Often we want to copy a field and replace boundary conditions, e.g. change type
to calculated for some patches. This has typically been achieved by creating a
word list of new patch types which are then fed through to the fvPatchField::New
factory method. This is OK for types that require no additional input (usually
from dictionary) but leaves other more complex types partially
constructed/usable.
The new constructor clones all BCs except those with indices specified, for
which the fvPatchField::New method is called for the supplied patch field type.
- silently deprecate 'startsWith', 'endsWith' methods
(added in 2016: 2b14360662), in favour of
'starts_with', 'ends_with' methods, corresponding to C++20 and
allowing us to cull then in a few years.
- handle single character versions of starts_with, ends_with.
- add single character version of removeEnd and silently deprecate
removeTrailing which did the same thing.
- drop the const versions of removeRepeated, removeTrailing.
Unused and with potential confusion.
STYLE: use shrink_to_fit(), erase()
Integration of VOF MULES new interfaces. Update of VOF solvers and all instances
of MULES in the code.
Integration of reactingTwoPhaseEuler and reactingMultiphaseEuler solvers and sub-models
Updating reactingEuler tutorials accordingly (most of them tested)
New eRefConst thermo used in tutorials. Some modifications at thermo specie level
affecting mostly eThermo. hThermo mostly unaffected
New chtMultiRegionTwoPhaseEulerFoam solver for quenching and tutorial.
Phases sub-models for reactingTwoPhaseEuler and reactingMultiphaseEuler were moved
to src/phaseSystemModels/reactingEulerFoam in order to be used by BC for
chtMultiRegionTwoPhaseEulerFoam.
Update of interCondensatingEvaporatingFoam solver.
- Global functions are unary or combining binary functions, which are
defined in MinMax.H (MinMaxOps.H).
There are also global reduction functions (gMinMax, gMinMaxMag)
as well as supporting 'Op' classes:
- minMaxOp, minMaxEqOp, minMaxMagOp, minMaxMagEqOp
Since the result of the functions represents a content reduction
into a single MinMax<T> value (a min/max pair), field operations
returning a field simply do not make sense.
- Implemented for lists, fields, field-fields, DimensionedField,
GeometricField (parallel reducing, with boundaries).
- Since the minMax evaluates during its operation, this makes it more
efficient for cases where both min/max values are required since it
avoids looping twice through the data.
* Changed GeometricField writeMinMax accordingly.
ENH: clip as field function
- clipping provides a more efficient, single-pass operation to apply
lower/upper limits on single or multiple values.
Examples,
scalarMinMax limiter(0, 1);
limiter.clip(value)
-> returns a const-ref to the value if within the range, or else
returns the appropriate lower/upper limit
limiter.inplaceClip(value)
-> Modifies the value if necessary to be within lower/upper limit
Function calls
clip(value, limiter)
-> returns a copy after applying lower/upper limit
clip(values, limiter)
-> returns a tmp<Field> of clipped values
- can now things like ref(), boundaryFieldRef(), primitiveFieldRef()
with an optional argument that avoids triggering any update events
Instead of
Field<Type>& iF = const_cast<Field<Type>&>(fld.primitiveField());
can now write
Field<Type>& iF = fld.primitiveFieldRef(false);
or simply
auto& iF = fld.primitiveFieldRef(false);
- instead of dict.lookup(name) >> val;
can use dict.readEntry(name, val);
for checking of input token sizes.
This helps catch certain types of input errors:
{
key1 ; // <- Missing value
key2 1234 // <- Missing ';' terminator
key3 val;
}
STYLE: readIfPresent() instead of 'if found ...' in a few more places.
- when constructing dimensioned fields that are to be zero-initialized,
it is preferrable to use a form such as
dimensionedScalar(dims, Zero)
dimensionedVector(dims, Zero)
rather than
dimensionedScalar("0", dims, 0)
dimensionedVector("zero", dims, vector::zero)
This reduces clutter and also avoids any suggestion that the name of
the dimensioned quantity has any influence on the field's name.
An even shorter version is possible. Eg,
dimensionedScalar(dims)
but reduces the clarity of meaning.
- NB: UniformDimensionedField is an exception to these style changes
since it does use the name of the dimensioned type (instead of the
regIOobject).
Improve alignment of its behaviour with std::shared_ptr
- element_type typedef
- swap, reset methods
* additional reference access methods:
cref()
returns a const reference, synonymous with operator().
This provides a more verbose alternative to using the '()' operator
when that is desired.
Mnemonic: a const form of 'ref()'
constCast()
returns a non-const reference, regardless if the underlying object
itself is a managed pointer or a const object.
This is similar to ref(), but more permissive.
Mnemonic: const_cast<>
Using the constCast() method greatly reduces the amount of typing
and reading. And since the data type is already defined via the tmp
template parameter, the type deduction is automatically known.
Previously,
const tmp<volScalarField>& tfld;
const_cast<volScalarField&>(tfld()).rename("name");
volScalarField& fld = const_cast<volScalarField&>(tfld());
Now,
tfld.constCast().rename("name");
auto& fld = tfld.constCast();
--
BUG: attempts to move tmp value that may still be shared.
- old code simply checked isTmp() to decide if the contents could be
transfered. However, this means that the content of a shared tmp
would be removed, leaving other instances without content.
* movable() method checks that for a non-null temporary that is
unique (not shared).
for consistency with reactingTwoPhaseEulerFoam and to ensure correct operation
of models requiring formal boundedness of phase-fractions.
Resolves bug-report https://bugs.openfoam.org/view.php?id=2589
Original commit message:
------------------------
Parallel IO: New collated file format
When an OpenFOAM simulation runs in parallel, the data for decomposed fields and
mesh(es) has historically been stored in multiple files within separate
directories for each processor. Processor directories are named 'processorN',
where N is the processor number.
