zhyang-dev/openfoam
1
0
Fork 0
mirror of https://develop.openfoam.com/Development/openfoam.git synced 2025-11-28 03:28:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

COMP: cvMesh and cv2DMesh removed

Browse Source
This commit is contained in:
laurence
2013-01-07 16:08:56 +00:00
parent a13d9b50d0
commit e4c1409679
246 changed files with 68 additions and 104022 deletions
Download Patch File Download Diff File Expand all files Collapse all files

52
tutorials/mesh/cvMesh/simpleShapes/system/collapseDict
View File

@ -1,52 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
root "";
case "";
instance "";
local "";
class dictionary;
object collapseDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
collapseEdgesCoeffs
{
minimumEdgeLength 1e-6;
maximumMergeAngle 180;
reductionFactor 0.5;
}
collapseFacesCoeffs
{
initialFaceLengthFactor 0.5;
reductionFactor 0.5;
allowEarlyCollapseToPoint on;
allowEarlyCollapseCoeff 0.2;
guardFraction 0.1;
maxCollapseFaceToPointSideLengthCoeff 0.3;
}
meshQualityCoeffs
{
#include "meshQualityDict";
maximumIterations 30;
maximumSmoothingIterations 1;
maxPointErrorCount 5;
}
// ************************************************************************* //

54
tutorials/mesh/cvMesh/simpleShapes/system/controlDict
View File

@ -1,54 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
root "";
case "";
instance "";
local "";
class dictionary;
object controlDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
startFrom latestTime;
startTime 0;
stopAt endTime;
endTime 80;
deltaT 1;
writeControl timeStep;
writeInterval 80; // 10 to see the meshing steps
purgeWrite 0;
writeFormat ascii;
writePrecision 10;
writeCompression uncompressed;
timeFormat general;
timePrecision 6;
runTimeModifiable yes;
// ************************************************************************* //

