Merge branch 'feature-anisotropic-solid-material-conductivity' into 'develop'

ENH: new tabulated anisotropic solid transport model

See merge request Development/openfoam!546

src/functionObjects/field/Curle/Curle.H

@@ -75,17 +75,17 @@ Usage
         c0              330;
 
 
-        // Input - either points or surface
+        // Input - either point or surface
 
-        input           points;
+        input           point;
         observerPositions ((0 0 0)(1 0 0));
 
         //input           surface;
         //surface         "inputSurface.obj"
 
 
-        // Output - either points or surface
+        // Output - either point or surface
-        output          points;
+        output          point;
 
         //output          surface;
         //surfaceType     ensight;

src/phaseSystemModels/multiphaseInter/phasesSystem/InterfaceCompositionModel/InterfaceCompositionModels.C

@@ -5,7 +5,7 @@
     \\  /    A nd           | www.openfoam.com
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
-    Copyright (C) 2017-2021 OpenCFD Ltd.
+    Copyright (C) 2017-2022 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -480,6 +480,33 @@ namespace Foam
             hTabulatedPolyIcoSolidThermoPhysics
         );
 
+        // From pure phase (tabulated) to solid phase (icoTabulated)
+        makeInterfacePureType
+        (
+            Lee,
+            heRhoThermo,
+            rhoThermo,
+            pureMixture,
+            tabulatedThermoPhysics,
+            heSolidThermo,
+            solidThermo,
+            pureMixture,
+            hTabulatedIcoTabulatedSolidThermoPhysics
+        );
+
+        // From solid phase (icoTabulated) to pure phase (tabulated)
+        makeInterfacePureType
+        (
+            Lee,
+            heSolidThermo,
+            solidThermo,
+            pureMixture,
+            hTabulatedIcoTabulatedSolidThermoPhysics,
+            heRhoThermo,
+            rhoThermo,
+            pureMixture,
+            tabulatedThermoPhysics
+        );
 
 
         // interfaceHeatResistance model definitions

src/thermophysicalModels/solidSpecie/include/solidThermoPhysicsTypes.H

@@ -6,6 +6,7 @@
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
     Copyright (C) 2011-2015 OpenFOAM Foundation
+    Copyright (C) 2022 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -37,6 +38,7 @@ Description
 #include "specie.H"
 #include "rhoConst.H"
 #include "icoPolynomial.H"
+#include "icoTabulated.H"
 #include "hConstThermo.H"
 #include "hPolynomialThermo.H"
 #include "hPowerThermo.H"
@@ -136,6 +138,19 @@ namespace Foam
                 sensibleEnthalpy
             >
         > hTabulatedPolyIcoSolidThermoPhysics;
+
+    typedef
+        tabulatedSolidTransport
+        <
+            species::thermo
+            <
+                hTabulatedThermo
+                <
+                    icoTabulated<specie>
+                >,
+                sensibleEnthalpy
+            >
+        > hTabulatedIcoTabulatedSolidThermoPhysics;
 }
 
 

src/thermophysicalModels/solidSpecie/transport/tabulated/tabulatedAnIsoSolidTransport.C

@@ -0,0 +1,77 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | www.openfoam.com
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+    Copyright (C) 2022 OpenCFD Ltd.
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+\*---------------------------------------------------------------------------*/
+
+#include "tabulatedAnIsoSolidTransport.H"
+#include "IOstreams.H"
+
+// * * * * * * * * * * * * * * * * Constructors  * * * * * * * * * * * * * * //
+
+template<class Thermo>
+Foam::tabulatedAnIsoSolidTransport<Thermo>::tabulatedAnIsoSolidTransport
+(
+    const dictionary& dict
+)
+:
+    Thermo(dict),
+    kappa_(Function1<vector>::New("kappa", dict.subDict("transport")))
+{}
+
+
+// * * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * //
+
+template<class Thermo>
+void Foam::tabulatedAnIsoSolidTransport<Thermo>::write(Ostream& os) const
+{
+    os.beginBlock(this->name());
+
+    Thermo::write(os);
+
+    {
+        os.beginBlock("transport");
+        kappa_->writeData(os);
+        os.endBlock();
+    }
+
+    os.endBlock();
+}
+
+
+// * * * * * * * * * * * * * * * IOstream Operators  * * * * * * * * * * * * //
+
+template<class Thermo>
+Foam::Ostream& Foam::operator<<
+(
+    Ostream& os,
+    const tabulatedAnIsoSolidTransport<Thermo>& pt
+)
+{
+    pt.write(os);
+    return os;
+}
+
+
+// ************************************************************************* //

src/thermophysicalModels/solidSpecie/transport/tabulated/tabulatedAnIsoSolidTransport.H

@@ -0,0 +1,181 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | www.openfoam.com
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+    Copyright (C) 2022 OpenCFD Ltd
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+Class
+    Foam::tabulatedAnIsoSolidTransport
+
+Description
+    Transport properties package using \c Function1 type data
+    for anisotropic thermal conductivity.
+
+Usage
+    Example of the specification of the transport properties:
+    \verbatim
+    transport
+    {
+        // kappa      <Function1<vector>>;
+
+        kappa         table
+        (
+            // T      kappa
+            (  200    (2.56e-5 2e-5 2e-5) )
+            (  350    (3.33e-5 1e-5 1e-5) )
+            (  400    (4.72e-5 3e-5 3-e5) )
+        );
+    }
+    \endverbatim
+
+    where the entries mean:
+    \table
+      Property  | Description                        | Type   | Reqd | Deflt
+      kappa     | Thermal conductivity  | Function1\<vector\> | yes  | -
+    \endtable
+
+SourceFiles
+    tabulatedAnIsoSolidTransportI.H
+    tabulatedAnIsoSolidTransport.C
+
+\*---------------------------------------------------------------------------*/
+
+#ifndef Foam_tabulatedAnIsoSolidTransport_H
+#define Foam_tabulatedAnIsoSolidTransport_H
+
+#include "Function1.H"
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+namespace Foam
+{
+
+// Forward Declarations
+template<class Thermo> class tabulatedAnIsoSolidTransport;
+
+template<class Thermo>
+Ostream& operator<<(Ostream&, const tabulatedAnIsoSolidTransport<Thermo>&);
+
+
+/*---------------------------------------------------------------------------*\
+                Class tabulatedAnIsoSolidTransport Declaration
+\*---------------------------------------------------------------------------*/
+
+template<class Thermo>
+class tabulatedAnIsoSolidTransport
+:
+    public Thermo
+{
+    // Private Data
+
+        //- Thermal conductivity data [W/m/K]
+        autoPtr<Function1<vector>> kappa_;
+
+
+    // Constructors
+
+        //- Construct from components
+        inline tabulatedAnIsoSolidTransport
+        (
+            const Thermo& t,
+            const autoPtr<Function1<vector>>& kappa
+        );
+
+
+public:
+
+    // Constructors
+
+        //- Construct as named copy
+        inline tabulatedAnIsoSolidTransport
+        (
+            const word&,
+            const tabulatedAnIsoSolidTransport&
+        );
+
+        //- Construct from dictionary
+        explicit tabulatedAnIsoSolidTransport(const dictionary& dict);
+
+        //- Return a clone
+        inline autoPtr<tabulatedAnIsoSolidTransport> clone() const;
+
+        // Selector from dictionary
+        inline static autoPtr<tabulatedAnIsoSolidTransport> New
+        (
+            const dictionary& dict
+        );
+
+
+    // Member Functions
+
+        //- The instantiated type name
+        static word typeName()
+        {
+            return "tabulatedAnIso<" + Thermo::typeName() + '>';
+        }
+
+        //- Is the thermal conductivity isotropic
+        static const bool isotropic = false;
+
+        //- Dynamic viscosity [kg/m/s]
+        inline scalar mu(const scalar p, const scalar T) const;
+
+        //- Thermal conductivity [W/m/K]
+        inline scalar kappa(const scalar p, const scalar T) const;
+
+        //- Thermal conductivity [W/m/K]
+        inline vector Kappa(const scalar p, const scalar T) const;
+
+        //- Thermal diffusivity of enthalpy [kg/m/s]
+        inline scalar alphah(const scalar p, const scalar T) const;
+
+        //- Write to Ostream
+        void write(Ostream& os) const;
+
+
+    // Ostream Operator
+
+        friend Ostream& operator<< <Thermo>
+        (
+            Ostream&,
+            const tabulatedAnIsoSolidTransport&
+        );
+};
+
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+} // End namespace Foam
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+#include "tabulatedAnIsoSolidTransportI.H"
+
+#ifdef NoRepository
+    #include "tabulatedAnIsoSolidTransport.C"
+#endif
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+#endif
+
+// ************************************************************************* //

src/thermophysicalModels/solidSpecie/transport/tabulated/tabulatedAnIsoSolidTransportI.H