This commit introduces an alternative "collated" file format where the data for
each decomposed field (and mesh) is collated into a single file, which is
written and read on the master processor. The files are stored in a single
directory named 'processors'.
The new format produces significantly fewer files - one per field, instead of N
per field. For large parallel cases, this avoids the restriction on the number
of open files imposed by the operating system limits.
The file writing can be threaded allowing the simulation to continue running
while the data is being written to file. NFS (Network File System) is not
needed when using the the collated format and additionally, there is an option
to run without NFS with the original uncollated approach, known as
"masterUncollated".
The controls for the file handling are in the OptimisationSwitches of
etc/controlDict:
OptimisationSwitches
{
...
//- Parallel IO file handler
// uncollated (default), collated or masterUncollated
fileHandler uncollated;
//- collated: thread buffer size for queued file writes.
// If set to 0 or not sufficient for the file size threading is not used.
// Default: 2e9
maxThreadFileBufferSize 2e9;
//- masterUncollated: non-blocking buffer size.
// If the file exceeds this buffer size scheduled transfer is used.
// Default: 2e9
maxMasterFileBufferSize 2e9;
}
When using the collated file handling, memory is allocated for the data in the
thread. maxThreadFileBufferSize sets the maximum size of memory in bytes that
is allocated. If the data exceeds this size, the write does not use threading.
When using the masterUncollated file handling, non-blocking MPI communication
requires a sufficiently large memory buffer on the master node.
maxMasterFileBufferSize sets the maximum size in bytes of the buffer. If the
data exceeds this size, the system uses scheduled communication.
The installation defaults for the fileHandler choice, maxThreadFileBufferSize
and maxMasterFileBufferSize (set in etc/controlDict) can be over-ridden within
the case controlDict file, like other parameters. Additionally the fileHandler
can be set by:
- the "-fileHandler" command line argument;
- a FOAM_FILEHANDLER environment variable.
A foamFormatConvert utility allows users to convert files between the collated
and uncollated formats, e.g.
mpirun -np 2 foamFormatConvert -parallel -fileHandler uncollated
An example case demonstrating the file handling methods is provided in:
$FOAM_TUTORIALS/IO/fileHandling
The work was undertaken by Mattijs Janssens, in collaboration with Henry Weller.
These new names are more consistent and logical because:
primitiveField():
primitiveFieldRef():
Provides low-level access to the Field<Type> (primitive field)
without dimension or mesh-consistency checking. This should only be
used in the low-level functions where dimensional consistency is
ensured by careful programming and computational efficiency is
paramount.
internalField():
internalFieldRef():
Provides access to the DimensionedField<Type, GeoMesh> of values on
the internal mesh-type for which the GeometricField is defined and
supports dimension and checking and mesh-consistency checking.
In order to simplify expressions involving dimensioned internal field it
is preferable to use a simpler access convention. Given that
GeometricField is derived from DimensionedField it is simply a matter of
de-referencing this underlying type unlike the boundary field which is
peripheral information. For consistency with the new convention in
"tmp" "dimensionedInteralFieldRef()" has been renamed "ref()".
Non-const access to the internal field now obtained from a specifically
named access function consistent with the new names for non-canst access
to the boundary field boundaryFieldRef() and dimensioned internal field
dimensionedInternalFieldRef().
See also commit 22f4ad32b1
When the GeometricBoundaryField template class was originally written it
was a separate class in the Foam namespace rather than a sub-class of
GeometricField as it is now. Without loss of clarity and simplifying
code which access the boundary field of GeometricFields it is better
that GeometricBoundaryField be renamed Boundary for consistency with the
new naming convention for the type of the dimensioned internal field:
Internal, see commit 4a57b9be2e
This is a very simple text substitution change which can be applied to
any code which compiles with the OpenFOAM-dev libraries.
Given that the type of the dimensioned internal field is encapsulated in
the GeometricField class the name need not include "Field"; the type
name is "Internal" so
volScalarField::DimensionedInternalField -> volScalarField::Internal
In addition to the ".dimensionedInternalField()" access function the
simpler "()" de-reference operator is also provided to greatly simplify
FV equation source term expressions which need not evaluate boundary
conditions. To demonstrate this kEpsilon.C has been updated to use
dimensioned internal field expressions in the k and epsilon equation
source terms.
There is a need to specify const or non-const access to a non-const
object which is not currently possible with the "boundaryField()" access
function the const-ness of the return of which is defined by the
const-ness of the object for which it is called. For consistency with
the latest "tmp" storage class in which non-const access is obtained
with the "ref()" function it is proposed to replace the non-const form
of "boundaryField()" with "boundaryFieldRef()".
Thanks to Mattijs Janssens for starting the process of migration to
"boundaryFieldRef()" and providing a patch for the OpenFOAM and
finiteVolume libraries.
in case of tmp misuse.
Simplified tmp reuse pattern in field algebra to use tmp copy and
assignment rather than the complex delayed call to 'ptr()'.
Removed support for unused non-const 'REF' storage of non-tmp objects due to C++
limitation in constructor overloading: if both tmp(T&) and tmp(const T&)
constructors are provided resolution is ambiguous.
The turbulence libraries have been upgraded and '-DCONST_TMP' option
specified in the 'options' file to switch to the new 'tmp' behavior.
Moved file path handling to regIOobject and made it type specific so
now every object can have its own rules. Examples:
- faceZones are now processor local (and don't search up anymore)
- timeStampMaster is now no longer hardcoded inside IOdictionary
(e.g. uniformDimensionedFields support it as well)
- the distributedTriSurfaceMesh is properly processor-local; no need
for fileModificationChecking manipulation.
