No faceZones
 
-    @param -noLinks \n
+    \param -noLinks \n
     (in parallel) do not link processor files to master
 
-    @param poly \n
+    \param poly \n
     write polyhedral cells without tet/pyramid decomposition
 
-    @param -allPatches \n
+    \param -allPatches \n
     Combine all patches into a single file
 
-    @param -excludePatches \<patchNames\>\n
+    \param -excludePatches \<patchNames\>\n
     Specify patches (wildcards) to exclude. For example,
-    @verbatim
+    \verbatim
          -excludePatches '( inlet_1 inlet_2 "proc.*")'
-    @endverbatim
+    \endverbatim
     The quoting is required to avoid shell expansions and to pass the
     information as a single argument. The double quotes denote a regular
     expression.
 
-    @param -useTimeName \n
+    \param -useTimeName \n
     use the time index in the VTK file name instead of the time index
 
 Note
@@ -110,7 +110,7 @@ Note
     However can have .pvd file format which refers to time simulation
     if XML *.vtu files are available:
 
-    @verbatim
+    \verbatim
       <?xml version="1.0"?>
       <VTKFile type="Collection"
            version="0.1"
@@ -129,7 +129,7 @@ Note
           <DataSet timestep="500" file="pitzDaily_11.vtu"/>
         </Collection>
       </VTKFile>
-    @endverbatim
+    \endverbatim
 
 \*---------------------------------------------------------------------------*/
 

applications/utilities/postProcessing/graphics/PV3Readers/PV3FoamReader/vtkPV3Foam/vtkPV3FoamUtils.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -45,7 +45,7 @@ Description
 
 namespace Foam
 {
-    //! @cond fileScope
+    //! \cond fileScope
     //  Extract up to the first non-word characters
     inline word getFirstWord(const char* str)
     {
@@ -64,7 +64,7 @@ namespace Foam
         }
 
     }
-    //! @endcond
+    //! \endcond
 
 } // End namespace Foam
 

applications/utilities/postProcessing/graphics/PV3Readers/PV3blockMeshReader/vtkPV3blockMesh/vtkPV3blockMeshUtils.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2009-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2009-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -39,7 +39,7 @@ Description
 
 namespace Foam
 {
-    //! @cond fileScope
+    //! \cond fileScope
     //  Extract up to the first non-word characters
     inline word getFirstWord(const char* str)
     {
@@ -58,7 +58,7 @@ namespace Foam
         }
 
     }
-    //! @endcond
+    //! \endcond
 
 } // End namespace Foam
 

applications/utilities/postProcessing/graphics/PV3Readers/vtkPV3Readers/vtkPV3Readers.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -45,7 +45,7 @@ defineTypeNameAndDebug(Foam::vtkPV3Readers, 0);
 
 namespace Foam
 {
-    //! @cond fileScope
+    //! \cond fileScope
     //  Extract up to the first non-word characters
     inline word getFirstWord(const char* str)
     {
@@ -64,7 +64,7 @@ namespace Foam
         }
 
     }
-    //! @endcond
+    //! \endcond
 
 } // End namespace Foam
 

applications/utilities/postProcessing/miscellaneous/foamListTimes/foamListTimes.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,7 +31,7 @@ Usage
 
     - foamListTimes [OPTION]
 
-    @param -processor \n
+    \param -processor \n
     List times from processor0/ directory
 
 \*---------------------------------------------------------------------------*/

applications/utilities/postProcessing/sampling/sample/sample.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,13 +27,13 @@ Description
 
     Keywords:
 
-    @param setFormat : set output format, choice of \n
+    \param setFormat : set output format, choice of \n
       - xmgr
       - jplot
       - gnuplot
       - raw
 
-    @param surfaceFormat : surface output format, choice of \n
+    \param surfaceFormat : surface output format, choice of \n
       - null        : suppress output
       - foamFile    : separate points, faces and values file
       - dx          : DX scalar or vector format
@@ -42,7 +42,7 @@ Description
       - obj         : Wavefron stl. Does not contain values!
       - stl         : ascii stl. Does not contain values!
 
-    @param interpolationScheme : interpolation scheme, choice of \n
+    \param interpolationScheme : interpolation scheme, choice of \n
       - cell          : use cell-centre value; constant over cells (default)
       - cellPoint     : use cell-centre and vertex values
       - cellPointFace : use cell-centre, vertex and face values. \n
@@ -50,9 +50,9 @@ Description
         -# face values determined using the current face interpolation scheme
            for the field (linear, limitedLinear, etc.)
 
-    @param fields : list of fields to sample
+    \param fields : list of fields to sample
 
-    @param sets : list of sets to sample, choice of \n
+    \param sets : list of sets to sample, choice of \n
       - uniform             evenly distributed points on line
       - face                one point per face intersection
       - midPoint            one point per cell, inbetween two face intersections
@@ -74,7 +74,7 @@ Description
             uniform: extra number of sampling points
             curve, cloud: list of coordinates
 
-    @param surfaces : list of surfaces to sample, choice of \n
+    \param surfaces : list of surfaces to sample, choice of \n
       - plane : values on plane defined by point, normal.
       - patch : values on patch.
 

applications/utilities/postProcessing/velocityField/flowType/flowType.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,7 +30,7 @@ Description
     The -noWrite option has no meaning.
 
     The flow type parameter is obtained according to the following equation:
-    @verbatim
+    \verbatim
                  |D| - |Omega|
         lambda = -------------
                  |D| + |Omega|
@@ -38,7 +38,7 @@ Description
         -1 = rotational flow
          0 = simple shear flow
          1 = planar extensional flow
-    @endverbatim
+    \endverbatim
 
 \*---------------------------------------------------------------------------*/
 

applications/utilities/preProcessing/changeDictionary/changeDictionary.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,10 +29,10 @@ Description
     type in the field and polyMesh/boundary files.
 
     Reads dictionaries (fields) and entries to change from a dictionary.
-    E.g. to make the @em movingWall a @em fixedValue for @em p but all other
+    E.g. to make the \em movingWall a \em fixedValue for @em p but all other
-    @em Walls a zeroGradient boundary condition, the
+    \em Walls a zeroGradient boundary condition, the
-    @c system/changeDictionaryDict would contain the following:
+    \c system/changeDictionaryDict would contain the following:
-    @verbatim
+    \verbatim
     dictionaryReplacement
     {
         p                           // field to change
@@ -51,13 +51,13 @@ Description
             }
         }
     }
-    @endverbatim
+    \endverbatim
 
 Usage
 
     - changeDictionary [OPTION]
 
-    @param -literalRE \n
+    \param -literalRE \n
     Do not interpret regular expressions; treat them as any other keyword.
 
 

applications/utilities/preProcessing/foamUpgradeCyclics/foamUpgradeCyclics.C

@@ -31,7 +31,7 @@ Usage
 
     - foamUpgradeCyclics [OPTION]
 
-    @param -test \n
+    \param -test \n
     Suppress writing the updated files with split cyclics
 
 \*---------------------------------------------------------------------------*/

applications/utilities/preProcessing/foamUpgradeFvSolution/foamUpgradeFvSolution.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,7 +31,7 @@ Usage
 
     - foamUpgradeFvSolution [OPTION]
 
-    @param -test \n
+    \param -test \n
     Suppress writing the updated fvSolution file
 
 \*---------------------------------------------------------------------------*/

applications/utilities/surface/surfaceConvert/surfaceConvert.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,13 +30,13 @@ Description
 Usage
     - surfaceConvert inputFile outputFile [OPTION]
 
-    @param -clean \n
+    \param -clean \n
     Perform some surface checking/cleanup on the input surface
 
-    @param -scale \<scale\> \n
+    \param -scale \<scale\> \n
     Specify a scaling factor for writing the files
 
-    @param -group \n
+    \param -group \n
     Orders faces by region
 
 Note

applications/utilities/surface/surfaceMeshConvert/surfaceMeshConvert.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2009-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2009-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,25 +31,25 @@ Description
 Usage
     - surfaceMeshConvert inputFile outputFile [OPTION]
 
-    @param -clean \n
+    \param -clean \n
     Perform some surface checking/cleanup on the input surface.
 
-    @param -scaleIn \<scale\> \n
+    \param -scaleIn \<scale\> \n
     Specify a scaling factor when reading files.
 
-    @param -scaleOut \<scale\> \n
+    \param -scaleOut \<scale\> \n
     Specify a scaling factor when writing files.
 
-    @param -dict \<dictionary\> \n
+    \param -dict \<dictionary\> \n
     Specify an alternative dictionary for constant/coordinateSystems.
 
-    @param -from \<coordinateSystem\> \n
+    \param -from \<coordinateSystem\> \n
     Specify a coordinate System when reading files.
 
-    @param -to \<coordinateSystem\> \n
+    \param -to \<coordinateSystem\> \n
     Specify a coordinate System when writing files.
 
-    @param -tri \n
+    \param -tri \n
     Triangulate surface.
 
 Note

applications/utilities/surface/surfaceMeshConvertTesting/surfaceMeshConvertTesting.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,19 +31,19 @@ Description
 Usage
     - surfaceMeshConvertTesting inputFile outputFile [OPTION]
 
-    @param -clean \n
+    \param -clean \n
     Perform some surface checking/cleanup on the input surface
 
-    @param -orient \n
+    \param -orient \n
     Check face orientation on the input surface
 
-    @param -scale \<scale\> \n
+    \param -scale \<scale\> \n
     Specify a scaling factor for writing the files
 
-    @param -triSurface \n
+    \param -triSurface \n
     Use triSurface library for input/output
 
-    @param -keyed \n
+    \param -keyed \n
     Use keyedSurface for input/output
 
 Note

applications/utilities/surface/surfaceMeshExport/surfaceMeshExport.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -32,25 +32,25 @@ Description
 Usage
     - surfaceMeshExport outputFile [OPTION]
 
-    @param -clean \n
+    \param -clean \n
     Perform some surface checking/cleanup on the input surface.
 
-    @param -name \<name\> \n
+    \param -name \<name\> \n
     Specify an alternative surface name when writing.
 