@@ -0,0 +1,120 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | www.openfoam.com
+     \\/     M anipulation  |
+-------------------------------------------------------------------------------
+    Copyright (C) 2022 OpenCFD Ltd.
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+    for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+\*---------------------------------------------------------------------------*/
+
+#include "specie.H"
+
+// * * * * * * * * * * * * * * * * Constructors  * * * * * * * * * * * * * * //
+
+template<class Thermo>
+inline Foam::tabulatedAnIsoSolidTransport<Thermo>::tabulatedAnIsoSolidTransport
+(
+    const Thermo& t,
+    const autoPtr<Function1<vector>>& kappa
+
+)
+:
+    Thermo(t),
+    kappa_(kappa.clone())
+{}
+
+
+template<class Thermo>
+inline Foam::tabulatedAnIsoSolidTransport<Thermo>::tabulatedAnIsoSolidTransport
+(
+    const word& name,
+    const tabulatedAnIsoSolidTransport& pt
+)
+:
+    Thermo(name, pt),
+    kappa_(pt.kappa_.clone())
+{}
+
+
+template<class Thermo>
+inline Foam::autoPtr<Foam::tabulatedAnIsoSolidTransport<Thermo>>
+Foam::tabulatedAnIsoSolidTransport<Thermo>::clone() const
+{
+    return autoPtr<tabulatedAnIsoSolidTransport<Thermo>>::New(*this);
+}
+
+
+template<class Thermo>
+inline Foam::autoPtr<Foam::tabulatedAnIsoSolidTransport<Thermo>>
+Foam::tabulatedAnIsoSolidTransport<Thermo>::New(const dictionary& dict)
+{
+    return autoPtr<tabulatedAnIsoSolidTransport<Thermo>>::New(dict);
+}
+
+
+// * * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * //
+
+template<class Thermo>
+inline Foam::scalar Foam::tabulatedAnIsoSolidTransport<Thermo>::mu
+(
+    const scalar p,
+    const scalar T
+) const
+{
+    NotImplemented;
+    return 0;
+}
+
+
+template<class Thermo>
+inline Foam::scalar Foam::tabulatedAnIsoSolidTransport<Thermo>::kappa
+(
+    const scalar p,
+    const scalar T
+) const
+{
+    return mag(kappa_->value(T));
+}
+
+
+template<class Thermo>
+inline Foam::vector Foam::tabulatedAnIsoSolidTransport<Thermo>::Kappa
+(
+    const scalar p,
+    const scalar T
+) const
+{
+    return kappa_->value(T);
+}
+
+
+template<class Thermo>
+inline Foam::scalar Foam::tabulatedAnIsoSolidTransport<Thermo>::alphah
+(
+    const scalar p,
+    const scalar T
+) const
+{
+    return kappa(p, T)/this->Cp(p, T);
+}
+
+
+// ************************************************************************* //

src/thermophysicalModels/solidThermo/solidThermo/solidThermos.C

@@ -33,6 +33,7 @@ License
 #include "specie.H"
 #include "rhoConst.H"
 #include "icoPolynomial.H"
+#include "icoTabulated.H"
 #include "hConstThermo.H"
 #include "hPowerThermo.H"
 #include "hPolynomialThermo.H"
@@ -42,6 +43,7 @@ License
 #include "exponentialSolidTransport.H"
 #include "polynomialSolidTransport.H"
 #include "tabulatedSolidTransport.H"
+#include "tabulatedAnIsoSolidTransport.H"
 #include "pureMixture.H"
 #include "sensibleEnthalpy.H"
 #include "sensibleInternalEnergy.H"
@@ -116,6 +118,30 @@ makeSolidThermo
     specie
 );
 
+makeSolidThermo
+(
+    solidThermo,
+    heSolidThermo,
+    pureMixture,
+    tabulatedSolidTransport,
+    sensibleEnthalpy,
+    hTabulatedThermo,
+    icoTabulated,
+    specie
+);
+
+makeSolidThermo
+(
+    solidThermo,
+    heSolidThermo,
+    pureMixture,
+    tabulatedAnIsoSolidTransport,
+    sensibleEnthalpy,
+    hTabulatedThermo,
+    icoPolynomial,
+    specie
+);
+
 makeSolidThermoPhysicsType
 (
     solidThermo,

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/Allclean

@@ -3,12 +3,9 @@ cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-cleanCase0
+rm -rf setups
-
-rm -rf 0.orig
-rm -rf system
-rm -rf constant
 rm -rf results
 rm -rf plots
+rm -f setups.orig/common/constant/transportProperties
 
 #------------------------------------------------------------------------------

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/Allrun

@@ -1,10 +1,9 @@
 #!/bin/sh
 cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
-. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-# setups
+# settings
 
     # operand setups
     setups="
@@ -12,6 +11,18 @@ cd "${0%/*}" || exit                                # Run from this directory
     LaunderSharmaKE-nutkWallFunction
     "
 
+    # flag to enable computations
+    run=true
+
+    # flag to enable computations in parallel mode
+    parallel=false
+
+    # flag to enable to use a common mesh
+    common_mesh=true
+
+    # flag to enable to use a common dynamic code
+    common_dynamic_code=true
+
     # operand exponents of kinematic viscosity values
     nuExponents="2 3 4 5 6 7 8"
 
@@ -19,107 +30,163 @@ cd "${0%/*}" || exit                                # Run from this directory
 #------------------------------------------------------------------------------
 
 #######################################
-# Collect results into a given path
+# Create the given setup
-# and clean the case for the next run
 # Arguments:
-#    $1 = Path to move results
+#    $1 = Path to create the setup
 # Outputs:
 #    Writes info to stdout
 #######################################
-collect() {
+dry_run_setup() {
 
-    [ $# -eq 0 ] && { echo "Usage: $0 dir-model"; exit 1; }
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
 
-    collection="$1"
+    setup="$1"
+    exponent="$2"
+    dirSetup="setups/$setup/$exponent"
+    dirSetupOrig="setups.orig/$setup"
+    dirOrig="$dirSetupOrig/0.orig"
+    dirConstant="$dirSetupOrig/constant"
+    dirSystem="$dirSetupOrig/system"
 
-    dirResult=results/"$collection"
+    printf "\n# Create the setup: %s %s\n" "$setup" nu=1e-"$exponent"
-    dirSettings="$dirResult"/settings
+
+    if [ ! -d "$dirSetup" ]
+    then
+        mkdir -p "$dirSetup"
+
+        cp -aRfL "setups.orig/common/." "$dirSetup"
+        cp -afL "$dirSetupOrig"/All* "$dirSetup" 2>/dev/null || :
+        [ -d "$dirOrig" ] && cp -aRfL "$dirOrig/." "$dirSetup/0.orig"
+        [ -d "$dirConstant" ] && cp -aRfL "$dirConstant/." "$dirSetup/constant"
+        [ -d "$dirSystem" ] && cp -aRfL "$dirSystem/." "$dirSetup/system"
+    else
+        printf "\n      # Directory %s already exists\n" "$dirSetup"
+        printf "      # Skipping the creation of a new setup\n"
+    fi
+}
+
+
+#######################################
+# Run the given setup
+# Arguments:
+#    $1 = Path to the setup to run
+# Outputs:
+#    Writes info to stdout
+#######################################
+run_setup() {
+
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
+
+    setup="$1"
+    exponent="$2"
+    dirSetup="setups/$setup/$exponent"
+    dirResult="results/$setup/$exponent"
+
+    dry_run_setup "$setup" "$exponent"
+    [ -d results ] || mkdir -p results
+    [ -d results/"$setup" ] || mkdir -p results/"$setup"
+
+    printf "\n# Run the setup: %s %s\n\n" "$setup" nu=1e-"$exponent"
 
     if [ ! -d "$dirResult" ]
     then
+        cp -Rf "$dirSetup" "$dirResult"
 
-        echo "      # Collecting results and settings into $dirResult"
+        if [ "$common_mesh" = true ]
-
+        then
-        mkdir -p "$dirResult"
+            if [ -d results/mesh ]
-        mkdir -p "$dirSettings"
+            then
-
+                printf "## Copy the common mesh to the setup: %s\n\n" "$setup"
-        mv -f $(foamListTimes) "$dirResult"
+                cp -Rf results/mesh/polyMesh "$dirResult"/constant/.
-        [ -d postProcessing ] && mv -f postProcessing "$dirResult"
+            fi
-        mv -f log.* "$dirResult"
-        mv -f graphs/ "$dirResult"
-        mv -f logs/ "$dirResult"
-        cp -f system/{fv*,controlDict} constant/*Properties "$dirSettings"
-        mv -f 0/ "$dirSettings"
-
-        echo "      # Cleaning up the case"
-
-        cleanTimeDirectories
-        cleanAuxiliary
-        cleanPostProcessing
-
-    else
-
-        echo "      # Directory $dirResult already exists"
-        echo "      # Skipping the computation"
-
         fi
 
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ -d results/dynamicCode ]
+            then
+                printf "## Copy the common dynamic code to the setup: %s\n\n" "$setup"
+                cp -Rf results/dynamicCode "$dirResult"/.
+            fi
+        fi
+
+
+        if [ "$parallel" = true ]
+        then
+            ( cd "$dirResult" && ./Allrun-parallel )
+        else
+            ( cd "$dirResult" && ./Allrun )
+        fi
+
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ ! -d results/mesh ]
+            then
+                printf "\n## Store the mesh of %s as the common mesh\n\n" "$setup"
+                mkdir -p results/mesh
+                cp -Rf "$dirResult"/constant/polyMesh results/mesh/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ ! -d results/dynamicCode ] && [ -d "$dirResult"/dynamicCode ]
+            then
+                printf "\n## Store the dynamic code of %s as the common dynamic code\n\n" "$setup"
+                cp -Rf "$dirResult"/dynamicCode results/.
+            fi
+        fi
+
+
+    else
+        printf "      # Directory %s already exists\n" "$dirResult"
+        printf "      # Skipping the computation of the given setup\n"
+    fi
 }
 