371
tutorials/mesh/cvMesh/simpleShapes/system/cvMeshDict
View File

@ -1,371 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object cvMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
/*
Control dictionary for cvMesh - polyhedral mesh generator.
cvMesh phases:
1. fill volume with initial points (initialPoints subdictionary). An option
is to reread from previous set of points.
2. internal point motion (motionControl subdictionary)
3. every once in a while add point duplets/triplets to conform to
surfaces and features (surfaceConformation subdictionary)
4. back to 2
5. construct polyMesh.
- filter (polyMeshFiltering subdictionary)
- check (meshQualityControls subdictionary) and undo filtering
See also cvControls.H in the conformalVoronoiMesh library
*/
// Important:
// ----------
// Any scalar with a name <name>Coeff specifies a value that will be implemented
// as a faction of the local target cell size
// Any scalar with a name <name>Size specifies an absolute size.
// Geometry. Definition of all surfaces. All surfaces are of class
// searchableSurface.
// Surfaces need to be (almost) closed - use closedTriSurfaceMesh
// if they are not topologically closed. Surfaces need to be oriented so
// the space to be meshed is always on the inside of all surfaces. Use e.g.
// surfaceOrient.
geometry
{
// Internal shape
coneAndSphere_clean_orient.obj
{
name coneAndSphere;
type triSurfaceMesh;
}
// Outside of domain
domain_clean_orient.stl
{
name domain;
type triSurfaceMesh;
}
}
// Controls for conforming to the surfaces.
surfaceConformation
{
// A point inside surfaces that is inside mesh.
locationInMesh (0 -0.5 0);
// How far apart are point-duplets generated. Balance this between
// - very low distance: little chance of interference from other
// surfaces
// - largish distance: less non-orthogonality in final cell
// (circumcentre far away from centroid)
pointPairDistanceCoeff 0.1;
// Mixed feature edges - both inside and outside edges. Recreated
// by inserting triplets of points to recreate a single edge. Done for
// all edges emanating from point. triplets of points get inserted
// mixedFeaturePointPPDistanceCoeff distance away from feature point.
mixedFeaturePointPPDistanceCoeff 5.0;
// Distance to a feature point within which surface and edge
// conformation points are excluded - fraction of the local target
// cell size
featurePointExclusionDistanceCoeff 0.6;
// Distance to an existing feature edge conformation location
// within which other edge conformation location are excluded -
// fraction of the local target cell size
featureEdgeExclusionDistanceCoeff 0.6;
// Optimisation: do not check for surface intersection (of dual edges)
// for points near to surface.
surfaceSearchDistanceCoeff 2.5;
// Maximum allowable protrusion through the surface before
// conformation points are added - fraction of the local target
// cell size. These small protusions are (hopefully) done by mesh filtering
// instead.
maxSurfaceProtrusionCoeff 0.1;
// If feature edge with large angle (so more than 125 degrees) introduce
// additional points to create two half angled cells (= mitering).
maxQuadAngle 125;
// Frequency to redo surface conformation (expensive).
surfaceConformationRebuildFrequency 10;
// Specialised feature point handling
specialiseFeaturePoints on;
// Initial and intermediate controls
conformationControls
{
// We've got a point poking through the surface. Don't do any
// surface conformation if near feature edge (since feature edge
// conformation should have priority)
// distance to search for near feature edges
edgeSearchDistCoeff 2;
// Proximity to a feature edge where a surface hit is
// not created, only the edge conformation is created
// - fraction of the local target cell size. Coarse
// conformation, initial protrusion tests.
surfacePtReplaceDistCoeff 0.5;
surfacePtExclusionDistanceCoeff 0.5;
// Stop either at maxIterations or if the number of surface pokes
// is very small (iterationToInitialHitRatioLimit * initial number)
// Note: perhaps iterationToInitialHitRatioLimit should be absolute
// count?
maxIterations 15;
iterationToInitialHitRatioLimit 0.001;
}
// Geometry to mesh to
geometryToConformTo
{
coneAndSphere
{
featureMethod extendedFeatureEdgeMesh;
extendedFeatureEdgeMesh "coneAndSphere_clean_orient.extendedFeatureEdgeMesh";
}
domain
{
featureMethod extendedFeatureEdgeMesh;
extendedFeatureEdgeMesh "domain_clean_orient.extendedFeatureEdgeMesh";
}
}
additionalFeatures {}
}
// Controls for seeding initial points and general control of the target
// cell size (used everywhere)
initialPoints
{
// Do not place point closer than minimumSurfaceDistanceCoeff
// to the surface. Is fraction of local target cell size (see below)