-    @param -scaleIn \<scale\> \n
+    \param -scaleIn \<scale\> \n
     Specify a scaling factor when reading files.
 
-    @param -scaleOut \<scale\> \n
+    \param -scaleOut \<scale\> \n
     Specify a scaling factor when writing files.
 
-    @param -dict \<dictionary\> \n
+    \param -dict \<dictionary\> \n
     Specify an alternative dictionary for constant/coordinateSystems.
 
-    @param -from \<coordinateSystem\> \n
+    \param -from \<coordinateSystem\> \n
     Specify a coordinate system when reading files.
 
-    @param -to \<coordinateSystem\> \n
+    \param -to \<coordinateSystem\> \n
     Specify a coordinate system when writing files.
 
 Note

applications/utilities/surface/surfaceMeshImport/surfaceMeshImport.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -32,25 +32,25 @@ Description
 Usage
     - surfaceMeshImport inputFile [OPTION]
 
-    @param -clean \n
+    \param -clean \n
     Perform some surface checking/cleanup on the input surface.
 
-    @param -name \<name\> \n
+    \param -name \<name\> \n
     Specify an alternative surface name when writing.
 
-    @param -scaleIn \<scale\> \n
+    \param -scaleIn \<scale\> \n
     Specify a scaling factor when reading files.
 
-    @param -scaleOut \<scale\> \n
+    \param -scaleOut \<scale\> \n
     Specify a scaling factor when writing files.
 
-    @param -dict \<dictionary\> \n
+    \param -dict \<dictionary\> \n
     Specify an alternative dictionary for constant/coordinateSystems.
 
-    @param -from \<coordinateSystem\> \n
+    \param -from \<coordinateSystem\> \n
     Specify a coordinate system when reading files.
 
-    @param -to \<coordinateSystem\> \n
+    \param -to \<coordinateSystem\> \n
     Specify a coordinate system when writing files.
 
 Note

doc/codingStyleGuide.org

@@ -1,13 +1,14 @@
 #                            -*- mode: org; -*-
 #
 #+TITLE:                 OpenFOAM C++ style guide
-#+AUTHOR:                      OpenCFD Ltd.
+#+AUTHOR:                     2011 OpenCFD Ltd.
-#+DATE:                         June 2010
+#+DATE:                         Feb 2011
 #+LINK:                  http://www.opencfd.co.uk
 #+OPTIONS: author:nil ^:{}
+#+STARTUP: hidestars
+#+STARTUP: odd
 
 * OpenFOAM C++ style guide
-
 *** General
     + 80 character lines max
     + The normal indentation is 4 spaces per logical level.
@@ -23,29 +24,22 @@
     + stream output
       + =<<= is always four characters after the start of the stream,
         so that the =<<= symbols align, i.e.
-
         #+BEGIN_EXAMPLE
         Info<< ...
         os  << ...
         #+END_EXAMPLE
-
         so
-
         #+BEGIN_EXAMPLE
         WarningIn("className::functionName()")
             << "Warning message"
         #+END_EXAMPLE
-
         NOT
-
         #+BEGIN_EXAMPLE
         WarningIn("className::functionName()")
         << "Warning message"
         #+END_EXAMPLE
 
-
     + no unnecessary class section headers, i.e. remove
-
 #+BEGIN_EXAMPLE
 // * * * * * * * * * * * * * Private Member Functions  * * * * * * * * * * * //
 
@@ -55,12 +49,9 @@
 
     // Write
 #+END_EXAMPLE
-
-
       if they contain nothing, even if planned for 'future use'
 
     + class titles are centred
-
 #+BEGIN_EXAMPLE
 /*---------------------------------------------------------------------------*\
                         Class exampleClass Declaration
@@ -79,32 +70,26 @@
     + header file spacing
       + Leave two empty lines between sections
         (as per functions in the /.C/ file etc)
-
     + use =//- Comment= comments in header file
       + add descriptions to class data and functions
     + destructor
       + If adding a comment to the destructor -
         use =//-= and code as a normal function:
-
         #+BEGIN_EXAMPLE
         //- Destructor
         ~className();
         #+END_EXAMPLE
-
     + inline functions
-      + Use inline functions where appropriate in a separate /classNameI.H/ file.
+      + Use inline functions where appropriate in a separate /classNameI.H/
-        Avoid cluttering the header file with function bodies.
+        file.  Avoid cluttering the header file with function bodies.
 
 *** The /.C/ Files
     + Do not open/close namespaces in a /.C/ file
       + Fully scope the function name, i.e.
-
         #+BEGIN_EXAMPLE
         Foam::returnType Foam::className::functionName()
         #+END_EXAMPLE
-
         NOT
-
         #+BEGIN_EXAMPLE
         namespace Foam
         {
@@ -113,12 +98,10 @@
             ...
         }
         #+END_EXAMPLE
-
         EXCEPTION
 
-      When there are multiple levels of namespace, they may be used in the /.C/
+        When there are multiple levels of namespace, they may be used in the
-      file, i.e.
+        /.C/ file, i.e.
-
         #+BEGIN_EXAMPLE
         namespace Foam
         {
@@ -137,21 +120,16 @@
 *** Coding Practice
     + passing data as arguments or return values.
       + Pass bool, label and scalar as copy, anything larger by reference.
-
     + const
       + Use everywhere it is applicable.
-
     + variable initialisation using
       #+BEGIN_EXAMPLE
       const className& variableName = otherClass.data();
       #+END_EXAMPLE
-
       NOT
-
       #+BEGIN_EXAMPLE
       const className& variableName(otherClass.data());
       #+END_EXAMPLE
-
     + virtual functions
       + If a class is virtual, make all derived classes virtual.
 
@@ -162,9 +140,7 @@
         code;
     }
     #+END_EXAMPLE
-
     OR
-
     #+BEGIN_EXAMPLE
     if
     (
@@ -174,9 +150,7 @@
         code;
     }
     #+END_EXAMPLE
-
     NOT (no space between =if= and =(= used)
-
     #+BEGIN_EXAMPLE
     if(condition)
     {
@@ -185,16 +159,13 @@
     #+END_EXAMPLE
 
 *** =for= and =while= Loops
-
     #+BEGIN_EXAMPLE
     for (i = 0; i < maxI; i++)
     {
         code;
     }
     #+END_EXAMPLE
-
     OR
-
     #+BEGIN_EXAMPLE
     for
     (
@@ -206,32 +177,25 @@
         code;
     }
     #+END_EXAMPLE
-
     NOT this (no space between =for= and =(= used)
-
     #+BEGIN_EXAMPLE
     for(i = 0; i < maxI; i++)
     {
         code;
     }
     #+END_EXAMPLE
-
     Note that when indexing through iterators, it is often slightly more
     efficient to use the pre-increment form. Eg, =++iter= instead of =iter++=
 
 *** =forAll=, =forAllIter=, =forAllConstIter=, etc. loops
     like =for= loops, but
-
     #+BEGIN_EXAMPLE
     forAll(
     #+END_EXAMPLE
-
     NOT
-
     #+BEGIN_EXAMPLE
     forAll (
     #+END_EXAMPLE
-
     Using the =forAllIter= and =forAllConstIter= macros is generally
     advantageous - less typing, easier to find later.  However, since
     they are macros, they will fail if the iterated object contains
@@ -242,68 +206,48 @@
     #+BEGIN_EXAMPLE
     forAllIter(HashTable<labelPair, edge, Hash<edge> >, foo, iter)
     #+END_EXAMPLE
-
     These convenience macros are also generally avoided in other
     container classes and OpenFOAM primitive classes.
 
 *** Splitting Over Multiple Lines
-
+***** Splitting return type and function name
-**** Splitting return type and function name
       + split initially after the function return type and left align
-
       + do not put =const= onto its own line - use a split to keep it with
         the function name and arguments.
-
-     so
-
         #+BEGIN_EXAMPLE
         const Foam::longReturnTypeName&
         Foam::longClassName::longFunctionName const
         #+END_EXAMPLE
-
         NOT
-
         #+BEGIN_EXAMPLE
         const Foam::longReturnTypeName&
             Foam::longClassName::longFunctionName const
         #+END_EXAMPLE
-
         NOR
-
         #+BEGIN_EXAMPLE
         const Foam::longReturnTypeName& Foam::longClassName::longFunctionName
         const
         #+END_EXAMPLE
-
         NOR
-
         #+BEGIN_EXAMPLE
         const Foam::longReturnTypeName& Foam::longClassName::
         longFunctionName const
         #+END_EXAMPLE
-
       + if it needs to be split again, split at the function name (leaving
         behind the preceding scoping =::=s), and again, left align, i.e.
-
-     For example,
-
         #+BEGIN_EXAMPLE
         const Foam::longReturnTypeName&
         Foam::veryveryveryverylongClassName::
         veryveryveryverylongFunctionName const
         #+END_EXAMPLE
 
-**** Splitting long lines at an "="
+***** Splitting long lines at an "="
-
      Indent after split
-
      #+BEGIN_EXAMPLE
      variableName =
          longClassName.longFunctionName(longArgument);
      #+END_EXAMPLE
-
      OR (where necessary)
-
      #+BEGIN_EXAMPLE
      variableName =
          longClassName.longFunctionName
@@ -312,16 +256,12 @@
              longArgument2
          );
      #+END_EXAMPLE
-
      NOT
-
      #+BEGIN_EXAMPLE
      variableName =
      longClassName.longFunctionName(longArgument);
      #+END_EXAMPLE
-
      NOR
-
      #+BEGIN_EXAMPLE
      variableName = longClassName.longFunctionName
      (
@@ -332,7 +272,6 @@
 
 *** Maths and Logic
     + operator spacing
-
       #+BEGIN_EXAMPLE
       a + b, a - b
       a*b, a/b
@@ -347,21 +286,19 @@
       Split and indent as per "splitting long lines at an ="
       with the operator on the lower line.  Align operator so that first
       variable, function or bracket on the next line is 4 spaces indented i.e.
-
       #+BEGIN_EXAMPLE
       variableName =
           a*(a + b)
-      - exp(c/d)
+         *exp(c/d)
          *(k + t);
       #+END_EXAMPLE
-
       This is sometimes more legible when surrounded by extra parentheses:
 
       #+BEGIN_EXAMPLE
       variableName =
       (
           a*(a + b)
-      - exp(c/d)
+         *exp(c/d)
          *(k + t)
       );
       #+END_EXAMPLE
@@ -370,7 +307,6 @@
 
       outdent the operator so that the next variable to test is aligned with
       the four space indentation, i.e.
-
       #+BEGIN_EXAMPLE
       if
       (
@@ -380,9 +316,7 @@
       #+END_EXAMPLE
 
 ** Documentation
-
 *** General
-
     + For readability in the comment blocks, certain tags are used that are
       translated by pre-filtering the file before sending it to Doxygen.
 