 
 #------------------------------------------------------------------------------
 
-for setup in $setups
+[ "$parallel" = true ] && {
-do
+    echo "boundaryFoam has no parallel option - skipping the execution" 1>&2
-
+    exit 1
-    echo ""
+}
-    echo "# Computations for the setup: $setup"
+
-    echo ""
+
-
+#------------------------------------------------------------------------------
-    dirSetup="setups.orig/$setup"
+
-    cp -rfL "$dirSetup/0.orig" .
+for exponent in $nuExponents
-    cp -rfL "$dirSetup/constant" .
+do
-    cp -rfL "$dirSetup/system" .
+    sed "s|EXPONENT|$exponent|g" \
-    cp -rf 0.orig/ 0/
+        setups.orig/common/constant/transportProperties.template > \
-
+        setups.orig/common/constant/transportProperties
-    if [ ! -d constant/polyMesh ]
+
-    then
+    for setup in $setups
-        runApplication blockMesh
+    do
-        runApplication renumberMesh -overwrite -constant
+        dirSetupOrig="setups.orig/$setup"
-        runApplication checkMesh -allTopology -allGeometry -constant
+
-    fi
+        if [ ! -d "$dirSetupOrig" ]
-
+        then
-    echo "# yPlus vs uPlus" > yPlus_vs_uPlus.xy
+            echo "Setup directory: $dirSetupOrig" \
-
+                "could not be found - skipping execution" 1>&2
-    for exponent in $nuExponents
+            continue
-    do
+        fi
-
+
-        echo "    Setting nu to 1e-$exponent"
+        if [ "$run" = true ]
-
+        then
-        sed "s|EXPONENT|$exponent|g" constant/transportProperties.template \
+            run_setup "$setup" "$exponent"
-            > constant/transportProperties
+        else
-
+            dry_run_setup "$setup" "$exponent"
-        [ -d 0 ] || restore0Dir
+        fi
-
+    done
-        runApplication $(getApplication)
+done
-
+
-        runApplication foamLog log.boundaryFoam
+
-
+if notTest "$@" && [ "$run" = true ]
-        if [ -e logs/yPlus_0 ]
+then
-        then
+    ./plot
-            yPlus=$(awk < logs/yPlus_0 'END{print $2}')
+fi
-            uPlus=$(awk < logs/uPlus_0 'END{print $2}')
-
-            echo "$yPlus $uPlus" >> yPlus_vs_uPlus.xy
-        fi
-
-        collect "$setup/$exponent"
-
-    done
-
-    mv -f yPlus_vs_uPlus.xy results/"$setup"/
-
-done
 
 
 #------------------------------------------------------------------------------

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/README

@@ -10,4 +10,4 @@ Usage:
 
 - run test using Allrun script
 - uses foamLog to generate u+ and y+ values
-- postscript (.eps) plot generated using gnuplot, OF_vs_ANALYTICAL.eps
+- plots are generated using gnuplot, and can be found under plots directory

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/plot

@@ -72,16 +72,19 @@ command -v gnuplot >/dev/null || {
 
 for setup in $setups
 do
-
     echo ""
     echo "# Plots for the setup: $setup"
     echo ""
 
+    [ -d "results/$setup" ] || {
+        echo "No results/$setup directory found - skipping graph creation" 1>&2
+        continue
+    }
+
     dirPlots="plots/$setup"
     [ -d "$dirPlots" ] || mkdir -p "$dirPlots"
 
     plot_yPlus_vs_uPlus "$setup"
-
 done
 
 

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/LaunderSharmaKE-nutkWallFunction/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/LaunderSharmaKE-nutkWallFunction/0.orig/epsilon

@@ -1 +0,0 @@
-../../common/0.orig/epsilon

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/LaunderSharmaKE-nutkWallFunction/0.orig/k

@@ -1 +0,0 @@
-../../common/0.orig/k

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/LaunderSharmaKE-nutkWallFunction/constant/transportProperties.template

@@ -1 +0,0 @@
-../../common/constant/transportProperties.template

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/LaunderSharmaKE-nutkWallFunction/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/common/Allclean

@@ -0,0 +1,8 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
+#------------------------------------------------------------------------------
+
+cleanCase0
+
+#------------------------------------------------------------------------------

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/common/Allrun

@@ -0,0 +1,20 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication $(getApplication)
+
+runApplication foamLog log.boundaryFoam
+
+if [ -e logs/yPlus_0 ]
+then
+    yPlus=$(awk < logs/yPlus_0 'END{print $2}')
+    uPlus=$(awk < logs/uPlus_0 'END{print $2}')
+
+    echo "$yPlus $uPlus" >> ../yPlus_vs_uPlus.xy
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/common/Allrun.pre

@@ -0,0 +1,19 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+canCompile || exit 0    # Dynamic code
+
+restore0Dir
+
+if [ ! -d constant/polyMesh ]
+then
+    runApplication blockMesh
+
+    runApplication renumberMesh -overwrite -constant
+
+    runApplication checkMesh -allTopology -allGeometry -constant
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/kEpsilon-nutkWallFunction/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/kEpsilon-nutkWallFunction/0.orig/epsilon

@@ -1 +0,0 @@
-../../common/0.orig/epsilon

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/kEpsilon-nutkWallFunction/0.orig/k

@@ -1 +0,0 @@
-../../common/0.orig/k

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/kEpsilon-nutkWallFunction/constant/transportProperties.template

@@ -1 +0,0 @@
-../../common/constant/transportProperties.template

tutorials/incompressible/boundaryFoam/steadyBoundaryLayer/setups.orig/kEpsilon-nutkWallFunction/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/Allclean

@@ -3,14 +3,9 @@ cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-cleanCase0
+rm -rf setups
-
-rm -rf 0.orig
-rm -rf system
-rm -rf constant
 rm -rf results
 rm -rf plots
-rm -f *.dat
 
 ( cd validation/WatersKing && wclean WatersKing )
 

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/Allrun

@@ -1,10 +1,9 @@
 #!/bin/sh
 cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
-. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-# setups
+# settings
 
     # operand setups
     setups="
@@ -12,124 +11,161 @@ cd "${0%/*}" || exit                                # Run from this directory
     Stokes
     "
 
+    # flag to enable computations
+    run=true
+
     # flag to enable computations in parallel mode
     parallel=true
 
+    # flag to enable to use a common mesh
+    common_mesh=true
+
+    # flag to enable to use a common dynamic code
+    common_dynamic_code=true
+
 
 #------------------------------------------------------------------------------
 
 #######################################
-# Collect results into a given path
+# Create the given setup
-# and clean the case for the next run
 # Arguments:
-#    $1 = Path to move results
+#    $1 = Path to create the setup
 # Outputs:
 #    Writes info to stdout
 #######################################
-collect() {
+dry_run_setup() {
 
-    [ $# -eq 0 ] && { echo "Usage: $0 dir-model"; exit 1; }
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
 
-    collection="$1"
+    setup="$1"
+    dirSetup="setups/$setup"
+    dirSetupOrig="setups.orig/$setup"
+    dirOrig="$dirSetupOrig/0.orig"
+    dirConstant="$dirSetupOrig/constant"
+    dirSystem="$dirSetupOrig/system"
 
-    dirResult=results/"$collection"
+    printf "\n# Create the setup: %s\n" "$setup"
-    dirSettings="$dirResult"/settings
 
-    if [ ! -d "$dirResult" ]
+    if [ ! -d "$dirSetup" ]
     then
+        mkdir -p "$dirSetup"
 
-        echo "      # Collecting results and settings into $dirResult"
+        cp -aRfL "setups.orig/common/." "$dirSetup"
-
+        cp -afL "$dirSetupOrig"/All* "$dirSetup" 2>/dev/null || :
-        mkdir -p "$dirResult"
+        [ -d "$dirOrig" ] && cp -aRfL "$dirOrig/." "$dirSetup/0.orig"
-        mkdir -p "$dirSettings"
+        [ -d "$dirConstant" ] && cp -aRfL "$dirConstant/." "$dirSetup/constant"
-
+        [ -d "$dirSystem" ] && cp -aRfL "$dirSystem/." "$dirSetup/system"
-        mv -f $(foamListTimes) "$dirResult"
-        [ -d postProcessing ] && mv -f postProcessing "$dirResult"
-        [ -d processor0 ] && mv -f processor* "$dirResult"
-        mv -f log.* "$dirResult"
-        cp -f system/{fv*,controlDict} constant/*Properties "$dirSettings"
-        mv -f 0/ "$dirSettings"
-
-        echo "      # Cleaning up the case"
-
-        cleanTimeDirectories
-        cleanAuxiliary
-        cleanPostProcessing
-
     else
-
+        printf "\n      # Directory %s already exists\n" "$dirSetup"
-        echo "      # Directory $dirResult already exists"
+        printf "      # Skipping the creation of a new setup\n"
-        echo "      # Skipping the computation"
-
     fi
-
 }
 
 
-#------------------------------------------------------------------------------
+#######################################
+# Run the given setup
+# Arguments:
+#    $1 = Path to the setup to run
+# Outputs:
+#    Writes info to stdout
+#######################################
+run_setup() {
 
-if ! canCompile
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
-then
+
-    echo "skipping tutorial $PWD"
+    setup="$1"
-    exit 0
+    dirSetup="setups/$setup"
-fi
+    dirResult="results/$setup"
+
+    dry_run_setup "$setup"
+    [ -d results ] || mkdir -p results
+
+    printf "\n# Run the setup: %s\n\n" "$setup"
+
+    if [ ! -d "$dirResult" ]
+    then
+        cp -Rf "$dirSetup" "$dirResult"
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ -d results/mesh ]
+            then
+                printf "## Copy the common mesh to the setup: %s\n\n" "$setup"
+                cp -Rf results/mesh/polyMesh "$dirResult"/constant/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ -d results/dynamicCode ]
+            then
+                printf "## Copy the common dynamic code to the setup: %s\n\n" "$setup"
+                cp -Rf results/dynamicCode "$dirResult"/.
+            fi
+        fi
+
+
+        if [ "$parallel" = true ]
+        then
+            ( cd "$dirResult" && ./Allrun-parallel )
+        else
+            ( cd "$dirResult" && ./Allrun )
+        fi
+
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ ! -d results/mesh ]
+            then
+                printf "\n## Store the mesh of %s as the common mesh\n\n" "$setup"
+                mkdir -p results/mesh
+                cp -Rf "$dirResult"/constant/polyMesh results/mesh/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ ! -d results/dynamicCode ] && [ -d "$dirResult"/dynamicCode ]
+            then
+                printf "\n## Store the dynamic code of %s as the common dynamic code\n\n" "$setup"
+                cp -Rf "$dirResult"/dynamicCode results/.
+            fi
+        fi
+
+
+    else
+        printf "      # Directory %s already exists\n" "$dirResult"
+        printf "      # Skipping the computation of the given setup\n"
+    fi
+}
 
