- This provides a mechanism for moving mesh patches based on external
input (eg, from an external structures solver). The patch points are
influenced by the position and rotation of the lumped points.
BC: lumpedPointDisplacementPointPatchVectorField
Controlling mechanisms:
- externalCoupler
for coordinating the master/slave
- lumpedPointMovement
manages the patch-points motion, but also for extracting forces/moments
- lumpedPointState
represents the positions/rotations of the controlling points
Utils:
- lumpedPointZones
diagnostic for visualizing the correspondence between controlling
points and patch faces
- lumpedPointMovement
Test that the patch motion is as desired without invoking moveMesh.
With the -slave option, return items from a precalculated table
for the lumpedPointDisplacementPointPatchVectorField BC.
- simply removing the lock file on termination provides insufficient
information for the external application to know if it should take
over again or if OpenFOAM has terminated. Instead the "status=done"
content is now used by default.
Community contribution from Johan Roenby, DHI
IsoAdvector is a geometric Volume-of-Fluid method for advection of a
sharp interface between two incompressible fluids. It works on both
structured and unstructured meshes with no requirements on cell shapes.
IsoAdvector is as an alternative choice for the interface compression
treatment with the MULES limiter implemented in the interFoam family
of solvers.
The isoAdvector concept and code was developed at DHI and was funded
by a Sapere Aude postdoc grant to Johan Roenby from The Danish Council
for Independent Research | Technology and Production Sciences (Grant-ID:
DFF - 1337-00118B - FTP).
Co-funding is also provided by the GTS grant to DHI from the Danish
Agency for Science, Technology and Innovation.
The ideas behind and performance of the isoAdvector scheme is
documented in:
Roenby J, Bredmose H, Jasak H. 2016 A computational method for sharp
interface advection. R. Soc. open sci. 3: 160405.
[http://dx.doi.org/10.1098/rsos.160405](http://dx.doi.org/10.1098/rsos.160405)
Videos showing isoAdvector's performance with a number of standard
test cases can be found in this youtube channel:
https://www.youtube.com/channel/UCt6Idpv4C8TTgz1iUX0prAA
Project contributors:
* Johan Roenby <jro@dhigroup.com> (Inventor and main developer)
* Hrvoje Jasak <hrvoje.jasak@fsb.hr> (Consistent treatment of
boundary faces including processor boundaries, parallelisation,
code clean up
* Henrik Bredmose <hbre@dtu.dk> (Assisted in the conceptual
development)
* Vuko Vukcevic <vuko.vukcevic@fsb.hr> (Code review, profiling,
porting to foam-extend, bug fixing, testing)
* Tomislav Maric <tomislav@sourceflux.de> (Source file
rearrangement)
* Andy Heather <a.heather@opencfd.co.uk> (Integration into OpenFOAM
for v1706 release)
See the integration repository below to see the full set of changes
implemented for release into OpenFOAM v1706
https://develop.openfoam.com/Community/Integration-isoAdvector
- provide single parameter constructor for which the rotation direction
is determined based on the size/sign of the axis components.
The direction is aligned with one of the global axes.
- expose setTransform as a public method to allow the user to reset
the axesRotation if desired.
Adding special alphaCourantNo for overlaping
Adding bounded term to UEq.H for overInterDyMFoam
Changing to NO_WRITE for the cellMask field
Changing twoSimpleRotors tutorial to open domain