@@ -397,7 +331,6 @@
       description.
 
       For example,
-
       #+BEGIN_EXAMPLE
       Class
           Foam::myClass
@@ -415,8 +348,6 @@
     + If you don't have anything to say about the class (at the moment), use
       the namespace-qualified class name for the description. This aids with
       finding these under-documented classes later.
-
-
       #+BEGIN_EXAMPLE
       Class
           Foam::myUnderDocumentedClass
@@ -425,14 +356,11 @@
           Foam::myUnderDocumentedClass
       #+END_EXAMPLE
 
-
     + Use 'Class' and 'Namespace' tags in the header files.
       The Description block then applies to documenting the class.
 
     + Use 'InClass' and 'InNamespace' in the source files.
       The Description block then applies to documenting the file itself.
-
-
       #+BEGIN_EXAMPLE
       InClass
           Foam::myClass
@@ -442,21 +370,10 @@
       #+END_EXAMPLE
 
 *** Doxygen Special Commands
+    Doxygen has a large number of special commands with a =\= prefix.
 
-    Doxygen has a large number of special commands with a =\= prefix or
+    Since the filtering removes the leading spaces within the blocks, the
-    (alternatively) an =@= prefix.
-
-    The =@= prefix form is recommended for most Doxygen specials, since it
-    has the advantage of standing out. It also happens to be what projects
-    like gcc and VTK are using.
-
-    The =\= prefix form, however, looks a bit better for the =\n= newline
-    command and when escaping single characters - eg, =\@=, =\<=, =\>=, etc.
-
-    Since the filtering removes the leading 4 spaces within the blocks, the
     Doxygen commmands can be inserted within the block without problems.
-
-
     #+BEGIN_EXAMPLE
     InClass
         Foam::myClass
@@ -465,48 +382,42 @@
         Implements the read and writing of files.
 
         An example input file:
-        @verbatim
+        \verbatim
             patchName
             {
                 type        myPatchType;
                 refValue    100;
                 value       uniform 1;
             }
-        @endverbatim
+        \endverbatim
 
         Within the implementation, a loop over all patches is done:
-        @code
+        \code
             forAll(patches, patchI)
             {
                 ...  // some operation
             }
-        @endcode
+        \endcode
     #+END_EXAMPLE
 
 *** HTML Special Commands
-
     Since Doxygen also handles HTML tags to a certain extent, the angle
     brackets need quoting in the documentation blocks. Non-HTML tags cause
     Doxygen to complain, but seem to work anyhow.
 
     eg,
     + The template with type =<HR>= is a bad example.
-
     + The template with type =\<HR\>= is a better example.
-
     + The template with type =<Type>= causes Doxygen to complain about an
       unknown html type, but it seems to work okay anyhow.
 
-
 *** Documenting Namespaces
-
     + If namespaces are explictly declared with the =Namespace()= macro,
       they should be documented there.
 
     + If the namespaces is used to hold sub-models, the namespace can be
       documented in the same file as the class with the model selector.
       eg,
-
       #+BEGIN_EXAMPLE
       documented namespace 'Foam::functionEntries' within the
       class 'Foam::functionEntry'
@@ -514,19 +425,14 @@
 
     + If nothing else helps, find some sensible header.
       eg,
-
       #+BEGIN_EXAMPLE
       namespace 'Foam' is documented in the foamVersion.H file
       #+END_EXAMPLE
 
-
 *** Documenting typedefs and classes defined via macros
-
     ... not yet properly resolved
 
-
 *** Documenting Applications
-
     Any number of classes might be defined by a particular application, but
     these classes will not, however, be available to other parts of
     OpenFOAM. At the moment, the sole purpuse for running Doxygen on the
@@ -542,20 +448,14 @@
     The layout of the application documentation has not yet been finalized,
     but foamToVTK shows an initial attempt.
 
-*** Orthography (an opinion)
+*** Orthography
-
+    Given the origins of OpenFOAM, the British spellings (eg, neighbour and not
-    Given the origins of OpenFOAM, the British spellings (eg, neighbour and
+    neighbor) are generally favoured.
-    not neighbor) are generally favoured. For code sections that interact
-    with external libraries, it can be useful to adopt American spellings,
-    especially for names that constitute a significant part of the external
-    library - eg, 'color' within graphics sub-systems.
 
     Both '-ize' and the '-ise' variant are found in the code comments. If
     used as a variable or class method name, it is probably better to use
     '-ize', which is considered the main form by the Oxford University
-    Press.
+    Press. Eg,
-
-    Eg,
     #+BEGIN_EXAMPLE
     myClass.initialize()
     #+END_EXAMPLE

doc/doxygen/Doxyfile

@@ -581,16 +581,16 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-#INPUT                  = $(WM_PROJECT_DIR)/src \
+INPUT                  = $(WM_PROJECT_DIR)/src \
-#                         $(WM_PROJECT_DIR)/applications/utilities \
+                         $(WM_PROJECT_DIR)/applications/utilities \
-#                         $(WM_PROJECT_DIR)/applications/solvers
+                         $(WM_PROJECT_DIR)/applications/solvers
 
 # limit input for testing purposes
-INPUT                  = $(WM_PROJECT_DIR)/src/OpenFOAM/global \
+# INPUT                  = $(WM_PROJECT_DIR)/src/OpenFOAM/global \
-                         $(WM_PROJECT_DIR)/src/OpenFOAM/containers \
+#                          $(WM_PROJECT_DIR)/src/OpenFOAM/containers \
-                         $(WM_PROJECT_DIR)/src/OpenFOAM/primitives \
+#                          $(WM_PROJECT_DIR)/src/OpenFOAM/primitives \
-                         $(WM_PROJECT_DIR)/sampling \
+#                          $(WM_PROJECT_DIR)/sampling \
-                         $(WM_PROJECT_DIR)/src/finiteVolume/fvMesh
+#                          $(WM_PROJECT_DIR)/src/finiteVolume/fvMesh
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

src/OSspecific/POSIX/regExp.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,7 +29,7 @@ Description
 
 SeeAlso
     The manpage regex(7) for more information about POSIX regular expressions.
-    These differ somewhat from @c Perl and @c sed regular expressions.
+    These differ somewhat from \c Perl and @c sed regular expressions.
 
 SourceFiles
     regExp.C

src/OSspecific/POSIX/signals/sigFpe.H

@@ -28,9 +28,9 @@ Description
     Set up trapping for floating point exceptions (signal FPE).
 
     Controlled by two env vars:
-    @param FOAM_SIGFPE \n
+    \param FOAM_SIGFPE \n
         exception trapping
-    @param FOAM_SETNAN \n
+    \param FOAM_SETNAN \n
         initialization of all malloced memory to NaN. If FOAM_SIGFPE
         also set, this will cause usage of uninitialized scalars to trigger
         an abort.

src/OSspecific/POSIX/timer.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -28,7 +28,7 @@ Description
     Implements a timeout mechanism via sigalarm.
 
     Example usage:
-    @code
+    \code
         timer myTimer(5);     // 5 sec
         ..
         if (timedOut(myTimer))
@@ -39,7 +39,7 @@ Description
         {
             // do something possible blocking
         }
-    @endcode
+    \endcode
 
     Constructor set signal handler on sigalarm and alarm(). Destructor
     clears these.

src/OpenFOAM/containers/Lists/List/List.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -236,10 +236,10 @@ public:
 
 //- Read a bracket-delimited list, or handle a single value as list of size 1.
 //  For example,
-//  @code
+//  \code
 //      wList = readList<word>(IStringStream("(patch1 patch2 patch3)")());
 //      wList = readList<word>(IStringStream("patch0")());
-//  @endcode
+//  \endcode
 //  Mostly useful for handling command-line arguments.
 template<class T>
 List<T> readList(Istream&);

src/OpenFOAM/containers/Lists/ListListOps/ListListOps.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -37,7 +37,7 @@ Description
     in one go, minimizing communication, and then picked apart and recombined.
 
     Example:
-    @code
+    \code
         // Assuming myContainer defined which holds all the data I want to
         // transfer (say a pointField and a faceList). myContainer also defines
         // access operators to
@@ -76,7 +76,7 @@ Description
                 gatheredData, sizes, myContainerFaces(), offsetOp<face>()
             )
         );
-    @endcode
+    \endcode
 
 SourceFiles
     ListListOps.C

src/OpenFOAM/containers/Lists/PackedList/PackedBoolList.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2010-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2010-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -54,7 +54,7 @@ namespace Foam
 // Forward declaration
 class PackedBoolList;
 
-//- @typedef A List of PackedBoolList
+//- \typedef A List of PackedBoolList
 typedef List<PackedBoolList> PackedBoolListList;
 
 /*---------------------------------------------------------------------------*\

src/OpenFOAM/containers/Lists/PackedList/PackedList.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -42,11 +42,11 @@ Note
 
     Using the iteratorBase as a proxy allows assignment of values
     between list elements. Thus the following bit of code works as expected:
-    @code
+    \code
         list[1] = list[5];      // value assignment, not iterator position
         list[2] = list[5] = 4;  // propagates value
         list[1] = list[5] = list[6];  // propagates value
-    @endcode
+    \endcode
 
     Using get() or the '[]' operator are similarly fast. Looping and reading
     via an iterator is approx. 15% slower, but can be more flexible.
@@ -56,21 +56,21 @@ Note
     advantage of also returning a bool if the value changed.  This can be
     useful for branching on changed values.
 