 
 #------------------------------------------------------------------------------
 
 for setup in $setups
 do
+    dirSetupOrig="setups.orig/$setup"
 
-    echo ""
+    if [ ! -d "$dirSetupOrig" ]
-    echo "# Computations for the setup: $setup"
-    echo ""
-
-    dirSetup="setups.orig/$setup"
-    cp -rfL "$dirSetup/0.orig" .
-    cp -rfL "$dirSetup/constant" .
-    cp -rfL "$dirSetup/system" .
-    cp -rf 0.orig/ 0/
-
-    if [ ! -d constant/polyMesh ]
     then
-
+        echo "Setup directory: $dirSetupOrig" \
-        runApplication blockMesh
+             "could not be found - skipping execution" 1>&2
-
+        continue
-        runApplication renumberMesh -overwrite -constant
-
-        runApplication checkMesh -allTopology -allGeometry -constant
     fi
 
-    if [ "$parallel" = true ]
+    if [ "$run" = true ]
     then
-
+        run_setup "$setup"
-        runApplication decomposePar
-
-        runParallel $(getApplication)
-
-        runApplication reconstructPar
-
     else
-
+        dry_run_setup "$setup"
-        runApplication $(getApplication)
-
     fi
-
-    if notTest "$@"
-    then
-        # postprocessing
-        tail -n +4 postProcessing/probes/0/U  | \
-            tr -s " " | tr -d '(' | cut -d " " -f2-3 > \
-            postProcessing/probes/0/Unp
-    fi
-
-    collect "$setup"
-
 done
 
-( cd validation/WatersKing && wmake )
 
-runApplication WatersKing
+if notTest "$@" && [ "$run" = true ]
+then
+    ./plot
+fi
 
 
 #------------------------------------------------------------------------------

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/plot

@@ -12,37 +12,21 @@ cd "${0%/*}" || exit                                # Run from this directory
     "
 
 
-#------------------------------------------------------------------------------
-
-# Requires gnuplot
-command -v gnuplot >/dev/null || {
-    echo "FOAM FATAL ERROR: gnuplot not found - skipping graph creation" 1>&2
-    exit 1
-}
-
-# Check "results" directory
-[ -d "results" ] || {
-    echo "FOAM FATAL ERROR: No results directory found - skipping graph creation" 1>&2
-    exit 1
-}
-
-
 #------------------------------------------------------------------------------
 
 plot_t_vs_Ux() {
 
     setups=$@
 
-    benchmarkFile="WatersKing.dat"
-
     n=0
     for setup in $setups
     do
+        benchmarkFile="results/$setup/WatersKing.dat"
         sampleFiles[$n]="results/$setup/postProcessing/probes/0/Unp"
         n=$(($n+1))
     done
 
-    endTime=$(foamDictionary system/controlDict -entry endTime -value)
+    endTime=$(foamDictionary results/$setup/system/controlDict -entry endTime -value)
     image="plots/planarPoiseuille.png"
 
     gnuplot<<PLT
@@ -70,6 +54,21 @@ PLT
 }
 
 
+#------------------------------------------------------------------------------
+
+# Requires gnuplot
+command -v gnuplot >/dev/null || {
+    echo "gnuplot not found - skipping graph creation" 1>&2
+    exit 1
+}
+
+# Check "results" directory
+[ -d "results" ] || {
+    echo "No results directory found - skipping graph creation" 1>&2
+    exit 1
+}
+
+
 #------------------------------------------------------------------------------
 
 echo ""

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Maxwell/0.orig

@@ -1 +0,0 @@
-../common/0.orig/

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Maxwell/constant/fvOptions

@@ -1 +0,0 @@
-../../common/constant/fvOptions

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Maxwell/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Maxwell/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Stokes/0.orig

@@ -1 +0,0 @@
-../common/0.orig/

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Stokes/constant/fvOptions

@@ -1 +0,0 @@
-../../common/constant/fvOptions

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Stokes/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/Stokes/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/common/Allclean

@@ -0,0 +1,8 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
+#------------------------------------------------------------------------------
+
+cleanCase0
+
+#------------------------------------------------------------------------------

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/common/Allrun

@@ -0,0 +1,22 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication $(getApplication)
+
+
+if notTest "$@"
+then
+    # postprocessing
+    tail -n +4 postProcessing/probes/0/U  | \
+        tr -s " " | tr -d '(' | cut -d " " -f2-3 > \
+        postProcessing/probes/0/Unp
+
+    ( cd ../../validation/WatersKing && wmake )
+    runApplication WatersKing
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/common/Allrun-parallel

@@ -0,0 +1,26 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication decomposePar
+
+runParallel $(getApplication)
+
+runApplication reconstructPar
+
+
+if notTest "$@"
+then
+    # postprocessing
+    tail -n +4 postProcessing/probes/0/U  | \
+        tr -s " " | tr -d '(' | cut -d " " -f2-3 > \
+        postProcessing/probes/0/Unp
+
+    ( cd ../../validation/WatersKing && wmake )
+    runApplication WatersKing
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/pimpleFoam/laminar/planarPoiseuille/setups.orig/common/Allrun.pre

@@ -0,0 +1,19 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+canCompile || exit 0    # Dynamic code
+
+restore0Dir
+
+if [ ! -d constant/polyMesh ]
+then
+    runApplication blockMesh
+
+    runApplication renumberMesh -overwrite -constant
+
+    runApplication checkMesh -allTopology -allGeometry -constant
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/airFoil2D/0.orig/nuTilda

@@ -16,20 +16,20 @@ FoamFile
 
 dimensions      [0 2 -1 0 0 0 0];
 
-internalField   uniform 0.14;
+internalField   uniform 4e-05;
 
 boundaryField
 {
     inlet
     {
         type            freestream;
-        freestreamValue uniform 0.14;
+        freestreamValue $internalField;
     }
 
     outlet
     {
         type            freestream;
-        freestreamValue uniform 0.14;
+        freestreamValue $internalField;
     }
 
     walls

tutorials/incompressible/simpleFoam/airFoil2D/0.orig/nut

@@ -16,20 +16,20 @@ FoamFile
 
 dimensions      [0 2 -1 0 0 0 0];
 
-internalField   uniform 0.14;
+internalField   uniform 1e-05;
 
 boundaryField
 {
     inlet
     {
         type            freestream;
-        freestreamValue uniform 0.14;
+        freestreamValue $internalField;
     }
 
     outlet
     {
         type            freestream;
-        freestreamValue uniform 0.14;
+        freestreamValue $internalField;
     }
 
     walls

tutorials/incompressible/simpleFoam/bump2D/Allclean

@@ -3,8 +3,8 @@ cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-cleanCase0
+rm -rf setups
-
+rm -rf results
-rm -rf *.png
+rm -rf plots
 
 #------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/Allrun

@@ -1,7 +1,6 @@
 #!/bin/sh
 cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
-. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
 # settings
@@ -13,106 +12,132 @@ cd "${0%/*}" || exit                                # Run from this directory
     kEpsilonPhitF
     "
 
+    # flag to enable computations
+    run=true
+
     # flag to enable computations in parallel mode
     parallel=true
 
+    # flag to enable to use a common mesh
+    common_mesh=true
+
+    # flag to enable to use a common dynamic code
+    common_dynamic_code=true
+
 
 #------------------------------------------------------------------------------
 
 #######################################
-# Extract a value (Eg, from boundaryField/bump/value)
+# Create the given setup
 # Arguments:
-#    $1 = dictEntry
+#    $1 = Path to create the setup
-#    $2 = inputFile
-#    $3 = outputFile
 # Outputs:
-#    Writes to 'outputFile'
+#    Writes info to stdout
-# Notes:
-#    Only retains values between, but not including the ( ) delimiters.
-#    For example,
-#----
-#    value           nonuniform List<scalar>
-#    110
-#    (
-#    0.0041520092
-#    0.012577691
-#    0.021250264
-#    0.030176962
-#    )
-#    ;
 #######################################
-extractVal()
+dry_run_setup() {
-{
+
-    if [ -f "$2" ]
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
+
+    setup="$1"
+    dirSetup="setups/$setup"
+    dirSetupOrig="setups.orig/$setup"
+    dirOrig="$dirSetupOrig/0.orig"
+    dirConstant="$dirSetupOrig/constant"
+    dirSystem="$dirSetupOrig/system"
+
+    printf "\n# Create the setup: %s\n" "$setup"
+
+    if [ ! -d "$dirSetup" ]
     then
-        foamDictionary -entry "$1" -value "$2" | \
+        mkdir -p "$dirSetup"
-            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+
-            > "$3"
+        cp -aRfL "setups.orig/common/." "$dirSetup"
+        cp -afL "$dirSetupOrig"/All* "$dirSetup" 2>/dev/null || :
+        [ -d "$dirOrig" ] && cp -aRfL "$dirOrig/." "$dirSetup/0.orig"
+        [ -d "$dirConstant" ] && cp -aRfL "$dirConstant/." "$dirSetup/constant"
+        [ -d "$dirSystem" ] && cp -aRfL "$dirSystem/." "$dirSetup/system"
     else
-        # Or some other tag?
+        printf "\n      # Directory %s already exists\n" "$dirSetup"
-        echo "Not such file: $2" 1>&2
+        printf "      # Skipping the creation of a new setup\n"
-        echo "0" > "$3"
     fi
 }
 
 
 #######################################
-# Collect results into a given path
+# Run the given setup
-# and clean the case for the next run
 # Arguments:
-#    $1 = Path to move results
+#    $1 = Path to the setup to run
 # Outputs:
 #    Writes info to stdout
 #######################################
-collect() {
+run_setup() {
 
-    [ $# -eq 0 ] && { echo "Usage: $0 dir-model"; exit 1; }
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
 
-    collection="$1"
+    setup="$1"
+    dirSetup="setups/$setup"
+    dirResult="results/$setup"
 