minimumSurfaceDistanceCoeff 0.55;
initialPointsMethod autoDensity;
// initialPointsMethod uniformGrid;
// initialPointsMethod bodyCentredCubic;
// initialPointsMethod pointFile;
// Take boundbox of all geometry. Samples with this box. If too much
// samples (due to target cell size) in box split box.
autoDensityCoeffs
{
minCellSizeLimit 0.1;
// Initial number of refinement levels. Needs to be enough to pick
// up features due to size ratio. If not enough it will take longer
// to determine point seeding.
minLevels 4;
// Split box if ratio of min to max cell size larger than maxSizeRatio
maxSizeRatio 5.0;
// Per box sample 3x3x3 internally
sampleResolution 3;
// Additionally per face of the box sample 3
surfaceSampleResolution 3;
}
uniformGridCoeffs
{
// Absolute cell size.
initialCellSize 0.0015;
randomiseInitialGrid yes;
randomPerturbationCoeff 0.02;
}
bodyCentredCubicCoeffs
{
initialCellSize 0.0015;
randomiseInitialGrid no;
randomPerturbationCoeff 0.1;
}
pointFileCoeffs
{
// Reads points from file. Still rejects points that are too
// close to the surface (minimumSurfaceDistanceCoeff) or on the
// wrong side of the surfaces.
pointFile "constant/internalDelaunayVertices";
}
}
// Control size of voronoi cells i.e. distance between points. This
// determines the target cell size which is used everywhere.
// It determines the cell size given a location. It then uses all
// the rules
// - defaultCellSize
// - cellSizeControlGeometry
// to determine target cell size. Rule with highest priority wins. If same
// priority smallest cell size wins.
motionControl
{
// Absolute cell size of back ground mesh. This is the maximum cell size.
defaultCellSize 0.1;
shapeControlFunctions
{
coneAndSphere
{
type searchableSurfaceControl;
priority 1;
mode bothSides;
surfaceCellSizeFunction uniformValue;
uniformValueCoeffs
{
surfaceCellSize 0.075;
}
cellSizeFunction uniform;
uniformCoeffs
{}
}
domain
{
type searchableSurfaceControl;
priority 1;
mode bothSides;
surfaceCellSizeFunction uniformValue;
uniformValueCoeffs
{
surfaceCellSize $defaultCellSize;
}
cellSizeFunction uniform;
uniformCoeffs
{}
}
}
cellAspectRatioControl
{
aspectRatio 1.0;
aspectRatioDirection (0 0 0);
}
// Underrelaxation for point motion. Simulated annealing: starts off at 1
// and lowers to 0 (at simulation endTime) to converge points.
// adaptiveLinear is preferred choice.
// Points move by e.g. 10% of tet size.
relaxationModel adaptiveLinear; //rampHoldFall
adaptiveLinearCoeffs
{
relaxationStart 1.0;
relaxationEnd 0.0;
}
// Output lots and lots of .obj files
objOutput no;
// Timing and memory usage.
timeChecks no;
// Number of rays in plane parallel to nearest surface. Used to detect
// next closest surfaces. Used to work out alignment (three vectors)
// to surface.
// Note that only the initial points (from the seeding) calculate this
// information so if these are not fine enough the alignment will
// not be correct. (any points added during the running will lookup
// this information from the nearest initial point since it is
// expensive)
alignmentSearchSpokes 36;
// For each delaunay edge (between two vertices, becomes
// the Voronoi face normal) snap to the alignment direction if within
// alignmentAcceptanceAngle. Slightly > 45 is a good choice - prevents
// flipping.
alignmentAcceptanceAngle 48;
// How often to rebuild the alignment info (expensive)
sizeAndAlignmentRebuildFrequency 20;
// When to insert points. Not advisable change to
// these settings.
pointInsertionCriteria
{
// If edge larger than 1.75 target cell size
// (so tets too large/stretched) insert point
cellCentreDistCoeff 1.75;
// Do not insert point if voronoi face (on edge) very small.
faceAreaRatioCoeff 0.0025;
// Insert point only if edge closely aligned to local alignment
// direction.
acceptanceAngle 21.5;
}
// Opposite: remove point if mesh too compressed. Do not change these
// settings.
pointRemovalCriteria
{
cellCentreDistCoeff 0.65;
}
// How to determine the point motion. All edges got some direction.
// Sum all edge contributions to determine point motion. Weigh by
// face area so motion is preferentially determined by large faces
// (or more importantly ignore contribution from small faces).
// Do not change these settings.
faceAreaWeightModel piecewiseLinearRamp;
piecewiseLinearRampCoeffs
{
lowerAreaFraction 0.5;
upperAreaFraction 1.0;
}
}
// After simulation, when converting to polyMesh, filter out small faces/edges.
// Do not change. See cvControls.H
polyMeshFiltering
{
filterEdges on;
filterFaces on;
writeTetDualMesh false;
}
#include "meshQualityDict";
// ************************************************************************* //