-    @code
+    \code
         list[5] = 4;
         changed = list.set(5, 8);
         if (changed) ...
-    @endcode
+    \endcode
 
     The lazy evaluation used means that reading an out-of-range element
     returns zero, but does not affect the list size.  Even in a non-const
     context, only the assigment itself causes the element to be created.
     For example,
-    @code
+    \code
         list.resize(4);
         Info<< list[10] << "\n";  // print zero, but doesn't adjust list
         list[8] = 1;
-    @endcode
+    \endcode
 
     Also note that all unused internal storage elements are guaranteed to
     always be bit-wise zero. This property must not be violated by any
@@ -79,14 +79,14 @@ Note
     In addition to the normal output format, PackedList also supports a
     compact ASCII format that may be convenient for user input in some
     situations. The general format is a group of index/value pairs:
-    @verbatim
+    \verbatim
         { (index1 value1) (index2 value2) (index3 value3) }
-    @endverbatim
+    \endverbatim
     The bool specialization just uses the indices corresponding to
     non-zero entries instead of a index/value pair:
-    @verbatim
+    \verbatim
         { index1 index2 index3 }
-    @endverbatim
+    \endverbatim
     In both cases, the supplied indices can be randomly ordered.
 
 SeeAlso
@@ -356,14 +356,14 @@ public:
             //
             // The indexed output may be convenient in some situations.
             // The general format is a group of index/value pairs:
-            //  @verbatim
+            //  \verbatim
             //      { (index1 value1) (index2 value2) (index3 value3) }
-            // @endverbatim
+            // \endverbatim
             // The bool specialization just uses the indices corresponding to
             // non-zero entries instead of a index/value pair:
-            // @verbatim
+            // \verbatim
             //     { index1 index2 index3 }
-            // @endverbatim
+            // \endverbatim
             //
             // Note the indexed output is only supported for ASCII streams.
             Ostream& write

src/OpenFOAM/containers/Lists/UList/UList.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -367,28 +367,28 @@ inline void reverse(UList<T>&);
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 /**
- * @def forAll(list, i)
+ * \def forAll(list, i)
- * Loop across all elements in @a list
+ * Loop across all elements in \a list
- * @par Usage
+ * \par Usage
- * @code
+ * \code
  * forAll(anyList, i)
  * {
  *      statements;
  * }
- * @endcode
+ * \endcode
- * @sa forAllReverse
+ * \sa forAllReverse
 */
 /**
- * @def forAllReverse(list, i)
+ * \def forAllReverse(list, i)
- * Reverse loop across all elements in @a list
+ * Reverse loop across all elements in \a list
- * @par Usage
+ * \par Usage
- * @code
+ * \code
  * forAllReverse(anyList, i)
  * {
  *      statements;
  * }
- * @endcode
+ * \endcode
- * @sa forAll
+ * \sa forAll
 */
 #define forAll(list, i) \
     for (Foam::label i=0; i<(list).size(); i++)
@@ -397,17 +397,17 @@ inline void reverse(UList<T>&);
     for (Foam::label i=(list).size()-1; i>=0; i--)
 
 /**
- * @def forAllIter(Container, container, iter)
+ * \def forAllIter(Container, container, iter)
- * Iterate across all elements in the @a container object of type
+ * Iterate across all elements in the \a container object of type
- * @a Container.
+ * \a Container.
- * @par Usage
+ * \par Usage
- * @code
+ * \code
  * forAll(ContainerType, container, iter)
  * {
  *     statements;
  * }
- * @endcode
+ * \endcode
- * @sa forAllConstIter
+ * \sa forAllConstIter
 */
 #define forAllIter(Container,container,iter)                                   \
     for                                                                        \
@@ -418,17 +418,17 @@ inline void reverse(UList<T>&);
     )
 
 /**
- * @def forAllConstIter(Container, container, iter)
+ * \def forAllConstIter(Container, container, iter)
- * Iterate across all elements in the @a container object of type
+ * Iterate across all elements in the \a container object of type
- * @a Container with const access.
+ * \a Container with const access.
- * @par Usage
+ * \par Usage
- * @code
+ * \code
  * forAllConstIter(ContainerType, container, iter)
  * {
  *     statements;
  * }
- * @endcode
+ * \endcode
- * @sa forAllIter
+ * \sa forAllIter
 */
 #define forAllConstIter(Container,container,iter)                              \
     for                                                                        \

src/OpenFOAM/db/IOobject/IOobject.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -33,32 +33,32 @@ Description
     path, a reference to a objectRegistry, and parameters determining its
     storage status.
 
-    @par Read options
+    \par Read options
 
     Define what is done on object construction and explicit reads:
-    @param MUST_READ
+    \param MUST_READ
         Object must be read from Istream on construction. \n
         Error if Istream does not exist or can't be read.
         Does not check timestamp or re-read.
-    @param MUST_READ_IF_MODIFIED
+    \param MUST_READ_IF_MODIFIED
         Object must be read from Istream on construction. \n
         Error if Istream does not exist or can't be read. If object is
         registered its timestamp will be checked every timestep and possibly
         re-read.
-    @param READ_IF_PRESENT
+    \param READ_IF_PRESENT
         Read object from Istream if Istream exists, otherwise don't. \n
         Error only if Istream exists but can't be read.
         Does not check timestamp or re-read.
-    @param NO_READ
+    \param NO_READ
           Don't read
 
-    @par Write options
+    \par Write options
 
     Define what is done on object destruction and explicit writes:
-    @param AUTO_WRITE
+    \param AUTO_WRITE
         Object is written automatically when requested to by the
         objectRegistry.
-    @param NO_WRITE
+    \param NO_WRITE
         No automatic write on destruction but can be written explicitly
 
 SourceFiles

src/OpenFOAM/db/Time/Time.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -393,39 +393,39 @@ public:
             //- Return true if run should continue,
             //  also invokes the functionObjectList::end() method
             //  when the time goes out of range
-            //  @note
+            //  \note
             //  For correct behaviour, the following style of time-loop
             //  is recommended:
-            //  @code
+            //  \code
             //      while (runTime.run())
             //      {
             //          runTime++;
             //          solve;
             //          runTime.write();
             //      }
-            //  @endcode
+            //  \endcode
             virtual bool run() const;
 
             //- Return true if run should continue and if so increment time
             //  also invokes the functionObjectList::end() method
             //  when the time goes out of range
-            //  @note
+            //  \note
             //  For correct behaviour, the following style of time-loop
             //  is recommended:
-            //  @code
+            //  \code
             //      while (runTime.loop())
             //      {
             //          solve;
             //          runTime.write();
             //      }
-            //  @endcode
+            //  \endcode
             virtual bool loop();
 
             //- Return true if end of run,
             //  does not invoke any functionObject methods
-            //  @note
+            //  \note
             //      The rounding heuristics near endTime mean that
-            //      @code run() @endcode and @code !end() @endcode may
+            //      \code run() \endcode and \code !end() \endcode may
             //      not yield the same result
             virtual bool end() const;
 

src/OpenFOAM/db/Time/timeSelector.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,7 +30,7 @@ Description
     The timeSelector provides a convenient means of selecting multiple
     times. A typical use would be the following:
 
-    @verbatim
+    \verbatim
     timeSelector::addOptions();
     // add other options
     #include "setRootCase.H"
@@ -41,27 +41,27 @@ Description
     {
         ...
     }
-    @endverbatim
+    \endverbatim
 
-    The result program would receive @b -time, @b -latestTime, @b -constant
+    The result program would receive \b -time, @b -latestTime, @b -constant
-    and @b -noZero options. The @b -constant option explicitly includes the
+    and \b -noZero options. The @b -constant option explicitly includes the
-    @c constant/ directory in the time list and the @b -noZero option
+    \c constant/ directory in the time list and the \b -noZero option
-    explicitly excludes the @c 0/ directory from the time list.
+    explicitly excludes the \c 0/ directory from the time list.
 
-    There may however also be many cases in which neither the @c constant/
+    There may however also be many cases in which neither the \c constant/
-    directory nor the @c 0/ directory contain particularly relevant
+    directory nor the \c 0/ directory contain particularly relevant
     information. This might occur, for example, when post-processing
     results. In this case, addOptions is called with optional boolean
     arguments.
 
-    @verbatim
+    \verbatim
     timeSelector::addOptions(false, true);
-    @endverbatim
+    \endverbatim
 
-    The first argument avoids adding the @b -constant option. The second
+    The first argument avoids adding the \b -constant option. The second
-    argument adds an additional @b -zeroTime option and also prevents the
+    argument adds an additional \b -zeroTime option and also prevents the
-    @c 0/ directory from being included in the default time range and in the
+    \c 0/ directory from being included in the default time range and in the
-    @b -latestTime selection.
+    \b -latestTime selection.
 
 SourceFiles
     timeSelector.C
@@ -119,15 +119,15 @@ public:
 
         //- Add the options handled by timeSelector to argList::validOptions
         //
-        // @param constant
+        // \param constant
-        //   Add the @b -constant option to include the @c constant/ directory
+        //   Add the \b -constant option to include the \c constant/ directory
         //
-        // @param zeroTime
+        // \param zeroTime
-        //   Enable the @b -zeroTime option and alter the normal time selection
+        //   Enable the \b -zeroTime option and alter the normal time selection
-        //   behaviour (and @b -latestTime behaviour) to exclude the @c 0/
+        //   behaviour (and \b -latestTime behaviour) to exclude the \c 0/
-        //   directory. The @c 0/ directory will only be included when
+        //   directory. The \c 0/ directory will only be included when
-        //   @b -zeroTime is specified.
+        //   \b -zeroTime is specified.
-        //   The @b -noZero option has precedence over the @b -zeroTime option.
+        //   The \b -noZero option has precedence over the @b -zeroTime option.
         static void addOptions
         (
             const bool constant=true,

src/OpenFOAM/db/dictionary/functionEntries/functionEntry/functionEntry.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -35,7 +35,7 @@ Description
     A functionEntry causes entries to be added/manipulated on the specified
     dictionary given an input stream.
 
-    In dictionaries, a @c '\#' sigil is typically used for a functionEntry.
+    In dictionaries, a \c '\#' sigil is typically used for a functionEntry.
 