-    dirResult=results/"$collection"
+    dry_run_setup "$setup"
-    dirSettings="$dirResult"/settings
+    [ -d results ] || mkdir -p results
+
+    printf "\n# Run the setup: %s\n\n" "$setup"
 
     if [ ! -d "$dirResult" ]
     then
+        cp -Rf "$dirSetup" "$dirResult"
 
-        echo "      # Collecting results and settings into $dirResult"
+        if [ "$common_mesh" = true ]
-
+        then
-        mkdir -p "$dirResult"
+            if [ -d results/mesh ]
-        mkdir -p "$dirSettings"
+            then
-
+                printf "## Copy the common mesh to the setup: %s\n\n" "$setup"
-        endTime=$(foamListTimes -latestTime)
+                cp -Rf results/mesh/polyMesh "$dirResult"/constant/.
-
+            fi
-        # Create datasets for benchmark comparisons
-        extractVal boundaryField.bump.value "$endTime/Cx" Cx.$$
-        extractVal boundaryField.bump.value "$endTime/wallShearStress" tau.$$
-        extractVal boundaryField.bump.value "$endTime/Cp" cp.$$
-
-        echo "# ccx tau_xx tau_yy tau_zz cp" > profiles.dat
-        paste -d ' ' Cx.$$ tau.$$ cp.$$ >> profiles.dat
-        rm -f Cx.$$ tau.$$ cp.$$
-
-        mv -f $(foamListTimes) "$dirResult"
-        [ -d postProcessing ] && mv -f postProcessing "$dirResult"
-        [ -d processor0 ] && mv -f processor* "$dirResult"
-        mv -f log.* "$dirResult"
-        mv -f profiles.dat "$dirResult"
-        cp -f system/{fv*,controlDict} constant/*Properties "$dirSettings"
-        mv -f 0/ "$dirSettings"
-
-        echo "      # Cleaning up the case"
-
-        cleanTimeDirectories
-        cleanAuxiliary
-        cleanPostProcessing
-
-    else
-
-        echo "      # Directory $dirResult already exists"
-        echo "      # Skipping the computation"
-
         fi
 
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ -d results/dynamicCode ]
+            then
+                printf "## Copy the common dynamic code to the setup: %s\n\n" "$setup"
+                cp -Rf results/dynamicCode "$dirResult"/.
+            fi
+        fi
+
+
+        if [ "$parallel" = true ]
+        then
+            ( cd "$dirResult" && ./Allrun-parallel )
+        else
+            ( cd "$dirResult" && ./Allrun )
+        fi
+
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ ! -d results/mesh ]
+            then
+                printf "\n## Store the mesh of %s as the common mesh\n\n" "$setup"
+                mkdir -p results/mesh
+                cp -Rf "$dirResult"/constant/polyMesh results/mesh/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ ! -d results/dynamicCode ] && [ -d "$dirResult"/dynamicCode ]
+            then
+                printf "\n## Store the dynamic code of %s as the common dynamic code\n\n" "$setup"
+                cp -Rf "$dirResult"/dynamicCode results/.
+            fi
+        fi
+
+
+    else
+        printf "      # Directory %s already exists\n" "$dirResult"
+        printf "      # Skipping the computation of the given setup\n"
+    fi
 }
 
 
@@ -120,58 +145,28 @@ collect() {
 
 for setup in $setups
 do
+    dirSetupOrig="setups.orig/$setup"
 
-    echo ""
+    if [ ! -d "$dirSetupOrig" ]
-    echo "# Computations for the setup: $setup"
-    echo ""
-
-    dirSetup="setups.orig/$setup"
-
-    if [ ! -d "$dirSetup" ]
     then
-        echo "Setup directory: $dirSetup" \
+        echo "Setup directory: $dirSetupOrig" \
              "could not be found - skipping execution" 1>&2
-        exit 1
+        continue
     fi
 
-    cp -rfL "$dirSetup/0.orig" .
+    if [ "$run" = true ]
-    cp -rfL "$dirSetup/constant" .
-    cp -rfL "$dirSetup/system" .
-    cp -rf 0.orig/ 0/
-
-    canCompile || exit 0    # Dynamic code
-
-    if [ ! -d constant/polyMesh ]
     then
-
+        run_setup "$setup"
-        runApplication blockMesh
-
-        runApplication renumberMesh -overwrite -constant
-
-        runApplication checkMesh -allTopology -allGeometry -constant
-
-    fi
-
-    if [ "$parallel" = true ]
-    then
-
-        runApplication decomposePar
-
-        runParallel -s parallel renumberMesh -overwrite
-
-        runParallel $(getApplication)
-
-        runApplication reconstructPar
-
     else
-
+        dry_run_setup "$setup"
-        runApplication $(getApplication)
-
     fi
-
-    collect "$setup"
-
 done
 
 
+if notTest "$@" && [ "$run" = true ]
+then
+    ./plot
+fi
+
+
 #------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/plot

@@ -122,44 +122,39 @@ PLT_X_CP
 
 # Requires gnuplot
 command -v gnuplot >/dev/null || {
-    echo "FOAM FATAL ERROR: gnuplot not found - skipping graph creation" 1>&2
+    echo "gnuplot not found - skipping graph creation" 1>&2
     exit 1
 }
 
 # Requires awk
 command -v awk >/dev/null || {
-    echo "FOAM FATAL ERROR: awk not found - skipping graph creation" 1>&2
+    echo "awk not found - skipping graph creation" 1>&2
     exit 1
 }
 
 # Check "results" directory
 [ -d "results" ] || {
-    echo "FOAM FATAL ERROR: No results directory found - skipping graph creation" 1>&2
+    echo "No results directory found - skipping graph creation" 1>&2
     exit 1
 }
 
 
 #------------------------------------------------------------------------------
 
-if notTest "$@"
+dirPlots="plots"
-then
+[ -d "$dirPlots" ] || mkdir -p "$dirPlots"
 
-    dirPlots="plots/$setup"
+echo ""
-    [ -d "$dirPlots" ] || mkdir -p "$dirPlots"
+echo "# Plots for the skin friction coefficient"
+echo ""
 
-    echo ""
+plot_x_vs_Cf "$Uref" $setups
-    echo "# Plots for the skin friction coefficient"
-    echo ""
 
-    plot_x_vs_Cf "$Uref" $setups
+echo ""
+echo "# Plots for the pressure coefficient"
+echo ""
 
-    echo ""
+plot_x_vs_Cp "$Uref" $setups
-    echo "# Plots for the pressure coefficient"
-    echo ""
-
-    plot_x_vs_Cp "$Uref" $setups
-
-fi
 
 
 # ------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/setups.orig/SpalartAllmaras/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/simpleFoam/bump2D/setups.orig/SpalartAllmaras/0.orig/nut

@@ -1 +0,0 @@
-../../common/0.orig/nut

tutorials/incompressible/simpleFoam/bump2D/setups.orig/SpalartAllmaras/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/incompressible/simpleFoam/bump2D/setups.orig/SpalartAllmaras/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/simpleFoam/bump2D/setups.orig/SpalartAllmaras/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/simpleFoam/bump2D/setups.orig/common/Allclean

@@ -0,0 +1,8 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
+#------------------------------------------------------------------------------
+
+cleanCase0
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/setups.orig/common/Allrun

@@ -0,0 +1,61 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+#######################################
+# Extract a value (Eg, from boundaryField/bump/value)
+# Arguments:
+#    $1 = dictEntry
+#    $2 = inputFile
+#    $3 = outputFile
+# Outputs:
+#    Writes to 'outputFile'
+# Notes:
+#    Only retains values between, but not including the ( ) delimiters.
+#    For example,
+#----
+#    value           nonuniform List<scalar>
+#    110
+#    (
+#    0.0041520092
+#    0.012577691
+#    0.021250264
+#    0.030176962
+#    )
+#    ;
+#######################################
+extractVal()
+{
+    if [ -f "$2" ]
+    then
+        foamDictionary -entry "$1" -value "$2" | \
+            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+            > "$3"
+    else
+        # Or some other tag?
+        echo "Not such file: $2" 1>&2
+        echo "0" > "$3"
+    fi
+}
+
+
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication $(getApplication)
+
+
+endTime=$(foamListTimes -latestTime)
+
+# Create datasets for benchmark comparisons
+extractVal boundaryField.bump.value "$endTime/Cx" Cx.$$
+extractVal boundaryField.bump.value "$endTime/wallShearStress" tau.$$
+extractVal boundaryField.bump.value "$endTime/Cp" cp.$$
+
+echo "# ccx tau_xx tau_yy tau_zz cp" > profiles.dat
+paste -d ' ' Cx.$$ tau.$$ cp.$$ >> profiles.dat
+rm -f Cx.$$ tau.$$ cp.$$
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/setups.orig/common/Allrun-parallel

@@ -0,0 +1,65 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+#######################################
+# Extract a value (Eg, from boundaryField/bump/value)
+# Arguments:
+#    $1 = dictEntry
+#    $2 = inputFile
+#    $3 = outputFile
+# Outputs:
+#    Writes to 'outputFile'
+# Notes:
+#    Only retains values between, but not including the ( ) delimiters.
+#    For example,
+#----
+#    value           nonuniform List<scalar>
+#    110
+#    (
+#    0.0041520092
+#    0.012577691
+#    0.021250264
+#    0.030176962
+#    )
+#    ;
+#######################################
+extractVal()
+{
+    if [ -f "$2" ]
+    then
+        foamDictionary -entry "$1" -value "$2" | \
+            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+            > "$3"
+    else
+        # Or some other tag?
+        echo "Not such file: $2" 1>&2
+        echo "0" > "$3"
+    fi
+}
+
+
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication decomposePar
+
+runParallel $(getApplication)
+
+runApplication reconstructPar
+
+
+endTime=$(foamListTimes -latestTime)
+
+# Create datasets for benchmark comparisons
+extractVal boundaryField.bump.value "$endTime/Cx" Cx.$$
+extractVal boundaryField.bump.value "$endTime/wallShearStress" tau.$$
+extractVal boundaryField.bump.value "$endTime/Cp" cp.$$
+
+echo "# ccx tau_xx tau_yy tau_zz cp" > profiles.dat
+paste -d ' ' Cx.$$ tau.$$ cp.$$ >> profiles.dat
+rm -f Cx.$$ tau.$$ cp.$$
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/setups.orig/common/Allrun.pre