55
tutorials/mesh/cvMesh/simpleShapes/system/fvSchemes
View File

@ -1,55 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object fvSchemes;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
d2dt2Schemes
{
default steadyState;
}
gradSchemes
{
default Gauss cubic;
}
divSchemes
{
default Gauss cubic;
}
laplacianSchemes
{
default Gauss linear uncorrected;
}
interpolationSchemes
{
default cubic;
}
snGradSchemes
{
default uncorrected;
}
fluxRequired
{
default no;
D ;
}
// ************************************************************************* //

41
tutorials/mesh/cvMesh/simpleShapes/system/fvSolution
View File

@ -1,41 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object fvSolution;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
solvers
{
"(D|Dcorr)"
{
solver GAMG;
tolerance 1e-06;
relTol 0.99;
smoother GaussSeidel;
cacheAgglomeration true;
nCellsInCoarsestLevel 6;
agglomerator faceAreaPair;
mergeLevels 1;
}
}
stressAnalysis
{
nCorrectors 1;
D 1e-10;
accelerationFactor 2;
}
// ************************************************************************* //

73
tutorials/mesh/cvMesh/simpleShapes/system/meshQualityDict
View File

@ -1,73 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
root "";
case "";
instance "";
local "";
class dictionary;
object meshQualityDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
//- Maximum non-orthogonality allowed. Set to 180 to disable.
maxNonOrtho 65;
//- Max skewness allowed. Set to <0 to disable.
maxBoundarySkewness 50;
maxInternalSkewness 10;
//- Max concaveness allowed. Is angle (in degrees) below which concavity
// is allowed. 0 is straight face, <0 would be convex face.
// Set to 180 to disable.
maxConcave 80;
//- Minimum quality of the tet formed by the face-centre
// and variable base point minimum decomposition triangles and
// the cell centre. This has to be a positive number for tracking
// to work. Set to very negative number (e.g. -1E30) to
// disable.
// <0 = inside out tet,
// 0 = flat tet
// 1 = regular tet
minTetQuality 1e-30;
//- Minimum pyramid volume. Is absolute volume of cell pyramid.
// Set to a sensible fraction of the smallest cell volume expected.
// Set to very negative number (e.g. -1E30) to disable.
minVol 0;
//- Minimum face area. Set to <0 to disable.
minArea -1;
//- Minimum face twist. Set to <-1 to disable. dot product of face normal
//- and face centre triangles normal
minTwist 0.001;
//- minimum normalised cell determinant
//- 1 = hex, <= 0 = folded or flattened illegal cell
minDeterminant 0.001;
//- minFaceWeight (0 -> 0.5)
minFaceWeight 0.02;
//- minVolRatio (0 -> 1)
minVolRatio 0.01;
//must be >0 for Fluent compatibility
minTriangleTwist -1;
// ************************************************************************* //

57
tutorials/mesh/cvMesh/simpleShapes/system/surfaceFeatureExtractDict
View File

@ -1,57 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object surfaceFeatureExtractDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
coneAndSphere_clean_orient.obj
{
extractionMethod extractFromSurface;
extractFromSurfaceCoeffs
{
// Mark edges whose adjacent surface normals are at an angle less
// than includedAngle as features
// - 0 : selects no edges
// - 180: selects all edges
includedAngle 125;
}
// Write options
// Write features to obj format for postprocessing
writeObj no;
}
domain_clean_orient.stl
{
extractionMethod extractFromSurface;
extractFromSurfaceCoeffs
{
// Mark edges whose adjacent surface normals are at an angle less
// than includedAngle as features
// - 0 : selects no edges
// - 180: selects all edges
includedAngle 125;
}
// Write options
// Write features to obj format for postprocessing
writeObj no;
}
// ************************************************************************* //

148
tutorials/mesh/cvMesh/simpleShapes/system/topoSetDict
View File

@ -1,148 +0,0 @@
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: dev |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object topoSetDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
actions
(
{
name z;
type cellSet;
action new;
source boxToCell;
sourceInfo
{
box (-100 -100 0)(100 100 100);
}
}
{
name zf;
type faceSet;
action new;
source cellToFace;
sourceInfo
{
set z;
option all;
}
}
{
name z;
type cellSet;
action invert;
}
{
name zf;
type faceSet;
action subset;
source cellToFace;
sourceInfo
{
set z;
option all;
}
}
// ~~~~~~~~~~~~~~~~ //
{
name y;
type cellSet;
action new;
source boxToCell;
sourceInfo
{
box (-100 0.1 -100)(100 100 100);
}
}
{
name yf;
type faceSet;
action new;
source cellToFace;
sourceInfo
{
set y;
option all;
}
}
{
name y;
type cellSet;
action invert;
}
{
name yf;
type faceSet;
action subset;
source cellToFace;
sourceInfo
{
set y;
option all;
}
}
// ~~~~~~~~~~~~~~~~ //
{
name x;
type cellSet;
action new;
source boxToCell;
sourceInfo
{
box (0.3 -100 -100)(100 100 100);
}
}
{
name xf;
type faceSet;
action new;
source cellToFace;
sourceInfo
{
set x;
option all;
}
}
{
name x;
type cellSet;
action invert;
}
{
name xf;
type faceSet;
action subset;
source cellToFace;
sourceInfo
{
set x;
option all;
}
}
);
// ************************************************************************* //