 SourceFiles
     functionEntry.C

src/OpenFOAM/db/dictionary/functionEntries/includeEntry/includeEntry.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -28,13 +28,13 @@ Description
     Specify an include file when reading dictionaries, expects a
     single string to follow.
 
-    An example of the @c \#include directive:
+    An example of the \c \#include directive:
-    @verbatim
+    \verbatim
         #include "includeFile"
-    @endverbatim
+    \endverbatim
 
     The usual expansion of environment variables and other constructs
-    (eg, the @c ~OpenFOAM/ expansion) is retained.
+    (eg, the \c ~OpenFOAM/ expansion) is retained.
 
 See Also
     fileName, string::expand()

src/OpenFOAM/db/dictionary/functionEntries/includeIfPresentEntry/includeIfPresentEntry.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,7 +27,7 @@ Class
 Description
     Specify a file to include if it exists. Expects a single string to follow.
 
-    The @c \#includeIfPresent directive is similar to the @c \#include
+    The \c \#includeIfPresent directive is similar to the @c \#include
     directive, but does not generate an error if the file does not exist.
 
 See Also

src/OpenFOAM/db/dictionary/functionEntries/inputModeEntry/inputModeEntry.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -28,18 +28,18 @@ Description
     Specify the input mode when reading dictionaries, expects
     a single word to follow.
 
-    An example of @c \#inputMode directive:
+    An example of \c \#inputMode directive:
-    @verbatim
+    \verbatim
         #inputMode merge
-    @endverbatim
+    \endverbatim
 
     The possible input modes:
-    @param merge      merge sub-dictionaries when possible
+    \param merge      merge sub-dictionaries when possible
-    @param overwrite  keep last entry and silently remove previous ones
+    \param overwrite  keep last entry and silently remove previous ones
-    @param protect    keep initial entry and silently ignore subsequent ones
+    \param protect    keep initial entry and silently ignore subsequent ones
-    @param warn       keep initial entry and warn about subsequent ones
+    \param warn       keep initial entry and warn about subsequent ones
-    @param error      issue a FatalError for duplicate entries
+    \param error      issue a FatalError for duplicate entries
-    @param default    currently identical to merge
+    \param default    currently identical to merge
 
 SourceFiles
     inputModeEntry.C

src/OpenFOAM/db/dictionary/functionEntries/removeEntry/removeEntry.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -27,14 +27,14 @@ Class
 Description
     Remove a dictionary entry.
 
-    The @c \#remove directive takes a list or a single wordRe.
+    The \c \#remove directive takes a list or a single wordRe.
     For example,
-    @verbatim
+    \verbatim
         #remove entry0
         #remove ( entry1 entry2 entry3 otherEntry )
         #remove "entry[1-3]"
         #remove ( "entry[1-3]" otherEntry )
-    @endverbatim
+    \endverbatim
 
     The removal only occurs in the current context.
     Removing sub-entries or parent entries is not supported.

src/OpenFOAM/db/error/StaticAssert.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2008-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2008-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -72,7 +72,7 @@ class StaticAssertionTest {};
 // external use:
 // ~~~~~~~~~~~~~
 /**
- * @def StaticAssert(Test)
+ * \def StaticAssert(Test)
  * Assert that some test is true at compile-time
 */
 #define StaticAssert(Test)                                                   \

src/OpenFOAM/db/error/error.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -35,10 +35,10 @@ Description
     handling has beed switched on (off by default).
 
 Usage
-    @code
+    \code
         error << "message1" << "message2" << FoamDataType << exit(errNo);
         error << "message1" << "message2" << FoamDataType << abort();
-    @endcode
+    \endcode
 
 SourceFiles
     error.C
@@ -296,7 +296,7 @@ extern IOerror FatalIOError;
 // Convenience macros to add the file name and line number to the function name
 
 /**
- * @def FatalErrorIn(functionName)
+ * \def FatalErrorIn(functionName)
  * Report an error message using Foam::FatalError for functionName in
  * file __FILE__ at line __LINE__
 */
@@ -304,7 +304,7 @@ extern IOerror FatalIOError;
     ::Foam::FatalError((fn), __FILE__, __LINE__)
 
 /**
- * @def FatalIOErrorIn(functionName, ios)
+ * \def FatalIOErrorIn(functionName, ios)
  * Report an error message using Foam::FatalIOError for functionName in
  * file __FILE__ at line __LINE__
  * for a particular IOstream
@@ -313,12 +313,12 @@ extern IOerror FatalIOError;
     ::Foam::FatalIOError((fn), __FILE__, __LINE__, (ios))
 
 /**
- * @def notImplemented(functionName)
+ * \def notImplemented(functionName)
  * Issue a FatalErrorIn for the functionName.
  * This is used for functions that are not currently implemented.
  * The functionName is printed and then abort is called.
  *
- * @note
+ * \note
  * This macro can be particularly useful when methods must be defined to
  * complete the interface of a derived class even if they should never be
  * called for this derived class.

src/OpenFOAM/db/error/errorManip.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,10 +30,10 @@ Description
     handling has been switched on (off by default).
 
 Usage
-    @code
+    \code
         error << "message1" << "message2" << FoamDataType << exit(error, errNo);
         error << "message1" << "message2" << FoamDataType << abort(error);
-    @endcode
+    \endcode
 
 \*---------------------------------------------------------------------------*/
 

src/OpenFOAM/db/error/messageStream.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -34,10 +34,10 @@ Description
     the messageStream class in the standard manner.
 
 Usage
-    @code
+    \code
         messageStream
             << "message1" << "message2" << FoamDataType << endl;
-    @endcode
+    \endcode
 
 SourceFiles
     messageStream.C
@@ -214,7 +214,7 @@ extern messageStream Info;
 // Convenience macros to add the file name and line number to the function name
 
 /**
- * @def SeriousErrorIn(functionName)
+ * \def SeriousErrorIn(functionName)
  * Report an error message using Foam::SeriousError for functionName in
  * file __FILE__ at line __LINE__
 */
@@ -222,7 +222,7 @@ extern messageStream Info;
     ::Foam::SeriousError((fn), __FILE__, __LINE__)
 
 /**
- * @def SeriousIOErrorIn(functionName, ios)
+ * \def SeriousIOErrorIn(functionName, ios)
  * Report an IO error message using Foam::SeriousError for functionName in
  * file __FILE__ at line __LINE__
  * for a particular IOstream
@@ -231,7 +231,7 @@ extern messageStream Info;
     ::Foam::SeriousError((fn), __FILE__, __LINE__, ios)
 
 /**
- * @def WarningIn(functionName)
+ * \def WarningIn(functionName)
  * Report a warning using Foam::Warning for functionName in
  * file __FILE__ at line __LINE__
 */
@@ -239,7 +239,7 @@ extern messageStream Info;
     ::Foam::Warning((fn), __FILE__, __LINE__)
 
 /**
- * @def IOWarningIn(functionName, ios)
+ * \def IOWarningIn(functionName, ios)
  * Report an IO warning using Foam::Warning for functionName in
  * file __FILE__ at line __LINE__
  * for a particular IOstream
@@ -248,7 +248,7 @@ extern messageStream Info;
     ::Foam::Warning((fn), __FILE__, __LINE__, (ios))
 
 /**
- * @def InfoIn(functionName)
+ * \def InfoIn(functionName)
  * Report a information message using Foam::Info for functionName in
  * file __FILE__ at line __LINE__
 */
@@ -256,7 +256,7 @@ extern messageStream Info;
     ::Foam::Info((fn), __FILE__, __LINE__)
 
 /**
- * @def IOInfoIn(functionName, ios)
+ * \def IOInfoIn(functionName, ios)
  * Report an IO information message using Foam::Info for functionName in
  * file __FILE__ at line __LINE__
  * for a particular IOstream

src/OpenFOAM/db/functionObjects/OutputFilterFunctionObject/OutputFilterFunctionObject.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,9 +30,9 @@ Description
 
 Note
     Since the timeIndex is used directly from Foam::Time, it is unaffected
-    by user-time conversions. For example, Foam::engineTime might cause @a
+    by user-time conversions. For example, Foam::engineTime might cause \a
     writeInterval to be degrees crank angle, but the functionObject
-    execution @a interval would still be in timestep.
+    execution \a interval would still be in timestep.
 
 SourceFiles
     OutputFilterFunctionObject.C

src/OpenFOAM/db/functionObjects/functionObjectList/functionObjectList.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -108,7 +108,7 @@ public:
 
         //- Construct from Time, a dictionary with "functions" entry
         //  and the execution setting.
-        //  @param[in]  parentDict - the parent dictionary containing
+        //  \param[in]  parentDict - the parent dictionary containing
         //    a "functions" entry, which can either be a list or a dictionary
         //    of functionObject specifications.
         functionObjectList

src/OpenFOAM/db/functionObjects/outputFilterOutputControl/outputFilterOutputControl.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -74,7 +74,7 @@ private:
         //- Type of output
         outputControls outputControl_;
 
-        //- The execution interval (in time steps) when using @c timeStep mode,
+        //- The execution interval (in time steps) when using \c timeStep mode,
         //  a value <= 1 means execute at every time step
         label outputInterval_;
 

src/OpenFOAM/db/typeInfo/className.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -39,19 +39,19 @@ Description
 // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
-//- Add typeName information from argument @a TypeNameString to a class.
+//- Add typeName information from argument \a TypeNameString to a class.
 //  Without debug information
 #define ClassNameNoDebug(TypeNameString)                                      \
     static const char* typeName_() { return TypeNameString; }                 \
     static const ::Foam::word typeName
 
-//- Add typeName information from argument @a TypeNameString to a namespace.
+//- Add typeName information from argument \a TypeNameString to a namespace.
 //  Without debug information.
 #define NamespaceNameNoDebug(TypeNameString)                                  \
     inline const char* typeName_() { return TypeNameString; }                 \
     extern const ::Foam::word typeName
 