@@ -0,0 +1,19 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+canCompile || exit 0    # Dynamic code
+
+restore0Dir
+
+if [ ! -d constant/polyMesh ]
+then
+    runApplication blockMesh
+
+    runApplication renumberMesh -overwrite -constant
+
+    runApplication checkMesh -allTopology -allGeometry -constant
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kEpsilonPhitF/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kEpsilonPhitF/0.orig/nut

@@ -1 +0,0 @@
-../../common/0.orig/nut

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kEpsilonPhitF/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kEpsilonPhitF/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kEpsilonPhitF/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kOmegaSST/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kOmegaSST/0.orig/nut

@@ -1 +0,0 @@
-../../common/0.orig/nut

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kOmegaSST/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kOmegaSST/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/simpleFoam/bump2D/setups.orig/kOmegaSST/system

@@ -1 +0,0 @@
-../common/system

tutorials/incompressible/simpleFoam/turbulentFlatPlate/Allclean

@@ -3,11 +3,7 @@ cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-cleanCase0
+rm -rf setups
-
-rm -rf 0.orig
-rm -rf system
-rm -rf constant
 rm -rf results
 rm -rf plots
 rm -f setups.orig/common/system/blockMeshDict

tutorials/incompressible/simpleFoam/turbulentFlatPlate/Allrun

@@ -1,7 +1,6 @@
 #!/bin/sh
 cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
-. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
 # settings
@@ -12,9 +11,18 @@ cd "${0%/*}" || exit                                # Run from this directory
     kEpsilon
     "
 
+    # flag to enable computations
+    run=true
+
     # flag to enable computations in parallel mode
     parallel=true
 
+    # flag to enable to use a common mesh
+    common_mesh=true
+
+    # flag to enable to use a common dynamic code
+    common_dynamic_code=true
+
     # operand setups for the wall-normal height of the first-cell centre
     declare -A grading_vs_yp
     #level 5 gradings
@@ -40,99 +48,119 @@ cd "${0%/*}" || exit                                # Run from this directory
 #------------------------------------------------------------------------------
 
 #######################################
-# Extract a value (Eg, from boundaryField/bump/value)
+# Create the given setup
 # Arguments:
-#    $1 = dictEntry
+#    $1 = Path to create the setup
-#    $2 = inputFile
-#    $3 = outputFile
 # Outputs:
-#    Writes to 'outputFile'
+#    Writes info to stdout
-# Notes:
-#    Only retains values between, but not including the ( ) delimiters.
-#    For example,
-#----
-#    value           nonuniform List<scalar>
-#    110
-#    (
-#    0.0041520092
-#    0.012577691
-#    0.021250264
-#    0.030176962
-#    )
-#    ;
 #######################################
-extractVal()
+dry_run_setup() {
-{
+
-    if [ -f "$2" ]
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
+
+    setup="$1"
+    yp="$2"
+    dirSetup="setups/$setup/$yp"
+    dirSetupOrig="setups.orig/$setup"
+    dirOrig="$dirSetupOrig/0.orig"
+    dirConstant="$dirSetupOrig/constant"
+    dirSystem="$dirSetupOrig/system"
+
+    printf "\n# Create the setup: %s %s\n" "$setup" yPlus-"$yp"
+
+    if [ ! -d "$dirSetup" ]
     then
-        foamDictionary -entry "$1" -value "$2" | \
+        mkdir -p "$dirSetup"
-            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+
-            > "$3"
+        cp -aRfL "setups.orig/common/." "$dirSetup"
+        cp -afL "$dirSetupOrig"/All* "$dirSetup" 2>/dev/null || :
+        [ -d "$dirOrig" ] && cp -aRfL "$dirOrig/." "$dirSetup/0.orig"
+        [ -d "$dirConstant" ] && cp -aRfL "$dirConstant/." "$dirSetup/constant"
+        [ -d "$dirSystem" ] && cp -aRfL "$dirSystem/." "$dirSetup/system"
     else
-        # Or some other tag?
+        printf "\n      # Directory %s already exists\n" "$dirSetup"
-        echo "Not such file: $2" 1>&2
+        printf "      # Skipping the creation of a new setup\n"
-        echo "0" > "$3"
     fi
 }
 
 
 #######################################
-# Collect results into a given path
+# Run the given setup
-# and clean the case for the next run
 # Arguments:
-#    $1 = Path to move results
+#    $1 = Path to the setup to run
 # Outputs:
 #    Writes info to stdout
 #######################################
-collect() {
+run_setup() {
 
-    [ $# -eq 0 ] && { echo "Usage: $0 dir-model"; exit 1; }
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
 
-    collection="$1"
+    setup="$1"
+    yp="$2"
+    dirSetup="setups/$setup/$yp"
+    dirResult="results/$setup/$yp"
 
-    dirResult=results/"$collection"
+    dry_run_setup "$setup" "$yp"
-    dirSettings="$dirResult"/settings
+    [ -d results ] || mkdir -p results
+    [ -d results/"$setup" ] || mkdir -p results/"$setup"
+
+    printf "\n# Run the setup: %s %s\n\n" "$setup" yPlus-"$yp"
 
     if [ ! -d "$dirResult" ]
     then
+        cp -Rf "$dirSetup" "$dirResult"
 
-        echo "      # Collecting results and settings into $dirResult"
+        if [ "$common_mesh" = true ]
-
+        then
-        mkdir -p "$dirResult"
+            if [ -d results/mesh ]
-        mkdir -p "$dirSettings"
+            then
-
+                printf "## Copy the common mesh to the setup: %s\n\n" "$setup"
-        endTime=$(foamListTimes -latestTime)
+                cp -Rf results/mesh/polyMesh "$dirResult"/constant/.
-
+            fi
-        # Create datasets for benchmark comparisons
-        extractVal boundaryField.bottomWall.value "$endTime/Cx" Cx.$$
-        extractVal boundaryField.bottomWall.value "$endTime/wallShearStress" tau.$$
-        extractVal boundaryField.bottomWall.value "$endTime/yPlus" yPlus.$$
-
-        echo "# ccx tau_xx tau_yy tau_zz y+" > profiles.dat
-        paste -d ' ' Cx.$$ tau.$$ yPlus.$$ >> profiles.dat
-        rm -f Cx.$$ tau.$$ yPlus.$$
-
-        mv -f $(foamListTimes) "$dirResult"
-        [ -d postProcessing ] && mv -f postProcessing "$dirResult"
-        [ -d processor0 ] && mv -f processor* "$dirResult"
-        mv -f log.* "$dirResult"
-        mv -f profiles.dat "$dirResult"
-        cp -f system/{fv*,controlDict} constant/*Properties "$dirSettings"
-        mv -f 0/ "$dirSettings"
-
-        echo "      # Cleaning up the case"
-
-        cleanTimeDirectories
-        cleanAuxiliary
-        cleanPostProcessing
-
-    else
-
-        echo "      # Directory $dirResult already exists"
-        echo "      # Skipping the computation"
-
         fi
 
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ -d results/dynamicCode ]
+            then
+                printf "## Copy the common dynamic code to the setup: %s\n\n" "$setup"
+                cp -Rf results/dynamicCode "$dirResult"/.
+            fi
+        fi
+
+
+        if [ "$parallel" = true ]
+        then
+            ( cd "$dirResult" && ./Allrun-parallel )
+        else
+            ( cd "$dirResult" && ./Allrun )
+        fi
+
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ ! -d results/mesh ]
+            then
+                printf "\n## Store the mesh of %s as the common mesh\n\n" "$setup"
+                mkdir -p results/mesh
+                cp -Rf "$dirResult"/constant/polyMesh results/mesh/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ ! -d results/dynamicCode ] && [ -d "$dirResult"/dynamicCode ]
+            then
+                printf "\n## Store the dynamic code of %s as the common dynamic code\n\n" "$setup"
+                cp -Rf "$dirResult"/dynamicCode results/.
+            fi
+        fi
+
+
+    else
+        printf "      # Directory %s already exists\n" "$dirResult"
+        printf "      # Skipping the computation of the given setup\n"
+    fi
 }
 
 
@@ -140,7 +168,6 @@ collect() {
 
 for i in "${!grading_vs_yp[@]}"
 do
-
     yp=$i
     grading=${grading_vs_yp[$yp]}
 
@@ -150,60 +177,31 @@ do
 
     for setup in $setups
     do
+        dirSetupOrig="setups.orig/$setup"
 
-        echo ""
+        if [ ! -d "$dirSetupOrig" ]
-        echo "# Computations for the setup and y+: $setup - $yp"
-        echo ""
-
-        dirSetup="setups.orig/$setup"
-
-        if [ ! -d "$dirSetup" ]
         then
-            echo "Setup directory: $dirSetup" \
+            echo "Setup directory: $dirSetupOrig" \
                 "could not be found - skipping execution" 1>&2
-            exit 1
+            continue
         fi
 
-        cp -rfL "$dirSetup/0.orig" .
+        if [ "$run" = true ]
-        cp -rfL "$dirSetup/constant" .
-        cp -rfL "$dirSetup/system" .
-        cp -rf 0.orig/ 0/
-
-        if [ ! -d constant/polyMesh ]
         then
-
+            run_setup "$setup" "$yp"
-            runApplication blockMesh
-
-            runApplication renumberMesh -overwrite -constant
-
-            runApplication checkMesh -allTopology -allGeometry -constant
-
-        fi
-
-        if [ "$parallel" = true ]
-        then
-
-            runApplication decomposePar
-
-            runParallel $(getApplication)
-
-            runApplication reconstructPar
-
         else
-
+            dry_run_setup "$setup" "$yp"
-            runApplication $(getApplication)
-
         fi
-
-        collect "$setup/$yp"
-
     done
 
