The polyMesh construct-from-components will now ignore
the readOpt for the supplied primitives as before.
This again re-allows READ_IF_PRESENT for fv* in
combination with supplied primitives.
Changed IO flag so that new mesh is created
- was using old 'faces', 'owner' etc but then used the new patch starts
Corrected logic for contMap in polyTopoChange
- previously hard-coded, now adjustable within PDRsetFieldsDict
// Change some predefined patch names
patchNames
{
ground ground;
outer outer;
}
ENH: additions to PDRutils, improve comments
- expose enumerated expansion names and gridControl (PDRblock).
Not commonly needed, but useful to have access when defining
other grid generators
TUT: update PDRsetFieldsDict and tutorials to use "ground"
- remove tutorial references to unused types and legacy obstacles
- use "ground" for the boundary conditions instead of "seaGround".
Consistent with PDRblockMesh
1) PhaseIncompressibleTurbulenceModel class was changed to use
uniform alpha and non-uniform rho templates. This fits the need
of incompressible two phase turbulence models.
2) A new type DPMIncompressibleTurbulenceModel was created for
non-uniform alpha and uniform rho. It is used in single phase flows
in DPM solvers where alpha represents the volumen occupancy.
3) A new type incompressibleRhoTurbulenceModel was created where
non-uniform rho is allowed.
4) A new base templated turbulent class for two-phase VOF named
VoFphaseTurbulentTransportModel was implemented which is created
templating on PhaseIncompressibleTurbulenceModel and
incompressibleRhoTurbulenceModel
5) In order to make the chnage to rho based VOF turbulence a help
class was added incompressibleInterPhaseTransportModel templated
on the mixing.
In reconstruct mode redistributePar will have
- master read undecomposed mesh
- slaves construct dummy mesh (0 faces/points etc.)
but correct patches and zones
so all processors have two valid meshes. This was
all handled inside fvMeshTools::newMesh and this
was behaving differently.
The SPL can now be weighted according to the new 'SPLweighting' entry
that can be set to:
- none: no weighting
- dBA : dB(A)
- dBB : dB(B)
- dBC : dB(C)
- dBD : dB(D)
This commit also includes code refactoring of the noiseModel class to
remove the dependency on noiseFFT/declutter.
This adds a 'geometry' scheme section to the system/fvSchemes:
geometry
{
type highAspectRatio;
}
These 'fvGeometryMethod's are used to calculate
- deltaCoeffs
- nonOrthoCoeffs
etc and can even modify the basic face/cellCentres calculation.
- New solver: `acousticFoam`
- New base finite-area region class: `regionFaModel`
- New base shell model classes:
- `vibrationShellModel`
- `thermalShellModel`
- New shell models:
- A vibration-shell model: `KirchhoffShell`
- A thermal-shell model: `thermalShell`
- New finite-area/finite-volume boundary conditions:
- `clampedPlate`
- `timeVaryingFixedValue`
- `acousticWaveTransmissive`
- New base classes for `fvOption` of finite-area methods: `faOption`
- New `faOption`s:
- `contactHeatFluxSource`
- `externalFileSource`
- `externalHeatFluxSource`
- `jouleHeatingSource`
- New tutorial: `compressible/acousticFoam/obliqueAirJet`
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- bundles selection and control parameters used when creating
iso-surfaces. This simplifies selection and specification
- drop old compatibility handling of "cell" as a bool
- harmonize filter/regularisation flags for iso-surface
- for dictionary input, accept "isoMethod" and "isoAlgorithm" as being
synonymous. Using "isoMethod" is less subject to typing errors.
- robuster matching behaviour when encountering paths that themselves
contain the word "processor" in them. For example,
"/path/processor0generation2/case1/processor10/system"
will now correctly match on processor10 instead of failing.
- use procRangeType for encapsulating the processor ranges
- provision for information of distributed vs non-distributed roots.
The information is currently available from the initial setup, but
can useful to access directly within fileOperation.
STYLE: modernize list iteration
- the NullObject singleton can also be cast to a bitSet
(sufficient size and bit-pattern). Useful for places that
need to hold a reference on construction
- (tet, pyr, hex) can be identified from their number of faces
and vertices. For these common shapes can use static `test()`
method instead of the virtual isA() method.
This is much cheaper for calling on an individual basis since
it avoids the overhead of constructing an object.
ENH: tetCell edge/reverseEdge (already had tetEdge)
- change to a templated implementation instead of relying on
the container's writeList() method.
This inlines the generation while also adding the flexibility to
define different delimiters (at compile time) without the
performance penalty of passing run-time parameters.
- deprecate get(key, deflt) in favour of lookup(key, deflt).
Method name compatibility with HashTable.
- deprecate operator().
The meaning is too opaque and equally served by other means:
- use get(key) instead of operator()(key).
Const access whereas HashTable::operator()(key)
creates missing entry.
- lookup(key, deflt) - instead of operator()(key, deflt).
Const access whereas HashTable::operator()(key, deflt)
creates a missing entry.
- make Enum iterable to allow participation in range-for etc.
- non-uniform offsets are generated due to truncation errors,
which can lead to problems later on (e.g. redistributePar).
Detect if the offsets are close to being uniform.