-//- Add typeName information from argument @a TemplateNameString to a
+//- Add typeName information from argument \a TemplateNameString to a
 //  template class.  Without debug information.
 #define TemplateNameNoDebug(TemplateNameString)                               \
 class TemplateNameString##Name                                                \
@@ -68,19 +68,19 @@ public:                                                                       \
 // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
-//- Add typeName information from argument @a TypeNameString to a class.
+//- Add typeName information from argument \a TypeNameString to a class.
 //  Also declares debug information.
 #define ClassName(TypeNameString)                                             \
     ClassNameNoDebug(TypeNameString);                                         \
     static int debug
 
-//- Add typeName information from argument @a TypeNameString to a namespace.
+//- Add typeName information from argument \a TypeNameString to a namespace.
 //  Also declares debug information.
 #define NamespaceName(TypeNameString)                                         \
     NamespaceNameNoDebug(TypeNameString);                                     \
     extern int debug
 
-//- Add typeName information from argument @a TypeNameString to a
+//- Add typeName information from argument \a TypeNameString to a
 //  template class.  Also declares debug information.
 #define TemplateName(TemplateNameString)                                      \
 class TemplateNameString##Name                                                \
@@ -97,7 +97,7 @@ public:                                                                       \
 // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
-//- Define the typeName, with alternative lookup as @a Name
+//- Define the typeName, with alternative lookup as \a Name
 #define defineTypeNameWithName(Type, Name)                                    \
     const ::Foam::word Type::typeName(Name)
 
@@ -106,18 +106,18 @@ public:                                                                       \
     defineTypeNameWithName(Type, Type::typeName_())
 
 #ifdef __INTEL_COMPILER
-//- Define the typeName as @a Name for template classes
+//- Define the typeName as \a Name for template classes
 # define defineTemplateTypeNameWithName(Type, Name)                           \
     defineTypeNameWithName(Type, Name)
-//- Define the typeName as @a Name for template sub-classes
+//- Define the typeName as \a Name for template sub-classes
 # define defineTemplate2TypeNameWithName(Type, Name)                          \
     defineTypeNameWithName(Type, Name)
 #else
-//- Define the typeName as @a Name for template classes
+//- Define the typeName as \a Name for template classes
 # define defineTemplateTypeNameWithName(Type, Name)                           \
     template<>                                                                \
     defineTypeNameWithName(Type, Name)
-//- Define the typeName as @a Name for template sub-classes
+//- Define the typeName as \a Name for template sub-classes
 # define defineTemplate2TypeNameWithName(Type, Name)                          \
     template<>                                                                \
     template<>                                                                \
@@ -139,7 +139,7 @@ public:                                                                       \
 // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
-//- Define the debug information, lookup as @a Name
+//- Define the debug information, lookup as \a Name
 #define defineDebugSwitchWithName(Type, Name, DebugSwitch)                    \
     int Type::debug(::Foam::debug::debugSwitch(Name, DebugSwitch))
 
@@ -148,18 +148,18 @@ public:                                                                       \
     defineDebugSwitchWithName(Type, Type::typeName_(), DebugSwitch)
 
 #ifdef __INTEL_COMPILER
-//- Define the debug information for templates, lookup as @a Name
+//- Define the debug information for templates, lookup as \a Name
 # define defineTemplateDebugSwitchWithName(Type, Name, DebugSwitch)           \
     defineDebugSwitchWithName(Type, Name, DebugSwitch)
-//- Define the debug information for templates sub-classes, lookup as @a Name
+//- Define the debug information for templates sub-classes, lookup as \a Name
 # define defineTemplate2DebugSwitchWithName(Type, Name, DebugSwitch)          \
     defineDebugSwitchWithName(Type, Name, DebugSwitch)
 #else
-//- Define the debug information for templates, lookup as @a Name
+//- Define the debug information for templates, lookup as \a Name
 # define defineTemplateDebugSwitchWithName(Type, Name, DebugSwitch)           \
     template<>                                                                \
     defineDebugSwitchWithName(Type, Name, DebugSwitch)
-//- Define the debug information for templates sub-classes, lookup as @a Name
+//- Define the debug information for templates sub-classes, lookup as \a Name
 # define defineTemplate2DebugSwitchWithName(Type, Name, DebugSwitch)          \
     template<>                                                                \
     template<>                                                                \
@@ -199,7 +199,7 @@ public:                                                                       \
     defineTypeName(Type);                                                     \
     defineDebugSwitch(Type, DebugSwitch)
 
-//- Define the typeName and debug information, lookup as @a Name
+//- Define the typeName and debug information, lookup as \a Name
 #define defineTemplateTypeNameAndDebugWithName(Type, Name, DebugSwitch)       \
     defineTemplateTypeNameWithName(Type, Name);                               \
     defineTemplateDebugSwitchWithName(Type, Name, DebugSwitch)
@@ -216,7 +216,7 @@ public:                                                                       \
 
 // for templated sub-classes
 
-//- Define the typeName and debug information, lookup as @a Name
+//- Define the typeName and debug information, lookup as \a Name
 #define defineTemplate2TypeNameAndDebugWithName(Type, Name, DebugSwitch)      \
     defineTemplate2TypeNameWithName(Type, Name);                              \
     defineTemplate2DebugSwitchWithName(Type, Name, DebugSwitch)

src/OpenFOAM/db/typeInfo/typeInfo.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,22 +29,22 @@ Description
     Used to enhance the standard RTTI to cover I/O.
 
     The user can get the type's type name using the type info access function
-    @code
+    \code
         type()
-    @endcode
+    \endcode
 
     The reference type cast template function:
-    @code
+    \code
         refCast<T>(r)
-    @endcode
+    \endcode
 
     wraps dynamic_cast to handle the bad_cast exception and generate a
     FatalError.
 
     The isA function:
-    @code
+    \code
         isA<T>(r)
-    @endcode
+    \endcode
 
     returns true if r is of type T or derived from type T.
 

src/OpenFOAM/global/argList/argList.H

@@ -26,38 +26,38 @@ Class
 
 Description
     Extract command arguments and options from the supplied
-    @a argc and @a argv parameters.
+    \a argc and @a argv parameters.
 
     Sequences with "(" ... ")" are transformed into a stringList.
     For example,
-    @verbatim
+    \verbatim
         program -listFiles \( *.txt \)
-    @endverbatim
+    \endverbatim
     would create a stringList:
-    @verbatim
+    \verbatim
         ( "file1.txt" "file2.txt" ... "fileN.txt" )
-    @endverbatim
+    \endverbatim
     The backslash-escaping is required to avoid interpretation by the shell.
 
-    @par Default command-line options
+    \par Default command-line options
-    @param -case \<dir\> \n
+    \param -case \<dir\> \n
         select an case directory instead of the current working directory
-    @param -parallel \n
+    \param -parallel \n
         specify case as a parallel job
-    @param -doc \n
+    \param -doc \n
         display the documentation in browser
-    @param -srcDoc \n
+    \param -srcDoc \n
         display the source documentation in browser
-    @param -help \n
+    \param -help \n
        print the usage
 
-    The environment variable @b FOAM_CASE is set to the path of the
+    The environment variable \b FOAM_CASE is set to the path of the
     global case (same for serial and parallel jobs).
-    The environment variable @b FOAM_CASENAME is set to the name of the
+    The environment variable \b FOAM_CASENAME is set to the name of the
     global case.
 
 Note
-    - The document browser used is defined by the @b FOAM_DOC_BROWSER
+    - The document browser used is defined by the \b FOAM_DOC_BROWSER
       environment variable or the <tt>Documentation/docBrowser</tt> entry
       in the <tt>~OpenFOAM/controlDict</tt> file.
       The \%f token is used as a placeholder for the file name.
@@ -168,14 +168,14 @@ public:
         //- Max screen width for displaying usage (default: 80)
         static string::size_type usageMax;
 
-        //! @cond internalClass
+        //! \cond internalClass
         class initValidTables
         {
         public:
 
             initValidTables();
         };
-        //! @endcond
+        //! \endcond
 
 
     // Constructors
@@ -230,7 +230,7 @@ public:
             inline T argRead(const label index) const;
 
             //- Return arguments that are additional to the executable
-            //  @deprecated use operator[] directly (deprecated Feb 2010)
+            //  \deprecated use operator[] directly (deprecated Feb 2010)
             stringList::subList additionalArgs() const
             {
                 return stringList::subList(args_, args_.size()-1, 1);
@@ -292,7 +292,7 @@ public:
             inline const string& operator[](const label index) const;
 
             //- Return the argument string associated with the named option
-            //  @sa option()
+            //  \sa option()
             inline const string& operator[](const word& opt) const;
 
         // Edit

src/OpenFOAM/global/debug/debug.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -38,7 +38,7 @@ namespace Foam
 namespace debug
 {
 
-//! @cond ignoreDocumentation - local scope
+//! \cond ignoreDocumentation - local scope
 dictionary* controlDictPtr_(NULL);
 dictionary* debugSwitchesPtr_(NULL);
 dictionary* infoSwitchesPtr_(NULL);
@@ -63,7 +63,7 @@ public:
 };
 
 deleteControlDictPtr deleteControlDictPtr_;
-//! @endcond
+//! \endcond
 
 
 } // End namespace debug

src/OpenFOAM/global/debug/debug.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -49,7 +49,7 @@ namespace debug
 {
     //- The central control dictionary.
     //  Located in ~/.OpenFOAM/VERSION or $WM_PROJECT_DIR/etc
-    //  @sa Foam::findEtcFile()
+    //  \sa Foam::findEtcFile()
     dictionary& controlDict();
 
     //- The DebugSwitches sub-dictionary in the central controlDict.

src/OpenFOAM/graph/writers/xmgrGraph/xmgrGraph.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -25,7 +25,7 @@ Class
     Foam::xmgrGraph
 
 Description
-    Output and @b agr file for @em xmgrace
+    Output and \b agr file for \em xmgrace
     (http://plasma-gate.weizmann.ac.il/Grace/)
 
 SourceFiles

src/OpenFOAM/include/OSspecific.H

@@ -90,7 +90,7 @@ fileName cwd();
 //  else return false
 bool chDir(const fileName& dir);
 
-//- Search for @em name
+//- Search for \em name
 //  in the following hierarchy:
 //  -# personal settings:
 //    - ~/.OpenFOAM/\<VERSION\>/
@@ -105,7 +105,7 @@ bool chDir(const fileName& dir);
 //  -# shipped settings:
 //    - $WM_PROJECT_DIR/etc/
 //
-//  @return the full path name or fileName() if the name cannot be found
+//  \return the full path name or fileName() if the name cannot be found
 //  Optionally abort if the file cannot be found
 fileName findEtcFile(const fileName&, bool mandatory=false);
 

src/OpenFOAM/interpolations/interpolationTable/interpolationTable.H

@@ -29,9 +29,9 @@ Description
     The reference scalar values must be monotonically increasing.
 