-    rm -rf 0.orig
+    rm -Rf results/mesh
-    rm -rf constant
-    rm -rf system
-
 done
 
 
-#-----------------------------------------------------------------------------
+if notTest "$@" && [ "$run" = true ]
+then
+    ./plot
+fi
+
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/turbulentFlatPlate/plot

@@ -63,7 +63,7 @@ plot_Rex_vs_Cf() {
 
     plot \
         weighardt(x) t "Weighardt"  w lines lc "red" lw 2, \
-        samples u (\$1 - X0)*Uref/nu:(sqrt(\$2*\$2 + \$3*\$3 + \$4*\$4)/(0.5*Uref*Uref)) \
+        samples u (\$1 - x0)*Uref/nu:(sqrt(\$2*\$2 + \$3*\$3 + \$4*\$4)/(0.5*Uref*Uref)) \
             t "$setup y^+ ${yp}" w l lc "black" lw 2
 PLT_REX_VS_CF
 }
@@ -73,19 +73,19 @@ PLT_REX_VS_CF
 
 # Requires gnuplot
 command -v gnuplot >/dev/null || {
-    echo "FOAM FATAL ERROR: gnuplot not found - skipping graph creation" 1>&2
+    echo "gnuplot not found - skipping graph creation" 1>&2
     exit 1
 }
 
 # Requires awk
 command -v awk >/dev/null || {
-    echo "FOAM FATAL ERROR: awk not found - skipping graph creation" 1>&2
+    echo "awk not found - skipping graph creation" 1>&2
     exit 1
 }
 
 # Check "results" directory
 [ -d "results" ] || {
-    echo "FOAM FATAL ERROR: No results directory found - skipping graph creation" 1>&2
+    echo "No results directory found - skipping graph creation" 1>&2
     exit 1
 }
 
@@ -94,26 +94,26 @@ command -v awk >/dev/null || {
 
 for setup in $setups
 do
-
     for yp in $yps
     do
-
         echo ""
         echo "# Plots for the setup and y+: $setup - $yp"
         echo ""
 
-        dirPlots="plots/$setup/$yp"
+        resultsDir="results/$setup/$yp"
+        [ -d "$resultsDir" ] || {
+            echo "No $resultsDir directory found - skipping graph creation" 1>&2
+            continue
+        }
+
+        dirPlots="plots/$setup"
         [ -d "$dirPlots" ] || mkdir -p "$dirPlots"
 
-        # few manipulations
-        resultsDir="results/$setup/$yp"
         Uref=$(foamDictionary $resultsDir/0/U -entry internalField | sed 's/^.*(\s*\([^ ]*\).*/\1/g')
-        nu=$(foamDictionary $resultsDir/settings/transportProperties -entry nu | sed 's|^.*\s\(.*\);|\1|g')
+        nu=$(foamDictionary $resultsDir/constant/transportProperties -entry nu | sed 's|^.*\s\(.*\);|\1|g')
 
         plot_Rex_vs_Cf "$setup" "$yp" "$Uref" "$nu"
-
     done
-
 done
 
 

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/common/Allclean

@@ -0,0 +1,8 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
+#------------------------------------------------------------------------------
+
+cleanCase0
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/common/Allrun

@@ -0,0 +1,61 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+#######################################
+# Extract a value (Eg, from boundaryField/bump/value)
+# Arguments:
+#    $1 = dictEntry
+#    $2 = inputFile
+#    $3 = outputFile
+# Outputs:
+#    Writes to 'outputFile'
+# Notes:
+#    Only retains values between, but not including the ( ) delimiters.
+#    For example,
+#----
+#    value           nonuniform List<scalar>
+#    110
+#    (
+#    0.0041520092
+#    0.012577691
+#    0.021250264
+#    0.030176962
+#    )
+#    ;
+#######################################
+extractVal()
+{
+    if [ -f "$2" ]
+    then
+        foamDictionary -entry "$1" -value "$2" | \
+            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+            > "$3"
+    else
+        # Or some other tag?
+        echo "Not such file: $2" 1>&2
+        echo "0" > "$3"
+    fi
+}
+
+
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication $(getApplication)
+
+
+endTime=$(foamListTimes -latestTime)
+
+# Create datasets for benchmark comparisons
+extractVal boundaryField.bottomWall.value "$endTime/Cx" Cx.$$
+extractVal boundaryField.bottomWall.value "$endTime/wallShearStress" tau.$$
+extractVal boundaryField.bottomWall.value "$endTime/yPlus" yPlus.$$
+
+echo "# ccx tau_xx tau_yy tau_zz y+" > profiles.dat
+paste -d ' ' Cx.$$ tau.$$ yPlus.$$ >> profiles.dat
+rm -f Cx.$$ tau.$$ yPlus.$$
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/common/Allrun-parallel

@@ -0,0 +1,65 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+#######################################
+# Extract a value (Eg, from boundaryField/bump/value)
+# Arguments:
+#    $1 = dictEntry
+#    $2 = inputFile
+#    $3 = outputFile
+# Outputs:
+#    Writes to 'outputFile'
+# Notes:
+#    Only retains values between, but not including the ( ) delimiters.
+#    For example,
+#----
+#    value           nonuniform List<scalar>
+#    110
+#    (
+#    0.0041520092
+#    0.012577691
+#    0.021250264
+#    0.030176962
+#    )
+#    ;
+#######################################
+extractVal()
+{
+    if [ -f "$2" ]
+    then
+        foamDictionary -entry "$1" -value "$2" | \
+            sed -n '/(/,/)/{ s/[()]//g; /^ *$/d; p}' \
+            > "$3"
+    else
+        # Or some other tag?
+        echo "Not such file: $2" 1>&2
+        echo "0" > "$3"
+    fi
+}
+
+
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication decomposePar
+
+runParallel $(getApplication)
+
+runApplication reconstructPar
+
+
+endTime=$(foamListTimes -latestTime)
+
+# Create datasets for benchmark comparisons
+extractVal boundaryField.bottomWall.value "$endTime/Cx" Cx.$$
+extractVal boundaryField.bottomWall.value "$endTime/wallShearStress" tau.$$
+extractVal boundaryField.bottomWall.value "$endTime/yPlus" yPlus.$$
+
+echo "# ccx tau_xx tau_yy tau_zz y+" > profiles.dat
+paste -d ' ' Cx.$$ tau.$$ yPlus.$$ >> profiles.dat
+rm -f Cx.$$ tau.$$ yPlus.$$
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/common/Allrun.pre

@@ -0,0 +1,19 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+canCompile || exit 0    # Dynamic code
+
+restore0Dir
+
+if [ ! -d constant/polyMesh ]
+then
+    runApplication blockMesh
+
+    runApplication renumberMesh -overwrite -constant
+
+    runApplication checkMesh -allTopology -allGeometry -constant
+fi
+
+#------------------------------------------------------------------------------

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kEpsilon/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kEpsilon/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kEpsilon/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kEpsilon/system

@@ -1 +0,0 @@
-../common/system/

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kOmegaSST/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kOmegaSST/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kOmegaSST/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties

tutorials/incompressible/simpleFoam/turbulentFlatPlate/setups.orig/kOmegaSST/system

@@ -1 +0,0 @@
-../common/system/

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/Allclean

@@ -3,11 +3,7 @@ cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
-cleanCase0
+rm -rf setups
-
-rm -rf 0.orig
-rm -rf system
-rm -rf constant
 rm -rf results
 rm -rf plots
 

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/Allrun

@@ -1,7 +1,6 @@
 #!/bin/sh
 cd "${0%/*}" || exit                                # Run from this directory
 . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
-. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
 #------------------------------------------------------------------------------
 
 # settings
@@ -12,54 +11,131 @@ cd "${0%/*}" || exit                                # Run from this directory
     kOmegaSST
     "
 
+    # flag to enable computations
+    run=true
+
     # flag to enable computations in parallel mode
     parallel=true
 
+    # flag to enable to use a common mesh
+    common_mesh=true
+
+    # flag to enable to use a common dynamic code
+    common_dynamic_code=false
+
 
 #------------------------------------------------------------------------------
+
 #######################################
-# Collect results into a given path
+# Create the given setup
-# and clean the case for the next run
 # Arguments:
-#    $1 = Path to move results
+#    $1 = Path to create the setup
 # Outputs:
 #    Writes info to stdout
 #######################################
-collect() {
+dry_run_setup() {
 
-    [ $# -eq 0 ] && { echo "Usage: $0 dir-model"; exit 1; }
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
 
-    collection="$1"
+    setup="$1"
+    dirSetup="setups/$setup"
+    dirSetupOrig="setups.orig/$setup"
+    dirOrig="$dirSetupOrig/0.orig"
+    dirConstant="$dirSetupOrig/constant"
+    dirSystem="$dirSetupOrig/system"
 
-    dirResult=results/"$collection"
+    printf "\n# Create the setup: %s\n" "$setup"
-    dirSettings="$dirResult"/settings
+
+    if [ ! -d "$dirSetup" ]
+    then
+        mkdir -p "$dirSetup"
+
+        cp -aRfL "setups.orig/common/." "$dirSetup"
+        cp -afL "$dirSetupOrig"/All* "$dirSetup" 2>/dev/null || :
+        [ -d "$dirOrig" ] && cp -aRfL "$dirOrig/." "$dirSetup/0.orig"
+        [ -d "$dirConstant" ] && cp -aRfL "$dirConstant/." "$dirSetup/constant"
+        [ -d "$dirSystem" ] && cp -aRfL "$dirSystem/." "$dirSetup/system"
+    else
+        printf "\n      # Directory %s already exists\n" "$dirSetup"
+        printf "      # Skipping the creation of a new setup\n"
+    fi
+}
+
+
+#######################################
+# Run the given setup
+# Arguments:
+#    $1 = Path to the setup to run
+# Outputs:
+#    Writes info to stdout
+#######################################
+run_setup() {
+
+    [ $# -eq 0 ] && { echo "Usage error: $0"; exit 1; }
+
+    setup="$1"
+    dirSetup="setups/$setup"
+    dirResult="results/$setup"
+
+    dry_run_setup "$setup"
+    [ -d results ] || mkdir -p results
+
+    printf "\n# Run the setup: %s\n\n" "$setup"
 
     if [ ! -d "$dirResult" ]
     then
+        cp -Rf "$dirSetup" "$dirResult"
 