     The handling of out-of-bounds values depends on the current setting
-    of @a outOfBounds.
+    of \a outOfBounds.
 
-    If @a REPEAT is chosen for the out-of-bounds handling, the final time
+    If \a REPEAT is chosen for the out-of-bounds handling, the final time
     value is treated as being equivalent to time=0 for the following periods.
 
 Note

src/OpenFOAM/interpolations/uniformInterpolationTable/uniformInterpolationTable.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2009-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2009-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -30,7 +30,7 @@ Description
 
     Example usage (scalar): values specified within a dictionary:
 
-    @verbatim
+    \verbatim
     {
         x0          0;          // lower limit
         dx          0.2;        // fixed interval
@@ -43,7 +43,7 @@ Description
             7870                // value at x0 + n*dx
         );
     }
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     uniformInterpolationTable.C

src/OpenFOAM/matrices/lduMatrix/lduAddressing/lduAddressing.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -38,7 +38,7 @@ Description
     the same point. The neighbour labels are also ordered in ascending
     order but only for groups of edges belonging to each point. An example
     is given below:
-    @verbatim
+    \verbatim
         owner     eighbour
         0         1
         0         20
@@ -60,7 +60,7 @@ Description
         8         28
         9         10
         9         29
-    @endverbatim
+    \endverbatim
 
     There exists an alternative way of addressing the owner
     list: instead of repeating the same label in the owner list, it is
@@ -68,9 +68,9 @@ Description
     neighbour list. This reduces the size of owner addressing from a list
     over all edges to a list over all points + 1:
 
-    @verbatim
+    \verbatim
         Owner start list: 0 2 4 6 8 10 12 14 16 18
-    @endverbatim
+    \endverbatim
 
     We shall use the second form of the addressing for fast lookup
     of edge label from the known owner and neighbour, using the following

src/OpenFOAM/matrices/solution/solution.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -36,12 +36,12 @@ License
 int Foam::solution::debug(::Foam::debug::debugSwitch("solution", 0));
 
 // List of sub-dictionaries to rewrite
-//! @cond localScope
+//! \cond localScope
 static const Foam::List<Foam::word> subDictNames
 (
     Foam::IStringStream("(preconditioner smoother)")()
 );
-//! @endcond
+//! \endcond
 
 
 // * * * * * * * * * * * * Private Member Functions  * * * * * * * * * * * * //

src/OpenFOAM/memory/Xfer/Xfer.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -43,21 +43,21 @@ Description
     memory becoming inaccessible, the xferMoveTo() function should be used to
     invoke the correct List\<T\>::transfer(DynamicList\<T\>&) method.
 
-    @code
+    \code
         DynamicList<label> dynLst;
         ...
         labelList plainLst( xferMoveTo<labelList>(dynLst) );
-    @endcode
+    \endcode
 
     Of course, since this example is a very common operation, the
     DynamicList::xfer() method transfers to a plain List anyhow.
     It would thus be simpler (and clearer) just to use the following code:
 
-    @code
+    \code
         DynamicList<label> dynLst;
         ...
         labelList plainLst(dynLst.xfer());
-    @endcode
+    \endcode
 
 SeeAlso
     xferCopy, xferCopyTo, xferMove, xferMoveTo, xferTmp
@@ -135,53 +135,53 @@ public:
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
 /**
- * Construct by copying the contents of the @a arg
+ * Construct by copying the contents of the \a arg
  *
- * @sa xferCopyTo, xferMove, xferMoveTo, xferTmp and Foam::Xfer
+ * \sa xferCopyTo, xferMove, xferMoveTo, xferTmp and Foam::Xfer
 */
 template<class T>
 inline Xfer<T> xferCopy(const T&);
 
 /**
- * Construct by transferring the contents of the @a arg
+ * Construct by transferring the contents of the \a arg
  *
- * @sa xferCopy, xferCopyTo, xferMoveTo, xferTmp and Foam::Xfer
+ * \sa xferCopy, xferCopyTo, xferMoveTo, xferTmp and Foam::Xfer
 */
 template<class T>
 inline Xfer<T> xferMove(T&);
 
 
 /**
- * Construct by transferring the contents of the @a arg
+ * Construct by transferring the contents of the \a arg
  *
- * @sa xferCopy, xferCopyTo, xferMove, xferMoveTo and Foam::Xfer
+ * \sa xferCopy, xferCopyTo, xferMove, xferMoveTo and Foam::Xfer
 */
 template<class T>
 inline Xfer<T> xferTmp(Foam::tmp<T>&);
 
 
 /**
- * Construct by copying the contents of the @a arg
+ * Construct by copying the contents of the \a arg
  * between dissimilar types
  *
- * @sa xferCopy, xferMove, xferMoveTo, xferTmp and Foam::Xfer
+ * \sa xferCopy, xferMove, xferMoveTo, xferTmp and Foam::Xfer
 */
 template<class To, class From>
 inline Xfer<To> xferCopyTo(const From&);
 
 
 /**
- * Construct by transferring the contents of the @a arg
+ * Construct by transferring the contents of the \a arg
  * between dissimilar types
  *
- * @par Example Use
+ * \par Example Use
- * @code
+ * \code
  *     DynamicList<label> dynLst;
  *     ...
  *     labelList plainLst( xferMoveTo<labelList>(dynLst) );
- * @endcode
+ * \endcode
  *
- * @sa xferCopy, xferCopyTo, xferMove, xferTmp and Foam::Xfer
+ * \sa xferCopy, xferCopyTo, xferMove, xferTmp and Foam::Xfer
 */
 template<class To, class From>
 inline Xfer<To> xferMoveTo(From&);

src/OpenFOAM/meshes/meshShapes/cellMatcher/cellMatcher.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -31,22 +31,22 @@ Description
     cell-face to mesh-face mapping.
 
     For example,
-    @verbatim
+    \verbatim
         hexMatcher hex(mesh);
         cellShape shape;
         ..
         bool isHex = hex.match(cellI, shape);
-    @endverbatim
+    \endverbatim
-    Now shape is set to the correct Hex cellShape (if @a isHex is true)
+    Now shape is set to the correct Hex cellShape (if \a isHex is true)
 
     Alternatively there is direct access to the vertex and face mapping:
-    @verbatim
+    \verbatim
         const labelList& hexVertLabels = hex.vertLabels();
         const labelList& hexFaceLabels = hex.faceLabels();
-    @endverbatim
+    \endverbatim
     Now
-      - @c hexVertLabels[n] is vertex label of hex vertex n
+      - \c hexVertLabels[n] is vertex label of hex vertex n
-      - @c hexFaceLabels[n] is face   label of hex vertex n
+      - \c hexFaceLabels[n] is face   label of hex vertex n
 
     Process of cellShape recognition consists of following steps:
     - renumber vertices of cell to local vertex numbers

src/OpenFOAM/meshes/polyMesh/globalMeshData/globalPoints.H

@@ -41,9 +41,9 @@ Description
     Works by constructing equivalence lists for all the points on processor
     patches. These list are in globalIndexAndTransform numbering
     E.g.
-    @verbatim
+    \verbatim
           ((7 93)(4 731)(3 114))
-    @endverbatim
+    \endverbatim
 
     means point 93 on proc7 is connected to point 731 on proc4 and 114 on proc3.
     It then assigns the lowest numbered processor to be the local 'master' and

src/OpenFOAM/meshes/polyMesh/mapPolyMesh/mapPolyMesh.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -49,7 +49,7 @@ Description
 
     All this information is nessecary to correctly map fields.
 
-    @par points
+    \par points
 
     - unchanged:
         - pointMap[pointI] contains old point label
@@ -66,7 +66,7 @@ Description
     - appended:
         - pointMap[pointI] contains -1
 
-    @par faces
+    \par faces
 
     - unchanged:
         - faceMap[faceI] contains old face label
@@ -98,7 +98,7 @@ Description
        only be boundary faces; if the new face is an internal face they
        will only be internal faces.
 
-    @par cells
+    \par cells
 
     - unchanged:
         - cellMap[cellI] contains old cell label

src/OpenFOAM/meshes/primitiveMesh/PatchTools/PatchTools.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -115,9 +115,9 @@ public:
 
     //- Determine the mapping for a sub-patch.
     //  Only include faces for which bool-list entry is true.
-    //  @param[in]  includeFaces faces to include
+    //  \param[in]  includeFaces faces to include
-    //  @param[out] pointMap mapping new to old localPoints
+    //  \param[out] pointMap mapping new to old localPoints
-    //  @param[out] faceMap  mapping new to old faces
+    //  \param[out] faceMap  mapping new to old faces
     template
     <
         class BoolListType,

src/OpenFOAM/primitives/functions/DataEntry/Constant/Constant.H

@@ -28,9 +28,9 @@ Description
     Templated basic entry that holds a constant value.
 
     Usage - for entry \<entryName\> having the value <value>:
-    @verbatim
+    \verbatim
         <entryName>    constant  <value>
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     Constant.C

src/OpenFOAM/primitives/functions/DataEntry/Table/Table.H

@@ -29,13 +29,13 @@ Description
     Tuple2's. First column is always stored as scalar entries. Data is read
     in the form, e.g. for an entry \<entryName\> that is (scalar, vector):
 
-    @verbatim
+    \verbatim
         <entryName>   table
         (
             0.0 (1 2 3)
             1.0 (4 5 6)
         );
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     Table.C

src/OpenFOAM/primitives/functions/DataEntry/polynomial/polynomial.H

@@ -29,13 +29,13 @@ Description
     Tuple2's. Data is input in the form, e.g. for an entry \<entryName\> that
     describes y = x^2 + 2x^3
 
-    @verbatim
+    \verbatim
         <entryName>   polynomial
         (
             (1    2)
             (2    3)
         );
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     polynomial.C

src/OpenFOAM/primitives/hashes/Hasher/Hasher.H

@@ -54,9 +54,9 @@ namespace Foam
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
     //- Bob Jenkins's 96-bit mixer hashing function (lookup3)
-    //  @param[in] data - a character stream
+    //  \param[in] data - a character stream
-    //  @param[in] len  - the number of bytes
+    //  \param[in] len  - the number of bytes
-    //  @param[in] seed - the previous hash, or an arbitrary value
+    //  \param[in] seed - the previous hash, or an arbitrary value
     unsigned Hasher(const void* data, size_t len, unsigned seed = 0);
 
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

src/OpenFOAM/primitives/hashes/Hasher/HasherInt.H

@@ -48,17 +48,17 @@ namespace Foam
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
     //- An optimized version of Hasher
-    //  @param[in] data - an array of uint32_t values
+    //  \param[in] data - an array of uint32_t values
-    //  @param[in] length - the number of values (not bytes)
+    //  \param[in] length - the number of values (not bytes)
-    //  @param[in] seed - the previous hash, or an arbitrary value
+    //  \param[in] seed - the previous hash, or an arbitrary value
     unsigned HasherInt(const uint32_t* data, size_t length, unsigned seed = 0);
 
     //- An optimized version of Hasher, returning dual hash values
-    //  @param[in] data - an array of uint32_t values
+    //  \param[in] data - an array of uint32_t values
-    //  @param[in] length - the number of values (not bytes)
+    //  \param[in] length - the number of values (not bytes)
-    //  @param[in] hash1 - the previous hash, or an arbitrary value
+    //  \param[in] hash1 - the previous hash, or an arbitrary value
     //    on output, the primary hash value
-    //  @param[in] hash1 - the previous hash, or an arbitrary value
+    //  \param[in] hash1 - the previous hash, or an arbitrary value
     //    on output, the secondary hash value
     unsigned HasherDual
     (

src/OpenFOAM/primitives/hashes/SHA1/SHA1.C

@@ -45,11 +45,11 @@ Description
 
 // * * * * * * * * * * * * * * Static Data Members * * * * * * * * * * * * * //
 
-//! @cond fileScope
+//! \cond fileScope
 //  The bytes used to pad buffer to the next 64-byte boundary.
 //  (RFC 1321, 3.1: Step 1)
 static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ...  */ };
-//! @endcond
+//! \endcond
 
 
 // * * * * * * * * * * * * Static Member Functions * * * * * * * * * * * * * //

src/OpenFOAM/primitives/hashes/SHA1/SHA1Digest.C

@@ -30,9 +30,9 @@ License
 
 // * * * * * * * * * * * * * * Static Data Members * * * * * * * * * * * * * //
 
-//! @cond fileScope
+//! \cond fileScope
 static const char hexChars[] = "0123456789abcdef";
-//! @endcond
+//! \endcond
 
 
 // * * * * * * * * * * * * * Private Member Functions  * * * * * * * * * * * //

src/OpenFOAM/primitives/strings/string/string.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -180,7 +180,7 @@ public:
         //    - leading "~user" : home directory for specified user
         //    - leading "~OpenFOAM" : site/user OpenFOAM configuration directory
         //
-        //  @sa
+        //  \sa
         //  Foam::findEtcFile
         string& expand(const bool recurse=false);
 
@@ -199,14 +199,14 @@ public:
 
     // Member Operators
 
-        //- Return the sub-string from the i-th character for @a n characters
+        //- Return the sub-string from the i-th character for \a n characters
         inline string operator()
         (
             const size_type i,
             const size_type n
         ) const;
 
-        //- Return the sub-string from the first character for @a n characters
+        //- Return the sub-string from the first character for \a n characters
         inline string operator()
         (
             const size_type n

src/Pstream/gamma/OPwrite.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -46,9 +46,9 @@ namespace Foam
 // Largest message sent so far. This tracks the size of the receive
 // buffer on the receiving end. Done so we only send out resize messages
 // if necessary
-//! @cond fileScope
+//! \cond fileScope
 labelList maxSendSize;
-//! @endcond
+//! \endcond
 
 
 // * * * * * * * * * * * * * * * * Destructor  * * * * * * * * * * * * * * * //

src/Pstream/mpi/PstreamGlobals.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -33,9 +33,9 @@ namespace Foam
 // * * * * * * * * * * * * * * Static Data Members * * * * * * * * * * * * * //
 
 // Outstanding non-blocking operations.
-//! @cond fileScope
+//! \cond fileScope
 DynamicList<MPI_Request> PstreamGlobals::outstandingRequests_;
-//! @endcond
+//! \endcond
 
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 

src/conversion/ensight/part/ensightPart.H

@@ -206,7 +206,7 @@ public:
         };
 
         //- Reconstruct part characteristics on freestore from Istream
-        //  @sa reconstruct
+        //  \sa reconstruct
         static autoPtr<ensightPart> New(Istream&);
 
 

src/conversion/ensight/part/ensightPartCells.H

@@ -138,7 +138,7 @@ public:
         //- Reconstruct part characteristics (eg, element types) from Istream
         //  A part reconstructed in this manner can be used when writing fields,
         //  but cannot be used to write a new geometry
-        //  @sa Foam::ensightPart::reconstruct
+        //  \sa Foam::ensightPart::reconstruct
         ensightPartCells(Istream&);
 
         //- Reconstruct part characteristics on freestore from Istream

src/conversion/ensight/part/ensightPartFaces.H

@@ -144,7 +144,7 @@ public:
         //- Reconstruct part characteristics (eg, element types) from Istream
         //  A part reconstructed in this manner can be used when writing fields,
         //  but cannot be used to write a new geometry
-        //  @sa Foam::ensightPart::reconstruct
+        //  \sa Foam::ensightPart::reconstruct
         ensightPartFaces(Istream&);
 
         //- Reconstruct part characteristics on freestore from Istream

src/conversion/meshTables/boundaryRegion.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,11 +29,11 @@ Description
 
     The meshReader supports boundaryRegion information.
 
-    The <tt>constant/boundaryRegion</tt> file is an @c IOMap<dictionary>
+    The <tt>constant/boundaryRegion</tt> file is an \c IOMap<dictionary>
     that is used to save the information persistently.
     It contains the boundaryRegion information of the following form:
 
-    @verbatim
+    \verbatim
         (
             INT
             {
@@ -42,7 +42,7 @@ Description
             }
             ...
         )
-    @endverbatim
+    \endverbatim
 
 SourceFiles
     boundaryRegion.C
@@ -149,9 +149,9 @@ public:
 
         //- Rename regions
         //  each dictionary entry is a single word:
-        //  @verbatim
+        //  \verbatim
         //      newPatchName    originalName;
-        //  @endverbatim
+        //  \endverbatim
         void rename(const dictionary&);
 };
 

src/conversion/meshTables/cellTable.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -29,11 +29,11 @@ Description
 
     The meshReader supports cellTable information.
 
-    The <tt>constant/cellTable</tt> file is an @c IOMap<dictionary> that is
+    The <tt>constant/cellTable</tt> file is an \c IOMap<dictionary> that is
     used to save the information persistently. It contains the cellTable
     information of the following form:
 
-    @verbatim
+    \verbatim
         (
             ID
             {
@@ -46,10 +46,10 @@ Description
             }
         ...
         )
-    @endverbatim
+    \endverbatim
 
-    If the @a Label is missing, a value <tt>cellTable_{ID}</tt> will be
+    If the \a Label is missing, a value <tt>cellTable_{ID}</tt> will be
-    inferred. If the @a MaterialType is missing, the value @a fluid will
+    inferred. If the \a MaterialType is missing, the value @a fluid will
     be inferred.
 
 SourceFiles

src/conversion/meshWriter/meshWriter.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -39,7 +39,7 @@ Description
 
     "constant/boundaryRegion" is an IOMap<dictionary> that contains
     the boundary type and names. eg,
-    @verbatim
+    \verbatim
         (
             0
             {
@@ -61,7 +61,7 @@ Description
                 Label           outlet;
             }
         )
-    @endverbatim
+    \endverbatim
 
 
 SourceFiles

src/dynamicMesh/meshCut/meshModifiers/meshCutter/meshCutter.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -44,7 +44,7 @@ Description
 
     -# Start:
        cell with anchor points at bottom
-    @verbatim
+    \verbatim
     +-------+
     |       +
     |       +
@@ -55,13 +55,13 @@ Description
     |       +
     +-------+
     anchor  anchor
-    @endverbatim
+    \endverbatim
 
 
     -# Topo change:
        splitface introduced at bottom of cell, introducing a new
        cell and splitting the side faces into two.
-    @verbatim
+    \verbatim
     +-------+
     |       +
     |       +
@@ -72,12 +72,12 @@ Description
     +-------+ <- splitFace
     +-------+ <- original cell
     anchor  anchor
-    @endverbatim
+    \endverbatim
 
 
     -# Inflation:
        splitface shifted up to middle of cell (or wherever cut was)
-    @verbatim
+    \verbatim
     +-------+
     |       +
     |       + <- addedCell
@@ -88,7 +88,7 @@ Description
     |       +
     +-------+
     anchor  anchor
-    @endverbatim
+    \endverbatim
 
     Anyway this was the original idea. Inflation was meant to handle
     conservative properties distribution without interpolation.

src/dynamicMesh/motionSmoother/motionSmoother.H

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2004-2010 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2004-2011 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -33,7 +33,7 @@ Description
     scale back displacement.
 
     E.g.
-    @verbatim
+    \verbatim
         // Construct iterative mesh mover.
         motionSmoother meshMover(mesh, labelList(1, patchI));
 
@@ -48,7 +48,7 @@ Description
                 return true;
             }
         }
-    @endverbatim
+    \endverbatim
 
 Note
     - Shared points (parallel): a processor can have points which are part of