-        echo "      # Collecting results and settings into $dirResult"
+        if [ "$common_mesh" = true ]
+        then
+            if [ -d results/mesh ]
+            then
+                printf "## Copy the common mesh to the setup: %s\n\n" "$setup"
+                cp -Rf results/mesh/polyMesh "$dirResult"/constant/.
+            fi
+        fi
 
-        mkdir -p "$dirResult"
+        if [ "$common_dynamic_code" = true ]
-        mkdir -p "$dirSettings"
+        then
+            if [ -d results/dynamicCode ]
+            then
+                printf "## Copy the common dynamic code to the setup: %s\n\n" "$setup"
+                cp -Rf results/dynamicCode "$dirResult"/.
+            fi
+        fi
 
-        mv -f $(foamListTimes) "$dirResult"
-        [ -d postProcessing ] && mv -f postProcessing "$dirResult"
-        [ -d processor0 ] && mv -f processor* "$dirResult"
-        mv -f log.* "$dirResult"
-        cp -f system/{fv*,controlDict} constant/*Properties "$dirSettings"
-        mv -f 0/ "$dirSettings"
 
-        echo "      # Cleaning up the case"
+        if [ "$parallel" = true ]
+        then
+            ( cd "$dirResult" && ./Allrun-parallel )
+        else
+            ( cd "$dirResult" && ./Allrun )
+        fi
+
+
+        if [ "$common_mesh" = true ]
+        then
+            if [ ! -d results/mesh ]
+            then
+                printf "\n## Store the mesh of %s as the common mesh\n\n" "$setup"
+                mkdir -p results/mesh
+                cp -Rf "$dirResult"/constant/polyMesh results/mesh/.
+            fi
+        fi
+
+        if [ "$common_dynamic_code" = true ]
+        then
+            if [ ! -d results/dynamicCode ] && [ -d "$dirResult"/dynamicCode ]
+            then
+                printf "\n## Store the dynamic code of %s as the common dynamic code\n\n" "$setup"
+                cp -Rf "$dirResult"/dynamicCode results/.
+            fi
+        fi
 
-        cleanTimeDirectories
-        cleanAuxiliary
-        cleanPostProcessing
 
     else
-
+        printf "      # Directory %s already exists\n" "$dirResult"
-        echo "      # Directory $dirResult already exists"
+        printf "      # Skipping the computation of the given setup\n"
-        echo "      # Skipping the computation"
-
     fi
 }
 
@@ -68,54 +144,28 @@ collect() {
 
 for setup in $setups
 do
+    dirSetupOrig="setups.orig/$setup"
 
-    echo ""
+    if [ ! -d "$dirSetupOrig" ]
-    echo "# Computations for the setup: $setup"
-    echo ""
-
-    dirSetup="setups.orig/$setup"
-
-    if [ ! -d "$dirSetup" ]
     then
-        echo "Setup directory: $dirSetup" \
+        echo "Setup directory: $dirSetupOrig" \
              "could not be found - skipping execution" 1>&2
-        exit 1
+        continue
     fi
 
-    cp -rfL "$dirSetup/0.orig" .
+    if [ "$run" = true ]
-    cp -rfL "$dirSetup/constant" .
-    cp -rfL "$dirSetup/system" .
-    cp -rf 0.orig/ 0/
-
-    if [ ! -d constant/polyMesh ]
     then
-
+        run_setup "$setup"
-        runApplication blockMesh
-
-        runApplication renumberMesh -overwrite -constant
-
-        runApplication checkMesh -allTopology -allGeometry -constant
-
-    fi
-
-    if [ "$parallel" = true ]
-    then
-
-        runApplication decomposePar
-
-        runParallel $(getApplication)
-
-        runApplication reconstructPar
-
     else
-
+        dry_run_setup "$setup"
-        runApplication $(getApplication)
-
     fi
-
-    collect "$setup"
-
 done
 
 
+if notTest "$@" && [ "$run" = true ]
+then
+    ./plot
+fi
+
+
 #------------------------------------------------------------------------------

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/plot

@@ -31,7 +31,7 @@ plot_ux_vs_znorm_upstream() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007/Ux-HW-RH-Fig6a"
+    benchmarkFile="resources/dataset/Ux-HW-RH-Fig6a"
     sampleFile="results/$setup/postProcessing/samples_u/$endTime"
     image="plots/$setup/ux_vs_znorm_upstream.png"
 
@@ -72,7 +72,7 @@ plot_ux_vs_znorm_middle() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007/Ux-HW-RH-Fig6a"
+    benchmarkFile="resources/dataset/Ux-HW-RH-Fig6a"
     sampleFile="results/$setup/postProcessing/samples_u/$endTime"
     image="plots/$setup/ux_vs_znorm_middle.png"
 
@@ -113,7 +113,7 @@ plot_ux_vs_znorm_downstream() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007/Ux-HW-RH-Fig6a"
+    benchmarkFile="resources/dataset/Ux-HW-RH-Fig6a"
     sampleFile="results/$setup/postProcessing/samples_u/$endTime"
     image="plots/$setup/ux_vs_znorm_downstream.png"
 
@@ -154,7 +154,7 @@ plot_k_vs_znorm() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007"
+    benchmarkFile="resources/dataset"
     sampleFile="results/$setup/postProcessing/samples_k/$endTime"
     image="plots/$setup/k_vs_znorm.png"
 
@@ -205,7 +205,7 @@ plot_epsilon_vs_znorm() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007/epsilon-HW-RH-Fig6c"
+    benchmarkFile="resources/dataset/epsilon-HW-RH-Fig6c"
     sampleFile="results/$setup/postProcessing/samples_epsilon/$endTime"
     image="plots/$setup/epsilon_vs_znorm.png"
 
@@ -299,7 +299,7 @@ plot_nut_vs_znorm() {
     endTime="$1"
     zMin="$2"
 
-    benchmarkFile="$FOAM_TUTORIALS/resources/dataset/atm-HargreavesWright-2007/"
+    benchmarkFile="resources/dataset"
     sampleFile="results/$setup/postProcessing/samples_nut/$endTime"
     image="plots/$setup/nut_vs_znorm.png"
 
@@ -361,16 +361,20 @@ command -v gnuplot >/dev/null || {
 
 for setup in $setups
 do
-
     echo ""
     echo "# Plots for the setup: $setup"
     echo ""
 
+    [ -d "results/$setup" ] || {
+        echo "No results/$setup directory found - skipping graph creation" 1>&2
+        continue
+    }
+
     dirPlots="plots/$setup"
     [ -d "$dirPlots" ] || mkdir -p "$dirPlots"
 
     endTime=$( \
-        foamDictionary results/$setup/settings/controlDict \
+        foamDictionary results/$setup/system/controlDict \
             -disableFunctionEntries -entry endTime -value \
         )
 
@@ -383,32 +387,23 @@ do
 
     if [ -d "results/$setup/postProcessing/samples_k" ]
     then
-
         plot_k_vs_znorm "$endTime" "$zMin"
-
     fi
 
     if [ -d "results/$setup/postProcessing/samples_epsilon" ]
     then
-
         plot_epsilon_vs_znorm "$endTime" "$zMin"
-
     fi
 
     if [ -d "results/$setup/postProcessing/samples_omega" ]
     then
-
         plot_omega_vs_znorm "$endTime" "$zMin"
-
     fi
 
     if [ -d "results/$setup/postProcessing/samples_nut" ]
     then
-
         plot_nut_vs_znorm "$endTime" "$zMin"
-
     fi
-
 done
 
 

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/common/Allclean

@@ -0,0 +1,8 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/CleanFunctions      # Tutorial clean functions
+#------------------------------------------------------------------------------
+
+cleanCase0
+
+#------------------------------------------------------------------------------

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/common/Allrun

@@ -0,0 +1,10 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication $(getApplication)
+
+#------------------------------------------------------------------------------

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/common/Allrun-parallel

@@ -0,0 +1,14 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+./Allrun.pre
+
+runApplication decomposePar
+
+runParallel $(getApplication)
+
+runApplication reconstructPar
+
+#------------------------------------------------------------------------------

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/common/Allrun.pre

@@ -0,0 +1,17 @@
+#!/bin/sh
+cd "${0%/*}" || exit                                # Run from this directory
+. ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions        # Tutorial run functions
+#------------------------------------------------------------------------------
+
+restore0Dir
+
+if [ ! -d constant/polyMesh ]
+then
+    runApplication blockMesh
+
+    runApplication renumberMesh -overwrite -constant
+
+    runApplication checkMesh -allTopology -allGeometry -constant
+fi
+
+#------------------------------------------------------------------------------

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/0.orig/U

@@ -1 +0,0 @@
-../../common/0.orig/U

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/0.orig/include

@@ -1 +0,0 @@
-../../common/0.orig/include

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/0.orig/k

@@ -1 +0,0 @@
-../../common/0.orig/k

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/0.orig/nut

@@ -1 +0,0 @@
-../../common/0.orig/nut

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/0.orig/p

@@ -1 +0,0 @@
-../../common/0.orig/p

tutorials/verificationAndValidation/atmosphericModels/atmDownstreamDevelopment/setups.orig/kEpsilon/constant/transportProperties

@@ -1 +0,0 @@
-../../common/constant/transportProperties